S U P P L I E S F O R T H E
S T E E L R U L E D I E I N D U S T R Y
ONTARIO, CA • DALLAS, TX • ELMHURST, IL
www.wagnerdiesupply.com
Since 1947, Wagner has focused on providing customers with thebest in quality, value and service. That’s what our philosophy is all about – we provide our customers with more than justgreat supplies and equipment, we back up our products with the best in service and technical support in the industry.
This catalog is only a sampling of the wide variety of productswe carry. Please contact us or visit our website for completeproduct information.
A B O U T W A G N E R D I E S U P P LY A N D
O U R P H I L O S O P H Y
PROUD TO BE ASSOCIATED WITH:
WAGNER DIE SUPPLY ACCEPTS:
Download a printable PDF format credit card approval form from our website at:http://www.wagnerdiesupply.com/creditcardappr.htmlOr call us at (800) 423-4478 and request that onebe sent to you by fax or mail.
CREDIT ACCOUNTS:Terms: Net 30 days.Minimum order: $50.00Returned checks will be charged $30.00To establish a credit account with Wagner DieSupply, download a credit application from ourwebsite at:http://www.wagnerdiesupply.com/creditapp.htmlOr call us at (800) 423-4478 and request that onebe sent to you by fax or mail.
OVERAGE POLICY:On custom-made products Wagner Die Supplyreserves the right to ship up to a 10% overage.Your Wagner Die Supply customer servicerepresentative can answer any questions youmight have regarding our overage policy.
© 2018 Wagner Die Supply
Section Pages Product Group
1-2 WAGNER PUNCHES
3-6 STEEL RULE
7-10 DIEROOM SUPPLIES
11-12 EJECTION MATERIALS
13
DIEROOM EQUIPMENT
14-15
CREASING MATRIX
17 HENDERSON STORAGE SYSTEMS
16
DIECUTTING & MAKEREADY
C O N T E N T S
www.wagnerdiesupply.com800-423-4478 toll-free
or via email: [email protected]
1www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
W A G N E R P U N C H E S
A leader in punch manufacturing since 1947, Wagner Punches have always been manufactured in the U.S.A. under stringent qualitystandards. Wagner punches feature our industry-exclusiveEnduro CBN™ heat treating process. Wagner makes a wide varietyof in-stock punches and has the capability to produce just about any typeof custom punch imaginable, using our expertise and state-of-the-artCNC machining. Wagner punches are also identity-etched for easy identification and accurate reordering. For a complete listing of Wagnerpunches please contact us, or refer to the Wagner Punch Catalog, available on-line at www.wagnerdiesupply.com.
Seamless Tube Punches
Oval Tube Square Tube withand without Spring
Inside DiameterRelieved (cut-awayview shown)
007 Straight Cut -featuring minimumsupport bevel
Outside DiameterRelieved
Notched Tube Straight O.D. Rotary Serrated -Available in I.B. or C.B.
Inside-Bevel, Inside-Serrated Rotary
Standard Tube withEjectors
Standard Tube withSpring
Special Base
Cup Punches Cross Cuts Pin Points Washer Sets
W A G N E R P U N C H E S
2www.wagnerdiesupply.com
Seamless Hangers Feed Thru Feed Thru Ovals Serrated Feed Thru
Heavy WallFeed Thru
Clicker style FeedThru
Self-Cleaning - Standard, Knurled andKleen Cut™
Self-CleaningSerrated
Self-Cleaning withNo-Turn Pin
Self-CleaningSquares
Self-Cleaning Ovals Rule Connectors
Micrometer Adapter -for measuring rule andpunch heights up to 1”.
Custom-milled punches - designed and manufactured to customer specifications (materials and applications).
Custom-milled Punches
Contact us or visit www.wagnerdiesupply.com for the latest information!
O N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
3
S T E E L R U L E
Cutting Rule Profiles available in ground or shaved edge in several bevel angles.
Creasing Rule Profiles designed to make an impression in the die cut product for folding.
Perforating Rule available from 2 teeth per inch to 100 teeth per inch (TPI).
Wave Rule available in edge wave or full body wave, depending on wave required.
Tear Edge also known as zipper rule.
Rotary & Serrated Rule used in cylinder and flat bed cutting.
Center Bevel
Single Bevel
Long Center Bevel
Long Single Bevel
Known as: Typical uses:
Center Bevel, Standard Bevel, DoubleBevel, Center Face or A Bevel.
This is by far the most popular bevel forconventional paperboard cutting.Approximately 85% of all paperboard cut-ting is done with a Center Bevel rule.
Side Bevel, Single Bevel, Side Face,B Bevel or Flush Bevel
Single Bevel rule produces a square finish. It’s also used to produce tighter bends,compared to Center Bevel rule.
Long Center Bevel, Double Double Bevel,Center Face Double Bevel,Facet Bevel orAA Bevel
This rule is especially effective when cutting hard and/or thick materials.It helps reduce cutting pressure by deflectingpressure with the first bevel supported by thesecond bevel.
