NATIONAL OILWELL VARCOVARCO BJ HOISTING AND ROTARY TOOLS

– MANUAL AND AIR OP ELEVATORS& ELEVATOR/SPIDERS

– MANUAL DRILL PIPE, DRILL COLLAR& CASING SLIPS

– MANUAL TONGS AND LUG JAWS– MASTER/KELLY BUSHINGS, BOWLS– HINGED CASING SPIDERS– MECHANICAL CATHEADS (FOSTER)– LINK SETS 250/350/500/750/1000 TON– MPR SAFETY CLAMPS– TORQUE AND SPINNING WRENCHES– KELLY SPINNERS– PS-15/16/21/30 POWER SLIPS– ROTARY SUPPORT TABLES– CASING RUNNING TOOL– DRILLING HOOKS– HYDRAULIC POWER SUPPLIES– ST-80 AND ALL SPARES

VARCO SYSTEMS TOP DRIVES & SPARES SHAFFER WELL CONTROL SYSTEMS

– V-SHEAR RAM RUBBERS– SPHERICAL ELEMENTS– RAM BOPS– SHEAR RAMS– MULTI-RAM ASSY– RAM-RUBBER– BOP CONTROL PARTS– VALVE AND CHOKE PARTS

MISSION PRODUCTS LINE

WEATHERFORD (OIL COUNTRY MANUFACTURING)

– WELL SERVICING EQUIPMENT– DRILLING TOOLS– DRILL PIPE, CASING, AND TUBING TONGS– SPIDERS– POWER UNITS

CAVINS OILWELL TOOLS

– WELL SERVICING EQUIPMENT

MASSCO INC.

– RUBBER PRODUCTS– PIPE WIPERS

STOCKING DISTRIBUTOR FOR NATIONAL OILWELL VARCO, MISSION / CDI, WEATHERFORD, CAVINS OILWELL TOOLS

We stock a full range of high quality drilling and wellservicing equipment. We encourage you to visit our websiteand view our product lines. We are committed to providingtimely and accurate quotes, sales, and service every time.

This is a stocking distributor for National Oilwell Varco, Weatherford (WOCM), Cavins Oilwell Tools, and Massco, Inc. We have been a masterstocking distributor for Varco for many years.

NATIONAL OILWELL VARCO

- VARCO BJ OIL TOOLS

1. MANUAL AND AIR ELEVATORS & SPARES- MYT, YT, HYT,YC, MYC, HYC, TMA, TA, MG, RGG, MGG, GG, HGG, SLX,SMX, SJL, SPL, SPRINGS, HINGE PINS, BOLTS

2. ELEVATOR/SPIDERS 250/350/500/750/1000 TON, CASINGRUNNING TOOL (CRT), HINGED CASING SPIDERS (HCS),SLIPS, INSERTS & SPARES

3. MANUAL DRILL PIPE, DRILL COLLAR, CASING SLIPS &SPARES- SD, WOOLEY B, DU, CMS, UC-3, DCS, A, C-1 &ALL INSERTS, DIES, BUTTONS, HANDLES, PINS

4. MANUAL TONGS AND LUG JAWS- HT14, HT35, HT55,HT65, HT100, HT200, DIES, PINS, SPRINGS

5. MASTER/ KELLY/ CASING BUSHINGS/ BOWLS- MPCH,MPSC, HDP, HDS, CB, CUL, ROLLERS, WIPERS, WRENCHES

6. LINKS (BAILS) 250/350/500/750/1000 TON7. TYPE MPR, T & C SAFETY CLAMPS (DOG COLLARS) &

SPARES- LINKS, DIES, SCREWS8. SPINNING WRENCHES- SSW10, SSW30, SSW40 & ALL

SPARES9. ST80 TORQUE WRENCH & ALL SPARES- UPPER DIES,

LOWER DIES, KNURLED ROLLERS10. KELLY SPINNERS- 6600 & 6800 & ALL SPARES11. PS-15/16/21/30 POWER SLIPS12. DRILLING HOOKS & POWER SWIVELS

-VARCO SYSTEMS TOP DRIVES AND SPARES

1. MOTORS2. UPPER & LOWER IBOP3. SAVER SUBS4. WASHPIPE & WASHPIPE SPARES5. SERVICE LOOPS

- SHAFFER WELL CONTROL SYSTEMS & SPARES

1. BOPS- ANNULARS AND RAMS2. SPHERICAL ELEMENTS & REPAIR KITS3. RAMS/ SHEAR RAMS/ MULTI-RAM ASSEMBLIES4. RAM-RUBBER & V-SHEAR RAM RUBBERS5. BOP CONTROL PARTS6. VALVE AND CHOKE PARTS

