Date post: | 18-Feb-2018 |
Category: |
Documents |
Upload: | riski-suhardinata |
View: | 238 times |
Download: | 1 times |
7/23/2019 Submersible Pump Series
http://slidepdf.com/reader/full/submersible-pump-series 1/10
KAWAMOTO PUMP MFG. CO., LTD.
SUBMERSIBLE PUMPSUMP PUMP SEWAGE PUMP
CONTRACTOR PUMPSEA WATER PUMP
7/23/2019 Submersible Pump Series
http://slidepdf.com/reader/full/submersible-pump-series 2/10
7/23/2019 Submersible Pump Series
http://slidepdf.com/reader/full/submersible-pump-series 3/10
50Hz 3,600min-160Hz
3,000min-150Hz 3,600min
-160Hz
3
3,000min-1
3,000min-150Hz 3,600min
-160Hz
Capacity m3 /min
T o t a l h e a d ( m )
Capacity m3 /min
T o t a l h e a d ( m )
Capacity m3 /min
T o t a l h e a d ( m )
Capacity m3 /min
T o t a l h e a d ( m )
Capacity m3 /min
T o t a l h
e a d ( m )
Capacity m3 /min
T o t a l h
e a d ( m )
7/23/2019 Submersible Pump Series
http://slidepdf.com/reader/full/submersible-pump-series 4/10
The pump is small and light weight with S-shaped non-clog impeller of
high passage performance of foreign objects, and stable operation is
ensured as the pump is free from forming air pocket behind impeller.
Compact size 2-pole motor with wear proof cast iron made frame and
build-in motor protector is adopted. Stainless steel made pedestal sup-
port for cast iron made one is available upon request.(See page 10)
Submersible Sewage Pump : ZU3, ZUJ
Submersible Vortex Sewage Pump : VU4
Because of specially figured casing and impeller and vortex construc-tion, the pump shows high pumping performance and high passage per-
formance of foreign objects.PAT pending) The motor frame is made of
cast iron and is provided with built-in motor protector for up to 7.5k-
W.11kW motor is provided with thermal relay to sense abnormal tem-
perature rising of motor coil.) Stainless steel made pedestal support for
cast iron made one is available upon request.See page 10)
4
The impeller is closed type to obtain high pumping performance and
is made from BC to avoid starting failure from rusting. The strainer is
specially figured to prevent sucking of foreign objects, and the foot
is provided to flange to lessen the load against the pump.(PAT pend-
ing) The motor is with cast iron made frame and built-in motor protec-
tor. Stainless steel made pedestal support for cast iron made one is
available upon request.(See Page 10)
Submersible Sump Pump : SU4
Material
Casing
Impeller
Shaft
FC
FC
SUS403
Impeller Type
Sealing
Motor Type
S-shaped semi-open non-clog
Drysealed, 2-Pole
Double mechanical sealof SiC x SiC & Ceramic
x Carbon
Applicable liquid specifications
Liquid handling
Sand content
Solids handling
Cloth handling
Filthy water with solidsbut not containing
abrassive
Material
Casing
Impeller
Shaft
FC
FC
SUS420J2
Impeller Type
Sealing
Motor Type
Vortex
Drysealed, 4-Pole
Double mechanical sealof SiC x SiC & Ceramicx Carbon
Applicable liquid specifications
Liquid handling
Sand content
Solids handling
Cloth handling
50mm bore : 50mm
65mm bore : 65mm
80mm bore : 80mm
100mm bore : 100mm
Filthy water with solidsbut not containingabrassive
0.4~0.75kW : 35mm
1.5kW : 35mm
2.2~7.5kW : 40mm
0.4~0.75kW : 200 × 200mm
1.5kW : 300 × 300mm
2.2~7.5kW : 300 × 450mm
Material
Casing
Impeller
Shaft
FC
BC
SUS403
Impeller Type
Sealing
Motor Type
Closed
Drysealed, 2-Pole
Double mechanical sealof SiC x SiC & Ceramicx Carbon
Applicable liquid specifications
Liquid handling
Sand content
Solids handling
Cloth handling
Dirty water not contain-ing solids and abras-sive
7/23/2019 Submersible Pump Series
http://slidepdf.com/reader/full/submersible-pump-series 5/10
7/23/2019 Submersible Pump Series
http://slidepdf.com/reader/full/submersible-pump-series 6/10
Material
Casing
Impeller
Shaft
SCS13
SCS13
SUS420J2
Material
Casing
Impeller
Shaft
FC
FC
SUS420J2
Material
CasingImpeller
Shaft
FCFCD450
SUS420J2
Impeller Type
Sealing
Motor Type
Vortex
Drysealed, 4-Pole
Double mechanical sealof SiC x SiC & Ceramicx Carbon
Impeller Type
Sealing
Motor Type
Non-clog
Drysealed, 4-Pole
Double mechanical sealof SiC x SiC & Ceramic x
Carbon
Impeller Type
Sealing
Motor Type
Vortex with cutter
Drysealed, 4-Pole
Double mechanical sealof SiC x SiC & Ceramic xCarbon
Applicable liquid specifications
Liquid handling
Sand content
Solids handling
Cloth handling
50mm bore : 50mm
65mm bore : 65mm
Filthy water with solidsbut not containingabrassive
6
All parts such as pump casing, impeller shaft and discharge section
as well as motor frame are made of stainless steel for rust-proof and
corrosion-proof. Because of specially figured casing and impeller
and vortex construction, the pump shows high pumping perfor-
mance and high passage performance of foreign objects. The
motor is provided with built-in motor protector. Auto connection typeis available in combination use with UJS pedestal support.
