Starkey Hearing Solutions Guide
3
At Starkey Hearing Technologies, we believe
innovative technology and personal service go
hand in hand. That’s why we back the world’s most
advanced hearing products with superior customer
service and support so you can be confident that
you have the resources of a world-leading company
right behind you. With two outstanding technology
platforms, Summit and Kinnect, to choose from
we have the perfect solution for every patient.
Innovation in Action
4… Hearing Solutions Summary
5… Feature Reference Guide
6… Summit RIC 312t
8… Summit RIC 312t AP
10… Summit Mini BTE 312
12… Summit BTE 13
14… Summit Power Plus BTE 13
16… Summit EasyFit CIC 10
17… Summit ITE
18… Summit ITC
19… Summit CIC
20… Kinnect Wireless BTE w40 13
21… CROS System
22… SurfLink Accessories
24… Software Quicktips: Summit
26… Software Quicktips: Kinnect
Contents
54
w50 / w40 / w30
KINNECT WIRELESS
Standard Colors
Kinnect Special Edition Colors
TRULINK TECHNOLOGY
FITTING GUIDE
COLOR GUIDE
BEH IND-THE-EARBTE 13
*Results will vary based on wireless usage.
TruLink Programmer
TruLink App
Compatibility:
iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPad Air, iPad Air 2, iPad (4th generation), iPad mini with Retina display, iPad mini, iPad mini 3 and iPod touch (5th generation).
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 131 134 120 123
HFA OSPL90 (dB SPL) 120 N/A 110 N/A
RTF OSPL90 (dB SPL) N/A 133 N/A 115
Peak Gain (dB) 70 74 64 67
HFA Full-On Gain (dB) 63 N/A 52 N/A
RTF Full-On Gain (dB) N/A 74 N/A 56
Frequency Range (Hz) 100-7400 100-7400 100-7400 100-7400
Reference Test Freq. (kHz) N/A 1.6 N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 43 58 33 40
Harmonic Distortion
500 Hz (%) <5 <5 <5 <5
800 Hz (%) <2 <2 <2 <2
1600 Hz (%) <1 <1 <1 <1
ANSI/IEC Battery Current (mA)
1.5 1.5 1.5 1.5
Idle Current (mA) 1.4 1.4 1.4 1.4
Estimated Battery Life for 16-Hour Day
13 Zinc Air (days) 9-13* 9-13* 9-13* 9-13*
EARHOOK THIN TUBE(Size 3, Occluded)
Matrix 131/70
13Battery Size
Kinnect BTE 13 fitting range.
OSPL90 (gray) and Full-On Gain (black) curves for the Kinnect BTE 13 with Earhook.
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
15
25
35
45
55
65
75
85
65
75
85
95
105
115
125
135
100 1000 10000
OSPL90 (gray) and Full-On Gain (black) curves for the Kinnect BTE 13 with Thin Tube.
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
60
70
80
90
100
110
120
130
15
25
35
45
55
65
75
85
100 1000 10000
)L
H( B
d ni l eve
L g
ni r aeH
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4K
Standard Colors
BTE 13Fitting Guide
Color Guide
Multiflex Tinnitus Technology
OSPL90 (gray) and Full-On Gain (black) curves for the Summit BTE 13 with Earhook.
OSPL90 (gray) and Full-On Gain (black) curves for the Summit BTE 13 with Thin Tube.
)L
H( B
d ni l eve
L g
ni r aeH
Frequency (Hz)
-10
0
10
20
30
40
50
60
70
80
90
100
110
120250 500 1K 2K 8K4K
Summit BTE 13 fitting range.
SurfLink Accessory Compatibility
CROS Compatibility
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 130 137 122 127
HFA OSPL90 (dB SPL) 122 N/A 113 N/A
RTF OSPL90 (dB SPL) N/A 136 N/A 119
Peak Gain (dB) 70 75 68 73
HFA Full-On Gain (dB) 62 N/A 57 N/A
RTF Full-On Gain (dB) N/A 75 N/A 61
Frequency Range (Hz) <100-7600 <100-7800 <100-4600 <100-6800
Reference Test Freq. (kHz) N/A 2.5 N/A 2.5
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 44 61 36 44
Equivalent Input Noise (dB) 24 29
Harmonic Distortion
500 Hz (%) <3 <3 <3 <3
800 Hz (%) <5 <5 <3 <3
1600 Hz (%) <3 <3 <3 <3
Induction Coil Sensitivity
HFA SPLITS (ANSI) (dB SPL) 101 N/A 96 N/A
MASL (IEC) (dB SPL) N/A 101 N/A 93
ANSI/IEC Battery Current (mA)
1.8 1.4 1.6 1.4
Idle Current (mA) 1.3 1.3 1.3 1.3
Estimated Battery Life for 16-Hour Day
13 Zinc Air (days) 9-13 10-14 9-13 10-14
Tinnitus Therapy Stimulus
Max RMS Output (dB SPL) 87 87
Weighted RMS Output Level (dB SPL) 87 87
Max 1/3 Octave Output (dB SPL) 87 87
Matrix 130/70
13Battery Size
EARHOOK THIN TUBE(Size 3, Occluded)
i2400/i2000/i1600
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
65
75
85
95
105
115
125
135
15
25
35
45
55
65
75
85
100 1000 10000
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
65
75
85
95
105
115
125
135
15
25
35
45
55
65
75
85
100 1000 10000
S U M M I T P RODUCTS
Mini Mobile
Mini Mobile
MobileMobile ProgrammerProgrammerMediaMedia RemoteRemoteRemote Microphone
Remote Microphone
Summit mini BTE 312 fitting range.
)L
H( B
d ni l eve
L g
ni r aeH
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4K
OSPL90 (gray) and Full-On Gain (black) curves for the Summit mini BTE 312 with Earhook.
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
60
70
80
90
100
110
120
130
10
20
30
40
50
60
70
80
100 1000 10000
OSPL90 (gray) and Full-On Gain (black) curves for the Summit mini BTE 312 with Thin Tube.
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
60
70
80
90
100
110
120
130
15
25
35
45
55
65
75
85
100 1000 10000
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 130 136 120 126
HFA OSPL90 (dB SPL) 117 N/A 108 N/A
RTF OSPL90 (dB SPL) N/A 121 N/A 112
Peak Gain (dB) 60 66 60 66
HFA Full-On Gain (dB) 51 N/A 49 N/A
RTF Full-On Gain (dB) N/A 57 N/A 57
Frequency Range (Hz) <100-8100 <100-8600 <100-6800 <100-7700
Reference Test Freq. (kHz) N/A 2.5 N/A 2.5
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 40 46 31 37
Equivalent Input Noise (dB) 25 25 32 32
Harmonic Distortion
500 Hz (%) <3 <3 <3 <3
800 Hz (%) <5 <5 <3 <3
1600 Hz (%) <3 <3 <3 <3
Induction Coil Sensitivity
HFA SPLITS (ANSI) (dB SPL) 100 N/A 90 N/A
MASL (IEC) (dB SPL) N/A 87 N/A 86
ANSI/IEC Battery Current (mA)
1.5 1.4 1.4 1.4
Idle Current (mA) 1.3 1.3 1.3 1.3
Estimated Battery Life for 16-Hour Day
312 Zinc Air (days) 7-9 7-9 7-9 7-9
Tinnitus Therapy Stimulus
Max RMS Output (dB SPL) 87 87
Weighted RMS Output Level (dB SPL) 87 87
Max 1/3 Octave Output (dB SPL) 87 87
Matrix 130/60
312Battery Size
EARHOOK THIN TUBE(Size 3, Occluded)
MIN
I BTE 312 i2400/i2000/i1600
Fitting Guide
SurfLink Accessory Compatibility
CROS Compatibility
Standard Colors
Color Guide
Multiflex Tinnitus Technology
S U M M I T P RODUCTS
Mini Mobile
Mini Mobile
MobileMobile ProgrammerProgrammerMediaMedia RemoteRemoteRemote Microphone
Remote Microphone
Feature Reference GuideHearing Solutions SummarySynergy Platform in Summit Hearing Solutions - The benefits:• High Speed Programming
• Twin compresion systems - one for speech, one for music
• Wide input range of 110dB
• 16 adjustable processing channels
• Wide 10kHz Bandwidth
• Fully wireless capabilities - streaming accessories direct to the Summit hearing aid
Summit Key Features• Dedicated Music Program: With the new dedicated music program, patients can take advantage of
a unique compression architecture, along with new programming and fitting rationales designed to enhance the quality and listening experience of music.
• Acuity Lifescape Analyser: Our environment manager is our most rigorously tested environment detection system ever, designed for today’s complex listening environments, creating pristine sound quality for patients no matter where they are.
• Ear-to-Ear Phone Streaming: Summit is the first Starkey product to offer ear-to-ear phone streaming, allowing patients to enjoy phone conversations in both ears.
• Wireless CROS/BiCROS: Summit is the first Starkey product to offer wireless CROS and BiCROS options on Summit standard styles — mini BTE 312, BTE 13 and Power Plus BTE 13.
• Multiflex Tinnitus Technology: Starkey’s patient-preferred sound stimulus, Multiflex Tinnitus Technology, is available on all styles of Summit.
Kinnect Hearing InstrumentsUsing the TruLink App, the Kinnect Hearing Solutions are directly connected to an iPhone, iPad or iPod Touch, giving the user control of their Kinnect products from their IOS devices.
Kinnect Key Features• Hearing aids that integrate into their lives. By syncing wirelessly with their iPhone and everything it
can do, Kinnect lets patients connect easily with their lives and everything they love to do.
• Enhanced phone communication. Direct streaming of phone calls from the wearer’s iPhone to their Kinnect hearing aids enables clear and comfortable conversations.
• Great sounding music and media. Wearers can stream any music or media played on their iPhone directly to their hearing aids for a more immersive and impressive listening experience.
• Hearing that’s personalised for them. The SoundSpace tool on the TruLink app lets patients make minor adjustments to sound quality to suit their particular preferences.
• Hearing that happens intuitively. Geotagged memories automatically switch modes when the GPS feature on the iPhone detects the patient is in a tagged location.
• An easy way to fine-tune audio on the fly. The visual indicator bar on the TruLink app provides nearly infinite levels of volume settings.
• Improved High Frequency Audibility. Our patented frequency lowering technology, intelligently identifies high-frequency speech cues and replicates them in a lower frequency where they’re easier to hear and understand.
• ISO Compression. Knowing that speech is dynamic, our ISO Compression allows for independent control of soft, moderate and loud-level speech to enable a more personalised approach.
