Cap�LampModel�KL4.5M
Technical�Datasheet
Features�
�
�
The KL4.5M is a high brightness, lightweight LEDminer’s safety cap lamp using a high capacity 4.5AhLi-Ion battery. Two brightness levels can beselected via a single switch.The cap lamp is constructed of a durable anti-staticplastic and the enclosure is explosion proof makingit suitable for fiery mines.The unit provides cost benefits as a result of lowermaintenance, longer service life (as compared tolead acid battery based products) and lessproduction time lost due to equipment failures andcheaper end of life disposal.
Operation�
�
�
The cap lamp provides continuous illumination formore than 15 hours at full brightness.The battery recharges within 6 hours and has anexpected life of over 1000 recharge cycles.The unit also incorporates a battery indicator andclock function.
Maintenance�
�
�
All service work to be performed by authorised AECElectronics personnel only.Approved for use in fiery mines.Cap lamp should only be charged with suppliedcharger.
Specifications
Warning�and�DisclaimerThe�information�and�recommendations�in�this�document�are�provided�for�reference�purposes�only�and�should�not�be�construed�as�advice�to�cover�every�application�of�the�product
or�variation�of�conditions�under�which�the�product�may�be�used.
6�hours�using�4.5V�1A charger.Charging Time
Single�piece�durable�plastic.Construction
77mm�x 61mm�x 55mm.Unit�Dimensions
0.24kg.Unit�Mass
-5°C�to�45°C.Temperature�Range
6�auxiliary�LEDs.Auxilary�LED�Light
1W�>40�Lumens.Main�LED�Light
>15�hours�(using�main�LED).Continuous�Usage Time
MASC�M/11-472X.IA Certificate�Number
Intrinsically�Safe�IA Approved
Unit�Dimensions
61mm
77mm
55mm
BatteryType
Capacity
3.6V�4.5Ah�Li-Ion.
>1000�recharge�cycles.
AEC�Electronics�(Pty)�Ltd
Tel:�+27�11�975-1643���Fax:�+27�11�975-1680Email:�[email protected]���http://www.aece.co.za
P.O.Box�958,�Kempton�Park,�1620,�South Africa