12
TC10 Industrial Thermocouple Assembly Electrical Temperature Measurement North American
TC10 Industrial Thermocouple Assembly
ElectricalTemperatureMeasurement
North American
Thermocouples
Features: � The sensor can be mounted into a thermowell
or directly into a process with the use of a fixed, spring loaded or compression process fitting.
� The assembly can be supplied with or without a transmitter. Transmitters convert the millivolt input from the thermocouple to a linear analogue or digital output (commonly 4-20 mA). This signal reduces potential inaccuracies in the circuit and negates the requirement for thermocouple extension wire.
� The assembly has electrical approvals for explosion proof hazardous locations, intrinsic safety, ingress protection and general purpose areas.
� Electrical authorities that have registered these approvals include CSA, FM, ATEX/IEC, and NAMUR. The approvals can be with or without an attached thermowell. A specially designed and patented integral flame path fitting makes it possible when supplied without a thermowell.
� The thermocouple sensors available for this assembly are provided with a variety of sheath materials including austenitic 300 series and ferritic 400 series stainless steels, corrosion resistant and high temperature oxidation resistant alloys.
� Thermocouple diameters range from 0.125 inch to 0.250 inch and 2 mm to 8 mm. Standard diameters are 0.125 inch & 0.250 inch also 3 mm & 6 mm.
� The thermocouple sensor can be spring-loaded ensuring a positive contact to the base of a thermowell bore.
� Thermocouple temperature ranges are dependent on the sheath & conductor diameter, element calibration, and sheath material.
� A variety of neck extensions are possible. They provide a fixture from the enclosure (connection head) to the process or thermowell. The standard neck extensions are the nipple-union-nipple or the male threaded neck tube. These extensions allow for directional rotation of the head for field wiring as well as a positive quick disconnection of the assembly from the process or thermowell.
TC10 - Industrial Thermocouple Assembly
Sensor Element:
� Type K (NiCr-Ni),
� Type J (Fe-CuNi),
� Type E (NiCr-CuNi),
� Type N (NiCrSi-NiSi),
� Type T (Cu-CuNi)
Temperature range:-200 °C to +1260 °C (depending upon element)
Number of sensors: � 2-wire single circuit
� 4-wire dual circuit
Classification tolerance:
� Class 2 and class 1 per DIN EN 60584
� ISA standard and special to ANSI MC96.1-1982
Measuring point: Ungrounded or grounded
Electrical approvals:CSA, FM, ATEX/IEC, NAMUR
Options:
� Lengths and diameters standard or customer specific
� Transmitter mounted directly within connection head or on measuring insert DIN plate
� Calibration - single point and multiple points
� Material traceability of the thermocouple alloys, metal sheath and mineral insulation
� Selectable accuracy tolerance
� Exchangeable measuring insert
� Special designs and materials
� Explosion protection: CSA, FM, ATEX (EEx-d)
� Intrinsically safe version: ATEX (EEx-i)
� Non-sparking version: ATEX (EEx-n)
� Thermocouple transmitter matching
FMAPPROVED
N
A
BSS-H8000W1000F1000S
KN4-AKN4-P
BSZ-Hw/DIGITALINDICATOR
KNPL-0
JVAJSBSBVABSZ
BSZ-KBSSBSZ-H
BSZ-HK
Connection HeadsImperial Grid 1" x 1"
Part of Your Business
TC10 Industrial Thermocouple Assembly
TC10 series thermocouples are industrial assemblies supplied
with or without a temperature transmitter. An extensive range
of elements, connection heads, insertion lengths, neck lengths,
and process connections can be individually selected for the
appropriate application. Replacement sensors can also be
configured for this model.
Thermocouples in this series can be inserted directly into a
process or combined with a variety of thermowell designs.
Applications:TC10 series assemblies are suitable for most industrial and commercial applications including:
� Chemical and petrochemical industries
� Energy and power plant technology
� Furnaces, kilns, ovens and boilers
� Incinerators
� Machinery, plant and tank measurement
� Oil and gas industries
� Offshore exploration and drilling
� Pipeline control
� Power and utilities
� Pulp and paper
� Water and wastewater treatment
Page 1 WIKA Data Sheet TE TC.102 - 04/2011
Thermocouples
CalgaryTel: (403) 237.5960
Fort McMurray Tel: (780) 791.9995
Grande Prairie Tel: (780) 357.0386
SaskatoonTel: (306) 664.1105
OakvilleTel: (905) 337.1611
SarniaTel: (519) 344.1339
MontréalTel: (514) 332.0330
Quebec CityTel: (418) 952.7779
Edmonton Tel: (780) 463.7035
Burnaby Tel: (604) 299.3855
Features:The sensor is designed to be �mounted into a thermowell.
The assembly has electrical approvals for �explosion proof hazardous locations, ingress protection and general purpose areas.
Electrical authorities that have registered these �approvals include CSA, FM and ATEX. The approvals can be with or without an attached thermowell. Our patented integral flame path is required when supplied without a thermowell.
The thermocouple sensor is spring-loaded ensuring �a positive contact to the base of a thermowell bore.
Connection HeadsImperial Grid 1" x 1"
7/8000W1/4000F1/4000S
KN4-AKN4-P
TC10-2 Industrial Thermocouple Assembly
Spring Loaded (Head Internal)TC10-2 thermocouples are industrial assemblies supplied
with or without a temperature transmitter. An extensive
range of thermocouple calibrations, connection heads,
insertion lengths and neck lengths can be individually selected
for the appropriate application.
Thermocouples in this series can be inserted directly into
a variety of thermowell configurations. Spring loading is
acheived within the termination head utilizing a self-gripping
spring or spring loaded DIN plate.
Replacement sensors can also be configured for this model.
