SY
ST
EM
5
Product Catalog
WHAT IS CHICK WORKHOLDING?
Efficiency Through Workholding Innovation.
Part Change Efficiency
Set Up Efficiency Tool Change Efficiency
Ease Of Use Efficiency
WORKHOLDING DESIGNED FOR YOUR MACHINING CENTER
Chick has taken the work out of choosing workholding for your
machine by designing Workholding Packages specifically for your
vertical or horizontal machining center. Every Workholding Package
from Chick is designed to optimize your machining center’s work
envelope and ships complete with all necessary hardware required
for installation.
WORKHOLDING PACKAGES INCREASE YOUR EFFICIENCY WITH:
3
MOST POPULAR HORIZONTAL WORKHOLDING PACKAGESEach Workholding Package is designed for your machine with all of the corresponding hardware and interface equipment that makes efficiency as simple as putting your package on your machine and making parts.
Kitamura HX-300iFHaas EC-400
Doosan Infracore DHP 4000 Haas EC-300 Kitamura HX-400iF Makino A-61
Makino A-51 Mori-Seiki NH-4000 Mori-Seiki NH-5000 Okuma MA-400
5HP-DAEW-00049 5HP-HAAS-00016 5HP-KITA-00035 5HP-MAKI-00021
5HP-MAKI-00039 5HP-MORI-00066 5HP-MORI-00077 5HP-OKUM-00057
Additional Workholding Packages are available for these and other
Matsuura H+300Mazak HCN 5000
5HP-KITA-000345HP-HAAS-00025 5HP-MATS-000585HP-MAZA-00048
MOST POPULAR VERTICAL WORKHOLDING PACKAGESEach Workholding Package is designed for your machine with all of the corresponding hardware and interface equipment that makes efficiency as simple as putting your package on your machine and making parts.
Doosan Infracore DMV 4020 Fadal VMC 3016 Haas VF-5 Haas VF-2
Haas MiniMill Hurco VM-1 Mori-Seiki NV-5000B Okuma MCV 4020
5VP-DAEW-00044 5VP-FADA-00039 5VP-HAAS-00101 5VP-HAAS-00192
5VP-HAAS-00218 5VP-HURC-00002 5VP-MORI-00088 5VP-OKUM-00037
Additional Workholding Packages are available for these and other
5VP-FADA-000245VP-HAAS-00198 5VP-MAZA-00063 5VP-ROBO-00021
5
Fadal VMC 4020Haas VF-3 Fanuc RoboDrill MateMazak Nexus 510C
simplifies designing, cataloging, and utilization of your fixtures, providing consistency and repeatability to your
VERTICAL WORKHOLDING
Precision ground cast iron to 35mm thick.
work envelope.
The perfect solution for repeat fixture setups.
6
Due to the variety of machines, please contact CHICK to obtain
050-0001 050-0002
AC
CES
SOR
IES
strength aluminum blocks that are machined into a dedicated
for designing component modular
repeatability.
shoulder that provides precisionrepeatability when using
modular fixturing components.
FOUNDATION DESIGN
system to simplify building and cataloging of fixtures.
FIXTURE MOUNTING HOLES
Each hole within the
for bolt down. These holes are sealed with patented chip plugs preventing the build up of chips.
MACHINE INTERFACE MOUNTING HOLES
Customized for each machining center. The hardware necessary to
your table is included.
7
Take advantage of the dual station clamping benefits thus increasing productivity twofold and amortizing tool change time. Select a base of either high strength aluminum or cast iron and design your fixturing from there. CHICK’s wide variety of QwikChange™ accessories
flexible system in the industry.
VERTICAL WORKHOLDING
Qwik-Loks are most efficient when machining on one or opposing part sides.
All dimensions and systems include standard jaws.
