* Eng.OlegPetruk,Prof.Ph.D.D.Sc.Eng.RomanSzewczyk,M.Sc.Eng.WojciechWiniarski,IndustrialResearchInstituteforAutomationandMeasurements(PIAP),Warsaw.
**M.Sc.Eng.MichałNowicki,InstituteofMetrologyandBiomedicalEngineering,WarsawUniversityofTechnology.
OLEGPETRUK*,ROMANSZEWCZYK*,WOJCIECHWINIARSKI*, MICHAŁNOWICKI**
APPLICATIONOFGRAPHENEANDNEWLYDEVELOPEDAMORPHOUSALLOYSINCURRENTTRANSFORMERS
FORRAILWAYAPPLICATIONS
ZASTOSOWANIEGRAFENUORAZNAJNOWSZEJKLASYMATERIAŁÓWMAGNETYCZNIEMIĘKKICH–
MAGNETYKÓWAMORFICZNYCH WBUDOWIEPRZEKŁADNIKÓWPRĄDOWYCH
NAPOTRZEBYKOLEJNICTWAAb s t r a c t
Paper present practical solutions based on the utilization of graphene and amorphous alloys for construction of DC currenttransformer.Proposedsolutioniscompetitiveasforthemetrologicalpropertiesandoveralldimensions,andiswellsuitedforthemeasurementsoflargecurrentsintherailwaytraction.Useofamorphousalloysasmagneticmaterialsforlow-hysteresisandhigh-permeabilitycores,anddevelopmentofhighlysensitivegraphene-basedHalleffectsensors,allowforsubstantialimprovementsin theopenfeedback loopDCcurrent transformersconstruction. Inorder toverify theusefulnessof thedevelopedDCcurrenttransformer,itscharacteristicwasinvestigated.HighlinearityofthesensorisconfirmedbytheR-squareparameterexceeding0.99.Therepeatabilityofthemeasurementswasintherangeof1%.ThepropertiesofthesematerialsraisetheprospectofchangesintheconstructionoftheDCcurrenttransformersandopenuptheperspectiveofanumberofinnovativeprojectsintherailwayindustry,inthecurrentmeasurementsarea.
Keywords: graphene, amorphous alloys, current transformer
S t r e s z c z e n i e
Artykułprzedstawiapraktycznezastosowaniegrafenu i stopówamorficznychwaplikacjiprzekładnikaprądustałego.Zapropo-nowanerozwiązaniejestkonkurencyjnecodoparametrówmetrologicznychigeometrycznychorazjestdostosowanedopomiaruprądówowysokimnatężeniuwystępującychwkolejnictwie.Wykorzystaniemagnetykówamorficznychjakomateriałówdowyko-naniardzeni,którecharakteryzująsięznacznąprzenikalnościąmagnetycznąiznikomąhisterezą,orazwysokoczułychhallotronówwykonanychzgrafenupozwalanapoprawęwłaściwościprzekładnikówprądustałegozotwartąpętląsprzężeniazwrotnego.Wcelusprawdzeniaużytecznościskonstruowanegoprzekładnikazostałazbadanajegocharakterystyka.Liniowośćcharakterystykiwba-danymzakresiepotwierdzonowspółczynnikiemdeterminacjiliniowejwynoszącym0,99.Uzyskanopowtarzalnośćpomiarównapoziomie1%.Właściwościużytychmateriałówbudząperspektywęzmianwobszarzebudowyprzekładnikówprądowychiotwie-rająperspektywęwieluinnowacyjnychprojektówwkolejnictwiewobszarzepomiaruprądu.
Słowa kluczowe: grafen, stopy amorficzne, przekładnik prądowy
TECHNICAL TRANSACTIONSELECTRICAL ENGINEERING
1-E/2016
CZASOPISMO TECHNICZNEELEKTROTECHNIKA
DOI: 10.4467/2353737XCT.16.035.5297
132
1. Introduction
Thetendencytochangetheelectricenergypaymentmethodinrailways,fromlump-sumtochargeforenergyactuallyused,raisestheneedtodevelopnewdevicestomeasuretheamountofusedenergy,oradaptoldones.Thecurrentdrawby the locomotive isashighasseveralkiloamperes.Themeasurementofsuchcurrents,incombinationwiththePolishpowersupplylinesstandard,isnotaneasytask.
Presently, DC current transformers are most commonly used for this purpose [1].Thereareseveraldifferentkindsofsolutionsforthesedevices.Inthispaper,proposalsforimprovementsintheDCcurrenttransformerwithopenfeedbacklooparepresented,basedonthemodernmaterials:grapheneandamorphousalloys.
ThebasicelementsoftheDCcurrenttransformerare:gappedmagneticcoreandmagneticfield sensor [2].Traditionally, for their construction, coresmade of transformer plates orceramicmagnetics(ferrites)areused.Asthemagneticfieldsensors,Halleffectsensorsorfluxgateswereutilised.Duetotheeasyutilisationandsimplerelectroniccircuits,Halleffectsensorsaremorepopular.TheyaremostlybasedonGaAsorInSbstructures.
