FW0109
0506
Supersedes
1203
Sump Pumps, Effl uent Pumps,
Sewage Pumps & Utility Pumps
2 MMoving water . . . MMOne customer at a time.MM
Submersible Utility Pump
• 115V thermal overload protected PSC motor, 1.5 amps
• Environmentally friendly, oil-free motor runs cooler and lasts longer
• Thermoplastic body resists corrosion, stress and heat
• Vent hole prevents air lock
• 1” male discharge with garden hose adapter for easy hookup
• Pumps floor dry to 1/8”; fits into 7” opening
• 9’ double-sealed cord standard on UTFAL. For 20’ Cord, order
UTFAL20
• Temperature rating: 120°F (49°C)
• 1-year limited warranty
UTFAL 1/6 HP
Utility Pumps
Model HPDischarge Pipe
Size
Gallons Per Min. Lift Capacity
5 ft. 10 ft. 15 ft.
UTFAL/UTFAL20 1/6 1” 15 11 6
1/4 HP Submersible Utility Pump
Model HPDischargePipe Size
Gallons Per Min. Lift Capacity
5 ft. 10 ft. 15 ft.
2STFAL/2STFAL20
1/4 1-1/4” 30 22 12
2STFAL 1/4 HP
• 115V thermal overload protected PSC motor, 2.5 amps
• Environmentally friendly, oil-free motor runs cooler and lasts longer
• Thermoplastic body resists corrosion, stress and heat
• Vent hole prevents air lock
• 1” male discharge with garden hose adapter for easy hookup
• Pumps floor dry to 1/8”; fits into 7” opening
• 9’ double-sealed cord standard on 2STFAL. For 20’ Cord, order
2STFAL20
• Temperature rating: 120°F (49°C)
• 1-year limited warranty
IL0612
0
5
10
15
20
25
30
35
0 10 20 30
Flow (GPM)
Hea
d (
Ft)
1/6HP
Model UTFAL
IL0613
0
5
10
15
20
25
30
35
0 10 20 30 40
Flow (GPM)
Hea
d (
Ft)
1/4HP
Model 2STFAL
3MMoving water . . . MMOne customer at a time.MM
5STF
1/2 HP Hi-Volume Farm/Contractor Pump
• Moves water fast
• Ideal for rental, farm and contractor applications
• Environmentally friendly motor runs cooler and lasts longer
• 115V thermal overload protected PSC motor, 6.0 amps
• Thermoplastic body resists corrosion, stress and heat.
• Pumps floor dry to 1”, fits in 9” opening
• Vent hole prevents air lock.
• 2” NPT discharge with barb hose adapter - Pumps to 1”
• 9’ double-sealed cord
• Temperature rating: 120°F (49°C)
• 1-year limited warranty
Model HPDischargePipe Size
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft. 20 ft. 30 ft.
5STF 1/2 2” 60 55 45 30 6
Pumps
60 gallons
per
minute!
IL0614
0
5
10
15
20
25
30
35
0 10 20 30 40 50 60 70
Flow (GPM)
Hea
d (
Ft)
1/2HP
Model 5STF
PumpMate® Portable Electric Utility Pump
• Overload protected motor for long life
• Boosts line pressure by as much as 40 PSI for power washing
• Pump water from flooded basements, empty boats, drain stock tanks or water lawns and gardens
• 1/2 HP, 115V
• Cast iron pump housing for long life.
• Includes garden hose adapters, PuddleVac and extra set of brushes
• Use for lawn sprinkling, power washing and water transfer
• Temperature rating: 120°F (49°C)
• 1-year limited warranty
CF511
Model HPDischarge Height
Above Pumping Level 5 ft. 10 ft. 15 ft.
CF511 1/2 Gallons Per Minute 24 23 22
Maximum Case Pressure 100 PSIMaximum Temperature Rating for Dewatering 120°F (49°C)
Model CF511
0
20
40
60
80
100
120
0 5 10 15 20 25 30
Flow - GPM
Tota
l Dyn
amic
Hea
d - F
t.
