1
3–5 April 2019 Deltares Boussinesqweg 1 2629 HV Delſt, The Netherlands Deltares is an independent institute for applied research in the field of water, subsurface and infrastructure. Throughout the world, we work on smart solutions, innovations and applications for people, environment and society. The department “Hydraulics for Infrastructure and Industry” (H2I) of Deltares is an international specialist group on fluid transients and advanced control of pipeline systems, working for the water industry, oil & gas industry and energy industry. The Hydraulics for Infrastructure and Industry group of Deltares has a history of more than 50 years in providing services to the water industry around the world. These services include: • Research and development • Soſtware development (WANDA) • Specialized consultancy • Training courses • Field measurements for commissioning and trouble shooting http://www.deltares.nl/en/about-deltares https://www.deltares.nl/en/issues/infrastructure-for-water-and-energy/ Surge Analysis and Hydrodynamic Behaviour of Pipeline Systems course E-mail: [email protected] | Phone: +31(0)88 335 8188 If you have any further queries, please do not hesitate to contact Nancy Dijkhuizen www.deltaresacademy.com We believe that a thorough understanding of the hydrodynamic behaviour in a pipeline system is essential to guarantee a low cost, safe and reliable system. With this course, we will enhance your understanding of this hydrodynamic behaviour and teach you how to perform a basic surge analysis yourself. • Obtain thorough understanding of hydraulic aspects in pipelines • Learn to select and design mitigating measures to prevent excessive surge (water hammer) • Deepen knowledge on hydraulic processes leading to water hammer • Practice hydraulic modelling of pipelines The following topics will be addressed: • Introduction to water hammer and mitigating measures • Modelling exercises and practical examples with WANDA • Theoretical aspects of water hammer and rigid columns • Effect of valve operations • Practical examples from participants Temporary licenses for modelling soſtware (WANDA) will be made available. The course aims at engineers with different educational backgrounds (such as civil, mechanical, and process) working in the fields of the water industry (i.e. drinking water, wastewater and cooling water), the process industry (oil & gas) or the chemical industry. Deltares’ long experience with these courses has proven to have added value in particular to water utilities and consultants. A BSc degree in water engineering, engineering science, physics, or other scientific discipline is recommended The course fee is € 1,450.-- for three days, excluding VAT. In order to register for this course, please visit www.deltaresacademy.com Registration must be done before March 9 th 2019 The minimum required number of participants is 10 3 - 5 April 2019 The course venue will be held at Deltares Boussinesqweg 1, 2629 HV Delſt, The Netherlands. The course consists of presentations, lectures, discussion sessions and workshops, all in English. We provide a certificate of participation aſter completion of the course. PO Box 177 2600 MH Delſt, The Netherlands [email protected] www.deltares.nl
