10
www.commscope.com SYSTIMAX ® InstaPATCH ® Plus Connectivity System Solution Guide
www.commscope.com
SYSTIMAX® InstaPATCH® PlusConnectivity System
Solution Guide
Enterprises are faced with a growing need for higher bandwidth coupled with highflexibility in their infrastructures to support such applications as Storage Area Networks,Network Attached Storage, and high performance computing.
Data Centers (DCs), in particular, are an important application for high performanceconnectivity. Organizations are building DCs to offer high performance server hosting,data storage and secure, redundant business backup. These centers are devoted toproviding a secure and reliable environment for large numbers of application serversand storage devices. With extreme service reliability being a trademark of theseinstallations, DCs must be addressed with high quality cabling solutions that allow high-density and ease of use and deployment.
Infrastructure solutions must allow for:
• Operational reliability
• Quick changes, including additions and rapid expansion
• High performance with migration path to future technologies
• High-density
• Cost effective deployment and installation
When evaluating cost effectiveness of solutions, always think in terms of cost over the lifeof the infrastructure, rather than only the initial installation cost. The lowest product cost isnot always the most effective solution in the long run. Choose the right system the first time.
Data center considerations should include the following:
• Initial installation cost: ensuring it covers adequately the specification to avoid unwantedextras and performance restrictions
• Administration: the network’s ability to be easily and inexpensively reconfigured
• Future: the ability to support ever increasing bandwidth and data rates in the future
• Maintenance: the effort required to keep the system operating
• Life cycle value: the assurance of a warranty covering the applications and hardware
High-Density LC Module
Modular Shelf
InstaPATCH® Plus Module
Male MPO (pinned) and Female MPO (no pins) Connectors
4
SYSTIMAX® InstaPATCH® Plus Connectivity System Solution Guide
www.commscope.com
CommScope, through its SYSTIMAXbrand, has pioneered the developmentof intelligent data center solutions thatoffer real-time efficiencies, positivelyimpacting network security, ITproductivity and ultimately, businesssuccess. By implementing theseintelligent solutions, enterprises canincrease network uptime, improveinfrastructure management and monitornetwork connections, allowingenterprises to more efficiently manageand safeguard its most valuable asset –information.
The drivers for data center fiber opticconnectivity include:
• A need to efficiently migrate to speedsabove 1 Gb/s and 10 Gb/s
• A need to quickly and easily configurework group networks (especially in datacenters)
• A need to most efficiently supportmultiple connectivity technologies(Single-mode/Multimode, LC/SC/ST)
• High security, high electromagnetic field,high lightning strike, or corrosiveenvironments
• High density, installation-time sensitiveenvironments
• Large, overcrowded cabinets and racks
• A need to increase control over networkoperations
• A need to reduce recurring operationalcosts
The Solution to Data Center OpticalInfrastructure NeedsCommScope, through its SYSTIMAX brand,brings the ultimate in fiber optic technologyto the Enterprise customer. CommScope’s40-year heritage in fiber optic solutionsenables us to deliver a complete portfolioof products for the physical layer of thenetwork. CommScope supports thedeployment of multimode and/orsinglemode fiber in the backbonesegments of data centers, with it’sTeraSPEED® ZWP single-mode LazrSPEED®
laser-optimized multimode andOptiSPEED® multimode solutions.
SYSTIMAX® InstaPATCH®
Plus Fiber System The SYSTIMAX InstaPATCH Plus Systemfeatures a high density, factory terminated,factory tested, modular fiber connectivitysolution that allows installers to simply andquickly connect system componentstogether. This modular system approachenables up to 96 fibers to be ready forservice in the time it takes to make a singlefiber connection with traditional systems.
Developed by CommScope Labs, theInstaPATCH® Plus System is designed tosupport locations, such as data centers, thatrequire high-density, rapid deployment andhigh performance. The InstaPATCH® PlusSystem incorporates SYSTIMAX LazrSPEEDmultimode, OptiSPEED multimode andTeraSPEED single-mode fiber technologiesto support today’s most demandingapplications, while allowing easy migrationto the next generation technology.
The InstaPATCH® Plus System includespre-terminated hardware, pre-terminatedbackbone trunk cables, ruggedized MPO-single fiber fanout patch cords, array cordsand standard fiber patch cords. TheInstaPATCH® Plus System utilizes onecommon module, one common ruggedfanout, one common array cord andstandard fiber patch cords, and retains thefull benefits of easy installation and systemadministration, while maintaining a futureupgrade path to parallel connectivity. Nospecial polarity components are required.Moreover, the InstaPATCH® Plus Systemfeatures an improved labeling system thatis accurate and logical when positioned infour orientations, affording more flexibility indesign, installation, and application.
