Surface repair equipment for auto/car/motor-SYLVAN

BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTDTEL: 86-10-56292661-10 86-10-56292661-16

ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO

AUTO SURFACE REPAIR EQUIPMENT SERIES

1. Raised floor with paint-stop filters, 300mm high metal basement, with outside ramps2. Raised floor with paint-stop filters, 300mm high metal basement, with inside ramps3. Base down into pit, 300mm high metal basement with paint-stop filters, without ramps4. Two rows of grilles with paint-stop filters, exhaust air from pit, without ramps5. Without basement, exhaust air from wall panels with holes, without ramps

Customization: Booth of every size, to meet every need

ApplicationSpecialize in manufacturing single or double wall spray booths and metal enclosures for Automotive, Truck / Fleet or Industrial applications;

FeaturesProvide solutions that deliver energy-savings, higher productivity, and enhanced performance and, ultimately, increased profitability for our customers;

CustomizationThe dimension and functions could be designed according to clients’ special requirementsThe inherent design flexibility and in-house manufacture allows any booth to be tailored to suit individual dimension and performance requirements;

ServicesFull installation, maintenance programs, and technical support service proves successful in helping our clients unite their shop needs and comply with the high standards of environmental and air quality requirements;

We supply 3 standard models for garages and workshops:Deluxe model SF0101Middle model SF0102 Common model SF0103

INTRODUCTION OF SYLVAN SPRAY BOOTH

Items NotesDimension Design accordingly

Position of Power System**RightLeftRear

FloorCheckered plate+GratingGratingHDG Grating

Basement** Optional

Wall FillerEPS insulation boardRockwall Insulated PanelPU board (optional)

Wall Plate (color plate)

0.426mm0.476mm0.526mm0.900mm1.000mm

Voltage100~240V/1 phase200~380V/3 phase

Root Light Optional: add root lights on the inwallWaterborne Paints update spray booth for waterborne paints Anti-explosion Fan OptionalAnti-explosion Motor Optional

Environmental CabinetWater Curtain CabinetActive Carbon

Control SystemCommonFrequency converting control (touch screen)

**Power system position

**Basement type

Power system can be installed on left, right and rear side. We can also design steel structure sheds for protection against rain and wind

We supply customized spray booth for all industries:




AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

SSPRAY BOOTH

SF0101

DELUXE MODEL SF0101



AUTO SURFACE REPAIR EQUIPMENT SERIESSPRAY BOOTH

(1)Floor Grating(2) Bottom Filters(3) Supporting Filter Frame(4) Light Fixtures(5) Ceiling Filters(6) Control Cabinet(7) Direct Fired Gas Burner(8) Circulating Damper(9) Intake Filter(10) Intake Fan(11) Exhaust Filter(12) Exhaust Fan(13) Mechanical Temperature Sensor(14) Pneumatic Device(15) Enhanced Curing System(16) Intake Air Duct(17) Exhaust Air Duct(18) Main Door(19) Personnel Door(20) Manometer

Total equipment dimension (mm ) External dimension(mm) Internal dimension (mm) Front door dimension (mm) Power(KW)

8050*5250*6500 7050*3950*3450 6920*3820*2600 3030*2600 19KW

Booth cabin

Sandwich style compound construction, thickness of wall panel 60mm, color of wall panel white.Upper plate is good galvanized steel plate.Both outside and inside door panel made by color steel plates, (Patent NO. 1037680)Safety door made by heat preservation panels.Special aluminum alloy column corners. (Patent NO. 1037680)The basement with 300mm high is made by steel plates and enhanced metal frame5 rows of galvanized floor gridsNew ramps with external (full galvanized plates)and internal slope(inclined grids)Upper net is spring cotter type (Patent NO. 1041687), it is convenient to maintain and installment.It is unique, beauty appearance, Patent NO. zl033677042) sealing performance is good (Patent NO. 1037685).

Intake and exhaust fan system

Back upper intake air 17.5KW intake fan and 17.5KW exhaust fan, direct drive centrifugal fan unit, both intake and exhaust room made by aluminum alloy frame, inner covered with galvanized sheets, outer covered color coated plate. It is heat preservation noise reduction beauty and durable.Intake and exhaust fan tube is with galvanized steel sheets made up of flanges.No-load air volume 0.25m/sAir damper by cylinder control.Exhaust tube stop return air device (Patent NO.1038055)

Filter system

Intake air filter is high efficiency ceiling filter the primary filter can effectively capture the dust particles over 10m.The primary intake filter can effectively capture the dust particles over 5m.Exhaust filter below rows is high efficiency fiberglass filter (Patent NO1037997)Equipped with different pressure gauge

Heating system

Italy Riello burner, heating capacity 180000kcat/hStainless steel heat exchanger. Argon arc welding.Equipped with mechanical temperature controller.Left heat recovery device. (cold area can use)

LightingUpper ceiling light 430W 8 unitsSide light 430W 6 units, aluminum alloy frame, with safety lock, open grass then cut off the electricity automatically.Illumination≥1000Lux

Electric control system

Components with UL (CE) list.The main circuit with multiple protections equipped with lighting switch, temperature time setting normal spray painting, thermostatic spray-painting baking switch, and emergency stop breakdown alarm timer.Floor stand type controller(variable frequency drives)

Noise/waste gas treatment Noise≤80db, activated carbon filter, waste gas achieve Atmospheric Pollutants Comprehensive Discharge Standards GB16297-1996 national standard.



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

S

Booth cabin

Sandwich style compound construction, thickness of wall panel 60mm, color of wall panel white.Upper plate is good galvanized steel plate.Both outside and inside door panel made by color steel plates(Patent NO.1037680)Safety door made by heat preservation panels.Special aluminum alloy column corners. (Patent NO.1037680)The basement with 300mm high is made by steel plates and enhanced metal frame5 rows of galvanized floor gridsNew ramps with external (full galvanized plates)and internal slope(inclined grids)Upper net is spring cotter type, it is convenient to maintain and installment. (Patent NO.1041687)It is unique, beauty appearance (Patent NO.zl033677042), sealing performance is good (Patent NO.1037685).


Back upper intake air 17.5KW intake fan and 17.5KW exhaust fan, direct drive centrifugal fan unit, both intake and exhaust room made by aluminum alloy frame, inner covered with galvanized sheets, outer covered color coated plate. It is heat preservation noise reduction beauty and durable.Intake and exhaust fan tube is with galvanized steel sheet made up of flanges.No-load air volume 0.25m/sAir damper by cylinder control.

Filter systemIntake air filter is high efficiency ceiling filter the primary filter can effectively capture the dust particles over 10m.The primary intake filter can effectively capture the dust particles over 5m.Exhaust filter below rows is high efficiency fiberglass filter. Equipped with mechanical temperature controller.

Heating system

Italy Riello burner, heating capacity 180000kcat/hStainless steel heat exchanger. Argon arc welding.Equipped with mechanical temperature controller.