Cust
om P
rodu
cts
Stan
dard
Pro
duct
s
Kinnect Wireless BTE w40
13
Summit CIC
Summit ITC
Summit ITE
Summit EasyFit
CIC
Summit BTE
Power Plus 13
Summit BTE 13
Summit BTE
Mini 312
Summit RIC 312t
131/70
110/40 115/50 120/60 130/70
110/40 115/50 120/60 130/70
110/40 115/50 120/60 130/70
110/40
140/80
130/70
130/60
115/50120/60
Max
imum
Mat
rix
2cc
Coup
ler
13
312 10
312
13
10
13
13
312
312
Batt
ery
Size
12
16
16
16
16
16
16
16
16
Chan
nels
20
4
4
4
4
4
4
4
4
Mem
orie
s
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Tele
coil
Adaptive Directional
Omni Directional
Adaptive Directional
Adaptive Directional
Omni Directional
Adaptive Directional
Adaptive Directional
Adaptive Directional
Adaptive Directional
Dir
ecti
onal
M
icro
phon
e
Multifunction Single Switch
Size Permitting
User VC available
on request
User VC available
on request
T2 Remote
Rocker Switch
Rocker Switch
Multifunction Single Switch
Rocker Switch
User
Con
trol
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Freq
uenc
y
Low
erin
g
8kHz
10kHz
10kHz
10kHz
10kHz
10kHz
10kHz
10kHz
10kHz
Band
wid
th
2.4GHz Made for iPhone
900 Sync or Wired
900 Sync or Wired
900 Sync or Wired
Wired Only
900 Sync or Wired
900 Sync or Wired
900 Sync or Wired
900 Sync Only
Wir
eles
s
Prot
ocol
Direct connection to Apple products
for streaming, remote control, remote mic &
mobile phone use
Remote Control, SurfLink Media,
Remote Mic,SurfLink Mini
Mobile
Remote Control, SurfLink Media,
Remote Mic,SurfLink Mini
Mobile
Remote Control, SurfLink Media,
Remote Mic,SurfLink Mini
Mobile
None
Remote Control, SurfLink Media,
Remote Mic,SurfLink Mini
Mobile
Remote Control, SurfLink Media,
Remote Mic,SurfLink Mini
Mobile
Remote Control, SurfLink Media,
Remote Mic,SurfLink Mini
Mobile
Remote Control, SurfLink Media,
Remote Mic,SurfLink Mini
Mobile
Wir
eles
s
Acce
ssor
ies
Avai
labl
e
76
RIC 312t Parts GuideSummit RIC 312t each
Champagne (64259-810)
Black (64259-806)
Slate (64259-805)
Bronze (64259-802)
Sterling (64259-811)
Espresso (64259-812)
White & Sterling (64259-814)
SnapFit Receivers each
ANGLED LEFT:
50 GainSize 1 23mm (18617-131)
Size 2 27mm (18617-132)
Size 3 31mm (18617-133)
Size 4 34mm (18617-134)
Size 5 38mm (18617-135)
60 GainSize 1 23mm (18623-131) Size 2 27mm (18623-132)Size 3 31mm (18623-133)Size 4 34mm (18623-134)Size 5 38mm (18623-135)
ANGLED RIGHT:
50 GainSize 1 23mm (18616-131)
Size 2 27mm (18616-132)
Size 3 31mm (18616-133)
Size 4 34mm (18616-134)
Size 5 38mm (18616-135)
60 GainSize 1 23mm (18622-131)
Size 2 27mm (18622-132)
Size 3 31mm (18622-133)
Size 4 34mm (18622-134)
Size 5 38mm (18622-135)
Power Domes each
8-10mm (18571-000)
10-12mm (18572-000)
12-14mm (18573-000)
Occluded Comfort Buds 10 pack
5mm (53271-001)
6mm (53271-002)
7mm (53271-003)
9mm (53271-004)
11mm (53271-005)
Open Comfort Buds 10 pack
5mm (53270-001)
6mm (53270-002)
7mm (53270-003)
9mm (53270-004)
11mm (53270-005)
SurfLink Remote Microphone 2
(64068-000)
SurfLink Mini Mobile Adapter
(64368-000)
Mini Mobile System (64068-200)
SurfLink Remote Control
Advanced (60111-602)
Basic (60111-600)
SurfLink Media 2
(64155-600)
SurfLink Programmer
(60007-000)
Indicator Pegs pair
(52245-009)
Hearing Aid Case
(91326-000)
Line in cable for SurfLink Remote Microphone 2(91259-000)
Programming Cable
Long Right each - (01807-200) Long Left each - (01808-200) Short Right each - (01808-300) Short Left each - (01807-300)
Operation Manual
(ENG10-451)
Hear Clear kit 8 pack
(12522-000)
Summit RIC 312t 60
RIC 312t Summit RIC 312t 50
Fitting Range
Hea
rin
g L
evel
in d
B (
HL
)
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4K
Colour Guide
Standard Colours
BronzeSlate Sterling ChampagneBright White with Sterling
Black Espresso
Patient Features
• Tinnitus Technology • Telecoil
Matrices: 115/50, 120/60 Battery Size: 312 50 Gain Data 60 Gain Data
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 115 127 120 131
HFA OSPL90 (dB SPL) 109 N/A 117 N/A
RTF OSPL90 (dB SPL) N/A 119 N/A 127
Peak Gain (dB) 50 63 60 71
HFA Full-On Gain (dB) 45 N/A 56 N/A
RTF Full-On Gain (dB) N/A 55 N/A 65
Frequency Range (Hz)
i1600 <100-9600 <100-9600 <100-9200 <100-9600
Reference Test Freq. (kHz) N/A 1.6 N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 32 44 40 52
Equivalent Input Noise (dB) 26 26 26 26
Harmonic Distortion
500 Hz (%) <3 <3 <3 <3
800 Hz (%) <3 <3 <3 <3
1600 Hz (%) <3 <3 <3 <3
Induction Coil Sensitivity
HFA SPLITS (ANSI) (dB SPL) 84 N/A 95 N/A
MASL (IEC) (dB SPL) N/A 80 N/A 90
ANSI/IEC Battery Current (mA)
1.7* 1.5* 1.9* 1.7*
Idle Current (mA) 1.4* 1.4* 1.5* 1.5*
Estimated Battery Life for 16-Hour Day
312 Zinc Air (days) 6-8* 6-8* 5-7* 5-7*
Tinnitus Therapy Stimulus
Max RMS Output (dB SPL) 87 87
Weighted RMS Output Level (dB SPL) 87 87
Max 1/3 Octave Output (dB SPL) 87 87
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
100 1000 100000
80
70
60
50
40
30
20
10
45
115
105
95
85
75
65
55
125
Matrix 115/50
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
100 1000 1000010
90
80
70
60
50
40
30
20
50
130
120
110
100
90
80
70
60
Matrix 120/60
SUMMIT
• Wireless Connectivity
Compatible with all SurfLink accessories
i160
0
i1600
RECEIVER-IN-CANAL
98
Colour Guide
Standard Colours
BronzeSlate Sterling ChampagneBright White with Sterling
Black Espresso
Patient Features
• Tinnitus Technology • Telecoil
Matrices: 115/50, 120/60 Battery Size: 312
SUMMIT
• Wireless Connectivity
Compatible with all SurfLink accessories
i160
0
Summit RIC 312t AP 60
Summit RIC 312t AP 70
Fitting Range
Hea
rin
g L
evel
in d
B (
HL
)
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4K
RIC 312t APRECEIVER-IN-CANAL Absolute
Power
60 AP Gain Data 70 AP Gain Data
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 123 133 130 140
HFA OSPL90 (dB SPL) 117 N/A 124 N/A
RTF OSPL90 (dB SPL) N/A 130 N/A 139
Peak Gain (dB) 60 70 70 81
HFA Full-On Gain (dB) 54 N/A 65 N/A
RTF Full-On Gain (dB) N/A 66 N/A 78
Frequency Range (Hz)
i1600 <100-5500 <100-5700 <100-5800 <100-5700
Reference Test Freq. (kHz) N/A 1.6 N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 40 55 47 64
Equivalent Input Noise (dB) 26 26 26 26
Harmonic Distortion
500 Hz (%) <3 <3 <3 <3
800 Hz (%) <3 <3 <3 <3
1600 Hz (%) <3 <3 <3 <3
Induction Coil Sensitivity
HFA SPLITS (ANSI) (dB SPL) 93 N/A 104 N/A
MASL (IEC) (dB SPL) N/A 91 N/A 103
ANSI/IEC Battery Current (mA)
1.4* 1.4* 1.9* 1.5*
Idle Current (mA) 1.4* 1.3* 1.5* 1.4*
Estimated Battery Life for 16-Hour Day
312 Zinc Air (days) 6-8* 6-8* 5-7* 5-7*
Tinnitus Therapy Stimulus
Max RMS Output (dB SPL) 87 87
Weighted RMS Output Level (dB SPL) 87 87
Max 1/3 Octave Output (dB SPL) 87 87
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
100 1000 1000020
100
90
80
70
60
50
40
30
60
140
130
120
110
100
90
80
70
Matrix 130/70
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
100 1000 1000010
90
80
70
60
50
40
30
20
50
130
120
110
100
90
80
70
60
Matrix 123/60
i1600
RIC 312t AP Parts GuideSummit RIC 312t AP each
Champagne (64259-810)
Black (64259-806)
Slate (64259-805)
Bronze (64259-802)
Sterling (64259-811)
Espresso (64259-812)
White & Sterling (64259-814)
SnapFit Receivers each
ANGLED LEFT:
50 GainSize 1 23mm (18617-131)
Size 2 27mm (18617-132)
Size 3 31mm (18617-133)
Size 4 34mm (18617-134)
Size 5 38mm (18617-135)
60 GainSize 1 23mm (18623-131) Size 2 27mm (18623-132)Size 3 31mm (18623-133)Size 4 34mm (18623-134)Size 5 38mm (18623-135)
ANGLED RIGHT:
50 GainSize 1 23mm (18616-131)
Size 2 27mm (18616-132)
Size 3 31mm (18616-133)
Size 4 34mm (18616-134)
Size 5 38mm (18616-135)
60 GainSize 1 23mm (18622-131)
Size 2 27mm (18622-132)
Size 3 31mm (18622-133)
Size 4 34mm (18622-134)
Size 5 38mm (18622-135)
Indicator Pegs pair
(52245-009)
mPower (AP) Receivers each
60dB Gain SnapFit with custom mould (SA TR60)
70dB Gain SnapFit with custom mould (SA TR70)
Power Domes each
8-10mm (18571-000)
10-12mm (18572-000)
12-14mm (18573-000)
Occluded Comfort Buds 10 pack
5mm (53271-001)
6mm (53271-002)
7mm (53271-003)
9mm (53271-004)
11mm (53271-005)
Open Comfort Buds 10 pack
5mm (53270-001)
6mm (53270-002)
7mm (53270-003)
9mm (53270-004)
11mm (53270-005)
SurfLink Remote Microphone 2
(64068-000)
SurfLink Mini Mobile Adapter
(64368-000)
Mini Mobile System (64068-200)
SurfLink Remote Control
Advanced (60111-602)
Basic (60111-600)
SurfLink Media 2
(64155-600)
SurfLink Programmer
(60007-000)
Operation Manual
(ENG10-451)
Hearing Aid Case
(91326-000)
Line in cable for SurfLink Remote Microphone 2(91259-000)
Programming Cable
Long Right each - (01807-200) Long Left each - (01808-200) Short Right each - (01808-300) Short Left each - (01807-300)
Hear Clear kit 8 pack
(12522-000)
1110
SUMMIT
BEHIND-THE-EAR
Summit mini BTE 312 60
Fitting RangeBTE 312MIN
I
Hea
rin
g L
evel
in d
B (
HL
)
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4K
Colour Guide
Standard Colours
BronzeSlate Sterling ChampagneBright White with Sterling
Black Espresso
Patient Features
• Tinnitus Technology
• CROS System*
• Telecoil
• Wireless Connectivity*
Compatible with all SurfLink accessories*
Earhook Thin Tube
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 130 136 120 126
HFA OSPL90 (dB SPL) 117 N/A 108 N/A
RTF OSPL90 (dB SPL) N/A 121 N/A 112
Peak Gain (dB) 60 66 60 66
HFA Full-On Gain (dB) 51 N/A 49 N/A
RTF Full-On Gain (dB) N/A 57 N/A 57
Frequency Range (Hz)
i1600 / 1600 <100-8100 <100-8600 <100-6800 <100-7700
Reference Test Freq. (kHz) N/A 2.5 N/A 2.5
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 40 46 31 37
Equivalent Input Noise (dB) 25 25 32 32
Harmonic Distortion
500 Hz (%) <3 <3 <3 <3
800 Hz (%) <5 <5 <3 <3
1600 Hz (%) <3 <3 <3 <3
Induction Coil Sensitivity
HFA SPLITS (ANSI) (dB SPL) 100 N/A 90 N/A
MASL (IEC) (dB SPL) N/A 87 N/A 86
ANSI/IEC Battery Current (mA)
1.5* 1.4* 1.4* 1.4*
Idle Current (mA) 1.3* 1.3* 1.3* 1.3*
Estimated Battery Life for 16-Hour Day
312 Zinc Air (days) 7-9* 7-9* 7-9* 7-9*
Tinnitus Therapy Stimulus
Max RMS Output (dB SPL) 87 87
Weighted RMS Output Level (dB SPL) 87 87
Max 1/3 Octave Output (dB SPL) 87 87
*Only available for i1600.
