Date post: | 12-Oct-2015 |
Category: |
Documents |
Upload: | michael-sanders |
View: | 59 times |
Download: | 1 times |
of 4
CAMPROFILEGASKETSCAMPROFILEGASKETS
Camprofile Gaskets - Camprofile Gaskets -Camprofile Gaskets -Camprofile Gaskets -Camprofile Gaskets -Camprofile Gaskets -Camprofile Gaskets -Camprofile Gaskets -Cam-
Camprofile Gaskets
Teadit Camprofile gaskets have the following characteristics:
Operating pressure up to 5,000 psi (250 bar).
Maximum temperature up to 850 F (4550 C).
Wide range of service.
Less susceptible to flange imperfections than conventional flat metal gaskets. The thin Flexible Graphite or Expanded PTFE core fills up the flange irregularities and prevents the serrated finish from damaging the flanges.
introductionTeadit Camprofile gaskets offer outstanding flexibility and recovery, assuring seal integrity under pressure and temperature fluctuations, flange rotation, bolt stress re-laxation and creep.Teadit Camprofile gaskets are used by the chemical and petrochemical industry, as well as in power stations and refineries, on both standard pipework and special applica-tions, e.g. shell and tube heat exchangers, etc. Camprofile gaskets are constructed from a precision serrated metallic core with soft facing materials - flexible graphite or ex-panded PTFE - bonded to either side.Depending on the kind of metal used, TEADIT Camprofile gaskets can be used for all media from pH 0 to 14.
Designed to be used in most male/female and tongue and groove flanges in heat exchangers.
Camprofiles Gaskets Styles
MaterialTemperature - F (0C) Pressure
psi (bar)min maxGraflex -400 (-240) 850 (455) 5 000 (345)Expanded PTFE -400 (-240) 500 (260) 1 500 (100)
*The Pressure and Temperature range is related to the range of each component. The service range is the governing limit for the metal and covering combination selected. For example a Teadit 942 camprofile with a carbon steel core and Graflex covering has the following limits:
Maximum pressure: 5,000 psi (345 bar)
Temperature range: -40 F to 850 F (-400 C to 4550 C)
Style 942
Style 946Designed to be used in raised faced flanges like ASME B16.5 or ASME B16.47.The loose fitting outer ring allow Facing Material Limits* the thermal expansion of the serrated core.
Camprofile Gaskets
Loose Fitting Outer Ring
Camprofile Gaskets - Camprofile Gaskets -Camprofile Gaskets -Camprofile Gaskets -Camprofile Gaskets -Camprofile Gaskets -Camprofile Gaskets -Camprofile Gaskets -Cam-
Camprofile Gaskets
FR
P90
T
dimensions
nPS
Serrated Metal ring (inch) (d3) Centering ring Outside diameter (inch)
(d1) inside diameter
(d2) Outside
diameter
Pressure Class
150 300 400 600 900 1500 2500
1/2 0.91 1.31 1.88 2.13 2.13 2.13 2.50 2.50 2.753/4 1.13 1.56 2.25 2.63 2.63 2.63 2.75 2.75 3.001 1.44 1.87 2.63 2.88 2.88 2.88 3.13 3.13 3.38
1 1/4 1.75 2.37 3.00 3.25 3.25 3.25 3.50 3.50 4.131 1/2 2.06 2.75 3.38 3.75 3.75 3.75 3.88 3.88 4.63
2 2.75 3.50 4.13 4.38 4.38 4.38 5.63 5.63 5.752 1/2 3.25 4.00 4.88 5.13 5.13 5.13 6.50 6.50 6.63
3 3.87 4.88 5.38 5.88 5.88 5.88 6.63 6.88 7.753 1/2 4.37 5.38 6.38 6.50 6.38 6.38 7.50 7.38 -----
4 4.87 6.06 6.88 7.13 7.00 7.63 8.13 8.25 9.255 5.94 7.19 7.75 8.50 8.38 9.50 9.75 10.00 11.006 7.00 8.37 8.75 9.88 9.75 10.50 11.38 11.13 12.508 9.00 10.50 11.00 12.13 12.00 12.63 14.13 13.88 15.25
10 11.13 12.63 13.38 14.25 14.13 15.75 17.13 17.13 18.7512 13.37 14.87 16.13 16.63 16.50 18.00 19.63 20.50 21.6314 14.63 16.13 17.75 19.13 19.00 19.38 20.50 22.75 -----16 16.63 18.38 20.25 21.25 21.13 22.25 22.63 25.25 -----18 18.87 20.87 21.63 23.50 23.38 24.13 25.13 27.75 -----20 20.87 22.87 23.88 25.75 25.50 26.88 27.50 29.75 -----24 24.88 26.87 28.25 30.50 30.25 31.13 33.00 35.50 -----
tolerances
P: 0.04 inch
T: 0.117 to 0.131 inch for Style 942
T: 0.110 to 0.157 inch for Style 946
Serrated Metal Ring Inside Diameter (D1)NPS to NPS 8: 0.03 inchNPS 10 to NPS 24: 0.06 inch
Serrated Metal Ring Outside Diameter (D2)NPS to NPS 8: 0.03 inchNPS 10 to NPS 24: 0.06 inch
Centering Ring Outside Diameter (D3)for all sizes: 0.03 inch
Thickness Covering Layer: 0.020 inch
Typical Thickness for Loose Fit Centering Ring: 0.03 to 0.06 inch
Notes:
1. The groove angle shall be approximately 90 degrees.
2. F and R have a function of the pitch, depth, and angle of groove.
D2D1
D1D2D3
With more than 50 years of experience in the sealing industry, TEADIT stands for competence, quality and innovation. Our ex-tensive product range plus the flexibility to react competently and quickly to customers wishes have made us one of the market leaders in sealing technology. At TEADIT numerous manufacturing plants and sales agencies guarantee availability of the com-plete product range as well as competent service in every area of sealing technology. Baked by sophisticated technology and constantly growing know-how, TEADIT counts as one of the market leaders for stuffing box packings, expanded PTFE, sheet jointings, metallic and non-metallic gaskets, expansion joints, yarns and textiles.
Our Products
Properties and application parameters shown throughout this data sheet are typical. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommenda-tions consult TEADIT. Failure to select proper sealing products could result in property damage and/or serious personal injury. Specifications are subject to change without notice; this edition cancels all previous issues.
Jan/
06
teadit in the WOrld
www.teadit.com
TEADIT INTERNATIONAL (SHANGHAI / CHINA)
TEADIT JUNTAS (CAMPINAS / BRAZIL)
TEADIT INDSTRIA E COMRCIO (CAMPINAS / BRAZIL)
METALLIC AND NON-METALLIC GASKETS METALLIC EXPANSION JOINTS - termatic NON-METALLIC EXPANSION JOINTS - freeflex
MEChANICAL PACKINGS COMPrESSED ShEETS yArNS AND TEChNICAL TEXTILES PTFE GASKETING PrODuCTS
Solutions with Quality
Tead
it N
A D
ec. 2
0101465 East Sam Houston Pkwy South - 77503
Pasadena, Texas, USA Phone: (281) 476-3900 - Fax: (281) 476-3999
e-mail: [email protected]