Dual Station Single Station
Holding Capacity
Length Width
Height
Nested Subplates
1040 Qwik-LokAluminum Base 5QL1040-AL
Cast Iron Base 5QL1040-CI
1550 Qwik-LokAluminum Base 5QL1550-AL
Cast Iron Base 5QL1550-CI
0525 Qwik-Lok081-1205
1030 Qwik-Lok5QL1030-AL
1540 Qwik-Lok5QL1540-AL
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum RecommendedTorTT que Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum RecommendedTorTT que Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum RecommendedTorTT que Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum RecommendedTorTT que Clamping Force
0520 Qwik-Lok081-1200
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum RecommendedTorTT que Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
Maximum
Maximum RecommendedTorTT que Clamping Force
QwikChangeTM Accessories Mounting Accessories
VERTICAL WORKHOLDING
Indexer Subsystem (ISS) is most commonly used when fractional degree indexing is required.
All dimensions and systems include standard jaws. Indexer not included. Additional center height is available with riser blocks.
Dual Station Single Station
Holding Capacity
Obtain the benefits of a horizontal CNC machine on a vertical CNC machine, by using CHICK’s Indexer Subsystem package
The ISS gives you the ability to machine on multiple part sides with only one clamping, therefore decreasing the cycle time and increasing accuracy of your part.
Length
Height
Sold Separately
QwikChangeTM Accessories Mounting Accessories
1040 6 Sided ISS5IS1040-61
1040 4 Sided ISS5IS1040-41
1550 4 Sided ISS5IS1550-41
0520 (X2) 4 Sided ISSISS-082-4202
0525 4 Sided ISSISS-082-4201
All Indexer Subsystems are compatible with CHICK’s
If you don’t find the product you are looking for here, select a
Maximum
Maximum Recommended
Maximum
Maximum Recommended
Maximum
Maximum Recommended
Maximum
Maximum Recommended
Maximum
Maximum Recommended
11
Take the Indexer Subsystem concept a
the Y axis, thus providing usable space
Included with the purchase of any
and factory installation by CHICK.
VERTICAL WORKHOLDING
Pneu-Dex is the optimal solution for your machine, combining all of the following features into one footprint:
All dimensions and systems include standard jaws. Additional center height is available with riser blocks.
VERTICAL WORKHOLDING
Dual Station Single Station
Holding Capacity
Len
gth
Hei
gh
t
Width
QwikChangeTM Accessories Mounting Accessories
1040 4 Sided Double Pneu-Dex
5PD1040-41-02
1040 4 Sided Triple Pneu-Dex
5PD1040-41-03
0525 4 Sided Double Pneu-Dex
MPD082-4201-2
0520 (X2) 4 Sided Double Pneu-Dex
MPD082-4202-2
0520 (X2) 4 Sided Triple Pneu-Dex
MPD082-4202-3
Maximum
Maximum Recommended
Maximum
Maximum Recommended
Maximum
Maximum Recommended
Maximum
Maximum Recommended
Maximum
Maximum Recommended
If you don’t find the product you are looking for here, select a
available.
13
HORIZONTAL WORKHOLDING
4 Sided Multi-Loks are the most versatile products of their kind.
of your horizontal CNC machine by providing the accessibility of three part
cycle time and increasing the accuracy of your part.
All dimensions and systems include standard jaws.
Dual StationSingle Station
Holding Capacity
SwingDiameter
Width
Hei
gh
t
1030 4 sided Multi-Lok5ML1030-41
1040 4 sided Multi-Lok5ML1040-41
1540 4 sided Multi-Lok5ML1540-41
1550 4 sided Multi-Lok5ML1550-41
0520 4 sided Multi-Lok082-4200
0525 4 sided Multi-Lok082-4201
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
QwikChangeTM Accessories Mounting Accessories
15
6 Sided Multi-Loks are most commonly used with applications requiring high volume production.
and versatility of six complete dual station workspaces in one compact footprint maximizing the quantity of parts presented to the spindle.
HORIZONTAL WORKHOLDING
All dimensions and systems include standard jaws.