LightingUpper ceiling light 430W 8 unitsSide light 430W 6 units, aluminum alloy frame, with safety lock, open grass then cut off the electricity automatically.illumination≥1000Lux


Components with UL (CE) list.The main circuit with multiple protections equipped with lighting switch, temperature time setting normal spray painting, thermostatic spray-painting baking switch, and emergency stop breakdown alarm timer.Wall type controller.

Noise/waste gas treatment

Noise≤80db, activated carbon filter, waste gas achieve Atmospheric Pollutants Comprehensive Discharge Standards GB16297-1996 national standard.

SPRAY BOOTH

SF0102

Total equipment dimension (mm) External dimension(mm) Internal dimension (mm) Front door dimension (mm) Power(KW)

8050*5250*5900 7050*3950*3450 6920*3820*2600 3030*2600 17KW

MIDDLE MODEL SF0102




Booth cabin

Sandwich style compound construction, thickness of wall panel 60mm, color of wall panel white.Upper plate is good galvanized steel plate.Front door and safety door made by heat preservation panels.Special aluminum alloy column corners (Patent NO.1037680)The basement with 300mm high is made by steel plates and enhanced metal frame2 rows of galvanized floor grids, 3 rows cover plateNew ramps with external (full galvanized plates)and internal slope(inclined grids)Upper net is spring cotter type, it is convenient to maintain and installment. Patent NO.1041687It is unique, beauty appearance (Patent NO.zl033677042), sealing performance is good (Patent NO.1037685).


Side upper intake airIntake fan 24KW centrifugal fan, exhaust fan 14KW axial fanBoth intake and exhaust room made by aluminum alloy frame, inner covered with galvanized sheets, outer covered color coated plate. It is heat preservation noise reduction beauty and durable.Intake and exhaust fan tube is with galvanized steel sheets made up of flanges.No-load air volume 0.25m/sAir damper by cylinder control.

Filter systemIntake air filter is high efficiency ceiling filter the primary filter can effectively capture the dust particles over 10m.The primary intake filter can effectively capture the dust particles over 5m.Exhaust filter below rows is high efficiency fiberglass filter. Equipped with mechanical temperature controller.

Heating system

Domestic burner, heating capacity 180000kcat/hStainless steel heat exchanger. Argon arc welding.

Lighting Upper ceiling light 430W 8 units aluminum alloy frame,Illumination≥800Lux


Adopt the high quality electronic components.The main circuit with multiple protections equipped with lighting switch, temperature time setting normal spray painting, thermostatic spray-painting baking switch, and emergency stop breakdown alarm timer.Wall type controller.

Noise/waste gas treatment

Noise≤80db, activated carbon filter, waste gas achieve Atmospheric Pollutants Comprehensive Discharge Standards GB16297-1996 national standard.

SF0103

Total equipment dimension (mm) External dimension(mm) Internal dimension (mm) Front door dimension

(mm) Power(KW)

7800*5550*5200 6800*3950*3450 6670*3820*2600 2400*2600 13KW

SPRAY BOOTHCOMMON MODEL SF0103



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

SSpray Booth for Truck Painting

SPRAY BOOTH

SF0104

SF0105

SF0106

SF0107

Item SF0104 SF0105 SF0106 SF0107 Interior Dimension 10000×5000×5000mm(L×W×H) 15000×5000×5000mm(L×W×H)

Exterior Dimension

10144×6896×5600mm(L×W×H)

10144×8106×5600mm(L×W×H)

15144×6896×5600mm(L×W×H)

15144×8106×5600mm(L×W×H)

Front/Rear Door

2pcs, double-door, Main Door×4, 4000×4500mm(W×H),thickness=70mm, wallboard with EPS

2pcs,double-door,MainDoor×4,4000×4500mm(W×H),thickness=70mm, wallboard with EPS

Personnel Door

1pcs, 800×2000mm(W×H); Pressure lock and glass observation window 2pcs, 800×2000mm(W×H); COLOR: WHITE

Wallboard

1.wallboard: color plate-thickness=70mm,δ=0.476mm,socket type ,width=1150 mm, EPS2.the room body frame: 0.8 galvanized steel plate

1.room body: 3pcs x structural steel stiffener in the middle; 3pcs x structural steel composite beam on the top2.wallboard: color plate-thickness=70mm,δ=0.476mm,socket type ,width=1150 mm, EPS3.the room body frame: 0.8 galvanized steel plate

Lighting

Ceiling light:2 rowsX6pcs×4, totally 48pcs×36WBottom light:8pcs×4 totally 32pcs×36W (left/4\right/4)three primary colors modulator tube(Philips),DSH-IIIB ballast,≥600LUX

Ceiling light:2 rowsX10pcs×4, totally 80pcs×36WBottom light:12pcs×4 totally 48pcs×36W (left/6,right/6)three primary colors modulator tube(Philips),DSH-IIIB ballast,≥600LUX

Exhaust Air Type

Pit extraction-840mm ground grid x 2-Gutter size:8000×840 mm(L×W)x2

Two sides extraction,-600x900mm(W x H) exhaust air filter box X 2

pit extraction-840mm ground grid x 2-Gutter size: 13000×840 mm(L×W)x2

two sides extraction,-600x900mm(W x H) exhaust air filter box X 2Inlet air: top, outlet: rear, frame: square steel tube

Control Cabinet Inlet air: top, outlet: rear, frame: square steel tube

Intake & Exhaust System

(1pcs) (2pcs)1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate2.2×double inlet centrifugal fan made by Siemens,single fan’s specifications:model: SW5.6M,power:7.5KW,air volume:20,000m3/h.total:40,000m3/h

1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate2.4×double inlet centrifugal fan made by Siemens,single fan’s specifications.model: SW5.6M.power.7.5KW.air volume.20,000m3/htotal:80,000m3/h

Exhaust Fan: 1×double inlet centrifugal fan,single fan’s model and specifications: model:SW-710H\power:11KW\air volume:36,000m3/h\Total: 36,000m3/h

Exhaust Fan: 2×double inlet centrifugal fan,single fan’s model and specifications: model:SW-5.6M\power:7.5KW\air volume:20,000m3/h\Total: 40,000m3/h

Exhaust Fan: 2×double inlet centrifugal fan,single fan’s model and specifications: model:SW-710H\power:11KW\air volume:36,000m3/h\pressure:1076Pa\belt driveTotal: 72,000m3/h

Exhaust Fan: 4×double inlet centrifugal fan,single fan’s model and specifications: model:SW-5.6M\power:7.5KW\air volume:20,000m3/hTotal: 80,000m3/h

Heating System

(1pcs) (2pcs)1 pcs RG5S fuel oil burner,1 pcs stainless steel heat exchanger,1pcs Electric damper from spraying to baking cycleMax calorific value:260,000Kcal/h.

2 pcs RG5S fuel oil burner,2 pcs stainless steel heat exchanger,2pcs Electric damper from spraying to baking cycleMax calorific value:560,000Kcal/h.

Filter System filter bag, top cotton filter, fiberglass filter, M-type glass fiber filter, activated carbon filter

filter bag, Top cotton filter, Fiberglass filter, Activated carbon filter

Upper Plate Single-deck metal bending plate.