CRASTIN TERMINAL BLOCK
SELF GRIPPING SPRING
7/8000W TERMINATION HEAD
NIPPLE
N
A
N
A
T32 TRANSMITTER
SPRING LOADED PLATE
1/4000F TERMINATION HEAD
NIPPLE-UNION-NIPPLE
FLAME PATH
THERMOCOUPLE ASSEMBLY SAMPLETC10-2-0-I-D-C-1AF13-6-FG-060-A-1-1-P-00600-Z
THERMOCOUPLE ASSEMBLY SAMPLETC10-2-0-I-S-C-7AW13-1-EG-030-B-1-1-P-00600-Z
A
A
FMAPPROVED
Cre
ate
your
pro
duc
t p
art
num
ber
by
sele
ctin
g th
e ap
pro
pri
ate
asse
mb
ly it
ems
fro
m e
ach
of t
he c
ateg
ori
es b
elo
w.
Ent
er t
he it
em c
od
e in
to t
he a
pp
licab
le b
ox t
o g
ener
ate
the
par
t nu
mb
er.
No
te:
So
me
conf
igur
atio
ns a
re u
nava
ilab
le.
Yo
ur W
IKA
sal
es r
epre
sent
ativ
e w
ill n
oti
fy y
ou
if yo
u ha
ve m
ade
an in
corr
ect
sele
ctio
n.T
C10
-2-.
..
Par
t N
umb
erTC
10-2
-X-X
-X-X
-XX
XX
X-X
-XX
-XX
X-
X-X
-X-X
-XX
XX
X-X
1A
ssem
bly
des
crip
tio
n
Cod
e
0In
dus
tria
l ass
emb
ly c
onfig
ured
1In
dus
tria
l sen
sor
conf
igur
ed(n
o te
rmin
atio
n he
ad)
2U
nit
of
mea
sure
IIm
per
ial (
inch
)
MM
etric
(mm
)
3S
pri
ng d
esig
n
SS
elf g
ripp
ing
sprin
g
DS
prin
g lo
aded
pla
te(re
qui
red
for
tran
smitt
er)
4E
lect
rica
l ap
pro
val
CC
SA
Ex-
pro
of C
lass
I D
ivis
ion
1
FFM
Ex-
pro
of C
lass
I D
ivis
ion
1
JE
Ex-
d (A
TEX
) acc
. to
dire
ctiv
e94
/9/E
C
ZW
ithou
t
5C
onn
ecti
on
head
1AF
1/40
00
F (A
lum
inum
)w
ith F
lam
e P
ath1
1SF
1/40
00
S (S
tain
less
ste
el)
with
Fla
me
Pat
h1
7AF
7/80
00
W (A
lum
inum
)w
ith F
lam
e P
ath1
1AW
1/40
00
F (A
lum
inum
)w
ithou
t Fla
me
Pat
h
1SW
1/40
00
S (S
tain
less
ste
el)
with
out
Flam
e P
ath
7AW
7/80
00
W (A
lum
inum
)w
ithou
t Fl
ame
Pat
h
KA
WK
N4
-A (A
lum
inum
)
KP
WK
N4
-P (P
oly
pro
pyl
ene)
ZZ
ZW
itho
ut
6In
stru
men
t x
Co
ndui
t en
try
111/
2 N
PT
x 1/
2 N
PT
131/
2 N
PT
x 3/
4 N
PT
121/
2 N
PT
x M
20x1
.5
313/
4 N
PT
x 1/
2 N
PT
(red
ucer
)
333/
4 N
PT
x 3/
4 N
PT
323/
4 N
PT
x M
20x1
.5
ZZ
With
out
7T
erm
inal
blo
ck /
Tra
nsm
itte
r
1C
rast
in te
rmin
al b
lock
2C
eram
ic te
rmin
al b
lock
3T1
2, D
igita
l tra
nsm
itter
, uni
vers
ally
p
roga
mm
able
6T
32, D
igita
l tra
nsm
itter
, HA
RT®
, un
iver
sally
pro
gram
mab
le
9T
53, F
ield
bus
tran
smitt
er,
FOU
ND
ATI
ON
Fie
ldb
us,
PR
OFI
BU
S®
PA
BT
91.1
0, A
nalo
gue
tran
smitt
er, f
ixed
m
easu
ring
rang
e
YW
ithou
t
8N
eck
exte
nsio
n
FGN
ipp
le-U
nio
n-N
ipp
le -
Gal
vani
zed
stee
l
EG
Nip
ple
- G
alva
nize
d st
eel
UG
Nip
ple
-Uni
on (p
rote
ctio
n tu
be
only
) -
Gal
vani
zed
stee
l
FSN
ipp
le-U
nion
-Nip
ple
- S
tain
less
st
eel
ES
Nip
ple
- S
tain
less
ste
el
US
Nip
ple
-Uni
on (p
rote
ctio
n tu
be
only
) -
Sta
inle
ss s
teel
BS
Nip
ple
-Uni
on-O
il S
eal B
ushi
ng -
S
tain
less
ste
el
ZZ
With
out
9N
-Dim
ensi
on
(N) -
Nec
k E
xten
sio
n Le
ngth
***
N-D
imen
sion
in u
nits
(e.g
. 6.0
” =
060,
150
mm
= 1
50)
Up
to 1
2.0”
(300
mm
)U
se In
crem
ents
of 1
.0”
(25
mm
)
ZZ
ZW
ithou
t
10T
herm
oco
uple
sen
sor
ATy
pe
K (N
iCr-
NiA
l) /
0...+
1260
°C
BTy
pe
K (N
iCr-
NiA
l) /
0...+
1260
°C
Sp
ecia
l Lim
its o
f Err
or2
CTy
pe
J (F
e-C
uNi)
/ 0.
..+76
0 °C
DTy
pe
J (F
e-C
uNi)
/ 0.
..+76
0 °C
Sp
ecia
l Lim
its o
f Err
or2
ETy
pe
N (N
iCrS
i-N
iSi)
/ 0.
..+12
60 °
C
FTy
pe
N (N
iCrS
i-N
iSi)
/ 0.
..+12
60 °
CS
pec
ial L
imits
of E
rror
2
GTy
pe
E (N
iCr-
CuN
i) /
0...+
870
°C
HTy
pe
E (N
iCr-
CuN
i) /
0...+
870
°CS
pec
ial L
imits
of E
rror
2
JTy
pe
T (C
u-C
uNi)
/ -2
00...
