TankJet Tank Cleaning Products, Catalog 15

Experts in Spray TechnologySpray

NozzlesSpray

ControlSpray

AnalysisSpray

Fabrication

TankJet® Tank Cleaning Products

1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com

Optimizing Tank Cleaning Operations

Optimizing Tank Cleaning OperationsChoosing the best way to thoroughly clean your tanks while minimizing use of costly chemicals, water and manual labor can be challenging. There are several things you can do to maximize the performance of your tank cleaning equipment. We’ve included optimization tips and guidelines in this bulletin to help you achieve optimal cleaning efficiency.

GeTTinG STarTed

If you are cleaning your tanks manually

Changing to an automated method will yield many benefits:

• More consistent, thorough cleaning

• Improved worker safety by removing contact with hazardous chemicals

• Faster cleaning – downtime is minimized and tanks are returned to service more quickly

• Reduced use of water, chemicals and lower wastewater disposal costs

• Workers can be deployed to other tasks

If you are currently using tank cleaning nozzles or a tank cleaning machine

You may be able to improve cleaning efficiency by making some simple changes or using different equipment. Technology advancements have made it easier to remove stubborn residues, shorten cleaning cycle times and achieve higher levels of automation.

The first step to optimizing tank cleaning is to audit your operations.

• How many tanks require cleaning and what is the diameter, length and height of each?

• Are there obstructions in your tanks such as agitators or mixers?

• Are there certain areas that need more cleaning than others such as skim lines?

• What residue needs to be removed? Is it sticky? Or is it easily rinsed away?

• Are cleaning agents required or is water sufficient? Is it necessary to heat the cleaning liquid?

• What problems are you experiencing with your current cleaning method?

Equipped with the answers to these questions, you should be ready to start evaluating your options.



SeleCTinG The riGhT equipmenTThe chart below shows all of our tank cleaning products and the maximum tank diameter each unit can clean. The maximum tank diameter is defined as the total distance the spray can travel to tank walls assuming the unit is positioned in the center of the tank. The closer the nozzle is to the tank wall, the greater the impact. The chart also shows recommended minimum tank diameters. It is possible to use some tank cleaners in smaller tanks than recommended, but consider the size of the unit and the liquid volumes.

Maximum Tank Diameter

Feet 0.5 1 2 3 4 5 6 7 8 9 10 12 14 16 18 20 30 40 50 60 70 80 90 100

Meters 0.2 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3 3.7 4.3 4.9 5.5 6.1 9.1 12 15 18 21 24 27 30

TankJet® 360/363

TankJet 180

TankJet AA290

TankJet AA190-HP5

TankJet 80

TankJet 65

TankJet AA190 and AA190H

TankJet 75

TankJet 27500 and 27500R

TankJet 12900

TankJet D26984

TankJet D40159


TankJet 63225

TankJet D41800E

TankJet 6353 and 6353-MFP

TankJet AA090

TankJet 18250A

TankJet 30473

TankJet D41892

TankJet D41990

TankJet 21400A

TankJet VSM

TankJet 23240

TankJet 3150

TankJet 36640

TankJet 15498

High Impact Cleaning

Medium Impact Cleaning

Low Impact Cleaning

Rinsing

up to 100’

up to 80’

up to 80’

up to 80’

up to 50’

up to 40’

up to 34’

up to 30’

up to 25’

up to 22’

up to 20’

up to 20’

up to 18’

up to 13’

up to 12’

up to 10’

up to 8’

up to 8’

up to 8’

up to 6.5’

up to 6.5’

up to 5’

up to 5’

up to 3’

up to 3’

up to 3’

up to 2’



SeleCTinG The riGhT equipmenTThe chart below shows all of our tank cleaning products and the maximum tank diameter each unit can clean. The maximum tank diameter is defined as the total distance the spray can travel to tank walls assuming the unit is positioned in the center of the tank. The closer the nozzle is to the tank wall, the greater the impact. The chart also shows recommended minimum tank diameters. It is possible to use some tank cleaners in smaller tanks than recommended, but consider the size of the unit and the liquid volumes.

Maximum Tank Diameter

Feet 0.5 1 2 3 4 5 6 7 8 9 10 12 14 16 18 20 30 40 50 60 70 80 90 100

Meters 0.2 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3 3.7 4.3 4.9 5.5 6.1 9.1 12 15 18 21 24 27 30

TankJet® 360/363

TankJet 180

TankJet AA290

TankJet AA190-HP5

TankJet 80

TankJet 65

TankJet AA190 and AA190H

TankJet 75


TankJet 12900

TankJet D26984

TankJet D40159


TankJet 63225

TankJet D41800E

TankJet 6353 and 6353-MFP

TankJet AA090

TankJet 18250A

TankJet 30473

TankJet D41892

TankJet D41990

TankJet 21400A

TankJet VSM

TankJet 23240

TankJet 3150

TankJet 36640

TankJet 15498

High Impact Cleaning

Medium Impact Cleaning

Low Impact Cleaning

Rinsing

Comparing the Options

Your final decision will be determined by tank size and level of cleaning required. However, here are a few more things to keep in mind as you work through the selection process:

High impact cleaning is required to remove stubborn residues such as layers of a dried substance. Tank cleaners in this category generally use high pressure and/or high flow and spin at slow rotational speeds to maintain high impact. Solid stream nozzles are used to maximize impact.

Medium impact cleaning is required when good impingement is needed to remove residues. Tank cleaners that provide medium impact generally use solid stream nozzles at medium flows and pressures. Rotational speed is slightly faster than high impact tank cleaners but much slower than free-spinning nozzles to ensure adequate impact on target areas.

Low impact cleaning is used for light cleaning when some impact is required. Low flow/medium pressure and high flow/low pressure nozzles are used to achieve low impact cleaning. These nozzles include rotating flat spray nozzles or stationary full cone types.

Rinsing is used when distributing cleaning solution throughout the tank without impact provides sufficient cleaning. Rinsing nozzles are typically free-spinning or stationary spray balls.

up to 100’

up to 80’

up to 80’

up to 80’

up to 50’

up to 40’

up to 34’

up to 30’

up to 25’

up to 22’

up to 20’

up to 20’



Six Key SpeCifiCaTiOn GuidelineS

Once you’ve determined which type of tank cleaner or nozzles may be suitable, there are a few other factors to evaluate to ensure you’re going to get the cleaning performance you need. Here are a few guidelines to keep in mind as you start to select a specific unit.

Spray distance

Spray distance, sometimes referred to as “throw”, is the distance between the spray exiting the nozzle orifice to the spray hitting the target surface. The spray coming from the nozzle should reach the walls of the tank vessel. Spray that reaches the tank surface may not clean heavily soiled areas. The spray loses impact the farther away it gets from the nozzle. Adequate pressure should be supplied to the nozzle to ensure the cleaning liquid is applied with enough impact to remove the residue.

Spray distance is usually expressed in terms of tank diameter. If your tank is 20 ft. (6 m) in diameter and 40 ft. (12 m) tall, understand that you will need two tank cleaners that can clean 20 ft. (6 m) or one that can clean up to 40 ft. (12 m).

Impact

The characteristics of the residue will determine how much impact is required to remove it. If you’re not sure, ask for assistance. We have impact data available for many products and decades of experience.

Keep in mind that you can increase impact by increasing flow rate or by increasing pressure. Increasing flow rate is far more effective. Doubling flow rate increases impact by as much as 100% while doubling pressure provides a 40% increase. However, the best approach is to select the tank cleaning product that has adequate impact to ensure optimal cleaning efficiency.

Relative Impact

Flow Rate Pressure Relative Impact

13 gpm (50 l/min)

45 psi (3 bar) 1.0

13 gpm (50 l/min)

90 psi (6 bar) 1.4

26 gpm (100 l/min)

45 psi (3 bar) 2.0

Another consideration is the effect of rotational speed on impact. Faster rotational speeds can compromise impact and efficiency. The spray rotates so fast that energy dissipates and the spray pattern deteriorates before it hits the tank surface. In some operations, you may be able to eliminate using hot water by increasing impact. This is dependent on the residue to be removed. Increasing impact instead of heating your cleaning solution can save thousands of dollars annually by decreasing energy costs.

20 ft. (6 m)

20 ft. (6 m)



Full Cone for Low-Impact

Flat Fan for Medium-Impact

Solid Stream for High-Impact

Flow rate

Operating at the lowest possible flow rate will help keep operating costs down. Less liquid, effluent for disposal and energy will be consumed. A general guideline is to use between 0.2 gal/min/ft2 (7 l/min/m2) and 0.4 gal/min/ft2 (15 l/min/m2). This guideline generally applies to stationary nozzles where all the surfaces of the tank are sprayed at the same time. Nozzles that rotate usually contact part of the tank at one time and can operate at lower flows.

Spray pattern

Solid stream sprays provide the greatest impact, followed by flat fan and full cone sprays.

Materials

Most tank cleaning nozzles are constructed of stainless steel because of its durability and resistance to high temperatures. For operations where corrosion is a concern, choose nozzles made of PTFE or PVDF. Make sure units with seals and o-rings are made of materials compatible with the cleaning solution.

Coverage

Spray coverage from tank cleaning nozzles range from 65° to 360°. You may need to use more than one nozzle to reach all areas of the tank especially if there is equipment in the tank such as a mixer or agitator.

Spray coverage

65° 240°

120° 260°

180° 270°

210° 360°



OpTimizinG perfOrmanCe

Keep tank cleaning nozzles and fluid-driven machines free of debris by using strainers

Particulates in the liquid can clog nozzles, stop rotation and cause inadequate cleaning. Filtering the liquid with line strainers can prevent clogging and extend the wear life of downstream equipment.

• For fine straining, woven wire mesh screens provide very small openings to strain particulates down to 200 mesh (74 microns)

• The mesh screen should be made of stainless steel for strength and corrosion resistance

• Be sure to keep an extra screen on hand for every strainer to ensure trouble-free operation

See our bulletin on strainers for recommendations on selecting strainers and mesh.

Ensure proper liquid flow by using lances

If fluid isn’t delivered efficiently and effectively to the tank cleaning device or the nozzle isn’t precisely positioned in the tank, cleaning performance will be compromised.

• Evaluate your lance requirements when specifying your tank cleaner or nozzle. Determine if a standard lance or custom lance is required. Consider a custom lance if you need to position nozzles so the spray impacts directly on heavily soiled areas or skim lines or require special connections, lengths or materials

• Working with a single supplier will ensure compatibility and eliminate connection problems

See our bulletin on lances for more information.



Improve cleaning by changing spray head position

Use an adjustable ball fitting to clean vessels in sections. Clean the top half of the vessel; then lower the device and clean the bottom half of the vessel and/or change the angle to clean difficult locations.

Reduce the number of cleaning cycles

Simple adjustments to pressure and flow may enable a reduction in the number of cycles needed for thorough cleaning.

Recirculate and save

Consider recycling your cleaning solution if you aren’t using hazardous materials and your water is free of debris.

Activate cleaning with the flip of a switch

Hard piping your tank cleaner in place can save time and reduce labor costs. Consider permanently installing the device as long as the material or temperature of the material won’t damage the cleaning equipment.

Minimize striping

Motor- and fluid-driven tank cleaners provide 360° coverage. However, the solid stream sprays do not overlap as they rotate so there is a small distance between the sprays. The greater the distance the nozzles are from the tank walls, the greater the distance between the sprays. This distance between the sprays causes a “striping” effect. The best way to minimize striping is to use a three- or four-nozzle hub rather than the standard two-nozzle hub. Striping will be minimized.

Striping effect with two-nozzle hub

Striping effect with four-nozzle hub

Free tank cleaning evaluation

Once you’ve reviewed this bulletin, you should consider taking advantage of our complimentary, on-site tank cleaning evaluation. One of our tank cleaning specialists will visit your plant and observe your operations.

• If tank cleaning nozzles are in use, we will inspect the nozzles and evaluate the type, placement and position

• We will document flow rates, operating pressures, cleaning fluids and residues being removed

• After the evaluation we will provide a written report summarizing your current operations and recommendations to improve cleaning efficiency

Contact your local sales engineer for more information. Call 1.800.95.SPRAY or 1.630.665.5000



abOuT SprayinG SySTemS CO.

Spraying Systems Co. is the world leader in spray technology. It offers the broadest product line in the industry including tank cleaning equipment, spray nozzles, spray controllers, spray injectors and lances and research and testing services. Founded in 1937 in Chicago, Illinois, the company now has 10 manufacturing locations and 90 sales offices around the world.

Spraying Systems Co. recently formed a strategic alliance with Cloud-Sellers, a leader in tank cleaning equipment. The alliance enables Spraying Systems Co. to offer a wider range of products and Cloud-Sellers to benefit from increased distribution.

The Cloud-Sellers products are now branded as part of Spraying Systems Co.’s TankJet® line.

Catalog 15 - Introduction0211


quick reference Guide

NozzleMax Tank Diameter

ft (m)

Operating Principle

Operating Pressure psi (bar)

Flow Rate Range

gpm (l/min)

Spray Coverage

Min Tank Opening Size

in (mm)

Max Temperature

°F (°C)

TankJet D41800E 12

(3.7)Fluid Driven

Constant Speed30 - 230 (2 - 16)

2.7 - 33 (12 - 128) 360° 1.25

(32)300

(150)

TankJet 6353 &

6353-MFP

10 (3.0)

Fixed Stationary

20 - 50 (1.5 - 3.5)

8.9 - 80 (35 - 301) 360° 6

(152)212

(100)

TankJet AA090

8 (2.4)

Motor Driven 100 - 500 (7 - 35)

1.5 - 7.3 (5.7 - 28) 360° 2.3

(59)200 (93)

TankJet 18250A

Fluid Driven Reactionary

Force

10 - 60 (1 - 4)

10.5 - 55 (48 - 205) 360° 2.22

(60)350

(177)

TankJet 30473


Force

10 - 50 (0.7 - 4)

2.1 - 4.5 (7.8 - 18)

180° up/down, ~360° 1

(25)200 (93)

TankJet D41892

6.5 (2.0)


Force

20 - 70 (1.4 - 5)

4.0 - 7.5 (15.9 - 29) 360° 1.5

(37)160 (70)

TankJet D41990


Force

15 - 60 (1 - 4)

2.5 - 7.3 (9.5 - 28)

180° up/down, 360°

Thread: 1 (25); CIP version:

2 (50)

300 (149)

TankJet 21400A

5 (1.5)


Force

10 - 60 (1 - 4)

5.0 - 22 (23 - 82) 360° 2.25

(60)350

(177)

TankJet VSM

Fixed Stationary

10 - 150 (0.7 - 10)

2.7 - 72 (10.4 - 269) 240° down 2

(51)200 (93)

TankJet 23240

3 (0.9)


Force

20 - 200 (1.5 - 12)

3.5 - 22 (14 - 79)

360°, Side Spray

1.03 (26)

350 (177)

TankJet 3150

Fixed Stationary

10 - 150 (1 - 10)

5.2 - 26 (23 - 91) 210°, 360° 2

(51)212

(100)

TankJet 36640


Force

10 - 60 (1 - 4)

0.8 - 2.2 (3.4 - 7.9) Side Spray 1.03

(26)200 (93)

TankJet 15498

2 (0.6)

Fixed Stationary

60 - 150 (5 - 10)

5.5 - 11.7 (23 - 43) 210°, 360° 2

(51)212

(100)

Catalog 15 - Quick Reference Guide0211


quick reference Guide

NozzleMax Tank Diameter

ft (m)

Operating Principle

Operating Pressure psi (bar)

Flow Rate Range

gpm (l/min)

Spray Coverage

Min Tank Opening Size

in (mm)

Max Temperature

°F (°C)

TankJet® 360

100 (30)

Fluid Driven Turbine

40 - 350 (2.8 - 24)

30 - 300 (113.5 - 1135.6) 360° 6.25

(158.7)250

(121)

TankJet 180

80 (24.4)


40 - 350 (2.8 - 24)

30 - 300 (113.5 - 1135.6) 180° 12.25

(311) 250

(121)

TankJet AA290

Motor Driven 50 - 250 (3.5 - 17)

22 - 200 (85 - 757) 360°

7.25 (184) for 2 nozzle;

8.25 (210) for 4 nozzle

200 (93)

TankJet AA190-HP5

Motor Driven 500 - 5000 (35 - 350)

4.9 - 65 (18.4 - 246) 360°

3.75 (95) for 2- or

4-nozzle hub

350 (177)

TankJet 80

50 (15.2)


60 - 150 (4.1 - 10.3)

50 - 125 (189 - 473) 360°

6.5 (165) for 2 nozzle;

12.5 (318) for 3 nozzle

250 (121)

TankJet 65

40 (12.2)


50 - 150 (3.4 - 10.3)

30 - 150 (114 - 568) 360° 7.5

(190)

250 (121); 500 (260)

high-temperature

version

TankJet AA190

34 (10.4) Motor Driven 100 - 1000

(7 - 70)3.1 - 44

(11.8 - 170)

180°, 360°

3.75 (95) for 360°;

4.5 (114.3) for 180°

200 (93)

TankJet 75

30 (9.1) Fluid Driven 50 - 300

(3.5 - 20.7)8 - 33

(30 - 125) 360°

3 (76.2) for 2 nozzle; 3.75 (95.2)

for 4 nozzle

350 (121)

TankJet 27500 & 27500R

25 (7.6)


Force

10 - 50 (0.7 - 3.5)

4 - 391 (15.3 - 1490)

180° up/down, 270° up/down,

360°

2 - 7 (51 - 178)

200 (93)

TankJet 12900

22 (6.7)

Fixed Stationary

20 - 50 (1.5 - 3.5)

72 - 385 (280 - 1470)

360° and custom spray

angles

10 (254)

212 (100)

TankJet D26984 &

D40159

20 (6.0)

Fluid Driven Constant Speed

30 - 230 (2 - 16)

3.2 - 31 (12 - 128)

65° down,120° down,

180° up/down,260° up/down,

360°

2.25 (56)

160 (70)

TankJet 28500 & 28500R

18 (5.5)


Force

10 - 50 (0.7 - 3.5)

9 - 78 (34 - 295)

180° up/down, 270° up/down,

360°

2.5 - 4 (64 - 102)

200 (93)

TankJet 63225

13 (4)

Fixed Stationary

15 - 40 (1 - 2.8)

22 - 51 (83 - 192) 360° 1.5 - 4

(38 - 102)400

(204)

SolutionS for tankS Up to 100' (30 m) in Dia.