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
60
70
80
90
100
110
120
130
10
20
30
40
50
60
70
80
100 1000 10000
Matrix 130/60with Earhook
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
60
70
80
90
100
110
120
130
15
25
35
45
55
65
75
85
100 1000 10000
Matrix 130/60with Thin Tube
i160
0 /
160
0
Matrices: 130/60 Battery Size: 312
Mini BTE 312 Parts GuideSummit Mini BTE* - wireless (312) 5 pack
Champagne (64172-810)
Black (64172-806)
Slate (64172-805)
Bronze (64172-802)
Sterling (64172-811)
Espresso (64172-812)
White & Sterling (64172-814)
Summit Mini BTE - wired (312) 5 pack
Champagne (64149-810)
Black (64149-806)
Slate (64149-805)
Bronze (64149-802)
Sterling (64149-811)
Espresso (64149-812)
White & Sterling (64149-814)
Thin Tube 5 pack
Summit Mini BTE - CROS/BiCROS* (312) 5 pack Left:
0 (53134-000)
1 (53134-001)
2 (53134-002)
3 (53134-003)
4 (53134-004)
5 (53134-005)
3+ (53134-006)
4+ (53134-007)
5+ (53134-008)
Right:
0 (53135-000)
1 (53135-001)
2 (53135-002)
3 (53135-003)
4 (53135-004)
5 (53135-005)
3+ (53135-006)
4+ (53135-007)
5+ (53135-008)
Champagne (64193-810) Bronze (64193-802) White & Sterling (64193-814)
Black (64193-806) Sterling (64193-811)
Slate (64193-805) Espresso (64193-812)
Earhooks 5 pack Indicator Pegs pair
(52245-009)Adult (10141-000)
Paediatric (10142-000)
Power Domes each
8-10mm (18571-000)
10-12mm (18572-000)
12-14mm (18573-000)
Occluded Comfort Buds 10 pack
5mm (53271-001)
6mm (53271-002)
7mm (53271-003)
9mm (53271-004)
11mm (53271-005)
Open Comfort Buds 10 pack
5mm (53270-001)
6mm (53270-002)
7mm (53270-003)
9mm (53270-004)
11mm (53270-005)
SurfLink Remote Microphone 2
(64068-000)
SurfLink Mini Mobile Adapter
(64368-000)
Mini Mobile System (64068-200)
SurfLink Remote Control
Advanced (60111-602)
Basic (60111-600)
SurfLink Media 2
(64155-600)
SurfLink Programmer
(60007-000)
Operation Manual
(ENG10-450)
Hearing Aid Case
(91326-000)
Flex Strip
(65464-000)
Programming Cable
Long Right each - (01807-200) Long Left each - (01808-200) Short Right each - (01808-300) Short Left each - (01807-300)
Line in cable for SurfLink Remote Microphone 2(91259-000)
i1600 / 1600
*Summit Mini BTE - Wireless & Summit Mini BTE - CROS/BiCROS must be ordered together for CROS/BICROS Hearing System.
1312
BTE 13 Parts Guide
SUMMIT
Colour Guide
Standard Colours
BronzeSlate Sterling ChampagneBright White with Sterling
Black Espresso
Patient Features
• Tinnitus Technology
• CROS System*
• Telecoil
• Wireless Connectivity*
Compatible with all SurfLink accessories*
*Only available for i1600.
i160
0 /
160
0
Matrices: 130/60 Battery Size: 312 Earhook Thin Tube
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 130 137 122 127
HFA OSPL90 (dB SPL) 122 N/A 113 N/A
RTF OSPL90 (dB SPL) N/A 136 N/A 119
Peak Gain (dB) 70 75 68 73
HFA Full-On Gain (dB) 62 N/A 57 N/A
RTF Full-On Gain (dB) N/A 75 N/A 61
Frequency Range (Hz)
i1600 / 1600 <100-7600 <100-7800 <100-4600 <100-6800
Reference Test Freq. (kHz) N/A 2.5 N/A 2.5
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 44 61 36 44
Equivalent Input Noise (dB) 24 24 29 29
Harmonic Distortion
500 Hz (%) <3 <3 <3 <3
800 Hz (%) <5 <5 <3 <3
1600 Hz (%) <3 <3 <3 <3
Induction Coil Sensitivity
HFA SPLITS (ANSI) (dB SPL) 101 N/A 96 N/A
MASL (IEC) (dB SPL) N/A 101 N/A 93
ANSI/IEC Battery Current (mA)
1.8* 1.4* 1.6* 1.4*
Idle Current (mA) 1.3* 1.3* 1.3* 1.3*
Estimated Battery Life for 16-Hour Day
13 Zinc Air (days) 9-13* 10-14* 9-13* 10-14*
Tinnitus Therapy Stimulus
Max RMS Output (dB SPL) 87 87
Weighted RMS Output Level (dB SPL) 87 87
Max 1/3 Octave Output (dB SPL) 87 87
Summit BTE 13 70
Fitting Range
Hea
rin
g L
evel
in d
B (
HL
)
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4K
BTE 13BEHIND-THE-EAR
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
65
75
85
95
105
115
125
135
15
25
35
45
55
65
75
85
100 1000 10000
Matrix 130/70with Earhook
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
65
75
85
95
105
115
125
135
15
25
35
45
55
65
75
85
100 1000 10000
Matrix 130/70with Thin Tube
i1600 / 1600 Summit BTE* - wireless (13) 5 pack
Champagne (64182-810)
Black (64182-806)
Slate (64182-805)
Bronze (64182-802)
Sterling (64182-811)
Espresso (64182-812)
White & Sterling (64182-814)
Summit BTE - wired (13) 5 pack
Champagne (64187-810)
Black (64187-806)
Slate (64187-805)
Bronze (64187-802)
Sterling (64187-811)
Espresso (64187-812)
White & Sterling (64187-814)
Thin Tube 5 pack
Summit BTE - CROS/BiCROS* (13) 5 pack Left:
0 (53134-000)
1 (53134-001)
2 (53134-002)
3 (53134-003)
4 (53134-004)
5 (53134-005)
3+ (53134-006)
4+ (53134-007)
5+ (53134-008)
Right:
0 (53135-000)
1 (53135-001)
2 (53135-002)
3 (53135-003)
4 (53135-004)
5 (53135-005)
3+ (53135-006)
4+ (53135-007)
5+ (53135-008)
Champagne (64299-810) Bronze (64299-802) White & Sterling (64299-814)
Black (64299-806) Sterling (64299-811)
Slate (64299-805) Espresso (64299-812)
Earhooks 5 pack Indicator Pegs pair
(52245-009)Adult (10141-000)
Paediatric (10142-000)
Power Domes each
8-10mm (18571-000)
10-12mm (18572-000)
12-14mm (18573-000)
Occluded Comfort Buds 10 pack
5mm (53271-001)
6mm (53271-002)
7mm (53271-003)
9mm (53271-004)
11mm (53271-005)
Open Comfort Buds 10 pack
5mm (53270-001)
6mm (53270-002)
7mm (53270-003)
9mm (53270-004)
11mm (53270-005)
SurfLink Remote Microphone 2
(64068-000)
SurfLink Mini Mobile Adapter
(64368-000)
Mini Mobile System (64068-200)
SurfLink Remote Control
Advanced (60111-602)
Basic (60111-600)
SurfLink Media 2
(64155-600)
SurfLink Programmer
(60007-000)
Operation Manual
(ENG10-450)
Hearing Aid Case
(91326-000)
Line in cable for SurfLink Remote Microphone 2(91259-000)
Programming Cable
Long Right each - (01807-200) Long Left each - (01808-200) Short Right each - (01808-300) Short Left each - (01807-300)
*Summit BTE - Wireless & Summit BTE - CROS/BiCROS must be ordered together for CROS/BICROS Hearing System.
1514
Power Plus BTE 13 Parts GuideBEHIND-THE-EAR
Summit Power Plus BTE 13
Fitting Range
POWER PLUS BTE 13
Hea
rin
g L
evel
in d
B (
HL
)
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4K
Colour Guide
Standard Colours
BronzeSlate Sterling ChampagneBright White with Sterling
Black Espresso
Patient Features
• Tinnitus Technology
• CROS System*
• Telecoil
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
15
25
35
45
55
65
75
85
95
65
75
85
95
105
115
125
135
145
100 1000 10000
Matrix 140/80with Earhook
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
15
25
35
45
55
65
75
85
95
65
75
85
95
105
115
125
135
145
100 1000 10000
Matrix 140/80with Thin Tube
Earhook Thin Tube
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 140 142 132 136
HFA OSPL90 (dB SPL) 131 N/A 118 N/A
RTF OSPL90 (dB SPL) N/A 136 N/A 125
Peak Gain (dB) 80 84 76 82
HFA Full-On Gain (dB) 72 N/A 59 N/A
RTF Full-On Gain (dB) N/A 78 N/A 69
Frequency Range (Hz)
i1600 / 1600 <100-5100 <100-6400 <100-5700 <100-7000
Reference Test Freq. (kHz) N/A 1.6 N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 54 61 41 50
Equivalent Input Noise (dB) 23 23 23 23
Harmonic Distortion
500 Hz (%) <3 <3 <3 <3
800 Hz (%) <3 <3 <3 <3
1600 Hz (%) <3 <3 <3 <3
Induction Coil Sensitivity
HFA SPLITS (ANSI) (dB SPL) 112 N/A 99 N/A
MASL (IEC) (dB SPL) 98 N/A 87 N/A
ANSI/IEC Battery Current (mA)
2.5* 1.8* 2.5* 1.8*
Idle Current (mA) 1.5* 1.5* 1.5* 1.5*
Estimated Battery Life for 16-Hour Day
13 Zinc Air (days) 7-10* 7-10* 7-10* 7-10*
Tinnitus Therapy Stimulus
Max RMS Output (dB SPL) 87 87
Weighted RMS Output Level (dB SPL) 87 87
Max 1/3 Octave Output (dB SPL) 87 87
Matrices: 140/80 Battery Size: 13
i1600 / 1600SUMMIT / IP RATING 68
• Wireless Connectivity*
Compatible with all SurfLink accessories*
i160
0 /
160
0
*Only available for i1600.