Standard length of Bevel: 2 pt. - 1/8” long3 pt. - 3/16” long, 4 pt. - 1/8” or 3/16” long
Standard length of Bevel: 2 pt. - 1/8” long3 pt. - 3/16” long, 4 pt. - 1/8” or 3/16” long
Long Side Bevel, Long Single Bevel,Side Face Double Bevel, Side Facet Bevelor BB Bevel.
Also used for cutting thicker and/orharder materials. The long Single Bevel designreduces the crush to the finish die cut productwhen the bevel faces away from the piece.
2 PT and 3 PTStandard Double
Round
2 PT body with a 3or 4 PT top
3 PT body with a4 , 6 or 8 PT top
4 PT body with a6 or 8 PT top
4, 6 and 8 PTSingle Round
2 PT body with a1 or 1.5 PT top
2 teeth per inch
6 teeth per inch
12 teeth per inch
3/32” tooth x 1/32” space
3/32” tooth x 3/32” space
3/16” tooth x 1/16” space
Corrugated edge wave Medium fine edge wave Medium angle full body wave
Patterns are not actual size, contact Wagner Die Supply for a full listing of exact sizes and styles.
Pattern is not actual size, contact Wagner Die Supply for a full listing of sizes and styles.
Rotary rule available in 8, 10, 12 and 13 serrated teeth per inch in curved and straight styles.
Serrated rule is designed for cutting foams, films and other materials that are difficult to cut.Available in a wide variety of teeth per inch configurations.
Contact Wagner Die Supply for a complete listing of National Steel Rule products.
Above is a limited sample of typical tooth and space configurations, many other configurations are available from our extensive inventory.
Thickness: 1 PT 1-1/2 PT 2 PT 3 PT 4 PT 6 PT 8 PT.014” (0.36 mm) .021” (0.53 mm) .028” (0.71 mm) .042” (1.07 mm) .056” (1.42 mm) .084” (2.13 mm) .112” (2.84 mm)
Other creasing rule profiles are available, like Tru-Fold, Positive Score and MicroTrak.
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
4
S T E E L R U L ECutting Rule -Manufacturers and their productswith specifications and applications.
Manufacturer Product Hardness Special Characteristics Product ApplicationTopH-75UniversalUniversal 40Universal 60Universal 75Extra Supreme TinitLabel-XPlast-XX-Press
TopDurFlex®
TopDurFlex S®
Special 60WTINBrilliant
Helmold 65 UltraflexHelmold 70 Helmold 80Helmold 85 Helmold Lazer BladeHelmold Lazer Blade HHelmold Lazer Blade DHelmold Lazer Blade HD
HP 34HP 40HP 44HP 51MM 40MM 44MM 52Supra Z
A = 45 HRC A = 51 HRCB = 35 HRC, C = 57 HRCB = 40 HRC, C = 57 HRCB = 45 HRC, C = 57 HRCB = 51 HRC, C = 58 HRCB = 40 HRC, C = 59 HRCUniversal, Universal 60UniversalB = 45 HRC, C = 58 HRCB = 35 HRC, C = 53 HRCB = 35 HRC, C = 57 HRC
B = 35 HRC, C = 53 HRC
A = 45 HRCA = 50 HRC A = 54 HRCA = 58 HRCB = 34 HRC, C = 57 HRC B = 45 HRC, C = 57 HRCB = 34 HRC, C = 57 HRCB = 34 HRC, C = 57 HRC
B = 34 HRC, C = 60 HRCB = 39 HRC, C = 67 HRCB = 46 HRC, C = 61 HRCB = 51 HRC, C = 61 HRCA = 40 HRCA = 44 HRCA = 52 HRCB = 40 HRC, C = 60 HRC
-------- Special coating, low-dust- Tin coated, Long life- Designed for labels- Designed for plastics- Self-levelling
- Shaved edge rule- Ground rule, edge hardened- Micro-ground rule- Tin coated- Hardened tip, slim bevel
- All purpose utility rule- Hard rule, longer runs- 80S and 80M for long life - Straight work- Edge hardened- - Extra deep edge hardened- Extra deep edge hardened
- Plasma beam hardened- Plasma beam hardened- Plasma beam hardened----- Fine ground edge bevel
- Cardboard, corrugated, labels.- Gaskets, rubber, cork, felt.- Cardboard, corrugated, labels.- Cardboard, corrugated, labels.- Plastics, thin gaskets, foils.- Metal foils, gaskets, plastics.- Gaskets, plastics, composites.- Labels, dust control. - Long die life.- Label cutting, foils, films.- Plastics, PET, PE, PP, PVC, foils.- Solid board, corrugated.
- Cardboard, labels, corrugated.-- Coated materials, foils.- Fast food, pharmaceutical.- Coated boards, foils, plastics.
---- - Packaging, kiss-cut, folding carton.