100'(30 m

)tank D

ia.

Spray nozzles

Spray Control

Spray analysis

Spray fabrication


TankJet® 360 Fluid driven tank cleaner

TankJet 360 tank cleaner for tanks up to 100’ (30 m) in dia.

TAnkJET® 360 FLuID DRIVEn TAnk CLEAnER

Ideal for Cleaning:• Blenders

• Brewery tanks

• Food processing vats and tanks

• Petrochemical/chemical processing reactors

• Pulp storage chests

• Processing tanks

• Tanker trucks

• Wine vats

Spray Coverage

360°

100' (30 m)tank dia.

High-impact, High-efficiency cleaning for Hard-to-remove residues

Features and Benefits

• Outperforms other fluid driven tank cleaners with more consistent impact over the entire pressure range

• High-impact cleaning results in shorter cycle times so tanks are returned to service more quickly

• nozzles rotate 360° in horizontal and vertical planes creating a crisscrossing pattern to thoroughly clean tanks and remove the stickiest of residues

• Food-grade, oil-lubricated or flow-through gearbox designs

• Choice of dual- or triple-nozzle hubs

• no motors – TankJet 360 tank cleaners are fluid-driven

• Sleek and compact – fits in small tank openings

• Choice of standard clutch version or optional pin version. With clutch version, nozzle hub easily rotates by hand for insertion and removal from tank. Use pin version for permanent or CIP installations. Optional external, self-rinse nozzles available for both pin and clutch versions

• Lightweight for easy portability

• Customizable to your operation. TankJet 360 can be used for high-concentration chemical recirculation cleaning or low pressure, high-volume cleaning. All units are built-to-order

• Built-in strainer minimizes clogging and extends wear life

• user-serviceable for easy maintenance

• For flow rates below 30 gpm (113.5 l/min) use TankJet 363 tank cleaners with low flow patented technology to reduce wastewater costs. Contact your local sales engineer for more information

• Great value – TankJet 360 is competitively priced, provides better performance and comes with the applications expertise and support of the world’s leader in spray technology

Try Before You Buy: Ask About Our Free 15-Day Trial Program


Specifications

Max. tank dia.: 100’ (30 m)

Flow rate range: 30 to 300 gpm (113.5 to 1135.6 I/min)

Pressure range: 40 to 350 psi (2.8 to 24 bar)

Wash cycle time: 10 to 30 min

Max. operating temp.: 250°F (121°C)

Min. tank opening size:

Dual nozzle: 6.25” (15.9 cm) Triple nozzle: 10.25” (26 cm)

Inlet conn.:

2” nPT (F) with 2-1/2” quick-disconnect (M)

2” nPT (F) with 2-1/2” nST (nH) hose thread (M)

2” BSPT (F) with 2-1/2” quick-disconnect (M)

Materials of construction:

Castings – 316 stainless steel

Gears – 17-4ph stainless steel

O-rings – self-lubricating EPDM or Viton®

Seals – high-performance spring-energized PTFE

Gear shaft bearing system – PTFE or oilite bearing

All other metallurgy – 316 stainless steel

Weight: 25 lbs (11.3 kg)

Viton® is a registered trademark of DuPont Performance Elastomers.

TAnkJET® 360 FLuID DRIVEn TAnk CLEAnER100' (30 m)tank dia.

Catalog 15 - TankJet 360

Dual Nozzle Configuration

Triple Nozzle Configuration

13.3" (338.1 mm)

13.3" (338.1 mm)

6.25" (158.7 mm) MIN. OPENING

10.25" (260.3 mm) MIN. TANK OPENING

0211

SolutionS for tankS Up to 80' (24.4 m) in Dia. 80'

(24.4 m)

tank Dia.

Spray nozzles

Spray Control

Spray analysis

Spray fabrication




Ideal for Cleaning:• Adhesive tanks


• Paint tanks

• Petrochemical/chemical processing reactors

• Processing tanks

• Sludge/wastewater tanks

Spray Coverage

180° Down

directional unit Provides concentrated, High-impact cleaning of Hard-to-remove residues


• Outperforms other fluid driven tank cleaners – more consistent impact over the entire pressure range

• High-impact cleaning results in shorter cycle times so tanks are returned to service more quickly

• Provides a concentrated cleaning stream that removes difficult residues and heavy sludges from the bottom and shadow areas of the tanks

• Ideal for open top tanks

• nozzles rotate on multiple axes to create a crisscrossing pattern to thoroughly clean tanks and remove the stickiest of residues

• Food-grade, oil-lubricated or flow-through gearbox designs

• no motors – TankJet 180 tank cleaners are fluid-driven

• Lightweight for easy portability

• Customizable to your operation. TankJet 180 can be used for high-concentration chemical recirculation cleaning or low pressure, high-volume cleaning. All units are built-to-order

• TankJet 180 is designed with built-in strainer to minimize clogging and for long wear life

• Great value – TankJet 180 is competitively priced, provides better performance and comes with the applications expertise and support of the world’s leader in spray technology

80' (24.4 m)tank dia.

TankJet 180 tank cleaner for tanks up to 80’ (24.4 m) in dia.

Try Before You Buy: Ask About Our Free 15-Day Trial Program


Specifications

Max. tank dia.: 80’ (24.4 m)

Flow rate range: 30 to 300 gpm (113.5 to 1135.6 I/min)


Wash cycle time: 10 to 30 min

Max. operating temp.: 250°F (121°C)

Min. tank opening size: 12.25” (31.1 cm)

Inlet connection:

2” nPT (F) with 2-1/2” quick-disconnect (M)

2” nPT (F) with 2-1/2” nST hose thread (M)

2” BSPT (F) with 2-1/2” quick-disconnect (M)


Castings – 316 stainless steel

Gears – 17-4ph stainless steel

O-rings – self-lubricating EPDM or Viton®

Seals – high-performance spring-energized PTFE

Gear shaft bearing system – PTFE or oilite bearing

All other metallurgy – 316 stainless steel

Height: 12.2” (31 cm)

Width including nozzle housing: 12.125” (30.8 cm)


Viton® is a registered trademark of DuPont Performance Elastomers.



80' (24.4 m)tank dia.

TankJet 180 tank cleaner

0211


TankJet® aa290Motor driven tank cleaner

consistent High-impact cleaning day-in and day-out


• Dependable, durable motor-driven units provide powerful cleaning and remove the most stubborn residues

• Customize to your cleaning operation. Choose: – CE-rated air (AG) or explosion-proof (EP) electric motor – Two- or four-nozzle hub – 3’, 4’ or 6’ (.9, 1.2 or 1.8 m) shaft length Plus, change flow rates through nozzle selection

or adjustments to inlet pressure

• Motor positioned outside of tank for longer life and fewer failures due to exposure to harmful cleaning solutions

• Long-life construction features corrosion-resistant 316 stainless steel and PTFE fluoropolymer resin seals

• Optimum impact provided by 55430 series solid stream nozzles: with stabilizer vanes that can be removed for maintenance purposes

Lubricator assembly is included with the air (AG) model only. Regular lubrication of the air supply line will significantly increase the life of the air motor.

TAnkJET® AA290 MOTOR DRIVEn TAnk CLEAnER

Ideal for Cleaning:

• Fermentation and yeast tanks and vats

• Flour silos

• Mixing tanks

• Paint tanks

Spray Coverage

360°

Explosion-proof electric motor

Air motor

TankJet AA290EP and AA290AG tank cleaners for tanks up to 80’ (24.4 m) in dia.

80' (24.4 m)tank dia.

Specifications

Max. tank dia.: 80’ (24.4 m)

Flow rate range: 22 to 200 gpm (85 to 757 l/min)


Max. operating temperature:

200°F (93°C)


7.25” (184 mm) for two-nozzle hub 8.25” (210 mm) for four-nozzle hub

Spray coverage: 360°

Inlet conn.: 2” nPT or BSPT (F)

Flanges:8” (203 mm) flange for two-nozzle hub 10” (254 mm) for four-nozzle hub

Motor: Air, explosion-proof electric

Shaft lengths: 3’, 4’ or 6’ (.9, 1.2 or 1.8 m)


Cycle Time Data – Explosion-Proof Motor (EP)

Cycle Time Data – Air Motor (AG) Dimensions and Weights – Air Motor (AG)

Dimensions and Weights – Explosion-Proof Motor (EP)

Performance Data

Total Flow of Two Nozzles (Equal Capacity) gpm or l/min Liquid Inlet Pressure*Double flow rates when using four nozzles up to 200 gpm (752 l/min)

Nozzle No. 50 psi (3.5 bar)

100 psi (7 bar)

150 psi (10 bar)

200 psi (15 bar)

250 psi (17 bar)

55430-H3/4u-00100 22 (85) 32 (121) 39 (144) 45 (177) 50 (188)

55430-H3/4u-00200 45 (171) 63 (241) 77 (288) 89 (353) 100 (376)

55430-H3/4u-00250 56 (213) 79 (301) 97 (360) 112 (441) 125 (470)

55430-H3/4u-00350 78 (298) 111 (422) 136 (505) 157 (618) 175 (658)

55430-H3/4u-00400 89 (341) 126 (482) 155 (577) 179 (706) 200 (752)

*Note: Liquid inlet pressure measured near inlet connection of tank cleaner.

Approx. Speed (rpm) Supply Approx. Time for One

Complete Cycle (min.)

4120 VAC

60 Hz16

Model no. Extension Length

Overall Length

Weight with 8" Flange


AA290AG_F3 3'

(0.9 m) 60-7/8" (1.5 m)

56 lbs (25.5 kg)

63 lbs (28.7 kg)

AA290AG_F4 4'

(1.2 m) 72-7/8" (1.8 m)

60 lbs (27.3 kg)

67 lbs (30.5 kg)

AA290AG_F6 6'

(1.8 m) 96-7/8" (2.5 m)

69 lbs (31.4 kg)

76 lbs (34.6 kg)

Model no. Extension Length

Overall Length



AA290E_F-EP33'

(0.9 m) 61-3/4" (1.6 m)

66 lbs (30.1 kg)

73 lbs (33.2 kg)

AA290E_F-EP44'

(1.2 m) 73-3/4" (1.8 m)

70 lbs (31.9 kg)

77 lbs (35.0 kg)

AA290E_F-EP66'

(1.8 m) 97-3/4" (2.5 m)

79 lbs (36.0 kg)

86 lbs (39.1 kg)

Air Pressure psi (bar)

Air Consumption scfm (l/sec)

Approx. Speed (rpm)

Approx. Time for One Complete

Cycle (min.)

50 psi (3.4 bar)

250 psi (17.2 bar)

50 psi (3.4 bar)

250 psi (17.2 bar)

12 (0.83) 4.7 (2.2) 6 2 11 32

14 (0.97) 5.4 (2.5) 8 4 7 17

16 (1.10) 6.3 (3.0) 10 8 6 8

18 (1.24) 7.1 (3.4) – 9 – 7

Spray Head Tank Diameter Opening with Two Nozzles

7.25" (184 mm) Opening

1.6" (40 mm)

Spray Head Tank Diameter Opening with Four Nozzles

1.96" (50 mm)

8.25" (210 mm)Opening

TAnkJET® AA290 MOTOR DRIVEn TAnk CLEAnER80' (24.4 m)tank dia.


TAnkJET® AA290 MOTOR DRIVEn TAnk CLEAnER 80' (24.4 m)tank dia.

Ordering Information

tankJet aa290ag tank cleaner

tank cleaner nozzle no.

aa290ag 8F – 3 – 2 + 55430-H 3/4 u – 316SS – 00100I I I I I I I I I

TankCleaner

Type

8" Flange

ExtensionLength

Hub Type (No. of

Nozzles)

NozzleType

Prefix

NozzleInlet

Conn.

NozzleType

Material Code

CapacitySize

Add B after AA in the tank cleaner type and prior to nozzle type prefix for BSPT connections.

tankJet aa290e-eP tank cleaner


aa290e 10F – eP – 3 – 4 + 55430-H 3/4 u – 316SS – 00100I I I I I I I I I I

TankCleaner

Type

10" Flange

Explosion-proof Motor

ExtensionLength

Hub Type

(No. of Nozzles)

NozzleType

Prefix

NozzleInlet

Conn.

NozzleType

Material Code

CapacitySize


8” flange

Bolt Circle Dia.

O.D.

Bolt Hole Dia.

Flange Size Flange O.D.

Bolt Circle Diameter no. of Flange Holes Bolt Hole Diameter Thickness

8” flange 13.5” 11.75” 8 0.875” 3/8”

10” flange 16” 14.25” 12 1.00” 3/8”

Bolt Circle Dia.

Bolt Hole Dia.

10” flange

O.D.

Flange Specifications

Catalog 15 - AA2900211


TankJet® 80 Fluid driven Tank Cleaner

TankJeT® 80 Fluid driven Tank Cleaner

Ideal for Cleaning:• Brewery tanks

• Chemical vessels

• Fermenters

• Food and dairy tanks

• Tanker trucks

Spray Coverage

360°

Powerful, reliable Cleaning of Tanks up to 50’ (15.2 m) in dia.


• Ideal for cleaning large tanks, tanker trucks and fermenters with minimal maintenance cost

• Solid stream nozzles rotate in multiple axes to provide complete 360° coverage of entire tank every 45 revolutions

• Fluid driven, turbine driven with external gears indexes the nozzles with each rotation. Slow, rotating speed provides excellent dwell time on tank surface and improves cleaning

• Simple design is easy to maintain

• Mount permanently or move from tank to tank

• Available with two or three nozzle hub

• Lightweight – weighs only 15 lbs. (6.8 kg)

• Self -cleaning, flow-through design

• Optional external CIP nozzle helps clean unit and drop pipe

50' (15.2 m)Tank dia.

Specifications

Flow rate range:

Two-nozzle version: 50 to 95 gpm (189 to 360 l/min)Three-nozzle version: 60 to 125 gpm (227 to 473 l/min)

Pressure range: 60 to 150 psi (4.1 to 10.3 bar)Max. operating temperature:

250°F (121°C)

Rotation speed: 3 to 20 RPM


Two-nozzle version: 6.5” (165.1 mm) Three-nozzle version: 12.5” (317.5 mm)


Inlet conn.: 1-1/2” NPT or BSPT (F)

Weight: 15 lbs. (6.8 kg)

Materials: 316SS, PTFE, UHMW-PE

Nozzles:

Two: .375” (9.5 mm) or .438” (11.1mm) orifice Three: .313” (7.8 mm) or .375” (9.5 mm) orifice

TankJet 80 tank cleaners for tanks up to 50’ (15.2 m) in dia.

Units are available with two or three nozzles. Both versions can be equipped with optional clean-in place nozzle as shown on the right.




50' (15.2 m)Tank dia.

0211

Nozzle No.Capacity gpm (l/min)

60 psi (4.1 bar)

70 psi (4.8 bar)

80 psi (5.5 bar)

90 psi (6.2 bar)

100 psi (6.9 bar)

110 psi (7.6 bar)

120 psi (8.3 bar)

130 psi (9.0 bar)

140 psi (9.7 bar)

150 psi (10.3 bar)

TJ80-2-375 50 (189) 57 (216) 62 (235) 65 (246) 68 (257) 73 (276) 76 (288) 79 (299) 83 (314) 86 (326)

TJ80-2-375CIP

TJ80-2-438

63 (238) 67 (254) 72 (273) 75 (284) 79 (299) 83 (314) 85 (322) 88 (333) 92 (348) 95 (360)TJ80-2-438CIP

TJ80-2-438SR

TJ80-3-31360 (227) 63 (238) 65 (246) 68 (257) 73 (276) 76 (288) 78 (295) 82 (310) 85 (322) 88 (333)

TJ80-3-313CIP

TJ80-3-375

94 (356) 97 (367) 100 (379) 103 (390) 107 (405) 111 (420) 114 (431) 118 (447) 121 (458) 125 (473)TJ80-3-375SR

TJ80-3-375SRCIP

Performance Data

TankJet 80-2 TankJet 80-3

Dimensions


TankJet 80 Tank Cleaning nozzle

TJ80 __* – 2 – 375 Sr CiPi i i i i i

Model No.

Inlet Type

Model Type

Nozzle Orifice

Size

Slow Rotation

Clean In Place

* Add B for BSPT connections. If NPT connection, leave blank.

3.7” (94 mm)

12.75” (323.9 mm)

6.5” (165.1 mm)

12.75” (323.9 mm)

11.75” (298.5 mm)

12.5” (317.5 mm)

Typically used in the brewery industry, clean-in place (CIP) nozzles clean unit and down pipe.


40'(12 m

)tank D

ia.

Spray nozzles

Spray Control

Spray analysis

Spray fabrication


TankJet® 65 FLUID DRIVEN TANK CLEANER

TankJeT® 65 FLUID DRIVen Tank CLeaneR

Thorough, Efficient, Dependable Cleaning


• Solid stream nozzles rotate in multiple axes to provide complete 360° coverage of entire tank every 45 revolutions

• Four-nozzle hub provides tight cleaning pattern and fast cycle times

• High-temperature version made of all stainless steel can withstand temperatures up to 500°F (260°F)

• Fluid driven, turbine driven with external gears indexes the nozzles with each rotation. Slow, rotating speed provides excellent dwell time on tank surface

• Simple self-cleaning, flow-through design

• Easy to maintain – no internal reduction gears

• Can be permanently mounted or moved from tank to tank

• Lightweight – weighs only 11.75 lbs. (5.3 kg)

Ideal for cleaning:

• Brew kettles

• Chemical processing tanks

• Dairy vessels

• Food processing vats

• Spray dryers

• Tanker trucks

Spray Coverage

360°

40' (12.2 m)Tank Dia.

Specifications

Max. tank dia.: 40’ (12.2 m)

Flow rate range:

Standard version: 30 to 100 gpm (114 to 379 l/min) High-temperature version: 65 to 150 gpm (246 to 568 l/min)

Pressure range: 50 to 150 psi (3.4 to 10.3 bar)

RPM range: 5 to 40 RPM


Standard version: 250°F (121°C) High-temperature version: 500°F (260°C)


7.5” (191 mm)


Inlet conn.: 1-1/2” NPT or BSPT (F)

Materials:

Standard version: Stainless steel, PTFE, UHMW-PE, nylon High-temperature version: all stainless steel

Nozzles: Four: .250 (6.4 mm) or .313 (7.9 mm) or .375 (9.5 mm)

TankJet 65 tank cleaners for tanks up to 40’ (12.2m) in dia.