IL0153
Utility Pumps
4MMoving water . . . MMOne customer at a time.MM
Sump Pumps
• 1/4 HP, 115V PSC motor, 2.2 amps
• Environmentally friendly, oil-free motor runs cooler and lasts longer• Thermoplastic body resists corrosion, stress and heat• Built-in thermal overload protection• Vent relief port prevents air lock• 1-1/4” NPT discharge• 9’ double-sealed cord• 1-year limited warranty
2SPFAL 1/4 HP
Model HPDischargePipe Size
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft.
2SPFAL 1/4 1-1/4” 30 22 12
Submersible Automatic Sump Pumps • Environmentally friendly, oil-free, high efficiency motor runs cooler and lasts longer
• Non-clogging vortex impeller effectively removes lint and debris
• Thermoplastic and stainless steel construction
• Easily adjustable factory tested tethered piggy-back switch fits into 12” diameter pit
• Pump can be operated automatically or manually
• Thermal overload protection keeps motor from overheating
• Waterproof double-sealed cord with grounded plug for easy replacement of pedestal pump in a wet environment.
• 1-1/2” NPT discharge - passes 3/8” solids.
• 100% water tested before shipment for reliable operation
• 1-year limited warranty.3SDPL .3 HP 5SDPL .5 HP
Requires rigid discharge pipe for proper switch installation.
Model HPDischargePipe Size
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft.
3SDPL .3 1-1/2” * 38 30 14
5SDPL .5 1-1/2” * 50 40 30
1/4 HP Submersible Sump Pump
0
5
10
15
20
25
0 10 20 30 40
Flow (GPM)
1/4HP
IL0115
Hea
d (F
t)
Model 2SPFAL
IL0110
Model 3SDPL
FLOW PER MINUTE
TOTA
L D
YN
AM
IC H
EAD
Model 5SDPL
IL0109FLOW PER MINUTE
TOTA
L D
YN
AM
IC H
EAD
5 MMoving water . . . MMOne customer at a time.MM
Cast Iron Sump Pump• 1/4 HP, 115V, 8.2 amps
• Rugged cast iron motor housing for long life
• Carrying handle for convenient pump placement
• 1-1/2” discharge to meet commercial code requirements
• Vortex impeller passes up to 3/8” spherical solids
• Standard tethered float switch provides for automatic operation
• Overload protected oil filled motor
• Not intended for pumping unprocessed household sewage or as a sewage ejector pump
• Temperature Rating - 77°F (25°C)
• 1-year limited warranty2SDL 1/4 HP
Model HPDischargePipe Size
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft.
2SDL 1/4 1-1/2” 32 25 10
Sump Pumps
Streamlined Automatic Submersible Sump Pump• Streamlined design easily fits into pits as small as 10” in diameter.
• Solid, buoyant float material and stainless steel float switch arm ensure long term reliability
• Non-clogging vortex impeller effectively removes lint and debris
• Environmentally friendly, oil-free, high efficiency motor runs cooler and lasts longer
• Thermoplastic and stainless steel construction
• Thermal overload protection keeps motor from overheating.
• Waterproof cord with 3-prong grounded plug for easy replacement of pedestal pump in a wet environment.
• 1-1/2” NPT discharge - passes 3/8” solids.
• 100% water tested before shipment for reliable operation
• Maximum temperature for dewatering - 110°F (43°C)
• 1-year limited warranty.3SPL .3 HP5SPL .5 HP
Model HP
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft.
3SPL .3 38 30 14
5SPL .5 50 40 30
20
15
10
5
6
4
2
0
MET
ERS
FEET
GALLONSLITERS
0 20 40 60 80 100 120
5 10 15 20 25 30 35
FLOW PER MINUTE
Model 2SDL
IL0108
IL0111
Model 3SPL
FLOW PER MINUTE
TOTA
L D
YN
AM
IC H
EAD
IL0112
Model 5SPL
FLOW PER MINUTE
TOTA
L D
YN
AM
IC H
EAD
Requires rigid discharge pipe for proper switch installation.
