ISO Update
Supplement to ISO Focus+
October 2010
International Standards in processfrom 25 August to 30 September 2010
Committee Drafts (CD) registered 1
Draft International Standards (DIS) circulated 2
Final draft International Standards (FDIS) circulated 5
Standards published 9
Standards confi rmed 16
Standards withdrawn 16
Meeting calendar 18
People and places
ISO Members 26
ISO Update, Supplement to ISO Focus -- October 2010 1
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Stand-ard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 25 August to 30 September 2010
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 8 Ships and marine technology
ISO/CD 11711-1
Ships and marine technology — Piping and machinery — Ballast water management sys-tems — Part 1: Discharge sampling apparatus
ISO/CD 614 Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing
ISO/CD 1751 Ships and marine technology — Ships'side scuttles
ISO/CD 3434 Shipbuilding and marine structures — Heated glass panes for ships' rectangular windows
ISO/CD 3903 Ships and marine technology — Ships' ordi-nary rectangular windows
ISO/CD 21005 Ships and marine technology — Thermally toughened safety-glass panes for windows and side scuttles
TC 20 Aircraft and space vehicles
ISO/CD 12208 Space systems — Observed Proton Fluences over long duration at GEO and Guideline for selection of confidence level in statistical model of Solar Proton Fluences
TC 22 Road vehicles
ISO/CD 4164 Road vehicles — Mopeds — Engine test code — Net power
TC 23 Tractors and machinery for agriculture and forestry
ISO/CD 5718 Harvesting equipment — Blades for agricultural rotary mowers — Requirements
TC 44 Welding and allied processes
ISO/CD 15614-14
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys
ISO/CD 9455-10
Soft soldering fluxes — Test methods — Part 10: Flux efficacy tests, solder spread method
ISO/CD 9455-16
Soft soldering fluxes — Test methods — Part 16: Flux efficacy tests, wetting balance method
TC 79 Light metals and their alloys
ISO/CD 13092 Titanium and titanium alloys — Titanium sponge
TC 84 Devices for administration of medicinal products and intravascular catheters
ISO/CD 10555-3
Sterile, single-use intravascular catheters — Part 3: Central venous catheters
ISO/CD 10555-4
Sterile, single-use intravascular catheters — Part 4: Balloon dilatation catheters
ISO/CD 10555-5
Sterile, single-use intravascular catheters — Part 5: Over-needle peripheral catheters
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 19238 Radiation protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics
ISO/CD 16117 Nuclear criticality safety — Criticality accident fission numbers estimates
TC 113 Hydrometry
ISO/CD 4377 Hydrometric determinations — Flow measure-ment in open channels using structures — Flat-V weirs
TC 114 Horology
ISO/CD 13074 Analogue quartz clocks — Fitting dimensions of movements to hands
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 16422 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
TC 163 Thermal performance and energy use in the built environment
ISO/CD 13788 Hygrothermal performance of building compo-nents and building elements — Internal surface temperature to avoid critical surface humidity and interstitial condensation — Calculation methods
TC 172 Optics and photonics
ISO/CD TR 21254-4
Lasers and laser-related equipment — Deter-mination of laser-induced damage threshold of optical surfaces — Part 4: Inspection, detec-tion and measurement
TC 193 Natural gas
ISO/CD 13734 Natural gas — Organic components used as odorants — Requirements and test methods
TC 206 Fine ceramics
ISO/CD 23145-2
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 2: Un-tapped density
TC 229 Nanotechnologies
ISO/DTS 80004-5
Nanotechnologies — Vocabulary — Part 5: Nano/bio interface
ISO/DTS 80004-7
Nanotechnologies — Vocabulary — Part 7: Diagnostics and therapeutics for healthcare
JTC 1 Information technology
ISO/IEC 14496-16/CD Amd 1
Information technology — Coding of audio-visual objects — Part 16: Animation Framework eXtension (AFX) — Amendment 1: Efficient representation of 3D meshes with multiple attributes
2 ISO Update, Supplement to ISO Focus -- October 2010
ISO/IEC CD 24800-6
Information technology — JPSearch — Part 6: Reference software
ISO/IEC CD 19788-6
Information technology — Learning, education and training — Metadata for learning resources — Part 6: Availability, distribution, and intel-lectual property elements
ISO/IEC CD 29120-2
Information technology — Machine Readable Test Data for biometric testing and reporting — Part 2: Test Input Data
DIS circulated
Period from 25 August to 30 September 2010
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 8 Ships and marine technology
ISO 28004:2007/DAmd 1
* Security management systems for the supply chain — Guide-lines for the implementation of ISO 28000 — Amendment 1: Medium and small ports
2011-02-02
ISO 28004:2007/DAmd 3
* Security management systems for the supply chain — Guide-lines for the implementation of ISO 28000 — Amendment 3: Additional specific guidance if compliance with ISO 28001 is a management objective
2011-02-02
TC 10 Technical product documentation
ISO/DIS 128-15
* Technical product documenta-tion (TPD) — General principles of presentation — Part 15: Pres-entation of shipbuilding drawings
2011-03-02
ISO/DIS 129-4 * Technical product documenta-tion (TPD) — Indication of di-mensions and tolerances — Part 4: Dimensioning for shipbuilding drawings
2011-03-02
TC 17 Steel
ISO/DIS 13887 Cold-reduced steel sheet of higher yield strength with im-proved formability
2011-03-02
(Revision of ISO 13887:2004)
TC 20 Aircraft and space vehicles
ISO/DIS 11532 * Aircraft ground equipment — Graphical symbols
2011-02-11
ISO/DIS 10502 * Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa — Technical specification
2011-02-03
(Revision of ISO 10502:1992)
ISO/DIS 14721 * Space data and information transfer systems — Open archi-val information system (OAIS) — Reference model
2011-02-14
(Revision of ISO 14721:2003)
ISO/DIS 16363 * Space data and information transfer systems - Audit and certification of trustworthy digital repositories
2011-02-22
ISO/DIS 10789 * Space systems — Programme management — Information and documentation management
2011-02-22
ISO/DIS 26900 Space data and information transfer systems — Orbit data messages
2011-02-22
(Revision of ISO 22644:2006)
TC 22 Road vehicles
ISO/DIS 8820-8
* Road vehicles — Fuse-links — Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V
2011-02-03
ISO/DIS 11452-9.2
* Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 9: Portable transmitters
2010-11-09
ISO/DIS 13207-1
* Road vehicles — LED lamp char-acteristics for bulb compatible failure detection — Part 1: LED lamps used for direction indica-tor and stop lamps
2011-02-03
ISO/DIS 13400-1
* Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 1: Gen-eral information and use case definition
2011-02-14
ISO/DIS 13400-2
* Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 2: Net-work and transport layer require-ments and services
2011-02-14
ISO/DIS 13400-3
* Road vehicles — Diagnostic communication over Inter-net Protocol (DoIP) — Part 3: IEEE802.3 based wired vehicle interface
2011-02-14
ISO/DIS 27145-4
* Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle and test equipment
2011-02-14
(Revision of ISO/PAS 27145-4:2006)
TC 31 Tyres, rims and valves
ISO 4251-2:2005/DAmd 1
* Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings — Amendment 1
2011-02-08
TC 33 Refractories
ISO/DIS 14719 * Chemical analysis of refractory material glass and glazes — De-termination of Fe2+ and Fe3+ by the spectral photometric method with 1-10 phenantroline
2011-01-27
TC 34 Food products
ISO/DIS 11746 * Rice — Determination of biomet-ric characteristics of kernels
2011-01-27
ISO/DIS 8586 * Sensory analysis — General guidance for the selection, train-ing and monitoring of selected and expert assessors
2011-02-22
(Revision of ISO 8586-1:1993, ISO 8586-2:2008)
ISO Update, Supplement to ISO Focus -- October 2010 3
TC 35 Paints and varnishes
ISO/DIS 2812-3
* Paints and varnishes — Deter-mination of resistance to liquids — Part 3: Method using an absorbent medium
2011-02-10
(Revision of ISO 2812-3:2007)
ISO/DIS 9117-4
* Paints and varnishes — Dry-ing tests — Part 4: Test using a mechanical recorder
2011-02-10
ISO/DIS 9117-5
* Paints and varnishes — Dry-ing tests — Part 5: Modified Bandow-Wolff test
2011-02-10
TC 43 Acoustics
ISO 10140-1:2010/DAmd 1
* Acoustics — Laboratory meas-urement of sound insulation of building elements — Part 1: Ap-plication rules for specific prod-ucts — Amendment 1: Guideline for the determination of the sound reduction index of joints filled with fillers and or seals
2011-02-17
TC 44 Welding and allied processes
ISO/DIS 13585.2
* Brazing — Brazer qualification 2010-12-01
TC 45 Rubber and rubber products
ISO/DIS 10619-1.2
* Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature
2010-11-10
(Revision of ISO 1746:1998, ISO 1746:1998/Cor 1:1999)
ISO/DIS 10619-2.2
* Rubber and plastics hoses and tubing — Measurement of flex-ibility and stiffness — Part 2: Bending tests at sub-ambient temperatures
2010-11-17
(Revision of ISO 4672:1997)
ISO/DIS 10619-3.2
* Rubber and plastics hoses and tubing — Measurement of flex-ibility and stiffness — Part 3: Bending tests at high and low temperatures
2010-11-10
ISO/DIS 5794-3
* Rubber compounding ingre-dients — Silica, precipitated, hydrated — Part 3: Evaluation procedures in a mixed solution of styrene-butadiene rubber and butadiene rubber
2011-02-25
ISO/DIS 8332 * Rubber compounding ingredi-ents — Sulfur — Methods of test
2011-01-28
(Revision of ISO 8332:2006)
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/DIS 13085 Petroleum and natural gas indus-tries — Aluminium alloy pipe for use as tubing for wells
2011-03-02
ISO/DIS 27627 Petroleum and natural gas indus-tries — Aluminium alloy drill pipe thread connection gauging
2011-03-02
TC 68 Financial services
ISO/DIS 20022-1
* Financial services — Univer-sal financial industry message scheme — Part 1: Metamodel
2011-01-31
(Revision of ISO 20022-1:2004)
ISO/DIS 20022-2
* Financial services — Univer-sal financial industry message scheme — Part 2: UML profile
2011-01-31
(Revision of ISO 20022-2:2007)
ISO/DIS 20022-3
* Financial services — Univer-sal financial industry message scheme — Part 3: Modelling
2011-01-31
(Revision of ISO/TS 20022-3:2004)
ISO/DIS 20022-4
* Financial services — Univer-sal financial industry message scheme — Part 4: XML Schema generation
2011-01-31
(Revision of ISO/TS 20022-4:2004)
ISO/DIS 20022-5
* Financial services — Univer-sal financial industry message scheme — Part 5: Reverse engineering
2011-01-31
(Revision of ISO/TS 20022-5:2004)
ISO/DIS 20022-7
* Financial services — Univer-sal financial industry message scheme — Part 7: Registration
2011-01-31
ISO/DIS 20022-8
* Financial services — Univer-sal financial industry mes-sage scheme — Part 8: ASN.1 generation
2011-01-31
TC 86 Refrigeration and air-conditioning
ISO/DIS 13971 * Refrigeration systems and heat pumps — Flexible pipe elements, vibration isolators, expansion joints and non-metal-lic tubes — Requirements and classification
2011-02-01
TC 92 Fire safety
ISO 834-1:1999/DAmd 1
Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 1
2011-03-02
TC 102 Iron ore and direct reduced iron
ISO/DIS 3087 * Iron ores — Determination of the moisture content of a lot
2011-02-08
(Revision of ISO 3087:1998)
TC 106 Dentistry
ISO/DIS 6876 * Dentistry — Root canal sealing materials
2011-01-27
(Revision of ISO 6876:2001)
TC 108 Mechanical vibration, shock and condition monitoring
ISO/DIS 21940-14