- M/D TOTCO

1. PRESSURE / DRILLINGMONITORING SYSTEMS2. WEIGHT INDICATORS3. RECORDERS4. TORQUE INDICATORS

- MISSION PRODUCTS

1. DIES, INSERTS & BUTTONS FOR BAASH-ROSS, BJ, CAVINS,ECKEL, BILCO, FARR, FOSTER, GUIBERSON, HILLMAN-

KELLY, KELCO, ORTCO, VARCO, WEATHERFORD AND WOOLEY TOOLS

2. WASHPIPE & WASHPIPE PACKING3. CENTRIFUGAL PUMPS AND PARTS4. FLUID END EXPENDABLES

ACCESS OIL TOOLS

1. MANUAL AND AIR OP ELEVATORS & SPARES- LYT, MYT,YT, HYT, YC, MYC, HYC, MAA, MRA, TA, MG, RG, MGG,GG, HGG, SLX, SJL, SPL, SPRINGS, PINS, BOLTS

2. SPIDERS- TS100, CHD, DUAL SPIDERS BOWLS, SLIPSAND INSERTS

3. HINGED CASING SPIDERS- 200 TON 30”, 20” &13-3/8”,REDUCING BUSHINGS AND SPARES

4. MANUAL DRILL PIPE, DRILL COLLAR & CASING SLIPS- SD, WOOLEY B, DU, CMS, UC-3 DCS, C-1 & ALL INSERTS,

DIES, BUTTONS, HANDLES, PINS5. MANUAL TONGS AND LUG JAWS- C, B, HT65, HT100,

AAX, H, DIES, PINS, SPRINGS6. MANUAL TUBING TONGS- K25, K30, K50, K70, DIES &

SPARES7. TYPE MPR, T & C SAFETY CLAMPS & SPARES8. KELLY SPINNERS- A6C, A6H, B7, B7H

WEATHERFORD

-OIL COUNTRY MANUFACTURING (OCM)

1. MASTER TUBING TONGS- 55000,56800,55700 & 57800,JAWS, DIES & SPARES

2. OPEN HEAD TUBING TONGS- 45000, RS, CTS, JAWS,DIES & SPARES

3. BACKUP TONGS- THREE-JAW AND MS4. CLOSED-HEAD TUBING TONGS- CH58 AND 935. POWER SUCKER ROD TONGS- M-20, M-40, M-50 & M-75

6. WELDLESS ELEVATOR LINKS AND BIG EYE LINKS7. HOOKS- 100 TON TUBING HOOKS & BLOCKS8. TUBING SPIDERS-B, CHD, & E, SLIPS, INSERTS &

SPARES9. SUCKER ROD HOOKS, ELEVATORS, WRENCHES

-CASING EQUIPMENT

1. CASING TONGS- 16-25, 14-50, 24-50 HIGH TORQUE CASINGTONGS, JAWS, DIES & SPARES

2. HYDRAULIC POWER UNITS- ELECTRIC OR DIESELPOWERED, 40 – 100 HP

-ELASTOMERS

1. THREAD PROTECTORS- KLEPO AIR OPERATED,MECH-TEC MANUAL

2. DRILL PIPE PROTECTORS3. STABBING GUIDES4. PIPE WIPERS

CAVINS OIL WELL TOOLS

1. SPIDERS- B, C, CHD, F, G, TS100, SLIPS, INSERTS &SPARES

2. POWER TONGS- RS, MS, BJ, HILLMAN-KELLEY, FOSTER(74-92-R; 58-93R), JAWS, INSERTS & SPARES

3. POWER SUCKER ROD TONGS- MARK II THROUGH VI4. WELDLESS ELEVATOR LINKS- 150 T 36” – 120”5. HOOKS- WEB WILSON HYDRA HOOK 40- 150 TONG6. SUCKER ROD HOOKS, ELEVATORS, WRENCHES7. MANUAL TUBING TONGS- MS, KELCO A20, K-20, K25,

K30, DIES & SPARES8. DEPTHOMETERS9. BOPS- MODELS BP-50A & S-BP-50B10. TYPE T SAFETY CLAMPS & SPARES

MASSCO

1. SPLIT DUAL PIPE WIPERS- 17”- 22”2. FLAT PIPE WIPERS- 9” – 26”