- Abrasive materials - Abrasive materials
- Recycled and virgin paperboard. - Recycled and virgin paperboard.- --- Paperboard, corrugated.-- Plastic, blister, laminated boards, labels.
A B
C
Through Hardened Edge Hardened, Softer Body
Refer to “Hardness” column for individual (HRC) Rockwell readings.
Premium Nataloy Nataloy EH
2PT., .937 EH SE AB 328’3PT., .937 EH SE AB 328’
B = 38 HRC, C = 54 HRCA = 41-44 HRC
B = 35 HRC, C = 57 HRC
- Induction hardened edge- Shaved or ground edge- Edge hardened
- Shaved edge- Edge hardened
- Solid fiber and corrugated.- Corrugated- Corrugated, folding carton.
- Folding carton, corrugated
More Steel Rule next page...
Coil Ends on the
LeftCoil Ends on the
Right
Bevel is always on top! Manufacturer Coil Direction: ClockwiseCoil Direction: Anti-Clockwise(or Counter-Clockwise)
Clockwise
R - Clockwise
R - Clockwise
DP (21” O.D.) , KX (18-3/8” O.D.)
Customer Specified.Customer Specified.
AC (21” O.D.), AB (18-3/8” O.D.)
Anti-Clockwise
Anti-Clockwise
RU - Anti-Clockwise
Anti-Clockwise Clockwise
Coil Direction Information for Auto Benders & Rule Processors:
Wagner refers to Anti-Clockwise as “AB” or “RW” for reverse wound.
RU
Note: Rules are also available in Dispenser Coilsthat are wound in a clockwise direction. WARNING: Dispenser Coils should never be used to load automated benders.
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
5
S T E E L R U L E
Creasing Rule
Cut-Crease, Wave, Tear Edge, Zipper & Stripping Rules
Bohlerstrip HTBohlerstrip HR
- Hardened and tempered- Hard rolled
- Recommended on rules 3 pt. and less.- Recommended on rules 4 pt. and greater.
A = 39 HRC
Top & Universal Cut-CreaseTop & Universal Glue FlapTop & Universal Wave Edge& Deckle Edge Rules
Top 36 Zipper Edge RulesTop 36 Stripping RulesTop 36 Sure-Strip
- 2, 3, 4 pt.- 2 pt.- 2, 3 pt.
- 2, 3 pt.- 3 pt.- 3 pt.
- Bevels: CF, CFDDB- Bevels: CF- Bevels: CF, CFDB
- Bevel: CF- Flat top- Bevel: CF
- HS - cutting part height,HR - creasing part height. - Used to prep cardboard for adhesive.- For production of safety cutting edges on corrugated.
- Tear open solution for shelf-ready packaging.- Used for ejecting waste material after diecutting.- Used for ejecting waste material after diecutting.
Creasing RuleLaser CreaseFacet Creasing Rule
Creasing RuleReverse Laser Crease
Standard Creasing RuleTapered Creasing Rule
Rotary Laser CreaseTru Fold Laser CreaseMicroTrak CreaseI-Crease
---
- Single Round (SR) or Double Round (DR).- Wider scoring edge using a 2 pt. die slot.
- HW hardness achieved through cold-rolling.-
P-Crease RuleDouble Creasing RuleHalf Crease Rule
1.5 pt. A = 45 HRC, 2 - 3 pt. A = 40 HRC, 4 - 6 pt. A = 35 HRC
Standard Creasing Rule HW -Heavy Top Creasing Rule -
Wave Score -Duo-Score -MicroTrak Laser Crease -
- MicroTrak can be added to creasing rules. --
Crease/Cutting Rulewith Flat Crease
Crease/Cutting Rulewith Round Crease
Speedi ProductsGlue Flap Rule
Combination Cut andCrease Rule
Wave RuleSteel Spacing LeadsTear Edge (Zipper) Rule
Speed Stripping RuleWaved Stripping RuleWaved Esopick RuleWaved Stripping Rulewith Perf
Zipper RuleTissue Perforating RuleStripping RuleEsopick Stripping RuleStripping Rule with Perf
- 1.5, 2, 3, 4 pt.
- 1.5, 2, 3, 4 pt.- 1, 1.5, 2, 3, 4, 6 pt.- 8” lengths, 2 pt. body
MM44 Combination Cut/Crease Rule
HW Spacing Rule HW, MM34, MM40 Stripping Rule
Combination Cut/Crease Radius Gullet Combination Cut Crease Rule
Platinum Combo ScoreBundle Breaker Rule
PERFormaX Rule8-Tooth EZ Strip Rule10-Tooth Prenick RuleTear Edge (Zipper) Rule
MM40, HP40 Wave Edge Rule
MM44 Glue Flap RuleMM34 Zipper Rule
More Steel Rule next page...
Manufacturer Product Hardness / Details Special Characteristics Product Application
Manufacturer Product Details Characteristics Product Application
Manufacturer Product Product Product
Contact us or visit www.wagnerdiesupply.com for the latest information!