Experienceintheuseofamorphousalloysasmagneticmaterialsforlow-hysteresisandhigh-permeabilitycores[3],andthedevelopmentofhighlysensitivegraphene-basedHalleffectsensors[4],allowforsubstantialimprovementsintheopenfeedbackloopDCcurrenttransformer’sconstruction.
TheaimofthepaperistopresentpracticalsolutionsbasedontheutilisationofgrapheneandamorphousalloysfortheconstructionofanewtypeofDCcurrenttransformer.
One of themain advantages of electric vehicles is the possibility of energy recoveryduring braking,which is called recuperation. Recuperation allows for a reduction of theenergy demand by re-using the breaking energy. In recent years, research in the field ofstoringandre-usingregenerativebrakingenergyhasbecomeveryintensive.Thisiscausedbyanincreasingnumberofvehiclesequippedwithrecuperationsystemsandglobaldemandsforreducingtheconsumptionofelectricalenergy.
IntypicalDCsupplysystemsofthepublictransport(tramways,trolleybuses),recoveredenergycanbere-usedbyauxiliaryreceiversinabreakingvehicleorbytheothervehicles.Ifthereisnovehicle,whichisaccelerating,thisenergyisturnedintoheatinbreakingresistors.Inordertoavoidsuchasituation,energystoragesystemscanbeused,e.g.supercapacitorsorflywheels.Nowadays,manyenergystoragesareinoperationintram,trolleybusandmetrosystems.Optimisation of the parameters and location of storage devices for regenerativebreakingenergyhasbecomeverysignificant[1–6].
Storage devices can be divided into two groups: on-board energy storage devices,whichareplacedinthevehiclesandoff-boardenergystoragedevices,situatedintractionsubstationsorbetweenthem.Currentresearchisfocusedmainlyontwoobjectives.Thefirstis to reduce the energydemandby introducingon-board energy storages in light electricvehiclesliketrams,trolleybusesorelectrobuses[7–9].Thelatteristoprovideasupplyingsystemforheavyelectricvehicles(trains,metro)withanoff-boardenergystorage[10–13].Incontrasttothis,alackofresearchinthefieldofoff-boardstorageenergysystemsforlightelectricvehiclescanbenoticed.TramandtrolleybustransportationishighlydevelopedinplentyofEuropeancities.Manytramandtrolleybusesoperatorsconsiderputtingintoserviceoff-boardenergy storage systems.Thismotivated theauthors toanalyse theefficiencyofregenerativebreakinginthetrolleybussupplyingsystemusingoff-boardenergystorage.
133
2. Principle of operation
According to the Ampere’s Law, electric current flow in the conductor generatesamagneticfieldaroundit.Thegeneratedmagneticfieldisdirectlyproportionaltothecurrentintheconductorandinverselyproportionaltothedistancefromtheconductor,asgivenintheequation:
B IR
=⋅µπ2
(1)
where:B –Magneticfieldinductionvalue,I –currentintheconductor,R –distancefromtheconductor,µ –magneticpermeability.
The magnetic field induction vector direction is following the right hand rule. ThegeneratedmagneticfieldisconcentratedbytheDCcurrenttransformercore.Theairgapinthecoreiscuttoaccommodatethemagneticfieldsensor.Thesensormeasurestheairgapmagneticfieldandconvertsitintoavoltagesignalproportionaltoitsvalue.
ThelayoutofthedeviceisschematicallypresentedinFigure1.
Fig.1.Schematicdiagramofcurrentsensor:1–magneticfieldconcentrator, 2–Hallsensor,3–wireundertest
Therelationshipbetweenthemagneticfieldinthecoreandthefieldinthegapisdescribedby theformula(2)[1,6].Thisformula indicates that,as thegapwidth increases, thefieldvalueinthegapdecreases.
B Il
l ll
Bexp
p
pin= −
−µ
µµ0 0
(2)
134
where:Bex– magneticfieldinductioninthegap,Bin – magneticfieldinductioninthecore,I – electriccurrent,l – magneticpathinthecore,lp – airgapwidth,µ – relativepermeabilityofthematerial,µ0 – magneticpermeabilityofthevacuum.
Theairgapinthecoreservesasthemountingplaceforthemagneticfieldsensor–Halleffectsensor.Itmeasuresthemagneticfieldvalueandoutputsaproportionalvoltagesignal.
Bymeasuring themagnetic field induced by the primary circuit, and not directly thecurrent,weobtaingalvanicisolationbetweentheprimarywindingandthemeasuringsystem.Itisespeciallyimportantforthemeasurementofhighvoltagecurrents.