+37
0 °C
KTy
pe
T (C
u-C
uNi)
/ -2
00...
+37
0 °C
Sp
ecia
l Lim
its o
f Err
or2
11T
herm
oco
uple
junc
tio
n
1S
ingl
e U
ngro
und
ed
2S
ingl
e G
roun
ded
3D
ual U
ngro
und
ed
4D
ual G
roun
ded
12S
enso
r d
iam
eter
11/
4 in
ch /
0.2
50 in
ch (6
.35
mm
)
83/
8 in
ch /
0.3
75 in
ch (9
.53
mm
)
D6.
0 m
m (0
.235
Inch
)
13S
heat
h m
ater
ial
PS
tain
less
ste
el 3
16 /
316
L (1
.440
1 /
1.44
35)
OS
tain
less
ste
el 3
10 (1
.484
1)
JIn
cone
l® 6
00 (2
.481
6)
I H
aste
lloy®
X (2
.466
5)
T S
tain
less
ste
el 4
46 (1
.476
2)
H
Has
tello
y® C
276
(2.4
819)
14A
-Dim
ensi
on
(A) -
Sen
sor
Inse
rtio
n Le
ngth
****
*P
leas
e sp
ecify
(e.g
. 84
mm
= 0
0084
) (e
.g. 9
.5 in
ch =
009
50)
15C
erti
ficat
es
1Y
es3
ZW
ithou
t
51
1312
1110
98
76
43
215
14
No
tes:
1 Fla
me
pat
h re
qui
red
fo
r E
xplo
sio
n P
roo
fas
sem
blie
s no
t as
sem
ble
d t
o W
IKA
the
rmo
wel
l.2A
s p
er A
NS
I MC
96.
1-19
82.
3S
ee D
ata
She
et C
ER
T.31
fo
r ce
rtifi
cate
op
tio
ns
and
det
ails
.
Rep
lace
men
t S
enso
r ‘A
’-D
imen
sio
n
Sel
f grip
pin
g sp
ring
with
out F
lam
e P
ath
‘A’+
’N’+
1 7/
8”
Sel
f grip
pin
g sp
ring
with
Fla
me
Pat
h‘A
’+’N
’+2
3/8”
Sp
ring
load
ed p
late
with
out F
lam
e P
ath
‘A’+
’N’+
1 7/
8”
Sp
ring
load
ed p
late
with
Fla
me
Pat
h‘A
’+’N
’+1
7/8”
Page 1 WIKA Data Sheet TE TC.103 - 04/2011
Thermocouples
CalgaryTel: (403) 237.5960
Fort McMurray Tel: (780) 791.9995
Grande Prairie Tel: (780) 357.0386
SaskatoonTel: (306) 664.1105
OakvilleTel: (905) 337.1611
SarniaTel: (519) 344.1339
MontréalTel: (514) 332.0330
Quebec CityTel: (418) 952.7779
Edmonton Tel: (780) 463.7035
Burnaby Tel: (604) 299.3855
Features:The sensor is designed to be �mounted directly into process.
The assembly has electrical approvals for �explosion proof hazardous locations, ingress protection and general purpose areas.
Electrical authorities that have registered these �approvals include CSA, FM and ATEX.
Optional compression fitting allows insertion �depth to be adjusted during installation.
Connection HeadsImperial Grid 1" x 1"
7/8000W1/4000F1/4000S
KN4-AKN4-P
TC10-3 Industrial Thermocouple Assembly
Fixed (Direct Mount Into Process)TC10-3 thermocouples are industrial assemblies supplied with or without a
temperature transmitter. An extensive range of thermocouple calibrations,
connection heads, insertion lengths and neck lengths can be individually
selected for the appropriate application.
Thermocouples in this series are designed to be installed directly into
the process. The welded fitting or optional compression fitting make this
assembly ideal for use without a thermowell.
Replacement sensors can also be configured for this model.
N = 1”
A
T32 TRANSMITTER
1000F TERMINATION HEAD
DOUBLE THREADED HEX BUSHING
A
CRASTIN TERMINAL BLOCK
8000W TERMINATION HEAD
SINGLE THREADED HEX BUSHINGN = 3”
AAdjust asrequired
OPTIONAL COMPRESSION FITTING
THERMOCOUPLE ASSEMBLY SAMPLETC10-3-0-I-C-1AW13-6-DS-010-B-1-1-P-00600-Z
THERMOCOUPLE ASSEMBLY SAMPLETC10-3-0-I-C-7AW13-1-SC-030-B-1-1-P-00600-Z
FMAPPROVED
Cre
ate
your
pro
duc
t p
art
num
ber
by
sele
ctin
g th
e ap
pro
pri
ate
asse
mb
ly it
ems
fro
m e
ach
of t
he c
ateg
ori
es b
elo
w.
Ent
er t
he it
em c
od
e in
to t
he a
pp
licab
le b
ox t
o g
ener
ate
the
par
t nu
mb
er.
No
te:
So
me
conf
igur
atio
ns a
re u
nava
ilab
le.
Yo
ur W
IKA
sal
es r
epre
sent
ativ
e w
ill n
oti
fy y
ou
if yo
u ha
ve m
ade
an in
corr
ect
sele
ctio
n.T
C10
-3-.
..