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
S T E E L R U L E
6
Perforating Rule
Rotary Rule Cutting Rule
National Rotary Rule - General Coil Information:
Top Universal
Perforating RuleAsymmetrical Perf RulesSpecial-Micro Perf Rules
12 Tooth10 Tooth8 ToothEuro-Cut10 Tooth Euro-Cut12 Toto Euro-CutKleen Kut10 Tooth Kleen Kut13 Tooth Kleen KutScalloped16 Tooth20 ToothSuperCutExtreme 9Super SixArrowhead10 Tooth ArrowheadRP810 Tooth NZ Style Klean Kut13 Tooth Shallow Profile14 Tooth Shallow Profile
Perforating Rule
MM44HP40
Rotary Perforating RulePrism PerfMicro-PerfInvisible Perf
- 2, 3, 4 pt.- 2, 3, 4 pt.
- 2, 3, 4 pt.- 2, 3, 4 pt.
- Shaved edge.- Shaved bevel - Shaved bevel, “V” ground teeth- Shaved edge, edge hardened- Shaved edge, edge hardened- Shaved edge, edge hardened- Hard alloy steel, unique bevel- Hard alloy steel, shallow gullet- Edge hardened, shallow gullet- Center bevel, edge hardened- Available symmetrically ground- Edge hardened or standard- Multi-purpose, avail. in 10 tooth- Teeth slant at a downward angle- Ground from one side- Long shaved bevel, edge hardened- Symmetrical ground, hardened edge- Symmetrical ground, shallow gullet- Side bevel, shallow gullet- Radius tooth, hardened edge- Center bevel, ground on one side
- 1.5, 2, 3, 4 pt.
- Bevels: CF, CFDDB- Bevels: CF, CFDDB
- Bevels: CB- Bevels: CB, LCB, SB, ISB- Bevels: LCB
- A wide range of tooth configurations for the corru-gated, folding carton and business form industries.
- All common tooth/gap configurations available.
- Serrated perf recommended for tooth sizes above 1/4”- Alternative to serrated perf.- Used in business forms, fine perf rule.- Ultra-fine
- Minimizes dust, cuts a wide variety of materials.- Reduces edge crush, can be edge hardened.- Cuts with minimal pressure.- Cuts with reduced penetration, saves die rubber.- Minimal penetration, increases blank & anvil life.- Excellent for E Flutes and other light grade board.- Excellent for lead edge knife, or long horizontal cuts.- Low cutting pressure, good on plastic corrugated.- Excellent on plastics and micro flute corrugated.- Excellent for cutting rubber, fiber and plastics.- Excellent for displays or for a superior edge.- Good for cutting light board and micro flutes.- Creates a safety edge, provides excellent anvil life.- Cuts heavy board. For long, across the cylinder cuts.- Improves stripping and cuts with less pressure.- Reduces edge crush, perfect for power flute.- Longer anvil life,for medium to lighter board weights.- Longer production runs, excellent bendability.- Perfect for difficult scrap areas, improves anvil life.- Ideal for flat applications.- Cuts with minimal pressure, good for fabrics, rubber.
A = 45 HRC B = 35 HRC, C = 57 HRC
A = 50 - 70 HRC
A = 40 HRCB = 39 HRC, C = 67 HRC
Manufacturer Product Hardness Heights Product Application
Product Special Characteristics Product Application
12 Tooth
8 Tooth
20 Tooth
Kleen Kut
Extreme 9
Coil Ends on the
LeftCoil Ends on the
Right
Bevel is always on the outside.
Counter-Clockwise Clockwise
Reverse WoundCurved Rule
Standard WoundCurved Rule Coil Direction: ClockwiseCoil Direction: Anti-Clockwise
(or Counter-Clockwise)
DP (21” O.D.) , KX (18-3/8” O.D.)AC (21” O.D.), AB (18-3/8” O.D.)
Wagner refers to Anti-Clockwise as “AB” or “RW” for reverse wound.
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
7
D I E R O O M S U P P L I E S
Dieboard - Flat & Rotary - Flat - available in Birch & Maple;Rotary available in Maple, Mixed Core & Dura Core.Many sizes & styles available, contact us for more information.
Jig Saw Blades -For Richards, Laborsaber,Sandvik, Sabermatic andCutawl.
Router Bits - for diemakers using routers.Use Wagner ColletCare forcleaning, lubricating andprotecting spindles.
Kevlar® Gloves - Safety gloves - ideal forhandling and ruling dies.Part # Z KVD18AR
Diemaker’s Apron -Saves wear and tear onclothing, handy pocket onfront for scribes and pens.Part # Z 5256T8
Quicknick Grinders -In 110V or pneumaticversions.110 V - Part # 3115142Pneumatic - Part # 3270201
Dumore Grinder -Model #10-351 22,000 RPMmax, uses #39 mandrel.Part # Z 10-351
Dremel® 100 Series -35,000 RPM single speedgrider (Part# Z 270).Uses these grinding discs:#409 . . Z #409 G.D. #420 . . Z #420 G.D. #426 . . Z #426 G.D.