Because of closed type non-clog impeller and specially constructed casing,
the pump shows high pumping performance.(PAT pending) The motor
frame is made of cast iron and is provied with built-in motor protector up to
7.5kW. (Above 11kW motor is provided with thermal relay to sense abnormal
temperature rising of motor coil.) Stainless steel made pedestal support for
cast iron made one is available upon request.(See page 10)
Applicable liquid specifications
Liquid handling
Sand content
Solids handling
Cloth handling
50mm bore : 35mm
65mm bore : 35mm
80mm bore : 53mm
100mm bore : 53mm
150mm bore : 53mm
50mm bore : 300 300mm
65mm bore : 300 300mm
80mm bore : 200 300mm
100mm bore : 200 300mm
150mm bore : 200 300mm
Filthy water with solidsbut not containingabrassive
Applicable liquid specifications
Liquid handling
Sand content
Solids handling
Cloth handling
50mm bore : 17mm
65mm bore : 17mm
80mm bore : 24mm
100mm bore : 26mm50mm bore : 300mm
65mm bore : 300mm
80mm bore : 300mm
100mm bore : 300mm
Filthy water with solidsbut not containingabrassive
Submersible Non-clog Sewage Pump : BU4
Superb cutting performance of foreign objects is obtained by combi-nation work of specially figured impeller, casing and ceramic coated
cutter piece, and high passage performance of foreign object is also
obtained by vortex construction. The motor is with cast iron made
frame and built-in motor. Stainless steel made padestal support for
cast iron made one is available upon request.(See page 10)
Stainless Steel Submersible VortexSewage Pump : VUS
Submersible Sewage PumpWith Cutter "CHAMPION" : AU4
7/23/2019 Submersible Pump Series
http://slidepdf.com/reader/full/submersible-pump-series 7/10
7/23/2019 Submersible Pump Series
http://slidepdf.com/reader/full/submersible-pump-series 8/10
7/23/2019 Submersible Pump Series
http://slidepdf.com/reader/full/submersible-pump-series 9/10
Material
Casing
Impeller
Shaft
Urethan Rubber
SUS403
Impeller Type
Sealing
Motor Type
Vortex
Drysealed, 2-pole
Double mechanical sealof SiC x SiC & Ceramicx Carbon
Impeller Type
Sealing
Motor Type
Semi-vortex
Drysealed, 2-pole
Double mechanical sealof SiC x SiC & Ceramicx Carbon
Synthetic Rubber(DU3& DUM)
Material
Casing
Impeller
Shaft
FC
FCD450
SUS403
Applicable liquid specifications
Liquid handling
Sand content
Solids handling
Cloth handling
2%
Civil engineering groundwater not containingabrassive
Applicable liquid specifications
Liquid handling
Sand content
Solids handling
Cloth handling
4%
Civil engineering groundwater not containingabrassive
Synthetic Rubber made casing(DUG is FCD450) and Urethan Rub-
ber made vortex impeller keeps superior pumping performance for
long period of time without wearing. The pump is made small and
light weight with die-cast aluminium frame motor provided with built-
in motor protector.
Submersible Contractor Pump"KAWA MAC" : DU4 & DUM2
Submersible Contractor Pump : DU & DUHThe pump is ruggedly constructed with FCD casing and casing cov-
er with semi-vortex structure of non clogging semi-open type
impeller. The pump can operate even exposed to air for long time.
The motor is provided with built-in motor protector.
50Hz3,000min
-1
3,600min-1
3,600min-1
60Hz
60Hz
Capacity m3 /min
T o t a l h e a d ( m )
30
20
10
00.1 0.2 0.3 0.4 0.5 0.6
Capacity m3 /min
T o t a l h e a d ( m )
30
20
10
00.1 0.2 0.3 0.4 0.5 0.6
T o t a l h e a d ( m )
50Hz is not available
7/23/2019 Submersible Pump Series
http://slidepdf.com/reader/full/submersible-pump-series 10/10
40
50
65
80
UJP-40-5K
UJP-50-5K
UJP-50-7K
UJP-65-7K
UJP-65B-7KUJP-80-7K
0.25~0.75kW
1.5kW
1.5kW
2.2~3.7kW
Bore(mm) Model Note
KAWAMOTO PUMP MFG. CO., LTD.11,Ohsu 4-chome,Naka-ku,Nagoya Japan
TEL +81-52-251-7173 FAX +81-52-241-6151http://www.kawamoto.co.jp
Distributor
Operation
Control method
Ambient temperature
Hummidity
Installation
Box Box
Material & Door
Thickness Plate
Color(Munsell No.)
Protection
Display
Lamp
Outgoing
terminal
Buzzer for warning
1 pump, Single
ON-OFF operation of pump(s) by signal from Float Switch
-10~40
Less than 90%Rh(Without dew drops)
SPCC(1.0t)
SPCC(1.0t)
SPCC(1.06 or 2.3t)
Gray(5Y7/1)
Over current &
Defective Magnetic
Contactor
2 pumps,Alternate/Parallel
SPCC(1.0t)
SPCC(1.0t)
SPCC(1.06 or 2.3t)
Over current,Phase failure,
Reverse phase & Defective
Magnetic Contactor
Indoor, wall mount
2 pumps,Alternate/Parallel
Outdoor,wall mount
SPCC(1.6t)
SPCC(1.6t)
SPCC(1.06 or 2.3t)
Over current,Phase failure,
Reverse phase & Defective
Magnetic Contactor
ECD2 ECD2-P ECDW-P
Power supply
Operation
Trouble
Reverse phase
Abnormal water level
Working pimp
Run
Trouble
Abnormal water level
Applicable model : SU4(2.2kW,3.7kW),ZUJ, AU4,BU4,VU4 and VUS
Applicable model : WUP3, WUO(3)-F & YUK2
Optional specification : With residual current operated circuit breaker and Phase Advance Condenser
10