TankJeT® 65 FLUID DRIVen Tank CLeaneR

Model No.Capacity gpm (l/min)

50 psi(3.4 bar)

70 psi(4.8 bar)

90 psi(6.2 bar)

100 psi(6.9 bar)

110 psi(7.6 bar)

130 psi(9.0 bar)

150 psi(10.3 bar)

TJ65-250 30 (114) 39 (148) 45 (170) 49 (185) 53 (201) 58 (220) 63 (238)

TJ65-313 51 (193) 60 (227) 70 (265) 74 (280) 79 (299) 85 (322) 92 (348)

TJ65-375 58 (220) 69 (261) 78 (295) 83 (314) 88 (333) 94 (356) 100 (379)

TJ65-250-HT 65 (246) 78 (295) 90 (341) 96 (363) 100 (379) 109 (413) 116 (439)

TJ65-313-HT 67 (254) 83 (314) 97 (367) 103 (390) 107 (405) 117 (443) 126 (477)

TJ65-375-HT 86 (326) 105 (397) 119 (450) 125 (473) 130 (492) 143 (541) 150 (568)

Performance Data


TankJet 65 Tank Cleaner

TJ65 __* – 375 – HTI I I I

Model No.

Inlet Type

Nozzle Orifice Size

High Temperature


Dimensions

40' (12.2 m)Tank Dia.


7.5” (190.5 mm)

0211

10.25” (260.4 mm)

6.63” (168.4 mm)


TankJet® aa190 Motor driven tank cleaner


Specifications

Max. tank dia.: 25’ (7.6 m) for standard versions; 34' (10.4 m) for high-presure versions

Flow rate range:

3.1 to 44 gpm (11.8 to 170 l/min) for standard versions; 7 to 20 gpm (26 to 78 l/min) for high-pressure versions

Pressure range:100 to 500 psi (7 to 35 bar) for standard versions; high-pressure versions up to 1000 psi (70 bar)

Max. operating temperature: 200°F (93°C)


3.75” (95 mm) for units providing 360° coverage; 4.5” (114.3 mm) for units providing 180° coverage

Spray coverage: 360° or 180°


Motor: Air, electric, explosion-proof electric

Shaft lengths: 3’, 4’ or 6’ (.9, 1.2 or 1.8 m)

Motorized units Provide thorough, Quick cleaning and trouble-Free operation


• Versatile high-impact tank cleaner provides efficient, consistent, reliable cleaning with virtually no maintenance

• Many options allow easy customization for your cleaning operation. Choose:

– Variable speed CE-approved air (AG), electric (E) or explosion-proof (EP) electric motor

– Standard versions that operate at pressures up to 500 psi (35 bar)

– High-pressure versions that operate at pressures up to 1000 psi (70 bar) for higher impact

– 360° or 180° coverage

– 3’, 4’ or 6’ (.9, 1.2 or 1.8 m) shaft length

• Flange type – standard, 150# raised face or sanitary tri-clamp flange

• Motor is positioned outside the tank away from harmful caustics

• Lightweight – can be installed permanently or easily moved from tank to tank

• Long wear life materials of construction – corrosion-resistant 316 stainless steel and PTFE fluoropolymer resin seals

Ideal for Cleaning:

• Chemical reactors

• Food processing tanks and vats

• Paint tanks

• Pharmaceutical processing vessels

• Process tanks

• Tanker trucks

Spray Coverage

360°

180°

34' (10.4 m)tank dia.

TankJet AA190EP tank cleaners feature an electric, explosion-proof motor and provide 360° coverageTankJet AA190DAG

tank cleaners provide 180° coverage and are available in standard and high-pressure versions

TankJet AA190AG tank cleaners provide 360° coverage and are available in standard and high-pressure versions

TankJet AA190 tank cleaners for tanks up to 34’ (10.4 m) in dia.




Total Flow of Two Nozzles (Equal Capacity) gpm or l/min Liquid Inlet Pressure*

Nozzle No. 100 psi (7 bar)

200 psi (15 bar)

300 psi (20 bar)

400 psi (30 bar)

500 psi (35 bar)

700 psi (50 bar)**

1000 psi (70 bar)**

1/4MEG-0010 3.1 (11.8) 4.4 (17.3) 5.4 (20) 6.3 (24) 7.0 (26) 8.2 (32) 9.8 (38)

1/4MEG-0015 4.7 (17.9) 6.6 (26) 8.1 (30) 9.4 (37) 10.5 (40) 12.4 (48) 14.9 (57)

1/4MEG-0020 6.2 (24) 8.8 (35) 10.8 (40) 12.4 (49) 13.9 (53) 16.4 (63) 19.6 (75)

1/4MEG-0025 7.7 (29) 10.9 (43) 13.3 (50) 15.4 (61) 17.2 (66) 20 (78) –

1/4MEG-0030 9.1 (35) 12.9 (51) 15.8 (59) 18.2 (72) 20 (78) – –

1/4MEG-0035 10.5 (40) 14.8 (59) 18.1 (68) 21 (83) 23 (90) – –

1/4MEG-0040 11.8 (45) 16.7 (66) 20 (76) 24 (93) 26 (101) – –

1/4MEG-0050 14.2 (54) 20 (79) 25 (92) 28 (112) 32 (121) – –

1/4MEG-0060 16.4 (63) 23 (92) 28 (102) 33 (129) 37 (140) – –

1/4MEG-0070 18.3 (70) 26 (102) 32 (118) 37 (144) 41 (156) – –

1/4MEG-0080 19.9 (76) 28 (111) 34 (128) 40 (157) 44 (170) – –

*Note: Flow rates tabulated above include pressure drop through unit. ** High-pressure versions only. For additional performance data on high-pressure units, contact your local representative.

Performance Data – AA190 Tank Cleaners

MotorType

ACFrequency

Speed(rpm)

Current(amps)

Power(watts)


Cycle (min.)

Electric50 Hz. 3.1 .39 41 11

60 Hz. 3.8 .33 34 9

Explosion-Proof

50 Hz. 0.8 0.3 33 44

60 Hz. 1.0 0.3 28 35

Cycle Time Data – Electric Motor (E and EP)

Air Pressure

Air Consumption

Approx. Speed (rpm)

Approx. Time for One Complete Cycle (min.)

psi (bar)

scfm (l/min)

50 psi (3.45 bar)

500 psi (34.48 bar)

50 psi (3.45 bar)

500 psi (34.48 bar)

6 (0.41) 3.74 (105.8) 4 1 8.8 35

8 (0.55) 4.72 (133.6) 7 4 5.0 8.8

10 (0.69) 5.84 (65.3) 10 8 3.5 4.4

*For standard and high-pressure versions.

Cycle Time Data – Air Motor* (AG, DAG)

AA190 Spray Head Tank Diameter Opening with Two Nozzles

1.3" (33 mm)


3.6"

(85

mm

)

3.0" (76 mm)

AA190D Spray Head Tank Diameter Opening with Two Nozzles

3.4" (86.3 mm)

4.4" (112.5 mm)

4.75" (114.3 mm)

Opening

4.5" DIA (114.3 mm)

2.0" DIA (5.8 mm)

2.6" (66 mm)

AA090

34' (10.4 m)tank dia.



Model no. Extension Length Overall Length Weight

AA190AG, AA190AGH*

3' (0.9 m) 54-1/4" (1.4 m) 14 lbs. (6.4 kg)

4' (1.2 m) 66-1/4" (1.7 m) 15-1/2 lbs. (7 kg)

6' (1.8 m) 90-1/4" (2.3 m) 18-1/2 lbs. (8.4 kg)

AA190DAG, AA190DAGH*

3' (0.9 m) 55" (1.4 m) 14 lbs. (6.4 kg)

4' (1.2 m) 67” (1.7m) 15-1/2 lbs. (7 kg)

6' (1.8 m) 91” (2.3 m) 18-1/2 lbs. (8.4 kg)

AA190E

3' (0.9 m) 48-7/8" (1.2 m) 14 lbs. (6.4 kg)

4' (1.2 m) 60-7/8" (1.5 m) 15-1/2 lbs. (7 kg)

6' (1.8 m) 84-7/8" (2.1 m) 18-1/2 lbs. (8.4 kg)

AA190E-EP

3' (0.9 m) 51-7/8" (1.3 m) 14 lbs. (6.4 kg)

4' (1.2 m) 63-7/8" (1.6 m) 15-1/2 lbs. (7 kg)

6' (1.8 m) 87-7/8" (2.2 m) 18-1/2 lbs. (8.4 kg)

*H indicates high-pressure version.


AA190AG3F

3' (0.9 m) 54-1/4" (1.4 m) 24-1/2 lbs. (11.1 kg)

4' (1.2 m) 66-1/4" (1.7 m) 26 lbs. (11.8 kg)

6' (1.8 m) 90-1/4" (2.3 m) 29 lbs. (13.2 kg)

AA190E3F

3' (0.9 m) 48-7/8" (1.2 m) 24-1/2 lbs. (11.1 kg)

4' (1.2 m) 60-7/8" (1.5 m) 26 lbs. (11.8 kg)

6' (1.8 m) 84-7/8" (2.1 m) 29 lbs. (13.2 kg)

AA190AG4F

3' (0.9 m) 51-7/8" (1.3 m) 29-1/2 lbs. (13.4 kg)

4' (1.2 m) 63-7/8" (1.6 m) 31 lbs. (14.1 kg)

6' (1.8 m) 87-7/8" (2.2 m) 34 lbs. (15.4 kg)

AA190AE4F

3' (0.9 m) 54-1/4" (1.4 m) 29-1/2 lbs. (13.4 kg)

4' (1.2 m) 66-1/4" (1.7 m) 31 lbs. (14.1 kg)

6' (1.8 m) 90-1/4" (2.3 m) 34 lbs. (15.4 kg)

Dimensions and Weights


See Accessories Section for Information on Adjustable Flanges, Mounting Kits and Tank Cleaner Adapters.

Standard Three-Prong Mounting Flange

aa190 With Standard three-Prong Flange


aa190dagH – 3 + 1/4 Meg – 0010I I I I I

Tank Cleaner Type

Extension Length

Inlet Conn.

Nozzle Type

Capacity Size

150# Raised Face FlangeAvailable in 3" and 4".

aa190 With 150# raised Face Flange


aa190ag 3F – 3 + 1/4 Meg – 0010I I I I I I

Tank Cleaner

Type

150# Raised Face

Flange

ExtensionLength

InletConn.

NozzleType

CapacitySize



34' (10.4 m)tank dia.


TAnkJET® AA190 MOTOR DRIVEn TAnk CLEAnER34' (10.4 m)tank dia.

Sanitary Tri-Clamp FlangeAvailable in 3", 4" and 6".

aa190 With Sanitary tri-clamp Flange


aa190ag 3SF – 3 + 1/4 Meg – 0010I I I I I I

TankCleaner

Type

SanitaryTri-Clamp

Flange

ExtensionLength

InletConn.

NozzleType

CapacitySize

Note: The 3" sanitary flange has a modified hub assembly that can fit through a 2.75" opening with nozzles orientated in vertical position.




AA190AG3SF

3' (0.9 m) 54-1/4" (1.4 m) 14 lbs. (6.4 kg)

4' (1.2 m) 66-1/4" (1.7 m) 15-1/2 lbs. (7 kg)

6' (1.8 m) 90-1/4" (2.3 m) 18-1/2 lbs. (8.4 kg)

AA190E3SF

3' (0.9 m) 48-7/8" (1.2 m) 14 lbs. (6.4 kg)

4' (1.2 m) 60-7/8" (1.5 m) 15-1/2 lbs. (7 kg)

6' (1.8 m) 84-7/8" (2.1 m) 18-1/2 lbs. (8.4 kg)

AA190AG4SF

3' (0.9 m) 54-1/4" (1.4 m) 14-1/4 lbs. (6.5 kg)

4' (1.2 m) 66-1/4" (1.7 m) 15-1/2 lbs. (7 kg)

6' (1.8 m) 90-1/4" (2.3 m) 18-3/4 lbs. (8.5 kg)

AA190E4SF

3' (0.9 m) 48-7/8" (1.2 m) 14-1/4 lbs. (6.5 kg)

4' (1.2 m) 60-7/8" (1.5 m) 15-1/2 lbs. (7 kg)

6' (1.8 m) 84-7/8" (2.1 m) 18-3/4 lbs. (8.5 kg)

AA190AG6SF

3' (0.9 m) 54-1/4" (1.4 m) 17 lbs. (7.7 kg)

4' (1.2 m) 66-1/4" (1.7 m) 18-1/2 lbs. (8.4 kg)

6' (1.8 m) 90-1/4" (2.3 m) 21-1/2 lbs. (9.8 kg)

AA190E6SF

3' (0.9 m) 48-7/8" (1.2 m) 17 lbs. (7.7 kg)

4' (1.2 m) 60-7/8" (1.5 m) 18-1/2 lbs. (8.4 kg)

6' (1.8 m) 84-7/8" (2.1 m) 21-1/2 lbs. (9.8 kg)


See Accessories Section for Information on Adjustable Flanges, Mounting Kits and Tank Cleaner Adapters.





Specifications

Model No. 75-1858 75-1861

Flow rate range:

11 to 27 gpm (42 to 102 lpm)

8 to 33 gpm (30 to 125 lpm)

Pressure range:

75 to 300 psi (5.2 to 20.7 bar)

50 to 300 psi (3.5 to 20.7 bar)

RPM ranges: 10 to 18 RPM 7 to 17 RPM


250°F (121°C)

250°F (121°C)


3” (76.2 mm)

3.75” (95.2 mm)

Spray coverage: 360° 360°

Inlet conn.: 3/4" nPT, BSPT (F) 3/4" nPT, BSPT (F)

Nozzles: Two: 0.234" (5.9 mm) or 0.172" (4.4 mm) orifice

Four: 0.172" (4.4 mm) or 0.125" (3.2 mm) orifice


3 lbs (1.4 kg)

thorough, cost-effective cleaning of tanks, totes and iBcs up to 30’ (9.1 m) in dia.


• Ideal for medium impact cleaning and provides adequate impingement cleaning of small tanks without the expense of high impact tank cleaners

• Fluid driven with external gears to reduce speed of nozzles for better impact and cleaning efficiency

• 360° indexing pattern is completed every 45 revolutions

• Solid stream nozzles rotate in multiple axes to provide complete coverage of the entire tank

• Simple design is easy to maintain – can be rebuilt quickly and easily in about 5 minutes

• Mount permanently or move from tank to tank

• Self-cleaning, flow-through design

• Long-wearing materials – 316 stainless steel, PTFE and uHMWE-PE

Choose from two versions:

• TankJet 75-1858:

– Two nozzle hub design

– Two nozzle size options

– Fits in a 3” (76. 2 mm) opening

• TankJet 75-1861:

– Four nozzle design provides better coverage and faster cleaning

– Two nozzle size options

– Fits in a 3.75” (95.2 mm) opening

Ideal for Cleaning:

• Chemical containers

• Dairy tanks and totes

• Food and beverage tanks

• Pharmaceutical tanks

• Process tanks


Spray Coverage

360°

30' (9.1 m)tank dia.



Model no.Capacity gpm (l/min)

50 psi(3.4 bar)

75 psi(5.2 bar)

100 psi(6.9 bar)

150 psi (10.3 bar)

200 psi(13.8 bar)

250 psi(17.2 bar)

300 psi(21 bar)

TJ75-1858-234 – – – 20 (76) 23 (87) 25 (95) 27 (102)

TJ75-1858-234LP – 13 (49) 15 (57) 18 (68) – – –

TJ75-1858-172 – – – 15 (57) 18 (68) 20 (76) 22 (83)

TJ75-1858-172LP – 11 (42) 13 (49) 15 (57) – – –

TJ75-1861-172 – – – 23 (87) 29 (110) 31 (117) 33 (125)

TJ75-1861-172LP 11 (42) 15 (57) 18 (68) 22 (83) – – –

TJ75-1861-125 – – – 15 (57) 19 (72) 20 (76) 21 (80)

TJ75-1861-125LP 8 (30) 11 (42) 12 (45) 15 (57) – – –

Performance Data


tankJet 75 tank cleaning Machine

tJ75 __* – 1858 – 234 lPI I I I I

Model No.

Inlet Type

Model Type

Nozzle Orifice Size

Low Pressure


TankJet 75-1858 TankJet 75-1861

Dimensions



3.0” (76 mm)3.75” (95 mm)1.97”

(50 mm)1.97”

(50 mm)

6.13” (156 mm)

6.13” (156 mm)

0211


A C E

DB

TankJet® 27500 & 27500rFluid driven nozzleS

TAnkJET® 27500 & 27500R FLuID DRIVEn nOzzLES

Specifications

Max. tank dia.: 25’ (7.6 m)

Flow rate range: 4 to 391 gpm (15.3 to 1490 l/min)

Pressure range: 10 to 50 psi (.7 to 3.5 bar)



2” to 7” (51 to 178 mm) depending on capacity size

Spray coverage: 180° spraying up or down, 270° spraying up or down and 360°

Inlet conn. TankJet 27500: 1/2” to 3” nPT or BSPT (F)

Inlet conn. TankJet 27500R: 1/2” to 1” nPT or BSPT (F)

PtFe rotating nozzles resist Harsh chemicals and Provide excellent cleaning and rinsing


• Especially suited for CIP systems – no motor source is needed due to the reactionary force of the cleaning liquid to rotate the spray head

• Provides more impact than static spray balls

• Long-life material of construction – corrosion- and chemical-resistant PTFE fluoropolymer resin

• 27500R nozzles in 1/2” and 3/4” inlet connections are available in carbon-filled PTFE for improved thermal characteristics and higher mechanical strength over standard PTFE

• Spray angles range from 180° to 360°; can clean certain areas or entire tank interior

• 27500R has a rotating spray head that can be easily removed from the body for inspection and maintenance

• To optimize performance of the rotating spray head, use liquid free of debris

Ideal for Cleaning:

• Broke chests

• Chemical tanks

• PCB washers


• Process tanks

Spray Coverage

180° Up 270° Up 360°

180° Down 270° Down

TankJet 27500 tank cleaning nozzle

Some TankJet 27500R nozzles available in

carbon-filled PTFE

TankJet 27500R tank cleaning nozzles

for tanks up to 25’ (7.6 m) in dia.