G-Lam Adhesive -Specially-formulated forlaminating two 5/16” routeddieboards. Green tint for accurate application!1 gal. Part # U G-LAM 1GL5 gal. Part # U G-LAM 5GL
Grinding Wheels - Rubber-bonded or reinforced wheels invarious thicknesses.
Nicking Chisel - Inexpensive way to nickor increase nick width,complete with three tips.020, .030 and .040.Part # 3280001
Pocket Scribes -#81 - 3/8” dia., #83 - 1/4”dia., #88 - Carbide pointwith pocket clip.
Retractable Pins -Used in blister packagingfor registration, made ofaluminum.
Registration Pins -Close tolerance retractablepins, 1/8”, 5/32”, 3/16” &1/4” sizes available, used onprogressive dies.
Contact us or visit www.wagnerdiesupply.com for the latest information!
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
8
D I E R O O M S U P P L I E S
Extractor 2000 -The safe way to pull rule,designed and manufacturedby Wagner Die Supply in theUSA (see page 16).Part # WWPULLER
Bar-Plate Rule Puller -Lifts rule as close as 1/4”apart. Part # 3390001
Pneumatic Rule Puller -The 50-0 and 50-0-HD unitspull rule using pneumaticallyoperated pins to provide lifting power. Part # 4 50-0
Channellock Pullers -7” - Part # Z PULLER 78” - Part # Z PULLER 810” - Part # Z PULLER 10
Elastomer Mallets -#4 2” dia. hd. Part # TEL4#4L 2” dia. hd. Part # TEL4L#5 2-3/4 dia. hd. Part #TEL5#6 2-3/4 dia. hd. Part #TEL6 #6L 2-3/4” dia. hd. Part #TEL6L
Urethane Mallets -#4 - 2” dia. hd. Part # T4W#2x5 - 1-7/8 dia hd. Part # T4WL#5 - 3” dia. hd. Part # T5W
Urethane Mallets -From left to right:#5 Part # T 5 PM#2x5 Part # T 25 PM#4 Part # T 4 PM #4 Part # T 4 PM W
Rawhide Mallets -#3 1-3/4” dia. hd. Part # T3RM#4 2” dia. hd. Part # T4RM#5 2-3/4” dia. hd. Part # T5RM#6 2-3/4” dia. hd. Part # T6RM#5 Long Hndl. Part # T RM275
Multi-Cutter - Cuts rubber and non-metallic matrix, with spareblades and anvil.Part # Z 480501Replacement Blades (3) &Anvil kit Part # Z314814
Red Urethane Mallets -Three styles available.#4L 2” dia. hd. Part # TRU4L#6 2-3/4” dia. hd. Part # TRU6#6* w/long handle Part # TRU6LH
Rule Setter & Tamper-Designed by Bar-Plate forworking on rule on the die. Setter - Part # 3420001Tamper - Part # 3420101
Rule Tweaker -Available in either 2, 3 or 4pt. versions from Bar-Plate.2 pt. - Part # 34202213 pt. - Part # 34202314 pt. - Part # 3117514
Super Sharpener -For spot sharpening of ruleon dies, includes safetyshield*. Part # Z SUPERSHRP
Hand Rule Cutter -Cuts 2 & 3 pt. rules.Part # Z #1290-G
* Designed for sharpening dies which cut into a cutting pad.
Corrugated Fasteners3/8” and 1/2” sizes, settingtool available.3/8” Part # Z CF-3/81/2” Part # Z CF-1/2Setting Tool - Part # Z CFHT
Air Fastener Gun -Used for installing corrugated fasteners.PART # Z SC2
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
D I E R O O M S U P P L I E S
9
Die Bolts -1/4” x 1-1/8”, 5/16” x1-1/8”, 5/16” x 1-3/8” sizesand Hamada style.
2” #89 Pinch Dogs - Holds 2 pieces of dieboardtogether temporarily.Part # Z 89PINCHDG
Speed Mount WasherExclusively designed forrotary dies, 3/8” x 5/8”.Part # Z SM ELONG
T-Nuts - Available in both standardand metric sizes.
Coil Keepers - Specially designed hook &loop fasteners that keepsteel rule coils secure. PART # Z CL/K
Rotary Hoops - Rotary hoops, double-taper design, 4 sizes.
Rotary Hoops - Precision rotary hoops forMartin® Posi-lock® System,4 sizes.
Die Matte Film -Matte/frosted on one side,.003 - .005 in a variety of rollwidths & lengths.
Carbon Paper -available in various sizes.
Rule Guards -Help maintain alignment onrotary dies.Steel - Part # Z RULEGDHDNylon - Part # Z RULEGUARD
4-Way Hardware -Adjustable slot for 2” to3” hole spacing, 1/4” and5/16” widths available.