The InstaPATCH® Plus pre-terminatedhardware is offered in two configurations.The high-density series featurespre-terminated 96 LC, 48 LC and 48 SCmodules with up to twice the density oftraditional modules. High-density modulescan be mounted into G2 1U shelves whichprovide slack storage for trunk cable andcable entry features for strain relief. Themodular series features interchangeable 24and 12-fiber LC, and 12-fiber SC and STmodules in two distinct mountingarrangements to provide design andservice flexibility.
Pre-terminated with MPO connectors andoffered in customer-specified lengths, theInstaPATCH® Plus backbone trunk cablesare offered in 12-, 24-, 48-, 72-, 96-, and144-fibers. Solutions supported:
• LazrSPEED 550
• LazrSPEED 300
• LazrSPEED 150
• OptiSPEED
• TeraSPEED
SYSTIMAX® InstaPATCH® Plus Connectivity System Solution Guide
5
www.commscope.com
The SYSTIMAX InstaPATCH® Plus System isdesigned to simplify the selection, designand deployment of the fiber opticinfrastructures required in data centerenvironments. To optimize product selection,consider the following project requirements,then follow the simple ‘1-2-3’ steps todetermine the system that fits your needs.
To determine which of the SYSTIMAXInstaPATCH® Plus Systems is best for you,the following requirements should beconsidered:
The cabling architectures that arecommonly used for data center structuredcabling systems, require a mix of high-density, high reliability, high performance,with flexible design guidelines, speed ofinstallation, future-ready and easy to use.
The following must be considered andprioritized:
• The sophistication of the networkapplications
• The kind of traffic expected on thevarious portions of the data centernetwork based on number of users, datatransfer requirements of each user, LAN architecture, etc.
• The life expectancy of the network andcabling infrastructure
• The frequency of moves and changes
• The growth potential of the network overits expected life
• Any adverse physical conditions in thecustomer’s data center
• Any access restrictions whether physicalor time related
The design, architecture and specificationof the fiber optic infrastructure shouldinclude the following:
• Outlet density and presentation required
• Resilience
• Patch/jumper density
• Wiring closet/space requirements
• Media selection – single-mode and/ormultimode
• Media considerations - performance,physical hazards
• Manufacturer’s support and warranty
• Cable containment including containmenttypes (trunking, ducts, cable tray), andcontainment design (size, safety,segregation)
• Installation techniques and quality
• Adherence to standards
• Labeling, records and documentation
• Testing and certification
• Maintenance and services
Features and Benefits• Supports LazrSPEED applications up to
550 meters, and TeraSPEEDapplications beyond
• 60% increase in bandwidth due to ZeroWater Peak in the E-band (1400 nmwindow) in single-mode applications
• Single-mode components capable ofsupporting data and video applications.
• All modules are based on LazrSPEED300 or TeraSPEED fibers to provideheadroom for future system upgrades
• Factory terminated and tested cableand apparatus for instant fieldconnections with guaranteed qualityand performance
• 12-fiber MPO connector based modulardesign enables simple connections
• Up to 96% savings in installation timefor 96 LC connections
• Up to 50% savings in space due to theincreased density
• Designed for administrative convenience- guaranteed transmit-to-receiveconnectivity
• No special polarity components – singlemodule design, standard patch cords
• Easy upgrade path to parallel connectivityand associated applications
• Supports easy reconfiguration formoves, adds and changes
• Improved fiber patch cord managementand improved labeling capabilities
• Automatic shutter for LC adapters
• Developed by CommScope Labs andbacked by the best-in-industrySYSTIMAX warranty
• Provides opportunities for lower totalinstalled system cost (material plus labor)
InstaPATCH® Plus System Selection Guide
1-2-3Configuration as easy as ‘1-2-3’
The steps on the following pages have been designed toguide you to the appropriate product selection
Step 1 – Select modules and/or shelf type
Step 2 – Select pre-terminated trunk cables
Step 3 – Select the equipment cables
InstaPATCH® PlusSystem Front View
InstaPATCH® Plus System Rear View
SYSTIMAX® InstaPATCH® Plus Connectivity System Solution Guide
www.commscope.com
STEP 1 - SELECT INSTAPATCH® PLUS MODULES AND/OR SHELF TYPE
DM2 24 LC Modules
G2 4U Shelf
MP-1U Panel
SYSTIMAX InstaPATCH® Plus LazrSPEED 96 LC High Density Module
The tables below show the capacity for each InstaPATCH® Plus shelf type based on connector selection and height option.
