SUPPORTING ARMATURE - Aiz ARM.pdf · GOST 839-80 cable by GOST 3062-80, 3063-80, 3064-80 wire mark...

SUPPORTING ARMATURE

NOMINATION:

To attach conductors and ground wires to insulator strings.Clamps PG-1-11, PG-2-10, PG-3-10 meet TU 34.13.10117-89,

clamps PG-2-11B, PG-2-11D meet

TU 34.13.10029-90, clampsPG-3-12 - TU 34.13.11467-89.

PG-1-11, PG-3-10

PG-2-11D

PG-2-10

SUSPENSION DEAD END CLAMP TYPE PG CLAMP PG

45

AIZ - registered trademark of enterprises "Insulators and accessories factory"R

AIZ, LitkarinoAIZ, Tula AIZ, Belarus AIZ, Kazakhstan AIZ, Lithuania

www.insulators.ruwww.taiz.ruwww.aiz.bywww.aiz.kzwww.bus-bar.eu

[email protected]@[email protected]@[email protected]

+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

NOMINATION:

To attach conductors and ground wires to insulator strings.

Clamps PG-1-11, PG-2-10, PG-3-10 meet TU 34.13.10117-89, clamps PG-2-11B, PG-2-11D meet

TU 34.13.10029-90, clampsPG-3-12 - TU 34.13.11467-89.

PG-3-12

PG-2-11A

Designation

Diameter, mm Dimensions, mm

We

igh

t,

kg

Bre

akin

g lo

ad

, kN

(ts

),

min

imu

m

wires by GOST

839-80

cable byGOST

3062-80,3063-80,3064-80

wire mark PS

by TU 14-4-661-75

L H A d

PG-1-11 - 11,0 - 13,0 - 240 112 17 16 3,7 60 (6)

PG-2-10 - 8,0 - 13,0 - 240 17 - - 1,94 30 (3)

PG-3-10 15,4 - 19,8 21,5 - 300 128 23 22 5,0 60 (6)

PG-2-11A 6,9 - 8,4 8,0-9,8 6,8 - 9,2 192 89 - - 0,9 25 (2,5)

PG B-2-11 9,6 - 11,4 11,0-11,5 11,5 192 89 - - 0,9 25 (2,5)

PG D-2-11 - 7,8 - 11,0 6,8 - 9,2 190 89 - - 0,94 25 (2,5)

PG-3-12 13,5 - 19,6 - - 220 100 - - 1,35 29,4 (3)

SUSPENSION DEAD END CLAMP TYPE PG CLAMP PG

46




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925


NOMINATION:

For fastening aluminum, aluminum-steel and copper wires.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

SUSPENSION DEAD END CLAMP TYPE PGN CLAMP PGN

47





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

NOMINATION:

For fastening aluminum,

aluminum-steel and copper wires.

Designation of gasket

Mark conductors cross section,

mm2 Diameter of wire, mm

A, AKP AS, ASKS, ASKP, ASK

A 650 550/71, 600/72 32,4 - 33,2

B 600 - 31,5

V 550 500/64 30,3 - 30,6

G 500450/56, 500/27, 400/93, 300/204

28,8 - 29,4

D 450 400/22, 400/51, 400/64 26,6 - 27,7

Å 400 330/43 25,2 - 25,6

Z 350300/39, 330/30, 300/48,

300/66, 185/12823,1 - 24,8

K 300 240/32, 240/39, 240/56 21,6 - 22,4

GASKET OF WIRES FOR CLAMP

TYPE PGN

NOMINATION:

Depending on the type of wire-mounted terminals such

as PGN (PGN-5-3, PGN-5-3V, PGN-5-4, PGN-5-6, PGN-5-6V,

PGN-5-7), special gasket is put on the conductor.

Designation of gaskets for wires is provided in the table.