6 MMoving water . . . MMOne customer at a time.MM
• Premium vertical switch fits into pits as small as 10 inches in diameter
• Cast iron pump housing for long life and quiet operation
• 1-1/2” discharge to meet commercial code requirements
• Thermal overload protection keeps motor from overheating
• Waterproof cord for easy replacement of pedestal sump pump without the need for extension cord in a wet environment
• Heavy duty 115V oil filled motor
• Operates in 130ºF water continuously, 150ºF intermittently
• 1-year limited warranty
5SE 1/2 HP
Model HPDischarge Pipe Size
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft.
5SE 1/2 1-1/2” 50 40 30
Cast Iron Sump Pumps
Cast Iron Contractor Sump/Effluent Pumps
3SEL .3 HP
• Non-clogging vortex impeller passes 1/2” solids
• Corrosion-resistant, powder coated epoxy finish
• .3 HP, 115V, 9.7 amps
• Cast iron switch case, motor and pump housing for long life and quiet operation
• Solid, buoyant float material and stainless steel float switch arm ensure long term reliability
• 1-1/2” NPT discharge to meet commercial code requirements
• Thermal overload protection keeps motor from overheating
• 2-pole, float operated switch
• Maximum temperature for effluent or dewatering - 130°F (54°C)
• 1-year limited warranty.
Model HPDischarge Pipe Size
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft.
3SEL .3 1-1/2” * 43 34 19
MODEL 3SEL
IL0113
IL0622
TOTA
L D
YNAM
IC H
EAD
GALLONS
LITERS
0
2
4
FLOW PER MINUTE
0
10
80
20 30
5
10
15
160
40 60
6
FEET
MET
ERS
20
Model 5SE
50
7 MMoving water . . . MMOne customer at a time.MM
High Capacity Contractor Sump/Effluent Pump• 1/2 HP, 115V, 9.4 amps
• Epoxy coated cast iron construction for long life
• Stainless steel components will not rust or corrode
• Thermal overload protection keeps motor from overheating
• Oil-filled, hermetically sealed high efficiency motor for dependable service
• 1-1/2” NPT discharge - passes 1/2” spherical solids
• 100% water tested before shipment for reliable operation
• Temperature rating: 130ºF (54ºC)
• 1-year limited warrantyF1098 1/2 HP
Sump/Effl uent Pumps
Model HPDischarge Pipe Size
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft. 20 ft.
F1098 1/2 1-1/2” 72 61 45 21
High Head Contractor Sump/Dewatering Pump• 1/2 HP, 115V, 10.7 amps
• Epoxy coated cast iron construction for long life
• Stainless steel components will not rust or corrode
• Thermal overload protection keeps motor from overheating
• Oil-filled, hermetically sealed high efficiency motor for dependable service
• Waterproof cord with grounded plug for easy replacement of pedestal pump in a wet environment
• 1-1/2” NPT discharge - passes 5/8” solids
• 100% water tested before shipment for reliable operation
• Temperature rating: 130ºF (54ºC)
• 1-year limited warrantyF1137 1/2 HP
PUMPS
WATER
480 GPH at
25 FT!
Model HPDischarge Pipe Size
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft. 20 ft. 25 ft.
F1137 1/2 1-1/2” 93 79 64 36 8
MODEL F1098
IL0615
25
20
15
10
5
0
0
6
4
2
8
MET
ERS
FEET
GALLONSLITERS
TOTA
L DY
NAM
IC H
EAD
FLOW PER MINUTE
10 20 30 40 50 60 70 80 90 100
80 160 240 320
25
MODEL F1137
IL0616
8MMoving water . . . MMOne customer at a time.MM
Silent Sentry® 12 Volt Battery Operated Back-Up Sump Pump
Compare Features!
FB12DCC
• Automatic operation for worry-free basement protection
• 10 Amp battery charger with burnout and battery overcharge protection
• Solid state circuitry with regulated self-charger
• Pumps up to 1392 GPH
• 12 volt high efficiency pump
• Automatic 12 volt, DC, solid state control box with complete light, alarm indicators and warning system
• Variable level reliable (Low Voltage) float switch
• Includes all required fittings, check valves & instructions for easy installation
• One year limited warranty
Model
Gallons Per Minute Lift Capacity
5 ft. 10 ft.
FB12DCC 23 15
Battery and primary pump not included (marine deep cycle battery recommended for longer life, but not required).
