BEKA LEDlume-mini
Technical Product Specifications
Page | 1
Table of contents
1. General Specifications 3
2. Photometry3
3. Mechanics 4
4. Electrical Characteristics 5
5. Power Supply 6
6. Environment 6
1. General Specifications
Product Description
The luminaire consists of a 3 compartment design concept, an optical compartment with LED engine, gear compartment and a spigot compartment. Both optical and gear compartments are rated IP66.Ease of installation of the luminaire is achieved by means of a hinging action onto the spigot base casting. It is secured by stainless steel latches and an access screw. Additionally an incorporated levelling device is provided on the base casting.The LED engine, consisting of the LED light source and the power supply which can be easily replaced or upgraded (Futureproof).The power supply is automatically disengaged when opening the luminaire. For added protection the luminaire is supplied with an integral 10kV/kA surge protection device.Additional safety is provided by means of electronic temperature monitoring preventing overheating of LEDs and power supply ( ThermiX®)The top casting has been designed to be able to incorporate ANSI C136.10—Locking-Type photocell devices receptacle (NEMA 3pin socket) and ANSI C136.41 – Locking Type receptacle (NEMA 7pin socket) for dimming control.LensoFlex® photometric engine allows flexibility of multiple light distributions to ensure that the specific requirements of each application are met.The luminaire housing is manufactured of marine grade cast aluminium (EN 1706 AC-44300).It is designed for LED light sources between 9W and 53W
Main applications Paths Bike Paths Residential Streets Commercial Streets
Recommended mounting height 4 to 8m
2. Photometry
Light source LED
LED 2mm2 LED
Colour Temperature Neutral White (4000K)Optional - Warm White (3000K)Optional - Cool White (5700K)
Color rendering (Ra) >70
LEDs / Wattage8LEDs @ 350ma 9W to 16LEDs @ 1000ma 53W * see table below
Lumen package1184lm to5328lm
Optics 5068, 5091, 5094, 5098, 5102, 5103, 5117, 5118, 5119, 5136, 5137, 5138, 5139, 5140, 5141
Photometry:
Overview Lifetime Residual Flux @ tq 25°C
Number of LEDs
Neutral White (4000K)
8 LEDs 16 LEDs @60.000h @100.000h
Current: 350mA**
Nominal Flux (lm)*
1184 2360
90% 70%
Power Consumption (W)
9 18
Current: 500mA**
Nominal Flux (lm)*
1600 3240
Power Consumption (W)
13 26
Current: 700mA**
Nominal Flux (lm)*
2064 4128
Power Consumption (W)
19 36
Current: 1000mA**
Nominal Flux (lm)*
2664 5328
Power Consumption (W)
26 53
(*) The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology(**) LED Current
3. Mechanics
Electronic Control Gear Constant Current Driver IP 66
Materials and finishing Housing – Marine Grade AluminiumProtector – High Impact Glass or Polycarbonate
Finish Natural FinishOptional RAL colours on request
Installation Pole Mount
Fixing Spigot Entry – ø42mm or ø60mm2 x ø8 Grub Screws
Dimensions (L *W *H) 450 x 235 x 88
Weight (with gear) 5.05 kg
Access Yes
4.Electrical Characteristics
Line Voltage 230VAC
Mains voltage Tolerance (AC) 108-305V
Line frequency 50Hz
Electrical Safety Class (IEC) Class I or II
Surge protection (SPD) Yes - 10kV/10kAOptional - 20kV/20kA
Lighting control Optional : - Downward facing daylight switch
- Pre-programmable standalone dimming
- OWLET Remote Management
Solar Version 12V and 24V versions
5.Power Supply
Power Factor ≥0.95
Removable Yes
Thermal Safety Yes
6. Environment
Storage temperature - 400C to +600C
Enclosure Tightness IP 66
Enclosure Mechanical Withstand Impact
IK 07Optional - IK08 (Glass)Optional - IK10 (Polycarbonate)
Enclosure Mechanical Withstand Vibrations
Modified IEC 60068-2-6
* Certified Test Standard SANS IEC 60598 -2-3 (available on request)
Updated by Approved by Document Revision / DateRui Silva Daniel Kasper 13/05/2016
(1) For specific Tq , Ta and lifetime data, contact BEKA Schréder