Summit Power Plus BTE* - wireless (13) 5 pack
Champagne (64519-810)
Black (64519-806)
Slate (64519-805)
Bronze (64519-802)
Sterling (64519-811)
Espresso (64519-812)
White & Sterling (64519-814)
Summit Power Plus BTE - wired (13) 5 pack
Champagne (64514-810)
Black (64514-806)
Slate (64514-805)
Bronze (64514-802)
Sterling (64514-811)
Espresso (64514-812)
White & Sterling (64514-814)
Thin Tube 5 pack
Summit Power Plus BTE - CROS/BiCROS* (13) 5 pack Left:
0 (53134-000)
1 (53134-001)
2 (53134-002)
3 (53134-003)
4 (53134-004)
5 (53134-005)
3+ (53134-006)
4+ (53134-007)
5+ (53134-008)
Right:
0 (53135-000)
1 (53135-001)
2 (53135-002)
3 (53135-003)
4 (53135-004)
5 (53135-005)
3+ (53135-006)
4+ (53135-007)
5+ (53135-008)
Champagne (64522-810) Bronze (64522-802) White & Sterling (64522-814)
Black (64522-806) Sterling (64522-811)
Slate (64522-805) Espresso (64522-812)
Earhooks 5 pack Indicator Pegs pair
(52245-009)Adult (10141-000)
Paediatric (10142-000)
Power Domes each
8-10mm (18571-000)
10-12mm (18572-000)
12-14mm (18573-000)
Occluded Comfort Buds 10 pack
5mm (53271-001)
6mm (53271-002)
7mm (53271-003)
9mm (53271-004)
11mm (53271-005)
Open Comfort Buds 10 pack
5mm (53270-001)
6mm (53270-002)
7mm (53270-003)
9mm (53270-004)
11mm (53270-005)
SurfLink Remote Microphone 2
(64068-000)
SurfLink Mini Mobile Adapter
(64368-000)
Mini Mobile System (64068-200)
SurfLink Remote Control
Advanced (60111-602)
Basic (60111-600)
SurfLink Media 2
(64155-600)
SurfLink Programmer
(60007-000)
Operation Manual
(ENG10-450)
Hearing Aid Case
(91326-000)
Line in cable for SurfLink Remote Microphone 2(91259-000)
Programming Cable
Long Right each - (01807-200) Long Left each - (01808-200) Short Right each - (01808-300) Short Left each - (01807-300)
*Summit Power Plus BTE - Wireless & Summit Power Plus BTE - CROS/BiCROS must be ordered together for CROS/BICROS Hearing System.
1716
EasyFit CIC 10 Parts GuideSummit EasyFit CIC (10) 5 pack
BLUE - LEFTExtra Small (XS) (64534-816)
Small (S) (64534-826)
Medium (M) (64534-836)
RED - RIGHTExtra Small (XS) (64535-816)
Small (S) (64535-826)
Medium (M) (64535-836)
Programming Cable
Long Right each - (01807-200) Long Left each - (01808-200) Short Right each - (01808-300) Short Left each - (01807-300)
Flex Strip
(65464-000)
Hearing Aid Case
(91326-000)
Hear Clear kit 8 pack
(12522-000)
Operation Manual
(ENG10-450)
ITE Parts GuideSummit ITE Summit ITE (MIC K71)
Programming Cable
Long Right each - (01807-200) Long Left each - (01808-200) Short Right each - (01808-300) Short Left each - (01807-300)
Flex Strip
(65464-000)
Operation Manual
(ENG10-452)
CIC Gain Data
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 110 118
HFA OSPL90 (dB SPL) 106 N/A
RTF OSPL90 (dB SPL) N/A 110
Peak Gain (dB) 50-40 51
HFA Full-On Gain (dB) 36 N/A
RTF Full-On Gain (dB) N/A 44
Frequency Range (Hz)
1600 <100-9400 <100-9700
Reference Test Freq. (kHz) N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 29 35
Equivalent Input Noise (dB) <25 <25
Harmonic Distortion
500 Hz (%) <3 <3
800 Hz (%) <3 <3
1600 Hz (%) <3 <3
ANSI/IEC Battery Current (mA)
1.2-1.5* 1.2-1.5*
Idle Current (mA) 1.2-1.3* 1.2-1.3*
Estimated Battery Life for 16-Hour Day
10 Zinc Air (days) 4-7* 4-7*
Tinnitus Therapy Stimulus
Max RMS Output (dB SPL) 87
Weighted RMS Output Level (dB SPL) 87
Max 1/3 Octave Output (dB SPL) 87
UNIVERSAL FIT COMPLETELY-IN-CANAL
Fitting Range
Shell Colours
Colour GuideFaceplate Colour
Medium Brown
Blue/Red
Hea
rin
g L
evel
in d
B (
HL
)
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4K
Summit Easyfit CIC 40
SUMMIT
CIC 10EASY
FIT
Matrices: 110/40 Battery Size: 10 ITE Gain Data
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 115-130 118-130
HFA OSPL90 (dB SPL) 109-123 N/A
RTF OSPL90 (dB SPL) N/A 110-130
Peak Gain (dB) 50-70 54-71
HFA Full-On Gain (dB) 46-64 N/A
RTF Full-On Gain (dB) N/A 46-68
Frequency Range (Hz)
i1600 <100-8200 <100-8900
Reference Test Freq. (kHz) N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 32-46 35-55
Equivalent Input Noise (dB) <25 <25
Harmonic Distortion
500 Hz (%) <3 <3
800 Hz (%) <3 <3
1600 Hz (%) <3 <3
Induction Coil Sensitivity
HFA SPLITS (ANSI) (dB SPL) 95-108 N/A
MASL (IEC) (dB SPL) N/A 83-106
ANSI/IEC Battery Current (mA)
1.3-1.5* 1.3-1.7*
Idle Current (mA) 1.3* 1.3*
Estimated Battery Life for 16-Hour Day
13 Zinc Air (days) 13-16* 13-16*
Tinnitus Therapy Stimulus
Max RMS Output (dB SPL) 87
Weighted RMS Output Level (dB SPL) 87
Max 1/3 Octave Output (dB SPL) 87
The highest matrix of 130/70 is not offered for i1000 tier products.
ITEIN-THE-EAR
Patient Features
• Tinnitus Technology
• Telecoil Option
Fitting Range
Hea
rin
g L
evel
in d
B (
HL
)
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
130
250 500 1K 2K 6K4K 8K
Summit ITE 50
Summit ITE 60
Summit ITE 70
• Wireless ConnectivityShell Colours
Colour GuideFaceplate Colours
Medium Brown
Dark Brown
PinkChestnut Light Brown
Blue/RedPinkClear Light Brown
SUMMIT
Compatible with all SurfLink accessories
i1600
Battery Size: 13Matrices: 115/50, 120/60, 130/70
i1600
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
100 1000 10000
100
90
80
110
120
130
140
150100
90
80
70
60
50
40
30
Matrix 130/70
1600
1918
Patient Features
• Tinnitus Technology
• Telecoil Option
Shell Colours
Colour GuideFaceplate Colours
Medium Brown
Dark Brown
PinkChestnut Light Brown
Blue/RedPinkClear Light Brown
ITCIN-THE-CANAL
Fitting Range
Summit ITC 50
Summit ITC 40
Summit ITC 60
Summit ITC 70
Hea
rin
g L
evel
in d
B (
HL
)
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
130
250 500 1K 2K 6K4K 8K
ITC Gain Data
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 110-130 115-130
HFA OSPL90 (dB SPL) 106-124 N/A
RTF OSPL90 (dB SPL) N/A 106-130
Peak Gain (dB) 40-70 48-71
HFA Full-On Gain (dB) 36-64 N/A
RTF Full-On Gain (dB) N/A 37-68
Frequency Range (Hz)
i1600 <100-9600 <100-9600
Reference Test Freq. (kHz) N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 29-47 30-55
Equivalent Input Noise (dB) <25 <25
Harmonic Distortion
500 Hz (%) <3 <3
800 Hz (%) <3 <3
1600 Hz (%) <3 <3
Induction Coil Sensitivity
HFA SPLITS (ANSI) (dB SPL) 89-108 N/A
MASL (IEC) (dB SPL) N/A 71-105
ANSI/IEC Battery Current (mA)
1.3-1.5* 1.3-1.6*
Idle Current (mA) 1.2-1.3* 1.2-1.3*
Estimated Battery Life for 16-Hour Day
312 Zinc Air (days) 7-10* 7-10*
Tinnitus Therapy Stimulus
Max RMS Output (dB SPL) 87
Weighted RMS Output Level (dB SPL) 87
Max 1/3 Octave Output (dB SPL) 87
Battery Size: 312Matrices: 110/40, 115/50, 120/60, 130/70
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
100 1000 10000
100
90
80
110
120
130
140
150100
90
80
70
60
50
40
30
Matrix 130/70
Battery Size: 312, 10Matrices: 110/40, 115/50, 120/60, 130/70CIC Gain Data
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 110-130 118-130
HFA OSPL90 (dB SPL) 106-124 N/A
RTF OSPL90 (dB SPL) N/A 110-130
Peak Gain (dB) 40-70 51-71
HFA Full-On Gain (dB) 36-63 N/A
RTF Full-On Gain (dB) N/A 44-68
Frequency Range (Hz)
i1600 <100-9400 <100-9700
Reference Test Freq. (kHz) N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 29-47 35-55
Equivalent Input Noise (dB) <25 <25
Harmonic Distortion
500 Hz (%) <3 <3
800 Hz (%) <3 <3
1600 Hz (%) <3 <3
ANSI/IEC Battery Current (mA)
1.2-1.5* 1.2-1.5*
Idle Current (mA) 1.2-1.3* 1.2-1.3*
Estimated Battery Life for 16-Hour Day
312 Zinc Air (days) 7-10* 7-10*
10 Zinc Air (days) 4-7* 4-7*
Tinnitus Therapy Stimulus
Max RMS Output (dB SPL) 87
Weighted RMS Output Level (dB SPL) 87
Max 1/3 Octave Output (dB SPL) 87
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
100 1000 10000
100
90
80
110
120
130
140
150100
90
80
70
60
50
40
30
Matrix 130/70
SUMMIT
i160
0i160
0
Compatible with all SurfLink accessories
• Wireless Connectivity
i1600
Fitting RangeCICCOMPLETELY-IN-CANAL
Summit CIC 50
Summit CIC 40
Summit CIC 60
Summit CIC 70
Hea
rin
g L
evel
in d
B (
HL
)
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
130
250 500 1K 2K 6K4K 8K
Patient Features
• Tinnitus Technology
• Wireless Connectivity
Shell Colours
Colour GuideFaceplate Colours
Medium Brown
Dark Brown
PinkChestnut Light Brown
Blue/RedPinkClear Light Brown
SUMMIT
Compatible with all SurfLink accessories
i1600
CIC Parts GuideSummit CICSummit CIC (MIC TK71)
Programming Cable
Long Right each - (01807-200) Long Left each - (01808-200) Short Right each - (01808-300) Short Left each - (01807-300)
Flex Strip
(65464-000)
Operation Manual
(ENG10-452)
ITC Parts GuideSummit ITC Summit ITC (MIC CK71)
Programming Cable
Long Right each - (01807-200) Long Left each - (01808-200) Short Right each - (01808-300) Short Left each - (01807-300)
Flex Strip
(65464-000)
Operation Manual
(ENG10-452)
2120
w50 / w40 / w30
KINNECT WIRELESS
Standard Colors
Kinnect Special Edition Colors
TRULINK TECHNOLOGY
FITTING GUIDE
COLOR GUIDE
BEH IND-THE-EARBTE 13
*Results will vary based on wireless usage.
TruLink Programmer
TruLink App
Compatibility:
iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPad Air, iPad Air 2, iPad (4th generation), iPad mini with Retina display, iPad mini, iPad mini 3 and iPod touch (5th generation).
