page 1 www.guardiantactile.com

Integrated Tac les meet all safety requirements and can be incorporated into new or exis ng areas to aid the vision impaired.

Our advanced polymer is very durable ensuring long service life; we off er a 10 year guarantee on our Integrated Tac les.

• the Peel, Bond & Walk™ design can be installed and used immediately

• the self-adhesive cross linking polymer achieves permanent bond, even on undula ng surfaces

• for external applica ons, our fast curing primer is applied to the substrate prior to installa on

• integrated tac les will not peel, li , chip, crack or slip when correctly installed

• integrated tac les fully comply with Australian Standards AS/NZS 1428

Durable & UV ResistantIntegrated tac les are excep onally robust and stand up to Australia’s harsh outdoor condi ons. They are resistant to UV light and will not fade or discolour.

Versa leIntegrated tac les can be used both on new designs and retrofi ts to suit all applica ons. This includes:

car parks, bus stops, road crossings, kerbs, steps, entrance ways, intersec ons, stairways, escalators, fi re escapes, ramps, railway pla orms, walkways, passenger wharves, and much more

Guardian tac le indicators can be permanently installed onto any surface, including:

concrete, bitumen, mber, carpet, vinyl, rubber, plas c, les, marble, stone and brick paving

Integrated Tactiles

tactiles

10 year guarantee on Guardian Integrated Tac les

Guardian’s Integrated Tac les are a modular self-adhesive ground surface indicator system. They are specifi cally designed as a quick and easy installa on for indoor and outdoor use.

page 2

Premium QualityGuardian Tac les are manufactured with premium quality polyurethane and are not aff ected by temperature extremes.

The Peel, Bond & Walk™ system is also designed for small areas, where alterna ve materials such as concrete, les and ceramic are diffi cult to install.

Integrated tac les are available in a range of colours or can be custom made to suit your design requirements.

The elegant design makes them ideal for pres gious loca ons. Discrete tac les can be installed on various surfaces, including:

mber, les, marble, granite, terrazzo, concrete, carpet, vinyl and rubber

Discrete tac les are designed to stay in place for many years. There are various installa on op ons:

• sha design (drill and secure with an adhesive or plug system)

• fl at design (secure directly with an adhesive)

Discrete tac les are guaranteed for 5 years from installa on and comply with Australian Standards AS/NZS 1428.

Drilling and Loca ng TemplatesWe supply drilling and loca ng templates to assist with the installa on of discrete tac les.

Our drilling templates will guide the drill holes to 50mm centres, and loca ng templates will accurately align the tac les.

Luminance Contrast for TGSI’sThe choice of tac les may depend on the colour of the substrate.

• integrated tac les require a minimum luminance contrast of 30% with the amount of light refl ected from the path of travel

• discrete tac les require a minimum of 45% – 60% luminance contrast

Discrete Tactiles

5 year guarantee on Guardian Discrete Tac les

Guardian Discrete Tac les are manufactured from the highest quality marine grade 316 stainless steel; they are suitable for both indoor/outdoor applica ons.

page 3 www.guardiantactile.com

Guardian aluminium stair nosings are protected with a 15 micron anodised coa ng. Stair treads are available in full 5.8 meter lengths or supplied pre-cut and pre-drilled to your requirements.

Guardian aluminium non-slip stair nosings are available in 3 diff erent profi les:

• bullnose with a ramp back

• slimline with a ramp back

• slimline with a recessed back

We provide 2 types of stair nosing inserts: high quality polyurethane & premium silicon carbide.