Designation Fig.Dimensions, mm

Diameter of wire, mm

Meet TU requirements

Weight, kg

Breaking load, kN (ts),

minimumL H H1

A d

PGN-1-5 1 192 55 94 17 16 6,4 - 9,2

34.13.10029-90

0,71 25 (2,5)

PGN-2-6 1 192 55 93 17 16 9,6 - 12,6 0,71 25 (2,5)

PGN-2-6A 2 190 55 136 17 16 6,8 - 10,5 0,94 25 (2,5)

PGN-3-5 1 220 67 111 20 16 13,5 - 19,6 1,10 29,4 (3)

PGN-5-3 4 300 158 188 - - 21,6 - 33,2 5,30 60 (6)

PGN V-5-3 4 300 137 167 - - 21,6 - 33,2 5,07 60 (6)

PGN-5-4 4 300 162 196 - - 21,6 - 33,2 7,00 100 (10)

PGN-5-6 3 300 38 243 - - 21,6 - 33,2 5,10 60 (6)

PGN V-5-6 3 300 38 243 - - 21,6 - 33,2 5,00 60 (6)

PGN-5-7 3 300 58 263 - - 21,6 - 33,2 6,00 60 (6)

PGN-6-5 4 300 166 196 - - 34,5 - 37,5 6,85 100 (10)

PGN-6-6 3 300 54 243 - - 37,5; 33,9 5,80 100 (10)

PGN-6-9 4 300 187 223 - - 59

34.13.10310-90

6,20 60 (6)

PGN-8-6 5 500 161 259,5 - - 45 7,30 80 (8)

PGN-8-6A 5 500 161 214,5 - - 45 6,81 39,24 (4)

PGN-8-7 3 300 51 272 - - 45 - 46,534.13.10029-90

6,10 120 (12)

PGN-8-8 4 300 177 216,5 - - 45 - 46,5 7,30 120 (12)

SUSPENSION DEAD END CLAMPS TYPE PGN CLAMP PGN

48




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925


2PGN-5-1

NOMINATION:

For fastening two aluminum and aluminum-steel wires in the phase.

SUSPENSION DEAD END CLAMPS TYPE 2PGNCLAMP 2PGN

2PGN-5-7, 2PGN-5-7B

49





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

NOMINATION:

For fastening two aluminum, aluminum-steel phase conductors

to suspension.

2PGN-5-10

DesignationDiameter of aluminum

and steel-aluminum wires, mm Meet requirements

of TUWeight,

kg


minimum

2PGN-5-1 21,6 - 30,6 34 13.10700-91 4,25 58,86 (6)

2 -5-7PGN 21,6 - 33,2 34 13.10700-91 17,8 180 (18)

2 -5-7PGN V 21,6 - 33,2 34 13.10700-91 17,4 180 (18)

2 -5-10PGN 21,6 - 33,2 34 13.11081-92 26,3 300 (30)

SUSPENSION DEAD END CLAMPS TYPE 2PGN 2PGN

50




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925


8PGN-5-5

8PGN2-5-20

NOMINATION:

For eight steel-aluminum wires in

phase of VL 1150 kV dead fastening with one, two and four attachment points.

SUSPENSION DEAD END CLAMPS TYPE 8PGN2, 8PGN4CLAMP 8PGN

51





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

8PGN2-5-21

8PGN4-5-1

NOMINATION:

For eight steel-aluminum

wires in phase of VL 1150 kV

dead fastening with one, two and four attachment points.

Designation Diameter of aluminum and steel-aluminum wires, mm

Meets requirements

Weight, kg


minimum

8PGN-5-5 21,6 GOST R 51177-98 94 210 (21)

8 2-5-20PGN 24,1 - 25,2 TU 34 13.10498-89 115 480 (48)

8 2-5-21PGN 25,2 - 27,5 TU 34 13.10498-89 148 750 (75)

8 4-5-1PGN 24,1 - 25,2 TU 34 13.10498-89 124 480 (48)

SUSPENSION DEAD END CLAMPS TYPE 8PGN2, 8PGN4 8PGN2, 8PGN4

52




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925


NOMINATION:

For supporting attachment of wires to the intermediate - corner towers. Allows us to simplify installationof wires without relaying. Clamps meet TU 34 13.10284.

