TektōnTM Tower Building Guide
TM
Buildings you can build 4
Curious about buildings? 6
Intro to Tektōn™ Tower 8
Listing of parts in the set 10
How the parts work 12
Blueprints (how to build) 15
Did you know? (fun facts) 18
CAD drawings 20
Contact us 22
What’s inside
1.63
R0.05
2.00
4 5
the possibili t ies are endless...
Are you curious about How buildings are made?
How bridges work?
How chemical plants operate?
6
1.63
R0.05
2.00
Tektōn™ Bank Building
The parts in each of these sets are interchangeable with the other sets, and the sets can be combined to create entire cities: complete with office buildings, airports, highways, and manufacturing plants.
The building sets are designed to be replicas of actual buildings and bridges using a 1/87 scale (also known as HO scale)
Investigate the strongest structure for a tall building with the Girder and Panel™ set.
Or the strongest design for a bridge with the Bridge and Turnpike™ set. Or have fun pumping water through tanks and changing the water flow by opening and closing valves in the piping with the Hydrodynamic™ set!
These classic sets help you understand and test the basic concepts of building strength (physics) and how water moves (fluid dynamics) in a fun, and creative way.
Accessories
Tektōn™ Plaza Building
The Girder and Panel™, Bridge and Turnpike™, and Hydrodynamic™ building sets were developed to help answer these questions!
7
1.63
R0.05
2.00
Introduction to your TektōnTM Tower Set.
About the Toy:The Tektōn™ Plaza Set (appropriate for ages 6 and up)
allows you to design and construct quite large and magnificent
buildings! Experiment with cantilever construction and
unique architectural designs. This set can be used to build
office buildings, department stores, hospitals, and much more:
your imagination is the limit!
The sets includes plastic columns and beams which are
interlocked together to create the basic outside frame, just
like real buildings are built using iron beams and columns.
Then, thin plastic panels are added to the outside of the
frame, creating solid walls, windows and doors on the
frame. The building is completed with roof panels, decorative
flags and signs. Because the parts are scaled to the common
HO scale (1/87), many accessories such as cars, trucks, trees,
and trains can be added to your model city.
About Bridge Street ToysA privately held company, Bridge Street Toys is located in a
suburb of Boston, Massachusetts. The company was founded
by two engineers who strive to provide fun products that will
inspire children to pursue careers in engineering, architecture,
and technology.
About Girder & PanelTM
Girder & Panel™ differs from other construction sets in that it
lets children experiment with real engineering principles. The
sets, which are perfect for science fair projects, allow the
builder to investigate and create structures that are both tall
and strong. Originally introduced by Kenner Products in the
1950’s, there is an entire generation of engineers and
architects who have many fond memories of playing with this
set as children. Fifty years later, we are proud to be able to
bring this inspirational toy back to market!
Some of the buildings you can construct(instructions on pages 15 –17) Remember you can make
your own variations and designs – the possibilities are endless!
98
1.63
R0.05
2.00
Included with TektōnTM Tower
10 11
1 idea book
5 footings
90 beams
70 columns
20 stubs 9 roof panels
36 window panels
6 utility wall panels
6 door panels
4 signs
1 storage case
6 flags
8 lobby window panels
TM
UNDER CONSTRUCTION
1 template for notching panels
1.63
R0.05
2.00
12 13
Another column or stub can be used to lock the beams in place.
4th Once your structure is built, attach the panels to the side using the three pegs. Start with the ground floor and then work your way up the side of your structure.
5th Now for the finishing touches.
Roofs: Lay the roof panels on the top of your building.Push them down gently until they are flush with the beams. Stubs may be used to secure the roof panels in place, though they are not necessary.
Flags and Flag Poles: Bend the flag slightly and insert notches in flag between two small posts on flagpole.Then insert the flag pole into the top of a stub or column.
How The Parts Work
Like this for a rectangular shaped building.
2nd Take the columns (see page 4 if you need help figuring out what the column looks like) and place them in the square holes in the foundation pieces (footings).
3rd Connect pairs of columns with a beam. The notch on the top of the beam slides into the top slot in the column.
1st Start with a solid foundation. Place the footings together to form the shape of the structure you will build. place panel onto these 3 pegs
Tip: The columns may be a tight fit the first time that you put them into the footings. However, after a couple of uses, they fit perfectly and are easy to use!
