www.loadquip.com.au
ENGINEERING SOLUTIONS FOR MINING & HEAVY INDUSTRY
Swing Wheel Low LoaderSW450
Model SW450 Swing Wheel Low Loader
Rated Capacity 450 tonnes
Prime Mover Caterpillar 793
Max Speed 55 km/h (unloaded)
Prime Mover Tyres 40R57
Trailer Hubs Caterpillar 793D
Trailer Tyres 50/80 R57
Overall Length 38.7 m (incl. prime mover)
Overall Width 10.4 m
Max Payload Width 7.77 m
Ramp Incline (Load/Unload) 9 degrees
Turning Circle 25m radius (SAE J695 Definition)
Typical Loading Cycle 10 minutes
www.loadquip.com.au
ENGINEERING SOLUTIONS FOR MINING & HEAVY INDUSTRY
Machine Capabilities
Dimensions
Mine Site Performance
Rated for continuous fully loaded operation up and down ramps >10% and unloaded speed up to 55 km/hr
Heavy-duty oil-cooled disc brakes allows continuous descent at maximum rated speed without overheating
Maximum Mobility and Flexibility
Swing wheels allow easy loading and unloading from integrated ramp
Shallow ramp angle allows easy loading and unloading of difficult payloads such as blasthole drills
Large articulation range between prime mover and trailer, and single rear axle, allows tight manoeuvring without tyre scrub
Advanced Features
Hitch quick-disconnect feature allows access for prime mover maintenance and allows prime mover to be used for towing
WLAN telemetry for remote diagnosis and troubleshooting
Reliability and Maintainability
Extensive use of Caterpillar parts and industry-standard hydraulic components, fittings and hoses
No need for separate power unit - power and hydraulics sourced from prime mover
Control
Multiple control stations (local and remote) allows easy and safe one-person operation
Safe Access
Standards-compliant access systems provides operators safe access to/from payload and trailer
6364
38673 - APPROX.
2794929300
1048
9
38673