Emergency Backup Sump Pump
Column Sump Pumps
• Open type non-clogging multi-vane impeller
• Heavy duty motor - 115V, 60 cycle, single phase, 1725 RPM
• Thermal overload protection keeps motor from overheating
• Waterproof cord with grounded plug
• Easily adjustable on/off float and rod type switch
• Top suction strainer filters out debris
• Durable shaft securely fits to impeller
• Operates in 130ºF water continuously; 150ºF intermittently
• Conveniently fits into 12” diameter pit
• 1-year limited warranty
Column Sump Pumps
3CE
3CD
Model HP BaseDischarge Pipe Size
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft.
3CE 1/3 Thermoplastic 1-1/4” 50 36 10
3CD 1/3 Cast Iron 1-1/2” * 50 41 22
Model 3CE
0.00
2.00
4.00
6.00
8.00
10.00
12.00
14.00
16.00
18.00
0 10 20 30 40 50 60Flow - GPM
Hea
d-F
t.
IL0617
Model 3CD
0
5
10
15
20
25
0 10 20 30 40 50 60Flow - GPM
Hea
d-F
t.
IL0618
0
5 10 150
5
10
15
20 40 60
2
4
GALLONSLITERS
METE
RSFE
ET
FLOW PER MINUTE
TOTA
L DY
NAM
IC H
EAD
MODEL FB12DCC
20 25 30
80 100 120
25
35
206
IL0619
9MMoving water . . . MMOne customer at a time.MM
.4 HP Submersible Sewage Ejector Pump
4EPFVertical
Float Switch
• Rugged oil filled .4 HP, 115V, 60 Hz. motor 9.4 amps
• Thermal overload protects against overheating
• Epoxy coated, cast iron design dissipates motor heat to ensure long life
• 2” discharge with 2” solids pumping capacity
• Bottom suction inlet with vortex impeller
• 15’ waterproof power cord with grounded plug
• Ceramic and carbon seal for reliable service and extended life
• Temperature Rating: 130ºF. (54ºC.)
• One year limited warranty
Cast Iron Submersible Sewage Ejector Pump
• Bottom suction inlet with vortex impeller
• 2” NPT discharge with 2” solids pumping capacity
• Double seal for reliable service and extended life
• High efficiency, .4 HP, 115V, 60 Hz motor 5.5 amps
• Environmentally friendly oil-free motor runs cooler and lasts longer
• Thermal overload protects against overheating
• Waterproof power cord with grounded plug
• Temperature Rating: 110°F (43°C)
• One year limited warranty
40ECF .4 HP
Sewage Pumps
Model HP
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft.
4EPF .4 82 53 32
Model HP
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft.
40ECF .4 90 60 23
IL0114FLOW PER MINUTE
0LITERS
GALLONS
0
1208040
2010 30
200160
40 50
TOTA
L DY
NAM
IC H
EAD
10
25
154
MET
ERS
25
6
FEET
MODEL 4EPF
80
280240
60 70
320
90
20
TOTA
L DY
NAM
IC H
EAD
FLOW PER MINUTE
60
LITERS
GALLONS
0
2
4
5
20
0
40
160
10
15
10080
320
MODEL 40ECF
METE
RS
6 20
FEET
IL0623
• Add a bathroom anywhere!
• Install in basements, room additions, garages or workshops.
• System includes tank, pump, seals, hardware, switch, check valve, flange and discharge pipe.
• CSA/CUS Listed sewage pump.
• 2” NPT discharge with 2” solids capacity.
• Complete step-by-step instructions included.
• Waterproof power cord with grounded plug.
• Meets rigid IAPMO standards.
• One year limited warranty.
F1101
No need
to break
concrete!
Replacement pump 1102RP for F1101, 1100-0006 and 1102-0008.
U P C
Model HP
Gallons Per Minute Lift Capacity
5 ft. 10 ft. 15 ft.
F1101 .4 73 39 19
NEW!
Pre-ssembled
design for easy
installation
The original patented PowerFlush Sewage Ejector Add-on Bathroom
System
Flint & Walling, Inc. • 95 North Oak Street • Kendallville, IN 46755 • www.fl intandwalling.com
IL0621
MODEL F1101WITH DISCHARGE PIPE INSTALLED