Electric Control System

Spray paint\warming up paint\baking varnish\drying time setting\lighting switch\Malfunction indicator lamp\temperature controller, power switch,Emergency Stop Switch, cumulative time meter, temperature limiter.

Spray paint\warming up paint\baking varnish\drying time setting\lighting switch\Malfunction indicator lamp\temperature controller, power switch, Emergency Stop Switch, cumulative time meter, temperature limiter

Voltage& Frequency 230V-400 V, 60 HZ 230V-400 V, 60 HZ

Luminance ≥600LUX ≥600LUXMax Temperature 80˚C 80˚C

Air Speed ≥0.22m/s ≥0.28m/sMotor Power 29.5KW 33.5KW 57.5KW 66KW

Configuration Optional Configuration Table

Easy-Wear List

SF0104\SF0105 SF0106\SF0107

Heating System

(1pcs) (2pcs)

1pcs RG5S fuel oil burner,1pcs stainless steel heat exchanger,2pcsElectric damper from spraying to baking cycle,Max calorific value:260,000Kcal/h.

2pcs RG5S fuel oil burner,2pcs stainless steel heat exchanger,2pcsElectric damper from spraying to baking cycle,Max calorific value:560,000Kcal/h.

3D Workbench

height 500-4000mmHorizontal scope 900-1200mmVertical scope 9000mmpower:3KWquantity:2pcs

Height 500-4000mmHorizontal scope 900-1200mmVertical scope 14000mmpower:3KWquantity:2pcs

Motor-Driven Carrier

3X3m(LxW) load capacity:5T


Air Compressor

(Pw0110) (W1.6/1.25)

Power(Kw/Hp):7.5/10Max Pressure(Bar):8Air. Delivery(L/Min):900Tank(L):170Available for 2spray guns

Power(Kw/Hp):11/15Max Pressure(Bar): 8Air. Delivery(L/Min):1800Tank(L):320Available for 4 spray guns

SF0104\SF0105 \SF0106\SF0107

Serial No. Name Model Qty.

1 Primary Filter Cotton Intake Fan Filter 40m²

2 Efficient Filter Cotton Top Exhaust Fan Filter 80m²

3 Paint Filter Cotton Bottom Exhaust Fan Filter 40m²

4 Activated Carbon Filter Cotton Exhaust Fan Filter 30m²

5 Lighting Tube 10pcs

6 Electric Control Indicator Light 5pcs

7 Electric Control Relay 3pcs

Installation and Training ExpenseSF0104\SF0105 SF0106\SF0107

Installation and training 4 persons, 15days 6persons, 20days




SF0104

SF0105

3D Drawing



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

S

SF0106

SF0107

3D Drawing




SF0111

SF0112

Spray Booth for Truck PaintingSPRAY BOOTH

Item SF0111 SF0112

Interior Dimension 10000×7000×7000mm(L×W×H)

15000×7000×7000mm(L×W×H)

Exterior Dimension 10144×8746×7600mm(L×W×H)

15144×8896×7600mm(L×W×H)

Front/Rear Door2pcs, double-door, Main Door×5, 5000×5600mm(W×H),thickness=75mm, wallboard with EPS

2pcs,double-door,MainDoor×5, 5000×5600mm(W×H),thickness=75mm, wallboard with EPS

Personnel Door 1pcs, 800×2000mm(W×H); Pressure lock and glass observation window 2 pcs, 800×2000mm(W×H); color: white

Wallboard

1.wallboard: color plate-thickness=70mm,δ=0.476mm.socket type ,width=1150 mm, EPS2.the room body frame: 0.8 galvanized steel plate


Lighting

Ceiling light:3 rowsX6pcs×4, totally 72pcs×36WBottom light:12pcs×4 totally 48pcs×36W (left/4,right/4)three primary colors modulator tube(Philips),DSH-IIIB ballast:≥800LUX

Ceiling light:3 rowsX10pcs×4, totally 120pcs×36WBottom light:12pcs×4 totally 48pcs×36W (left/6,right/6)three primary colors modulator tube(Philips),DSH-IIIB ballast:≥800LUX

Exhaust Air TypeGutter exhaust-840mm ground grid x 3-Gutter size:8000×840 mm(L×W)x3

Gutter exhaust-840mm ground grid x 3-Gutter size:13000×840 mm(L×W)x3


Intake & Exhaust System (2pcs)

1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate2.4×double inlet centrifugal fan made by Siemens,single fan’s specifications,model: SW4.5M,power:5.5KW,air volume:15,000m3/htotal:60,000m3/h

1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate2.4×double inlet centrifugal fan made by Siemens,single fan’s specifications,model: SW5.6M,power:7.5KW,air volume:20,000m3/htotal:80,000m3/h

Exhaust Fan: 2×double inlet centrifugal fan,single fan’s model and specifications: model:SW-560H,power:7.5KW,air volume:27,000m3/h,pressure:1076Pa,belt driveTotal: 54,000m3/h

Exhaust Fan: 2×double inlet centrifugal fan,single fan’s model and specifications: model:SW-710H,power:15KW,air volume:36,000m3/h,pressure:1076Pa,belt driveTotal: 72,000m3/h

Heating System (2pcs)

2 pcs RG5S fuel oil burner:2 pcs stainless steel heat exchanger:2pcs Electric damper from spraying to baking cycleMax calorific value:400,000Kcal/h.

2 pcs RG5S fuel oil burner:2 pcs stainless steel heat exchanger:2pcs Electric damper from spraying to baking cycleMax calorific value:560,000Kcal/h.

Filter System lter bag, Top cotton filter, Fiberglass filter, Activated carbon filterUpper Plate Single-deck metal bending plate.


Spray paint,warming up paint,baking varnish,drying time setting,lighting switch,Malfunction indicator lamp,temperature controller, power switch,Emergency Stop Switch, cumulative time meter, temperature limiter,

Spray paint,warming up paint,baking varnish,drying time setting,lighting switch,Malfunction indicator lamp,temperature controller, power switch,Emergency Stop Switch, cumulative time meter, temperature limiter.

Voltage& Frequency 230V-400 V, 60 HZ 230V-400 V, 60 HZ

Luminance ≥600LUX ≥600LUXMax Temperature 80˚C 80˚CAir Speed ≥0.20m/s ≥0.20m/sMotor Power 42KW 60KW

Optional Configuration TableConfiguration

Easy-Wear List

SF0111 SF0112

Heating System

(2pcs) (2pcs)

2pcs G20 fuel oil burner,2pcs stainless steel heat exchanger,2pcsElectric damper from spraying to baking cycle.Max calorific value:400,000Kcal/h.

4pcs RG5S fuel oil burner,4pcs stainless steel heat exchanger,4pcsElectric damper from spraying to baking cycleMax calorific value:560,000Kcal/h.