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 131 134 120 123
HFA OSPL90 (dB SPL) 120 N/A 110 N/A
RTF OSPL90 (dB SPL) N/A 133 N/A 115
Peak Gain (dB) 70 74 64 67
HFA Full-On Gain (dB) 63 N/A 52 N/A
RTF Full-On Gain (dB) N/A 74 N/A 56
Frequency Range (Hz) 100-7400 100-7400 100-7400 100-7400
Reference Test Freq. (kHz) N/A 1.6 N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 43 58 33 40
Harmonic Distortion
500 Hz (%) <5 <5 <5 <5
800 Hz (%) <2 <2 <2 <2
1600 Hz (%) <1 <1 <1 <1
ANSI/IEC Battery Current (mA)
1.5 1.5 1.5 1.5
Idle Current (mA) 1.4 1.4 1.4 1.4
Estimated Battery Life for 16-Hour Day
13 Zinc Air (days) 9-13* 9-13* 9-13* 9-13*
EARHOOK THIN TUBE(Size 3, Occluded)
Matrix 131/70
13Battery Size
Kinnect BTE 13 fitting range.
OSPL90 (gray) and Full-On Gain (black) curves for the Kinnect BTE 13 with Earhook.
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
15
25
35
45
55
65
75
85
65
75
85
95
105
115
125
135
100 1000 10000
OSPL90 (gray) and Full-On Gain (black) curves for the Kinnect BTE 13 with Thin Tube.
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
60
70
80
90
100
110
120
130
15
25
35
45
55
65
75
85
100 1000 10000
)L
H( B
d ni l eve
L g
ni r aeH
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4K
BTE w40 13 Kinnect BTE w40 13 70
Fitting Range
Hea
rin
g L
evel
in d
B (
HL
)
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4KKINNECT
Colour Guide
BronzeSlate Sterling Champagne White with Sterling
Black with Sterling
Black Espresso
Patient FeaturesCompatible with Trulink App &
Trulink programmer
• Wireless Connectivity
Earhook Thin Tube
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 131 134 120 123
HFA OSPL90 (dB SPL) 120 N/A 110 N/A
RTF OSPL90 (dB SPL) N/A 133 N/A 115
Peak Gain (dB) 70 74 64 67
HFA Full-On Gain (dB) 63 N/A 52 N/A
RTF Full-On Gain (dB) N/A 74 N/A 56
Frequency Range (Hz) <100-7400 <100-7400 <100-7400 <100-7400
Reference Test Freq. (kHz) N/A 1.6 N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 43 58 33 40
Harmonic Distortion
500 Hz (%) <5 <5 <5 <5
800 Hz (%) <2 <2 <2 <2
1600 Hz (%) <1 <1 <1 <1
ANSI/IEC Battery Current (mA)
1.5 1.5 1.5 1.5
Idle Current (mA) 1.4 1.4 1.4 1.4
Estimated Battery Life for 16-Hour Day
13 Zinc Air (days) 9-13* 9-13* 9-13* 9-13*
Standard Colours
FO
G 5
0 (
dB
)
Frequency (Hz)
FOG 50OSPL90
OS
PL
90
(d
BS
PL
)
100 1000 10000
100
90
80
110
120
130
140
150100
90
80
70
60
50
40
30
Matrix 130/70
FO
G 5
0 (
dB
)
Frequency (Hz)
OS
PL
90
(d
BS
PL
)
FOG 50OSPL90
100 1000 10000
100
90
80
110
120
130
140
150100
90
80
70
60
50
40
30
Matrix 130/70
Earh
oo
kTh
in T
ub
e
Matrices: 131/70 Battery Size: 13
w50 / w40 / w30
KINNECT WIRELESS
Standard Colors
Kinnect Special Edition Colors
TRULINK TECHNOLOGY
FITTING GUIDE
COLOR GUIDE
BEH IND-THE-EARBTE 13
*Results will vary based on wireless usage.
TruLink Programmer
TruLink App
Compatibility:
iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPad Air, iPad Air 2, iPad (4th generation), iPad mini with Retina display, iPad mini, iPad mini 3 and iPod touch (5th generation).
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 131 134 120 123
HFA OSPL90 (dB SPL) 120 N/A 110 N/A
RTF OSPL90 (dB SPL) N/A 133 N/A 115
Peak Gain (dB) 70 74 64 67
HFA Full-On Gain (dB) 63 N/A 52 N/A
RTF Full-On Gain (dB) N/A 74 N/A 56
Frequency Range (Hz) 100-7400 100-7400 100-7400 100-7400
Reference Test Freq. (kHz) N/A 1.6 N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 43 58 33 40
Harmonic Distortion
500 Hz (%) <5 <5 <5 <5
800 Hz (%) <2 <2 <2 <2
1600 Hz (%) <1 <1 <1 <1
ANSI/IEC Battery Current (mA)
1.5 1.5 1.5 1.5
Idle Current (mA) 1.4 1.4 1.4 1.4
Estimated Battery Life for 16-Hour Day
13 Zinc Air (days) 9-13* 9-13* 9-13* 9-13*
EARHOOK THIN TUBE(Size 3, Occluded)
Matrix 131/70
13Battery Size
Kinnect BTE 13 fitting range.
OSPL90 (gray) and Full-On Gain (black) curves for the Kinnect BTE 13 with Earhook.
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
15
25
35
45
55
65
75
85
65
75
85
95
105
115
125
135
100 1000 10000
OSPL90 (gray) and Full-On Gain (black) curves for the Kinnect BTE 13 with Thin Tube.
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
60
70
80
90
100
110
120
130
15
25
35
45
55
65
75
85
100 1000 10000
)L
H( B
d ni l eve
L g
ni r aeH
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4K
w50 / w40 / w30
KINNECT WIRELESS
Standard Colors
Kinnect Special Edition Colors
TRULINK TECHNOLOGY
FITTING GUIDE
COLOR GUIDE
BEH IND-THE-EARBTE 13
*Results will vary based on wireless usage.
TruLink Programmer
TruLink App
Compatibility:
iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPad Air, iPad Air 2, iPad (4th generation), iPad mini with Retina display, iPad mini, iPad mini 3 and iPod touch (5th generation).
Measurement ANSI/IEC 2cc Coupler
IEC OES Coupler
ANSI/IEC 2cc Coupler
IEC OES Coupler
Peak OSPL90 (dB SPL) 131 134 120 123
HFA OSPL90 (dB SPL) 120 N/A 110 N/A
RTF OSPL90 (dB SPL) N/A 133 N/A 115
Peak Gain (dB) 70 74 64 67
HFA Full-On Gain (dB) 63 N/A 52 N/A
RTF Full-On Gain (dB) N/A 74 N/A 56
Frequency Range (Hz) 100-7400 100-7400 100-7400 100-7400
Reference Test Freq. (kHz) N/A 1.6 N/A 1.6
HFA Frequencies (kHz) 1.0,1.6,2.5 N/A 1.0,1.6,2.5 N/A
Reference Test Gain (dB) 43 58 33 40
Harmonic Distortion
500 Hz (%) <5 <5 <5 <5
800 Hz (%) <2 <2 <2 <2
1600 Hz (%) <1 <1 <1 <1
ANSI/IEC Battery Current (mA)
1.5 1.5 1.5 1.5
Idle Current (mA) 1.4 1.4 1.4 1.4
Estimated Battery Life for 16-Hour Day
13 Zinc Air (days) 9-13* 9-13* 9-13* 9-13*
EARHOOK THIN TUBE(Size 3, Occluded)
Matrix 131/70
13Battery Size
Kinnect BTE 13 fitting range.
OSPL90 (gray) and Full-On Gain (black) curves for the Kinnect BTE 13 with Earhook.
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
15
25
35
45
55
65
75
85
65
75
85
95
105
115
125
135
100 1000 10000
OSPL90 (gray) and Full-On Gain (black) curves for the Kinnect BTE 13 with Thin Tube.
)B
d( 0
5 G
OF
Frequency (Hz)
FOG 50OSPL90
)L
PS
Bd(
09
LP
SO
60
70
80
90
100
110
120
130
15
25
35
45
55
65
75
85
100 1000 10000
)L
H( B
d ni l eve
L g
ni r aeH
Frequency (Hz)
0
10
20
30
40
50
60
70
80
90
100
110
120
250 500 1K 2K 8K4K
WIRELESS BEHIND-THE-EAR
BTE w40 13 Parts GuideKinnect Wireless BTE w40 (13) 5 pack Thin Tube 5 packChampagne (65974-810) Black (65974-806) Slate (65974-805) Espresso (65974-812)
Bronze (65974-802) Sterling (65974-811) Black & Sterling (65974-813) White & Sterling (65974-814)Left:
0 (53134-000)
1 (53134-001)
2 (53134-002)
3 (53134-003)
4 (53134-004)
5 (53134-005)
3+ (53134-006)
4+ (53134-007)
5+ (53134-008)
Right:
0 (53135-000)
1 (53135-001)
2 (53135-002)
3 (53135-003)
4 (53135-004)
5 (53135-005)
3+ (53135-006)
4+ (53135-007)
5+ (53135-008)
Earhooks 5 pack
Adult (10141-000)
Paediatric (10142-000)
Programming CableLong Right each - (01807-200)
Long Left each - (01808-200)
Short Right each - (01808-300)
Short Left each - (01807-300)Hearing Aid Case(91326-000)
Operation Manual(ENG10-450)
Trulink Programmer(52950-000)
Power Domes each
8-10mm (18571-000) 10-12mm (18572-000)
12-14mm (18573-000)
Occluded Comfort Buds 10 pack
5mm (53271-001) 6mm (53271-002)
7mm (53271-003) 9mm (53271-004)
11mm (53271-005)
Open Comfort Buds 10 pack
5mm (53270-001) 6mm (53270-002)
7mm (53270-003) 9mm (53270-004)
11mm (53270-005)
The Starkey® CROS System includes products specifically designed for patients who need sound routed to a better hearing ear. Starkey’s CROS solution transmits sound wirelessly from a microphone placed on a patient’s non-functional ear to a receiver fitted on a patient’s better hearing ear. Devices can also be configured as a BiCROS solution for a patient who needs amplification in his or her better hearing ear.
• Clear and consistent wireless streaming using 900sync™ technology
• Acuity OS 2 brings audibility and speech understanding to patients in any environment
• Full Adaptive Directional functionality on the CROS transmitter
• Compatible with Mini BTE 312, BTE 13 and Power Plus BTE 13 hearing aids
• Telecoil standard in Summit CROS receivers
• Compatible with SurfLink™ accessories
Summit mini BTE 312 CROS is compatible with Summit mini BTE 312
Summit BTE 13 CROS is compatible with Summit BTE 13
Summit Power Plus BTE 13 CROS is compatible with Summit Power Plus BTE 13
Compatibility
ModelBattery size
IEC code
ANSI code
Summit mini BTE 312 CROS 312 PR41 7002ZD
Summit BTE 13 CROS 13 PR48 7000ZD
Summit Power Plus BTE 13 CROS 13 PR48 7000ZD
Battery Information
Audio Quality: 20 kHz sampling frequency
Audio Information
Antenna type: Integral Dual Parallel Loop Antenna
Operation frequency: 902-928 MHz
Occupied bandwidth(99% BW):
300 kHz
Modulation: FSK
Operating range: 1 m
Wearing options: Behind-The-Ear
Use case:Streaming of audio signal to receiving hearing aid on the other ear
Transmit Power:
mini BTE 312: -23 dBm BTE 13: -25 dBm Power Plus BTE 13: -22 dBm
Radio Information
Special Features
General Information
Transportation and storage conditions for Zinc Air Products:-40°C (-40°F) to +60°C (140°F) and 10%-95% rH. Your hearing aids are designed to operate beyond the range of temperatures comfortable to you, from very cold up to 50°C (122°F).