SUSPENSION DEAD END CLAMPS TYPE PGU

PGU-2-1

PGU-2-2, PGU-2-3


and steel-aluminum wires, mm

Dimensions, mm Weight,kg


minimumB d H

PGU-2-1 8,4 - 21,6 - - - 3,44 50 (5)

PGU-2-2 8,4 - 15,4 17 16 67 1,88 60 (6)

PGU-2-3 12,3 - 21,3 23 22 77 2,8 120 (12)

CLAMPS PGU

53





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

NOMINATION:

For plum made of aluminum, steel-aluminum

and hollow wires to anchor - corner towers stroke.

Spacers meet TU 34 13.11050-90.

RS-2/3-400

RS-2/3-400A

3RS-2/4-400

SPACERS SPECIAL FOR PLUMS STROKE SPACERS RS, 3RS

54




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925


ECIE?OI?U SPACERS SPECIAL FOR PLUMS STROKE

NOMINATION:

For plum made ofaluminum, steel-aluminumand hollow wires to anchor - corner towers stroke. Spacers meet TU 34 13.11050-90.

3RS-4-600

8RS-3-400 (A)

Designation Diameter of wires, mmWeight,

kg

RS-2-400 21,6 - 26,6 54,36

RS-3-400 27,5 - 30,6 54,36

RS-2-400A 21,6 - 26,6 32,4

RS-3-400A 27,5 - 30,6 32,4

3 -2-400RS 21,6 - 26,6 80,36

3 -3-400RS 27,5 - 30,6 80,36

3 -4-400RS 31,5 - 37,7 80,26

3 -4-600RS 37,5 83,7

8 -3-400RS 27,5 - 30,6 209

8 -3-400ARS 27,5 - 30,6 264

SPACERS RS

55





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

RS-6-400

2RS-4-2

3RS-5-400

4RS-3-400, 4RS-3-600,

4RS-4-600, 4RS-2/3-925A

NOMINATION:

For fixing tube of

diameter 48 and 88 mm to wires.

SPACERS SPECIAL FOR STRETCH SUSPENSION SPACERS RS

56




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925


ECIE?OI?U

NOMINATION:

For fixing tube ofdiameter 48 and 88 mm to wires.

SPACERS SPECIAL FOR STRETCH SUSPENSION

4RS-400-1

6RS-5-400

SPACERS RS

57





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

SPACERS SPECIAL FOR STRETCH SUSPENSION

NOMINATION:

For fixing tube ofdiameter 48 and 88 mm

to wires.

5RS-5-1A

5RS-3-400, 5RS-2/3-450A

DesignationDiameter

of wires, mm

Dimensions, mm

Meet requirements Weight,

kgD d L

RS-6-400 59/51,5 - 58 400 TU 34 13.11050-90 3,84

2 -4-2RS 37,5 - 36 600 TU 34 13.11050-90 3,17

3 -5-400RS 45 - 44 400 TU 34 13.11050-90 3,3

4 -3-400RS 27,5 - 30,6

-

30 600 TU 34 13.11050-90 6,0

4 -3-600RS 31,5 - 37,5 36 600 TU 34 13.11050-90 6,0

4 -4-600RS 27,5 - 30,6 30 400 TU 34 13.11050-90 4,73

4 -2-925ARS 21,6 - 26,6 25 925 TU 34 13.10805-92 8,63

4 -3-925ARS 27,5 - 30,6 30 925 TU 34 13.10805-92 8,55

4 -400-1RS 59/51,5 - 58 400 TU 34 13.11050-90 7,44

5 -3-400RS 27,5 - 30,6 680 30 400 TU 34 13.11050-90 7,6

5 -2-450ARS 22,4 - 24,0 765 25 450 TU 34 13.10805-92 8,38

5 -3-450ARS 27,5 - 331,0 765 30 450 TU 34 13.10805-92 8,28

5 -5-1ARS 42,6 - 46,5 1020 46 600TU 34 13.10805-92 GOST R

51177-9810,17

6RS-5-400 45/37 800 46 400 28,0

SPACERS RS

58




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925


NOMINATION:

To trace the plumes of isolating suspensions on power lines.Spacers meet TU 34 13.10805-92.