3D Workbench

Height 500-4000mmHorizontal Scope 900-1200mmVertical Scope 24000mmPower:3KWQuantity:2pcs



5X5m(LxW)load capacity:5T


Air Compressor

(Pw0110) (W1.6/1.25)

Power(Kw/Hp):7.5/10Max Pressure(Bar):8Air. Delivery(L/Min):900Tank(L):170Available for 2spray guns

Power(Kw/Hp):11/15Max Pressure(Bar):8Air.Delivery(L/Min):1800Tank(L):320Available for 4spray guns

SF0111\SF0112







6 Electric Control Indicator Light 5pcs

7 Electric Control Relay 3pcs

Installation and Training ExpenseSF0111 SF0112

Installation and training 4 persons, 10days 4 persons, 12days



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

S SF0111

SF0112

3D Drawing



AUTO SURFACE REPAIR EQUIPMENT SERIESSpray booth for Bus Painting

SF0108 SF0109 SF0110 SF0113

SPRAY BOOTH

3D Drawing

SF0108



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

SSPRAY BOOTH

Item SF0108 Pit Extraction SF0109 Side Extraction SF0110 Truck Spray Booth SF0113 Industry Spray BoothInterior Dimension 20000×5000×5000mm(L×W×H) 25000×8000×5500mm(L×W×H) 20000×7000×7000mm(L×W×H)

Exterior Dimension

20144×6896×5600mm(L×W×H)

20144×8106×5600mm(L×W×H) 25144×9896×6000mm(L×W×H) 20144×8896×7600mm(L×W×H)

Front/Rear Door 2sets, double-door, Main Door×5, 4000×4500mm(W×H),thickness=75mm, wallboard with EPS

2pcs,double-door, Main Door×6, 6000×5000mm(W×H),thickness=75mm, wallboard with EPS

2sets, double-door, Main Door×5, 5000×5600mm(W×H),thickness=75mm, wallboard with EPS

Personnel Door 2 sets, 800×2000mm(W×H);Pressure lock and glass observation window

2 pcs, 800×2000mm(W×H),Pressure lock and glass observation window

2pcs, 800×2000mm(W×H); Pressure lock and glass observation window

Wallboard




LightingCeiling light:2rowsX13sets×4, totally 104pcs×36Wthree primary colors modulator tube(Philips),DSH-IIIB ballast,≥600LUX

Ceiling light:4 rowsX14 pcs×4, totally 224pcs×36WBottom light:41 pcs×2, totally 82pcs×36W Philips lamp,(left/18,right/18,rear/5pcs)three primary colors modulator tube(Philips),DSH-IIIB ballast:≥800LUX

Ceiling light:3rowsX13sets×4, totally 156pcs×36WBottom light:16 pcs×4, totally 64pcs×36W (left/8,right/8)three primary colors modulator tube(Philips),DSH-IIIB ballast:≥800LUX

Exhaust Air Type

pit extraction-840mm ground grid x 2-Gutter size:18000×840 mm(L×W)x2

two sides extraction,-600x900mm(W x H) exhaust air filter box X 2

Gutter exhaust-840mm ground grid that made of 30×4steel plate x 3-Gutter size:23000×840 mm(L×W)x3

Gutter exhaust-840mm ground grid x 3-Gutter size:18000×840 mm(L×W)x3


Inlet air: top, outlet: rear, frame: square steel tube Inlet air: top, outlet: rear, frame: square steel tube Inlet air: top, outlet: rear, frame: square steel tube

Intake & Exhaust System

(3pcs) (3pcs) (4pcs) (3pcs)

1. the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate2.6×double inlet centrifugal fan made by Siemens,ingle fan’s specifications,model: SW5.6M,power,7.5KW,air volume,20,000m3/hTotal: 120,000m3/h

1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate2.8×double inlet centrifugal fan made by Siemens,single fan’s specifications,model: SW5.6M,power:7.5KW,air volume:20,000m3/hTotal:160,000m3/h

1.the air handing unit is made of spray proximate matter and steel plate, galvanized steel plate2.6×double inlet centrifugal fan made by Siemens,single fan’s specifications,model: SW5.6M,power:7.5KW,air volume:20,000m3/hTotal: 120,000m3/h

Exhaust Fan: 3×double inlet centrifugal fan,single fan’s model and specifications: model:SW-710H\power:15KW\air volume:36,000m3/h\pressure:1076Pa\belt driveTotal: 108,000m3/h

Exhaust Fan: 6×double inlet centrifugal fan,single fan’s model and specifications: model:SW-5.6M\power:7.5KW\air volume:20,000m3/h.Total: 120,000m3/h

Exhaust Fan: 4×double inlet centrifugal fan,single fan’s model and specifications: model:LSW-710H,power:15KW,air volume:36,000m3/h,pressure:1076Pa,belt drivetotal:144,000m3/h

Exhaust Fan: 3×double inlet centrifugal fan,single fan’s model and specifications: model:SW-710H,power:15KW,air volume:36,000m3/h,pressure:1076Pa,belt driveTotal: 108,000m3/h

Heating System

(3pcs) (3pcs) (3pcs)



Filter System filter bag, Top cotton filter, Fiberglass filter, Activated carbon filter filter bag, Top cotton filter, Fiberglass filter, Activated carbon filter

filter bag, Top cotton filter, Fiberglass filter, Activated carbon filter

Upper Plate Single-deck metal bending plate. Single-deck metal bending plate Single-deck metal bending plate


Spray paint\warming up paint\baking varnish\drying time setting\lighting switch\Malfunction indicator lamp\temperature controller, power switch, Emergency Stop Switch, cumulative time meter, temperature limiter

Spray paint,warming up paint,stoving varnish,drying time setting,lighting switch,Malfunction indicator lamp,temperature controller, power switch,Emergency Stop Switch, cumulative time meter, temperature limiter

Spray paint,warming up paint,baking varnish,drying time setting,lighting switch,Malfunction indicator lamp,temperature controller, power switch, Emergency Stop Switch, cumulative time meter, temperature limiter

Voltage& Frequency 230V-400 V, 60 HZ 230V-400 V, 60 HZ 230V-400 V, 60 HZ

Luminance ≥600LUX ≥600LUX ≥600LUXMax Temperature 80˚C 80˚C 80˚CAir Speed ≥0.30m/s ≥0.20m/s ≥0.20m/sMotor Power 85KW 97KW 120KW 90KWColor Optional: white, blue, red and orange-yellow

Configuration

Optional Configuration Table

Easy-Wear List

SF0110 SF0108\SF01109\SF0113

Heating System

(4pcs) (3pcs)

4pcs RG5S fuel oil burner,4pcs stainless steel heat exchanger,4pcs Electric damper from spraying to baking cycle.Max calorific value:1,040,000Kcal/h.

3 pcs RG5S fuel oil burner,3 pcs stainless steel heat exchanger,3pcs Electric damper from spraying to baking cycle. Max calorific value:780,000Kcal/h.

