8/14/2019 Steps Manual - Gl220

1/24

1. PURPOSE:

1.1 To provide procedures on how to operate GL220 midi LOGGER. Reliabilityengineer is responsible to revise it should there be any changes that

its with !hillips Lumillileds re"uirement by re erring to the GL220 midiLOGGER user manual

2. SCOPE:

2.1 The GL220 midi LOGGER in the reliability lab is used or monitoring thetemperature using #$type thermocouple and relative humidity% R& using '$()0 humidity sensor

2.2 GL220 are e"uipped with an internal memory to enable the direct captureo a large volume o data to *+' memory. ,t can be connected to a !- via*+' to enable on$line settings% measurement% and data capture

3. REFERENCE DOCUMENTS:

).1 GL220 midi LOGGER user manual

4. RESPONSIBILITIES:

.1 /// to ensure the GL220 midi LOGGER is in good condition and can beoperate accordingly

5. EQUIPMENT:

(.1 ain unit GL220 midi LOGGER

(.2 #$type thermocouple

(.) '$()0 humidity sensor

6. SAFETY / ENVIRONMENT:

3.1 'e sure to securely connect the GL2204s power cord.

3.2 'e ore turning on the GL220% ensure that the electric soc5et4s powersupply voltage con orms to the GL2204s power rating.

3.) 6void using the GL220 in e7tremely dusty or humid places.

Page 1 of 24

8/14/2019 Steps Manual - Gl220

2/24

7. SETTINGS AND PROCEDURE:

8.1 !TYPE T"ERMOCOUPLE SETTING

8.1.1 -onnecting the #$type thermocouple and range o temperature

8.1.1.1 ,nput connection

8.1.1.2 Temperature range

8.1.2 -onnecting the '$()0 humidity sensor and range o humidity

8.1.2.1 ,nput connection

8.1.) +etting or temperature reading

8/14/2019 Steps Manual - Gl220

3/24

8.1.).1 !ress E9* to enter selection o menu bar

8.1.).2 +elect 6 ! to speci y the input$signal related setting8.1.).) :rom -hannel 1 ; -hannel (< choose =Temperature4 or

I#$%& with T-$# or R'#() . F*+&), and EU are set to O

8.2 '$()0 &* ,>,T? +E9+OR +ETT,9G

8.2.1 -onnecting the '$()0 humidity sensor and range o humidity

8.2.1.1 ,nput connection

8/14/2019 Steps Manual - Gl220

4/24

8.2.1.2 &umidity range

8.2.2 -onnecting the '$()0 humidity sensor and range o humidity

8.2.) +etting or humidity reading

8.2.).1 !ress E9* to enter selection o menu bar

8/14/2019 Steps Manual - Gl220

5/24

8.2.).2 +elect 6 ! to speci y the input$signal related setting8.2.).) 6t -hannel 3< choose =&umidity4 or I#$%& . R'#()- F*+&),

and EU are set to O8.2.). -hannel 8 ; -hannel 10 are set to O or I#$%&

8.) press @*,T to enter a main display

8. >,+!L6? +ETT,9G

8. .1 ?ou should able to see -hannel 1 ; -hannel ( displays atemperature readings and -hannel ( display humidity readings

8. .2 To display the readings in =>igital onitoring4% press >,+!L6? AR,G&T :6+T :ORB6R> button

8/14/2019 Steps Manual - Gl220

6/24

8.( >6T6 -6!T*RE +ETT,9G

8.(.1 +ampling ; enter sampling values8.(.2 :ile name ; select a name o a ile o older which you want to

capture data8.(.) E7ternal sampling ; select to enable or disable or e7ternal

sampling8.(. 6- line ilter ; select to enable or disable i =E7ternalsampling4 is enabled

8.(.( 'ac5up setting ; optional re er user manual8.(.3 +tatistical calculation ; select the calculation method rom the

list

8/14/2019 Steps Manual - Gl220

7/24

8.(.8 !ress @*,T to enter = ain >isplay4

8.(.C !ress +T6RTD+TO! button to capture the data readings

8.(. >ata is auto$stored in internal memory or *+'

8/14/2019 Steps Manual - Gl220

8/24

8.3 +6F,9G >6T6

8.3.1 :ollowing e7plains on how to create a =:older4 to automaticallysaved the captured data

8.3.1.1 On the main menu% press E9*

8.3.1.2 +elect the >6T6 settings and later =:ile 9ame4

8.3.1.) +elect =:older4 and press E9TER 5ey

8/14/2019 Steps Manual - Gl220

9/24

8.3.1. Once the :,LE bo7 appear% ollow the steps belowN %&& #;8*9 and press ENTER %&& #;8 9

8/14/2019 Steps Manual - Gl220

18/24

F. 9ow BP + ),; is a de ault older to store a captured data and pressENTER %&& #;8 9 or O ;8 9

F,. !ress QUIT %&& #;8 9 to enter main display

8/14/2019 Steps Manual - Gl220

19/24

:ollowing e7plains on how to copy captured data rom ='! older4 intopendrive and display it via !-

F,,. 6 ter you capture data via ; START/STOP %&& #; 8'9- insert a

P)# ,*?);8 9 to a GL220

8/14/2019 Steps Manual - Gl220

20/24

F,,,. !ress FILE %&& #;809 and select F*+) O$),'&* #;8 9

,/. Once it prompt a D* O$),'&* #; 8)9 % press RIG"T %&& #;8 9 toenter internal memory% MEM ;8(9

8/14/2019 Steps Manual - Gl220

21/24

/. +elect BP ;8 9 by using DO>N %&& #;8*9

/,. !ress RIG"T %&& #;8 9 to access the *+) 8 )++ < ',,

8/14/2019 Steps Manual - Gl220

22/24

/,,. !ress FAST FOR>ARD %&& #;8 9 and select C $ *+)/ + ),; &' 8 9 andpress ENTER %&& #8+9 two times

/,,,. !ress FAST FOR>ARD %&& #;8 9 and select S)+)0& 0 $ ) &. ) )0%&* #; &' 8=9

/,F. !ress DO>N %&& #;8*9 and select USB1 ;8#9 and press ENTER %&& #;8+9two times

8/14/2019 Steps Manual - Gl220

23/24

/F. 9ow iles are copied into a pendrive

/F,. !ress QUIT %&& #;8 9 to enter main menu/F,,. Remove P)# ,*?);8 9 rom GL220 and insert it to !-

/F,,,. :or -+F ile type% data should be as ollows

8/14/2019 Steps Manual - Gl220

24/24