Spacers

SPACERS SPECIAL FOR MOUNTING SCREEN

Designation Diameter of wiresWeight,

kg

3RS-2-3A 21,6 - 26,6 3,54

3RS-3-3A 27,5 - 30,6 3,54

SPACERS 3RS

59





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

NOMINATION:

For maintaining

three steel-aluminum conductors per phase.

3PGN-5-1

3PGN-5-12

3PGN-5-1,3PGN-5-12SUSPENSION CLAMPS DEAD END TYPE 3PGN-5-1, 3PGN-5-12

60




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925




of TUWeight,

kg

Breaking load,kN (ts),

minimum

3PGN-5-1 30,6 34 13.10700-91 4,65 30 (3)

3PGN-5-7 21,6 - 33,2 34 13.10700-91 23,5 180 (18)

3PGN-5-7Â 21,6 - 33,2 34 13.10700-91 23,1 180 (18)

3PGN-5-12 21,6 - 33,2 34 13.11081-92 34,3 300 (30)

3PGN-6-3 37,5 34 13.10407-90 34,2 300 (30)

NOMINATION:

For maintaining three steel-aluminum conductors per phase.

3PGN-5-7, 3PGN-5-7V

3PGN-6-3

SUSPENSION CLAMPS DEAD END TYPE 3PGNCLAMPS 3PGN

61





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

NOMINATION:

For maintaining three aluminum and

steel-aluminum wires per phase with two attachment points.

3PGN2-5-1

3PGN2-8-1

3PGN-2-5-4,3PGN2-8-1SUSPENSION CLAMPS DEAD END TYPE 3PGN2-5-4, 3PGN2-8-1

62




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925




of TU

Weight,kg

Breaking load,kN (ts),

minimum

3PGN2-5-1 21,6 - 33,2 34 13.10407-90 61,5 300 (30)

3 2-5-4PGN 21,6 - 33,2 34 13.10700-91 41,5 300 (30)

3 2-6-3PGN 37,5 34 13.10407-90 42,9 300 (30)

3 2-8-1PGN 45/37 34 13.11081-92 33,8 240 (24)

NOMINATION:

For maintaining three aluminum and steel-aluminum wires per phase with two attachment points.

3PGN2-5-4

3PGN2-6-3

ééééééé

SUSPENSION CLAMPS DEAD END TYPE 3PGN2CLAMPS 3PGN2

63





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

SUSPENSION CLAMPS DEAD END TYPE 4PGN, 4PGN2

NOMINATION:

For dead end maintaining

four aluminum and

steel-aluminum wires per phase with one or two attachment points.

4PGN-5-2A

4PGN2-5-2A

4PGN, 4PGN2

64




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925


Designation Diameter of aluminum and steel-aluminum wires, mm

Meet requirementsof TU

Weight,kg


minimum

4PGN-5-2A 21,6 - 13,0 TU 34 13.10700-91 50 300 (30)

4 2-5-2APGN 21,6 - 33,2 TU 34 13.10700-91 63,0 300 (30)

4 2-8-2PGN 45/37 GOST R 51177-98 41,33 157,0 (16)

NOMINATION:

For dead end maintaining four aluminum and steel-aluminum wires per phase with one or two attachment points.

4PGN2-8-2

SUSPENSION CLAMPS DEAD END TYPE 4PGN, 4PGN24PGN, 4PGN2

65





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

SUSPENSION CLAMPS DEAD END TYPE 5PGN, 5PGN2

NOMINATION:

For dead end maintaining five aluminum and

steel-aluminum wires per phase with one or two attachment points.