Par
t N
umb
erTC
10-3
-X-X
-X-X
XX
XX
-X-X
X-X
XX
-X-
X-X
-X-X
XX
XX
-X
1A
ssem
bly
des
crip
tio
n
Cod
e
0In
dus
tria
l ass
emb
ly c
onfig
ured
1In
dus
tria
l sen
sor
conf
igur
ed(n
o te
rmin
atio
n he
ad)
2U
nit
of
mea
sure
IIm
per
ial (
inch
)
MM
etric
(mm
)
3E
lect
rica
l ap
pro
val
CC
SA
Ex-
pro
of C
lass
I D
ivis
ion
1
FFM
Ex-
pro
of C
lass
I D
ivis
ion
1
JE
Ex-
d (A
TEX
) acc
. to
dire
ctiv
e94
/9/E
C
ZW
ithou
t
4C
onn
ecti
on
head
1AW
1/40
00
F (A
lum
inum
)
1SW
1/40
00
S (S
tain
less
ste
el)
7AW
7/80
00
W (A
lum
inum
)
KA
WK
N4
-A (A
lum
inum
)
KP
WK
N4
-P (P
oly
pro
pyl
ene)
ZZ
ZW
itho
ut
5In
stru
men
t x
Co
ndui
t en
try
111/
2 N
PT
x 1/
2 N
PT
131/
2 N
PT
x 3/
4 N
PT
121/
2 N
PT
x M
20x1
.5
313/
4 N
PT
x 1/
2 N
PT
(red
ucer
)
333/
4 N
PT
x 3/
4 N
PT
323/
4 N
PT
x M
20x1
.5
ZZ
With
out
6T
erm
inal
blo
ck /
Tra
nsm
itte
r
1C
rast
in te
rmin
al b
lock
2C
eram
ic te
rmin
al b
lock
3T1
2, D
igita
l tra
nsm
itter
, uni
vers
ally
p
roga
mm
able
6T
32, D
igita
l tra
nsm
itter
, HA
RT®
, un
iver
sally
pro
gram
mab
le
9T
53, F
ield
bus
tran
smitt
er,
FOU
ND
ATI
ON
Fie
ldb
us,
PR
OFI
BU
S®
PA
BT
91.1
0, A
nalo
gue
tran
smitt
er, f
ixed
m
easu
ring
rang
e
YW
ithou
t
7N
eck
exte
nsio
n
DS
Fix
ed d
oub
le t
hrea
ded
hex
b
ushi
ng (3
16S
S)
SS
Fix
ed s
ing
le t
hrea
ded
hex
bus
hing
(3
16S
S)
SC
Fix
ed s
ing
le t
hrea
ded
hex
bus
hing
w
ith 1
/2 N
PT
com
pre
ssio
n fit
ting
(SS
bo
dy
and
ferr
ule)
DU
Nip
ple
-Uni
on-
Fix
ed d
oub
le
thre
aded
hex
bus
hing
(316
SS
)
8N
-Dim
ensi
on
(N) -
Nec
k E
xten
sio
n Le
ngth
005
0.5
inch
(13
mm
) - S
ingl
e th
read
ed
010
1.0
inch
(25
mm
) - D
oubl
e th
read
ed
030
3.0
inch
(76
mm
) - S
ingl
e th
read
ed
with
com
pres
sion
fi tti
ng
050
5.0
inch
(127
mm
) - N
ippl
e-U
nion
-Fi
xed
Dou
ble
thre
aded
hex
bus
hing
9T
herm
oco
uple
sen
sor
ATy
pe
K (N
iCr-
NiA
l) /
0...+
1260
°C
BTy
pe
K (N
iCr-
NiA
l) /
0...+
1260
°C
Sp
ecia
l Lim
its o
f Err
or1
CTy
pe
J (F
e-C
uNi)
/ 0.
..+76
0 °C
DTy
pe
J (F
e-C
uNi)
/ 0.
..+76
0 °C
Sp
ecia
l Lim
its o
f Err
or1
ETy
pe
N (N
iCrS
i-N
iSi)
/ 0.
..+12
60 °
C
FTy
pe
N (N
iCrS
i-N
iSi)
/ 0.
..+12
60 °
CS
pec
ial L
imits
of E
rror
1
GTy
pe
E (N
iCr-
CuN
i) /
0...+
870
°C
HTy
pe
E (N
iCr-
CuN
i) /
0...+
870
°CS
pec
ial L
imits
of E
rror
1
JTy
pe
T (C
u-C
uNi)
/ -2
00...
+37
0 °C
KTy
pe
T (C
u-C
uNi)
/ -2
00...
+37
0 °C
Sp
ecia
l Lim
its o
f Err
or1
10T
herm
oco
uple
junc
tio
n
1S
ingl
e U
ngro
und
ed
2S
ingl
e G
roun
ded
3D
ual U
ngro
und
ed
4D
ual G
roun
ded
11S
enso
r d
iam
eter
11/
4 in
ch /
0.2
50 in
ch (6
.35
mm
)
21/
8 in
ch /
0.1
25 in
ch (3
.17
mm
)
43/
16 in
ch /
0.1
88 in
ch (4
.75
mm
)
53/
8 in
ch /
0.3
75 in
ch (9
.53
mm
)
D6.
0 m
m (0
.235
Inch
)
12S
heat
h m
ater
ial
PS
tain
less
ste
el 3
16 /
316
L (1
.440
1 /
1.44
35)
OS
tain
less
ste
el 3
10 (1
.484
1)
JIn
cone
l® 6
00 (2
.481
6)
I H
aste
lloy®
X (2
.466
5)
T S
tain
less
ste
el 4
46 (1
.476
2)
H
Has
tello
y® C
276
(2.4
819)
13A
-Dim
ensi
on
(A) -
Sen
sor
Inse
rtio
n Le
ngth
****
*P
leas
e sp
ecify
(e.g
. 84
mm
= 0
0084
) (e
.g. 9
.5 in
ch =
009
50)
14C
erti
ficat
es
1Y
es2
ZW
ithou
t
41
1211
109
87
65
32
1413
No
tes:
1 As
per
AN
SI M
C9
6.1-
1982
.2S
ee D
ata
She
et C
ER
T.31
fo
r ce
rtifi
cate
op
tio
ns
and
det
ails
.
Page 1 WIKA Data Sheet TE TC.104 - 04/2011
Thermocouples
CalgaryTel: (403) 237.5960
Fort McMurray Tel: (780) 791.9995
Grande Prairie Tel: (780) 357.0386
SaskatoonTel: (306) 664.1105
OakvilleTel: (905) 337.1611
SarniaTel: (519) 344.1339
MontréalTel: (514) 332.0330
Quebec CityTel: (418) 952.7779
Edmonton Tel: (780) 463.7035
Burnaby Tel: (604) 299.3855
Features:The sensor is designed to be mounted �into a thermowell or directly into the process (oil seal bushing).