TAnkJET® 27500 & 27500R FLuID DRIVEn nOzzLES

NozzleNo.

OrificeDia.

(mm)

Capacity gpm (l/min)Max. Tank

Dia. (m)10 psi (0.7 bar)

20 psi (1.5 bar)

30 psi (2 bar)

40 psi (3 bar)

50 psi (3.5 bar)

l 27500 (A thru E)-R-1/2-8-TEF 3/32" (2.4) 4.0 (15.3) 5.7 (22) 6.9 (26) 8.0 (32) 8.9 (34) 10' (3.0)

l 27500 (A thru E)-R-3/4-18-TEF 3/32" (2.4) 9.0 (34) 12.7 (50) 15.6 (58) 18 (71) 20 (77) 15' (4.3)

27500 (A thru E)-R-3/4-32-TEF 5/32" (4.0) 16 (61) 23 (89) 28 (103) 32 (126) 36 (136) 15' (4.3)

27500 (A thru E)-R-3/4-46-TEF 15/64" (6.0) 23 (88) 33 (130) 40 (148) 46 (182) 51 (196) 15' (4.3)

27500 (A thru E)-R-1-50-TEF 5/32" (4.0) 25 (95) 35 (140) 43 (161) 50 (197) 56 (215) 18' (5.5)

27500 (A thru E)-R-1-70-TEF 7/32" (5.6) 35 (133) 49 (195) 61 (225) 70 (275) 78 (300) 18' (5.5)

27500 (A thru E)-R-1-90-TEF 19/64" (7.5) 45 (172) 64 (250) 78 (290) 90 (355) 101 (385) 18' (5.5)

27500 (A thru E)-2-100-TEF 15/64" (6.0) 50 (191) 71 (280) 87 (320) 100 (395) 112 (425) 20' (6.0)

27500 (A thru E)-2-125-TEF 17/64" (6.7) 63 (240) 88 (350) 108 (400) 125 (495) 140 (530) 20' (6.0)

27500 (A thru E)-2-150-TEF 5/16" (7.9) 75 (285) 106 (420) 130 (480) 150 (590) 168 (640) 20' (6.0)

27500 (A thru E)-2-175-TEF 3/8" (9.5) 88 (335) 124 (490) 152 (560) 175 (690) 196 (745) 20' (6.0)

27500 (A thru E)-2-200-TEF 27/64" (10.7) 100 (380) 141 (560) 173 (645) 200 (790) 224 (850) 20' (6.0)

27500 (A thru E)-3-250-TEF 25/64" (9.9) 125 (475) 177 (700) 217 (805) 250 (985) 280 (1065) 25' (7.6)

27500 (A thru E)-3-300-TEF 27/64" (10.7) 150 (570) 212 (840) 260 (965) 300 (1180) 335 (1280) 25' (7.6)

27500 (A thru E)-3-350-TEF 31/64" (12.3) 175 (665) 247 (975) 303 (1130) 350 (1380) 391 (1490) 25' (7.6)

l Models available in carbon-filled PTFE.Suggested optimum operating range: 20 to 40 psi (1.5 to 3 bar).

Performance Data

Nozzle Type Inlet Dia. X Dia. Y z Flats

27500, 27500R 1/2" 1-15/16" (49.2 mm) 2-3/8" (60.3 mm) 1-1/8" (28.6 mm)

27500, 27500R 3/4" 2-1/4" (57.2 mm) 2-5/8" (66.6 mm) 1-5/16" (33.3 mm)

27500, 27500R 1" 2-3/4" (69.8 mm) 3" (76.2 mm) 1-5/8" (45.3 mm)

27500 2" 4-7/8" (123.8 mm) 4-3/8" (111 mm) 2-3/4" (69.8 mm)

27500 3" 6-7/8" (174.6 mm) 5-7/8" (149.2 mm) 3-7/8" (98.4 mm)

tankJet 27500 tank cleaning nozzle

27500 e – r – 3/4 – 18 – teF*I I I I I I

NozzleType

CoverageType

RemovableSprayHead

InletConn.

CapacitySize

MaterialCode

*Indicate CTEF for carbon-filled PTFE.


Dimensions

X Dia.

Y

Z


Catalog 15 - 275000211


TankJet® 14 and 16 Fluid driven Tank Cleaners

TankJeT® 14 and 16 Fluid driven Tank Cleaners

rotating units Provide Better Cleaning than static spray Balls


• Similar design and appearance to static spray balls except the units rotate to ensure effective impingement of cleaning solution on tank walls

• Fluid driven, turbine driven units rotate at slow speeds – 3 to 15 rpm – for increased dwell time on tank surface compared to free spinning units

• Solid stream pattern provides full coverage

• Suitable for CIP or portable installation

• Spray head is easily removed for inspection and maintenance

• Made of 316 stainless steel and PTFE materials

Choose from two versions:

TankJet 14:

• Fits easily into a 2” Schedule 40 pipe

• For tanks up to 12’ (3.6 m) diameter

TankJet 16:

• Fits easily into a 3” Schedule 40 pipe


Ideal for Cleaning:

• Brewery tanks • Pharmaceutical tanks

• Chemical mixers/blenders • Totes/IBCs

• Food processing tanks • Wine tanks

24' (7.2 m)Tank dia.

Specifications

Model No. TJ14 TJ16


30 to 76 gpm (114 to 288 l/min)


50 to 200 psi (3.4 to 13.8 bar)

Rotation speed: 3 to 15 RPM 3 to 15 RPM


250°F (121°C)

250°F (121°C)


2" (51 mm)

3" (76 mm)

Spray coverage: 360°; 270° down, 180° up and down

360°; 270° down, 180° up and down

Inlet conn.: 3/4" NPT, BSPT (F) 1-1/2" NPT, BSPT (F)

Weight: 2.25 lbs. (1 kg) 4.75 lbs. (2.1 kg)


H d C

G

Spray Coverage

180° Up 270° Down 360°

180° Down



Model No. Spray Coverage

Capacity gpm (l/min)

50 psi (3.4 bar)

70 psi (4.8 bar)

90 psi (6.2 bar)

100 psi (6.9 bar)

120 psi (8.3 bar)

140 psi (9.7 bar)

160 psi (11.0 bar)

180 psi (12.4 bar)

200 psi (13.8 bar)

TJ-14

d 13 (49) 16 (61) 18 (68) 19.5 (74) 21 (79) 23 (87) 25 (93) 27 (100) 28 (106)

G, H 16 (61) 18.5 (70) 21 (79) 23 (87) 24 (91) 26 (98) 28 (106) 30 (114) 32 (121)

C 17 (64) 19.5 (74) 22 (83) 25 (93) 26 (98) 28 (104) 30 (112) 32 (121) 34 (129)

TJ-16H 36 (136) 43 (163) 49 (185) 52 (197) 57 (216) 61 (231) 65 (246) 69 (261) 73 (276)

D, C, G 40 (151) 47 (178) 53 (201) 55 (208) 60 (227) 65 (246) 69 (261) 74 (280) 76 (288)

TankJeT® 14 and 16 Fluid driven Tank Cleaners

Dimensions


TankJet 14 and 16 Tank Cleaners

TJ14 __* – Bi i i

Model No.

Inlet Type

Spray Coverage

Performance Data

*Add B for BSPT connections. If NPT connection, leave blank.


Catalog 15 - TankJet 14 and 160311

TankJet 16

TankJet 14

6.56” (167 mm)

8.98” (228 mm)

1.97” (50 mm)

2.82” (77 mm)


TankJet® 12900 Fixed tank cleaning nozzle

TAnkJET® 12900 FIXED TAnk CLEAnInG nOzzLE

Specifications





Min. tank opening size: 10” (254 mm)

Materials: Brass or 316 stainless steel


Inlet conn.:3” nPT or BSPT (F) Accepts 1/2”, 3/4” or 1” FullJet full cone nozzles

Stationary cluster nozzles Provide robust and reliable cleaning of deep tanks


• Features 13 FullJet® nozzles to provide high-capacity cleaning

• Simple, reliable and does not contain any moving parts

• Can be specially designed for a wide range of coverages

• To rinse deeper tanks, use Model 12900-2 with a 1-1/2” bottom outlet connection for use with a pipe extension and a TankJet 6353 nozzle assembly

Ideal for Cleaning:

• Chemical tanks

• Process tanks

• Pulp chests

• Tanker trucks

Spray Coverage

360°


TankJet 12900-2 and 6353 for cleaning deeper tanks

TankJet 12900 tank cleaning nozzle for tanks up to 22’ (6.7 m) in dia.



NozzleNo.

FullJet®

Nozzle No.

Max. Free Passagein. (mm)


20 psi (1.5 bar)

30 psi (2 bar)

40 psi (3 bar)

50 psi (3.5 bar)

12900-1-1/2 1/2 HH40 0.141 (3.6) 72 (280) 86 (320) 99 (390) 109 (415)

12900-1-3/4 3/4 HH7 0.203 (5.2) 148 (580) 180 (660) 205 (800) 225 (860)

12900-1-1 1 HH12 0.250 (6.4) 252 (1000) 306 (1130) 350 (1370) 385 (1470)

Performance Data

tankJet 12900-1 tank cleaning nozzle

assembly nozzle

12900-1 – 3/4 – 316SS + 3/4HH – 316SS 7I I I I I I

NozzleNo.

InletConn.

MaterialCode

NozzleType

MaterialCode

CapacitySize

Add B prior to Nozzle No. and Nozzle Type for BSPT connections.



Nozzle No. A B Dia. Weight

12900-1-1/26-17/32"

(166 mm)7-1/2"

(191 mm)13.7 lbs. (6.2 kg)

12900-1-3/46-27/32"

(174 mm)8-1/4"

(210 mm)15.3 lbs. (6.9 kg)

12900-1-17-7/32"

(183 mm)9"

(229 mm)18.1 lbs. (8.2 kg)

A

B


Catalog 15 - 129000211


20'(6 m

)tank D

ia.

Spray nozzles

Spray Control

Spray analysis

Spray fabrication


TankJet® d40159 and d26984 Fluid driven tank cleaning nozzleS

TAnkJET® D40159 AnD D26984 FLuID DRIVEn TAnk CLEAnInG nOzzLES

Specifications


Flow rate range: 3.2 to 31 gpm (12.0 to 128 l/min)

Pressure range: 30 to 230 psi (2 to 16 bar)


Min. tank opening size: 2.25” (56 mm)

Spray coverage: D40159 – 65°, 120°, 180° and 260°; D26984 – 360°

Inlet conn.: 1/2” nPT or BSPT for stainless steel versions; 3/8” and 1/2” nPT or BSPT for PVDF versions

Kynar® is a registered trademark of Arkema, Inc.

constant-Speed nozzles Provide Superior cleaning and a choice of Spray coverages


• Features three flat sprays mounted in a rotating spray head driven by the flow of the cleaning liquid

• Rotates at nearly constant speed of 2 to 30 RPM over a wide range of fluid pressures for more thorough cleaning

• up to four times higher impact than a conventional rotating nozzle for improved cleaning efficiency

• Perfect for cleaning, sanitizing and foaming applications; slow controlled rotational speed provides more dwell time on tank surface

• PVDF nozzle body constructed of chemical and corrosion resistant Kynar® with a PTFE washer and a polyethylene sleeve

• 303 or 316 stainless steel body available with a PTFE sleeve and washer

• Sanitary tubing and wall mounting options available upon request

20' (6 m)tank dia.

Ideal for Cleaning:


• Dry powder tanks

• Food processing tanks

• Mixing tanks


TankJet D40149 and D26984 tank cleaning nozzles for tanks

up to 20’ (6 m) in dia.

TankJet D40159 and D26984 nozzles are available in stainless steel and PVDF; ATEX-certified

explosion-proof models are available in stainless steel


TAnkJET® D40159 AnD D26984 FLuID DRIVEn TAnk CLEAnInG nOzzLES


Performance Data

nozzle InletNozzle Type

CapacitySize


PVDF SS, 316SS 30 psi (2 bar)

40 psi (3 bar)

100 psi (5 bar)

150 psi (10 bar)

230 psi (16 bar)

3/8l 3.2 3.2 (12) 3.5 (14) 5.3 (17) 6.5 (24) 7.9 (30)

l 4.5 3.8 (14.5) 4.4 (17.0) 6.9 (22) 8.5 (32) 10.5 (40)

1/2

l l 3.2 3.2 (12) 3.5 (14) 5.3 (17) 6.5 (24) 7.9 (30)

l l 4.5 3.8 (14.5) 4.4 (17) 6.9 (22) 8.5 (32) 10.5 (40)

l l 9.9 8.4 (31.8) 9.7 (40) 15.5 (52) 19.1 (73) 24 (93)

l l 13.6 11.3 (42.9) 14.0 (55) 21 (71) 26 (101) 31 (128)

PVDF Models

A B Dia. C Dia. Weight

5-3/4"(146 mm)

1-15/16"(49 mm)

1-59/64"(49 mm)

.43 lbs.(0.19 kg)

303 and 316 Stainless Steel Models

A B Dia. C Dia. Weight

5-3/4"(146 mm)

2"(50 mm)

1-3/5"(41 mm)

1.62 lbs.(0.73 kg)


* Material: Specify PVDF for Chemical Resistant Kynar®. Specify SS for Stainless Steel Type 303 (DIN 1.4305). Specify 316SS for Stainless Steel Type 316 (DIN 1.4571).

**Add “A” to the D40159 part number for upward spray toward inlet.

Add B prior to the inlet connection for BSPT connections.

A

BC BC

A

Spray Angle 260° Down 260° Up** 180° Down 180° Up** 120° Down 65° Down

CapacitySize

3.2 l l l

4.5 l l l l

9.9 l l l l l l

13.6 l l l l

D40159 Spray Coverage

note: D40159-SS, -316SS not available in 3.2 capacity. D26984 available in 360° only.

tankJet d40159 tank cleaning nozzle

d40159 – 3/8 – PvdF* 3.2 – 260 a**

I I I I I INozzleType

InletConn.

MaterialCode

CapacitySize

SprayAngle

SprayDir..


d26984 – 3/8 – PvdF* – 3.2

I I I INozzleType

InletConn.

MaterialCode

CapacitySize

20' (6 m)tank dia.

Catalog 15 - D401590211


TankJet® 28500 & 28500r Fluid driven tank cleaning nozzleS

TAnkJET® 28500 & 28500R FLuID DRIVEn TAnk CLEAnInG nOzzLES

Specifications






2.5” to 4” (64 to 102 mm) depending on capacity size

Spray coverage: 180° up or down, 270° up or down and 360°

Inlet conn.: 3/4”, 1”, 1-1/2”, Dn20, Dn25 and Dn40 sanitary tubing

Sanitary, rotating nozzles resist Harsh chemicals and Provide excellent cleaning


• Threadless, tapered design promotes self-draining to prevent build-up on nozzle

• Well-suited for CIP systems – no motor source is needed due to reactionary force of cleaning liquid to rotate spray head

• Provides more impact than static spray balls

• Secured to inlet connection with 316 stainless steel locking pin

• Conforms to 3A sanitary standard 78-01 for spray cleaning devices to remain in place (does not apply to 180° spraying up coverage)

• Constructed of PTFE fluoropolymer resin – ideal for harsh cleaning chemicals

• 28500R has a rotating spray head that can be easily removed from the body for inspection and maintenance

• To optimize performance of the rotating spray head, use liquid free of debris

Ideal for Cleaning:

• Chemical tanks

• Dairy vats


• Pharmaceutical vessels

TankJet 28500 and 28500R tank cleaning nozzles for

tanks up to 18’ (5.5 m) in dia.Conforms to 3A standards for CIP


A C E

DB

Spray Coverage

180° Up 270° Up 360°

180° Down 270° Down


TAnkJET® 28500 & 28500R FLuID DRIVEn TAnk CLEAnInG nOzzLES

Dimensions



28500 e – r – 3/4 – 23 – teFI I I I I I

NozzleType

CoverageType

RemovableSprayHead

InletConn.

CapacitySize

MaterialCode

Performance Data

Nozzle No. Orifice Dia.(mm)


10 psi (0.7 bar)

20 psi (1.5 bar)

30 psi (2 bar)

40 psi (3 bar)

50 psi (3.5 bar)

28500 (A thru E)-3/4-18-TEF 0.089" (2.3) 9 (34) 12.7 (50) 15.6 (58) 18 (71) 20.1 (77)

28500 (A thru E)-Dn20-18-TEF 0.089" (2.3) 9 (34) 12.7 (50) 15.6 (58) 18 (71) 20.1 (77)

28500 (A thru E)-3/4-23-TEF 0.110" (2.8) 11.5 (44) 16.3 (64) 19.9 (74) 23 (91) 26 (99)

28500 (A thru E)-Dn20-23-TEF 0.110" (2.8) 11.5 (44) 16.3 (64) 19.9 (74) 23 (91) 26 (99)

28500 (A thru E)-3/4-32-TEF 0.154" (3.9) 16 (61) 22.6 (89) 27.7 (103) 32 (126) 35.8 (136)

28500 (A thru E)-Dn20-32-TEF 0.154" (3.9) 16 (61) 22.6 (89) 27.7 (103) 32 (126) 35.8 (136)

28500 (A thru E)-3/4-46-TEF 0.257" (6.5) 23 (88) 32.5 (128) 39.8 (148) 46 (181) 51.4 (196)

28500 (A thru E)-Dn20-46-TEF 0.257" (6.5) 23 (88) 32.5 (128) 39.8 (148) 46 (181) 51.4 (196)

28500 (A thru E)-1-33-TEF 0.152" (3.9) 16.5 (63) 23 (92) 29 (106) 33 (131) 37 (141)

28500 (A thru E)-Dn25-33-TEF 0.152" (3.9) 16.5 (63) 23 (92) 29 (106) 33 (131) 37 (141)

28500 (A thru E)-1-50-TEF 0.209" (5.3) 25 (95) 35.4 (140) 43.3 (161) 50 (197) 55.9 (213)

28500 (A thru E)-Dn25-50-TEF 0.209" (5.3) 25 (95) 35.4 (140) 43.3 (161) 50 (197) 55.9 (213)

28500 (A thru E)-1-70-TEF 0.266" (6.8) 35 (133) 49.5 (195) 60.6 (226) 70 (276) 78.3 (298)

28500 (A thru E)-Dn25-70-TEF 0.266" (6.8) 35 (133) 49.5 (195) 60.6 (226) 70 (276) 78.3 (298)

28500 (A thru E)-1-1/2-53-TEF 0.201" (5.1) 27 (101) 37 (148) 46 (171) 53 (209) 59 (226)

28500 (A thru E)-Dn40-53-TEF 0.201" (5.1) 27 (101) 37 (148) 46 (171) 53 (209) 59 (226)

28500 (A thru E)-1-1/2-70-TEF 0.266" (6.8) 35 (132) 49 (185) 61 (231) 70 (265) 78 (295)

28500 (A thru E)-Dn40-70-TEF 0.266" (6.8) 35 (132) 49 (185) 61 (231) 70 (265) 78 (295)

Y

Z

X Dia. nozzle Inlet ID Inlet Dia. X Dia. Y z

3/4" .76" 2-1/4" (57.2 mm) 2-5/8" (66.6 mm) 3/8" (9.5 mm)

Dn20 22.2 mm 2-1/4" (57.2 mm) 2-5/8" (66.6 mm) 3/8" (9.5 mm)

1" 1.02" 2-3/4" (69.8 mm) 2-7/8" (73 mm) 1/2" (12.7 mm)

Dn25 28.2 mm 2-3/4" (69.8 mm) 2-7/8" (73 mm) 1/2" (12.7 mm)

1-1/2" 1.52" 3-5/8" (92 mm) 3-5/8" (92 mm) 3/4" (19 mm)

Dn40 40.2 mm 3-5/8" (92 mm) 3-5/8" (92 mm) 3/4" (19 mm)

Dimensions do not include connection pin length.