Dual StationSingle Station
Holding Capacity
SwingDiameter
Hei
gh
t
Width
16
QwikChangeTM Accessories Mounting Accessories
1030 6 sided Multi-Lok5ML1030-61
1040 6 sided Multi-Lok5ML1040-61
1540 6 sided Multi-Lok5ML1540-61
1550 6 sided Multi-Lok5ML1550-61
0520 6 sided Multi-Lok082-6200
0525 6 sided Multi-Lok082-6201
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
17
Specialty Multi-Loks are the perfect solution for small part applications or machines with a limited work envelope.
specific applications in mind. CHICK
for small part applications or machines with a limited work envelope, without sacrificing the simplicity and flexibility of the System 5 product line.
application in mind!
HORIZONTAL WORKHOLDING
Dual Station
All dimensions and systems include standard jaws.
Single Station
Holding Capacity
SwingDiameter
Width
Hei
gh
t
QwikChangeTM Accessories Mounting Accessories
0520 (x2) 6 sided Multi-Lok082-6202
0520 (x2) 4 sided Multi-Lok082-4202
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
12 & 16 Station Multi-Loks provide the flexibility of being able to hold one extremely large part over multiple stations or clamping multiple average sized parts.
is designed to hold large parts while maximizing the efficiency of your machine. No need to waste time completely switching fixtures. Simply,
machining envelope and change your setups in minutes.
HORIZONTAL WORKHOLDING
All dimensions and systems include standard jaws.
Every 12- and 16-Station Multi-Lok must be shipped with a baseplate.
For Baseplate information, see pages 32-33.
Width
Dual StationSingle Station
Holding Capacity
Swing Diameter
Hei
gh
t
Width
16Station Station
QwikChangeTM Accessories Mounting Accessories
1550 12 Station Multi-Lok5ML1550-41-12
1550 16 Station Multi-Lok5ML1550-41-16
1040 12 Station Multi-Lok5ML1040-41-12
1040 16 Station Multi-Lok5ML1040-41-16
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
Dimensions mm (inch)
Weight kg (lbs)
MaximumHolding Capacity mm (inch)
Maximum Recommended Torque Clamping Force
ONE SYSTEM ENDLESS OPPORTUNITIES
Chick Workholding was designed with flexibility in mind!
Maximize your productivity and drastically reduce your repeat setup time, thereby unleashing milling profitability.
ACCESSORIES (QWIKCHANGE™)
GRIPPERS
Ideal for workpieces that require aggressive clamping
Dual Station Set
Single Station Set
Dual Station Machinable Jaw Sets
Ideal for holding one large
Standard
Wide
High
Oversized
Single Station Machinable Jaw Sets
Ideal for holding numerous small parts or parts that are difficult to clamp.
Machinable Faceplates
Jaw Carrier Sets
Standard
Wide
High
Oversized
Standard
Wide
High
Oversized
Ideal for holding two or four
Ideal for clamping a variety of part sizes.
Conversion Faceplates6 Systems
Select from a wide variety
accessories:
DUAL STATION
Sets clamp with an equal and opposing inward force, thus eliminating the potential for jaw lift. The safe low profile jaw interface maximizes the amount of machinable area, giving the ability to hold larger parts.
Machinable accessories are the optimal
height and width is suitable for most applications. CHICK has designed wide, high and oversized accessories to provide a cost effective solution for those unique applications.
ACCESSORIES (QWIKCHANGE™)
Standard Jaw SetDual Station Machinable
High Jaw SetDual Station Machinable
Wide Jaw SetDual Station Machinable
Oversized Jaw SetDual Station Machinable
B C B
A
D
E E
*Max Holding Capacity
Size
B C B
A
D
E E
*Max Holding Capacity
Size
B C B
A
D
E E
*Max Holding Capacity
Size
B C B
A
D
E E
*Max Holding Capacity
Size
Set includes:
Set includes:
Set includes:
Set includes:
Order No.