Select shelf type based modular or high-density capacity and select appropriate number of modules
Factory terminated Module Ordering Information
Material ID Description Product Code
760039685 24, LC LazrSPEED Multimode Module DM2-24LC-LS
760044818 24, LC OptiSPEED Multimode Module DM2-24LC-MM
760039701 24, LC TeraSPEED Single-mode Module DM2-24LC-SM
760039727 12, LC LazrSPEED Multimode Module DM2-12LC-LS
760044826 12, LC OptiSPEED Multimode Module DM2-12LC-MM
760039743 12, LC TeraSPEED Single-mode Module DM2-12LC-SM
760039768 12, SC LazrSPEED Multimode Module DM2-12SC-LS
760044834 12, SC OptiSPEED Multimode Module DM2-12SC-MM
760039784 12, SC TeraSPEED Single-mode Module DM2-12SC-SM
760039800 12, ST LazrSPEED Multimode Module DM2-12ST-LS
760044842 12, ST OptiSPEED Multimode Module DM2-12ST-MM
760039826 12, ST TeraSPEED Single-mode Module DM2-12ST-SM
760056077 8 MPO Adapter Panel DP-8MPO
760034280 6 MPO Adapter Panel DP-6MPO
760015412 2 MPO Adapter Panel DP-2MPO
760016063* Blank Panel for InstaPATCH Panels/Shelves, 6/pk Blank Panel
*LC LazrSPEED and TeraSPEED DM2 modules also available in 6 packs. Contact your local CommScope representative for ordering information.
Modular Shelf Series
Connection Type 1U Modular Panel/Shelf Installation Type 2U 4U Modular ShelfModular Shelf
LC 72 144 288
SC 36 72 144
ST 36 72 144
Ordering Information
Material ID Description Product Code
760013458 1U Modular Panel, Supports 3 DM2 Modules (not included) MP-1U
760055467 1U Modular Shelf, Sliding, Supports 3 DM2 Modules (not included) 600G2-1U-IP-SD
760055475 1U Modular Shelf, Fixed, Supports 3 DM2 Modules (not included) 600G2-1U-IP-FX
760066084 1U Modular Shelf, Internal Sliding, Supports 3 DM2 Modules (not included) 600G2-1U-IP-IS
760066332 2U Modular Shelf, Sliding, Supports 6 DM2 Modules (not included) 600G2-2U-IP-SD
760026245 4U Modular Shelf, Sliding, Supports 12 DM2 Modules (not included) 1000G2-4U-IP-SD
760050872 4U Modular Shelf, Fixed, Supports 12 DM2 Modules (not included) 1000G2-4U-IP-FX
High Density Series
Installation Connection MaximumType Type Capacity
High-Density Module LC 96SC 48
Ordering Information
Material ID Description Product Code
760057646 96 LC, LazrSPEED Mulitmode, High Density Module DM2-96LC-LS
760057653 96 LC, OptiSPEED Mulitmode, High Density Module DM2-96LC-MM
760057661 96 LC, TeraSPEED Single-mode, High Density Module DM2-96LC-SM
760057703 48 LC, LazrSPEED Mulitmode, High Density Module DM2-48LC-LS
760057711 48 LC, OptiSPEED Mulitmode, High Density Module DM2-48LC-MM
760057729 48 LC, TeraSPEED Single-mode, High Density Module DM2-48LC-SM
760057679 48 SC, LazrSPEED Mulitmode, High Density Module DM2-48SC-LS
760057687 48 SC, OptiSPEED Mulitmode, High Density Module DM2-48SC-MM
760057695 48 SC, TeraSPEED Single-mode, High Density Module DM2-48SC-SM
760033928 600G2-1U-UP-FX, Fixed Shelf, Supports 1 HD Module 600G2-1U-UP-FX
760033936 600G2-1U-UP-SD, Sliding Shelf, Supports 1 HD Module 600G2-1U-UP-SD
MODULAR SERIES
HIGH-DENSITY SERIES
SYSTIMAX® InstaPATCH® Plus Connectivity System Solution Guide
STEP 1 - SELECT INSTAPATCH® PLUS MODULES AND/OR SHELF TYPE CONTINUED
STEP 2 – SELECT PRE-TERMINATED TRUNK CABLES
Select appropriate cable code from ordering information tables based on cable preference, and specify customized cables code
including length as per cable configurator.