* Mechanical vibration — Rotor balancing — Part 14: Balance quality requirements of rigid and flexible rotors — Balance errors
2011-02-04
(Revision of ISO 1940-2:1997)
ISO/DIS 21940-23
* Mechanical vibration — Rotor balancing — Part 23: Balancing machines — Enclosures and other protective measures for the measuring station
2011-02-04
(Revision of ISO 7475:2002)
4 ISO Update, Supplement to ISO Focus -- October 2010
TC 111 Round steel link chains, chain slings, components and accessories
ISO/DIS 3076 * Round steel short link chains for general lifting purposes — Me-dium tolerance sling chains for chain slings — Grade 8
2011-02-07
(Revision of ISO 3076:1984)
TC 121 Anaesthetic and respiratory equipment
ISO 10524-3:2005/DAmd 1
* Pressure regulators for use with medical gases — Part 3: Pres-sure regulators integrated with cylinder valves — Amendment 1
2011-02-17
TC 135 Non-destructive testing
ISO/DIS 12707 * Non-destructive testing — Terminology — Terms used in magnetic particle testing
2011-01-26
TC 146 Air quality
ISO/DIS 16000-26
* Indoor air — Part 26: Sampling strategy for carbon dioxide (CO2)
2011-01-27
TC 147 Water quality
ISO/DIS 14380 * Water quality — Determination of the acute toxicity to Thamno-cephalus platyurus (Crustacea, Anostraca)
2011-02-03
TC 159 Ergonomics
ISO 9241-410:2008/DAmd 1
* Ergonomics of human-system interaction — Part 410: Design criteria for physical input devices — Amendment 1
2011-02-24
TC 194 Biological evaluation of medical devices
ISO/DIS 13022 * Medical products containing viable human cells — Application of risk management and require-ments for processing practices
2011-03-02
TC 201 Surface chemical analysis
ISO/DIS 14701 * Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness
2011-02-08
TC 210 Quality management and corresponding general as-pects for medical devices
ISO/IEC DGuide 63
* Guide to the development and inclusion of safety aspects in International Standards for medi-cal devices
2011-01-04
(Revision of ISO/IEC Guide 63:1999)
TC 211 Geographic information/Geomatics
ISO/DIS 19145 * Geographic information — Registry of representations of geographic point location
2011-02-03
TC 215 Health informatics
ISO/DIS 11238 * Health Informatics — Identifica-tion of medicinal products — Data elements and structures for unique identification and exchange of regulated informa-tion on substances
2011-02-24
ISO/DIS 11239 * Health informatics — Identifica-tion of medicinal products — Data elements and structures for unique identification and exchange of regulated informa-tion on pharmaceutical dose forms, units of presentation and routes of administration
2011-02-24
ISO/DIS 11240 * Health informatics — Identifica-tion of medicinal products — Data elements and structures for unique identification and ex-change of units of measurement
2011-02-24
ISO/DIS 11615 * Health informatics — Identifica-tion of medicinal products — Data elements and structures for unique identification and exchange of regulated medicinal product information
2011-02-24
ISO/DIS 11616 * Health informatics — Identifica-tion of medicinal products — Data elements and structures for unique identification and exchange of regulated pharma-ceutical product information
2011-02-24
TC 219 Floor coverings
ISO/DIS 10575.2
* Resilient floor coverings — Specification for rubber sheet floor coverings with backing
2010-11-15
ISO/DIS 10577.2
* Resilient floor coverings — Specification for rubber sheet floor coverings without backing
2010-11-15
TC 229 Nanotechnologies
ISO/DIS 12025 * Nanomaterials — Quantifica-tion of nano-object release from powders by generation of aerosols
2011-03-02
IULTCS International Union of Leather Technologists and Chemists Societies
ISO/DIS 2419 * Leather — Physical and mechan-ical tests — Sample preparation and conditioning
2011-01-27
(Revision of ISO 2419:2006)
ISO/DIS 17076-1
* Leather — Determination of abrasion resistance — Part 1: Taber method
2011-01-27
(Revision of ISO 17076:2006)
ISO/DIS 26082-1
* Leather — Physical and me-chanical test method for the determination of soiling — Part 1: Rubbing (Martindale) method
2011-01-27
(Revision of ISO 26082:2007)
ISO Update, Supplement to ISO Focus -- October 2010 5
FDIS circulated
Period from 25 August to 30 September 2010
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 2 Fasteners
ISO/FDIS 4014 * Hexagon head bolts — Product grades A and B
2010-12-01
(Revision of ISO 4014:1999)
ISO/FDIS 4016 * Hexagon head bolts — Product grade C
2010-12-01
(Revision of ISO 4016:1999)
ISO/FDIS 4017 * Hexagon head screws — Prod-uct grades A and B
2010-12-01
(Revision of ISO 4017:1999)
ISO/FDIS 4018 * Hexagon head screws — Prod-uct grade C
2010-12-01
(Revision of ISO 4018:1999)
ISO/FDIS 7048 * Cross-recessed cheese head screws
2010-12-01
(Revision of ISO 7048:1998)
ISO/FDIS 8676 * Hexagon head screws with met-ric fine pitch thread — Product grades A and B
2010-12-01
(Revision of ISO 8676:1999)
ISO/FDIS 8765 * Hexagon head bolts with metric fine pitch thread — Product grades A and B
2010-12-01
(Revision of ISO 8765:1999)
ISO/FDIS 10510
* Tapping screw and washer as-semblies with plain washers
2010-11-17
(Revision of ISO 10510:1999)
ISO/FDIS 14579
* Hexalobular socket head cap screws
2010-12-01
(Revision of ISO 14579:2001)
ISO/FDIS 14580
* Hexalobular socket cheese head screws
2010-12-01
(Revision of ISO 14580:2001, ISO 14580:2001/Cor 1:2004)
ISO/FDIS 14583
* Hexalobular socket pan head screws
2010-12-01
(Revision of ISO 14583:2001, ISO 14583:2001/Cor 1:2004)
ISO/FDIS 14584
* Hexalobular socket raised coun-tersunk head screws
2010-12-01
(Revision of ISO 14584:2001)
ISO/FDIS 14585
* Hexalobular socket pan head tapping screws
2010-11-17
(Revision of ISO 14585:2001, ISO 14585:2001/Cor 1:2004)
ISO/FDIS 14586
* Hexalobular socket countersunk head tapping screws
2010-11-17
(Revision of ISO 14586:2001)
ISO/FDIS 14587
* Hexalobular socket raised countersunk (oval) head tapping screws
2010-11-17
(Revision of ISO 14587:2001)
ISO/FDIS 15071
* Hexagon bolts with flange — Small series — Product grade A
2010-11-25
(Revision of ISO 15071:1999, ISO 15071:1999/Cor 1:2006)
TC 4 Rolling bearings
ISO/FDIS 5753-2
* Rolling bearings — Internal clearance — Part 2: Axial internal clearance for four-point-contact ball bearings
2010-11-09
TC 6 Paper, board and pulps
ISO/FDIS 12625-8
* Tissue paper and tissue prod-ucts — Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
2010-11-17
(Revision of ISO 12625-8:2006)
TC 17 Steel
ISO/FDIS 15510
* Stainless steels — Chemical composition
2010-10-28
(Revision of ISO/TS 15510:2003)
ISO/FDIS 10893-1
* Non-destructive testing of steel tubes — Part 1: Automated elec-tromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktight-ness instead of the hydrostatic test
2010-11-10
(Revision of ISO 9302:1994)
ISO/FDIS 10893-2
* Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
2010-11-10
(Revision of ISO 9304:1989)
ISO/FDIS 10893-3
* Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage test-ing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and transverse imperfections
2010-11-10
(Revision of ISO 9402:1989, ISO 9598:1989)
ISO/FDIS 10893-4
* Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detec-tion of surface imperfections
2010-11-10
(Revision of ISO 12095:1994)
ISO/FDIS 10893-5
* Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
2010-11-10
(Revision of ISO 13664:1997, ISO 13665:1997)
ISO/FDIS 10893-6
* Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detec-tion of imperfections
2010-11-10
(Revision of ISO 12096:1996)
ISO/FDIS 10893-7
* Non-destructive testing of steel tubes — Part 7: Digital radio-graphic testing of the weld seam of welded steel tubes for the detection of imperfections
2010-11-10
ISO/FDIS 10893-8
* Non-destructive testing of steel tubes — Part 8: Automated ultra-sonic testing of seamless and welded steel tubes for the detec-tion of laminar imperfections
2010-11-10
6 ISO Update, Supplement to ISO Focus -- October 2010
(Revision of ISO 10124:1994, ISO 11496:1993, ISO 13663:1995)
ISO/FDIS 10893-9
* Non-destructive testing of steel tubes — Part 9: Automated ultra-sonic testing for the detection of laminar imperfections in strips/plates used for the manufacture of welded steel tubes
2010-11-10
(Revision of ISO 12094:1994)
ISO/FDIS 10893-10
* Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic test-ing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and transverse imperfections
2010-11-10
(Revision of ISO 9303:1989, ISO 9305:1989)
ISO/FDIS 10893-11
* Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and transverse imperfections
2010-11-10
(Revision of ISO 9764:1989, ISO 9765:1990)
ISO/FDIS 10893-12
* Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
2010-11-10
(Revision of ISO 10543:1993)
TC 21 Equipment for fire protec-tion and fire fighting
ISO/FDIS 7240-3
* Fire detection and alarm systems — Part 3: Audible alarm devices
2010-11-15
ISO/FDIS 12239
* Smoke alarms using scat-tered light, transmitted light or ionization
2010-11-16
(Revision of ISO 12239:2003)
TC 22 Road vehicles
ISO/FDIS 7116 * Mopeds — Measurement method for determining maxi-mum speed
2010-11-29
(Revision of ISO 7116:1995)
TC 23 Tractors and machinery for agriculture and forestry
ISO/FDIS 4254-11
* Agricultural machinery — Safety — Part 11: Pick-up balers
2010-11-17
TC 27 Solid mineral fuels
ISO/FDIS 23873
* Hard coal — Method for the measurement of the swelling of hard coal using a dilatometer
2010-10-26
TC 28 Petroleum products and lubricants
ISO/FDIS 3405 * Petroleum products — Determi-nation of distillation characteris-tics at atmospheric pressure
2010-12-01
(Revision of ISO 3405:2000)
ISO/FDIS 16591
* Petroleum products — Determi-nation of sulfur content — Oxi-dative microcoulometry method
2010-11-10
ISO/FDIS 20783-1
* Petroleum and related products — Determination of emulsion stability of fire-resistant fluids — Part 1: Fluids in category HFAE
2010-12-10
(Revision of ISO 20783-1:2003)
ISO/FDIS 20843
* Petroleum and related products — Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
2010-12-03
(Revision of ISO 20843:2003)
TC 44 Welding and allied processes
ISO/FDIS 18274
* Welding consumables — Wire and strip electrodes, wires and rods for fusion weld-ing of nickel and nickel alloys — Classification
2010-11-17
(Revision of ISO 18274:2004, ISO 18274:2004/Cor 1:2005, ISO 18274:2004/Cor 2:2006)
ISO/FDIS 11666.2
* Non-destructive testing of welds — Ultrasonic testing of welded joints — Acceptance levels
2010-11-17
ISO/FDIS 17640.2
* Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
2010-10-27
(Revision of ISO 17640:2005)
TC 45 Rubber and rubber products
ISO/FDIS 32100
* Rubber- or plastics-coated fabrics — Physical and mechani-cal tests — Determination of flex resistance by the flexometer method
2010-11-10
TC 46 Information and documentation
ISO/FDIS 26324
* Information and documentation — Digital object identifier system
2010-11-16
ISO/FDIS 16175-1
* Information and documenta-tion — Principles and func-tional requirements for records in electronic office environments — Part 1: Overview and statement of principles
2010-11-16
ISO/FDIS 16175-3
* Information and documenta-tion — Principles and func-tional requirements for records in electronic office environments — Part 3: Guidelines and functional requirements for records in busi-ness systems
2010-11-16
TC 58 Gas cylinders
ISO/FDIS 11114-3
* Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
2010-11-17
(Revision of ISO 11114-3:1997)
TC 61 Plastics
ISO/FDIS 178 * Plastics — Determination of flexural properties
2010-11-17
(Revision of ISO 178:2001, ISO 178:2001/Amd 1:2004)
ISO/FDIS 11337
* Plastics — Polyamides — De-termination of e-caprolactam and w-laurolactam by gas chromatography
2010-11-10
(Revision of ISO 11337:2004)
ISO/FDIS 4611 * Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