3D Workbench






Air Compressor

(W1.6/1.25) (W1.6/1.25)

Power(Kw/Hp):11/15Max Pressure(Bar):8Air. Delivery(L/Min):1800Tank(L):320Available for 4spray guns

Power(Kw/Hp):11/15Max Pressure(Bar):8Air. Delivery(L/Min):1800Tank(L):320Available for 4spray guns

SF0108\SF0109\SF0110\SF0113







6 Electric Control Indicator Light 10 pcs

7 Electric Control Relay 5 pcs

Installation and Training ExpenseSF0108\SF0109 SF0110 SF0113

Installation and training 6persons, 25days 5persons, 25days 5 persons, 20days




SF0108\SF0109 SF0110 SF0113

Installation and training 6persons, 25days 5persons, 25days 5 persons, 20days

SF0109

SF0110

3D Drawing

SF0113



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

SDETaiLED PiCTUrES

aCCESSoriES

2-LIgHTINg FIxTURES

3-FILTERS

The surface of lighting is treated by powder coated finishing，good appearance and? durable. The lighting fixtures contain the top lights and side lights with total illumination reaches 1200 Lux, Each group of lighting fixture contains 4 fluorescent tubes, Ensure the lighting in the whole booth cabin is The light is more even and gentle, without any shadows. The whole light fixtures are pre-wired in each wall panel to reduce the installation cost, and also make it in compliance with the local electricity requirements. Each lighting fixture is equipped with microswitch button,with the self-locking & power failture function. The position and number of lighting fixtures are designed by ourselves and can meet different requirements of customers, the glass frame adopts the hinge structure, and the maintenance personnel can conveniently open the cover of glass frame inside or outside the booth cabin.

The ceiling filters can effectively filtering 10 micron particles,with filtration efficiency upto 99%.The filter supporting bracket use spring hook structure, it is suitable for single man operation and easy for replacing the ceiling filters. The Primary filter reduces the pollution on ceiling filters. The fiberglass filters which were mounted under the floor grids and in front of the exhaust fan can effectively filtrate the paint mist.

1-BASEmENT

4-DOUBLE WALL PANELS

The whole surface is treated by powder coated finishing or galvanized plates , Can effectively prevent rust and wear well. The special adjustable bottom legs can meet the requirement of uneven ground. The unique bottom supporting frame can be adjusted optionally to ensure the air velocity even inside the booth. We can provide the optional floor structures such as the full galvanized gratings, half-gratings, and slope-build-in type ramps, with the loading capacity up to several tons.

The Internal and external sprayed double wallboard, with rock wool or EPS insulated, can keep long durability at least 20 years. The Socket type structure has good sealing performance; it can effectively prevent the heat from escaping to the outside room and keep the room dust-free.




7-CONTROL PANEL

The pre-wired control panel can achieve a series of automatic operation like paint spraying - flow leveling – baking - cooling down to comply with all kinds of industry standard. All components are UL or CE certified. All the electric wirings pre-assembled inside the control box are compact and easy for maintenance. The digital temperature control system can effectively guarantee simple running for different operations. It can be equipped with PLC control system and variable speed drives to motors, the touch screen operation system can achieve a simple, clear and fully-automatic operation.

aCCESSoriES5-HEATINg SYSTEm

6-FAN

The heat exchanger is made of imported high temperature resistant stainless steel plates after welding process through scientific design and production, the heat exchanger efficiency is up to 90%. It is optional to choose light oil or gas burner; we can also provide the direct firing burners.

The surface of lighting is treated by powder coated finishing,good appearance and? durable. The lighting fixtures contain the top lights and side lights with total illumination reaches 1200 Lux, Each group of lighting fixture contains 4 fluorescent tubes, Ensure the lighting in the whole booth cabin is The light is more even and gentle, without any shadows. The whole light fixtures are pre-wired in each wall panel to reduce the installation cost, and also make it in compliance with the local electricity requirements. Each lighting fixture is equipped with microswitch button,with the self-locking & power failture function. The position and number of lighting fixtures are designed by ourselves and can meet different requirements of customers, the glass frame adopts the hinge structure, and the maintenance personnel can conveniently open the cover of glass frame inside or outside the booth cabin.

8-ENHANCED CURINg SYSTEm-AIR NOzzLES

In the process of air supply, the enhanced curing system provides a new standard, after operating by pressing the button; the filtered air will be blown onto the painted surface thru the adjustable, multi-direction, large diameter nozzles. It makes the curing and solvent volatilization time for the water-borne coatings greatly reduced.



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

SGRINDING BOOTH

SF0201

SF0202

Without Basement Grinding Booth

With Basement Grinding Booth

SF0201\SF0202

Outer dimension 7050*3950*3450

Internal dimension 6920*3820*2600

Color White

Top light 4*2units

Light tube 4*30W*8(philips)

Electroplax

Top sheet material Single layer galvanized plates

The thickness of top plate 0.8

Top filter supporting bracket The steel system of C

Top filtration 600G

Power of exhaust fan 7.5kw direct drive type

Volume of intake fan 25000M3/H

Exhaust model filter(filter cotton)

Construction Section bar(frame)

Outer plates and thickness 0.6 color steel plates

The material and thickness of internal plate

0.6 stamping galvanized plate

curtain three sides curtain

Noise ≤75

Electric controller suspension type

Note

"three sides curtain: nalso can three sides plates and one side curtain Electric controller: With good electric components, the main circuit with multiple protection, with lighting switch, emergency stop, breakdown stop SF0202Basement: 300mm high with good steel and high-duty steel"



AUTO SURFACE REPAIR EQUIPMENT SERIESPAINT CURING LAMP

Specifications

Features Features

Features Features

- Aluminum upright column reduces the weight of whole machine Philips or Vpower 21 inch short-wave infrared quartz halogen lamp

- Automatic devices, with electronic timer - The angle of lamp panel can be adjusted in the

lengthwise and lateral directions - 1nput voltage: lph230V 5/1 OA 50/60Hz - Power 1000W(l lamp) 2000W(2 lamps) - Temperature range:40°C-80°C - Adjustable time setting - The low and high temperature automatic switch

is specially set due to the very quick heating speed of halogen lamp panel

- Super-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire



lengthwise and lateral directions - Input voltage: 1 ph230V 5/1 OA 50/60Hz - Power:2000W(2 lamps) 3000W(3 lamps)

6000W(6 lamps) - Temperature range:40<C-801C - Adjustable time setting - The low and high temperature automatic switch

is specially set due to the very quick heating speed of halogen lamp panel Super-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire



lengthwise and lateral directions - 1nput voltage: lph230V 5/1 OA 50/60Hz - Power:1000W(l lamp) 2000W(2 lamps) - Temperature range:40eC-80#C - Adjustable time setting - The low and high temperature automatic switch is

specially set due to the very quick heating speed of halogen lamp panel

- Super-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire

- Aluminum upright column reduces the weight of whole machine

- Philips or Vpower 21 inch short-wave infrared quartz halogen lamp


lengthwise and lateral directions - Power:2000W(2 lamps) 3000W(3 lamps)

6000W(6 lamps) - Temperature range:40°C-80t^ - Adjustable time and temperature setting - The low and high temperature automatic switch

is specially set due to the very quick heating speed of halogen lamp panel Super-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire

- Fully automatic distance sensor - Fully automatic overload protection

Model SF0401 SF0402 SF0403 SF0404

Power supply lph 230V lph 230V lph230V lph 230V

Rated power 1000W 2000W 3000W 3000W

Height adjust 0.2-2.1m 0.2-2-lm 0.2-2. lm 0.2-2. lm

Work current 4.15A 8.3A 13.6A 13.6A

Output temperature 40-80°C 40-80°C 40-80°C 40-80°C

Time adjust 0.1-30min 0.1-30min 0.1-30min 0.1-99min

Working distance 0.5-0.7m 0.5-0.7m 0.5-0.7m 0.5-0.7m

Packaging Size 70*70*23cm(0.113CBM)152*4*4cm(0.002cbm)

70*70*23cm(0.113CBM)152*4*4cm(0.002cbm)

158*70* 18cm(0.2CMB) 108*83*18cm(0.162CMB)

158*70* 18cm(0.2CMB) 108*78* 18cm(0.162CMB) 83*72* 18cm(0.108CBM)

Gross Weight 12kg 2kg 16kg 2kg 28+22+14=64kg

SF0401

SF0403

SF0402

SF0404



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

S

Specifications

Features Features

Model SF0405 SF0406

Power supply lph230V lph 230V

Rated power 6000W 6000W

Height adjust 0.2-2. lm 0.2-2.1m

Work current 27.2A 27.2A

Output temperature 40-80eC 40-80BC

Time adjust 0.1-30min 0.1-99min

Working distance 0.5-0.7m 0.5-0.7m

Packaging Size 158*70* 18cm(0.2CMB) 108*83*36cm(0.324CMB) 158*70* 18cm(0.2CMB) 108*78* 18cm(0.162CMB) 83*72*18cm(0.108CBM) 83 *72* 18cm(0.108CBM)

Gross Weight 83kg 28+22+14+14=78kg

PAINT CURING LAMP


- Automatic devices, with electronic timer - The angle of lamp panel can be adjusted in the lengthwise and

lateral directions - Input voltage: 1 ph230V 5/1 OA 50/60Hz - Power:2000W(2 lamps) 3000W(3 lamps) 6000W(6 lamps) - Temperature range:40<C-801C - Adjustable time setting - The low and high temperature automatic switch is specially

set due to the very quick heating speed of halogen lamp panel Super-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire

- Aluminum upright column reduces the weight of whole machine

- Philips or Vpower 21 inch short-wave infrared quartz halogen lamp


lengthwise and lateral directions - Power:2000W(2 lamps) 3000W(3 lamps) 6000W(6

lamps) - Temperature range:40°C-80t^ - Adjustable time and temperature setting - The low and high temperature automatic switch is

specially set due to the very quick heating speed of halogen lamp panel Super-low and wide chassis can be applied to the low-chassis automobile and widthwise pass through tire

- Fully automatic distance sensor - Fully automatic overload protection

SF0405 SF0406



AUTO SURFACE REPAIR EQUIPMENT SERIESDUST-FREE GRINDING SYSTEM

SF0601

SF0602

SF0603 SF0604

Description - This industrial used vacuum collection dust equipment is specially for dauntlessness

polish design, may coordinate the use air operated, the electrically operated grinding machine, the hand to dig and so on the necessary polish tool.

- The main engine sign matches lengthens 6 meters double sweep-up pipes, may with enter uses two sand mills also to work, convenient teaching and enhancement work and equipment use efficiency.

- The two-stage power electrical machinery ultra-static sound motor provides when a peaceful comfortable peaceful work not boundary work for you the biggest noise only then 80 decibels.

- The function consummation has the automatic/manual two kind of work pattern vacuum collection dust barrel to leave may take does the wet vacuum cleaner clean factory workshop.

- Tertiary filtration remarkable enhancement dust removal effect, safeguard working conditions promotion working efficiency

- Side example replacement filter (at the back of top head sponge filter frame) - The sand mill rotary system connection distortion compensation, guaranteed the tool

causes the dust leg not to be able to twine. - The main engine disposition oil mist, the sand mill works when can automatically carry on

the maintenance lubrication through the air feed. - The stochastic present may clean the filter and the filter pocket .

Specifications

Configuration-1

Configuration-2

Model Power Power Supply Water MT Air flow Tank Capacity Dimensions

(W) (V) (mm/H2O) (m3/min) (L) (mm)

SF0601 1200 240/230/220 2100 2.8 45 680x700x930

SF0602 1250 240/230/220 2274 2.8 55 720x420x950

SF0603 1250 240/230/220 2274 2.8 55 900 × 470 × 1500

SF0604 1200x2 240/230/220 2300 4 55 1100 × 470 × 1500

SF0605 1500 240/230/220 2274 3.5 25 900 × 470 × 1500

Accessory Name 5"Orbital Sander 6"Orbital Sander Square Sander Y-type Hose fitting Dust Hose

Item No PW0500-63 PW0500-66 PW0500-69 SF0600-51 PW0500-51

Parameters

Dimensions:123 mmAir consumption:0.3 m³/minFree speed:10000 rpmAir pressure: 90 psiDeflection diameter:5 mm

Dimensions:148 mmAir consumption:0.3 m³/minFree speed:10000 rpmAir pressure: 90psiDeflection diameter:5 mm

Dimensions:78x176mmAir consumption:0.4 m³/minFree speed:10000 rpmAir pressure:90psiDeflection diameter:5 mm

Dual pipette accessories, polymer plastics manufacturing, anti-beat, mold manufacturing, good sealing

Length:38MMX5M+32MMX1MEasy to use for long distances, compressive strength, high temperature 80 low temperature 40 degrees is not damaged.Overall Length 6M

Unit set set set pcs pcsSF0601 1 \ 1 1 1SF0602 1 \ 1 1 2SF0603 1 1 1 1 2SF0604 1 1 1 1 2

Accessory Name

Vacuum Hand Sanding Hand Sanding Hand Sanding Multi-Use

Sanding PadMulti-Use Sanding Pad

Disposable Bags Dry Abrasive Paper Dry Abrasive Paper Dry Abrasive Paper

Item No PW0500-62 SF0600-42 SF0600-41 SF0600-31 SF0600-32 SF0600-01 SF0600-11 SF0600-21 SF0600-22

Parameters70×120mm70×200mm

70×100mm70×135mm70×200mm

9pcs set, the manual sanding is suitable for different angles

6"15-holes 5"6-holes 8LDimensions:95X180P80\P120\P180\P240\P320\P400\P600

Dimensions:5"6-holeP80\P120\P180\P240\P320\P400\P600

Dimensions:6"6-holeP80\P120\P180\P240\P320\P400\P600

Unit set set set pcs pcs pcs pcs pcs pcs

SF0601 \ 1 \ \ 1 \ 50 50 \

SF0602 \ 1 \ \ 1 \ 100 100 \

SF0603 1 \ \ 1 1 1 100 100 100

SF0604 1 \ 1 1 1 1 100 100 100



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

S5"Orbital Sander

PW0500-63"Dimensions:123 mm Air consumption:0.3 m³/min Free speed:10000 rpm Air pressure: 90 psi Deflection diameter:5 mm "