UOMF Foot
M Meter
Length001 -xxx
Number ofEnds
J 12 Fiber IPDD 24 Fiber IPDK 36 Fiber IPDE 48 Fiber IPDF 72 Fiber IPDG 96 Fiber IPDH 144 Fiber IPD
Termination End OneMP MPO Female (no pins)
Termination End TwoMP MPO (female)
Fiber PatchCable
Fiber TypeH LazrSPEED 150 MultimodeZ LazrSPEED 300 MultimodeX LazrSPEED 550 Multimode
M OptiSPEED MultimodeW TeraSPEED Single-mode
Cordage Size6 multifiber subunit
loose tube cable (IPD)
Jacket TypeP Plenum (Std Color)E Plenum, with gripG Plenum, armored
W Plenum, with grip and armoredJ Plenum - No Cable Gland
H LSZH*Q LSZH, armored with grip*
S LSZH, armoredD LSZH, with grip*
V LSZH - No Cable Gland*
*LSZH not available in North America
The InstaPATCH-IPD trunk cablesThe InstaPATCH-IPD trunk cables feature a round cable construction which eliminates bendsensitivity allowing for easy routing and are offered in 12-, 24-, 48-, 72-, 96- and 144-fibers.The cables are constructed with multiple subunits, each with 12 fibers and are terminated onboth ends with MPO connectors.
All IPD cables can be ordered with or without a pulling grip and with or without a cable gland.
Pre-terminated Trunk CablesPosition 1
F2P
3C
4-
5A
6B
7B
8C
9C
10D
11E
12-
13F
14G
15-17H
*LSZH not available in North America
UOMF Foot
M Meter
Length001 - xxx
Termination End OneMP MPO Female (no pins)
Trunk Extensions
Fiber PatchCable
Position
Fiber TypeZ LazrSPEED 300 MultimodeX LazrSPEED 550 Multimode
M OptiSPEED MultimodeW TeraSPEED Single-mode
1F
2P
3C
4-
5A
6B
7B
8C
9C
10D
11E
12-
13F
14G
15-17H
Cordage Size6 multifiber subunitloost tube cable (IPD)
Jacket TypeP Plenum (Std Color)E Plenum, with grip
J Plenum - No Cable GlandH LSZH*
D LSZH, with grip*V LSZH - No Cable Gland*
Termination End TwoMX MPO (male)
Number ofEnds
J 12 Fiber IPDD 24 Fiber IPDE 48 Fiber IPDF 72 Fiber IPD
2
www.commscope.com
Material ID Description
760072231 UMBA-2 Universal Mounting Bracket Kit, accepts up to 3 modules
760074047 InstaPATCH® Plus In-line Adapter Housing MPO(f)-MPO(m)
ADDITIONALHOUSING OPTIONS
SYSTIMAX® InstaPATCH® Plus Connectivity System Solution Guide
www.commscope.com
STEP 3 – SELECT THE EQUIPMENT CABLESSelect fanout cables and/or cords to connect to equipment or for cross-connect
Length001 - xxx
Termination End OneMP MPO Female (no pins)
MX MPO Male (pins)LC LCSC SCST STII
Ruggedized Fanout Cables
Fiber PatchCable
Position 1F
2P
3C
4-
5A
6B
7B
8C
9C
10D
11E
12-
13F
14G
15-17H
Cordage SizeG Multi Fanout Cables 2 Foot BreakoutY Multi Fanout Cables 4 Foot BreakoutX Multi Fanout Cables 8 foot Breakout
Jacket TypeP Plenum (Std Color)
H LSZH
UOMF Foot
M Meter
InstaPATCH® Plus Ruggedized Fanout CablesThe InstaPATCH® Plus ruggedized fanout cables support thedirect connection to the equipment from the patch panel.Terminated with MPO connectors on one end and clippedduplex connectors (LC, SC or ST) on the other end, theruggedized fanout cables are available in 12-, 24-, 48- and72- fiber counts. Female MPO (MP - no pins) fanouts areutilized for connections to equipment from a DM2 module.Male MPO (MX - pinned) fanouts are utilized for connectionsto equipment directly from a trunk cable.