2010-11-17
(Revision of ISO 4611:2008)
ISO Update, Supplement to ISO Focus -- October 2010 7
ISO/FDIS 15064
* Plastics — Aromatic isocy-anates for use in the production of polyurethanes — Determi-nation of the isomer ratio in toluenediisocyanate
2010-11-17
(Revision of ISO 15064:2004)
ISO/FDIS 3343 * Reinforcement yarns — Determi-nation of twist balance index
2010-11-29
(Revision of ISO 3343:1984)
ISO/FDIS 4602 * Reinforcements — Woven fab-rics — Determination of number of yarns per unit length of warp and weft
2010-11-29
(Revision of ISO 4602:1997)
ISO/FDIS 10352
* Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
2010-11-10
(Revision of ISO 10352:1997)
ISO 14125:1998/FDAmd 1
* Fibre-reinforced plastic compos-ites — Determination of flexural properties — Amendment 1
2010-12-01
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/FDIS 28460
* Petroleum and natural gas indus-tries — Installation and equip-ment for liquefied natural gas — Ship-to-shore interface and port operations
2010-11-10
ISO/FDIS 13628-4
* Petroleum and natural gas indus-tries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
2010-11-17
(Revision of ISO 13628-4:1999)
ISO/FDIS 11960
* Petroleum and natural gas indus-tries — Steel pipes for use as casing or tubing for wells
2010-11-17
(Revision of ISO 11960:2004, ISO 11960:2004/Cor 1:2006)
ISO/FDIS 13678
* Petroleum and natural gas indus-tries — Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
2010-11-14
(Revision of ISO 13678:2009)
ISO/FDIS 19906
* Petroleum and natural gas indus-tries — Arctic offshore structures
2010-11-17
TC 92 Fire safety
ISO/FDIS 29473
* Fire tests — Uncertainty of measurements in fire tests
2010-11-08
TC 106 Dentistry
ISO/FDIS 27020
* Dentistry — Brackets and tubes for use in orthodontics
2010-11-17
TC 107 Metallic and other inorgan-ic coatings
ISO/FDIS 3613 * Metallic and other inorganic coatings — Chromate conver-sion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
2010-11-03
(Revision of ISO 3613:2000)
ISO/FDIS 4534 * Vitreous and porcelain enam-els — Determination of fluidity behaviour — Fusion flow test
2010-11-17
(Revision of ISO 4534:1980)
ISO/FDIS 12690
* Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities
2010-11-17
ISO/FDIS 14921
* Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components
2010-11-10
(Revision of ISO 14921:2001)
ISO/FDIS 9717 * Metallic and other inorganic coatings — Phosphate conver-sion coating of metals
2010-11-17
(Revision of ISO 9717:1990)
TC 110 Industrial trucks
ISO/FDIS 22915-14
* Industrial trucks — Verification of stability — Part 14: Rough-terrain variable-reach trucks
2010-11-16
(Revision of ISO 8379:1998, ISO 8379:1998/Amd 1:2001)
TC 117 Fans
ISO/FDIS 12759
* Fans — Efficiency classification for fans
2010-11-16
ISO 13347-1:2004/FDAmd 1
* Industrial fans — Determination of fan sound power levels under standardized laboratory condi-tions — Part 1: General overview — Amendment 1
2010-10-28
ISO 13347-3:2004/FDAmd 1
* Industrial fans — Determina-tion of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods — Amend-ment 1
2010-10-28
TC 118 Compressors and pneu-matic tools, machines and equipment
ISO/FDIS 28927-4
* Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straight grinders
2010-11-17
(Revision of ISO 8662-4:1994)
TC 119 Powder metallurgy
ISO/FDIS 3927 * Metallic powders, excluding powders for hardmetals — De-termination of compressibility in uniaxial compression
2010-12-10
(Revision of ISO 3927:2001, ISO 3927:2001/Cor 1:2008)
ISO/FDIS 3953 * Metallic powders — Determina-tion of tap density
2010-12-01
(Revision of ISO 3953:1993)
TC 122 Packaging
ISO/FDIS 22742
* Packaging — Linear bar code and two-dimensional symbols for product packaging
2010-10-27
(Revision of ISO 22742:2005)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/FDIS 14531-3
* Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the convey-ance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
2010-11-08
(Revision of ISO 14531-3:2006)
8 ISO Update, Supplement to ISO Focus -- October 2010
TC 145 Graphical symbols
ISO 7010:2003/FDAmd 71
* Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 71: Safety sign P025: Do not use this incomplete scaffold
2010-11-03
ISO 7010:2003/FDAmd 72
* Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 72: Safety sign P026: Do not use this device in a bathtub, shower or water-filled reservoir
2010-11-03
ISO 7010:2003/FDAmd 73
* Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 73: Safety sign P027: Do not use this lift for people
2010-11-03
ISO 7010:2003/FDAmd 74
* Graphical symbols — Safety col-ours and safety signs — Safety signs used in workplaces and public areas — Amendment 74: Safety sign P028: Do not wear gloves
2010-11-03
TC 146 Air quality
ISO/FDIS 11771
* Air quality — Determination of time-averaged mass emissions and emission factors — General approach
2010-10-27
TC 147 Water quality
ISO/FDIS 9698 * Water quality — Determination of tritium activity concentration — Liquid scintillation counting method
2010-11-17
(Revision of ISO 9698:1989)
TC 157 Non-systemic contra-ceptives and STI barrier prophylactics
ISO/FDIS 29941
* Condoms — Determination of nitrosamines migrating from natural rubber latex condoms
2010-11-04
TC 159 Ergonomics
ISO/FDIS 24501
* Ergonomics — Accessible design — Sound pressure levels of auditory signals for consumer products
2010-11-17
ISO/FDIS 24502
* Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light
2010-11-17
TC 160 Glass in building
ISO/FDIS 28278-2
* Glass in building — Glass prod-ucts for structural sealant glazing — Part 2: Assembly rules
2010-11-17
TC 172 Optics and photonics
ISO/FDIS 8624 * Ophthalmic optics — Spectacle frames — Measuring system and terminology
2010-12-01
(Revision of ISO 8624:2002)
TC 194 Biological evaluation of medical devices
ISO/FDIS 14155
* Clinical investigation of medical devices for human subjects — Good clinical practice
2010-11-10
(Revision of ISO 14155-1:2003, ISO 14155-2:2003)
TC 204 Intelligent transport systems
ISO/FDIS 17573
* Electronic fee collection — Sys-tems architecture for vehicle-related tolling
2010-11-17
(Revision of ISO/TS 17573:2003)
ISO/FDIS 21216
* Intelligent transport systems — Wireless communications — CALM using millimetre commu-nications — Air interface
2010-10-27
TC 207 Environmental management
ISO/FDIS 14005
* Environmental management systems — Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation
2010-10-27
TC 210 Quality management and corresponding general as-pects for medical devices
ISO/FDIS 80369-1
* Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements
2010-11-17
TC 211 Geographic information/Geomatics
ISO/FDIS 19142
* Geographic information — Web Feature Service
2010-11-17
TC 215 Health informatics
ISO/FDIS 21667
* Health informatics — Health indi-cators conceptual framework
2010-11-03
(Revision of ISO/TS 21667:2004)
TC 216 Footwear
ISO/FDIS 10717
* Footwear — Test method for slide fasteners — Burst strength
2010-10-27
ISO/FDIS 10748
* Footwear — Test method for slide fasteners — Slider locking strength
2010-12-01
TC 229 Nanotechnologies
ISO/FDIS 10801
* Nanotechnologies — Genera-tion of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
2010-11-17
ISO/FDIS 10808
* Nanotechnologies — Charac-terization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
2010-11-10
CASCO Committee on conformity assessment
ISO/IEC FDIS 17021
* Conformity assessment — Re-quirements for bodies providing audit and certification of man-agement systems
2010-11-17
(Revision of ISO/IEC 17021:2006, ISO/IEC DIS 17021-2)
JTC 1 Information technology
ISO/IEC FDISP 29110-2
* Software engineering — Lifecy-cle profiles for Very Small Entities (VSEs) — Part 2: Framework and taxonomy
2010-11-07
ISO/IEC FDISP 29110-4-1
* Software engineering — Lifecy-cle profiles for Very Small Entities (VSEs) — Part 4-1: Profile speci-fications: Generic profile group
2010-11-07
ISO Update, Supplement to ISO Focus -- October 2010 9
ISO/IEC FDIS 24787
* Information technology — Iden-tification cards — On-card biometric comparison
2010-11-16
ISO/IEC FDIS 9796-2
* Information technology — Se-curity techniques — Digital signature schemes giving mes-sage recovery — Part 2: Integer factorization based mechanisms
2010-11-11
(Revision of ISO/IEC 9796-2:2002, ISO/IEC 9796-2:2002/Amd 1:2008)
ISO/IEC FDIS 27033-3
* Information technology — Se-curity techniques — Network security — Part 3: Reference networking scenarios — Threats, design techniques and control issues
2010-11-11
ISO/IEC 14496-22:2009/FDIS Amd 1
* Information technology — Cod-ing of audio-visual objects — Part 22: Open Font Format — Amendment 1: Support for many-to-one range mappings
2010-11-16
ISO/IEC FDIS 23006-4
* Information technology — MPEG extensible middleware (MXM) — Part 4: MXM protocols
2010-11-04
(Revision of ISO/IEC 29116-1:2008)
ISO/IEC FDIS 24800-4
* Information technology — JP-Search — Part 4: File format for metadata embedded in image data (JPEG and JPEG 2000)
2010-11-04
ISO/IEC FDIS 24709-3
* Information technology — Conformance testing for the biometric application program-ming interface (BioAPI) — Part 3: Test assertions for BioAPI frameworks
2010-10-26
Standards published
New International Standards published between 25 August and 30 September 2010
* Available in English only
** French version of standard previously published in English only
Price group
TC 2 Fasteners
ISO 225:2010 * Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
U
ISO 12474:2010
Hexagon socket head cap screws with metric fine pitch thread
D
TC 6 Paper, board and pulps
ISO 16532-3:2010
Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and grease-proof papers
D
TC 8 Ships and marine technology
ISO/PAS 28002:2010
* Security management systems for the supply chain - Development of resil-ience in the supply chain - Require-ments with guidance for use
U
TC 10 Technical product documentation
ISO 11005:2010
* Technical product documentation — Use of main documents
D
TC 17 Steel
ISO 9444-2:2009
Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and sheet/plate
D
ISO 10332:2010
Non-destructive testing of steel tubes — Automated ultrasonic test-ing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
D
TC 20 Aircraft and space vehicles
ISO 12273:2010
Aerospace — Nuts, anchor, self-lock-ing, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient tempera-ture)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees C — Dimensions
B
ISO 12573:2010
* Aircraft — Tubing tolerances — Inch series
E
ISO 10537:2010
* Space data and information transfer systems — Encapsulation service
N
ISO 13526:2010
* Space data and information transfer systems — Tracking data message
W
ISO 13527:2010
* Space data and information transfer systems — XML formatted data unit (XFDU) structure and construction rules
V
ISO 13537:2010
* Space data and information transfer systems — Reference architecture for space data systems
XB
ISO 13541:2010
* Space data and information transfer systems — Attitude data messages
U
ISO 15893:2010
* Space data and information transfer systems — Space communications protocol specification (SCPS) — Trans-port protocol (SCPS-TP)
XA
ISO 22647:2010
* Space data and information transfer systems — Space link identifiers
L
ISO 24917:2010
* Space systems — General test require-ments for launch vehicles
Q
ISO 26872:2010
* Space systems — Disposal of satellites operating at geosynchronous altitude
U
TC 22 Road vehicles
ISO 11452-11:2010
* Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromag-netic energy — Part 11: Reverberation chamber
L
ISO 8721:2010 * Road vehicles — Measurement techniques in impact tests — Optical instrumentation
T
TC 23 Tractors and machinery for agri-culture and forestry