6"Orbital Sander

PW0500-66 "Dimensions:148 mm Air consumption:0.3 m³/min Free speed:10000 rpm Air pressure: 90psi Deflection diameter:5 mm"

Square Sander

PW0500-69 "Dimensions:78x176mm Air consumption:0.4 m³/min Free speed:10000 rpm Air pressure:90psi Deflection diameter:5 mm"

Y-type Hose fitting

SF0600-51Dual pipette accessories, polymer plastics manufacturing, anti-beat, mold manufacturing, good sealing

Dust Hose

PW0500-51 "Length: 38MMX5M+32MMX1M Easy to use for long distances, compressive strength, high temperature 80 low temperature 40 degrees is not damaged. Overall Length 6M"

Vacuum Hand Sanding

PW0500-62"70×120mm 70×200mm"

Hand Sanding

SF0600-42 "70×100mm 70×135mm 70×200mm"

Hand Sanding

SF0600-419pcs set the manual sanding is suitable for different angles

Multi-Use Sanding Pad

SF0600-316"15-holes

Multi-Use Sanding Pad

SF0600-325"6-holes

Disposable Bags

SF0600-018L

Dry Abrasive Paper

SF0600-11 "Dimensions:95X180 P80\P120\P180\P240\P320\P400\P600 "

Dry Abrasive Paper

SF0600-21"Dimensions"5""6-hole P80\P120\P180\P240\P320\P400\P600"

Dry Abrasive Paper

SF0600-22"Dimensions:6""6-hole P80\P120\P180\P240\P320\P400\P600"

ConSUmE ThE maTEriaL



AUTO SURFACE REPAIR EQUIPMENT SERIESSANDBLAST TANK

5GALLON SANDBLAST TANK


28GALLON ABRAISIVE BLASTER WITH VACUUM


SF0701

SF0703

SF0704

SF0702

Function

Function

Function

Function

- Pressurized design 30% more sandblasting power than siphon unite.

- Provides more abrasive when you need truly efficient performance.

- Sandblast parts before welding or painting

- Replaceable ceramic tips in nozzle prolonging service life;

- Use aluminum oxide or glass beads for cleaning;

- Built-in vacuum eliminates the need for breathing apparatus. Recycles abrasives for reuse.

- Separates abrasive from debris - Cuts cleanup time

- Pressurized design 30% more sandblasting power than siphon units.

- Provides more abrasive when you need truly efficient performance.

Specification

Specification

Specification

Specification - Equipped with a nozzle and

shut-off valve, pressure gauge, ceramic nozzle,2.5mm

- Hose, filling funnel, water-trap, 6"rubber wheels and can vas hood

- Tank Dimension: 1 0" Diameter, 1 5"Length

- Overall diameter: 83cm(H)x48cm(L)x29cm(W)

- Hose Length: 2.5m - Work pressure: 60-1 25PSI &

6-25CFM - Tank volume: 5Gals - Air consumption: 6-25CFM

- Heavy-duty all steel construction;

- Tank volume:20Gallon - Air Consumption: 6-25CFM - Overall dimension: 92cm(H) x

78cm(L) x 38cm(W) - Equipped with new sandblast

gun and concerned necessary parts

- Hose length: 10feet - Working pressure: 60-125PSI

- Use with most blast media including silica, shot, and shell

- Removable dust container - 6" diameter rear wheels for easy transport - Air consumption: 6-22.5CFM @ 11 5PSI - Motor power: 1 200W - Air inlet: 1/2"-18NPT - Tank size: 41 '(H) x 15" (I.D)

- Equipped with a nozzle and shut-off valve, pressure gauge, ceramic nozzle,2.5mm, hose, filling funnel, water trap, 6" rubber wheels and can vas hood.

- Tank Dimensions:12" Diameter, 20"Length - Overall Dimension: 83cm (H)x48cm(L)x33cm(W) - Hose Iength:2.5M - Work pressure: 60-1 25PCI & 6-25CFM - Tank volume: 10G



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

S

Specification

Function Function

Specification

Specification

Specification

SANDBLAST TANKBENCH TOP SANDBLAST CABINET

SF0705

- Cleaning parts quickly and easily.

- Through the sealed rubber glove parts, you control the high- efficiency air blast gun inside, directing 100 maximum PS I abrasive flow to clean parts FAST I

- For use with glass beads, silica sand, alum oxide and more.

- Red finish steel cabinet have a transparent plastic top door, helps keep abrasive dry.

- Air compressor delivery of 40-80 PS I @ 5CFM

- Overall dimension: 66cm(L)x53cm(W)x49cm(H)

- Working space: 56cm(L)x46cm(W)x28cm(H)

- Natural rubber/vinyl blast gloves - Perforated steel flooring-abrasive - Large particle-separating screen - Clean-out door. - Powder coated inside and outside - Air regulator/ gauge panel. - 14 gauge steel legs (16 gauge panels) - Eliminating typical suction pick-up tubes and hoses, media metering - Series blast cabinets in an entirely different class from the competition. - External fluorescent lighting system, Packed in wooden case. - Overall dimension: 1 03x90x164 cm - Work area: 94.5x60.5x60.5cm - Air pressure range: 60PSI-120PSI - Sand capacity: approx 40lb - Abrasive media: silica sand, glass beads, silicon carbide, emery, plastic sand, etc. - Power requirement: 110V,60Hz or 230V,50Hz - Output voltage: 12V

220L CAPACITY VERTICAL SANDBLAST CABINET

SF0706-II - Blast rust, corrosion and paint on

large parts in a enclosed cabinet to keep dust off the floor and out of the air.

- Heavy steel construction, double door on the sides

- Transparent glass viewing window - 40-80PSI @ 1 5-25CFM - Working space: 60x84x63cm - Overall dimension:

SF0706-l: 38cm (H)x87cm(L)x63cm(W)SF0706-ll:145cm (H)x87cm(L)x63cm(W) - Electrical requirements of light: 11

5V/230V,the - SF0706-I has two lights - Maximum operation pressure: 125PSI

SF0706

SF0707

SF0708

350L CAPACITY INDUSTRIAL SANDBLAST CABINET

420L CAPACITY INDUSTRIAL SANDBLAST CABINET

- Natural rubber/ vinyl blast gloves. - Perforated steel flooring-abrasive large particle-separating screen and clean-

out door. - Powder coated inside and out. - Extra-rugged, heavy-duty production foot valve assembly. Built to blast with

heavy steel housing and high-production brass flow valve. - Air regulator / gauge panel. - 14 gauge steel legs (16 gauge panels) - Eliminating typical suction pick-up tubes and hoses, media metering valve

puts our economy - Series blast cabinets in a entirely different class from the competition. - External fluorescent lighting system. Packed in wooden case. - Overall dimension: 130x63x1 70cm - Work pressure range: 50-125PSI



AUTO SURFACE REPAIR EQUIPMENT SERIESSANDBLAST TANK

10GALLON ROLL-ABOUT SAND-BLASTER

90LB SIPHON FEED SANDBLASTER

20GALLON ROLL-ABOUT SANDBLASTER

SF0709SF0710

- 65-125PSI operation pressure comes with safety pressure release valve and 3/8in brass valve.