Unit ofMeasureF Foot
M Meter
Length001 - xxx
Fiber CountJ 12 Fiber IPD
Termination End One
MP MPO Female (no pins)
MX MPO Male (pins)
Termination End Two
MP MPO Female
MX MPO Male
LC LC
SC SC
ST STII
InstaPATCH® Plus Array Cord Configurator
Fiber PatchCord
Position
Fiber Type
Z LazrSPEED 300 Multimode
X LazrSPEED 550 Multimode
M OptiSPEED Multimode
W TeraSPEED Single-mode
1F
2P
3C
4-
5A
6B
7B
8C
9C
10D
11E
12-
13F
14G
15-17H
Cordage Size
S Array Patch Cord
E Array Patch Cod 96 inch Breakout
K Array Patch Cord 24 inch Breakout
Jacket TypeP Plenum (Std Color)
Array CordsArray cords can be terminated with either MPO connectors on both ends or MPOconnectors on one end and clipped duplex connectors (LC, SC, ST) on the other end.Different from ruggedized fanouts which include an outer sheath to protect the fiber onlonger runs between racks, array cords utilize 3.0 mm 12 fiber IPD cordage that is protectedwith aramid yarn for durability and allowing maximum flexibility within a rack/cabinet. MPOto MPO array cords are used for trunk extension, cross-connect applications or patching intoparallel transceivers or array equipment. Array cords with MPO to duplex connectors (LC,SC, ST) are used for directly connecting equipment to a trunk.
Termination End TwoLC LCSC SCST STII
Number ofEnds
J 12 Fiber IPDD 24 Fiber IPDK 36 Fiber IPDE 48 Fiber IPDF 72 Fiber IPD
Fiber TypeZ LazrSPEED 300 MultimodeX LazrSPEED 550 Multimode
M OptiSPEED MultimodeW TeraSPEED Single-mode
SYSTIMAX® InstaPATCH® Plus Connectivity System Solution Guide
8
www.commscope.com
STEP 3 – SELECT THE EQUIPMENT CABLES CONTINUED
Length001 - xxx
Termination End OneMP MPO Female (no pins)
MX MPO Male (pins)
Patch Cord Cables
Fiber PatchCable
Position
Fiber TypeX LazrSPEED Multimode
W TeraSPEED Single-modeM OptiSPEED Multimode
1F
2P
3C
4-
5A
6B
7B
8C
9C
10D
11E
12-
13F
14G
15-17H
Cordage Size2 1.6 mm Cord3 3.0 mm Cord
Jacket TypeR Riser (Std Color)
P Plenum (Std Color)
Termination End TwoLC LCSC SCST ST
UOMF Foot
M Meter
Number ofEnds
1 Simplex2 Duplex
ORDERING INFORMATION
Material ID Description Colors
760060541 InstaPATCH® Plus Pulling Grip Kit, 12 Fiber, black label
760060558 InstaPATCH® Plus Pulling Grip Kit, 24 Fiber, gray label
760060566 InstaPATCH® Plus Pulling Grip Kit, 48/72 Fiber, blue label
760060574 InstaPATCH® Plus Pulling Grip Kit, 96/144 Fiber, green label
Pulling Grips
Stand-alone pulling grip kits are also offered in four different sizes: one for 12 fibers, one for 24 fibers,one for 48 and 72 fibers, one for 96 and 144 fibers. The installer can order one pulling grip kit for every5 or 10 cables instead of ordering all trunk cables with pulling grips installed.
The InstaPATCH-IPD trunk cablesThe InstaPATCH-IPD trunk cables feature a roundcable construction which eliminates bendsensitivity allowing for easy routing and areoffered in 12-, 24-, 48-, 72-, 96- and 144-fibers.The cables are constructed with multiple subunits,each with 12 fibers and are terminated on bothends with MPO connectors.
All IPD cables can be ordered with or without apulling grip and with or without a cable gland.
SYSTIMAX Solutions Provides a CompleteFiber Connectivity Solution for Enterprise
Regardless of whether you choose to installmultimode, single-mode, indoor, outdoor,indoor/outdoor, ST/SC/LC, field or pre-terminated, SYSTIMAX Fiber ConnectivitySolutions provides the complete productsolution to meet even the most stringent ofapplication requirements in the enterpriseenvironment. The SYSTIMAX Fiber Solutionfamily includes a wide choice of cables,connectors, splices, patch panels andpatch cords.
The best components engineered togetherto maximize performance thus providingcustomers with a single source end-to-end"system solution", that means a singleaccountable point of contact for cablingsystem issues. All the approved SYSTIMAXproducts meet or exceed industrystandards. With SYSTIMAX Solutions youcan feel confident that you have made theright choice.
Typical Data Center
InstaPATCH® Plus Trunk Cables
InstaPATCH Trunk Extensions
InstaPATCH® Plus Modules
InstaPATCH® PlusRuggedized Fanout Cables
SYSTIMAX® InstaPATCH® Plus Connectivity System Solution Guide
© 2009 CommScope, Inc. All rights reserved.
Visit our Web site at www.commscope.com or contact your local CommScope representative or BusinessPartner for more information. All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.
This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to SYSTIMAX products or services.
07/09 MI-46-1
www.commscope.com
