Star I Controller

Input/Output Numbering

on Controller and MIRO Devices

Star I Family Input/Output Logic

• Star I Controller - Host Connected: 32 inputs and 16 outputs on any combination of up to 9 MIRO devices.

• Star I Controller - Stand Alone: 64 inputs and 32 outputs on any combination of up to 9 MIRO devices.

• The Star I Controller has 16 Inputs and 4 Relays on the main board itself. The on-board 16/4 I/O is defaulted as MIRO #1. DIP Switch settings can re-address the on-board MIRO to any other address if required by the installation. If the Address is set to 10, the MIRO is disabled.