Catalog 15 - 285000211




rotating nozzles effectively rinse Tanks


• Flat spray nozzles mounted in a rotating spray head driven by the flow of the cleaning liquid

• Simple and reliable – no ball bearings

• Operates effectively in any position – vertical or horizontal

• Suitable for CIP and sanitary applications

• Can be used for chemical distribution and passivation

• Made of 316 stainless steel with thermoplastic bearings

Choose from three versions:

TankJet 9-A

• Two flat sprays produce sides sprays – 2 x 175° coverage

• Low flow rates up to 5 gpm (18.9 l/min)


TankJet 9-B

• Six flat sprays provide 360° coverage of entire tank

• Flow rates up to 17 gpm (64 l/min)


TankJet 9-C

• Six flat sprays provide 360° coverage of entire tank

• High flow rates up to 38 gpm (144 l/min)


Ideal for Cleaning:

• Brewery tanks


• Drums and kegs



• Wine barrels and vats

Spray Coverage

2 x 175° 360°


Specifications

Model No. TJ9-A TJ9-B TJ9-C

Flow rate range:

1.3 to 5 gpm (4.9 to 18.9 l/min)

5 to 17 gpm (18.9 to 64 l/min)

12 to 38 gpm (45 to 144 l/min)

Pressure range:

10 to 120 psi (0.7 to 8.3 bar)

10 to 120 psi (0.7 to 8.3 bar)

10 to 120 psi (0.7 to 8.3 bar)

Max, operating temperature:

190°F (88°C)

190°F (88°C)

190°F (88°C)


1.0625" (27 mm)

1.375" (35 mm)

1.625" (42 mm)

Spray coverage: 2 x 175° 360° 360°

Inlet conn.: 3/8" NPT, BSPT (F)

1/2" NPT, BSPT (F)

3/4" NPT, BSPT (F)

Weight: .34 lbs. (.15 kg)

.58 lbs. (.26 kg)

.96 lbs. (.44 kg)




Dimensions



TJ9 __* – ai i i

Model No.

Inlet Type

Type

Performance Data




Model No.Capacity gpm (l/min)

10 psi (0.7 bar)

30 psi (2.1 bar)

50 psi (3.4 bar)

70 psi (4.8 bar)

90 psi (6.2 bar)

100 psi (6.9 bar)

110 psi (7.6 bar)

120 psi (8.3 bar)

TJ9-a 1.3 (4.9) 2.5 (9.5) 3 (11.4) 4 (15.1) 4.5 (17) 4.7 (17.8) 4.9 (18.5) 5 (18.9)

TJ9-B 5 (18.9) 8 (30) 11 (42) 13 (49) 14 (53) 15 (57) 16 (61) 17 (64)

TJ9-C 12 (45) 20 (76) 25 (95) 30 (114) 33 (123) 35 (133) 37 (140) 38 (144)

1.0625” (27 mm)

2.3125” (59 mm)

TankJet 9-A

TankJet 9-B

TankJet 9-C

3.5” (88 mm) 4”

(102 mm)

1.375” (35 mm)

1.625” (42 mm)


TankJet® 63225 & 63225-3aFixed SPray BallS

TAnkJET® 63225 & 63225-3A FIXED SPRAy BALLS

Specifications





Min. tank opening size: 3.4” to 4.6” (87 to 118 mm)

Spray coverage:TankJet 63225 360° TankJet 63225 180° up, 180° down, 360° Custom drilling upon request

Inlet tube size:3/4”, 1” TankJet 63225 3/4” 1”, 1-1/2” TankJet 63225-3A

Stationary Spray Balls ideal for Sanitary rinsing


• Suitable for CIP – no moving parts

• Low-cost way to rinse easy-to-remove residues

• Choice of 180° or 360° spray coverages

• Can be installed in any position

• 316L stainless steel construction permits use of a wide array of chemicals

• 63225-3A sanitary spray balls:

– Polished 32Ra interior and exterior surface finish

– Threadless and self-draining design prevents build-up

Ideal for Cleaning:




TankJet 63225-3A spray balls for tanks up to 13’ (4 m) in dia.

13' (4 m)tank dia.

Spray Angle 180° Up 180° Down 360°

Nozzle Type

63225 l

63225 - 3A l l l

Spray Coverage

note: Custom drilling available for 63225-3A; contact your local sales engineer.

A B E


TAnkJET® 63225 & 63225-3A FIXED SPRAy BALLS13' (4 m)tank dia.

Catalog 15 - 63225

Performance Data

Nozzle Type/SizeCapacity gpm (l/min)

Max. Tank Dia. ft (m)15 psi

(1.0 bar)22 psi

(1.52 bar)30 psi

(2.06 bar)

63225E-3/4-22-316L 22 (83) 27 (102) 31 (117) 10 (3.0)

63225E-1-32-316L 32 (121) 39 (148) 45 (170) 13 (4.0)

Nozzle Type/SizeCapacity gpm (l/min)

Max. Tank Dia. ft (m)15 psi

(1.0 bar)25 psi

(1.7 bar)40 psi (3 bar)

63225E-.75-1.5-40-3A 31 (115) 40 (151) 51 (192) 10 (3.0)

63225E-1-2-40-3A 31 (115) 40 (151) 51 (192) 13 (4.0)

63225A-1.5-2.5-40-3A 31 (115) 40 (151) 51 (192) 13 (4.0)

63225E-1.5-2.5-40-3A 31 (115) 40 (151) 51 (192) 13 (4.0)

63225E-1.5-3-40-3A 31 (115) 40 (151) 51 (192) 13 (4.0)

63225E-1.5-4-40-3A 31 (115) 40 (151) 51 (192) 13 (4.0)

Dimensions

63225

Nozzle Type/Size Inlet Tube Size A Ball Dia. B Length C Length D Length E Pin Dia. F

63225E-3/4-22-316L 3/4"2"

(51 mm)3.64"

(93 mm).51"

(13 mm)1.25”

(31.8 mm).13"

(3.3 mm)

63225E-1-32-316L 1"2.5"

(64 mm)4.40"

(112 mm).51"

(13 mm)1.56”

(39.6 mm).13"

(3.3 mm)

63225-3A

Nozzle Type/Size Inlet Tube Size A Ball Dia. B Length C Length D Length E Pin Dia. F

63225E-.75-1.5-40-3A 3/4"1-1/2"

(38.1 mm)2-17/32"

(64.3 mm)3/8"

(9.5 mm)1/4"

(6.4 mm)9/64"

(3.6 mm)

63225E-1-2-40-3A 1"2"

(50.8 mm)3-5/16"

(84.1 mm)3/8"

(9.5 mm)3/8"

(9.5 mm)9/64"

(3.6 mm)

63225A-1.5-2.5-40-3A 1- 1/2"2-1/2"

(63.5 mm)4-1/4"

(108 mm)1/4"

(6.4 mm)3/4"

(19.1 mm)13/64"

(5.2 mm)

63225E-1.5-2.5-40-3A 1- 1/2"2-1/2"

(63.5 mm)4-1/4"

(108 mm)1/4"

(6.4 mm)3/4"

(19.1 mm)13/64"

(5.2 mm)

63225E-1.5-3-40-3A 1- 1/2"3"

(76.2 mm)4-25/32"

(121.4 mm)1/4"

(6.4 mm)3/4"

(19.1 mm)13/64"

(5.2 mm)

63225E-1.5-4-40-3A 1- 1/2"4"

(101.6 mm)5-3/4"

(146 mm)1/4"

(6.4 mm)3/4"

(19.1 mm)13/64"

(5.2 mm)

AD

C

E

B

F

0211

A

D

C

EF

B



63225 e – 3/4 – 22 – 316l

I I I I INozzle Type

Coverage Type

Inlet Tube Size

Capacity Size

Material Code

tankJet 63225-3a tank cleaning nozzle

63225 e – .75 1.5 – 40 – 3a

I I I I I INozzle Type

Coverage Type

Inlet Tube Size

Ball Diameter

Capacity Size

3A Designation


TankJet® d41800e Fluid driven tank cleaning nozzleS

TAnkJET® D41800E FLuID DRIVEn TAnk CLEAnInG nOzzLES

Specifications


Flow rate range: 2.7 to 33 gpm (12 to 128 l/min)



Min. tank opening size: 1-1/4” (31 mm)


Inlet conn.: 3/8” nPT or BSPT, Dn19

compact, constant-Speed nozzles Provide Superior cleaning



• Rotates at nearly constant speed of 2 to 30 RPM over a wide range of fluid pressures

• up to four times higher impact than conventional rotating nozzles

• Perfect for cleaning, sanitizing and foaming applications; slow controlled rotational speed provides more dwell time on tank surface

• Compact – fits in most tank openings as small as 1-1/4” (31 mm)

• Patented self-flushing water bearing design eliminates internal bearings or races

• All 316 stainless steel construction for maximum wear resistance; meets the European ATEX standard for use in explosive environments

• Sanitary pin version conforms to 3A sanitary standard 78-01 for spray cleaning devices to remain in place

• Operates at high temperatures – up to 300°F (150°C)

Ideal for Cleaning:


• Dry powder tanks


• Mixing tanks


TankJet D41800E constant speed tank cleaning nozzles for tanks

up to 12’ (3.7 m) in dia.Sanitary pin connection conforms

to 3A standards for CIP

Spray Coverage

360°



TAnkJET® D41800E FLuID DRIVEn TAnk CLEAnInG nOzzLES



tankJet d41800e tank cleaning nozzle3/8" threaded connection

d41800e – 3/8 – 316l* 9.9I I I I

NozzleType

InletConn.

MaterialCode

CapacitySize

tankJet d41800e tank cleaning nozzledn19 Sanitary connection

d41800e – 19 – 316l* 9.9 – 3aI I I I l

NozzleType

InletConn.

MaterialCode

CapacitySize

3AVersion

NozzleType

InletConn. A B Dia. C Dia. D Dia. Weight

D41800E

3/8"3"

(78 mm)1-3/16"

(30 mm)27/32"

(21 mm) –

.28 lbs. (0.13 kg)

Dn193-7/32"

(82 mm)1-3/16"

(30 mm)27/32"

(21 mm).094"

(2.4 mm).29 lbs.

(0.13 kg)

Dimensions do not include connection pin length.

D

B

C

A

Performance Data

CapacitySize


30 psi (2 bar)

40 psi (3 bar)

100 psi (5 bar)

150 psi (10 bar)

230 psi (16 bar)

3.2 2.9 (10.8) 3.5 (14) 5.3 (17) 6.5 (24) 7.9 (30)

4.5 4.0 (15.1) 4.8 (19) 7.5 (24) 9.1 (34) 11.3 (43)

9.9 8.8 (33.2) 10.1 (40) 16.1 (52) 19.7 (73) 24 (93)

13.6 12.1 (45.7) 14.0 (55) 22 (71) 27 (101) 34 (128)

* Materials: Specify SS for Stainless Steel Type 303 (DIn1.4305). Specify 316L for Stainless Steel Type 316L (DIn1.4404).



Catalog 15 - D41800E0211




Slim and Sleek design ideal for Cleaning Tanks with Small Openings


• Fits in tank openings as small as 2" (51 mm) with 7/8" (22 mm) probe for even smaller keg or drum bungholes

• Sleek design helps prevent residue buildup and simplifies maintenance

• Carefully drilled solid stream orifices are strategically placed to provide four different spray coverages

• Fluid driven unit rotates at a slow speed of 3 to 15 rpm for increased dwell time on tank surface compared to free spinning units

• Suitable for CIP or portable installations

• Mount vertically, horizontally or at any angle

• Made of 316 stainless steel and PTFE material

Ideal for Cleaning:

• Chemical mixers/blenders

• Drums and kegs



• Tablet coating machines


TankJet 19 tank cleaner for tanks up to 12' (3.6 m) in dia.

Specifications



Rotation speed: 3 to 15 RPM


250°F (121°C)


2.0" (51 mm)

Spray coverage: 360°; 270°; 180° up and down

Inlet conn.: 3/4" NPT, BSPT (F)


H d

CG

Spray Coverage

180° Up 270° Down

180° Down 360°



Dimensions



TJ19 __* – Ci i i

Model No.

Inlet Type

Spray Coverage

Performance Data




Model No. Spray Coverage


50 psi (3.4 bar)

70 psi (4.8 bar)

90 psi (6.2 bar)

100 psi (6.9 bar)

120 psi (8.3 bar)

140 psi (9.7 bar)

160 psi (11 bar)

180 psi (12.4 bar)

200 psi (13.8 bar)

TJ-19

H 10 (38) 13 (49) 15 (57) 16 (61) 18 (68) 19.5 (74) 21 (79) 22.5 (85) 24 (91)

G 12 (45) 14 (53) 16.5 (62) 17.5 (66) 19 (72) 21 (79) 22.5 (85) 24 (91) 26 (98)

d 16 (61) 18 (68) 20 (76) 21 (79) 22.5 (85) 24 (91) 26 (98) 27.5 (104) 28.5 (108)

C 17 (64) 19 (72) 21 (79) 22 (83) 24 (91) 25.5 (97) 27.5 (104) 29 (110) 30 (114)

6.65" (169 mm)

1.97" (50 mm)

SolutioNS For tANkS Up to 10' (3 m) in Dia.

10'(3 m

)tank D

ia.

Spray Nozzles

Spray Control

Spray Analysis

Spray Fabrication


TankJet® 6353 & 6353-mfpFixed tank cleaning nozzleS

TAnkJET® 6353 & 6353-MFP FIXED TAnk CLEAnInG nOzzLES

Specifications


Flow rate range TankJet 6353: 8.9 to 60 gpm (35 to 230 l/min)

Flow rate range TankJet 6353-MFP: 25 to 80 gpm (93 to 301 l/min)




Materials TankJet 6353: Brass, 303 or 316 stainless steel

Materials TankJet 6353-MFP: Brass or 316 stainless steel


Inlet conn.: 1-1/2” nPT or BSPT (F)

Stationary cluster nozzles Provide robust and reliable cleaning


• Features 13 FullJet® nozzles for high-capacity cleaning

• Simple, reliable and does not contain any moving parts

• TankJet 6353-MFP provides increased cleaning action by using 3/8” Maximum Free Passage (MFP) FullJet nozzles; MFP design helps reduce clogging

• Individual nozzles can be replaced with plugs to provide specific cleaning coverages

• nozzles are easily removed for cleaning and inspection

• Can be installed in any position; special designs available for a wide range of coverages

Ideal for Cleaning:


• Process tanks

• Pulp chests

Spray Coverage

360°

TankJet 6353 nozzleUses 13 1/4” or 3/8” FullJet

full cone nozzles

TankJet 6353-MFP nozzleUses 13 3/8” FullJet full cone nozzles

TankJet 6353 and 6353-MFP tank cleaning nozzles for tanks up to

10’ (3 m) in dia.

10' (3 m)tank dia.


NozzleNo.

FullJet®

Nozzle No.Max. Free Pass

in. (mm)


20 psi (1.5 bar)

30 psi (2 bar)

40 psi (3 bar)

50 psi (3.5 bar)

6353 1/4 GG5 0.050 (1.3) 8.9 (35) 10.8 (40) 12.3 (48) 13.6 (52)

6353 1/4 GG10 0.063 (1.6) 17.9 (70) 22 (80) 25 (97) 27 (104)

6353 3/8 GG22 0.109 (2.8) 39 (155) 48 (177) 55 (215) 60 (230)

6353 3/8 HHMFP6014 0.125 (3.2) 25 (93) 29 (108) 31 (118) 33 (123)

6353 3/8 HHMFP6022 0.156 (4.0) 38 (143) 44 (167) 49 (187) 54 (204)

6353 3/8 HHMFP6032 0.188 (4.8) 55 (206) 65 (246) 73 (276) 80 (301)

TAnkJET® 6353 & 6353-MFP FIXED TAnk CLEAnInG nOzzLES


Performance Data

TankJet 6353


6353-1/4GG54-1/2"

(114 mm)4-1/2"

(114 mm)3.7 lbs. (1.6 kg)

6353-1/4GG104-1/2"

(114 mm)4-1/2"

(114 mm)3.7 lbs. (1.6 kg)

6353-3/8GG224-3/4"

(121 mm)5"

(127 mm)4.5 lbs. (2.0 kg)

TankJet 6353-MFP


6353-3/8HHMFP60144-1/2"

(114 mm)4-1/2"

(114 mm)3.7 lbs. (1.6 kg)

6353-3/8HHMFP60224-1/2"

(114 mm)4-1/2"

(114 mm)3.7 lbs. (1.6 kg)

6353-3/8HHMFP60324-1/2”

(114 mm)4-1/2"

(114 mm)3.7 lbs. (1.6 kg)

AA

BB



6353 – 1/4gg – 316SS 5I I I I

NozzleNo.