ISO 26322-2:2010
Tractors for agriculture and forestry — Safety — Part 2: Narrow-track and small tractors
C
ISO 11839:2010
Machinery for forestry — Glazing and panel materials used in operator en-closures for protection against thrown sawteeth — Test method and perfor-mance criteria
C
10 ISO Update, Supplement to ISO Focus -- October 2010
TC 27 Solid mineral fuels
ISO 29541:2010
* Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen content — Instrumental method
E
TC 34 Food products
ISO 26642:2010
Food products — Determination of the glycaemic index (GI) and recommenda-tion for food classification
J
ISO 3632-2:2010
* Spices — Saffron (Crocus sativus L.) — Part 2: Test methods
R
ISO 13720:2010
Meat and meat products — Enumera-tion of presumptive Pseudomonas spp.
D
ISO/TS 23647:2010
Vegetable fats and oils — Deter-mination of wax content by gas chromatography
H
TC 38 Textiles
ISO 12952-1:2010
Textiles — Assessment of the ignitabil-ity of bedding items — Part 1: Ignition source: smouldering cigarette
F
ISO 12952-2:2010
Textiles — Assessment of the ignitabil-ity of bedding items — Part 2: Ignition source: match-flame equivalent
F
TC 43 Acoustics
ISO 3741:2010 * Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms
V
ISO 3743-1:2010
* Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pres-sure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room
R
ISO 3744:2010 * Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essen-tially free field over a reflecting plane
W
ISO 11201:2010
Acoustics — Noise emitted by machin-ery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
Q
ISO 11202:2010
Acoustics — Noise emitted by machin-ery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate envi-ronmental corrections
S
ISO 11204:2010
Acoustics — Noise emitted by machin-ery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environ-mental corrections
R
TC 44 Welding and allied processes
ISO 14171:2010
Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification
K
ISO 24034:2010
Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys — Classification
F
TC 45 Rubber and rubber products
ISO 6472:2010 Rubber compounding ingredients — Symbols and abbreviated terms
J
ISO 18752:2006/Amd 1:2010
* Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pres-sure types for hydraulic applications — Specification — Amendment 1
XZ
ISO 34-1:2010 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
G
ISO 48:2010 Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
L
ISO 4647:2010 Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test
G
ISO 4649:2010 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
K
ISO 4666-1:2010
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 1: Basic principles
E
ISO 4666-3:2010
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)
H
ISO 7619-1:2010
Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)
E
ISO 7619-2:2010
Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 2: IRHD pocket meter method
C
TC 58 Gas cylinders
ISO 13341:2010
Gas cylinders — Fitting of valves to gas cylinders
D
TC 59 Buildings and civil engineering works
ISO 8394-1:2010
Building construction — Jointing products — Part 1: Determination of extrudability of sealants
C
ISO 8394-2:2010
Building construction — Jointing prod-ucts — Part 2: Determination of extrud-ability of sealants using standardized apparatus
D
TC 60 Gears
ISO/TR 10064-6:2009
Code of inspection practice — Part 6: Bevel gear measurement methods
R
TC 61 Plastics
ISO 27547-1:2010
* Plastics — Preparation of test speci-mens of thermoplastic materials using mouldless technologies — Part 1: General principles, and laser sintering of test specimens
F
ISO 15527:2010
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
E
ISO 18280:2010
* Plastics — Epoxy resins — Test methods
E
ISO 2558:2010 * Textile glass chopped-strand mats for reinforcement of plastics — Determina-tion of time of dissolution of the binder in styrene
B
ISO Update, Supplement to ISO Focus -- October 2010 11
TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries
ISO 21457:2010
* Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems
R
ISO 21809-5:2010
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
N
ISO 13680:2010
* Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions
X
TC 69 Applications of statistical methods
ISO 11462-2:2010
Guidelines for implementation of sta-tistical process control (SPC) — Part 2: Catalogue of tools and techniques
F
ISO/TS 28037:2010
* Determination and use of straight-line calibration functions
V
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 1920-10:2010
* Testing of concrete — Part 10: Deter-mination of static modulus of elasticity in compression
D
TC 76 Transfusion, infusion and injec-tion equipment for medical and pharmaceutical use
ISO 8536-4:2010
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
J
ISO 9187-1:2010
Injection equipment for medical use — Part 1: Ampoules for injectables
E
ISO 9187-2:2010
Injection equipment for medical use — Part 2: One-point-cut (OPC) ampoules
B
TC 79 Light metals and their alloys
ISO 6719:2010 Anodizing of aluminium and its alloys — Measurement of reflectance char-acteristics of aluminium surfaces using integrating-sphere instruments
E
TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection
ISO 8769:2010 Reference sources — Calibration of surface contamination monitors — Alpha-, beta- and photon emitters
F
ISO 28218:2010
* Radiation protection — Performance criteria for radiobioassay
S
ISO 10276:2010
Nuclear energy — Fuel technology — Trunnions for packages used to transport radioactive material
K
ISO 26062:2010
Nuclear technology — Nuclear fuels — Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry
L
TC 92 Fire safety
ISO 12863:2010
* Standard test method for assessing the ignition propensity of cigarettes
K
TC 104 Freight containers
ISO 17712:2010
Freight containers — Mechanical seals P
TC 106 Dentistry
ISO 10873:2010
Dentistry — Denture adhesives H
ISO 11609:2010
Dentistry — Dentifrices — Require-ments, test methods and marking
K
TC 107 Metallic and other inorganic coatings
ISO 28706-5:2010
* Vitreous and porcelain enamels — De-termination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed systems
F
ISO 28721-4:2010
* Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
C
TC 108 Mechanical vibration, shock and condition monitoring
ISO 18437-2:2005/Amd 1:2010
* Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method — Amendment 1
XZ
ISO 18437-3:2005/Amd 1:2010
* Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method — Amendment 1
XZ
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 11148-3:2010
Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers
N
ISO 11148-4:2010
Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools
N
ISO 11148-6:2010
Hand-held non-electric power tools — Safety requirements — Part 6: Assem-bly power tools for threaded fasteners
P
TC 119 Powder metallurgy
ISO 28279:2010
* Sintered metal materials — Determi-nation of the level of cleanliness of powder-metallurgy parts
B
TC 121 Anaesthetic and respiratory equipment
ISO 8835-3:2007/Amd 1:2010
Inhalational anaesthesia systems — Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems — Amendment 1
XZ
TC 127 Earth-moving machinery
ISO 21507:2010
Earth-moving machinery — Perfor-mance requirements for non-metallic fuel tanks
C
ISO 22448:2010
Earth-moving machinery — Anti-theft systems — Classification and performance
C
TC 131 Fluid power systems
ISO 19879:2010
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
K
12 ISO Update, Supplement to ISO Focus -- October 2010
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 13268:2010
Thermoplastics piping systems for non-pressure underground drain-age and sewerage — Thermoplastics shafts or risers for inspection cham-bers and manholes — Determination of ring stiffness
E
ISO 13956:2010
* Plastics pipes and fittings — Decohe-sion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
E
ISO 19899:2010
* Plastics piping systems — Polyolefin pipes and mechanical fitting assem-blies — Test method for the resistance to end load (AREL test)
D
TC 145 Graphical symbols
ISO 7010:2003/Amd 6:2010
Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 6
XZ
TC 146 Air quality
ISO 30011:2010
Workplace air — Determination of metals and metalloids in airborne par-ticulate matter by inductively coupled plasma mass spectrometry
Q
TC 147 Water quality
ISO 11349:2010
Water quality — Determination of low-volatility lipophilic substances — Gravimetric method
D
TC 159 Ergonomics
ISO 24500:2010
Ergonomics — Accessible design — Auditory signals for consumer products
D
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO 23552-1:2007/Amd 1:2010
* Safety and control devices for gas and/or oil burners and gas and/or oil ap-pliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type — Amendment 1: Addition to the specific regional requirements in Japan
XZ
TC 172 Optics and photonics
ISO 10110-8:2010
Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture; roughness and waviness
K
ISO 11382:2010
Optics and photonics — Optical materials and components — Charac-terization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm
F
ISO 14729:2001/Amd 1:2010
Ophthalmic optics — Contact lens care products — Microbiological require-ments and test methods for products and regimens for hygienic manage-ment of contact lenses — Amendment 1
XZ
TC 173 Assistive products for persons with disability
IEC 60601-2-52:2009/Cor 1:2010
* Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds — Technical Corrigen-dum 1
free
TC 178 Lifts, escalators and moving walks
ISO/TS 22559-2:2010
* Safety requirements for lifts (elevators) — Part 2: Safety parameters meeting the global essential safety require-ments (GESRs)
Q
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 11790:2010
* Copper, lead, zinc and nickel concen-trates — Guidelines for the inspection of mechanical sampling systems
K
ISO 11794:2010
* Copper, lead, zinc and nickel concen-trates — Sampling of slurries
S
TC 184 Automation systems and integration
ISO 14649-111:2010
* Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 111: Tools for milling machines
L
ISO/TS 10303-439:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 439: AP239 product life cycle support
free
ISO/TS 10303-1001:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1001: Appearance assignment
free
ISO/TS 10303-1003:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1003: Curve appearance
free
ISO/TS 10303-1004:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1004: Elemental geometric shape
free
ISO/TS 10303-1005:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1005: Elemental topology
free
ISO/TS 10303-1006:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1006: Foundation representation
free
ISO/TS 10303-1007:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1007: General surface appearance
ZC
ISO/TS 10303-1009:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1009: Shape appearance layers
free
ISO/TS 10303-1016:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1016: Product categorization
free
ISO/TS 10303-1027:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1027: Contextual shape positioning
free
ISO/TS 10303-1032:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1032: Shape property assignment
free
ISO/TS 10303-1047:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1047: Activity
free
ISO Update, Supplement to ISO Focus -- October 2010 13
ISO/TS 10303-1050:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1050: Dimension tolerance
free
ISO/TS 10303-1051:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1051: Geometric tolerance