5 -5-8PGN

5 -5-8PGN

5PGN,5PGN2

66




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925


ECIE?OI?U



of TUWeight,

kg


minimum

5PGN-5-8 21,6 - 33,2

34 13.11081-92

44 300 (30)

5 2-5-8PGN 21,6 - 33,2 59,4 300 (30)

5 2-6-2PGN 37,5 79,2 210 (21)

NOMINATION:

For dead end maintaining five aluminum and steel-aluminum wires per phase with one or two attachment points.

5PGN2-6-2

SUSPENSION CLAMPS DEAD END TYPE 5PGN, 5PGN25PGN, 5PGN2

67





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

MULTIROLLERSUSPENSIONS

ECIE?OI?U

Designation

Diameter of wires

minimum

Dimensions, mmBreaking load,

kN (ts),

TU 34-27-12578-83.

Weight, kgSteel-

aluminumwire

Steel channels

GOST 3063D L R

P4R-12-1 11,5 - 18,5 11,5 - 18,5 20 1520 11,5 120 87

P4R-25-1 11,5 - 18,5 11,5 - 18,5 26 1520 17 250 111

P6R-30-1 24,1 - 37,5 23,5 - 27,0 28 2240 19 300 203

P6R-45-1 24,1 - 37,5 23,5 - 27,0 34 2240 21 450 224

P4R-12-1, P4R-25-1

P6R-30-1, P6R-40-1

NOMINATION:

Used to support steel wire ropes, steel-aluminum, bronze and steel-bronze conductors on suspension towers between long spans, greatly varying in length. Suspensions meet

MULTIROLLER SUPPORTING SUSPENSION TYPE P4R, P6R P4R, P6R

69





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

NOMINATION:

Used to support steel

wire ropes, steel-aluminum, bronze and steel-bronze

conductors on suspension towers between long spans, greatly

varying in length. Suspensions meet

TU 34-27-12578-83.

2P6R-30-1

2P6R-30-2A

3P6R-30-1

2P6R, 3P6RMULTIROLLER SUPPORTING SUSPENSION TYPE P4R, P6R

70




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925


MULTIROLLER SUPPORTING SUSPENSION TYPE 4P6R, 5P6R

3P6R-30-2A

3P6R-30-3

4P6R-90-2

3P6R, 4P6R

TU 34-27-12578-83.

NOMINATION:


71





+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925

4P6R-90-3

5P6R-150-1

MULTIROLLER SUPPORTING SUSPENSION TYPE 4P6R, 5P6R

Designation

Diameter of wires

LBreaking load,

kN (ts),minimum

Weight,kgSteel-

aluminumwire

Steel channels GOST 3063

2P6R-30-1 24,1 - 37,5 23,5 - 27,0 2240 420 489,0

2P6R-30-2A 24,1 - 37,5 23,5 - 27,0 2240 660 510,0

3P6R-30-1 24,1 - 37,5 23,5 - 31,0 2240 420 703,8

3P6R-30-2A 24,1 - 37,5 23,5 - 27,0 2240 900 725,7

3P6R-30-3 24,1 - 37,5 23,5 - 31,0 5040 1320 1594,2

4P6R-90-2 24,0 23,5 - 31,0 4500 900 1570,0

4P6R-90-3 24,0 - 37,5 23,5 - 31,0 5040 1320 1778,5

5P6R-150-1 37,5 - 4640 1500 2540,0

4P6R, 5P6R

TU 34-27-12578-83.

NOMINATION:


72




+7-495-7412286+7-4872-316844+375-222455264+7725-2-561716+370-62749925


Date post:	04-Jul-2020
Category:	Documents
Upload:	others
View:	4 times
Download:	0 times

SUPPORTING ARMATURE - Aiz ARM.pdf · GOST 839-80 cable by GOST 3062-80, 3063-80, 3064-80 wire mark...

Documents