Type Perf - 3/4”, 1/2” or 3/8” tall type available, with manystyles of tracks for each size. Characters include the upper casealphabet, numbers 0-9, slash and recycled logo.
LeGard -Lead edge knife brace for rotary dies, reduces lead knifefailure. 100 Le Gards per bag.Standard for rule up to 1-1/8” tall
Part # Q LEGARDJumbo for rule over 1-1/8 tallPart # Q LEGARD-J
Low for 3/8” thick dieboardPart # Q LEGARD-L
BridgeSavers™ -BridgeSaver™ added to therule near the join line enhances rule grip & die life.100 BridgeSavers™ per bag.Part # Q BRIDGE
Shoulder Flex 2 -Surface mounted, helps corrugated from cracking..350 Blue 50’ Part # Z SF35050.375 Orange 50’ Part # Z SF37550
Large = 3/4”*
Medium = 1/2”*
Small = 3/8”*
* Height of Perfed Characters.
Parts for EVOL Dies -Wagner can supply parts andcomponents for EVOL dies.
We’re your Source and Resource, always working to improve our product line, and you can help! If you don’t see something you need, contact us, let us know about it and we’ll do our best to locate it for you.
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
10
D I E R O O M S U P P L I E S
Stripping Pins - 50 mm long, flat, singlepoint and multi-point.
Stripping Claws - Right and left versions, invarious widths, 50 mm inlength.
Spring Pins -In various widths andlengths, used as strippingpins.
Inca Nails - 50 mm long stripping pins.500 per box. Part # 0 STP-2
Female Clamping JawsMade from Nylon, includes installation screws.Part # 0 BOBST CCJ
Easi-Blank Joggers -Designed for universal use.
Blanking Easi-Foam -Ideal for the male blankingtool.
Distance Spacers -Used in stripping andblanking tooling, varioussizes and styles.
Trim Breakers - Universal, right or leftin a variety of sizes and styles.
Easi-Blank System -Assembled frame kit withjoggers.
Easi-Blank Frame Kit -Designed for Bobst and Iberica blanker presses.
Stackers -3/16” and 5/16” with screws.
Centerline - Storage Bolts and Nuts (blue, orange, yellow, black) 43 mm. - 50 mm., Unthreaded T-Nut, Black & Red Centerline Pieces.
Upper & Lower Stripping Pins - Andsupporting assemblies including all brackets, pinsnuts and bolts. Availableas an assembly, or by indi-vidual parts.
Contact us or visit www.wagnerdiesupply.com for the latest information!
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
11
E J E C T I O N M AT E R I A L S
Monroe Ejection Materials 12000 & 22000
Green G’rilla™ Red Rhino™ MR75 BK85
From left to right: Ejecto-Flex, MR Point, MR Wave and Side Wave.Available in wide range of styles including Green G’rilla, Red Rhino,MR75 and other Monroe materials.
12000 Series of Closed Cell ejectionmaterial is consistent and durable,22000 is an upgraded version. Both are available in black, gray, red, tan, orange and blue.
MR 1100
Monroe’s MR1100 microcell rubberoutperforms conventional open cellrubber in compression, ejectionspeed and durability. Available insheets, strips and blocks.
Green G’rilla and Red Rhino shown in “Groovy” slot rubber.
Contact us or visit www.wagnerdiesupply.com for the latest information!
More Ejection Materials next page!
Monroe Profiles
MR75 is a microcellular polymer without the drawbacks of old standard 75 rubber.
Firm microcell material with a durometer rating of 83-90 &40-50.
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
KO-19KO-30
KO-4 KO-10
KO-3
KO-1
KO-2G
KO-11 KO-18
KO-2
B
Kodiak Open CellKodiak Ejection Materials
Kodiak ProfilesKodiak Closed Cell & MicrocellFrom left to right: Blue Frontier, KO-15 (closed cell),Red Grizz, Green Grizz and KO-20T. Available insheets, strips and shapes in a wide variety of heights.
Available in a wide range of heights, in sheets, strips andshapes.
From left to right: Kodiak Trap Cut, BearClaw and Side Wave profiles. Profiles
available in open and closed cell styles.
12
E J E C T I O N M AT E R I A L S
Stripping Foam -Gray 6#, White 2#.
Blue Slot Rubba - Available in several thicknesses.
SuperSet Gel - High Viscosity gel-formversion of SuperSet, intubes and cartridges.
Multi-Cutter -Perfect for cutting strips,includes spare blades.Part # Z 480501, 3 Blades &Anvil kit Part # Z314814
Grip N’ Strip - Holds tight and strips clean, water-based, in 1 qt., & 1 gal.
SuperSet - Ideal for non-porous rubber available in 1lb. and 1 oz. bottles, in low,medium and high viscosities.
SuperSet QT2 -Accelerant for use withSuperSet LV, MV and HV,and swab applicator.
D-Profile Rubber - Helps hold sheets togetherin high speed diecutting,reduces nicks needed in die.
