161
Grinding Jigs
SVM-45Knife Jig
For most knives. Minimum blade length 60 mm (2⅜"). Carvers draw knives.
0.20 kg0.44 lbs
SVM-00Small Knife Holder
Enables you to sharpen the smallest knives like chip carving knives and pocket knives. Works in conjunction with SVM-45.
0.11 kg0.25 lbs
SVM-140Long Knife Jig
Stabilizes a thin blade.Minimum blade length 160 mm (6¼").
0.27 kg0.60 lbs
SVX-150Scissors Jig
For scissors and shears.Also for portable electric hand planer blades.
0.43 kg0.94 lbs
SVA-170Axe Jig
For carving and carpenter’s axes.Max. axe size 170 mm (6½").
0.16 kg0.35 lbs
SVS-38 (SVS-32)Short Tool Jig
For straight shanked tools down to 45 mm (1¾") length. Also for power carvers. SVS-38: Max tool width 38 mm (1½"). SVS-32: Max tool width 32 mm (1¼").
0.17 kg0.38 lbs
SVD-186 (SVD-185)Gouge Jig
For fingernail shaped turning gouges.Bent carving gouges and curved V-tools.Max. width 36 mm (1⅜"). Also for turning cutters.
0.48 kg1.05 lbs
SVS-50Multi Jig
For turning skew chisels, parting and beading tools and roughing gouges. Straight shanked carving gouges up to 50 mm (2") width. Carving chisels.
0.26 kg0.58 lbs
SVD-110Tool Rest
For turning scrapers, screw drivers, cabinet scrapers, hollowing tools and spoke shave blades.
0.27 kg0.59 lbs
SE-77 (SE-76)Square Edge Jig
For plane irons and wood chisels. Aligns the tool automatically to its upper and flat side. With safety stops. Max tool width 77 mm (3").
0.63 kg1.38 lbs
SVH-320Planer Blade Attachment
For HSS blades of any length.Min. width 13 mm (½").Also for mitre guillotine blades.
1.85 kg4.10 lbs
Continues on the next page
162
TT-50Truing Tool
With screw feed. Trues the stone exactly round and flat.
0.26 kg0.58 lbs
SP-650Stone Grader
For grading the grindstone to a finer grit.Also for renewing a glazed stone.
0.40 kg0.88 lbs
WM-200AngleMaster
For setting and measuring of any edge angle from 10° to 75°. For any stone diameter from ∅ 250 mm (10") down to ∅ 150 mm (6").
0.063 kg0.14 lbs
TTS-100Turning Tool Setter
For an exact replication of the shape and edge angle on your gouges and skews when using the SVD-186 and the SVS-50.
0.19 kg0.42 lbs
PL-01Profile Labels
Set of 9 extra labels for noting the geometries on your gouges and skews.
0.01 kg0.02 lbs
PA-70Honing Compound
For the leather honing wheels. 0.09 kg0.20 lbs
LA-120Profiled Leather Honing Wheel
For inside honing and polishing of gouges and V-tools. With exchangeable leather discs. One with 3 mm (⅛") radius and one with a 60° tip.
0.26 kg0.57 lbs
LA-124Set of optional narrow discs
One with 2 mm (3/32") radius and one with a 45° tip.
0.068 kg0.15 lbs
MH-380Machine cover
For protecting the machine from wood dust. 0.15 kg0.33 lbs
Accessories
SVP-80Moulding Knife Attachment
Sharpens all makes and shapes of moulding knives with 24, 30 or 38 mm distance between guide hole centres. Max width 100 mm (4").
1.22 kg2.69 lbs
DBS-22Drill Bit Sharpening Attachment
For sharpening drill bits. 4-facet point for highest precision and efficiency. Separate instruction comes with the product.
3.30 kg7.28 lbs
Grinding Jigs continued
163
SG-250Original Grindstone
For the T-8/T-7 model. ∅ 250×50 mm. Developed to combine efficient steel removal, smooth surface finish and long life.
5.06 kg11.16 lbs
SG-200Original Grindstone
For the T-4/T-3 model. ∅ 200×40 mm. Developed to combine efficient steel removal, smooth surface finish and long life.
2.60 kg5.73 lbs
SB-250Blackstone Silicon
For the T-8/T-7 model. ∅ 250×50 mm. Delivers fast steel removal on HSS, exotic alloys and tools with large bevel area. It can also touch up carbide. 220 grit.
4.23 kg9.33 lbs
SJ-250Japanese Waterstone
For the T-8/T-7 model. ∅ 250×50 mm. Provides an extra fine surface finish on hand tools where a minimum of steel removal is needed.
5.23 kg11.53 lbs
SJ-200Japanese Waterstone
For the T-4/T-3 model. ∅ 200×40 mm. Provides an extra fine surface finish on hand tools where a minimum of steel removal is needed.
2.70 kg5.95 lbs
Grindstones
Accessories continued
HB-10Handbook
“Water Cooled Sharpening of Edge Tools.” 0.35 kg0.77 lbs
DVD 2.1The Tormek DVD
“Edge tool sharpening the Tormek way” 0.05 kg0.10 lbs
TNT-300Woodturner’s Instruction Box
Contains TNT DVD film and detailed handbook. Shows how to shape, sharpen and hone all your turning tools.
0.70 kg1.54 lbs
BGM-100Bench Grinder Mounting Set
For using the turning tool jigs SVD-186, SVS-50 and the Tool Rest SVD-110 on a bench grinder.
0.80 kg1.76 lbs
RB-180Rotating Base
Enables you to easily rotate the machine 180° and lock it with complete stability.
0.71 kg1.57 lbs
RM-533Rubber Work Mat
With the Tormek Rubber Work Mat you get a water proof yet non slip surface.
1.62 kg3.58 lbs