The assembly has electrical approvals for �explosion proof hazardous locations, ingress protection and general purpose areas.
Electrical authorities that have registered �these approvals include CSA, FM and ATEX. The approvals must be with an attached WIKA thermowell.
The thermocouple sensor is spring- �loaded ensuring a positive contact to the required location.
Connection HeadsImperial Grid 1" x 1"
7/8000W1/4000F1/4000S
KN4-AKN4-P
TC10-4 Industrial Thermocouple Assembly
Spring Loaded (Neck Extension External)TC10-4 thermocouples are industrial assemblies supplied with or without a
temperature transmitter. An extensive range of thermocouple calibrations,
connection heads, insertion lengths and neck lengths can be individually
selected for the appropriate application.
Spring loading is acheived utilizing a spring loaded bushing as or as part
of the neck extension. The spring loaded bushing can be combined with a
nipple and union for ease of installation. An oil seal bushing with o-ring is also
available for direct mount into the process.
Replacement sensors can also be configured for this model.
CRASTIN TERMINAL BLOCK
7/8000W TERMINATION HEAD
T32 TRANSMITTER
1/4000F TERMINATION HEAD
SPRING LOADED BUSHING
THERMOCOUPLE ASSEMBLY SAMPLETC10-4-0-I-Z-1AW-13-6-SL-010-B-1-1-P-00600-Z
THERMOCOUPLE ASSEMBLY SAMPLETC10-4-0-I-Z-7AW-13-1-OU-030-B-1-1-P-00600-Z
N
A
N
A
NIPPLE-UNION-SPRING LOADED BUSHINGWITH OIL SEAL O-RING
FMAPPROVED
Cre
ate
your
pro
duc
t p
art
num
ber
by
sele
ctin
g th
e ap
pro
pri
ate
asse
mb
ly it
ems
fro
m e
ach
of t
he c
ateg
ori
es b
elo
w.
Ent
er t
he it
em c
od
e in
to t
he a
pp
licab
le b
ox t
o g
ener
ate
the
par
t nu
mb
er.
No
te:
So
me
conf
igur
atio
ns a
re u
nava
ilab
le.
Yo
ur W
IKA
sal
es r
epre
sent
ativ
e w
ill n
oti
fy y
ou
if yo
u ha
ve m
ade
an in
corr
ect
sele
ctio
n.T
C10
-4-.
..
Par
t N
umb
erTC
10-4
-X-X
-X-X
XX
XX
-X-X
X-X
XX
-X-
X-X
-X-X
XX
XX
-X
1A
ssem
bly
des
crip
tio
n
Cod
e
0In
dus
tria
l ass
emb
ly c
onfig
ured
1In
dus
tria
l sen
sor
conf
igur
ed(n
o te
rmin
atio
n he
ad)
2U
nit
of
mea
sure
IIm
per
ial (
inch
)
MM
etric
(mm
)
3E
lect
rica
l ap
pro
val
CC
SA
Ex-
pro
of C
lass
I D
ivis
ion
1W
IKA
The
rmow
ell r
equi
red
FFM
Ex-
pro
of C
lass
I D
ivis
ion
1W
IKA
The
rmow
ell r
equi
red
JE
Ex-
d (A
TEX
) acc
. to
dire
ctiv
e 94
/9/E
CW
IKA
The
rmow
ell r
equi
red
ZW
ithou
t
4C
onn
ecti
on
head
1AW
1/40
00
F (A
lum
inum
)
1SW
1/40
00
S (S
tain
less
ste
el)
7AW
7/80
00
W (A
lum
inum
)
KA
WK
N4
-A (A
lum
inum
)
KP
WK
N4
-P (P
oly
pro
pyl
ene)
ZZ
ZW
itho
ut
5In
stru
men
t x
Co
ndui
t en
try
111/
2 N
PT
x 1/
2 N
PT
131/
2 N
PT
x 3/
4 N
PT
121/
2 N
PT
x M
20x1
.5
313/
4 N
PT
x 1/
2 N
PT
(red
ucer
)
333/
4 N
PT
x 3/
4 N
PT
323/
4 N
PT
x M
20x1
.5
ZZ
With
out
6T
erm
inal
blo
ck /
Tra
nsm
itte
r
1C
rast
in te
rmin
al b
lock
2C
eram
ic te
rmin
al b
lock
3T1
2, D
igita
l tra
nsm
itter
, uni
vers
ally
p
roga
mm
able
6T
32, D
igita
l tra
nsm
itter
, HA
RT®
, un
iver
sally
pro
gram
mab
le
9T
53, F
ield
bus
tran
smitt
er,
FOU
ND
ATI
ON
Fie
ldb
us,
PR
OFI
BU
S®
PA
BT
91.1
0, A
nalo
gue
tran
smitt
er, f
ixed
m
easu
ring
rang
e
YW
ithou
t
7N
eck
exte
nsio
n
SL
Sp
ring
load
ed b
ushi
ngw
itho
ut o
il se
al (S
S)
OS
Sp
ring
load
ed b
ushi
ngw
ith o
il se
al (S
S)
SU
Sp
ring
load
ed b
ushi
ng-U
nio
n-N
ipp
le (S
S)
OU
Nip
ple
-Uni
on-
Sp
ring
load
ed
bus
hing
with
oil
seal
(SS
)
8N
-Dim
ensi
on
(N) -
Nec
k E
xten
sio
n Le
ngth
010
1.0
inch
(25
mm
) - S
tand
ard
for
Bus
hing
s on
ly (n
o un
ion)
030
3.0
inch
(76
mm
)
040
4.0
inch
(102
mm
)
050
5.0
Inch
(127
mm
) - S
tand
ard
for
Uni
on-N
ippl
e
060
6.0
inch
(152
mm
)
080
8.0
Inch
(204
mm
)
9T
herm
oco
uple
sen
sor
ATy
pe
K (N
iCr-
NiA
l) /
0...+
1260
°C
BTy
pe
K (N
iCr-
NiA
l) /
0...+
1260
°C
Sp
ecia
l Lim
its o
f Err
or1
CTy
pe
J (F
e-C
uNi)
/ 0.