System Sizes0520 and 0525
Dimensions
A
C
D
E
1030 and 1040 1540 and 1550
Order No.
Dimensions
A
C
D
E
Order No.
Dimensions
A
C
D
E
Order No.
Dimensions
A
C
D
E
NOT
IN
NOT
IN
080-2500 080-2505
080-2502 080-2506
5DS1040-10-40
5DS1030-10-40
5DS1550-15-50
5DS1540-15-50
5DS1040-10-55
5DS1030-10-55
5DS1550-15-70
5DS1540-15-70
5DS1040-15-40
5DS1030-15-40
5DS1550-20-50
5DS1540-20-50
5DS1040-15-55
5DS1030-15-55
5DS1550-20-70
5DS1540-20-70
SINGLE STATION
increase the flexibility of your system by eliminating the need to completely switch fixtures for jobs requiring greater holding capacity. Simply QwikChangeTM the jaws
Machinable accessories are the
The standard height and width
is suitable for most applications.
CHICK has designed wide, high and
oversized accessories to provide
a cost effective solution for those
unique applications.
ACCESSORIES (QWIKCHANGE™)
Standard Jaw SetSingle Station Machinable
High Jaw SetSingle Station Machinable
Wide Jaw SetSingle Station Machinable
Oversized Jaw SetSingle Station Machinable
Set includes:
Set includes:
Set includes:
Set includes:
B B
A
E
D
C
*Min Holding Capacity
Size
*Max Holding Capacity
B B
A
E
D
C
*Min Holding Capacity
Size
*Max Holding Capacity
*Max Holding Capacity
*Max Holding Capacity
B B
A
E
D
C
*Min Holding Capacity
Size
B B
A
E
D
C
*Min Holding Capacity
Size
*CHICK provides a variety of coverplates for extended travel. Contact CHICK for additional information.
Order No.
System Sizes0520 and 0525
Dimensions
A
C
D
E
1030 and 1040 1540 and 1550
Order No.
Dimensions
A
C
D
E
Order No.
Dimensions
A
C
D
E
Order No.
Dimensions
A
C
D
E
NOT
IN
NOT
IN
082-2580 080-2580
080-2582 080-2582
5SS1040-10-40
5SS1030-10-40
5SS1550-15-50
5SS1540-15-50
5SS1040-10-55
5SS1030-10-55
5SS1550-15-70
5SS1540-15-70
5SS1040-15-40
5SS1030-15-40
5SS1550-20-50
5SS1540-20-50
5SS1040-15-55
5SS1030-15-55
5SS1550-20-70
5SS1540-20-70
QwikChangeTM dedicated fixturing for those awkward parts that are too difficult to clamp. A mini pallet changer can be created by utilizing
Machinable accessories are the optimal
height and width is suitable for most applications. CHICK has designed wide, high and oversized accessories to provide a cost effective solution for those unique applications.
ACCESSORIES (QWIKCHANGE™)
Standard Faceplates
High Faceplates
Wide Faceplates
Oversized Faceplates
www.ChickWorkholding.com.
B
A
C
B
A
C
B
A
C
B
A
C
Order No.
System Sizes0520 and 0525
Dimensions
A
C
1030 and 1040 1540 and 1550
Order No.
Dimensions
A
C
Order No.
Dimensions
A
C
Order No.
Dimensions
A
C
NOT
IN
NOT
IN
080-2621 080-2625
080-2622 080-2626
5FP1040-10-40
5FP1030-10-40
5FP1550-15-50
5FP1540-15-50
5FP1040-10-55
5FP1030-10-55
5FP1550-15-70
5FP1540-15-70
5FP1040-15-40
5FP1030-15-40
5FP1550-20-50
5FP1540-20-50
5FP1040-15-55
5FP1030-15-55
5FP1550-20-70
5FP1540-20-70
workholding flexibility by offering TM
the jaws and your modern workholding
metric as Single Station, Single Station Deluxe and Dual Station Sets for CHICK’s
ACCESSORIES (QWIKCHANGE™)
*The Holding Capacity dimensions are calculated using Hard Jaws dimensional
information to make adjustments.