- Using granular abrasives under high pressure and includes 3/8in brass valves.

- Also comes with 8ft, heavy duty 3/8in. - Hose with carbon steel shut-off valve

and 4 inter changeable nozzles. - Hood and instruction are in stock; - Hose length: 1 Oft - Tank dimension: 10" dia, 24-1/2"length

- Has safety pressure release valve,3/8in. Brass valves for air throttling and sand metering.

- Work pressure: 65 to 125PSI - Baked enamel finish. - Heavy duty 3/8in, 8-ft,hose has carbon steel shut off valve and 4 inter

changeable nozzles. - Hood and instruction are in stock; - Hose length: 10ft - Tank dimension: 12-1/2"dia, 27"length - Pressure gauge indicator: 0-125PSI - Required compressed air system (not included): 2HP compressor with 3/8"

diameter air hose - Recommended media type: glass bead, silicon carbide, alumina, walnut

shell, brass bead - Recommended use: use with 80, 100,120 grit media, at60PSI, with 3/32".

Nozzle for best results (run time; 45minutes with 90lbs, media - Water trap type: push button to drain - Accessories: 3/32" nozzle,

- Sand Grade Type: up to 60 grit - Abrasive material; aluminum oxide, garnet powder, glass bead - Drum capacity: (gallons) 3.7uk - Sand capacity: 22.6/50 kg/lbs. - Operating pressure: 1 00-1 50PSI - Flow rate req: 10-1 6CFM - Compressor size HP (minimum): 3 - Gun inlet size: 3/8" hose adaptor fitted - Air inlet hose diameter: 3/8" (10mm) - Nozzle sizes: 4mm,5mm,6mm,7mm, (ceramic)

SF0711

Specification

Specification

Specification



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

SHAND HELD SANDBLASTER

Hand held sandblaster with 4 extra function nozzle

Hand held sandblaster with 2 inter ceramic nozzles

SF0801

SF0802

- ALL NEW ERGONOMIC LEGERITY FUNCTION - Always wear eye protection and protective clothing equipment

to avoid injuries. - Please pay attention, that the operation pressure never exceed

over 6,7 bar. - Disconnect the tool from the air-supply before changing

accessories or when nothing in use. - Light weight plastic gun body. - Tank 0.9L capacity. - Operating pressure 90PSI. - Air Inlet: 1/4" NPT female - 4 Extra functional nozzles.

- Always wear eye protection and protective clothing equipment to avoid injuries.

- Please Pay attention, that the operation pressure never exceed over 6,7 bar.

- Disconnect the tool from the air-supply before changing accessories or when nothing in use.

Specification

Specification



AUTO SURFACE REPAIR EQUIPMENT SERIESCOLOR MATCHING SYSTEM/PAINT MIXING MACHINE

LA100 SERIES MIXING LIDBIG MIXING LID SMALL MIXING LID

Features - Unique pouring spout realizes accurate demand for operation. - Unique Can-Fixed way, convenient to paint amount. - Imported sealing material makes better sealing effect. - Apply to waterborne automotive paint. - Perfect design, no paint leakage or air loss. - Apply to all paint brands

ApplicationSmall Mixing Lid Big Mixing LidFor 0.5-1 Liter cans

For 2.5-4 Liter cans

Features - Worldwide originally developed independent

mixing units system of the mixing machine, super quiet.

- Heads of the mixing machine can be configured flexibly.

- Modularized design, rich product series. - Stable and reliable performance, maintenance

free. - Working table and adaptor plate are optional. - Apply to all paint brands.

Standard schemes Heads Heads for

big cans Heads for small cans

Dimension(mm)

Power(w)

(L×W×H)

SF1601 2 1 1 367×196×395 30

SF1602 19 5 14 1006×209×1097 260

SF1603 19 5 14 1006×209×1022 260

SF1604 19 5 14 1006×209×1022 260

SF1605 20 0 20 1390X380X1807 255

SF1606 37 7 30 1390X380X1807 555

SF1607 47 7 40 1390X380X1807 705

SF1608 26 0 26 1780X380X1807 280

SF1609 61 9 52 1780X380X1807 900

SF1610 28 0 28 1960×380×1807 350

SF1611 52 10 42 1960×380×1807 750

SF1612 62 20 42 1960×380×1807 900

SF1613 66 10 56 1960×380×1807 900

SF1614 76 20 56 1960×380×2098 1000

SF1615 80 10 70 1960×380×2098 1000

SF1616 75 11 64 2090×380×1807 1125

SF1617 86 22 64 2090×380×1807 1260

SF1618 91 11 80 2090×380×2098 1365

SF1619 84 12 72 2342×380×2098 1000

SF1620 96 24 72 2342×380×2098 1400

SF1621 102 12 90 2342×380×2098 1400



AUTO S

URFAC

E REPA

IR EQU

IPMENT

SERIE

S BBa242(Panda7) BBa212

model BBA242 (Panda7)/BBA212

Weighting capacity 7100g/5000g

Accuracy III OIMLReadability Full Range: 0.1g

Delta Range: 0.05g(0-999.95g), 0.1g (1000-7100g)Weighing units g, oz, p (1part = 1/32 oz)

Display LCD, Backlit, height: 12mmStabilization

time Approx. 1.0 second

Pan size 232 mmStand height 342 mmWeighing pan

height 78mm

Power supply Via adapter 15V, 250mANet /gross

weight 3.8/4.5kg

Interface RS232Package sizes 380mmx250mmx280mmTemperature

range 5-35˚C

Relative humidity 20-80%

COLOR MATCHING SYSTEM/PAINT MIXING MACHINE



AUTO SURFACE REPAIR EQUIPMENT SERIESPNEUMATIC PAINT DRYER GUN

SF1801The portable dry-blowing system is suitable for every spray booth and every work place. The blow guns can be exactly directed to the object. Once the air supply has been opened, the system is completely self-sufficient.

Features - Flexible positioning of the stand - Infinite adjustment of the blow gun towards the object - Doubled surface efficiency when using two dry-blowing spray guns - Dry jet stand - Blow guns can be adjusted on the stand in heights ranging from 30 to 190 cm, 12"to 75". - The width of the stand is 82 cm(32") and can be extended to 170 cm(66") with the third gun extension - Blow guns can be rotated by full 360° - Connection to standard compressed air hose - Weight: 265g - Adjustable Air Flow Working Pressure: 43PS1 - Increases Air Flow by 10:1 - Maximum Pressure: 6.8Bar (98PS1) - Air Consumption: 200E/Min (7CFM) - Maximum Pressure:174PS1 - Air inlet: 1/4" -8NPS

Date post:	06-Apr-2016
Category:	Documents
Upload:	beijing-sylvan-automotive-equipment-co-ltd
View:	215 times
Download:	0 times

Surface repair equipment for auto/car/motor-SYLVAN

Documents