..+76
0 °C
DTy
pe
J (F
e-C
uNi)
/ 0.
..+76
0 °C
Sp
ecia
l Lim
its o
f Err
or1
ETy
pe
N (N
iCrS
i-N
iSi)
/ 0.
..+12
60 °
C
FTy
pe
N (N
iCrS
i-N
iSi)
/ 0.
..+12
60 °
CS
pec
ial L
imits
of E
rror
1
GTy
pe
E (N
iCr-
CuN
i) /
0...+
870
°C
HTy
pe
E (N
iCr-
CuN
i) /
0...+
870
°CS
pec
ial L
imits
of E
rror
1
JTy
pe
T (C
u-C
uNi)
/ -2
00...
+37
0 °C
KTy
pe
T (C
u-C
uNi)
/ -2
00...
+37
0 °C
Sp
ecia
l Lim
its o
f Err
or1
10T
herm
oco
uple
junc
tio
n
1S
ingl
e U
ngro
und
ed
2S
ingl
e G
roun
ded
3D
ual U
ngro
und
ed
4D
ual G
roun
ded
11S
enso
r d
iam
eter
11/
4 in
ch /
0.2
50 in
ch (6
.35
mm
)
83/
8 in
ch /
0.3
75 in
ch (9
.53
mm
)
D6.
0 m
m (0
.235
Inch
)
12S
heat
h m
ater
ial
PS
tain
less
ste
el 3
16 /
316
L (1
.440
1 /
1.44
35)
OS
tain
less
ste
el 3
10 (1
.484
1)
JIn
cone
l® 6
00 (2
.481
6)
I H
aste
lloy®
X (2
.466
5)
T S
tain
less
ste
el 4
46 (1
.476
2)
H
Has
tello
y® C
276
(2.4
819)
13A
-Dim
ensi
on
(A) -
Sen
sor
Inse
rtio
n Le
ngth
****
*P
leas
e sp
ecify
(e.g
. 84
mm
= 0
0084
) (e
.g. 9
.5 in
ch =
009
50)
14C
erti
ficat
es
1Y
es2
ZW
ithou
t
41
1211
109
87
65
32
1413
No
tes:
1 As
per
AN
SI M
C9
6.1-
1982
.2S
ee D
ata
She
et C
ER
T.31
fo
r ce
rtifi
cate
op
tio
ns
and
det
ails
.
Page 1 WIKA Data Sheet TE TC.109 - 04/2011
Thermocouples
CalgaryTel: (403) 237.5960
Fort McMurray Tel: (780) 791.9995
Grande Prairie Tel: (780) 357.0386
SaskatoonTel: (306) 664.1105
OakvilleTel: (905) 337.1611
SarniaTel: (519) 344.1339
MontréalTel: (514) 332.0330
Quebec CityTel: (418) 952.7779
Edmonton Tel: (780) 463.7035
Burnaby Tel: (604) 299.3855
Features:The assembly has a general purpose approval. �
Wire sizes for single thermocouples range from �20 AWG with insulator diameter of 0.187” to 8 AWG with insulator diameter of 0.465”
For dual thermocouples the range is 20 AWG. �with insulator diameter of 0.220” to 14AWG with insulator diameter of 0.312”.
A ceramic terminal block with metal screws is �provided inside the head for direct termination of the ceramic beaded thermocouple.
Connection HeadsImperial Grid 1" x 1"
1/4000F1/4000S
KN4-AKN4-P
TC10-9 Industrial Thermocouple Assembly
Ceramic Beaded SensorTC10-9 ceramic beaded insulator thermocouple assemblies are used in
extremely high temperature industrial applications.
These assemblies are primarily used in conjunction with ceramic closed
ended protection tubes. An extensive range of thermocouple calibrations,
connection heads, wire gauges, ceramic insulator diameters and insertion
lengths can be selected for this model.
The assembly provides a neck extension with a female threaded union for
installing directly to a ceramic protection tube fitting.
Replacement thermocouple sensors can be configured for this model.
THERMOCOUPLE ASSEMBLY SAMPLETC10-9-0-I-1AW-13-UG-030-A-5-04-00600-Z
THERMOCOUPLE ASSEMBLY SAMPLETC10-9-0-I-KAW-13-ZZ-ZZZ-A-5-04-00600-Z
N
A
CERAMIC TERMINAL BLOCK
1/4000F TERMINATION HEAD
NIPPLE-UNION
A
CERAMIC TERMINAL BLOCK
KN4 TERMINATION HEAD
WITHOUT NECK EXTENSION
FMAPPROVED
Cre
ate
your
pro
duc
t p
art
num
ber
by
sele
ctin
g th
e ap
pro
pri
ate
asse
mb
ly it
ems
fro
m e
ach
of t
he c
ateg
ori
es b
elo
w.
Ent
er t
he it
em c
od
e in
to t
he a
pp
licab
le b
ox t
o g
ener
ate
the
par
t nu
mb
er.
No
te:
So
me
conf
igur
atio
ns a
re u
nava
ilab
le.
Yo
ur W
IKA
sal
es r
epre
sent
ativ
e w
ill n
oti
fy y
ou
if yo
u ha
ve m
ade
an in
corr
ect
sele
ctio
n.T
C10
-9-.
..