Addi onal Features:

• extremely durable - full 5 year guarantee

• manufactured using high quality anodized aluminium

• waterproof and weatherproof against all kinds of condi ons

• bonding system adheres to all surfaces and eliminates metal vibra on

• hard wearing and cost eff ec ve solu on

• supplied pre-cut and pre-drilled to your requirements

• easy to install, with a long las ng & impact resistant fi nish

• complies with Australian Standards AS/NZS 1428

• fully stocked and available in 5.8 meter lengths

Aluminium NosingsGuardian Aluminium Non-slip Stair Nosings comply with all Australian safety standards whilst presen ng an aesthe c look for architectural design.

stair nosings

Bullnose with a Ramp Back (80 x 30mm)30mm

60mm8 12

10mm

60mm11 9

Slimline with a Ramp Back (80 x 10mm)

Slimline with a Recessed Back (75 x 10mm)10mm

60mm6 9

5 year guarantee on Guardian Aluminium Stair Nosing

* suitable for a 72mm recess

page 4

Fiberglass Nosings

Guardian fi berglass stair nosings off er a fast, permanent an -slip surface to the front edge to all types of stair surfaces, even in adverse condi ons such as the presence of water and oil.

They are available in two colours: safety yellow and black.

Addi onal Features:

• extremely durable – full 5 year guarantee

• waterproof and weatherproof against all kinds of condi ons

• an -sta c and non-slip surface even when wet, oily, greasy or dusty

• excellent chemical, UV, corrosion, acid and alkaline resistant material

• bonding system adheres to all surfaces and eliminates metal vibra on

• hard wearing with a tough grit for industrial applica on

• supplied pre-cut and pre-drilled to your requirements

• easy to install, with a long las ng & impact resistant fi nish

• will not discolour or fade over me

• fully stocked and available in 5.8 meter lengths

Guardian Fiberglass Stair Nosings are an ideal retrofi t system for all types of stairs in the Industrial, Mining and Marine sectors. Fibreglass nosings provide a very safe pla orm with their aggressive grip surface.

30mm

70mm

page 5 www.guardiantactile.com

Guardian’s safety tapes are by far the most durable on the market today. They are manufactured to the same standards and specifi ca ons as heavy duty industrial abrasive tapes making them outlast other non-slip tapes by up to 500%.

These premium non-slip safety tapes are designed for internal/external use and installed as a durable, slip resistant surface for a large variety of applica ons, such as:

trains, stairs, ramps, pla orms, boats, forkli s, work vehicles and much more

Antislip TapeGuardian’s heavy duty An slip Tapes are designed for the preven on of slips, trips and falls. The fast and simple installa on process makes them a versa le and economical solu on.

Premium quality, heavy duty wheel stops are designed for maximum durability. They are moulded from a tough recycled rubber compound and fi nished with a highly visible yellow hazard pa ern. Guardian fasteners are available for both concrete and bitumen surfaces.

Addi onal Features:

• more cost eff ec ve than tradi onal concrete wheel stops

• excep onally light weight and economical to transport

• easily handled and installed by a single person

• complies with Australian Standards AS2890.1

Wheel StopsGuardian Wheel Stops are the most economical way of providing a safe environment for public car-parks.

5 year guarantee on Guardian An slip Tape

2 year guarantee on Guardian Wheel Stops

page 6

Braille Signage

Braille signs are suitable for internal/external use and comply with the Building Code of Australia (BCA). Customised signs can also be designed to your requirements.

Braille signs are encapsulated within a white or black backing plate and include a self-adhesive for convenient installa on.

Guardian Braille Signs are moulded from a single piece of polycarbonate, crea ng a con nuous surface with embossed tac le elements.

10 year guarantee on Guardian Braille Signs

They specialise in Guardian products and work to the highest standards of workmanship, in-line with the quality of Guardian’s product range.

Guardian installa ons are provided with a warranty and comply with Australian Standards and the Disability Discrimina on Act.

Guardian Tac le Systems are renowned for their a er sales service; both in the installa on of products, and the ongoing follow-up to ensure complete customer sa sfac on. We also off er a full range of quota on services and on-site measurements.

Schedule an appointment with our friendly customer service team to ensure that all safety products are professionally installed by the experts.

Professional InstallationWe have a large team of professional in-house installers who work around the clock to suit your requirements.

T +61 8 9240 1888F +61 8 9240 1988E sales@guardiantac le.com

www.guardiantac le.com