NozzleType

MaterialCode

CapacitySize


tankJet 6353-MFP tank cleaning nozzle

6353 – 3/8HHMFP – 316SS 14I I I I

NozzleNo.

NozzleType

MaterialCode

CapacitySize

10' (3 m)tank dia.

Catalog 15 - 63530211


TankJet® aa090 Motor driven tank cleaner


Specifications


Flow rate range: 1.5 to 7.3 gpm (5.7 to 28 l/min)



Min. tank opening size: 2.3” (59 mm)



Motor: Air, electric, explosion-proof electric

Shaft lengths: 1.5’, 3’, 4’ or 6’ (.5, .9, 1.2 or 1.8 m)

Provides High-impact cleaning and trouble-Free installation


• Versatile high-impact tank cleaner provides efficient, consistent, reliable cleaning with virtually no maintenance

• Customize for your cleaning operation. Choose: – Air (AG), electric (E) or explosion-proof (EP) electric motor – nozzle capacity size – 1.5’, 3’, 4’ or 6’ (.5, .9, 1.2 or 1.8 m) shaft length – Optional adjustable flange for precise positioning

of turret in tank• Solid stream spray nozzles rotate in multiple axes

and provide thorough cleaning and complete coverage of the entire tank

• Motor is positioned outside the tank away from harmful caustics

• Lightweight – can be installed permanently or easily moved from tank to tank

• Long wear life materials of construction – corrosion-resistant 316 stainless steel and PTFE fluoropolymer resin seals

Ideal for Cleaning:

• Drums

• Process tanks

• Totes

Spray Coverage

360°


TankJet AA090AG tank cleaner for tanks up to 8’ (2.4 m) in dia.

8' (2.4 m)tank dia.



MotorType

ACFrequency

Speed(rpm)

Current(amps)

Power(watts)


Cycle (min.)

Electric50 Hz. 3.1 0.39 41 11

60 Hz. 3.8 0.33 34 9

Explosion-Proof

50 Hz. 0.8 0.3 33 44

60 Hz. 1.0 0.3 28 35

Cycle Time Data – Electric Motor (E and EP)Cycle Time Data – Air Motor (AG)

Air Pressurepsi (bar)

AirConsumptionscfm (l/min)

Approx.Speed(rpm)

Approx. Time for One Complete Cycle

(min.)

5 (0.34) 1.4 (40) 3.2 10

7 (0.48) 2.0 (57) 6 5.5

10 (0.68) 3.1 (88) 8.2 4

Model no. ExtensionLength

Overall Length Weight

AA090AG-1.5 1.5' (0.5 m) 35" (0.8 m) 12-1/2 lbs. (5.7 kg)

AA090AG-3 3' (0.9 m) 53" (1.3 m) 14 lbs. (6.4 kg)

AA090AG-4 4' (1.2 m) 65" (1.6 m) 15-1/2 lbs. (7 kg)

AA090AG-6 6' (1.8 m) 89" (2.2 m) 18-1/2 lbs. (8.4 kg)

Dimensions and Weights – Air Motor (AG)

Model no. ExtensionLength

Overall Length Weight

AA090E-1.5 1.5' (0.5 m) 29-5/8" (0.7 m) 12-1/2 lbs. (5.7 kg)

AA090E-3 3' (0.9 m) 47-5/8" (1.2 m) 14 lbs. (6.4 kg)

AA090E-4 4' (1.2 m) 59-5/8" (1.5 m) 15-1/2 lbs. (7 kg)

AA090E-6 6' (1.8 m) 83-5/8" (2.1 m) 18-1/2 lbs. (8.4 kg)

Dimensions and Weights – Electric Motor (E)

Model no. ExtensionLength Overall Length Weight

AA090E-EP-1.5 1.5' (0.5 m) 32-5/8" (0.8 m) 20 lbs. (9.1 kg)

AA090E-EP-3 3' (0.9 m) 50-5/8" (1.3 m) 22 lbs. (10 kg)

AA090E-EP-4 4' (1.2 m) 62-5/8" (1.6 m) 23 lbs. (10.5 kg)

AA090E-EP-6 6' (1.8 m) 86-5/8" (2.2 m) 26 lbs. (11.8 kg)

Dimensions and Weights – Explosion-Proof Motor (EP)


tankJet aa090 tank cleaner


aa090e – 3 + W 0005I I I I

TankCleaner

Type

ExtensionLength

NozzleType

CapacitySize

Add B after AA in the tank cleaner type and prior to nozzle inlet connection for BSPT connections.

Performance DataTotal Flow of Two Nozzles (Equal Capacity) gpm or l/min Liquid Inlet Pressure*

Nozzle No. 100 psi (7 bar)

200 psi (15 bar)

300 psi (20 bar)

400 psi (30 bar)

500 psi (35 bar)

W0005 1.5 (5.7) 2.0 (7.6) 2.4 (9.1) 2.8 (10.6) 3.2 (12.1)

W0010 2.7 (10.2) 3.7 (14.0) 4.5 (17.0) 5.1 (19.3) 5.8 (22.0)

W0014 3.5 (13.2) 4.7 (17.8) 5.8 (22.0) 6.6 (25.0) 7.3 (28.0)

*note: Flow rates tabulated above include pressure drop through unit.


1.1" (29 mm) .84" (22 mm)

.11" (3 mm)

.73" (18 mm)

2.0" (51 mm)

Spray Head Tank Diameter Opening

8' (2.4 m)tank dia.



TankJet® 18250a Fluid driven tank cleaning nozzle

TAnkJET® 18250A FLuID DRIVEn TAnk CLEAnInG nOzzLE

Specifications

Max. tank dia. 8’ (2.4 m)






Inlet conn.: 3/4” nPT or BSPT (F)

Ryton® is a registered trademark of Chevron Phillips Chemical Company LLC.

rotating nozzle Provides complete orbital coverage



• Precisely positioned orifices provide complete coverage of all interior surfaces

• Can be installed horizontally or vertically

• Constructed for long wear life using corrosion-resistant materials – 316 stainless steel with Ryton® (polyphenylene sulfide and kolsterized stainless steel) bearing retainers and sleeves of 50% stainless steel PTFE

• Optimize cleaning performance by using single-pass or particulate-free cleaning liquid

• Can withstand temperatures up to 350°F (177°C)

Ideal for Cleaning:

• Barrels

• Chemical tanks

• Food vats

• Processing vessels

Spray Coverage

360°

TankJet 18250A tank cleaning nozzle for

tanks up to 8’ (2.4 m) in dia.

8' (2.4 m)tank dia.




NozzleNo.


10 psi (1 bar)

20 psi (1.5 bar)

30 psi (2 bar)

40 psi (2.5 bar)

50 psi (3 bar)

60 psi (4 bar)

18250A-316SS21-316SS 10.5 (48) 14.8 (59) 18.2 (68) 21 (76) 23 (83) 26 (96)

18250A-316SS45-316SS 23 (103) 32 (126) 39 (145) 45 (162) 50 (178) 55 (205)

Performance Data

Nozzle No. A B C Hex. Weight

18250A5-29/64"

(138.4 mm)4-35/64"

(115.5 mm)2-6/13"

(53.6 mm)1-5/8"

(34.9 mm)1.6 lbs.

(0.73 kg)

A

C

B

tankJet 18250a tank cleaning nozzle

18250a – 316SS 45 – 316SSI I I I

NozzleType

Bearingsand Races

Material Code

CapacitySize

MaterialCode

Add B prior to the nozzle type connection for BSPT connections.


8' (2.4 m)tank dia.

Catalog 15 - 18250A0211

Hex.


TankJet® 30473 Fluid driven tank cleaning nozzle

TAnkJET® 30473 FLuID DRIVEn TAnk CLEAnInG nOzzLE

Specifications






Spray coverage: Approx. 360°, 180° up, 180° down

Inlet conn.: 1/4” nPT or BSPT (M)

rotating Miniature PtFe nozzles rinse Small containers


• The reactionary force of cleaning liquid rotates the nozzle – no motor required

• Features a rotating spray head that can be easily removed from the body for inspection and maintenance

• Long wear life – PTFE resists aggressive cleaning liquids

• Fits into tank openings as small as 1” (25 mm)

• Lightweight – weighs only 0.5 oz. (0.02 kg)

Ideal for Cleaning:


• Cylinders

• Ducts

• Pipes

TankJet 30473 tank cleaning nozzle for


8' (2.4 m)tank dia.

NozzleNo.


10 psi (0.7 bar)

20 psi (1.5 bar)

30 psi (2 bar)

40 psi (3 bar)

50 psi (4 bar)

30473-1/4-TEF 2.1 (7.8) 2.9 (11.3) 3.5 (13) 4.0 (15) 4.5 (18)

Performance Data


30473 e – 1/4 – teFI I I I

NozzleType

Coverage Type

InletConn.

MaterialCode





304731-3/4"

(44.4 mm)7/8"

(22.3 mm)0.5 oz.

(0.02 kg)

B Dia.

A

Catalog 15 - 30473

A E

Spray Coverage

180° Up 180° Down 360°

B

0211


TankJet® d41892 Fluid driven tank cleaning nozzle

TAnkJET® D41892 FLuID DRIVEn TAnk CLEAnInG nOzzLE

Specifications

Max. tank dia.: 6.5’ (2.0 m)






Inlet conn.: 3/8”, 1/2” nPT or BSPT (F)

lightweight Plastic nozzles Provide effective rinsing



• 360° spray coverage rinses entire tank

• nozzle and flat spray inserts constructed of POM and PVDF for durability and corrosion resistance

• Lightweight – weighs just 1.4 oz. (0.04 kg)

• CIP connection and ATEX-certified versions available upon request Ideal for Cleaning:


• Food containers

• Mixing tanks

Spray Coverage

360°

TankJet D41892 tank cleaning

nozzle for tanks up to 6.5’

(2 m) in dia.

6.5' (2 m)tank dia.

NozzleNo.


20 psi (1.5 bar)

30 psi (2 bar)

40 psi (2.5 bar)

50 psi (3 bar)

60 psi (4 bar)

70 psi (5 bar)

D41892-POM-64.0

(15.9)4.9

(18.3)5.7

(20.5)6.4

(22.5)7.0 (26)

7.5 (29)

Note: Recommended operating pressure is 30 to 60 psi (2 to 4 bar).

Performance Data



d41892 – 1/2 – PoM – 6

I I I INozzleType

InletConn.

MaterialCode

CapacitySize



Nozzle No. A B Weight

D418922.7"

(68 mm)1.46"

(37 mm)1.4 oz.

(0.04 kg)

B

A

Catalog 15 - D418920211


TankJet® d41990Micro tank cleaning nozzle

TAnkJET® D41990 MICRO TAnk CLEAnInG nOzzLE

Specifications

Max. tank dia. 6.5 ft (2.0 m)





1” (25 mm) thread 2” (50 mm) CIP version

Spray coverage: 180° up, 180° down, 360°

Inlet conn.: 3/8 nPT or BSPT, CIP 182

Weight: 1.9 oz. (54 g)

rotating nozzle Provides complete coverage


• Low pressure, low volume rinsing of small tanks and containers up to 6.5’ (2 m)

• Fluid driven reactionary force nozzle – no motor source needed to drive spray head

• Micro-size nozzle fits into very small tank openings – as small as 1” (25 mm)

• All 316L stainless steel construction for long wear life and corrosion resistance

• Suitable for high temperature applications up to 300°F (149°C)

• Can be installed vertically or horizontally

Ideal for Cleaning:

• Chemical tanks

• Beverage tanks

• Canisters

• Food tanks

• Keg/drum

• Tote/container

6.5' (2 m)tank dia.

A E

Spray Coverage

180° Up 180° Down 360°

B

TankJet D41990 micro tank cleaning nozzle for tanks up

to 6.5’ (2 m) in dia.


TAnkJET® D41990 MICRO TAnk CLEAnInG nOzzLE

Capacity SizeCapacity gpm (l/min)

15 psi (1 bar)

20 psi (1.5 bar)

30 psi (2 bar)

40 psi (2.5 bar)

50 psi (3 bar)

60 psi (4 bar)

3.2 2.5 (9.4) 2.7 (10.5) 3.1 (11.5) 3.4 (12.4) 3.6 (13.2) 3.9 (14.7)

4.5 3.4 (12.7) 3.7 (14.4) 4.3 (15.9) 4.7 (17.3) 5.1 (18.5) 5.5 (20.7)

6 4.5 (16.9) 4.9 (19.2) 5.7 (21) 6.3 (23) 6.8 (25) 7.3 (28)

Performance Data

Nozzle No. InletConnection A B C

D41990

3/8”0.7”

(18 mm)2.4”

(60 mm)0.79”

(20 mm)

CIP 1820.7”

(18 mm)2.5”

(63 mm)0.84”

(21.2 mm)

d41990 tank cleaning nozzle

d41990 e – 3/8 – 316l – 3.2I I I I I

NozzleType

Coverage Type

Connection Size

Material Code

Capacity Size

Add B prior to inlet connection for BSPT connections.


6.5' (2 m)tank dia.

Catalog 15 - D41990

Dimensions

C

B

A

0211

SolutioNS For tANkS Up to 5' (1.5 m) in Dia.

Spray Nozzles

Spray Control

Spray Analysis

Spray Fabrication

5'(1.5 m

)tank D

ia.


TankJet® 21400a Fluid driven tank cleaning nozzle


Specifications

Max. tank dia. 5’ (1.5 m)







Ryton® is a registered trademark of Chevron Phillips Chemical Company LLC.

compact rotating nozzle Provides complete coverage



• Precisely positioned orifices provide complete orbital coverage of all interior surfaces

• Can be installed vertically or horizontally

• Constructed for long wear life using corrosion-resistant materials – 316 stainless steel with Ryton® (polyphenylene sulfide) and kolsterized 316 stainless steel bearing retainers; sleeves of 50% stainless steel PTFE

• Optimize cleaning performance by using single-pass or particulate-free cleaning liquid


Ideal for Cleaning:

• Barrels

• Chemical tanks

• Food vats

• Processing vessels

Spray Coverage

360°

TankJet 21400A tank cleaning nozzle for tanks up

to 5’ (1.5 m) in dia.

5' (1.5 m)tank dia.




NozzleNo.


10 psi (1 bar)

20 psi (1.5 bar)

30 psi (2 bar)

40 psi (2.5 bar)

50 psi (3 bar)

60 psi (4 bar)

21400A-316SS10-316SS 5.0 (23) 7.1 (28) 8.7 (32) 10 (36) 11.2 (39) 12.2 (46)

21400A-316SS18-316SS 9.0 (41) 12.7 (50) 15.6 (58) 18 (65) 20 (71) 22 (82)

Performance Data

Nozzle No. A B C Hex. Weight

21400A5-9/32"

(134 mm)4-25/64"

(111.5 mm)1-3/4"

(44.5 mm)1-5/8"

(34.9 mm)1.5 lbs.

(0.68 kg)

A

B

C

tankJet 21400a tank cleaning nozzle

21400a – 316SS 18 – 316SS

I I I INozzleType

Bearingsand Races

Material Code

CapacitySize

MaterialCode

Add B prior to the nozzle type for BSPT connections.


5' (1.5 m)tank dia.

Catalog 15 - 21400A0211

Hex.


TankJet® VSM Fixed Tank Cleaning nozzle

TankJeT® VSM Fixed Tank Cleaning nozzle

Specifications

Max. tank dia.: 5' (1.5 m)


Pressure range: 10 to 150 psi (.7 to 10 bar)


Min. tank opening size: 2" (51 mm)


Material: nylon

Inlet conn.: 1/2" or 3/4" nPT or BSPT (F)

lightweight Spray Balls ideal for low Pressure Rinsing


• Stationary nozzles ideal for rinsing small vessels

• Suitable for CIP – no moving parts

• 240° spray coverage via 40 spray orifices


• Economical, effective rinsing

• Nylon construction provides excellent chemical resistance

Ideal for Cleaning:


• Pharmaceutical vats

Spray Coverage

240° down

TankJet VSM tank cleaning nozzle for


5' (1.5 m)Tank dia.



TankJeT® VSM Fixed Tank Cleaning nozzle

Nozzleno.

Max. Free Passin. (mm)


10 psi (0.7 bar)

20 psi (1.5 bar)

40 psi (3 bar)

60 psi (4 bar)

80 psi (5 bar)

100 psi (7 bar)

130 psi (9 bar)

150 psi (10 bar)

VSM-1/2-28 0.031 (0.8) 2.7 (10.4) 3.9 (15.3) 5.5 (22) 6.7 (25) 7.8 (28) 8.7 (33) 9.9 (38) 10.6 (40)

VSM-1/2-44 0.039 (1.0) 4.3 (16.3) 6.1 (24) 8.6 (34) 10.6 (39) 12.2 (44) 13.7 (52) 15.6 (59) 16.7 (62)

VSM-1/2-90 0.059 (1.5) 8.8 (33) 12.5 (49) 17.7 (70) 22 (81) 25 (90) 28 (107) 32 (121) 34 (127)

VSM-3/4-90 0.059 (1.5) 8.8 (33) 12.5 (49) 17.7 (70) 22 (81) 25 (90) 28 (107) 32 (121) 34 (127)

VSM-1/2-140 0.077 (1.95) 13.7 (52) 19.4 (77) 28 (108) 34 (125) 39 (140) 43 (166) 50 (188) 53 (198)

VSM-3/4-140 0.077 (1.95) 13.7 (52) 19.4 (77) 28 (108) 34 (125) 39 (140) 43 (166) 50 (188) 53 (198)

VSM-1/2-190 0.091 (2.3) 18.6 (71) 26 (104) 37 (147) 46 (170) 53 (190) 59 (225) 67 (254) 72 (269)

VSM-3/4-190 0.091 (2.3) 18.6 (71) 26 (104) 37 (147) 46 (170) 53 (190) 59 (225) 67 (254) 72 (269)

Performance Data

Nozzle No. Inlet Conn.nPT or BSPT a dia. B C Weight

VSM

1/2" F1-1/4"

(31.2 mm)1-11/16" (45 mm)

1" (26 mm)

3 oz. (0.08 kg)

3/4" F1-7/8"

(47 mm)2-7/16"

(62 mm)1-1/2"

(40 mm)8 oz.