Dual Station Set
Single Station Deluxe Set
Single Station Set
B
D
A
E
G
F
C
H
*Short Holding Capacity
Size
*Long Holding Capacity
C
A
DB
E
*Holding Capacity
Size
A
DB
CB
E E
Dual Station Size
*Dual Station Holding Capacity
Set includes:
*
Set includes:
*
Set includes:
*
System Sizes1040 and 1550
Dimensions
A
C
D
Holding Capacity
E
Dimensions
A
C
D
Holding Capacity
E
Order No.
Dimensions
A
C
D
E
Holding Capacity
G
H
5JC1550-SS-IN
5JC1040-SS-IN
Order No. 5JC1550-XS
5JC1040-XS-IN
Order No. 5JC1550-DS
5JC1040-DS-IN
5JC1550-XS-IN
5JC1550-DS-IN
for details contact CHICK.
These steel hard jaws are perfect for one part
CHICK’s jaw carriers and the system is ready to go.
Hard Jaws
1040 Workholding Systems
Order No. JH4STD
Dimensions mm (inch)
1550 Workholding Systems
Order No. JH6STD
Dimensions mm (inch)
Height
Thick
Width
31
GRIPPERS
Thickness
Length
Width
Length
Height
Width
Height
Length WidthHolding Capacity
Dimensions include standard dual station
Maximize your flexibility with the
manufacturer’s required to machine a variety of part sizes. Conversion
GRIPPERSCHICK Grippers are ideal for heavy machining applications in which fixture wear is a major concern. The hardened steel surface provides a clamping interface that eliminates wearing caused by rough cast irons, tool steels, or other hard metals. The CHICK Grippers also increase the holding power of your
into the part, for more aggressive workpiece clamping.
ACCESSORIES (CONVERSION FACEPLATES AND GRIPPERS)
GRIPPERS
Dimensions
Chick Gripper Plain
Chick Gripper Serrated
Gripper #5 Gripper #6Gripper #3 Gripper #4
15mm x 15mm x 5mm
1540
1550
1030
1040
Vertical Conversion Faceplates
Ideal for HMC’s and other indexable fixtures
Horizontal Conversion Faceplates
Ideal for High Density fixtures
Length
Width
Height
Holding Cap
5CF1030-20-06H6 Systems Order No.
5CF1040-20-08H
5CF1540-20-08H
5CF1550-20-10H 5CF1550-20-02V
5CF1040-20-02V
5CF1540-20-02V
Length
Width
Height
Holding Cap
Length
Width
Height
Holding Cap
Length
Width
Height
Holding Cap
33
MOUNTING
ACCESSORIES
Complete fixturing change over in minutes. Take advantage of CHICK’s Round and Diamond Pin Set for location and then bolt the system in place.
Select the appropriate Locating Keys and a set of Toe Clamps to
table.
additional mounting option— The Nested Subplate—which gives
A
B
C
Round and Diamond Pin Set
Round and Diamond Pin Sets
systems require an adapter
A
A
B1
Toe Clamps
CHICK Toe Clamps (four per TT
and most secure means of
are designed to be used with
head cap screws.
B1
B2
Locating Keys
Locating Keys (two keys
positive location when
keys utilize a ball lock mechanism to fasten on to
bases.
B2
Order No. Width
MKE16 16mm
WIDTH
Nested Subplates
C
QwikChangeTM
Subplate and mount the Subplate to either
Order No. 083-2305
System Sizes0520 and 0525
Dimensions
Length
Depth
Height
083-2505
Height
Depth
Length
35
www.ChickWorkholding.com