free
ISO/TS 10303-1068:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1068: Constructive solid geometry 3D
free
ISO/TS 10303-1115:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1115: Part collection
free
ISO/TS 10303-1132:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1132: Associative text
free
ISO/TS 10303-1141:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1141: Requirement view definition
free
ISO/TS 10303-1164:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1164: Product as individual
free
ISO/TS 10303-1289:2010
* Industrial automation systems and integration — Product data rep-resentation and exchange — Part 1289: AP239 management resource information
free
ISO/TS 10303-1292:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1292: AP239 product definition information
free
ISO/TS 10303-1293:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1293: AP239 part definition information
free
ISO/TS 10303-1309:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1309: Draw-ing definition
free
ISO/TS 10303-1310:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1310: Draughting element
free
ISO/TS 10303-1312:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1312: Draughting element specialisations
free
ISO/TS 10303-1323:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1323: Basic geometric topology
free
ISO/TS 10303-1343:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1343: Product placement
free
ISO/TS 10303-1345:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1345: Item definition structure
free
ISO/TS 10303-1348:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1348: Requirement management
free
ISO/TS 10303-1400:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1400: Product environment definition
free
ISO/TS 10303-1401:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1401: Product environment observed
free
ISO/TS 10303-1403:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1403: Geometric model relationship
free
ISO/TS 10303-1467:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1467: Risk management
free
ISO/TS 10303-1473:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1473: Description assignment
free
ISO/TS 10303-1476:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1476: Analysis identification
free
ISO/TS 10303-1484:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1484: System identification and version
free
ISO/TS 10303-1485:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1485: System view definition
free
ISO/TS 10303-1488:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1488: Verification and validation
free
ISO/TS 10303-1514:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1514: Advanced boundary representation
free
ISO/TS 10303-1613:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1613: Physi-cal unit non planar design view
free
ISO/TS 10303-1628:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1628: Design product data management
free
ISO/TS 10303-1634:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1634: Assembly component placement requirements
free
ISO/TS 10303-1646:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1646: Footprint definition
free
ISO/TS 10303-1651:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1651: Basic curve
free
ISO/TS 10303-1652:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1652: Basic geometry
free
ISO/TS 10303-1654:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1654: Characteristic
free
14 ISO Update, Supplement to ISO Focus -- October 2010
ISO/TS 10303-1655:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1655: Chemical substance
free
ISO/TS 10303-1656:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1656: Component grouping
free
ISO/TS 10303-1668:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1668: Fabrication joint
free
ISO/TS 10303-1670:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1670: Fabrication technology
free
ISO/TS 10303-1671:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1671: Feature and connection zone
free
ISO/TS 10303-1672:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1672: Fill area style
free
ISO/TS 10303-1682:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1682: Interconnect 2D shape
free
ISO/TS 10303-1689:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1689: Interconnect physical requirement allocation
free
ISO/TS 10303-1692:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1692: Land
free
ISO/TS 10303-1696:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1696: Lay-ered interconnect module 3D design
free
ISO/TS 10303-1698:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1698: Layered interconnect module design
free
ISO/TS 10303-1700:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1700: Lay-ered interconnect module with printed component design
free
ISO/TS 10303-1703:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1703: Model parameter
free
ISO/TS 10303-1705:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1705: Functional usage view
free
ISO/TS 10303-1707:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1707: Package
free
ISO/TS 10303-1710:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1710: Pack-aged part black box model
free
ISO/TS 10303-1713:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1713: Part feature grouping
free
ISO/TS 10303-1714:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1714: Part feature location
free
ISO/TS 10303-1716:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1716: Lay-ered interconnect complex template
free
ISO/TS 10303-1718:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1718: Layered interconnect simple template
free
ISO/TS 10303-1720:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1720: Part template shape with parameters
free
ISO/TS 10303-1724:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1724: Physi-cal unit 2D design view
free
ISO/TS 10303-1725:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1725: Physi-cal unit 3D design view
free
ISO/TS 10303-1728:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1728: Physi-cal unit design view
free
ISO/TS 10303-1730:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1730: Physi-cal unit shape with parameters
free
ISO/TS 10303-1731:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1731: Constructive solid geometry 2D
free
ISO/TS 10303-1732:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1732: Physi-cal unit usage view
free
ISO/TS 10303-1737:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1737: Printed physical layout template
free
ISO/TS 10303-1739:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1739: Production rule
free
ISO/TS 10303-1740:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1740: Requirement decomposition
free
ISO/TS 10303-1741:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1741: Sequential laminate assembly design
free
ISO/TS 10303-1747:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1747: Specification document
free
ISO/TS 10303-1749:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1749: Styled curve
free
ISO/TS 10303-1750:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1750: Text representation
free
ISO/TS 10303-1752:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1752: Thermal network definition
free
ISO Update, Supplement to ISO Focus -- October 2010 15
ISO/TS 10303-1755:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1755: Physi-cal connectivity definition
free
ISO/TS 10303-1756:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1756: Conductivity material aspects
free
ISO/TS 10303-1764:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1764: Shape feature
free
ISO/TS 10303-1765:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1765: Characterizable object
free
ISO/TS 10303-1767:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1767: Composite constituent shape
free
ISO/TS 10303-1786:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1786: Risk definition
free
ISO/TS 10303-1791:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1791: Primitive solids
free
ISO/TS 10303-1793:2010
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1793: Solid model
free
ISO/TS 10303-1800:2010
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1800: Support resource
free
TC 185 Safety devices for protection against excessive pressure
ISO 4126-10:2010
Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves for gas/liquid two-phase flow
S
TC 188 Small craft
ISO 12215-8:2009/Cor 1:2010
Small craft — Hull construction and scantlings — Part 8: Rudders — Tech-nical Corrigendum 1
free
TC 189 Ceramic tile
ISO 13007-1:2010
* Ceramic tiles — Grouts and adhe-sives — Part 1: Terms, definitions and specifications for adhesives
D
ISO 13007-2:2010
* Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives
Q
ISO 13007-3:2010
* Ceramic tiles — Grouts and adhe-sives — Part 3: Terms, definitions and specifications for grouts
D
ISO 13007-4:2010
* Ceramic tiles — Grouts and adhesives — Part 4: Test methods for grouts
L
TC 190 Soil quality
ISO/TS 29843-1:2010
Soil quality — Determination of soil microbial diversity — Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis
E
TC 194 Biological evaluation of medical devices
ISO 10993-10:2010
Biological evaluation of medical de-vices — Part 10: Tests for irritation and skin sensitization
V
TC 204 Intelligent transport systems
ISO/TR 11769:2010
* Intelligent transport systems — Com-munications access for land mobiles (CALM) — Data retention for law enforcement
C
ISO/TS 14907-1:2010/Cor 1:2010
* Electronic fee collection — Test proce-dures for user and fixed equipment — Part 1: Description of test procedures — Technical Corrigendum 1
free
ISO 24101-2:2010
* Intelligent transport systems — Com-munications access for land mobiles (CALM) — Application management — Part 2: Conformance test
U
TC 206 Fine ceramics
ISO 10678:2010
Fine ceramics (advanced ceramics, advanced technical ceramics) — De-termination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
F
TC 213 Dimensional and geometrical product specifications and verification
ISO 10360-5:2010
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring ma-chines (CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems
P
TC 216 Footwear
ISO/TR 16178:2010
Footwear — Critical substances poten-tially present in footwear and footwear components
S
TC 219 Floor coverings
ISO 10582:2010
* Resilient floor coverings — Heteroge-neous poly(vinyl chloride) floor cover-ings — Specification
D
ISO 10595:2010
* Resilient floor coverings — Semi-flex-ible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles — Specification
D
TC 229 Nanotechnologies
ISO/TS 10867:2010
Nanotechnologies — Characteriza-tion of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
G
ISO 29701:2010
* Nanotechnologies — Endotoxin test on nanomaterial samples for in vitro systems — Limulus amebocyte lysate (LAL) test
K
TC 232 Learning services for non-formal education and training
ISO 29990:2010
Learning services for non-formal edu-cation and training — Basic require-ments for service providers
J
JTC 1 Information technology
ISO/IEC 19793:2008/Cor 1:2010
* Information technology — Open Dis-tributed Processing — Use of UML for ODP system specifications — Techni-cal Corrigendum 1
free
ISO/IEC TR 24748-1:2010
* Systems and software engineering — Life cycle management — Part 1: Guide for life cycle management
W
ISO/IEC TR 24774:2010
* Systems and software engineering — Life cycle management — Guidelines for process description
H
ISO/IEC 7811-6:2008/Cor 1:2010
* Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity — Technical Corrigen-dum 1: .