(0.225 kg)

TankJet VSM Tank Cleaning nozzle

VSM – 3/4 140

i i iNozzleType

InletConn.

CapacitySize



C

B

A

5' (1.5 m)Tank dia.

Catalog 15 - VSM0211


TankJet® M60MOBILE TANK CLEANER

TANKJET® M60 MOBILE TANK CLEANER

Specifications

Max. tank dia.: 5' (1.5 m)


Cycle time: Under 5 min.

Max. operating liquid pressure:

1000 psi (69 bar)

Max. liquid temp.: 180°F (82°C)

Min. tank opening: 1.75" dia. (44.5 mm)

Weight: 26 lbs. (11.8 kg)

Liquid conn.: 3/8" NPT or BSPT (F)

Air line conn.: 1/4" NPT or BSPT (F)

Fast and Powerful Cleaning of Barrels, Drums and Other Vessels


• Powerful cleaning using low flow rates• Removes tough residues quickly and effectively;

solid stream sprays rotate in multiple axes for complete and thorough coverage

• Mobile - can easily be moved from one barrel or drum to the next

• Fast cycle time; less than 5 minutes. One full cycle completed every 16 revolutions

• Compact – fits in openings as small as 1-3/4" (44.5 mm) and easily inserted into standard bung hole openings

• Compatible with a variety of pumps including pressure washers

• Material construction in contact with fluid - 316 stainless steel, carbon graphite PTFE filled PEEK, EPDM, and PTFE

• Non-lubricated air motor driven for continuous and reliable operation

• Easy to operate and rebuild

Ideal for Cleaning:

• Wine barrels

• Food and beverage barrels

• Chemical and storage barrels

• Drums and kegs

• Small tanks and containers

Spray Coverage

360°

TankJet M60 tank cleaner for tanks up to 5’ (1.5 m) in dia.

5' (1.5 m)Tank Dia.


TANKJET® M60 MOBILE TANK CLEANER

Performance Data

A B C D E F G Weight

35.0" (89.1 cm)

21.4" (54.3 cm)

29.0" (74.2 cm)

25.5" (64.7 cm)

7.0" (17.7 cm)

10.4" (26.5 cm)

9.25" (23.5 cm)

26 lbs. (11.8 kg)

5' (1.5 m)Tank Dia.

Catalog 15 - TankJet M60O615

TankJet M60 Tank Cleaner

TJM60AG – 055

I IModel No. Nozzle

Orifice Size

Add B for BSPT connections after the model no.


Cycle Time Data Non-Lubricated Air Motor


Model No.


100 psi (7 bar)

200 psi (15 bar)

300 psi (20 bar)

400 psi (30 bar)

500 psi (35 bar)

700 psi (50 bar)

1000 psi (70 bar)

TJM60AG-046 1.1 (4.2) 1.6 (6.1) 1.9 (7.1) 2.2 (8.7) 2.5 (9.4) 2.9 (11.2) 3.5 (13.3)

TJM60AG-055 1.6 (6.0) 2.3 (8.8) 2.8 (10.2) 3.2 (12.5) 3.6 (13.4) 4.2 (16.1) 5.0 (19.0)

TJM60AG-060 1.9 (7.2) 2.7 (10.5) 3.3 (12.1) 3.8 (14.8) 4.2 (16.0) 5.0 (19.1) 6.0 (22.6)

TJM60AG-066 2.3 (8.7) 3.2 (12.7) 4.0 (14.6) 4.6 (17.9) 5.1 (19.4) 6.1 (23.1) 7.2 (27.4)

TJM60AG-078 3.2 (12.1) 4.5 (17.7) 5.5 (20.4) 6.4 (25.0) 7.2 (27.0) 8.5 (32.3) 10.1 (38.3)

Air Pressure psi (bar)

Air Consumption scfm (l/min)

Approx. Speed (rpm) 1000 psi/180°F (70 bar/82°C)

Approx. Time for One Complete Cycle (min.)

10 (.7) 3.9 (108) 3.5 4.5

12 (.85) 4.7 (136) 4.5 3.5

15 (1) 5.9 (162) 6.0 2.7

20 (1.4) 7.8 (224) 9.5 1.7

*Cycle time refers to the time it takes to complete one full cycle. One full cycle is completed every 16 revolutions.

F

E

B

A

D

C

G




Specifications

Max. tank dia.: 3’ (.9 m)





23240-2 spray coverage: side sprays

23240-3 spray coverage: 360°


compact, rotating nozzles Provide efficient rinsing of Barrels and kegs


• Choose from two designs: 23240-2 has two flat sprays that produce the self-rotating force and side sprays. 23240-3 adds a third spray via a top orifice to provide nearly full spherical spray coverage

• Long wear life – nozzle is constructed of 316 stainless steel with bearings and races made of specially-hardened 316 stainless steel

• Standard internal 50% stainless steel filled PTFE sleeve or optional PTFE sleeve


Ideal for Cleaning:

• Barrels

• Cylinders

• Ducts

• Kegs

• Pipes

• Tubes

TankJet 23240 tank cleaning nozzle for tanks up to

3’ (0.9 m) in dia.

3' (0.9 m)tank dia.

Spray Coverage

360° Side Spray




NozzleNo.


20 psi(1.5 bar)

40 psi(3 bar)

60 psi(4 bar)

80 psi(5 bar)

100 psi(6 bar)

120 psi(8 bar)

150 psi(10 bar)

200 psi(12 bar)

23240-2-316SS-5-316SS 3.5 (14) 5.0 (19.7) 6.1 (23) 7.1 (25) 7.9 (28) 8.7 (32) 9.7 (36) 11.2 (39)

23240-2-316SS-8-316SS 5.7 (22) 8.0 (32) 9.8 (36) 11.3 (41) 12.6 (45) 13.9 (52) 15.5 (58) 17.9 (63)

23240-3-316SS-5.7-316SS 4.0 (15.9) 5.7 (22) 7.0 (26) 8.1 (29) 9.0 (32) 9.9 (37) 11.0 (41) 12.7 (45)

23240-3-316SS-7-316SS 4.9 (19.5) 7.0 (28) 8.6 (32) 9.9 (36) 11.1 (39) 12.1 (45) 13.6 (50) 15.7 (55)

23240-3-316SS-10-316SS 7.1 (28) 10.0 (39) 12.2 (46) 14.1 (51) 15.8 (56) 17.3 (64) 19.4 (72) 22 (79)

Performance Data


NozzleNo. A B Dia. Weight

232403-1/2"

(89 mm)1"

(25.4 mm)8 oz.

(0.23 kg)

A

B


23240 – 2 – 316SS – 5 – 316SS

I I I I INozzleType

CoverageType

Bearingsand Races

Material Code

CapacitySize

MaterialCode


3' (0.9 m)tank dia.

Catalog 15 - 232400211


Spray Coverage

210° 360°



Specifications






Spray coverage: 21 orifice version for 360° coverage 15 orifice version for 210° coverage

Materials: Brass, 303 stainless steel, mild steel, 316 stainless steel

Inlet conn.: 1” nPT or BSPT (M)

Stationary, Self-draining nozzle ideal for Barrel rinsing


• Stationary design – no moving parts

• Choose 21 orifices for 360° coverage or 15 orifices for 210° coverage


• Durable, corrosion-resistant design

• 3/4” (19 mm) neck allows drainage during washing

Ideal for Cleaning:

• Barrels

• Containers

• Drums

• Kegs

• Tubes

• Vessels



#3 _ _ full cone tips and vanes For 3150-21- _ _ (Qty. 20) For 3150-15- _ _ (Qty. 14) the bottom ring of full cone tips is eliminated

1/4 G10 cap and vane (Qty. 1)

3' (0.9 m)tank dia.




NozzleNo.

Max. Free Passage in. (mm)


10 psi (1 bar)

20 psi (2 bar)

30 psi (3 bar)

40 psi (4 bar)

60 psi (5 bar)

80 psi (6 bar)

100 psi (7 bar)

150 psi (10 bar)

3150-15 0.040 (1.0) 5.2 (23) 7.2 (32) 8.7 (39) 9.9 (44) 12.1 (49) 13.8 (54) 15.3 (57) 19.0 (67)

3150-21 0.040 (1.0) 7.0 (31) 9.8 (43) 11.7 (52) 13.3 (59) 16.2 (66) 18.5 (73) 21 (77) 26 (91)

Performance Data



3150 – SS 15I I I

Nozzle Type

Material Code

Number ofFull Cone Spray Tips


NozzleNo. A Dia. B C Dia. Weight

31501-11/16"(43 mm)

6-9/16"(167 mm)

3/4"(19 mm)

1-1/2 lbs.(0.68 kg)

A

BC

3' (0.9 m)tank dia.

Catalog 15 - 31500211




Specifications


Flow rate range: .8 to 2.2 gpm (3.4 to 7.9 l/min)




Spray coverage: Side sprays


compact, rotating nozzles Provide cylindrical coverage


• Two flat sprays produce the self-rotating force to drive the nozzle and provide side sprays for cylindrical coverage

• Can be mounted in any position

• Long wear life – nozzles are available in stainless steel and hardened stainless steel bearings and races

• Choice of brass, mild steel and 303 or 316 stainless steel

Ideal for Cleaning:

• Cylinders

• Ducts

• Pipes



Spray Coverage

Side Sprays

3' (0.9 m)tank dia.




NozzleNo.


10 psi (1 bar)

20 psi (1.5 bar)

30 psi (2 bar)

40 psi (2.5 bar)

50 psi (3 bar)

60 psi (4 bar)

36640-1.7-SS 0.8 (3.4) 1.2 (4.9) 1.5 (5.3) 1.7 (6.1) 1.9 (6.8) 2.2 (7.9)

Performance Data

Nozzle No. A B Dia. C Hex. Weight

366401-7/8"

(47.6 mm)1"

(25.4 mm)1-9/16"

(39.7 mm)7/8"

(22.2 mm)3 oz.

(0.09 kg)

AC

B


36640 – 1.7 – SSI I I

NozzleType

CapacitySize

MaterialCode



3' (0.9 m)tank dia.

Catalog 15 - 366400211

Hex.




Specifications

Max. tank dia.: 2’ (.6 m)

Flow rate range: 5.5 to 11.7 gpm (23 to 43 l/min)




Spray coverage: 21 orifice version for 360° coverage 15 orifice version for 210° coverage

Inlet conn.: 1” nPT or BSPT (M)

Stationary, Self-draining nozzle ideal for keg rinsing


• Stationary design – no moving parts

• Choose 21 orifices for 360° coverage or 15 orifices for 210° coverage

• Reduced neck allows drainage during cleaning


• Durable, corrosion-resistant design; choice of 303 or 316 stainless steel

Ideal for Cleaning:

• Containers

• Drums

• Kegs

• Pipes

• Tubes

Spray Coverage

210° 360°

#1.5-SS full cone tips and #1-SS vanes

For 15498-21-SS (Qty. 20)For 15498-15-SS (Qty. 14)

the bottom ring of full cone tips is eliminated#3-SS full cone tip

and vane (Qty. 1)

TankJet 15498 tank cleaning nozzle for


2' (0.6 m)tank dia.




NozzleNo.

Max. Free Passagein. (mm)


60 psi (5 bar)

80 psi (6 bar)

100 psi (7 bar)

150 psi (10 bar)

15498-15-SS 0.094 (2.4) 5.5 (23) 6.3 (25) 7.0 (26) 8.5 (31)

15498-21-SS 0.094 (2.4) 7.7 (31) 8.7 (34) 9.6 (36) 11.7 (43)

Performance Data

NozzleNo. A Dia. B C Dia. Weight

154981-3/8"

(35 mm)6-1/8"

(156 mm)5/8"

(16 mm)1-1/8 lbs.(0.51 kg)

A

BC


15498 – 15 – SSI I I

NozzleType

Number ofFull Cone Spray Tips

MaterialCode



2' (0.6 m)tank dia.

Catalog 15 - 154980211

Additional Products & Accessories

Spray nozzles

Spray Control

Spray analysis

Spray fabrication

Additional P

roducts &

Accessories



STRAInERS FOR TAnkJET® PRODuCTS

Model TW Strainer

Model TW Strainer

Strainers for TankJet® productsensure trouble-Free Performance


• Reduce clogging in tank cleaners and tank cleaning nozzles

• Remove contaminants from liquid to ensure continuous movement of rotating spray heads

• Extend wear life of nozzles, valves and pumps

• Wide range of options: heavy duty, heavy duty high pressure, self cleaning and a wide range of mesh sizes

Model TW:

– Large open screen area for efficient liquid straining

– Designed for minimal maintenance

– Removable bottom cap or plug for complete withdrawal of entire screen assembly

– Bottom pipe plug can be replaced with a drain cock for quick-flush cleaning

Model TWC – same features as TW plus:

– Handles large flow rates with minimal pressure drop

– 1” plugged top outlet is provided for pressure gauge installation

Model 8310A:

– Designed for high pressure operation

– Removable bottom pipe plug provides an easy method for flush cleaning

Self-Cleaning Strainers for high flow applications:

– Allows use of poor quality water with minimal risk of nozzle clogging

– Choice of models and styles – flow rates up to 1760 gpm (6662 l/min)

– Large filter area captures most debris extending time between flush cycles

– Minimal water used for flushing – downstream water supply is not interrupted

– Easy to use and maintain

Self-Cleaning Strainer



STRAInERS FOR TAnkJET® PRODuCTS

Strainer Compatibility Chart

Part No. Description

1/2TW Heavy Duty

Strainer

1TW Heavy Duty

Strainer

1-1/2TW Heavy Duty

Strainer

2-1/2TW Heavy Duty

Strainer

3TWCHeavy Duty

Strainer

8310A-1/2 Heavy Duty

Strainer

TankJet 360 Tank Cleaner l


TankJet AA290 Tank Cleaner l l





TankJet 27500/28500 Nozzles l l l

TankJet 12900 Nozzle l l l l

TankJet D26984/ D40159 nozzles

l l

TankJet D41800E nozzle l l

TankJet 6353 Nozzle l l


TankJet 18250A nozzle l l

TankJet D41892 nozzle l l

TankJet D41990 nozzle l

TankJet 21400A nozzle l l

TankJet 15498/3150 Nozzles l l

TankJet 36640 Nozzle l

TankJet 23240 Nozzle l l

Installation Suction or Pressure Side of Pump up to 130 psi (9 bar) Pressure Side

Max. flow rate with .035 bar pressure drop

11 gpm(42 l/min)

31.4 gpm (119 l/min)

71.6 gpm (271 l/min)

136.6 gpm (517 l/min)

—21.1 gpm (80 l/min)

with 36.2 psi (2.5 bar) pressure

Ask your local sales engineer for more information about our self-cleaning strainers.

Catalog 15 - Strainers

Mesh to Micron Conversion ChartMesh Recommendations

Nozzle Type Mesh Recommendation

Motor Driven Tank Cleaner 100 min.

Fluid Driven (Turbine) 30 to 50

Fluid Driven (Reactionary Force

and Constant Speed)200 min.

Fixed StationaryRefer to Mesh to Micron

Conversion Chart

Mesh Micron Inches (mm)

16 1191 0.0469 (1.2)

20 840 0.0331 (.84)

30 590 0.0232 (.58)

50 297 0.0117 (.29)

60 250 0.0098 (.24)

80 177 0.0070 (.17)

100 149 0.0059 (.14)

200 74 0.0035 (.08)

0211



TAnk CLEAnInG LAnCES

Tank cleaning lance with unique constant speed TankJet D40159 for cleaning and rinsing

Tank Cleaning lances

Specifications

TankJet® tank cleaning nozzle:

Select any TankJet nozzle or spray ball

Connections: Select nPT or BSPT connections, cam lock connections, raised face flanges or tri-clamp fittings

Pipe/tube size and length:

Specify


Specify material for each component – stainless steel, PTFE, PVDF, brass, polypropylene

ensure efficient Fluid delivery to tank cleaning nozzles


• Specify to your requirements: type of tank cleaning nozzle, pipe length, flange type/connections, material

• Working with a single supplier ensures optimal performance and offers convenience

Tank cleaning lance with TankJet 63225 spray ball can be installed in any direction for 180° or 360° spray coverage in tanks up to 13’ (4 m) dia.

Tank cleaning lance with TankJet 6353 nozzle for gentle rinsing

Catalog 15 - Tank Cleaning Lances0211



RetRactable tank WasheR (RtW)

Automates Tank Cleaner Insertion and Retraction from Tank


• Pneumatic retraction mechanism lowers and raises the tank cleaner from the tank eliminating the need for manual labor

• Eliminates clogging resulting from residue build-up on nozzle hub when tank washers are permanently installed in the tank

• Variable stroke lengths for cleaning: 3', 4' and 6' (.9, 1.2 and 1.8 m)

• Easy-to-use, manual panel controls the insertion/retraction of the RTW and nozzle rotation. The panel can be upgraded to include isolation valve actuation

• Control box/panel can be located away from the tank for safety or convenience. Position indicators on the panel show when the tank washer is fully inserted or retracted

• Optional isolation valve ensures liquid cannot escape from the tanks when tank washer is retracted and maintains pressure inside the vessel. Indicators show when valve is open or closed

• The retractable tank washer, optional isolation valve and manual control panel are completely air operated

Ideal for Cleaning:

• Cosmetic tanks

• Food vats


• PTFE, latex, acrylic, polymer, paint and other chemical reactors

Contact your local sales engineer for performance data.

Retractable Tank Washer (RTW)

Specifications

Max. tank dia.:High-pressure version: 40’ (12 m) Standard version: 34’ (10 m)

Max. flow rate:High-pressure version: 21 gpm (80 l/min) Standard version: 44 gpm (170 l/min)

Max. pressure:High-pressure version: 4000 psi (275 bar) Standard version: 500 psi (35 bar)


140°F (60°C)

Cycle time: 2.1 to 11 min

Spray coverage:

360°

Inlet conn.:High-pressure version: ½” NPT or BSPT (F) Standard version: 1” NPT or BSPT (F)

Stroke lengths: 3’, 4’ and 6’ (.9, 1.2 and 1.8 m)

Wetted parts:316 and 304 stainless steel, synthetic rubber hose, PTFE, Viton®*

Weight: 187 to 253 lbs. (85 to 115 kg)*High-pressure version only. Viton® is a registered trademark of DuPont Performance Elastomers.