Par
t N
umb
erTC
10-9
-X-X
-XX
XX
X-X
X-X
XX
-X-X
-X
X-X
XX
XX
-X
1A
ssem
bly
des
crip
tio
n
Cod
e
0In
dus
tria
l ass
emb
ly c
onfig
ured
1In
dus
tria
l sen
sor
conf
igur
ed(n
o te
rmin
atio
n he
ad)
2U
nit
of
mea
sure
IIm
per
ial (
inch
)
MM
etric
(mm
)
3C
onn
ecti
on
head
1AW
1/40
00
F (A
lum
inum
)
1SW
1/40
00
S (S
tain
less
ste
el)
KA
WK
N4
-A (A
lum
inum
)
KP
WK
N4
-P (P
oly
pro
pyl
ene)
ZZ
ZW
itho
ut
4In
stru
men
t x
Co
ndui
t en
try
111/
2 N
PT
x 1/
2 N
PT
131/
2 N
PT
x 3/
4 N
PT
121/
2 N
PT
x M
20x1
.5
313/
4 N
PT
x 1/
2 N
PT
(red
ucer
)
333/
4 N
PT
x 3/
4 N
PT
323/
4 N
PT
x M
20x1
.5
ZZ
With
out
5N
eck
exte
nsio
n
UG
Nip
ple
-Uni
on (p
rote
ctio
n tu
be
only
) -
Gal
vani
zed
stee
l
US
Nip
ple
-Uni
on (p
rote
ctio
n tu
be
only
) -
Sta
inle
ss s
teel
ZZ
With
out
6N
-Dim
ensi
on
(N) -
Nec
k E
xten
sio
n Le
ngth
030
3.0
inch
(76
mm
)
040
4.0
inch
(102
mm
) - N
ippl
e-U
nion
S
tand
ard
060
6.0
inch
(152
mm
)
ZZ
ZW
ithou
t
7T
herm
oco
uple
sen
sor
ATy
pe
K (N
iCr-
NiA
l) /
0...+
1260
°C
CTy
pe
J (F
e-C
uNi)
/ 0.
..+76
0 °C
ETy
pe
N (N
iCrS
i-N
iSi)
/ 0.
..+12
60 °
C
GTy
pe
E (N
iCr-
CuN
i) /
0...+
870
°C
8T
herm
oco
uple
junc
tio
n
5S
ingl
e R
eces
sed
6S
ingl
e E
xpos
ed
7D
ual R
eces
sed
8D
ual E
xpos
ed
9In
sula
tor
Dia
met
er x
Wir
e G
aug
e
010.
465"
(8 A
WG
- s
ingl
e on
ly)
020.
312"
(14
AW
G -
sin
gle
or d
ual)
030.
250"
(14
AW
G -
sin
gle
or d
ual)
040.
230"
(14
AW
G -
sin
gle
only
)
050.
220"
(20
AW
G -
dua
l onl
y) -
R
eces
sed
not
ava
ilab
le
060.
187"
(20
AW
G -
sin
gle
only
)
10A
-Dim
ensi
on
(A) -
Sen
sor
Inse
rtio
n Le
ngth
****
*P
leas
e sp
ecify
(e.g
. 84
mm
= 0
0084
) (e
.g. 9
.5 in
ch =
009
50)
11C
erti
ficat
es
1Y
es1
ZW
ithou
t
31
76
54
211
109
9
No
tes:
1 See
Dat
a S
heet
CE
RT.
31 f
or
cert
ifica
te o
pti
ons
an
d d
etai
ls.
WIKA Alexander Wiegand SE & Co. KGAlexander-Wiegand-Straße 30∙63911 Klingenberg∙GermanyTel. +49 9372 132-0∙Fax +49 9372 132-406E-Mail [email protected]∙www.wika.de
Europe
AustriaWIKA MessgerätevertriebUrsula Wiegand GmbH & Co. KG1230 ViennaTel. (+43) 1 86916-31Fax: (+43) 1 86916-34E-mail: [email protected]
BelarusWIKA BelarusUl. Zaharova 50BOffice 3H220088 MinskTel. (+375) 17-294 57 11Fax: (+375) 17-294 57 11E-mail: [email protected]
BeneluxWIKA Benelux6101 WX EchtTel. (+31) 475 535-500Fax: (+31) 475 535-446E-mail: [email protected]
BulgariaWIKA Bulgaria EOOD1330 Sofia, 2Е Akad.Ivan Geshov Blvd.Business Center Serdika, office 3/104Tel. (+359) 2 82138-10Fax: (+359) 2 82138-13E-mail: [email protected]
CroatiaWIKA Croatia d.o.o.Hrastovicka 1910250 Zagreb-LuckoTel. (+385) 1 6531034Fax: (+385) 1 6531357E-mail: [email protected]
FinlandWIKA Finland Oy00210 HelsinkiTel. (+358) 9-682 49 20Fax: (+358) 9-682 49 270E-mail: [email protected]
FranceWIKA Instruments s.a.r.l.95610 Eragny-sur-OiseTel. (+33) 1 343084-84Fax: (+33) 1 343084-94E-mail: [email protected]
GermanyWIKA Alexander WiegandSE & Co. KG63911 KlingenbergTel. (+49) 9372 132-0Fax: (+49) 9372 132-406E-mail: [email protected]
ItalyWIKA Italia Srl & C. Sas20020 Arese (Milano)Tel. (+39) 02 9386-11Fax: (+39) 02 9386-174E-mail: [email protected]
PolandWIKA Polska spółka z ograniczoną odpowiedzialnością sp. k.ul. Legska 29/3587-800 WloclawekTel. (+48) 542 3011-00Fax: (+48) 542 3011-01E-mail: [email protected]
RomaniaWIKA Instruments Romania S.R.L.Bucuresti, Sector 5Calea Rahovei Nr. 266-268Corp 61, Etaj 1Tel. (+40) 21 4048327Fax: (+40) 21 4563137E-mail: [email protected]
RussiaZAO WIKA MERA127015 MoscowTel. (+7) 495-648 01 80Fax: (+7) 495-648 01 81E-mail: [email protected]
SerbiaWIKA Merna Tehnika d.o.o.Sime Solaje 1511060 BelgradeTel. (+381) 11 2763722Fax: (+381) 11 753674E-mail: [email protected]
SpainInstrumentos WIKA S.A.U.C/Josep Carner, 11-1708205 Sabadell (Barcelona)Tel. (+34) 933 938630Fax: (+34) 933 938666E-mail: [email protected]
SwitzerlandMANOMETER AG6285 HitzkirchTel. (+41) 41 91972-72Fax: (+41) 41 91972-73E-mail: [email protected]
TurkeyWIKA Instruments IstanbulBasinc ve Sicaklik Ölcme CihazlariIth. Ihr. ve Tic. Ltd. Sti.Bayraktar Bulvari No. 1734775 Şerifali-Yukarı Dudullu - IstanbulTel. (+90) 216 41590-66Fax: (+90) 216 41590-97E-mail: [email protected]