free
16 ISO Update, Supplement to ISO Focus -- October 2010
ISO/IEC 10373-3:2010
* Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related interface devices
U
ISO/IEC 15693-1:2010
* Identification cards — Contactless in-tegrated circuit cards — Vicinity cards — Part 1: Physical characteristics
C
ISO/IEC 24727-3:2008/Cor 1:2010
* Identification cards — Integrated circuit card programming interfaces — Part 3: Application interface — Technical Corrigendum 1
free
ISO/IEC TR 24772:2010
* Information technology — Program-ming languages — Guidance to avoiding vulnerabilities in programming languages through language selection and use
XB
ISO/IEC 29124:2010
* Information technology — Program-ming languages, their environments and system software interfaces — Ex-tensions to the C++ Library to support mathematical special functions
L
ISO/IEC 19775-2:2010
* Information technology — Computer graphics and image processing — Extensible 3D (X3D) — Part 2: Scene access interface (SAI)
B
ISO/IEC 13818-1:2007/Amd 4:2009
* Information technology — Generic coding of moving pictures and as-sociated audio information: Systems — Part 1: — Amendment 4: Transport of multiview video over Rec. ITU-T H.222.0 | ISO/IEC 13818-1
L
ISO/IEC 14496-2:2004/Cor 4:2010
* Information technology — Coding of audio-visual objects — Part 2: Visual — Technical Corrigendum 4
free
ISO/IEC 14496-5:2001/Amd 10:2007/Cor 4:2010
* Information technology — Coding of audio-visual objects — Part 5: Refer-ence software — Amendment 10: SSC, DST, ALS and SLS reference software — Technical Corrigendum 4
free
ISO/IEC 14496-26:2010/Amd 2:2010
* Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Amendment 2: BSAC conformance for broadcasting
XZ
ISO/IEC 29199-2:2010
* Information technology — JPEG XR image coding system — Part 2: Image coding specification
XD
ISO/IEC 29159-1:2010
* Information technology — Biometric calibration, augmentation and fusion data — Part 1: Fusion information format
L
Standards confirmed
The following International Standards are confimred for a five year period:
TC 22 Road vehicles
ISO 6797:1982 (reconfirmed)
TC 23 Tractors and machinery for agriculture and forestry
ISO 789-4:1986 (reconfirmed)
ISO 14269-1:1997 (reconfirmed)
ISO 14269-4:1997 (reconfirmed)
ISO 14269-5:1997 (reconfirmed)
ISO 6534:2007
ISO 9467:1993 (reconfirmed)
TC 25 Cast irons and pig irons
ISO 2892:2007
TC 46 Information and documentation
ISO 15706-2:2007
TC 61 Plastics
ISO 21367:2007
TC 92 Fire safety
ISO/TR 15656:2003
TC 94 Personal safety -- Protective clothing and equipment
ISO 9185:2007
ISO 15025:2000 (reconfirmed)
ISO 17493:2000 (reconfirmed)
TC 96 Cranes
ISO 7296-3:2006
ISO 9942-3:1999 (reconfirmed)
TC 104 Freight containers
ISO 1496-4:1991 (reconfirmed)
TC 121 Anaesthetic and respiratory equipment
ISO 8185:2007
TC 136 Furniture
ISO 21016:2007
TC 160 Glass in building
ISO 10291:1994 (reconfirmed)
ISO 16933:2007
ISO 16934:2007
ISO 16935:2007
TC 162 Doors and windows
ISO 15821:2007
ISO 15822:2007
TC 172 Optics and photonics
ISO 10110-12:2007
TC 204 Intelligent transport systems
ISO/TS 20452:2007
TC 211 Geographic information/Geomatics
ISO/TS 19138:2006
TC 219 Floor coverings
ISO 24343-1:2007
Standards withdrawn
Period from 25 August to 30 September 2010
TC 2 Fasteners
ISO 225:1983 (replaced by ISO 225:2010)
ISO Update, Supplement to ISO Focus -- October 2010 17
TC 17 Steel
ISO 10332:1994 (replaced by ISO 10332:2010)
TC 20 Aircraft and space vehicles
ISO 12273:1997 (replaced by ISO 12273:2010)
ISO 15893:2000 (replaced by ISO 15893:2010)
ISO 22647:2006 (replaced by ISO 22647:2010)
TC 22 Road vehicles
ISO 8721:1987 (replaced by ISO 8721:2010)
TC 27 Solid mineral fuels
ISO/TS 12902:2001
(replaced by ISO 29541:2010)
TC 34 Food products
ISO 15161:2001 (replaced by )
ISO 13720:1995 (replaced by ISO 13720:2010)
ISO/TS 3632-2:2003
(replaced by ISO 3632-2:2010)
TC 38 Textiles
ISO 12952-1:1998 (replaced by ISO 12952-1:2010)
ISO 12952-2:1998 (replaced by ISO 12952-1:2010)
ISO 12952-3:1998 (replaced by ISO 12952-2:2010)
ISO 12952-4:1998 (replaced by ISO 12952-2:2010)
TC 43 Acoustics
ISO 3741:1999 (replaced by ISO 3741:2010)
ISO 3743-1:1994 (replaced by ISO 3743-1:2010)
ISO 3744:1994 (replaced by ISO 3744:2010)
TC 44 Welding and allied processes
ISO 14171:2002 (replaced by ISO 14171:2010)
ISO 24034:2005 (replaced by ISO 24034:2010)
ISO 24034:2005/Amd 1:2008
(replaced by ISO 24034:2010)
TC 45 Rubber and rubber products
ISO 6472:2004 (replaced by ISO 6472:2010)
ISO 34-1:2004 (replaced by ISO 34-1:2010)
ISO 48:2007 (replaced by ISO 48:2010)
ISO 4647:1982 (replaced by ISO 4647:2010)
ISO 4649:2002 (replaced by ISO 4649:2010)
ISO 4666-1:1982 (replaced by ISO 4666-1:2010)
ISO 4666-3:1982 (replaced by ISO 4666-3:2010)
ISO 7619-1:2004 (replaced by ISO 7619-1:2010)
ISO 7619-1:2004/Amd 1:2008
(replaced by ISO 7619-1:2010)
ISO 7619-2:2004 (replaced by ISO 7619-2:2010)
TC 58 Gas cylinders
ISO 13341:1997 (replaced by ISO 13341:2010)
TC 59 Buildings and civil engineering works
ISO 8394:1988 (replaced by ISO 8394-1:2010, ISO 8394-2:2010)
TC 61 Plastics
ISO 15527:2007 (replaced by ISO 15527:2010)
ISO 18280:2005 (replaced by ISO 18280:2010)
ISO 2558:1974 (replaced by ISO 2558:2010)
TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries
ISO 13680:2008 (replaced by ISO 13680:2010)
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 6784:1982 (replaced by ISO 1920-10:2010)
TC 76 Transfusion, infusion and injection equipment for medical and pharmaceu-tical use
ISO 8536-4:2007 (replaced by ISO 8536-4:2010)
ISO 9187-1:2006 (replaced by ISO 9187-1:2010)
ISO 9187-2:1993 (replaced by ISO 9187-2:2010)
TC 79 Light metals and their alloys
ISO 6719:1986 (replaced by ISO 6719:2010)
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 8769:1988 (replaced by ISO 8769:2010)
ISO 8769-2:1996 (replaced by ISO 8769:2010)
ISO 12790-1:2001 (replaced by ISO 28218:2010)
TC 104 Freight containers
ISO/PAS 17712:2006
(replaced by ISO 17712:2010)
TC 106 Dentistry
ISO 11609:1995 (replaced by ISO 11609:2010)
TC 107 Metallic and other inorganic coatings
ISO 28706-5:2008 (replaced by ISO 28706-5:2010)
TC 127 Earth-moving machinery
ISO 21507:2005 (replaced by ISO 21507:2010)
TC 131 Fluid power systems
ISO 19879:2005 (replaced by ISO 19879:2010)
TC 172 Optics and photonics
ISO 10110-8:1997 (replaced by ISO 10110-8:2010)
TC 184 Automation systems and integration
ISO/TS 10303-1001:2008
(replaced by ISO/TS 10303-1001:2010)
ISO/TS 10303-1003:2008
(replaced by ISO/TS 10303-1003:2010)
ISO/TS 10303-1006:2006
(replaced by ISO/TS 10303-1006:2010)
ISO/TS 10303-1007:2008
(replaced by ISO/TS 10303-1007:2010)
ISO/TS 10303-1047:2004
(replaced by ISO/TS 10303-1047:2010)
ISO/TS 10303-1132:2008
(replaced by ISO/TS 10303-1132:2010)
ISO/TS 10303-1141:2006
(replaced by ISO/TS 10303-1141:2010)
ISO/TS 10303-1309:2008
(replaced by ISO/TS 10303-1309:2010)
ISO/TS 10303-1310:2008
(replaced by ISO/TS 10303-1310:2010)
ISO/TS 10303-1312:2008
(replaced by ISO/TS 10303-1312:2010)
ISO/TS 10303-1323:2008
(replaced by ISO/TS 10303-1323:2010)
ISO/TS 10303-1514:2008
(replaced by ISO/TS 10303-1514:2010)
ISO/TS 10303-1672:2008
(replaced by ISO/TS 10303-1672:2010)
ISO/TS 10303-1747:2008
(replaced by ISO/TS 10303-1747:2010)
ISO/TS 10303-1749:2008
(replaced by ISO/TS 10303-1749:2010)
18 ISO Update, Supplement to ISO Focus -- October 2010
ISO/TS 10303-1750:2008
(replaced by ISO/TS 10303-1750:2010)
ISO/TS 10303-1756:2006
(replaced by ISO/TS 10303-1756:2010)
ISO/TS 10303-1764:2006
(replaced by ISO/TS 10303-1764:2010)
ISO/TS 10303-1765:2006
(replaced by ISO/TS 10303-1765:2010)
ISO/TS 10303-1767:2008
(replaced by ISO/TS 10303-1767:2010)
TC 189 Ceramic tile
ISO 13007-1:2004 (replaced by ISO 13007-1:2010)
ISO 13007-2:2005 (replaced by ISO 13007-2:2010)
ISO 13007-3:2004 (replaced by ISO 13007-3:2010)
ISO 13007-4:2005 (replaced by ISO 13007-4:2010)
TC 213 Dimensional and geometrical product specifications and verification
ISO 10360-5:2000 (replaced by ISO 10360-5:2010)
ISO/PAS 12868:2009
(replaced by ISO 10360-5:2010)
JTC 1 Information technology
ISO/IEC TR 24774:2007
(replaced by ISO/IEC TR 24774:2010)
ISO/IEC 10373-3:2001
(replaced by ISO/IEC 10373-3:2010)
ISO/IEC 15693-1:2000
(replaced by ISO/IEC 15693-1:2010)
ISO/IEC 19775-2:2004
(replaced by ISO/IEC 19775-2:2010)
ISO/IEC 29199-2:2009
(replaced by ISO/IEC 29199-2:2010)
Meeting calendar
(update at 25 August 2010)
Meetings called for the month of September are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
October 2010
1 Paris (France) TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys
1 Houston (USA) TC 193 Natural gas
1 Houston (USA) TC 193/SC 1 Natural gas/Analysis of natural gas
1 Beijing (China) TC 201/SC 3 Surface chemi-cal analysis/Data management and treatment
1 Beijing (China) TC 201/SC 4 Surface chemi-cal analysis/Depth profiling
1 Beijing (China) TC 201/SC 5 Surface chemical analysis/Auger elec-tron spectroscopy
1 Beijing (China) TC 201/SC 7 Surface chemi-cal analysis/X-ray photoelectron spectroscopy
1 San Francisco (USA)
TC 250 Project committee: Sustainability in event management
2 Beijing (China) TC 201/SC 6 Surface chemi-cal analysis/Sec-ondary ion mass spectrometry
2 Beijing (China) TC 201/SC 8 Surface chemical analysis/Glow dis-charge spectroscopy
4-5 Geneva (Switzerland)
TAG 8 Building
4-5 Tokyo (Japan) TC 209 Cleanrooms and as-sociated controlled environments
4-6 Mechelen (Belgium)
TC 8/SC 2 Ships and marine technology/Ma-rine environment protection
4-8 Pulawy (Poland) TC 190 Soil quality
4-8 Pulawy (Poland) TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification
4-8 Kyoto (Japan) TC 217 Cosmetics
5 Köln (Germany) TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology
5-7 Bochum (Germany)
TC 96/SC 10 Cranes/Design princi-ples and requirements
5-8 Orlando (USA) TC 69/SC 1 Applications of statis-tical methods/Termi-nology and symbols
6 Brussels (Belgium)
TC 173 Assistive products for persons with disability
6-8 Takamatsu (Japan)
JTC 1/SC 17 Information technol-ogy/Cards and per-sonal identification
7 Pulawy (Poland) TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics
7 Pulawy (Poland) TC 190/SC 4 Soil quality/Biological methods
7 Pulawy (Poland) TC 190/SC 7 Soil quality/Soil and site assessment
8 Westminster, Colorado (USA)
TC 28/SC 2 Petroleum products and lubricants/Meas-urement of petroleum and related products
8 Tokyo (Japan) TC 122/SC 4 Packaging/Packaging and Environment
9 Garching (Germany)
TC 60 Gears
10-11 Berlin (Germany) JTC 1/SC 27 Information tech-nology/IT Security techniques
11-13 Luxemburg (Luxembourg)
TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water
ISO Update, Supplement to ISO Focus -- October 2010 19
11-13 Pretoria (South Africa)
TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction
11-14 Dayton, Ohio (USA)
TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
11-16 Sao Paulo (Brazil)
TC 130 Graphic technology
12 New Orleans (USA)
TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims
12-14 Paris (France) TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
12-14 St-Denis (France)
TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
12-15 London (United Kingdom)
TC 172/SC 1 Optics and photon-ics/Fundamental standards
13 Pretoria (South Africa)
TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages
13 Pretoria (South Africa)
TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works
13 London (United Kingdom)
TC 221 Geosynthetics
13-14 New Orleans (USA)
TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims
13-15 Berlin (Germany) TC 37/SC 4 Terminology and other language and content resources/Language resource management
14 Pretoria (South Africa)
TC 59/SC 15 Buildings and civil engineering works/Performance criteria for single family at-tached and detached dwellings
14-15 Lisbon (Portugal) TC 253 Project committee: Treated wastewater re-use for irrigation
15 New Orleans (USA)
TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims
15 Pretoria (South Africa)
TC 59 Buildings and civil engineering works
15 Delft (Netherlands)
TC 238 Solid biofuels
18-21 London (United Kingdom)
TC 183 Copper, lead, zinc and nickel ores and concentrates
18-22 Independence (USA)
TC 2 Fasteners
18-22 Independence (USA)
TC 2/SC 10 Fasteners/Prod-uct standards for fasteners
18-22 Incheon (Korea, Republic of)
TC 8 Ships and marine technology
18-22 Adelaide (Australia)
TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
18-22 Haarlem (Netherlands)
TC 45 Rubber and rubber products
18-22 Weinheim (Germany)
TC 69/SC 4 Applications of statis-tical methods/Appli-cations of statistical methods in process management
18-22 Portland, Oregon (USA)
TC 113 Hydrometry
18-22 Tokyo (Japan) TC 131 Fluid power systems
18-22 Beijing (China) TC 242 Project Committee: Energy Management
19 Shanghai (China) TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)
19-21 Vienna (Austria) TC 58/SC 3 Gas cylinders/Cylin-der design
20 Independence (USA)
TC 2/SC 7 Fasteners/Refer-ence standards for fasteners (mainly covering terminology, dimensioning, sizes and tolerancing)
20 Shanghai (China) TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
20 Shanghai (China) TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels
20-21 St-Denis (France)
TC 17/SC 3 Steel/Steels for struc-tural purposes
20-22 Tokyo (Japan) TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments
21 Independence (USA)
TC 2/SC 1 Fasteners/Me-chanical properties of fasteners
21 Tokyo (Japan) TC 131/SC 5 Fluid power systems/Control products and components
21 Shanghai (China) TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications
21 Shanghai (China) TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
21-22 Vienna (Austria) TC 58 Gas cylinders
20 ISO Update, Supplement to ISO Focus -- October 2010
21-22 Wiesbaden (Germany)
TC 159 Ergonomics
22 Haarlem (Netherlands)
TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry
22 Haarlem (Netherlands)
TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
22 Shanghai (China) TC 138 Plastics pipes, fittings and valves for the transport of fluids
24-25 Portland, Oregon (USA)
TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
25-26 Bratislava (Slovakia)
TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel
25-28 Delft (Netherlands)
TC 46/SC 11 Information and doc-umentation/Archives/records management
25-29 Pretoria (South Africa)
TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices
26 Frankfurt (Germany)
TC 112 Vacuum technology
26-27 Doha (Qatar) TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
26-28 Rio de Janeiro (Brazil)
TC 126 Tobacco and tobacco products
27 Paris (France) TC 149/SC 1 Cycles/Cycles and major sub-assemblies
27-28 Bangkok (Thailand)
TC 173/SC 1 Assistive products for persons with disability/Wheelchairs
27-29 Okinawa (Japan) TC 202 Microbeam analysis
28 Hangzhou (China)
TC 92/SC 3 Fire safety/Fire threat to people and environment
28-29 Budapest (Hungary)
TC 184/SC 2 Automation systems and integration/Robots and robotic devices
29 Hangzhou (China)
TC 92/SC 4 Fire safety/Fire safety engineering
18-22 Haarlem (Netherlands)
TC 45/SC 1 Rubber and rubber products/Hoses (rub-ber and plastics)
November 2010
1-5 Gaithersburg (USA)
JTC 1/SC 7 Information technol-ogy/Software and systems engineering
1-5 Jeju (Korea, Republic of)
* TC 204 Intelligent transport systems
1-5 Berlin (Germany) * TC 241 Project Committee: Road-Traffic Safety Management System
4 London (United Kingdom)
TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters
4 Berlin (Germany) TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement
4 London (United Kingdom)
TC 92/SC 1 Fire safety/Fire initia-tion and growth
5 London (United Kingdom)
TC 22/SC 7 Road vehicles/Injec-tion equipment and filters for use on road vehicles
5 Venice (Italy) TC 23/SC 19 Tractors and machin-ery for agriculture and forestry/Agricultural electronics
5 Berlin (Germany) TC 70 Internal combustion engines
8 Shenzen (China) * TC 160 Glass in building
8-9 Düsseldorf (Germany)
TC 17/SC 4 Steel/Heat treatable and alloy steels
8-10 Suresnes (France)
TC 20 Aircraft and space vehicles
8-13 Belfast (United Kingdom)
JTC 1 Information technology
9 Osaka (Japan) TC 227 Springs
10 Rome (Italy) TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
10-11 Mainz (Germany) TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction
10-12 Pirmasens (Germany)
* TC 137 Footwear sizing des-ignations and marking systems
11 (USA) TC 22/SC 19 Road vehicles/Wheels
15 Santiago (Chile) TC 243 Project Committee: Consumer product safety
15 Alexandria (USA) TC 244 Industrial furnaces and associated thermal processing equipment
15-17 Sydney (Australia)
TC 205 Building environment design
15-18 Santiago (Chile) TC 240 Project Committee: Product recall
15-19 Melbourne (Australia)
TC 181 Safety of toys
16 Shanghai (China) TC 142 Cleaning equipment for air and other gases
17-18 Beijing (China) TC 91 Surface active agents
17-18 Delft (Netherlands)
TC 159/SC 3 Ergonomics/An-thropometry and biomechanics
18-19 Paris (France) * CASCO Committee on con-formity assessment
19 Paris (France) TC 59/SC 17 Buildings and civil engineering works/Sustainability in build-ing construction
19 Tokyo (Japan) ** TC 94 Personal safety -- Protective clothing and equipment
ISO Update, Supplement to ISO Focus -- October 2010 21
22-23 Hannover (Germany)
TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
22-24 Mumbay (India) TC 252 Project committee: Natural gas fuelling stations for vehicles
24-25 Bangkok (Thailand)
TC 234 Fisheries and aquaculture
24-26 London (United Kingdom)
TC 59/SC 14 Buildings and civil engineering works/Design life
26 Sevilla (Spain) TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection
29-30 Tokyo (Japan) TC 173/SC 7 Assistive products for persons with disabil-ity/Accessible design for assistive products
November-December 2010
29-3 Bangkok (Thailand)
TC 223 Societal Security
December 2010
2 London (United Kingdom)
TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications
2-3 Kuala Lumpur (Malaysia)
TC 206 Fine ceramics
3 Winterthur (Switzerland)
JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage
3 Delft (Netherlands)
TC 98 Bases for design of structures
6-10 Kuala Lumpur (Malaysia)
TC 229 Nanotechnologies
9 Miami (USA) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
9-10 Beijing (China) TC 93 Starch (includ-ing derivatives and by-products)
9-10 Canberra (Australia)
TC 211 Geographic in-formation/Geomatics
13-17 Sydney (Australia)
TC 176/SC 2 Quality management and quality assur-ance/Quality systems
2nd Semester 2010
Bangalore (India) ** TC 34/SC 15 Food products/Coffee
Month unknown 2010
(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
January 2011
10-11 Oxford (United Kingdom)
* TC 37/SC 4 Terminology and other language and content resources/Language resource management
11-12 Singapore (Singapore)
* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
17-21 Orlando (USA) TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma
17-21 Winterthur (Switzerland)
** TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment
17-21 Orlando (USA) ** TC 121/SC 6 Anaesthetic and res-piratory equipment/Medical gas systems
27 Las Vegas (USA) TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
Paris (France) ** TC 213 Dimensional and geometrical product specifications and verification
February 2011
18 (USA) ** TC 154 Processes, data elements and documents in com-merce, industry and administration
21-25 Seattle (USA) ** JTC 1/SC 35 Information technol-ogy/User interfaces
21-25 Osaka (Japan) TC 107 Metallic and other inorganic coatings
23 Paris (France) * TC 23/SC 2 Tractors and machin-ery for agriculture and forestry/Common tests
23-24 (Unknown) ** TMB Technical Manage-ment Board
February-March 2011
28-4 Berlin (Germany) * TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
March 2011
12-18 Strasbourg (France)
* JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
15-16 Geneva (Switzerland)
** COUNCIL Council
17-18 Geneva (Switzerland)
* COUNCIL Council
18-19 Tokyo (Japan) * TC 219 Floor coverings
21-25 Milan (Italy) TC 118 Compressors and pneumatic tools, ma-chines and equipment