1.63
R0.05
2.00
15
Blueprints (Hospital Tower)
14
How The Parts Work (continued)
Your cantilever can be built with or without the support of a second level of beams.
6th (extra info) When your building has an inside corner, the panels will not fit because a beam or another panel is in the way. You will need to cut the two panels that will form the inside corner.
Once you have notched your panels, you are ready to attach them to your structure.
notched panel placed onto structure
Take one panel and trace the corner to be cut using the provided stencil.
Take the other panel and trim 1/4 inch off the entire side.
1/4 inch sq.
{1/4 inch
Extra Credit: Build a cantilever section on your structure. A Cantilever is any part of the building that is not supported using columns from the ground level, and functions as an overhang. Cantilevers can be many stories high and can be as wide as your building structure.
panel’s side was cut to make it fit
1.63
R0.05
2.00
16
Blueprints (Office Tower) Blueprints (Transportation Terminal)
17
1.63
R0.05
2.00
Did you know?
18 19
Did you know?
The word skyscraper was originally used to describe a tall mast or sail on a sailing ship.
Taipei 101, in Taiwan, became the tallest building in the world in October, 2003. The building houses a five-story shopping mall, seven-story Taiwan stock exchange, a largerestaurant, and many corporate offices. The building has a total of 101 floors!
Because the number 8 is a symbol for prosperity and luck in Chinese culture, Taipei 101 has 8 stacked segments in its architecture, which are made to look like the shoots of a bamboo tree.
To qualify as a skyscraper the building has to be at least 500 feet (150m) tall.
It is sometimes hard to define which building in the world is the tallest because buildings can be measured in three ways: the tallest height to roof, tallest to structural top, and tallest to occupied floor.
The Sears Tower in Chicago could be considered as the tallest in the world if it were measured from the ground to the highest attached part (the Sears Tower has very tall antennas on its roof). However, antennas are not considered as part of a building because they are not actual structures, making it the 3rd tallest building in the world!
As buildings get taller, wind loads become an increasingly important design consideration since architects and engineers need to prevent tall buildings from swaying during strong wind storms.
The process of building skyscrapers is very different from the process used to build ordinary buildings that are less then four stories high. Smaller buildings can be supported by their walls, while larger buildings must be supported by their frame: columns and beams (such as ones in this set). The walls then hang off this frame, just like the panels do in your set!
Sears Tower
1,671 ft
1,250 ft
1,486 ft
Taipei 101 Petronas Towers Sears Tower Empire State Building
1,450 ft
1.63
R0.05
2.00
20 21
CAD Drawings “CAD” (which stands for “Computer Aided Design” ) is a computer program that helps real engineers make sketches of their work. The program allows you to rotate your creation, so that it can be viewed from different sides and angles.
top view (bird’s eye view)
view from the front view from the side
3-D view of the building (as seen from the top and side of the structure).
Transportation Terminal
Scale: 1:8 Created by: BST
9/21/2005 Material: Plastic
21.00”
3.12”
4.00”
6.72”
1.63
R0.05
2.00
Other Products From Bridge Street Toys
And there aremany more productson the drawing board
Bridge-Mania, a Bridge & Turnpike™ Building Set
City Buildings, Girder & Panel™
Building Sets
A Skyscraper, a Train Station, and
Boston Turnpike Set
Hydrodynamic™ Building Set
23
© 2005, Bridge Street Toys LLCWeston, MA 02493
www.BridgeStreetToys.com
Have a Problem Or a Question?Contact Us Please let us know if we can help you. [email protected]
Have a Great Idea?Do you have a great idea for a building and want to share it with other builders?
Send it to us at: [email protected]
We will post pictures of creative buildings on our website’s Hall of Fame page.
p.s. Please send your photo in “jpeg” format and include your first name and age.
Need More Parts?No problem. We are selling spare parts! Check with your favorite local, educational toy shop, if they’re not available there you can order them online through our website:ht tp://www.Br idgeStreetToys.com
Our Promise to YouWe guarantee our products to be free of materials and manufacturing defects. Should your building set have a defect which makes the set unusable, please contact our customer service department for a replacement product.
22
© 2005, Bridge Street ToysTM LLCWeston, MA 02493
www.BridgeStreetToys.com