UkraineTOV WIKA PryladM. Raskovoy Str. 11, APO 20002660 KyivTel. (+38) 044 496-8380Fax: (+38) 044 496-8380E-mail: [email protected]
United KingdomWIKA Instruments LtdMerstham, Redhill RH13LGTel. (+44) 1737 644-008Fax: (+44) 1737 644-403E-mail: [email protected]
North America
CanadaWIKA Instruments Ltd.Head OfficeEdmonton, Alberta, T6N 1C8Tel. (+1) 780 46370-35Fax: (+1) 780 46200-17E-mail: [email protected]
MexicoInstrumentos WIKA Mexico S.A. de C.V.06600 Mexico D.F.Tel. (+52) 55 50205300Fax: (+52) 55 50205300E-mail: [email protected]
USAWIKA Instrument, LPLawrenceville, GA 30043Tel. (+1) 770 5138200Fax: (+1) 770 3385118E-mail: [email protected]
Gayesco-WIKA USA LP229 Beltway Green BlvdPasadena, TX 77503Tel. (+1) 713-475 0022Fax: (+1) 713-475 0011E-mail: [email protected]
Mensor Corporation201 Barnes DriveSan Marcos, TX 78666Tel. (+1) 512 3964200-15Fax: (+1) 512 3961820E-mail: [email protected]
South America
ArgentinaWIKA Argentina S.A.Buenos AiresTel. (+54) 11 47301800Fax: (+54) 11 47610050E-mail: [email protected]
BrazilWIKA do Brasil Ind. e Com. Ltda.CEP 18560-000 Iperó - SPTel. (+55) 15 34599700Fax: (+55) 15 32661650E-mail: [email protected]
ChileWIKA Chile S.p.A.Coronel Pereira 72Oficina 101Las CondesSantiago de ChileTel. (+56) 2 23651719E-mail: [email protected]
ColombiaInstrumentos WIKA Colombia S.A.S.Dorado Plaza,Avenida Calle 26 No. 85D – 55Local 126 y 126 ABogotá – ColombiaTel. (+57) 1 744 3455E-mail: [email protected]
Asia
AzerbaijanWIKA Azerbaijan LLCCaspian Business Center9th floor 40 J.Jabbarli str.AZ1065 BakTel. (+994) 12 497 04-61Fax: (+994) 12 497 04-62
ChinaWIKA International Trading (Shanghai) Co., Ltd.A2615, NO.100, Zunyi RoadChangning DistrictShanghai 200051Tel. (+86) 21 538525-72Fax: (+86) 21 538525-75E-mail: [email protected]. wika.com.cn
WIKA Instrumentation (Suzhou) Co., Ltd.81, Ta Yuan Road,SND, Suzhou 215011Tel. (+86) 512 68788000Fax: (+86) 512 68780300E-mail: [email protected]. wika.com.cn
IndiaWIKA Instruments India Pvt. Ltd.Village Kesnand, WagholiPune - 412 207Tel. (+91) 20 66293-200Fax: (+91) 20 66293-325E-mail: [email protected]
JapanWIKA Japan K. K.Tokyo 105-0023Tel. (+81) 3 543966-73Fax: (+81) 3 543966-74E-mail: [email protected]
KazakhstanTOO WIKA Kazakhstan050050 AlmatyTel. (+7) 727 2330848Fax: (+7) 727 2789905E-mail: [email protected]
KoreaWIKA Korea Ltd.#569-21 Gasan-dongSeoul 153-771 KoreaTel. (+82) 2 869 05 05Fax: (+82) 2 869 05 25E-mail: [email protected]
MalaysiaWIKA Instrumentation (M) Sdn. Bhd.47100 Puchong, SelangorTel. (+60) 3 80 63 10 80Fax: (+60) 3 80 63 10 70E-mail: [email protected]
PhilippinesWIKA Instruments Philippines, Inc.Unit 102 Skyway Twin Towers351 Capt. Henry Javier St.Bgy. Oranbo, Pasig CityTel. (+63) 2 234-1270Fax: (+63) 2 695-9043E-mail: [email protected]
SingaporeWIKA Instrumentation Pte. Ltd.569625 SingaporeTel. (+65) 68 44 55 06Fax: (+65) 68 44 55 07E-mail: [email protected]
TaiwanWIKA Instrumentation Taiwan Ltd.Pinjen, TaoyuanTel. (+886) 3 420 6052Fax: (+886) 3 490 0080E-mail: [email protected]
ThailandWIKA Instrumentation Corporation (Thailand) Co., Ltd.850/7 Ladkrabang Road, LadkrabangBangkok 10520Tel. (+66) 2 326 6876-80Fax: (+66) 2 326 6874E-mail: [email protected]
Africa / Middle East
EgyptWIKA Near East Ltd.Villa No. 6, Mohamed FahmyElmohdar St. - of Eltayaran St.1st District - Nasr City - CairoTel. (+20) 2 240 13130Fax: (+20) 2 240 13113E-mail: [email protected]
NamibiaWIKA Instruments Namibia (Pty) Ltd.P.O. Box 31263PioniersparkWindhoekTel. (+26) 4 6123 8811Fax: (+26) 4 6123 3403E-mail: [email protected]
South AfricaWIKA Instruments (Pty.) Ltd.Gardenview,Johannesburg 2047Tel. (+27) 11 62100-00Fax: (+27) 11 62100-59E-mail: [email protected]
United Arab EmiratesWIKA Middle East FZEJebel Ali, DubaiTel. (+971) 4 8839-090Fax: (+971) 4 8839-198E-mail: [email protected]
Australia
AustraliaWIKA Australia Pty. Ltd.Rydalmere, NSW 2116Tel. (+61) 2 88455222Fax: (+61) 2 96844767E-mail: [email protected]
New ZealandWIKA Instruments LimitedUnit 7 / 49 Sainsbury RoadSt Lukes - Auckland 1025Tel. (+64) 9 8479020Fax: (+64) 9 8465964E-mail: [email protected]
WIKA worldwide