Safety Standards:Meets IEC 60601-2-66 safety standard and IEC 60601-1-2 EMC standard.
CROS SYSTEMSUMMIT MINI BTE 312, BTE 13 & POWER PLUS BTE 13
SUMMIT i1600
USASummit mini BTE 312 CROS
Summit BTE 13 CROS
Summit Power Plus BTE 13 CROS
Part 15.249
FCC ID:
EOA-EXPSTANDARD
Part 15.249
FCC ID:
EOA-EXPSTANDARD
Part 15.249
FCC ID:
EOA-EXPSTANDARD
Standards Applied
Compatible with: iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5, iPad Air, iPad Air 2, iPad (4th generation), iPad mini with Retina display, iPad mini, iPad mini 3 and iPod touch (5th generation).
2322
SurfLink accessories offer patients carefree connectivity.
SurfLink Mini Mobile — our new, small and simple mobile phone streaming solution. Connect any Bluetooth-ready mobile device to their Summit hearing aids to stream phone calls. The SurfLink Mini Mobile adapter is compatible with the SurfLink Remote Microphone 2.
• Plug the Mini Mobile into the bottom of the
SurfLink Remote Microphone 2
• Stream calls from any Bluetooth-ready mobile
phone to Summit hearing aidsSurfLink Mini Mobile adapter
SurfLink RemoteMicrophone 2
SurfLinkMini Mobile System
Made for a wireless landscape
SurfLink Mini Mobile
SurfLink Remote Microphone 2
The SurfLink Remote Microphone 2 is designed to stream audio directly to Summit hearing aids. This discreet, lightweight device can be worn by a conversation partner to aid patients in one-on-one conversations or settings with multiple speakers. Patients are able to switch between different modes to optimise their listening experience in these different environments.
SurfLink Programmer
SurfLink Programmer, combined with 900sync technology and Inspire fitting software, gives you the ultimate speed and flexibility in direct-to-hearing aid wireless programming with no relay device.
• Detects your patients’ wireless devices in seconds
• Features at least a 20-foot range
• Frees patients to move around during counselling and demonstrations
• Connects via standard USB cable
• Requires no additional hardware for
the patient
• Is four times faster than HiPro and nearly
twice as fast as NOAHLink
• Streams stereo sound directly from media devices to the patients’ hearing aids without pairing or body-worn relay devices
• Helps prevent patients and companions
from fighting over the volume
SurfLink Media 2
Featuring high-fidelity sound when paired with Summit hearing aids. SurfLink Media 2 lets patients stream from any media device directly to their hearing aids with no intermediary device. SurfLink Media 2:
• Uses Intelligent Media Mobility to allow seamless room-to-room transitions between media devices
• Enables multiple people wearing wireless
hearing aids to connect to a single device
• Eliminates audio delay and lip-sync
issues commonly found with other
wireless systems1
SurfLink Remote
With the optional SurfLink Remote, patients can control memory and volume adjustments, mute their hearing instruments, or go in and out of streaming mode.
Line in Audio Cable
A specially designed cable that plugs into the SurfLink Remote Microphone 2 and allows an audio input from the headphone socket of any device to be streamed from the Remote Microphone.
1Latency is unnoticeable according to International Telecommunications Union standards
2524
Software Quicktips: SummitGet Started1. Launch Inspire X.
2. On the Get Started screen, select View Programmers, then choose the appropriate programmer and select OK.
3. Connect hearing devices to the fitting computer via the appropriate programming accessories. Refer to the Cables and Connectors Guide located under Help in Inspire for additional information regarding connecting the hearing devices. NOTE: If you are fitting a hearing device on the right ear, select Assign Right to designate a hearing device for the right ear.
4. Select the check box next to the hearing device(s) to be programmed.
5. Select Read Device Settings to begin a new fitting or for a follow-up fitting session using the current settings in the hearing devices, or Load a Previous Session to retrieve a previously saved session, then select Start.
Initial Fit and Auto PathInitial Fit launches automatically when programming new hearing devices.
1. Select the appropriate Acoustic Options, then select OK.
2. Select the appropriate Experience with Amplification. Refer to the Experience Manager QuickTIP for additional information.
3. Insert hearing devices into the patient’s ears, reduce all sources of noise, then select Begin to run the Auto Path. NOTE: If hearing device programming is conducted prior to the fitting appointment, re-run the Feedback Canceller with the hearing devices in the patient’s ears.
4. Review the Auto Path results screen. Select Restart if Status is Incomplete for any steps, or select Close to continue.
User ControlsThe User Control Configuration demo box will appear upon initial programming with Inspire X. Select Show Demo for demonstration of user control configuration options, or select Don’t show again and Close. Refer to the User Controls QuickTIP for additional information.
Quickfit and Fine tuning• Select QuickFit on the left navigation bar to make global fitting
adjustments. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
• Select Fine Tuning on the left navigation bar or from the bottom of the QuickFit screen to make detailed fitting adjustments of individual channels and input levels. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
QuickTIPS
GET STARTED
1. Launch Inspire X. 2. On the Get Started screen, select View Programmers, then choose
the appropriate programmer and select OK.3. Connect hearing devices to the fitting computer via the appropriate
programming accessories. Refer to the Cables and Connectors Guide located under Help in Inspire for additional information regarding connecting the hearing devices.NOTE: If you are fitting a hearing device on the right ear, select Assign Right to designate a hearing device for the right ear.
4. Select the check box next to the hearing device(s) to be programmed. 5. Select Read Device Settings to begin a new fitting or for a follow-up
fitting session using the current settings in the hearing devices, or Load a Previous Session to retrieve a previously saved session, then select Start.
MUSE AND SOUNDLENS SYNERGY INITIAL FITTING PROTOCOLPRODUCT AVAILABILITY: Muse and SoundLens Synergy Devices
INITIAL FIT AND AUTO PATH
Initial Fit launches automatically when programming new hearing devices.
1. Select the appropriate Acoustic Options, then select OK.2. Select the appropriate Experience with Amplification. Refer to the
Experience Manager QuickTIP for additional information. 3. Insert hearing devices into the patient’s ears, reduce all sources of
noise, then select Begin to run the Auto Path.NOTE: If hearing device programming is conducted prior to the fitting appointment, re-run the Feedback Canceller with the hearing devices in the patient’s ears.
4. Review the Auto Path results screen. Select Restart if Status is Incomplete for any steps, or select Close to continue.
A product line featuring extended bandwidth, additional channels and bands, ear to ear phone streaming, a dedicated music memory, advanced classification to manage all environments, tinnitus stimulus in all devices, CROS/BiCROS devices, and wireless connectivity to SurfLink accessories.
QUICKFIT AND FINE TUNING » Select QuickFit on the left navigation bar to make global fitting adjustments. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
» Select Fine Tuning on the left navigation bar or from the bottom of the QuickFit screen to make detailed fitting adjustments of individual channels and input levels. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
USER CONTROLS
The User Control Configuration demo box will appear upon initial programming with Inspire X. Select Show Demo for demonstration of user control configuration options, or select Don’t show again and Close. Refer to the User Controls QuickTIP for additional information.
Get Started
Fine Tuning
Initial Fit
QuickTIPS
GET STARTED
1. Launch Inspire X. 2. On the Get Started screen, select View Programmers, then choose
the appropriate programmer and select OK.3. Connect hearing devices to the fitting computer via the appropriate
programming accessories. Refer to the Cables and Connectors Guide located under Help in Inspire for additional information regarding connecting the hearing devices.NOTE: If you are fitting a hearing device on the right ear, select Assign Right to designate a hearing device for the right ear.
4. Select the check box next to the hearing device(s) to be programmed. 5. Select Read Device Settings to begin a new fitting or for a follow-up
fitting session using the current settings in the hearing devices, or Load a Previous Session to retrieve a previously saved session, then select Start.
MUSE AND SOUNDLENS SYNERGY INITIAL FITTING PROTOCOLPRODUCT AVAILABILITY: Muse and SoundLens Synergy Devices
INITIAL FIT AND AUTO PATH
Initial Fit launches automatically when programming new hearing devices.
1. Select the appropriate Acoustic Options, then select OK.2. Select the appropriate Experience with Amplification. Refer to the
Experience Manager QuickTIP for additional information. 3. Insert hearing devices into the patient’s ears, reduce all sources of
noise, then select Begin to run the Auto Path.NOTE: If hearing device programming is conducted prior to the fitting appointment, re-run the Feedback Canceller with the hearing devices in the patient’s ears.
4. Review the Auto Path results screen. Select Restart if Status is Incomplete for any steps, or select Close to continue.
A product line featuring extended bandwidth, additional channels and bands, ear to ear phone streaming, a dedicated music memory, advanced classification to manage all environments, tinnitus stimulus in all devices, CROS/BiCROS devices, and wireless connectivity to SurfLink accessories.
QUICKFIT AND FINE TUNING » Select QuickFit on the left navigation bar to make global fitting adjustments. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
» Select Fine Tuning on the left navigation bar or from the bottom of the QuickFit screen to make detailed fitting adjustments of individual channels and input levels. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
USER CONTROLS
The User Control Configuration demo box will appear upon initial programming with Inspire X. Select Show Demo for demonstration of user control configuration options, or select Don’t show again and Close. Refer to the User Controls QuickTIP for additional information.
Get Started
Fine Tuning
Initial Fit
QuickTIPS
GET STARTED
1. Launch Inspire X. 2. On the Get Started screen, select View Programmers, then choose
the appropriate programmer and select OK.3. Connect hearing devices to the fitting computer via the appropriate
programming accessories. Refer to the Cables and Connectors Guide located under Help in Inspire for additional information regarding connecting the hearing devices.NOTE: If you are fitting a hearing device on the right ear, select Assign Right to designate a hearing device for the right ear.
4. Select the check box next to the hearing device(s) to be programmed. 5. Select Read Device Settings to begin a new fitting or for a follow-up
fitting session using the current settings in the hearing devices, or Load a Previous Session to retrieve a previously saved session, then select Start.
MUSE AND SOUNDLENS SYNERGY INITIAL FITTING PROTOCOLPRODUCT AVAILABILITY: Muse and SoundLens Synergy Devices
INITIAL FIT AND AUTO PATH
Initial Fit launches automatically when programming new hearing devices.
1. Select the appropriate Acoustic Options, then select OK.2. Select the appropriate Experience with Amplification. Refer to the
Experience Manager QuickTIP for additional information. 3. Insert hearing devices into the patient’s ears, reduce all sources of
noise, then select Begin to run the Auto Path.NOTE: If hearing device programming is conducted prior to the fitting appointment, re-run the Feedback Canceller with the hearing devices in the patient’s ears.
4. Review the Auto Path results screen. Select Restart if Status is Incomplete for any steps, or select Close to continue.
A product line featuring extended bandwidth, additional channels and bands, ear to ear phone streaming, a dedicated music memory, advanced classification to manage all environments, tinnitus stimulus in all devices, CROS/BiCROS devices, and wireless connectivity to SurfLink accessories.
QUICKFIT AND FINE TUNING » Select QuickFit on the left navigation bar to make global fitting adjustments. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
» Select Fine Tuning on the left navigation bar or from the bottom of the QuickFit screen to make detailed fitting adjustments of individual channels and input levels. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
USER CONTROLS
The User Control Configuration demo box will appear upon initial programming with Inspire X. Select Show Demo for demonstration of user control configuration options, or select Don’t show again and Close. Refer to the User Controls QuickTIP for additional information.
Get Started
Fine Tuning
Initial Fit
Initial Fit in Summit
Memories1. Select Memories on left navigation bar or select
Memories from the middle of all fitting screens.