Retractable Tank Washer for tanks up to 40’ (12 m) in dia.

Controller



Retractable Tank Washer

High Pressure THA-300

Standard AA190

Nozzle Capacity Size

High Pressure 06, 10, 15, 20

Standard 10, 15, 20, 25, 30, 35, 40, 50, 60, 70, 80

Isolation Valve

No Isolation Valve

Isolation Valve

Manual Control Panel

Without Isolation Valve Actuation

With Isolation Valve Actuation

Stroke Length

3' (0.9 m)

4' (1.2 m)

6' (1.8 m)

RetRactable tank WasheR (RtW)

Retractable Tank Washer Options:

Catalog 15 - RTW

Specifications

• Variable stroke lengths: 3’, 4’ and 6’ (.9, 1.2 and 1.8 m)

• Flange: 4” 150# ANSI®

• Designed to operate in a vertical position

ANSI® is a registered trademark of American National Standards Institute.

Standard RTW fully extended

Standard RTW fully retracted

1111

AIR MOTOR

NOZZLEUP DOWN

NOZZLEUP DOWN

NOZZLEUP DOWN

+

Manual Control

Manual Control Panel

RTW



TankJeT® BX InJecTor

Efficient Transformation of Steam and Cold Water into High-Pressure, High-Temperature Liquid Feeds


• Ideal feed device for tank cleaning machines and custom-designed nozzle manifolds

• Non-intrusive: suitable for use with cold, low-pressure city water and existing plant steam

• Produces a high-pressure, high-temperature liquid discharge stream

• Increased pressure provides higher impact for cleaning tough residues

• Higher temperature speeds cleaning by quickly breaking down soil

• Eliminates the need for expensive pumps and heat exchangers

• Built-in overflow valve ensures safe operation

• Provides chemical injection via a liquid control valve that siphons chemicals or detergents to maximize cleaning efficiency

TankJet® BX Injector

How It Works

Steam enters chamber and mixes with the cold water.

The cold water instantly condenses the hot steam and creates a vacuum. The cold water absorbs the heat and velocity from the steam and a high-speed stream of hot water is produced.

The hot water will discharge at higher pressure than the inlet cold water pressure. The temperature rise can be up to 110°F (43°C) above the inlet water temperature. This liquid feeds tank cleaning machines and nozzle manifolds.

Detergent (if required) is metered in and mixed into the hot water stream.

TankJet BX Injector For liquid discharge capacities

up to 110 gpm (416 l/min)

The hot water passes through the venturi and expands. The water loses speed but gains pressure as it discharges.

Overflow valve prevents dangerous accidents from occurring due to burst pipes or any blockage downstream.




Typical Application

TankJet BX Injector Use in Rail Car Cleaning

TankJet BX Injector feeds hot liquid into a TankJet 360 Tank Cleaning Machine.

TankJet 360 provides thorough, quick and efficient cleaning of the rail car. The use of hot water shortens cleaning time.

Performance Data

TankJet Injector No.

Steam Capacity

lbs/hr (kg/hr)

Inlet Steam Pressure psi (bar)

50 (3.4)

75 (5.2)

100 (6.9)

125 (8.6)

150 (10.3)

Maximum Liquid Discharge Pressure psi (bar)

120 (8.3)

170 (11.7)

220 (15.2)

280 (19.3)

340 (23.4)

Liquid Discharge Capacity gpm (l/min)

TJBX-301000 to 3000 (454 to 1361)

30 (114) 35 (132) 45 (170) 50 (189) 55 (208)

TJBX-501700 to 4500 (771 to 2041)

50 (189) 60 (227) 70 (265) 75 (284) 80 (303)

TJBX-702500 to 6000

(1134 to 2722)70 (265) 80 (303) 90 (341) 100 (379) 110 (416)




Dimensions

27.3” (693 mm)

4.41” (112 mm)

11” (279 mm)


TankJet BX Injector

TJBX – 30 – __*I I I

Injector No.

Model Type

Conn.


Specifications

Inlet steam pressure range:

50 to 150 psi (3.4 to 10.3 bar)

Steam capacity range: 1000 to 6000 lbs/hr (454 to 2722 kgs/hr)

Max. liquid discharge pressure range:

120 to 340 psi (8.3 to 23.4 bar)

Liquid discharge flow rate range:

30 to 110 gpm (114 to 416 l/min)

Max. liquid discharge temperature:

180°F (82°C)

Inlet conn.:Steam: 1-1/2" NPT or BSPT (M); Water: 1-1/2" NPT or BSPT (M); Detergent: 1/2" NPT or BSPT (M)

Outlet conn.:Discharge: 1-1/2" NPT or BSPT (M); Overflow: 2" NPT (F) or BSPT (M)

Weight: 48 lbs (22 kg)

Materials:Brass with 303SS detergent tube and EP O-ring



Catalog 15 - TankJet BX Injector0411


Tank Cleaning Nozzles Commonly Used with TankJet BX Injector

TankJet Tank Cleaning NozzlesNozzle

Type/Size in (mm)

Compatible Injector

Type

Injector Steam Inlet Pressure Range

psi (bar)

Tank Cleaning Nozzles Operating Pressure

Range psi (bar)

Tank Cleaning Nozzles Flow Rate Range

gpm (l/min)

TJ-16

C, D, GTJBX30 100 to 150 (6.9 to 10.3) 60 to 100 (4.1 to 6.9) 45 to 55 (170 to 208)

TJBX50 50 to 150 (3.4 to 10.3) 80 to 200 (5.5 to 13.8) 50 to 80 (189 to 303)

HTJBX30 75 to 150 (5.2 to 10.3) 50 to 110 (3.4 to 7.6) 35 to 55 (132 to 208)

TJBX50 50 to 125 (3.4 to 8.6) 95 to 200 (6.6 to 13.8) 50 to 75 (3.4 to 5.2)

TJ-65

1/4 (6.4)TJBX30 50 to 150 (3.4 to 10.3) 50 to 120 (3.4 to 8.3) 30 to 55 (114 to 208)






TJ-65-HT

1/4 (6.4) TJBX70 50 to 150 (3.4 to 10.3) 58 to 135 (4.0 to 9.3) 70 to 110 (265 to 416)



TJ-80-2





TJ-80-35/16 (7.9)




TJ-360-2



9/32 (7.1)




5/16 (7.9)









TJ-360-3

1/4 (6.4)












TankJeT® B InJecTor

Efficient Transformation of Steam and Cold Water into High-Pressure, High-Temperature Liquid Feeds


• Ideal feed device for tank cleaning machines and custom-designed nozzle manifolds

• Non-intrusive: suitable for use with cold, low-pressure city water and existing plant steam

• Produces a high-pressure, high-temperature liquid discharge stream

• Increased pressure provides higher impact for cleaning tough residues

• Higher temperature speeds cleaning by quickly breaking down soil

• Eliminates the need for expensive pumps and heat exchangers

• Built-in overflow valve ensures safe operation

• Provides chemical injection via a liquid control valve that siphons chemicals or detergents to maximize cleaning efficiency

TankJet® B Injector

How It Works

Steam enters chamber and mixes with the cold water.

The cold water instantly condenses the hot steam and creates a vacuum. The cold water absorbs the heat and velocity from the steam and a high-speed stream of hot water is produced.

The hot water will discharge at higher pressure than the inlet cold water pressure. The temperature rise can be up to 110°F (43°C) above the inlet water temperature. This liquid feeds tank cleaning machines and nozzle manifolds.

Detergent (if required) is metered in and mixed into the hot water stream.

TankJet B Injector For liquid discharge capacities

up to 34 gpm (129 l/min)

The hot water passes through the venturi and expands. The water loses speed but gains pressure as it discharges.

Overflow valve prevents dangerous accidents from occurring due to burst pipes or any blockage downstream.




Typical Application

TankJet B Injector Use in Tote Cleaning

Performance Data

TankJet Injector No.

Steam Capacity

lbs/hr (kg/hr)

Inlet Steam Pressure psi (bar)

50 (3.4)

75 (5.2)

100 (6.9)

125 (8.6)

150 (10.3)

Maximum Liquid Discharge Pressure psi (bar)

120 (8.3)

170 (11.7)

220 (15.2)

280 (19.3)

340 (23.4)

Liquid Discharge Capacity gpm (l/min)

TJB-4160 to 400 (73 to 182)

4 (15.1) 4.5 (17.0) 5.5 (21) 6 (23) 6.5 (25)

TJB-7280 to 700

(127 to 318)7 (26) 8 (30) 9 (34) 10.5 (40) 12 (45)

TJB-9360 to 900

(163 to 408)9 (34) 12 (45) 13 (49) 15 (57) 16.5 (62)

TJB-15700 to 1500 (318 to 680)

15 (57) 20 (76) 24 (91) 27 (102) 29 (110)

TJB-20800 to 2000 (363 to 907)

20 (76) 25 (95) 29 (110) 32 (121) 34 (129)

TankJet B Injector feeds hot liquid into a TankJet 75-1861 Tank Cleaning Machine.

TankJet 75-1861 provides thorough, quick and efficient cleaning of the tote. The use of hot water shortens cleaning time.




Dimensions

21.96” Max.(558 mm)

3.48”(88 mm)

9.24”(235 mm)


TankJet B Injector

TJB – 4 – __*I I I

Injector No.

Model Type

Conn.


Specifications

Inlet steam pressure range:

50 to 150 psi (3.4 to 10.3 bar)

Steam capacity range: 160 to 2000 lbs/hr (73 to 907 kgs/hr)

Max. liquid discharge pressure range:

120 to 340 psi (8.3 to 23.4 bar)

Liquid discharge flow rate range:

4 to 34 gpm (15 to 128.7 l/min)

Max. liquid discharge temperature:

180°F (82°C)

Inlet conn.:Steam: 1-1/4" NPT or BSPT (M); Water: 1-1/4" NPT or BSPT (M); Detergent: 1/2" NPT or BSPT (M)

Outlet conn.:Discharge: 3/4" NPT or BSPT (F); Overflow: 1" NPT (F) or BSPT (M)

Weight: 24 lbs (11 kg)

Materials:Brass with 303SS detergent tube and EP O-ring



Catalog 15 - TankJet B Injector0411


Tank Cleaning Nozzles Commonly Used with TankJet B Injector

TankJet Tank Cleaning NozzlesNozzle

Type/Size Compatible

Injector Type

Injector Steam Inlet Pressure Range

psi (bar)

Tank Cleaning Nozzles Operating Pressure

Range psi (bar)

Tank Cleaning Nozzles Flow Rate Range

gpm (l/min)

TJ-14

cTJB-15 60 to 150 (4.1 to 10.3) 50 to 150 (3.4 to 10.3) 17 to 29 (64 to 110)

TJB-20 50 to 150 (3.4 to 10.3) 70 to 200 (4.8 to 13.8) 20 to 34 (76 to 129)

G, HTJB-15 55 to 150 (3.8 to 10.3) 50 to 170 (3.4 to 11.7) 16 to 29 (61 to 110)


DTJB-15 50 to 140 (3.4 to 9.7) 60 to 200 (4.1 to 13.8) 15 to 28 (57 to 106)


TJ-19

cTJB-15 60 to 150 (4.1 to 10.3) 50 to 190 (3.4 to 13.1) 17 to 29 (64 to 110)


DTJB-15 50 to 150 (3.4 to 10.3) 50 to 200 (3.4 to 13.8) 15 to 29 (57 to 110)


G

TJB-9 75 to 150 (5.2 to 10.3) 50 to 90 (3.4 to 6.2) 12 to 16.5 (45 to 62)



H

TJB-9 60 to 150 (4.1 to 10.3) 50 to 100 (3.4 to 6.9) 10 to 16.5 (38 to 62)



TJ-75-1858

234TJB-15 75 to 125 (5.2 to 8.6) 150 to 300 (10.3 to 20.7) 20 to 27 (76 to 102)


234LPTJB-9 100 to 150 (6.9 to 10.3) 50 to 120 (3.4 to 8.3) 13 to 16.5 (49 to 62)


172 TJB-15 50 to 90 (3.4 to 6.2) 150 to 300 (10.3 to 20.7) 15 to 22 (57 to 83)

172LP TJB-9 60 to 125 (4.1 to 8.6) 70 to 150 (4.8 to 10.3) 10 to 15 (38 to 57)

TJ-75-1861

172TJB-15 110 to 150 (7.6 to 10.3) 150 to 210 (10.3 to 14.5) 25 to 29 (95 to 110)


172LPTJB-9 75 to 150 (5.2 to 10.3) 50 to 90 (3.4 to 6.2) 12 to 16.5 (45 to 62)


125 TJB-15 55 to 95 (3.8 to 6.6) 150 to 300 (10.3 to 20.7) 16 to 23 (61 to 87)

125LPTJB-7 100 to 150 (6.9 to 10.3) 50 to 100 (3.4 to 6.9) 9 to 12 (34 to 45)




TAnkJET ACCESSORIES

Simplify installation, optimize Performance

ADJUSTABlE FlANGES FOR TANKJET AA190 AND AA090 TANK ClEANERS


• Maximize cleaning effectiveness by positioning nozzle turret to clean around obstructions or targeting skim lines or other areas requiring extra impact

– Standard adjustable flanges allow positioning the nozzles at various depths along the length of the extension

– Adjustable ball swivel flanges allow adjustment of the spray head by as much as 60°

• Choice of connections: tri-clamp fitting, three-prong flange, 150# flange connection

ADAPTERS AND MOUNTING KITS


• Tapered manway adapter enables drop-in-place installation of the TankJet 360 with tanker truck openings between 17” and 21” (432 and 533 mm); 304 stainless steel construction

• Chemically-resistant adapter enables any air or electric TankJet AA090 or AA190 tank cleaner to be used in tanks with inlet sizes ranging from 2” to 4”

• Simplify mounting the standard TankJet AA190 4” three-prong flange to a 4” 150# flange. Kit includes a 4” 316 stainless steel raised face flange, stainless steel lock washers, bolts and PTFE gasket

TankJet® accessories

Three-prong Adjustable Flange Can be used with TankJet AA090 and AA190 tank cleaners

Ball Swivel Adjustable Flange Choose 4” or 6” 150# adjustable ball swivel flanges. 4” sanitary version also available

Adjustable FlangeChoice of 2-1/2”, 3”, 4” or 6” tri-clamp fittings

Adapter for TankJet AA090 and AA190 Tank Cleaners Has a 6.25” OD, Celcon® construction with 304 stainless steel screws

Mounting KitIncludes everything you need – flange, lock washers, bolts and gasket

Manway AdapterIncludes vent for vapor release, shield to prevent liquid from spraying into vent and removable plug that allows cone to be filled with liquid if additional weight is desired

Raised Face Adjustable Flange Choice of 2”, 3” or 4” 150#

raised face flanges

Celcon® is a registered trademark of Celanese Corporation.



TAnkJET® ACCESSORIES

Catalog 15 - Accessories


Model no. Length Outside Diameter Weight

Adjustable Flange for Tanks with Tri-Clamp Fitting

39205-2-1/2 4-3/4" (121 mm) 3" (76 mm) 2 lbs. (.9 kg)

39205-3 4-3/4” (121 mm) 3.6” (91 mm) 2.1 lbs. (.95 kg)

39205-4 4-3/4” (121 mm) 4.7” (119 mm) 2.5 lbs. (1.1 kg)

39205-6 4-3/4” (121 mm) 6.6” (168 mm) 5.3 lbs. (2.4 kg)

Adjustable Three-Prong Flange

22250 4-1/16" (103 mm) 5" (127 mm) 2.8 lbs. (1.3 kg)

Adjustable Flange for Tanks with 150# Connections

46395-2 4-13/16" (122 mm) 6" (152 mm) 12 lbs. (5.4 kg)

46395-3 4-15/16" (125 mm) 7.5" (191 mm) 12.9 lbs. (5.9 kg)

46395-4 5" (127 mm) 9" (229 mm) 17.7 lbs. (8.0 kg)

Ball Swivel Adjustable Flange

43047-4 6-3/4" (172 mm) 9" (229 mm) 20 lbs. (9.1 kg)

43047-6 6-3/4" (172 mm) 11" (279 mm) 30 lbs. (13.6 kg)

Tapered Manway with 1-1/2" NPT (M) Both Ends

46573 46" (1,168 mm) 22" (559 mm) 75 lbs. (34 kg)

Adapter

45260 3-3/16" 6.25" (159 mm) 1 lb. (.45 kg)

Mounting Kit

39204 15/16" (24 mm) 9" (229 mm) 15 lbs. (6.8 kg)

adapter

45260 – ceI I

Model No.

Material Code

Manway adapter

46573 – SSI I

Model No.

Material Code


Mounting kit

39204 – 4 – 316SSI I I

Model No.

Flange Size

Material Code

adjustable Flange

39205 – 3 – 316SSI I I

Model No.

FlangeSize

MaterialCode

three-prong adjustable Flange

22250 – 316SSI I

Model No.

Material Code

Ball Swivel adjustable Flange

43047 – 4 – 316SSI I I

ModelNo.

FlangeSize

MaterialCode

raised Face adjustable Flange

46395 – 4 – 316SSI I I

ModelNo.

FlangeSize

MaterialCode

0211

Let Us Help Optimize Your

Tank Cleaning OperationsTell us about:

• The size of your tank

• The residue that needs to be cleaned

• The cleaning liquid used

And we’ll tell you which of our many automated tank cleaning products is right for the job. With a newly expanded product line, we have solutions for:

• Gentle rinsing to high-impact cleaning to remove stubborn residues

• Containers with diameters as small as 2’ and tanks as large as 100’

• Portable or clean-in-place operation

Plus, we offer:

• Unmatched service – dedicated, local sales engineers ready to help optimize your operations

• Free on-site evaluations, trial programs on some products, lease programs and more

Call 1.800.95.SPRAY or visit www.tankjet.com for more information.

New TankJet® 360 is available in low-flow and flow-through versions. Choose from two- or three-nozzle designs.

North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 USA

Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000 Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842

www.spray.com

Bulletin No. 688 Printed in the U.S.A. ©Spraying Systems Co. 2011

SprayNozzles

SprayControl

SprayAnalysis

SprayFabrication

Date post:	27-Jan-2017
Category:	Documents
Upload:	dodan
View:	242 times
Download:	10 times

TankJet Tank Cleaning Products, Catalog 15

Documents