www.intra-lighting.us M: 1.647.891.4414 T&F: 1.888.560.5885 e-mail: [email protected]Project: Type: QTY: SWORD R linear, recessed mounted fluorescent fixtures FIND IT ONLINE: http://www.intra-lighting.com/luminaries.aspx?catid=1160 Description Mounting type Optic Ballast Lenght Direct lamp power Spot power Fixture type Color 1U3.71 - Sword recessed 1 - GL 2 - HDP 3 - HMP 4 - PR 5 - AS 4 - Electronic 120-277V 0 - Electronic 347V 3 - 1-10V dimmable 120V 2 - 1-10V dimmable 277V 5 - ECO system Lutron 6 - HI ČLume 3D Lutron 1 - Single lamp length (2x lamp) 2 - Double lamp length (2+2x lamp) 6 - 14W, T5 8 - 24W, T5 7 - 21W, T5 9 - 39W, T5 1 - 28W, T5 4 - 54W, T5 2 - 35W, T5 0 - Without spot 0 - Single fixture 1 - White 5 - Silver grey Notes - Dimmable ballasts (1-10V, ECO system, Hi-Lume 3D) available only for T5 lamps 21W, 39W, 28W and 54W - Double lamp length version not available for T5 14W and 24W lamps 1U3.71 0 0 Mounting type Optic Ballast Lenght Direct lamp power Spot power Fixture type Color USE THIS CHART FOR INDIVIDUAL FIXTURES ONLY, FOR CONTINUOUS RUNS SEE SWORD LINE. 1. Body: Made from extruded aluminium profile with polycarbonate end-caps; white or silver grey color (powder coated) 2. Control gear: Electronic ballast (universal voltage 120/277V or 347V) or dimmable ballast (1-10V, ECO system, Hi-Lume 3D). Ballasts are mounted on gear tray enabling easy access 3. Lamps: Double T5 or T5 HO in cross-section. Staggered lamps for 4 or more lamps only for GL and PR diffuser versions. Fixture lengths and lamping are as noted on next page (consult factory for other lengths) 4. Optics: Specular/mirror or satin silver-coated aluminium optics with excellent glare control, blades closed on top, optics stay hooked on during maintenance, anti-dust protection stretch film; for details see following pages 5. Diffuser: Micro-prismatic (PR) or opal blend (GL) made of polycarbonate, glow wire test 850°C 6. Holder for recessed installation: Provided by Intra lighitng 1 6 2 3 4 5
0 - Without spot 0 - Single fixture 1 - White5 - Silver grey
Notes - Dimmable ballasts (1-10V, ECO system, Hi-Lume 3D) available only for T5 lamps 21W, 39W, 28W and 54W - Double lamp length version not available for T5 14W and 24W lamps
1U3.71 0 0Mounting type Optic Ballast Lenght Direct lamp
powerSpot power Fixture type Color
USE THIS CHART FOR INDIVIDUAL FIXTURES ONLY, FOR CONTINUOUS RUNS SEE SWORD LINE.
1. Body:Made from extruded aluminium profile with polycarbonate end-caps; white or silver grey color (powder coated)
2. Control gear:Electronic ballast (universal voltage 120/277V or 347V) or dimmable ballast (1-10V, ECO system, Hi-Lume 3D). Ballasts are mounted on gear tray enabling easy access
3. Lamps:Double T5 or T5 HO in cross-section. Staggered lamps for 4 or more lamps only for GL and PR diffuser versions. Fixture lengths and lamping are as noted on next page (consult factory for other lengths)
4. Optics:Specular/mirror or satin silver-coated aluminium optics with excellent glare control, blades closed on top, optics stay hooked on during maintenance, anti-dust protection stretch film; for details see following pages
5. Diffuser:Micro-prismatic (PR) or opal blend (GL) made of polycarbonate, glow wire test 850°C
6. Holder for recessed installation:Provided by Intra lighitng
Double (longitudinal and transverse) parabolic louver, highly specular silver coated aluminium, high efficency and anti-iridescence, blades closed on top, spring fastening
Double (longitudinal and transverse) parabolic louver, satin silver coated aluminium high efficency and anti-iridescence, blades closed on top, spring fastening
Polycarbonate opal blended diffuser, glow-wire test 850°C
Polycarbonate micro-prismatic diffuser, glow-wire test 850°C
Satin aluminium asymetri-cal parabolic reflector, anti iridescence