3. The technical solution of the developed DC current transformer
Thedesignedmeasuringsystemconsistsofafewbasicelements:theprimarywinding– conductor of themeasured current, the gappedmagnetic core and aHall effect sensor.AschematicdiagramofthedevelopedDCcurrenttransformerisshownonFigure2.
Fig.2.Schematicdiagramofadigitallycontrolledcurrenttransformer
As the magnetic sensor inside the gap, an innovative graphene Hall effect sensor isused.Thesensorsbasedongraphenehaveaveryhighsensitivity(3000V/AT)[4]andgoodresolutionaswellasstabilityoftheparametersasafunctionoftemperature[6].ExemplarygraphenebasedHalleffectsensorcharacteristicisshowninFigure3.
Fig.3.Halleffectsensorcharacteristic
135
M-333magneticcoremadeofamorphousribbon,producedbyMagnetec,wasusedinthedevice.Thecoremadeof suchmaterialhasveryhigh relativepermeability (~30000)[8], linearcharacteristic,external influenceresistanceandlowtemperaturecoefficient[9].Geometricdimensionsofthecore:50×45×5mm.Airgapwidth:2mm.
TheDCcurrenttransformermadeoftheabovementionedelementsispresentedinFig.4.
Fig.4.ConstructedDCcurrenttransformer
4. Measuring stand
InordertoverifytheusefulnessofthedevelopedDCcurrenttransformer,itscharacteristicwasinvestigated.Forthemeasurements,thelaboratoryteststandpresentedschematicallyinfigure5wasbuilt.ItconsistoftheInmelindustrialcalibrator,primarywindingwithn =1000numberofturns,thedevelopedDCcurrenttransformer,Fluke8808AprecisionvoltmeterandMotechlaboratorypowersupply.DataacquisitionwasdoneonaPC.
Fig.5.Schematicoftheteststand
136
Thecalibratorcurrentwassetintherangeof0–200mA,whichtakingintoaccounttheprimarywinding, inducedamagneticflux in the core corresponding to the current rangeof0–200A.
5. Measurement results
TheresultsofthemeasurementsforthedevelopedDCcurrenttransformerarepresentedinFigure5.Itshouldbeindicatedthatalinearcharacteristicofthedevice’soutputvoltagewasachievedforthemeasuredcurrentsintherangeofupto200A.
Fig.6.ExperimentallymeasuredcharacteristicofthedevelopedDCcurrenttransformerwithitslinearfit
Linearfitof the function f(x) = k∙x +b,wherek =–0.0015V/Aandb =7.72Vwasmadebytheleastsquaremethod.HighlinearityofthesensorisconfirmedbytheR-squareparameterexceeding0.99.Therepeatabilityofthemeasurementswasintherangeof1%.
6. Conclusions
The proposed solution is competitive because of the metrological properties and overalldimensions,andiswell-suitedforthemeasurementsoflargecurrentsintherailwaytraction.ThegoodlinearityandhighsensitivityoftheDCcurrenttransformerutilisinganamorphousalloycoreandgrapheneHalleffectsensorwasconfirmed.ThepropertiesofthesematerialsraisetheprospectofchangesintheconstructionoftheDCcurrenttransformersandopenuptheperspectiveonanumberofinnovativeprojectsintherailwayindustry,inthecurrentareaofmeasurements.
This work was partially supported by The National Center for Research and Development within the GRAFTECH Program.
137
R e f e r e n c e s
[1] Ramsden E., Hall-Effect Sensors. Teory and application, Second edition, Elsevier,Newness2006.
[2] RipkaP.,Magnetic Sensors and Magnetometers,Artech,Boston2001.[3] Salach J.,Hasse L., SzewczykR., Smulko J., BienkowskiA., Frydrych P.,Kolano-
-BurianA.,Low Current Transformer Utilizing Co-Based Amorphous Alloys, “IEEETrans.Magn.”,48,2012.
[4] PetrukO.,SzewczykR.,CiukT.,StrupińskiW.,SalachJ.,NowickiM.,PasternakI.,WiniarskiW.,TrzcinkaK.,Sensitivity and offset voltage testing in the hall effect sensors made of graphene, “Automation2014”,Warszawa2014.
[5] PetrukO.,SzewczykR.,SalachJ.,NowickiM.,Digitally controlled current transformer with Hall sensor, “Automation2014”,Warszawa2014.
[6] NałęczM.,JaworskiJ.M.,Miernictwo magnetyczne,WNT,Warszawa1968.[7] XuH.,ZhangZ.,ShiR.,LiuH.,WangZ.,WangS.,PengL.M.,Batch-fabricated high-
performance graphene Hall elements, “NatureSci.Rep.”,Vol.3,1207,pp.1–8.[8] http://www.magnetec.de/en/nanopermr-products/metering-products[online:2.06.2016].[9] Kulik T., Ferenc J., Kolano-Burian A., Magnetically soft nanomaterials for high-
temperature applications,“JournalofAlloysandCompounds”,434,2007,pp.623–627.