2. Select drop-down arrows to extend the Memories menu, then select the desired memories to program.
3. If configuring a Music Memory in Summit, refer to the Music Memory QuickTIP.
4. If enabling a Telephone, Autophone, Telecoil, Autocoil, or Loop Memory in Summit, select Configure Phone and Loop Options from the Memories screen. Refer to the Phone Solutions QuickTIP for additional information. NOTE: Select microphone offset if enabling a Loop or Phone memory.
5. Select Additional Configuration Options from the Memories screen to Copy, Move, or Link memories and adjust the Telephone Release.
AccessoriesSelect Accessories on the left navigation bar to configure SurfLink accessories. Refer to the SurfLink QuickTIPs for additional information.
Indicators1. Select Indicators on the left navigation bar.
2. Select or de-select check boxes to enable or disable indicators. NOTE: Volume indicators may be enabled or disabled on an individual basis.
3. Select Adjust All Indicators to increase or decrease volume level for all Tone or Speech/Chimes indicators in 5 dB increments, or to change the voice language.
4. Select the Individual Indicator names to adjust the volume level and stimulus type for individual indicators, then select Play to play indicator directly through devices or Demo to play indicator through loudspeaker for demonstration purposes.
Additional AdjustmentsRefer to the QuickTIP library for additional information regarding programming of Experience Manager, Frequency Lowering, Environment Manager, and Tinnitus.
Fitting Summary1. Select Fitting Summary on the left navigation bar.
2. Select feature names or details to change status of features if necessary. Feature names are hyperlinks and will navigate to the adjustment screens.
3. Select Print button to generate a one page Fitting Report or a personalised Device Guide.
4. Select Save button to save current fitting session.
FITTING SUMMARY
1. Select Fitting Summary on the left navigation bar.2. Select feature names or details to change status of features if
necessary. Feature names are hyperlinks and will navigate to the adjustment screens.
3. Select Print button to generate a one page Fitting Report or a personalized Device Guide.
4. Select Save button to save current fitting session.
MEMORIES
1. Select Memories on left navigation bar or select Memories from the middle of all fitting screens.
2. Select drop-down arrows to extend the Memories menu, then select the desired memories to program.
3. If configuring a Music Memory, refer to the Music Memory QuickTIP.4. If enabling a Telephone, Autophone, Telecoil, Autocoil, or Loop
Memory, select Configure Phone and Loop Options from the Memories screen. Refer to the Phone Solutions QuickTIP for additional information.NOTE: Select microphone offset if enabling a Loop or Phone memory.
5. Select Additional Configuration Options from the Memories screen to Copy, Move, or Link memories and adjust the Telephone Release.
ACCESSORIES
Select Accessories on the left navigation bar to configure SurfLink accessories. Refer to the SurfLink QuickTIPs for additional information.
INDICATORS
1. Select Indicators on the left navigation bar. 2. Select or de-select check boxes to enable or disable indicators.
NOTE: Volume indicators may be enabled or disabled on an individual basis.
3. Select Adjust All Indicators to increase or decrease volume level for all Tone or Speech/Chimes indicators in 5 dB increments, or to change the voice language.
4. Select the Individual Indicator names to adjust the volume level and stimulus type for individual indicators, then select Play to play indicator directly through devices or Demo to play indicator through loudspeaker for demonstration purposes.
ADDITIONAL ADJUSTMENTS
Refer to the QuickTIP library for additional information regarding programming of Experience Manager, Frequency Lowering, Environment Manager, and Tinnitus.
Memories
Indicators
Fitting Summary
READY. SET. HEAR.
Ready. Set. Hear. is a one year triggered email program created to help new patients successfully transition into their new hearing devices. Contact your Marketing Representative for additional information.
FITTING SUMMARY
1. Select Fitting Summary on the left navigation bar.2. Select feature names or details to change status of features if
necessary. Feature names are hyperlinks and will navigate to the adjustment screens.
3. Select Print button to generate a one page Fitting Report or a personalized Device Guide.
4. Select Save button to save current fitting session.
MEMORIES
1. Select Memories on left navigation bar or select Memories from the middle of all fitting screens.
2. Select drop-down arrows to extend the Memories menu, then select the desired memories to program.
3. If configuring a Music Memory, refer to the Music Memory QuickTIP.4. If enabling a Telephone, Autophone, Telecoil, Autocoil, or Loop
Memory, select Configure Phone and Loop Options from the Memories screen. Refer to the Phone Solutions QuickTIP for additional information.NOTE: Select microphone offset if enabling a Loop or Phone memory.
5. Select Additional Configuration Options from the Memories screen to Copy, Move, or Link memories and adjust the Telephone Release.
ACCESSORIES
Select Accessories on the left navigation bar to configure SurfLink accessories. Refer to the SurfLink QuickTIPs for additional information.
INDICATORS
1. Select Indicators on the left navigation bar. 2. Select or de-select check boxes to enable or disable indicators.
NOTE: Volume indicators may be enabled or disabled on an individual basis.
3. Select Adjust All Indicators to increase or decrease volume level for all Tone or Speech/Chimes indicators in 5 dB increments, or to change the voice language.
4. Select the Individual Indicator names to adjust the volume level and stimulus type for individual indicators, then select Play to play indicator directly through devices or Demo to play indicator through loudspeaker for demonstration purposes.
ADDITIONAL ADJUSTMENTS
Refer to the QuickTIP library for additional information regarding programming of Experience Manager, Frequency Lowering, Environment Manager, and Tinnitus.
Memories
Indicators
Fitting Summary
READY. SET. HEAR.
Ready. Set. Hear. is a one year triggered email program created to help new patients successfully transition into their new hearing devices. Contact your Marketing Representative for additional information.
FITTING SUMMARY
1. Select Fitting Summary on the left navigation bar.2. Select feature names or details to change status of features if
necessary. Feature names are hyperlinks and will navigate to the adjustment screens.
3. Select Print button to generate a one page Fitting Report or a personalized Device Guide.
4. Select Save button to save current fitting session.
MEMORIES
1. Select Memories on left navigation bar or select Memories from the middle of all fitting screens.
2. Select drop-down arrows to extend the Memories menu, then select the desired memories to program.
3. If configuring a Music Memory, refer to the Music Memory QuickTIP.4. If enabling a Telephone, Autophone, Telecoil, Autocoil, or Loop
Memory, select Configure Phone and Loop Options from the Memories screen. Refer to the Phone Solutions QuickTIP for additional information.NOTE: Select microphone offset if enabling a Loop or Phone memory.
5. Select Additional Configuration Options from the Memories screen to Copy, Move, or Link memories and adjust the Telephone Release.
ACCESSORIES
Select Accessories on the left navigation bar to configure SurfLink accessories. Refer to the SurfLink QuickTIPs for additional information.
INDICATORS
1. Select Indicators on the left navigation bar. 2. Select or de-select check boxes to enable or disable indicators.
NOTE: Volume indicators may be enabled or disabled on an individual basis.
3. Select Adjust All Indicators to increase or decrease volume level for all Tone or Speech/Chimes indicators in 5 dB increments, or to change the voice language.
4. Select the Individual Indicator names to adjust the volume level and stimulus type for individual indicators, then select Play to play indicator directly through devices or Demo to play indicator through loudspeaker for demonstration purposes.
ADDITIONAL ADJUSTMENTS
Refer to the QuickTIP library for additional information regarding programming of Experience Manager, Frequency Lowering, Environment Manager, and Tinnitus.
Memories
Indicators
Fitting Summary
READY. SET. HEAR.
Ready. Set. Hear. is a one year triggered email program created to help new patients successfully transition into their new hearing devices. Contact your Marketing Representative for additional information.
2726
Software Quicktips: KinnectHearing device programming must be completed prior to connecting the hearing devices to the Apple or Android device.
Get StartedExpected range for wireless programming is 30 feet.
1. Turn Bluetooth OFF on Apple or Android devices.
2. Insert fresh battery into hearing devices and close battery doors.
3. Launch Inspire X.
4. On the Get Started screen, select View Programmers, then choose the TruLink programmer and select OK.
5. Select the check box next to the hearing devices(s) to be programmed.
6. Select Read Device Settings to start a new fitting session using the current settings in the hearing devices or Load a Previous Session to retrieve a previously saved session, then select Start. NOTE: Select Performance Update, if applicable, to update the firmware of the devices.
7. Select the appropriate Acoustic Options, then select OK.
Auto PathAuto Path establishes recommended first fit settings for the connected devices based on the patient’s audiogram. Functions include Feedback Canceller, Best Fit, Reset Data Log, Voice Language, and Experience Level.
1. Insert hearing devices into the patient’s ears, reduce all sources of noise, then select Begin.
2. Select the desired Experience Level, then select Next.
3. Review the Auto Path results screen. Select Restart if Status is Incomplete for any steps, or select Close to continue.
User ControlsThe User Control Configuration demo box will appear upon first fitting with Inspire X. Select Show Demo for demonstration of user control configuration options, or select Don’t show again and Close. Refer to the User Controls QuickTIP for additional information.
Quickfit and Fine tuning• Select QuickFit on the left navigation bar to make global fitting
adjustments. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
• Select Fine Tuning on the left navigation bar or from the QuickFit screen to make detailed fitting adjustments of individual channels and input levels. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
QuickTIPS
GET STARTED
Expected range for wireless programming is 30 feet.
1. Turn Bluetooth OFF on Apple or Android devices.2. Insert fresh battery into hearing devices and close battery doors.3. Launch Inspire X. 4. On the Get Started screen, select View Programmers, then choose
the TruLink programmer and select OK.5. Select the check box next to the hearing devices(s) to be
programmed. 6. Select Read Device Settings to start a new fitting session using the
current settings in the hearing devices or Load a Previous Session to retrieve a previously saved session, then select Start.NOTE: Select Performance Update, if applicable, to update the firmware of the devices.
7. Select the appropriate Acoustic Options, then select OK.
KINNECT INITIAL FITTING PROTOCOL
PRODUCT AVAILABILITY: kinnect Devices
A hearing device engineered to connect directly to Apple and Android devices via the TruLink application.
For the most up-to-date information on devices that are supported for use with TruLink, visit www.TruLinkHearing.com
Get Started
Fine Tuning
Auto Path
AUTO PATH
Auto Path establishes recommended first fit settings for the connected devices based on the patient’s audiogram. Functions include Feedback Canceller, Best Fit, Reset Data Log, Voice Language, and Experience Level.
1. Insert hearing devices into the patient’s ears, reduce all sources of noise, then select Begin.
2. Select the desired Experience Level, then select Next.3. Review the Auto Path results screen. Select Restart if Status is
Incomplete for any steps, or select Close to continue.
USER CONTROLS
The User Control Configuration demo box will appear upon first fitting with Inspire X. Select Show Demo for demonstration of user control configuration options, or select Don’t show again and Close. Refer to the User Controls QuickTIP for additional information.
QUICKFIT AND FINE TUNING » Select QuickFit on the left navigation bar to make global fitting adjustments. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
» Select Fine Tuning on the left navigation bar or from the QuickFit screen to make detailed fitting adjustments of individual channels and input levels. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
Hearing device programming must be completed prior to connecting the hearing devices to the Apple or Android device.
QuickTIPS
GET STARTED
Expected range for wireless programming is 30 feet.
1. Turn Bluetooth OFF on Apple or Android devices.2. Insert fresh battery into hearing devices and close battery doors.3. Launch Inspire X. 4. On the Get Started screen, select View Programmers, then choose
the TruLink programmer and select OK.5. Select the check box next to the hearing devices(s) to be
programmed. 6. Select Read Device Settings to start a new fitting session using the
current settings in the hearing devices or Load a Previous Session to retrieve a previously saved session, then select Start.NOTE: Select Performance Update, if applicable, to update the firmware of the devices.