21-25 Milan (Italy) TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines
28-29 Berlin (Germany) * TC 117 Fans
22 ISO Update, Supplement to ISO Focus -- October 2010
April 2011
3-8 Paris (France) ** TC 92/SC 3 Fire safety/Fire threat to people and environment
3-8 Berlin (Germany) * TC 127 Earth-moving machinery
4-5 Madrid (Spain) * TC 34/SC 11 Food products/Animal and vegetable fats and oils
4-8 London (United Kingdom)
** TC 43 Acoustics
4-8 London (United Kingdom)
* TC 43/SC 1 Acoustics/Noise
4-8 London (United Kingdom)
* TC 43/SC 2 Acoustics/Building acoustics
4-8 (Netherlands) ** TC 153/SC 1 Valves/Design, manu-facture, marking and testing
8 Paris (France) TC 92 Fire safety
8 (Italy) ** TC 228 Tourism and related services
11 Stuttgart (Germany)
** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
11-15 Tokyo (Japan) ** TC 210 Quality management and corresponding general aspects for medical devices
13-14 Dresden (Germany)
* TC 199 Safety of machinery
15-30 Madrid (Spain) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals
(Unknown) ** TC 84 Devices for adminis-tration of medicinal products and intra-vascular catheters
May 2011
2-6 Sydney (Australia)
* TC 46 Information and documentation
3-4 Paris (France) * TC 44/SC 3 Welding and allied processes/Welding consumables
7-10 (Netherlands) ** TC 68/SC 4 Financial services/Securities and related financial instruments
9-13 Berlin (Germany) ** TC 114 Horology
12 Amsterdam (Netherlands)
** TC 68 Financial services
15 Zurich (Switzerland)
** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
16-18 Frankfurt (Germany)
* TC 214 Elevating work platforms
16-20 Stockholm (Sweden)
* TC 156 Corrosion of metals and alloys
18-19 Pau (France) ** TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
23-24 Stavanger (Norway)
** TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment
23-25 Stockholm (Sweden)
* TC 29/SC 2 Small tools/High speed steel cut-ting tools and their attachments
23-27 Chicago (USA) ** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
23-27 Stockholm (Sweden)
* TC 29 Small tools
23-27 Stockholm (Sweden)
* TC 29/SC 5 Small tools/Grinding wheels and abrasives
23-27 Stockholm (Sweden)
* TC 29/SC 9 Small tools/Tools with cutting edges made of hard cutting materials
23-27 Salt Lake City (USA)
** TC 171 Document manage-ment applications
23-28 Jeju (Korea, Republic of)
* TC 147 Water quality
25-31 St. Peters-burg (Russian Federation)
** TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
26-27 Delft (Netherlands)
* TC 211 Geographic in-formation/Geomatics
Paris (France) ** TC 6 Paper, board and pulps
(Korea, Repub-lic of)
** TC 202 Microbeam analysis
May-June 2011
30-4 Pretoria (South Africa)
TC 96 Cranes
30-4 Pretoria (South Africa)
TC 96/SC 3 Cranes/Selection of wire ropes
30-4 Pretoria (South Africa)
TC 96/SC 6 Cranes/Mobile cranes
30-4 Pretoria (South Africa)
TC 96/SC 8 Cranes/Jib cranes
June 2011
6-9 (Austria) ** TC 145 Graphical symbols
8-9 (Unknown) ** TMB Technical Manage-ment Board
12-17 Seoul (Korea, Republic of)
** TC 37 Terminology and other language and content resources
13-17 Brussels (Belgium)
* TC 4 Rolling bearings
13-17 Vancouver (Canada)
** TC 121 Anaesthetic and res-piratory equipment
13-17 Vancouver (Canada)
** TC 121/SC 6 Anaesthetic and res-piratory equipment/Medical gas systems
14-18 Vancouver (Canada)
** TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment
ISO Update, Supplement to ISO Focus -- October 2010 23
20-24 (USA) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems
29-30 London (United Kingdom)
** TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
San Francisco (USA)
** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
(South Africa) ** TC 137 Footwear sizing des-ignations and marking systems
2nd Quarter 2011
Prague (Czech Republic)
** TC 204 Intelligent transport systems
(USA) ** TC 226 Materials for the production of primary aluminium
July 2011
11-15 Delft (Netherlands)
* REMCO Committee on refer-ence materials
24 Turin (Italy) * JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information
August 2011
(Sweden) ** JTC 1/SC 35 Information technol-ogy/User interfaces
September 2011
9-15 Chicago (USA) ** TC 163 Thermal performance and energy use in the built environment
12-14 Chicago (USA) * TC 205 Building environment design
12-16 Rotorua (New Zealand)
* TC 218 Timber
13-15 Moscow (Rus-sian Federation)
** TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
15-17 (Italy) ** TC 201 Surface chemical analysis
18-24 Paris (France) * TC 164 Mechanical testing of metals
19-23 Bali (Indonesia) * TC 165 Timber structures
20-23 Washington, D.C (USA)
** TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes
24 New Delhi (India) * COUNCIL Council
Shanghai (China) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
Chicago (USA) ** TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and fixed firefighting sys-tems using foam and powder
(France) ** TC 59/SC 8 Buildings and civil engineering works/Sealants
Beijing (China) ** TC 213 Dimensional and geometrical product specifications and verification
(Unknown) ** TMB Technical Manage-ment Board
3rd Quarter 2011
(USA) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis
(United Kingdom)
** TC 41/SC 1 Pulleys and belts (including veebelts)/Friction
(United Kingdom)
** TC 41/SC 3 Pulleys and belts (including veebelts)/Conveyor belts
(United Kingdom)
** TC 41/SC 4 Pulleys and belts (including veebelts)/Synchronous belt drives
October 2011
3-7 Sydney (Australia)
* TC 89 Wood-based panels
6-7 Geneva (Switzerland)
* CASCO Committee on con-formity assessment
24-28 Moscow (Rus-sian Federation)
** TC 178 Lifts, escalators and moving walks
(Korea, Repub-lic of)
** JTC 1/SC 17 Information technol-ogy/Cards and per-sonal identification
(Japan) ** TC 34/SC 17 Food products/Man-agement systems for food safety
(China) ** TC 111 Round steel link chains, chain slings, components and accessories
(China) ** TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings
(China) ** TC 111/SC 3 Round steel link chains, chain slings, components and accessories/Components and accessories
October-November 2011
31-3 London (United Kingdom)
** TC 46/SC 11 Information and doc-umentation/Archives/records management
November 2011
7-8 Berlin (Germany) TC 1 Screw threads
7-12 (USA) * JTC 1 Information technology
24 ISO Update, Supplement to ISO Focus -- October 2010
(Unknown) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments
(Japan) ** TC 38 Textiles
(Japan) ** TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
Pau (France) ** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
(Thailand) ** TC 123 Plain bearings
(Thailand) ** TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions
(Thailand) ** TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details
(Thailand) ** TC 123/SC 5 Plain bearings/Quality analysis and assurance
(Thailand) ** TC 123/SC 6 Plain bearings/Terms and common items
4th Quarter 2011
(Japan) ** TC 172/SC 3 Optics and photon-ics/Optical materials and components
(South Africa) ** TC 211 Geographic in-formation/Geomatics
Month unknown 2011
(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Edinburgh (Unit-ed Kingdom)
** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
Kyoto (Japan) ** TC 33 Refractories
(United Kingdom)
** TC 34/SC 9 Food products/Microbiology
(Netherlands) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids
(Australia) ** TC 190 Soil quality
(France) ** TC 206 Fine ceramics
January 2012
Charlotte (USA) ** TC 213 Dimensional and geometrical product specifications and verification
February 2012
(Korea, Repub-lic of)
** JTC 1/SC 35 Information technol-ogy/User interfaces
Florida (USA) ** TC 115 Pumps
March 2012
(China) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems
(Korea, Repub-lic of)
** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(Italy) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
April 2012
Durban (South Africa)
** TC 135 Non-destructive testing
Durban (South Africa)
** TC 135/SC 3 Non-destructive test-ing/Ultrasonic testing
Durban (South Africa)
** TC 135/SC 5 Non-destructive testing/Radiation methods
May 2012
7-11 Berlin (Germany) ** TC 46 Information and documentation
10 Chicago (USA) ** TC 68 Financial services
2nd Quarter 2012
(France) ** TC 211 Geographic in-formation/Geomatics
September 2012
19-21 San Diego (USA) ** GA General Assembly
22 San Diego (USA) ** COUNCIL Council
Cadiz (Spain) ** TC 213 Dimensional and geometrical product specifications and verification
4th Quarter 2012
(Saudi Arabia) ** TC 211 Geographic in-formation/Geomatics
Month unknown 2012
(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Vienna (Austria) ** REMCO Committee on refer-ence materials
Delft (Netherlands)
** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
(Unknown) ** TC 34 Food products
(USA) ** TC 44 Welding and allied processes
Chicago (USA) ** TC 68/SC 4 Financial services/Securities and related financial instruments
(South Africa) ** TC 102 Iron ore and direct reduced iron
ISO Update, Supplement to ISO Focus -- October 2010 25
Berlin (Germany) ** TC 107 Metallic and other inorganic coatings
Sydney (Australia)
** TC 138 Plastics pipes, fittings and valves for the transport of fluids
(Brazil) ** TC 164 Mechanical testing of metals
(Kenya) ** TC 190 Soil quality
(France) ** TC 205 Building environment design
(Thailand) ** TC 207 Environmental management
March 2013
(Kenya) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
Month unknown 2013
(USA) ** REMCO Committee on refer-ence materials
People and places
26 ISO Update, Supplement to ISO Focus+– October 2010
ISO Members
Since the September 2010 issue of ISO Focus+, the following changes affecting ISO members have occurred:
New CEO
Correspondent member
KYRGYZSTAN (KYRGYZST) Director: Mr. Alimbek Kurmanbaev MOLDOVA (INSM) General Director: Mr. Vitalie Dragancea
Address change
Member bodies
GHANA (GSB) Tel. +233 30 25 00 65 Fax +233 30 25 00 092 NIGERIA (SON) Web www.sononline.org
Correspondent member
SURINAME (SSB) E-mail [email protected]