Kushion Crease -For rotary dies, reduces fractured scores.
C-Profile Rubber -60 Durometer, white non-marking. Other profiles & materials available.
Dura Strip & VulcanSheets -Premium slot rubber.
ReelStrip™ - Vulcan slotrubber in coils, 1/4”, 5/16” &3/8” heights, in variouswidths and roll lengths.
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
Wagner Die Supply open cell die ejection materials.
Wagner Die Supply offers a wide variety of ejection materials in both closed and open cell styles, from the industry’s leading sources.
Wagner offers a family of open cell materials in strips, blocks and sheets in various thicknesses withand without PSA. Di-Wave and Di-Point profiles arealso available.
Check our website at:http://www.wagnerdiesupply.com/ejectionmaterials.html
Contact us or visit www.wagnerdiesupply.com for sizes and detailed information!
Black 65 Red 70 Red 75
13
C R E A S I N G M AT R I X
Plastrix™ - Film-based Synthetic matrix.
Pink® -Fibrous Matrix
Countamax -Phenolic-basedMatrix
Corrugate -Matrix for designed for Corrugated.
Multi-cutter - Cuts non-metallic matrix,includes spare blades.Part # Z 480501
CCM Bench MiterPress. Part # SCCM BENCH
Bobst Metrix - Metal Based Matrix.
Bobst Corrugate - Specially-designed for creasing corrugated.
Bobst Fibrix - and Fibrix Pro PressboardMatrix.
CCM Matrix Miter Plier -Cuts miter on all matrix.Part # S 703700
Dolphin Cutter -Performs easy angle cutson matrix or rubber.Part # 3115433
Bobst Syntrix - All Plastic Matrix.
Bobst Super Cut -Model 3 bench miter press.Part # S313027
Marathon™ - Vulcanized Fiberboard Matrix.
Creasing Matrix
Channel® -Original Metal-based Matrix
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
14
D I E C U T T I N G & M A K E R E A D Y
Phenolic material is available in flexible orrigid styles, .017 to .049 thick, in 39” x 39”or 42” x 42” sheets, some sizes availablewith P.S.A.
Counterplate Locating Rings and Spacers allow accurate location of thePhenolic Counter onto the Thin Plate.Pins available in aluminum & plastic inwhite, black or transparent purple.
Cutting Jackets -For Miehle, Miller,Heidelberg and manyother presses .
Cutting & Back UpPlates - 47 - 52 RC Hard-ened for Bobst, Brausse,Kluge, Heidelberg, Thompsonand many others.
Wagner PlateWipes -Micro-Fiber towels forcleaning cutting plates,jackets, and thin plates.Available in 12-packs.
Chase Plates - Chase plates & ProtectionPlates from Bar-Plate fora variety of Bobst presses.
Cutting Plate Cleaner - Quick, residue-free cleaning.8 oz. Spray Part # Z 111-8 OZ16 oz. Spray Part # Z 222-16OZ1 gal. Part # Z 116-1GAL5 gal. Part # Z 116-5GAL
Double Face Tape -1”, 2”, 6” and 12” Wide Rolls.1” . . Part # Z MR1.0 DF2” . . Part # Z MR2.0 DF6” . . Part # Z MR6.0 DF12” . Part # Z MR12.0 DF
Profitape® -Blue: .001”, Red: .002”and Yellow: .003” in 1/4”(6mm) width. Dispenser isalso available.
Fit Tape -.0015 x 5/16” steel shimtape in 33’ rolls, self-adhesive. Part # SFIT SHIM
Shim Tapes -.002 and .005 in 33’ or 100’rolls, made from stainlesssteel, self-adhesive.
Makeready Tapes& Dispenser -1/4” or 1/2” wipe tape in.0015, .003 or .006 thicknesses.
Tympan Paper -Avail-able in sheets or rolls,used for makereadysheets.
Makeready Patch-upPaper - Available in rollsin a variety of widths andlengths. Moisture and tearresistant.
Thin Plates & Phenolic MaterialCounterplate Locating Pins & Pin Spacers
Thin Plates are available in soft, mediumand hard. Excellent for use with routed Phenolic counters or with matrix to help reduce makeready time on recurring runs.Thin Plate technology can be adapted to suit most autoplaten presses.
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
15
Air Stripping HammerQuickly strips and separateswaste from diecut parts, accessories also available.Part # 3311000
Air Tool Balancer -Supports tools weighing5 to 20 lbs. Part # 3311073
Stripping Hammer -For stripping waste andtrim by hand.Part # T #2 HAMMER
Powerlock Quoin -Compact, great for secur-ing rule sections that areregularly replaced.Part # Z PWRLOCK
Wagner Grabber -The safe way to remove scrap and debris from thestripping end of the press!2 sizes, 36” and 51” lengths.36” Part # Z GRABBER51” Part # Z GRABBER51
G&R Stop Guides -For use on clam shell typepresses when cuttingcorrugated material.