7. Select the appropriate Acoustic Options, then select OK.
KINNECT INITIAL FITTING PROTOCOL
PRODUCT AVAILABILITY: kinnect Devices
A hearing device engineered to connect directly to Apple and Android devices via the TruLink application.
For the most up-to-date information on devices that are supported for use with TruLink, visit www.TruLinkHearing.com
Get Started
Fine Tuning
Auto Path
AUTO PATH
Auto Path establishes recommended first fit settings for the connected devices based on the patient’s audiogram. Functions include Feedback Canceller, Best Fit, Reset Data Log, Voice Language, and Experience Level.
1. Insert hearing devices into the patient’s ears, reduce all sources of noise, then select Begin.
2. Select the desired Experience Level, then select Next.3. Review the Auto Path results screen. Select Restart if Status is
Incomplete for any steps, or select Close to continue.
USER CONTROLS
The User Control Configuration demo box will appear upon first fitting with Inspire X. Select Show Demo for demonstration of user control configuration options, or select Don’t show again and Close. Refer to the User Controls QuickTIP for additional information.
QUICKFIT AND FINE TUNING » Select QuickFit on the left navigation bar to make global fitting adjustments. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
» Select Fine Tuning on the left navigation bar or from the QuickFit screen to make detailed fitting adjustments of individual channels and input levels. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
Hearing device programming must be completed prior to connecting the hearing devices to the Apple or Android device.
QuickTIPS
GET STARTED
Expected range for wireless programming is 30 feet.
1. Turn Bluetooth OFF on Apple or Android devices.2. Insert fresh battery into hearing devices and close battery doors.3. Launch Inspire X. 4. On the Get Started screen, select View Programmers, then choose
the TruLink programmer and select OK.5. Select the check box next to the hearing devices(s) to be
programmed. 6. Select Read Device Settings to start a new fitting session using the
current settings in the hearing devices or Load a Previous Session to retrieve a previously saved session, then select Start.NOTE: Select Performance Update, if applicable, to update the firmware of the devices.
7. Select the appropriate Acoustic Options, then select OK.
KINNECT INITIAL FITTING PROTOCOL
PRODUCT AVAILABILITY: kinnect Devices
A hearing device engineered to connect directly to Apple and Android devices via the TruLink application.
For the most up-to-date information on devices that are supported for use with TruLink, visit www.TruLinkHearing.com
Get Started
Fine Tuning
Auto Path
AUTO PATH
Auto Path establishes recommended first fit settings for the connected devices based on the patient’s audiogram. Functions include Feedback Canceller, Best Fit, Reset Data Log, Voice Language, and Experience Level.
1. Insert hearing devices into the patient’s ears, reduce all sources of noise, then select Begin.
2. Select the desired Experience Level, then select Next.3. Review the Auto Path results screen. Select Restart if Status is
Incomplete for any steps, or select Close to continue.
USER CONTROLS
The User Control Configuration demo box will appear upon first fitting with Inspire X. Select Show Demo for demonstration of user control configuration options, or select Don’t show again and Close. Refer to the User Controls QuickTIP for additional information.
QUICKFIT AND FINE TUNING » Select QuickFit on the left navigation bar to make global fitting adjustments. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
» Select Fine Tuning on the left navigation bar or from the QuickFit screen to make detailed fitting adjustments of individual channels and input levels. Refer to the QuickFit and Fine Tuning QuickTIP for additional information.
Hearing device programming must be completed prior to connecting the hearing devices to the Apple or Android device.
Memories1. Select Memories on left navigation bar or select the
Memories bar in the middle of Fitting screens.
2. Select drop-down arrows to extend the Memories menu, then select the desired memories to program.
3. Select Additional Configuration Options to Copy, Move, or Link memories and adjust the Telephone Release.
Indicators1. Select Indicators on the left navigation bar.
2. Select or de-select check boxes to enable or disable indicators.
3. Select the Individual Indicator names to adjust the volume level and stimulus type for individual indicators, then select Play to play indicator directly through devices or Demo to play indicator through loudspeaker for demonstration purposes.
Additional AdjustmentsRefer to the QuickTIP library for additional information regarding Experience Manager, Frequency Lowering and Noise Control.
Fitting Summary1. Select Fitting Summary on the left navigation bar.
2. Select feature names or details to change status of features if necessary. Feature names are hyperlinks and will navigate to the adjustment screens.
3. Select Print button to generate a one page printed report.
4. Select Save button to save current fitting session.
Pairing to Apple and Android Devices1. After programming is completed, exit Inspire X software.
2. Turn Bluetooth ON on Apple or Android devices.
Refer to TruLink for Apple Devices: Setup or TruLink for Android Devices: Setup for additional information.
MEMORIES
1. Select Memories on left navigation bar or select the Memories bar in the middle of Fitting screens.
2. Select drop-down arrows to extend the Memories menu, then select the desired memories to program.
3. Select Additional Configuration Options to Copy, Move, or Link memories and adjust the Telephone Release.
INDICATORS
1. Select Indicators on the left navigation bar.2. Select or de-select check boxes to enable or disable indicators.3.
Memories
Select the Individual Indicator names to adjust the volume level and stimulus type for individual indicators, then select Play to play indicator directly through devices or Demo to play indicator through loudspeaker for demonstration purposes.
ADDITIONAL ADJUSTMENTS
» Refer to the QuickTIP library for additional information regardingExperience Manager, Frequency Lowering and Noise Control Indicators
Fitting Summary
FITTING SUMMARY
1. Select Fitting Summary on the left navigation bar.2. Select feature names or details to change status of features if
necessary. Feature names are hyperlinks and will navigate to theadjustment screens.
3. Select Print button to generate a one page printed report.4. Select Save button to save current fitting session.
PAIRING TO APPLE AND ANDROID DEVICES
1. After programming is completed, exit Inspire X software.2. Turn Bluetooth ON on Apple or Android devices.
Refer to TruLink for Apple Devices: Setup or TruLink for AndroidDevices: Setup for additional information.
MEMORIES
1. Select Memories on left navigation bar or select the Memories bar in the middle of Fitting screens.
2. Select drop-down arrows to extend the Memories menu, then select the desired memories to program.
3. Select Additional Configuration Options to Copy, Move, or Link memories and adjust the Telephone Release.
INDICATORS
1. Select Indicators on the left navigation bar.2. Select or de-select check boxes to enable or disable indicators.3.
Memories
Select the Individual Indicator names to adjust the volume level and stimulus type for individual indicators, then select Play to play indicator directly through devices or Demo to play indicator through loudspeaker for demonstration purposes.
ADDITIONAL ADJUSTMENTS
» Refer to the QuickTIP library for additional information regardingExperience Manager, Frequency Lowering and Noise Control Indicators
Fitting Summary
FITTING SUMMARY
1. Select Fitting Summary on the left navigation bar.2. Select feature names or details to change status of features if
necessary. Feature names are hyperlinks and will navigate to theadjustment screens.
3. Select Print button to generate a one page printed report.4. Select Save button to save current fitting session.
PAIRING TO APPLE AND ANDROID DEVICES
1. After programming is completed, exit Inspire X software.2. Turn Bluetooth ON on Apple or Android devices.
Refer to TruLink for Apple Devices: Setup or TruLink for AndroidDevices: Setup for additional information.
MEMORIES
1. Select Memories on left navigation bar or select the Memories bar in the middle of Fitting screens.
2. Select drop-down arrows to extend the Memories menu, then select the desired memories to program.
3. Select Additional Configuration Options to Copy, Move, or Link memories and adjust the Telephone Release.
INDICATORS
1. Select Indicators on the left navigation bar.2. Select or de-select check boxes to enable or disable indicators.3.
Memories
Select the Individual Indicator names to adjust the volume level and stimulus type for individual indicators, then select Play to play indicator directly through devices or Demo to play indicator through loudspeaker for demonstration purposes.
ADDITIONAL ADJUSTMENTS
» Refer to the QuickTIP library for additional information regardingExperience Manager, Frequency Lowering and Noise Control Indicators
Fitting Summary
FITTING SUMMARY
1. Select Fitting Summary on the left navigation bar.2. Select feature names or details to change status of features if
necessary. Feature names are hyperlinks and will navigate to theadjustment screens.
3. Select Print button to generate a one page printed report.4. Select Save button to save current fitting session.
PAIRING TO APPLE AND ANDROID DEVICES
1. After programming is completed, exit Inspire X software.2. Turn Bluetooth ON on Apple or Android devices.
Refer to TruLink for Apple Devices: Setup or TruLink for AndroidDevices: Setup for additional information.
A global company headquartered in Eden Prairie, Minnesota, USA.
Starkey Hearing Technologies, William F. Austin House, Bramhall Technology Park, Pepper Road, Hazel Grove, Stockport, SK7 5BX
T: 0800 042 0000 E: [email protected] W: www.starkey.co.uk / uk.starkeypro.com
© 2019 Starkey Laboratories Ltd. Registered in England, No. 2691952. Registered address: The Pinnacle, 170 Midsummer Boulevard, Milton Keynes, Buckinghamshire, MK9 1FE. 323402833
Contacts
www.starkey.co.uk | @Starkey_UK | facebook.com/Starkey Hearing Technologies UK 16.0365
Starkey’sRegional Account
Managers Team.
Customer Relations ManagerMike HughesFreephone: 0800 042 0424Freephone: 1800 992197 (Ireland)
Technical SupportRussell NancollisJames BrigstockFreephone: 0800 042 0425Freephone: 1800 992197 (Ireland)
Sales and Marketing DirectorNeil O. PottingerOffice: 0161 483 2200
Sales ManagerEileen DissingtonMobile: 07855 343 910
Marketing ManagerSuzie BryantFreephone: 0800 042 0000Freephone: 1800 992197 (Ireland)
NorthMargaret BlackMobile: 07894 608 206Email: [email protected]
North CentralTrevor BridgeMobile: 07968 108 768Email: [email protected]
South Central & South WalesKiran SihotaMobile: 07384 216 005Email: [email protected]
London & South EastJulie AdsheadMobile: 07879 553 496Email: [email protected]
South CoastLorraine MorleyMobile: 07894 608 286Email: [email protected]
Southern Ireland
Freephone: 1800 992197Email: [email protected]
www.starkey.co.uk | @Starkey_UK | facebook.com/Starkey Hearing Technologies UK 16.0365
Starkey’sRegional Account
Managers Team.
Customer Relations ManagerMike HughesFreephone: 0800 042 0424Freephone: 1800 992197 (Ireland)
Technical SupportRussell NancollisJames BrigstockFreephone: 0800 042 0425Freephone: 1800 992197 (Ireland)
Sales and Marketing DirectorNeil O. PottingerOffice: 0161 483 2200
Sales ManagerEileen DissingtonMobile: 07855 343 910
Marketing ManagerSuzie BryantFreephone: 0800 042 0000Freephone: 1800 992197 (Ireland)
NorthMargaret BlackMobile: 07894 608 206Email: [email protected]
North CentralTrevor BridgeMobile: 07968 108 768Email: [email protected]
South Central & South WalesKiran SihotaMobile: 07384 216 005Email: [email protected]
London & South EastJulie AdsheadMobile: 07879 553 496Email: [email protected]
South CoastLorraine MorleyMobile: 07894 608 286Email: [email protected]
Southern Ireland
Freephone: 1800 992197Email: [email protected]
Last amended November 2019 — Please check for updates and obtain further copies from uk.starkeypro.com