Adjusto Guides -Available in 2” x 2” or2” x 1” versions.2” x 2”Part # 34800712” x 1” Part # 3480070
Quoins & Keys - Quoins are available in3”, 6”, 9” and 12” lengths.
Torque Key -Prevents damage to quoinsfrom over-tightening.Part # 3330104. Replace-ment shank Part # 3330105
Mini Quoin & Hex Key -2” long, 5/8” tall, features a 6mm hex locking mechanism.Mini Quoin Part # Z315023T-Handle Key Part # Z315024
Steel Stop Pins -Precision ground to help protect steel rule dies fromdamage.
Wagner can supply OEM parts and supplies for Bobst autoplaten presses:
• Thin Plates• Stripping & Blanking As well as components
for Martin Rotary presses like DRO hoops.
D I E C U T T I N G & M A K E R E A D Y
Toggle Hooks - Used to hold embossing and foilstamping dies onto honey-comb chase plate.
Wagner also carries:• Skiveready knives• Score cutters• Sample-making tools• Counterboard
Contact us or visit www.wagnerdiesupply.com for the latest information!
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
Press Suckers -Available for diecutting andprinting presses of allmakes.
16
D I E R O O M E Q U I P M E N T
For over 20 years, Wagner’s Extractor 2000has led the way in safe rule pulling. Extractors pull rule straight up, with up to600 lbs. of reliable pulling power! Keepsknuckles safely away from sharp rule edges!
ONLY Wagner Extractor 2000 features:
• Quality USA-Designed & Manufactured components
• Improved jaw locating system
• A full set of pins for easy configuration
• A set of Urethane pads for use on complex die layouts
• A handy caddy to store pads & pins
• Replaceable jaws - in standard and narrow versions
StandardJaws
NarrowJaws
Wagner Extractor 2000: The True Blue Original is Still the Best!
Helmold E-Z Bendall -Also available in Standard,Heavy Duty models.Part # X114917
Helmold Cutter -Models are available forcutting rule up to 1-1/2”, 2-1/8” or 2-7/8” in height.
Rotary Miter Knives -for 1-1/2” model Helmold Cutter.Part # Z ROT KNI B
Replacement Blades &Knives - Helmold cutters,notchers & miters. Wagner canprovide sharpening or retipping.
Helmold StandardNotcher - Many notchsizes available.
Helmold Miter - Single miter or right andleft hand miter.
Helmold Heavy Duty -2 & 4-hole Notchers, alsoavailable in E-Z model, re-placement blades available.
Helmold Cutawl Saw -for Flat and Rotarydieboards. Blades also available, see page 7.
Curver/Flattener Tool -for rotary rule.Part # 4 3466
Wagner Extractor 2000 - with Pins, Urethane Pads & Caddy.
Wagner Knifing Table -Feature rugged constructionwith a 48” x 48” specially-ground top. Part # W48X48WT
Wagner work bench -With MDF counters readyfor equipment & peg boardbacker for tool organization.
Wagner KnifingTables and Work Benches are in limited supply, please contact us for availability!
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
Part # WWPULLER
17
H E N D E R S O N S T O R A G E S Y S T E M S
Storage Systems -For 5/8” and 3/4” dieboards,stripping and blanking tooling.
Easi-Hanger Blanking System Hanger Brackets.
Rotary Die Storage System and Rotary Transfer Cart
Mounted and UnmountedPrinting Plate Storage -Hooks are also available separately.
Litho Plate Storage -Hooks are also available separately.
Flat Die Storage Pins -1/8” pin for 5/8” wood, 3/16” pin for3/4” wood.
Rotary Die Storage - For DRO Rotary Dies.
Rotary Die Storage - For EVOLRotary Dies.
Printing Plate Transfer Cart Ink Storage Units
Flat Die Transfer Cart
Custom Storage Systems can also be designed and manufactured upon request.
www.wagnerdiesupply.comO N T A R I O , C A • D A L L A S , T X • E L M H U R S T , I L
2041 Elm Court, Ontario, CA 91761
Toll-Free (800) 423-4478(909) 947-3044 • Fax: (909) 923-7809
Toll-Free Fax Ordering: (866) 786-2437
2532 Converse Street, Dallas, TX 75207Toll-Free (800) 262-4695(214) 630-4695 • Fax: (214) 630-5425
Toll-Free Fax Ordering: (800) 446-6651
960 Industrial Drive, Unit 8, Elmhurst, IL 60126Toll-Free (800) 334-7914(630) 782-6230 • Fax: (630) 782-6220
Toll-Free Fax Ordering: (800) 554-9124
P-U-N-C-H-E-S
W E S T C O A S T
S O U T H W E S T
M I D W E S T
www.wagnerdiesupply.com
America’s Die Supply leader.Celebrating over 7 decades of service.
For the latest information and updates, visit our website at:
© 2018 - Wagner Die Supply - WDS-C-052418-Rev. 3
Email us for information and orders: [email protected]
Contact us at any of our convenient locations: