Telescopic Truck Crane - CraneDude · The New HTC-8650 telescopic truck crane features unmatched...

HTC-8650 50-ton

110' (33.53 m) Full Power 4-Section Boom172' (52.43 m) On-Board Tip HeightTwo Powertrain OptionsTwo Attachment Options

Telescopic Truck Crane

The New HTC-8650 Features TheConfined Area Lifting Capacities(CALCTM) System

• Loaded With Advances...Not Compromises •

An Office With A View....A major step forward in the construction equipment industry,the new environmental ULTRA-CAB found on the HTC-8650is molded from an LFC•2000 construction process featuringlaminated fibrous composite material. Laminated fibrouscomposites are a hybrid class of composites with laminationtechniques. The layers of fiber-reinforced material are builtup with the fiber directions of each layer typically oriented indifferent directions to add strength and stiffness.

This fibrous composite technology offers superior advan-tages over steel in sound reduction with sound levels one-half as loud as conventional cabs. This fibrous compositematerial, while eliminating corrosion, also adds dimensionalstability and allows modern styling techniques to be utilizedincluding molded radii and ribs. Designed with the operatorin mind, the cab features:

Fabric Seat New improved six-way adjust-able seat with height-adjustable armrestsand 45° reclining seat back.

Hydraulic Control Levers Armrest mounted,responsive dual axis controllers stan-

dard. Single axis available.

Lift-Up Armrest Leftarmrest lifts up out ofthe way providing out-standing operator easein entering or exitingthe cab. For safety, allcontrol functions be-come inactive when the

armrest is in raised position.

Overhead Console with switchesfor outrigger controls, lights, fan,

windshield wiper, function lockout, swing park brake, andignition.

Bubble Level Sight level mounted on side console.

Single Foot Pedal Control Hydraulic pilot controlled forsimultaneous extension or retraction of power boomsections.

Ducted Air through automotive style directional vents.

Comprehensive Instrumentation Corner post mountedbacklighted gauges monitor hydraulic oil temperature,fuel level, coolant temperature, oil pressure and voltage.Corner post also has stop engine and check engineindicator lights and tachometer.

Integral Rated Capacity LimiterThis “LMI” system aids the operator insafe and efficient operation by continu-ously monitoring boom length, boomangle, head height, radius of load,machine configuration, allowed load,actual load, and percent of allowed load.This Microguard 434 graphic audio-visualsystem features improved access time,improved radio frequency shielding, anew display panel with large liquid crystalalphanumeric display, total systemoverride capabilities to provide for rigging requirements andan expanded memory which provides capacity informationon all possible lift configurations.

An exclusive new feature available on the HTC-8650 is theOperator Defined Area Alarm. By setting two points, theoperator creates an imaginary vertical plane to maintain asafe working distance from nearby obstacles. Should theoperator attempt to operate the crane beyond the plane,the RCL will sound an alarm.

An optional graphic display bar, positioned near the top ofthe windshield for optimum viewing during crane operation,is available. This bar constantly alerts the operator of thecurrent lift capacity situation through a series of green

(within capacity range), yellow (approaching 90%chart limit), and red (100% of chart limit) lights.

State-of-the-Art Wire HarnessThe HTC-8650 with its multi-plex gauge

package has automotive-type wire har-nesses with sealed relays and connectorsthroughout for outstanding long termreliability. In addition, all wires have a

flame retardant, poly-ethylene insulation,resulting in a higherheat resistant wiringsystem.

• C O M F O R T • C O N T R O L •Maximum Comfort and Control...standard operating values on the HTC-8650 with its revolutionary fibrouscomposite cab – the ULTRA-CABTM, gear motor winches, and integral rated capacity limiter (RCL).

Additional Cab Features Include:• Dash-less design for superior visibility.• Automotive style windshield and large side window pro-

vides operator with 25% more glass area.• Sliding right side and rear windows and swing-up roof

window provide excellent ventilation.• Large sweep electric wipers.

P O W E R • P R O D U C T I V

11-speed for-ward, 3-speedreverse transmis-sion, features elec-tronic throttle controland cruise control. The8650 can travel at a .5 mph(.80 km/hr) creep speed @idle for maximum maneuverabil-ity on the job site and run up to58 mph (93 km/hr) top speed on thehighway, unmatched in the industrytoday. If “more power” is what youdesire, an optional 365 horsepowerDetroit Diesel Series 60 engine is available.

Carrier Cab The carrier cab and enginecowling are also manufactured from laminatedfibrous composite material which is combinedwith acoustical treatments to assure the operatorof maximum highway comfort.

Additional features includedash mounted comprehen-sive instrumentation withattractive lighted gauges,sliding side and rear windowsand roll up/down door win-dow for excellent ventilation,fully adjustable air ride fabric

seat, suspended pedals, and rear view mirrors. Cruise controland engine brake controls are conveniently locatedon transmission shift lever.

TransportabilityThe HTC-8650 offers superior roadability complete with172 ft. (52.43 m) of on-board tip height. Transportability isenhanced by the unique counterweight design. In addition tothe standard 5,000 lb. (2 268 kg) counterweight, two 3,000

lb. (1 361 kg) slab-typecounterweight pieces andcounterweight lowering areavailable. This hydraulicremoval system can posi-tion one or both of thesecounterweight slabs on thecarrier deck for most effi-cient axle load distributionor can lower them directly

onto a trailer for transport. Counterweight removal cylindersare recessed in the upper frame for protection.

Wide Stance Carrier An 8' 6" (2.59 m) wide carrier with231" (5.87 m) wheelbase provides ‘big feet’ for a stable liftingbase. The Link-Belt 8 x 4 carrier features:• Large strategically located grab handles/steps and mid-

mount access ladders provide superior accessibility tocarrier deck areas and engine for routine maintenanceand service.

• Flat deck area.• Lightweight aluminum outrigger floats with a “quick latch”

feature.• Throttle-up switch at outrigger control station.• Self-storing fifth outrigger steel pontoon.• Full air, S-cam brakes on all wheel ends with automatic

slack adjustors.• Rack and pinion steering puts the operator in complete

control. This two steering gear system does not haveexposed machined surfaces which can be easily dam-aged by rocks and debris.

• Air service ports.• Complete DOT approved light package including side

mounted clearance/turn indicator lights.• Aluminum fuel tank for less condensation and corrosion.

Power Train Utilization of a Detroit Diesel Series 50engine and Eaton transmission translates to maximumparts availability as these components are common to theconstruction and on-highway truck industry. The DetroitDiesel 315 horsepower (235 kW) engine, coupled to the

Link-Belt has never been content simply to build cranes the sameway as everyone else...the new HTC-8650 proves that again.With 172' (52.43 m) of on-board tip height, superior capacities,innovative engineering, attachment flexibility, and available counter-weight lowering for balanced axle loadings for travel, this crane isloaded with advances instead of compromises.

V I T Y • R E L I A B I L I T YPaint Coating System Link-Belt utilizes a two-part coating technology coupled with a pre-assemblypaint process to provide the finest quality coating systemavailable today. This new coating technology providessuperior adhesion and abrasion resistance. Becauseall parts are painted before assembly, 100% coverageof each part is realized, virtually eliminating corrosionbleed-through that is common with other paint processes.

Serviceability Wide opening engine doors provideexcellent accessibility, fittings are staggered for easyservicing, and standard quick disconnects installedat various locations in the hydraulic system allow thehydraulic pressure to be quickly and easily checked withLink-Belt’s exclusive diagnostic kit (optional). The drivercan use the stop engine and check engine indicatorlights to troubleshoot the engine. An engine diagnosticconnector, located under the carrier cab dash, allows

an engine service technician to further analyze engineproblems with an engine diagnostic data reader.

Gear Motor Hydraulic Hoist SystemThe standard load hoistsystem consists of:

• 2M main winchwith two-speed motorand automaticbrake for powerup/down modeof operation.

• Asynchronous, parallel doublecross-over grooved drumsminimize rope harmonicmotion, improvingspooling and increasingrope service life.

• Standard rotation resistant rope.• An available two-speed 2M auxiliary winch. On the

two-winch machines, an independent winch functionlockout is provided. When this mode is selected, theoperator won’t inadvertently operate a winch whichhas been shut down preventing a two blocking orrope “bird nesting” situation.

Multi-Function Control For greater productivityand control, the five pump-section hydraulic circuitprovides smooth, simultaneous function of winch,boomhoist, swing, and drums.

State-Of-The-Art Oil Seal TechnologyThe HTC-8650 featuresimproved seals onboomhoist, boomextend/retract, andoutrigger jack cylinders.This new ‘redundant’ oilseal technology incor-porates 3 rod sealingsurfaces versus one or

two found on com-petitive models. Thisnew seal design ishighly resistant to side loading and pressurespikes for outstanding sealing performance andwhen incorporated with full O-ring face seal tech-

nology used throughout the machine, leadsto an environmentally dry system.

Computer-Aided DesignAdvanced, high speed computer-aided, state-of-the-art designs are measured by their reliableperformance through extensive testing and re-testing before Link-Belt endorses a new idea,assuring the customer of real user value andmaximum on-the-job performance.

4-Section Full Power Boom With A-max Mode

Exclusive A-max boomextend mode

Two standard boom extension modes enhancethe 8650’s performance and provides theoperator the capability to match the crane’sconfiguration to specific jobsite conditions. Formaximum tip height the basic boom extensionmode (mode ‘B’) offers a full power, synchronizedmode of telescoping all sections proportionally to110' (33.53 m). To enhance performance, theexclusive A-max mode (or mode ‘A’) extendsonly the inner mid section to 60.3' (18.38 m)offering substantially increased capacities forin-close, maximum capacity picks.Basic boom extend mode –

boom mode ‘B’

The New HTC-8650 telescopic truck crane features unmatched innovations such as the ConfinedArea Lifting Capacity System (CALCTM) and two modes of boom extension...innovative designfeatures that have become industry standards from Link-Belt.

• I N N O V A T I O N S •

Confined Area LiftingCapacities (CALCTM)The HTC-8650 is specifically designedto allow contractors to work in con-fined work areas where full outriggerextension is not possible. The CALCsystem provides the operator withthree outrigger positions (full exten-sion, intermediate, and retracted).Outriggers may be extended to anintermediate position where workingarea is limited or, in extremely tight quarters, lifts canbe made with outriggers fully retracted. In the fullyretracted outrigger mode, lift capacities are signifi-cantly improved over the ‘on tires’ configuration.When the extend position pins , located on top ofthe outrigger boxes, are engaged, the operator canset the crane in the intermediate or fully retractedoutrigger mode withouthaving to leave the cab.A thorough, easy-to-readcrane rating manual givesthe operator comprehen-sive capacities coveringthe three outrigger posi-tions, five counterweightconfigurations, and all at-tachments plus ‘on tires’capacities.

Retracted Outriggers7' 9" (2.36 m) Spread

Fully Extended Outriggers20' 6" (6.25 m) Spread

Intermediate Outriggers14' 2" (4.32 m) Spread

• P A T E N T E D B O O M •

Stowable Attachments Swing-away lattice flys are easilystored for transportability or can be removed to meet specificroad laws.

Authorized Link-Belt Distributor

Link-Belt Construction Equipment Company Lexington, Kentucky #4216A unit of Sumitomo Construction Machinery Co., Ltd. www.linkbelt.com® Link-Belt is a registered trademark. We are constantly improving our products and therefore reserve the right to change designs and specifications. Copyright 1998. Litho in U.S.A. 4/98

Embossed Sidewall StiffenersWith No-Weld CornersBoom Concept The arrangement of high strength angle chords (corners)with high formability steel sidewall (embossments) places the most steel at

corners where maximum stress is concentrated. The result:maximum strength with minimum weight.

Angle Chords 100,000 psi (689.5 MPa) highstrength steel angle chords are precision

machined for boom sidewall overlap. This design allows all interior and exterior boom welds to be offset or staggered for maximum structural integrity.

Time Proven Boom Design Over twodecades and thousands of hydrauliccrane booms later, Link-Belt’s exclusive,patented design is unchanged, state-of-the-art — before its time; providingsuperior capacities, tip heights andreliability.

It is true testimony to Link-Belt’sengineering design achievement that thisdesign concept is being imitated today foroptimum performance.

Attachment Flexibility• Full power, fully synchronized 35' 6" – 110'

(10.82 – 33.53 m) four-section boom.• Stowable, 34' (10.36 m) offsettable (1°, 15°, or 30°

offset), one piece lattice type fly with lugs to allowaddition of second section.

• Stowable, 34' – 56' (10.36 m – 17.07 m) offsettable(1°, 15°, or 30° offset) 2-piece, double swing-around,lattice type fly.

Embossed SidewallStiffeners Increasessidewall stiffness.

Sidewall DesignConcept Not onlydo the embossmentsincrease sidewallstiffness, but becauseof their placementthey naturallytransfer stressesuniformly to the highstrength angle chords(corners) — a conceptderived fromLink-Belt latticeboomtechnology.

Boom Wear Shoes Boomwear shoes are replaceablewithout boom disassemblyand utilize simple fast exter-nal adjusters.

NO WELDS IN HIGH STRESS CORNERS

Added Value Attachment Features• Fast, Easy, Fly Pinning The fly pinning tool helps eliminate

the age old problem of difficult fly pin alignment and pininstallation.

• Quick Reeve Head Machinery for fast, easy parts of linechange.

• Hammerhead Boom Nose Allows the operator to work athigh boom angles without fouling wire rope.

• Deflector Rollers Rollers prevent premature wire ropewear when working at low boom angles.

• Lightweight Nylon Head Sheaves Reduce overall machineweight and increases lift capacities.

• Available Auxiliary Lifting Sheave Can be used for quicklifts with one or two parts of line when the boom headhas multiple reeving. And it does not have to be removedwhen fly is erected in working position.

Patented Design

THE ORIGINAL EMBOSSED BOOM STIFFENER

Litho in U.S.A. 8/01 #5321 (Supersedes #5310)

SpecificationsTelescopic Boom Truck Crane

HTC–8650 50–ton (45.36 metric tons)

Not To Scale

General Dimensions feet meters

Turning radius – wall to wall 45’ 10” 13.97Turning radius – curb to curb 38’ 10” 11.84Ground clearance 13.25” 0.34Tailswing 13’ 9.25” 4.20

7’ 9” (2.36 m)Fully Retracted

9’ 9.25” (2.98 m)Fully Retracted

14’ 1.75” (4.31 m)Intermediate Extended

16’ 1.75” (4.92 m)Intermediate Extended

20’ 6” (6.25 m)Fully Extended

22’ 6” (6.86 m)Fully Extended

Ground Level WithCrane On Outriggers

11.5”(0.29 m)

9” (0.23 m)20”

(0.52 m)

Deck Height4’ 7” (1.40 m)

1’ 2.5”(0.37 m)

��

Link–Belt

��

��

��

��

��

��

��

��

� ��

��

��

��

��

� ��

� ��

��

��

��

��

��

��

��

�� !"�!��

#

��

��

HTC–8650

8

Link–Belt

��

$�$HTC–8650

Upper Structure� BoomPatented Design� Boom side plates have diamond shaped

impressions for superior strength to weightratio and 100,000 p.s.i. (689.5 MPa) steelangle chords for lateral stiffness.

� Boom telescope sections are supported bytop, bottom and adjustable side wearshoes to prevent metal to metal contact.

Boom� 35.5’ – 110’ (10.82 – 33.53 m) four–section

full–power boom� Two mode boom extension� The basic mode is the full power, synchro-

nized mode of telescoping all sections pro-portionally to 110’ (33.53 m).

� The exclusive “A–max” mode (or mode‘A’) extends only the inner mid section to60.3’ (18.38 m) offering increased capaci-ties for in–close, maximum capacity picks.

� Mechanical Boom Angle IndicatorBoom Head� Four 16.5” (0.42 m) root diameter nylon

sheaves to handle up to eight parts of wirerope.

� Easily removable wire rope guards� Rope dead end lugs provided on each side

of boom head.� Boom head designed for quick reeve of

hook block.� Fifth head sheave is optional

Boom Elevation� Two Link–Belt designed hydraulic cylin-

ders with holding valves and bushings ineach end.

� Hand control for controlling boom elevationfrom –3° to +78°.

Optional Auxiliary Lifting Sheave� Single 16.5” (0.42 m) root diameter nylon

sheave with removable wire rope guard,mounted to boom.

� Use with one or two parts of line off theoptional front winch.

� Does not affect erection of fly or use ofmain head sheaves for multiple reeving.

Optional� 40–ton (36.3 mt) quick–reeve hook block� 60–ton (54.43 mt) quick–reeve hook block� 70–ton (63.30 mt) quick–reeve hook block� 8.5–ton (7.71 mt) hook ball� Boom floodlight

� FlyOptional� 34’ (10.36 m) one–piece lattice fly, stow-

able, offsettable to 2°, 20° and 40°� 34’ – 56’ (10.36 – 17.07 m) two–piece (bi-

fold) lattice fly, stowable, offsettable to 2°,20° and 40°

� Cab and ControlsEnvironmental Ultra–Cab�� Laminated fibrous composite material; iso-

lated from sound with acoustical fabric insulation.

� Windows are tinted and tempered safetyglass

� Sliding rear and right side windows andswing–up roof window for maximum visibil-ity and ventilation.

� Slide–by–door opens to 3’ (0.91 m) width.� Six–way adjustable seat, with seat belt, for

maximum operator comfort.� Hand held outrigger controls and sight

level bubble located in cab.� Top hatch window wiper � Circulating fan� Audible swing alarm � Warning horn� Fire extinguisher � Cup holder� Sun screen � Backup alarm� Electric windshield wiper � Hand throttle� Windshield washer � Mirrors� Cab work lights � Defroster fan� Pull–out Cabwalk�

Optional� Amber strobe light � RCL light bar� Third wrap indicator � Air conditioning� Amber rotating beacon� Diesel or hydraulic heater

ControlsHydraulic controls (joystick type) for:� Swing � Main winch� Optional auxiliary winch � Boom hoistFoot controls for:� Boom telescope� Swing brake� Engine throttle

Optional� Auxiliary winch� Single axis controls

Cab InstrumentationCornerpost–mounted gauges for:� Hydraulic oil temperature� Audio/Visual warning system� Check and stop engine indicator lights� Tachometer � Oil pressure� Voltmeter � Fuel� Water temperature

� Rated Capacity Limiter� Microguard 434 Graphic audio–visual

warning system built into dash with anti–two block and function limiters.

Operating data available includes:� Machine configuration.� Boom length � Boom angle� Head height � Radius of load� Allowed load � Actual load� % of allowed load

Presettable alarms include:� Maximum and minimum boom angles� Maximum tip height� Maximum boom length� Swing left/right positions� Operator defined area alarm is standard� Anti–two block weight designed for quick

reeve of hookblockOptional� Internal RCL light bar: Visually informs

operator when crane is approaching maxi-mum load capacity with a series of green,yellow and red lights.

� External RCL light bar: Visually informsground crew when crane is approachingmaximum load capacity kickouts and pre-settable alarms with a series of threelights; green, yellow and red.

� Swing� Bi–directional hydraulic swing motor

mounted to a planetary reducer for 360°continuous smooth swing at 2.2 r.p.m.

� Swing park brake – 360°, electric overhydraulic (spring applied, hydraulic re-leased) multi–disc brake mounted on thespeed reducer. Operated by toggle switchin overhead control console.

� Swing brake – 360°, foot operated, hy-draulic applied disc brake mounted on thespeed reducer.

� Swing lock – Standard; two position travellock (pin device) operated from the opera-tor’s cab.

� Counterweight� Standard – Bolted to upper structureframe. 11,000 lbs. (4 990 kg) three piecedesign. Consist of one 5,000 lbs. (2 268kg) piece bolted to upper structure and two3,000 lbs. (1 361 kg) pieces pinned tostandard counterweight.� Two counterweight sections can behydraulically lowered on, and pinned tocarrier deck to balance axle loadings fortravel.

� Optional� 360� swing lock. Meets New York City

requirements� 6,000 lbs. (2 722 kg) counterweight

� Hydraulic SystemMain Pump� One gear pump with a total of four sec-

tions� Combined pump capacity of 176 gpm (666

lpm)� Powered by carrier engine with pump dis-

connect� Rocker switch controlled, air applied pump

disconnect engaged / disengaged fromcarrier cab.

� Maximum system operating pressure is3,000 psi (20 685 kPa).

� O–ring face seals technology usedthroughout with hydraulic oil cooler stan-dard.

Pilot Pressure / Counterweight RemovalPump� Pressure compensated piston pump

powered by carrier engine. Max pump op-erating pressure is 1,500 psi (10 342 kPa).

Steering / Fifth Outrigger Pump� Single gear type pump, 8 gpm (30 lpm).

Powered by carrier engine through frontgear housing.

� Maximum pump operating pressure is2,000 psi (13 790 kPa).

Reservoir� 169 gallon (639.7 L) capacity. One diffuser

for deaeration.

HTC–8650–3–

Filtration� One 10–micron filter located inside hy-

draulic reservoir.� Accessible for easy replacement

Control valves� Six separate pilot operated control valves

allow simultaneous operation of all cranefunctions.

� Load Hoist SystemStandard� 2M main winch with grooved lagging

� Two–speed motor and automatic brake� Power up/down mode of operation� Bi–directional gear–type hydraulic motor

driven through planetary reduction unit forpositive control under all load conditions.

� Asynchronous parallel double crossovergrooved drums minimize rope harmonicmotion.

� Pressure compensated winch circuit pro-vides balanced oil flow to both winches forsmooth, simultaneous operation.

� Rotation resistant wire rope� Drum rotation indicators

Line Pulls and Speeds� Maximum available line pull 16,407 lbs.

(7 442 kg) and maximum line speed of 463f.p.m. (141 m/min) on 16” (0.41 m) rootdiameter grooved drum.

Optional� 2M auxiliary winch with two–speed motor,

automatic brake, and winch function lock-out. Power up/down modes.

� Third wrap indicators

Carrier� Type� 8’ 6” (2.59 m) wide, 231” (5.87 m) wheel-

base. 8 x 4 drive – standard.Frame� 100,000 p.s.i. (689.5 MPa) steel, double

walled construction with integral 100,000p.s.i. steel outrigger boxes.

Optional� Carrier mounted storage boxes� Pintle hook� Electric and air connections for trailers and

boom dollies

� AxlesFront� Single, 83.72” (2.13 m) track

Rear� Tandem, 72.8” (1.85 m) track. 6.17 to 1.0

ratio with interaxle differential with lockout.

� SuspensionFront axle� Leaf spring suspension

Rear axle� Air–ride, bogie beam type, suspension.

� WheelsStandard� Hub piloted steel disc

Optional� Hub piloted aluminum disc� Spare tire and wheel assemblies

� TiresStandard Front� 425/65R22.5 (Load range ”L”) single tube-

less radials

Standard Rear� 12R22.5 (Load range ”H”) dual tubeless

radialsOptional� 445/65R22.5 (Load Range “L”) Single

tubeless radials front 12R22.5 (Load range“H”) dual tubeless radials rear – mountedon steel disc wheels front/rear.

� BrakesService� Full air brakes on all wheel ends with auto-

matic slack adjustors. Dual circuit withmodulated emergency brakes.

� Front – 16.5 x 6 S–Cam brakes� Rear – 16.5 x 7 S–Cam brakes

Parking/Emergency� One spring set, air released chamber per

rear axle end.� Parking brake applied with valve mounted

on carrier dash.� Emergency brakes apply automatically

when air drops below 60 psi (413.7 kPa) inboth systems.

� Steering� Sheppard rack and pinion design

� TransmissionStandard� Eaton RTO 11909ALL; 11 speeds forward,

3 reverse with Series 50 engine.Optional� Eaton RTO–14909ALL; 11 speeds forward,

3 reverse with Series 60 engine.

� Electrical� Two 12–volt batteries provide 12–volt

starting. 130–amp alternator� 2,800 cold cranking amps available� 12–volt operating system

Lights� Four dual beam sealed headlights� Front, side, and rear directional signals� Stop, tail and license plate lights� Rear and side clearance lights� Hazard warning lights

� Outriggers� Three position operation capability.� Four hydraulic, telescoping beam and jack

outriggers.� Vertical jack cylinders equipped with

integral holding valve.� Beams extend to 20’ 6” (6.25 m) center-

line–to–centerline and retract to within 8’ 6” (2.59 m) overall width.

� Equipped with stowable, lightweight 24” (0.61 m) diameter aluminum floats.

� Standard fifth outrigger, 14 3/4” (0.37 m)self storing steel pad is operable fromground or operator’s cab.

� Hand–held controls and sight level bubblelocated in operators cab and on carrier deck.

Confined Area Lifting Capacities(CALC�) System� The crane is operational in one of the three

outriggers positions and operational in con-fined areas in two positions (intermediateand full retraction).

The three outrigger positions are:� Full extension – 20’ 6” (6.25 m)� Intermediate position – 14’ 1.75” (4.31 m)� Full retraction – 7’ 9” (2.36 m)� Capacities are available with the outrigger

beams in the intermediate and full retrac-tion positions.

� When the outrigger position levers (located on the outrigger beams) are engaged, the operator can set the crane inthe intermediate or full retraction outriggerposition without having to leave the cab.

� Carrier Cab� One–man cab of laminated fibrous com-

posite material acoustical insulation withcloth covering. Equipped with:

� Air–ride, six–way adjustable operator’s seat.� Four–way adjustable tilting and lockable

steering wheel.� Door and windows locks� Left–hand and right–hand rear view mirrors.� Sliding right–hand and rear tinted windows.� Roll up/down left–hand tinted window.� Desiccant–type air dryer� Steps to upper, lower cab and rear carrier� 110–volt electric engine block heater� Back–up warning alarm� Tow hooks and shackles� Aluminum fenders with ground control

outriggers.� Electric windshield wiper and washer� Travel lights � Horn� Fire extinguisher � Ashtray� 36,000 BTU heater � Defroster� Dome light � Cruise control� Mud flaps

Optional� Air conditioning� Amber strobe light� Rotating beacon

Cab instrumentation� Illuminated instrument panel speedometer.� Tachometer � Hourmeter� Fuel gauge � Fuses� Oil pressure gauge � Odometer� Turn signal indicator � Voltmeter� Water temperature gauge� Front and rear air pressure gauges� Audio/visual warning system� Automotive type ignition

$�$HTC–8650

� Carrier Speeds (Manual Transmission – Standard tires)

GearHigh Low Deep

reduction Hi rev. Lo rev. Deepreduction

Deep reduction@ 700 rpm

Deep reduction@ 700 rpmGear

8 7 6 5 4 3 2 1 Low LL2 LL1 Rev Rev Rev. LL1 Low

Ratio 0.73 1.00 1.38 1.95 2.77 3.79 5.23 7.41 16.30 11.85 26.08 3.43 13.03 20.85 26.08 20.85mph 58.20 42.49 30.79 21.79 15.34 11.21 8.12 5.73 2.61 3.59 1.63 12.13 3.19 1.99 0.55 0.66Speed

km/hr. 93.65 68.36 49.54 35.06 24.68 18.04 13.07 9.23 4.19 5.77 2.62 19.52 5.13 3.20 0.88 1.06

� EngineEngine – standard Detroit Diesel, Series 50 8.5 L Engine – optional Detroit Diesel, Series 60 12.7 L

Cylinders – cycleBoreStrokeDisplacementMaximum brake hp.Peak torqueElectric systemFuel capacityAlternatorCrankcase capacity

6 / 45.12” (0.13 m) 6.30” (0.16 m) 519 cu. in. (8 506 cm3) 315 @ 1,800 rpm; 315 @ 2,100 rpm 1,150 ft. lbs. (1 560 J) @ 1,200 rpm 12–volt neg. ground / 12–volt starting 100 gallons (378.5 L) 12 volt, 130 amps 22 qts. (21 L)

Cylinders – cycleBoreStrokeDisplacementMaximum brake hp.Peak torqueElectric systemFuel capacityAlternatorCrankcase capacity

6 / 45.12” (0.13 m) 6.30” (0.16 m) 778 cu. in. (12 751 cm3) 365 @ 1,800 rpm; 350 @ 2,100 rpm 1,350 ft. lbs. (1 831 J) @ 1,200 rpm 12–volt neg. ground / 12 volt starting 100 gallons (378.5 L) 12 volt, 130 amps 32 qts. (30 L)

� Engine brake – standard � Ether injection starting package – optional

� Axle LoadsBase machine with standard 35.5’ – 110’ (10.82 – 33.53 m) four–section boom,

�Upper Facing Front

2M main winch with 2–speed hoisting and power up/down, 600’ (182.88 m), G.V.W. �Front Axle Rear Axle

3/4” (19 mm) wire rope, 8 x 4, 8.5’ (2.59 m) carrier with Detroit Diesel Series 50lbs. kg. lbs. kg. lbs. kg.8.5 L engine, 100 gal. (378.5 L) fuel, steel fenders and 5,000 lb. (2 268 kg.)

counterweight. 75,008 34 024 32,004 14 517 43,004 19 507Aluminum fenders with ground control outriggers –268 –121 –99 –45 –169 –76Tow shackles – front and rearCarrier aluminum storage box

5657

2526

3216

157

2441

1019Carrier aluminum storage box

Detroit Diesel Series 50 engine S/A with jake brake5750

2623

1651

723

41–1

19–0.5

Detroit Diesel Series 60 engine S/A with jake brakeEngine block heater – propane

45983

20838

514105

23348

–55–22

–25–10

Ether injectionTire and steel disc wheels (445/65R22.5 fronts – 12R22.5 rears)

6255

3116

6126

357

0129

059Tire and steel disc wheels (445/65R22.5 fronts – 12R22.5 rears)

Tire and steel aluminum wheels (425/65R22.5 fronts – 12R22.5 rears)255

–425116

–193126

–22257

–101129

–20359

–92Air conditioning – Carrier cabPintle hook

12425

5611

158–10

71–5

–3435

–1516Pintle hook

Electrical and air electrical hook–ups for dolly or trailer257

113

–100

–50

357

163

Driver in carrier cabCab heater assembly w/fuel (diesel)

20049

9122

2529

1144

–5240

–2318

Cab heater assembly (hydraulic)Cab air conditioning

129264

59120

21

10.5

127263

57119Cab air conditioning

Counterweight removal system264176

12079

1–86

0.5–39

263262

119118

One slab of counterweight on upperTwo slabs of counterweight on upper

3,0006,000

1 3612 722

–1,572–3,143

–713–1 425

4,5729,143

2 0744 147Two slabs of counterweight on upper

Rear winch roller6,000

932 722

42–3,143

–44–1 425

–209,143

1374 147

62Winch with two speeds and 600’ (182.88 m) of wire ropeFront winch roller

71293

32342

–197–31

–89–14

909124

41256Front winch roller

Remove 600’ (182.88 m) of rope from rear winch93

–66042

–299–31279

–14127

124–939

56–426

Remove 600’ (182.88 m) of rope from front winchBoom float kit

–66056

–29925

18514

846

–84542

–38319

Add fly brackets to boom base section fly optionsAdd 34’ (10.36 m) offsettable fly w/ATB weight (stowed)

1601,478

73670

1411,456

64660

1922

910Add 34’ (10.36 m) offsettable fly w/ATB weight (stowed)

Add 34’ – 56’ (10.36 – 17.07 m) offsettable fly w/ATB weight (stowed)1,4782,134

670968

1,4561,857

660842

22277

10126

Add floodlight to front of boom base sectionAdd 40–ton (36.43 mt) hookblock stowed behind bumper (4–sheaves)

10720

5327

161,201

7545

–6–481

–2–218Add 40–ton (36.43 mt) hookblock stowed behind bumper (4–sheaves)

Add 50–ton (45.36 mt) hookblock stowed behind bumper (5–sheaves)720

1,109327503

1,2011,850

545839

–481–741

–218–336

Add hookball to front bumperAdd auxiliary arm w/ATB switch to boomhead

36095

16343

600200

27291

–240–105

–109–48

G.V.W. Front Axle Rear AxleTransfer one slab of counterweight to carrier deckTransfer two slabs of counterweight to carrier deck

74,61374,613

33 84433 844

3,9517,902

1 7923 584

–3,951–7,902

–1 792–3 584

� Adjust gross vehicle weight & axle loading according to component weight. Note: All weights are � 3%

Axle Max. Load @ 65 mph. (105 km/h)Front

Front

Rear

45,400 lbs. (20 593 kg) – aluminum disc wheels with 425/65R22.5 tires

46,400 lbs. (21 047 kg) – steel disc wheels with 445/65R22.5 tires

50,350 lbs. (22 838 kg.) – aluminum or steel disc wheels

Link–Belt Construction Equipment Company Lexington, Kentucky www.linkbelt.com�Link–Belt is a registered trademark. Copyright 2001. All rights reserved. We are constantly improving our products and therefore reserve the right to change designs and specifications.

Litho in U.S.A. 12/00 – 1 – #6289 (Supersedes #6234)

Lifting CapacitiesTelescopic Hydraulic Truck Crane

HTC–8650 50–ton (45.36 metric ton)

Boom and fly capacities for this machine are listed by the following sections:

Fully Extended Outriggers� Working Range Diagram (11,000 lbs. Counterweight)� 35.5 to 60.3 ft. (10.82 – 18.38 m) main boom capacities, A–max mode� 35.5 to 110 ft. (10.82 – 33.53 m) main boom capacities, Basic Mode “B”� 34 (10.36 m) ft. offset fly capacities, Basic Mode “B”� 34 to 56 ft. (10.36 – 33.53 m) two–piece offset fly capacities, Basic mode “B”

Link–Belt��

��

CAUTION: This material is supplied for reference use only. Operator must refer toin–cab Crane Rating Manual to determine allowable machine lifting capacities andoperating procedures.

��

��

��

��

OPERATING INSTRUCTIONS��

1 . Rated lifting capacities in pounds as shown on lift charts pertainto this crane as originally manufactured and normallyequipped. Modifications to the crane or use of optionalequipment other than that specified can result in a reduction ofcapacity.

2 . Construction equipment can be dangerous if improperlyoperated or maintained. Operation and maintenance of thiscrane must be in compliance with the information in theOperator’s, Parts, and Safety Manuals supplied with this crane.If these manuals are missing, order replacements through thedistributor.

3 . The operator and other personnel associated with this craneshall read and fully understand the latest applicable AmericanNational Standards ASME B30.5 safety standards for cranes.

4 . The rated lifting capacities are based on crane standing levelon firm supporting surface.

��

1 . The crane shall be leveled on a firm supporting surface.Depending on the nature of the supporting surface, it may benecessary to have structural supports under the outriggerpontoons or tires to spread the load to a larger bearing surface.

2 . When making lifts on outriggers, all tires must be free ofsupporting surface. All outrigger beams must be extended tothe same length; fully retracted, intermediate extended, or fullyextended. The front bumper outrigger must be properlyextended.

3 . When operating on fully retracted outriggers, do not exceed70� maximum boom angle with 11,000 lb. counterweight. Lossof backward stability will occur causing a backward tippingcondition.

4 . When making lifts on tires, they must be inflated to therecommended pressure. (See Operation note 20 and TireInflation.)

5 . Before swinging boom to over side position on tires, or on fullyretracted outriggers where capacities are not published, boomsections must be fully retracted and 45� boom angle main-tained.

6 . For required parts of line, see Wire Rope Capacity and WinchPerformance.

7 . When installing or removing counterweights, crane must be onfully extended outriggers and boom fully retracted. Do notexceed a 30 ft. radius when moving counterweights.

8 . Before setting up on intermediate outriggers, retractedoutriggers, or tires, refer to Working Range Diagrams and ratedlifting capacities to determine allowable crane configurations.

��

1 . Rated lifting capacities at rated radius shall not be exceeded.Do not tip the crane to determine allowable loads. For concretebucket operation, weight of bucket and load shall not exceed80% of rated lifting capacities. For clamshell bucket operation,weight of bucket and bucket contents is restricted to amaximum weight of 7,000 pounds or 80% of rated liftingcapacity, whichever is less. For magnet operation, weight ofmagnet and load is restricted to a maximum weight of 7,000pounds or 80% of rated lifting capacity, whichever is less. Forclamshell and magnet operation, maximum boom length isrestricted to 55 ft. and the boom angle is restricted to aminimum of 35 degrees. Lifts with either fly erected isprohibited for both clam and magnet operation.

2 . Rated lifting capacities shown on fully extended outriggers donot exceed 85% of the tipping loads. Rated lifting capacitiesshown on intermediate extended or fully retracted outriggersare determined by the formula, rated load = (tipping load – 0.1 Xload factor)/1.25. Rated lifting capacities shown on tires do notexceed 75% of the tipping loads. Tipping loads are determinedby SAE crane stability test code J–765.

3 . Rated lifting capacities in the shaded areas above the boldlines, are based on structural strength or hydraulic limitationsand have been tested to meet minimum requirements of SAEJ–1063 cantilevered boom crane structures– method of test.The rated lifting capacities below the bold lines are based onstability ratings. Some capacities are limited by a maximumobtainable 78� boom angle.

4 . Rated lifting capacities include the weight of the hook block,hook ball, slings, bucket, magnet, and auxiliary lifting devices.Their weights must be subtracted from the listed rated capacityto obtain the net load which can be lifted. Rated liftingcapacities include the deduct for either fly stowed on the baseof the boom. For deducts of either fly erected, but not used, seeCapacity Deductions For Auxiliary Load Handling Equipment.

5 . Rated lifting capacities are based on freely suspended loads.No attempt shall be made to move a load horizontally on theground in any direction.

6 . Rated lifting capacities are for lift crane service only.7 . Do not operate at radii or boom lengths (minimum or maximum)

where capacities are not listed. At these positions, the cranecan tip or cause boom failure.

8 . The maximum loads which can be telescoped are not definablebecause of variation in loadings and crane maintenance, but itis permissible to attempt retraction and extension within thelimits of the applicable load rating chart.

9 . For main boom capacities when either boom length or radius orboth are between values listed, proceed as follows:a. For boom lengths not listed, use rating for next longer

boom length or next shorter boom length, whichever issmaller.

b. For load radii not listed, use rating for next larger radius.

��

10 . The user shall operate at reduced ratings to allow for adversejob conditions, such as: soft or uneven ground, out of levelconditions, wind, side loads, pendulum action, jerking orsudden stopping of loads, hazardous conditions, experience ofpersonnel, traveling with loads, electrical wires, etc. Side loadon boom or fly is dangerous and shall be avoided.

11 . Rated lifting capacities do not account for wind on suspendedload or boom. Rated capacities and boom length shall beappropriately reduced as wind velocity approaches or exceeds20 mph.

12 . When making lifts with auxiliary head machinery, the effectivelength of the boom increases by 2 ft.

13 . Power sections of boom must be extended in accordance withboom mode “A” or “B”. In boom mode “B” all power sectionsmust be extended or retracted equally.

14 . The least stable rated working area depends on theconfiguration of the crane set up.

15 . Rated lifting capacities are based on correct reeving.Deduction must be made for excessive reeving. Any reevingover minimum required (see Wire Rope Capacity) isconsidered excessive and must be accounted for when makinglifts. Use working range diagram to estimate the extra feet ofrope then deduct 1 lb. for each extra foot of wire rope beforeattempting to lift a load.

16 . The loaded boom angle combined with the boom length giveonly an approximation of the operating radius. The boomangle, before loading, should be greater to account fordeflection. For main boom capacities, the loaded boom angleis for reference only. For fly capacities, the loaded radius is forreference only.

17 . For fly capacities with main boom length less than 110 ft. andgreater than 85 ft., the rated capacities are determined by theboom angle using the 110 ft. boom and fly chart. For angles notshown use the next lower boom angle to determine the ratedcapacity.

18 . For fly capacities with main boom length less than 85 ft., therated capacities are determined by the boom angle only usingthe 85 ft. boom and fly chart. For angles not shown, use thenext lower boom angle to determine the rated capacity.

19 . The 35.5 ft. boom length rated lifting capacities are based onboom fully retracted. If the boom is not fully retracted, do notexceed capacities shown for the 45 ft. boom length.

20 . Rated lifting capacities on tires depend on tire capacity,condition of tires, and tire air pressure. On tire capacitiesrequire lifting from main boom head only on a smooth and levelsurface. Pick and carry operations are restricted to maximumspeed of 1 mph . The boom must be centered over the rear ofthe crane with two position travel swing lock engaged and theload must be restrained from swinging. For correct tirepressure, see “Tire Inflation”.

21 . When operating with 6,000 lb. counterweight removed (two,3,000 lb. counterweights), use the rated capacities for 5,000lbs. counterweight.

��

1 . Load Radius: Horizontal distance from a projection of the axisof rotation to the supporting surface before loading to the centerof the vertical hoist line or tackle with load applied.

2 . Loaded Boom Angle: The angle between the boom basesection and horizontal with freely suspended load at the ratedradius.

3 . Working Area: Area measured in a circular arc about the centerline of rotation as shown on the Working Area Diagram.

4 . Freely Suspended Load: Load hanging free with no directexternal force applied except by the hoist line.

5 . Side Load: Horizontal side force applied to the lifted load eitheron the ground or in the air.

6 . No Load Stability Limit: The radius or boom angle beyondwhich it is not permitted to position the boom because the cranecan overturn without any load on the hook.

7 . Load Factor: Load applied at the boom tip which gives thesame moment effect as the boom mass.

��

BOOM EXTENSION

Boom Mode “A”

Boom Mode “B”

Only inner mid sectiontelescopes

Inner mid, outer mid and tip sections telescope simultaneously.

Inner Mid Section298” Stroke

Base Section

Inner MidSection

298” StrokeBase Section

Outer MidSection

298” Stroke

Tip Section298” Stroke

��

��

��

��

Boom Length (ft.)

Boom Length (ft.)

��

��

��

��

��

��

��

��

��

TIRE INFLATIONTire Size Operation Tire Pressure (psi)

12 R 22.5 1 MPHStationary

120120

295/80 R 22.5 1 MPHStationary

110110

PONTOON LOADINGS

Maximum Pontoon Load:Maximum Pontoon

Ground Bearing Pressure:97,400 lbs. 215 psi

CAPACITY DEDUCTIONS FOR AUXILIARY LOAD HANDLING EQUIPMENT

Load Handling Equipment: (lbs.)Auxiliary Head Attached 100

40–ton quick reeve 4 sheave hook block (see hook block for actual weight) 720

60–ton quick reeve 4 sheave hook block (see hook block for actual weight) 1,100

70–ton quick reeve 5 sheave hook block (see hook block for actual weight) 1,400

8.5–ton hook ball (see hook ball for actual weight) 360

Lifting From Main Boom With: (lbs.)

34 ft. or 56 ft. fly stowed on base (see operation note 4) 0

34 ft. offset fly erected but not used 4,200

56 ft. offset fly erected but not used 7,300

Lifting From 34 ft. Offset Fly With:22 ft. fly tip erected but not used PROHIBITED22 ft. fly tip stowed on 34 ft. offset fly PROHIBITED

Note: Capacity deductions are for Link–Belt supplied equipment only.

WINCH PERFORMANCEWinch Line Pulls

Two Speed WinchDrum Rope Capacity (ft.)

WireRope Low Speed High SpeedRopeLayer Available Lbs.* Available lbs.

Layer Total

1 16,407 7,793 110 110

2 15,085 7,165 119 229

3 13,959 6,631 129 358

4 12,990 6,170 138 496

5 12,147 5,770 148 644

6 N/A N/A 158 802

*Maximum lifting capacity: Type RB Rope = 12,920 Type ZB Rope = 15,600

WIRE ROPE CAPACITYMaximum Lifting Capacities Based On Wire Rope Strength

3/4” 3/4”Parts of Line

Type RB Type ZBNotes

1 12,920 15,600

2 25,840 31,200

3 38,760 46,800Capacities shown are in poundsand working loads must not ex-

4 51,680 62,400

and working loads must not ex-ceed the ratings on the capacity

5 64,600 78,000charts in the Crane Rating Manual.

6 77,520 93,600 Study Operator’s Manual for wire

7 90,440 109,200rope inspection procedures andsingle part of line applications.

8 103,360 124,800

single part of line applications.

9 116,280 140,400

10 129,200 156,000

LBCE DESCRIPTION

TYPE RB

TYPE ZB

18 X 19 Rotation Resistant – Compact Strand, HighStrength Preformed, Right Regular Lay36 X 7 Rotation Resistant – Extra Improved Plow Steel –Right Regular Lay

HYDRAULIC CIRCUIT PRESSURE SETTINGSFunction Pressure (PSI)

Front And Rear Winch 2,750Outriggers 3,000Boom Hoist 2,900Telescope 3,000Swing 1,500Steering 2,000Bumper Outrigger 650Pilot Control 500Counterweight Removal 1,500

WORKING AREAS

LongitudinalC of HTCL

Center ofRotation

Note: These Lines Determine The Limiting Position Of AnyLoad For Operation Within Working Areas Indicated.

Longitudinal C of HTCL

HTC on Tires

Center Of Rotation

HTC on Outriggers

Rear

360� Chart

Front

C Outrigger Pontoon

L

See Note

See NoteBoom Centered Over Rear

Side

Side

C BoomL

C Rear AxleL

C Front AxleL

��

WORKING RANGE DIAGRAM

65 FT. BOOM MODE “B”

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

78� MAXBOOM ANGLE

95 FT. BOOM

85 FT. BOOM

75 FT. BOOM

45 FT. BOOM

35.5 FT. BOOMMODES “A” & “B”

34 FT. FLY +110 FT. BOOM

�� !"#$%� !&#'(�) $*�!+#(�$)� $"!"#$%�#%�)��"

��#,

-"�#%

�)��"�!.$/��,

$'%&

Working Range DiagramOn Fully Extended Outriggers

�$��$"��$0� ��-��$$*��1$0��-��#%#*'*��$$*�%,1��$ ��$��$!&��"!.#1#"2�(��-$0%� %��-��#)"

�-! "(��$ ��-��$$*��%,"-(��#/�%��$((��)��"!.#1#"2�#11��33' ��!'(#%,��#��#%,��$%&#"#$%�

��

11,000 lbs. Counterweight

� Denotes Main Boom + 56’ Fly–Boom Mode “B”� Denotes Main Boom + 34’ Fly–Boom Mode “B”� Denotes Main Boom – Boom Mode “B”

Note: Boom and fly geometry shown are for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent radius, and boom angle change must be accounted for when applying load to hook.

10’8.5’

40� OFFSET

20� OFFSET 2� OFFSET



34 FT. FLY + 85 FT. BOOM

110 FT. BOOM MODE “B”

105 FT. BOOM

170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 ��CL

70�60�

50�

40�

30�

20�

10�

60.3 FT. BOOM MODE “A”

55 FT. BOOM

��

Note: Refer To Page 4 For “Capacity Deductions” Caused By Auxiliary Load Handling Equipment.

Rated Lifting Capacities In Pounds On Fully Extended Outriggers See Set Up Note 2.

Boom Mode “A”11,000 lbs. Counterweight

35.5 Ft. 45 Ft.

Load Loaded LoadedLoadRadius (ft)

LoadedBoom 360° Over Rear

LoadedBoom 360° Over RearAngle

(Deg.)

360 Over Rear Angle(Deg.)

360 Over Rear

10 68.5 100,000 100,000 73.5 87,100 87,100

12 65.0 96,700 96,700 71.0 87,100 87,100

15 59.5 82,500 82,500 66.5 82,100 82,100

20 49.5 64,100 64,100 59.5 63,700 63,700

25 37.5 47,300 49,500 51.5 46,500 49,200

30 20.0 32,800 37,100 42.5 32,500 37,000

35 32.0 24,000 28,000

40 15.5 18,200 21,800

Min. BoomAngle/Cap.

0 19,900 19,900 0 13,200 13,200

55 Ft. 60.3 Ft.Loaded LoadedLoad

Radius (ft)

LoadedBoom 360° Over Rear

LoadedBoom 360° OverRadius (ft)

Angle(Deg.)

360 Over RearAngle(Deg.)

360Rear

10 77.0 79,500 79,500

12 75.0 72,200 72,200 76.5 61,300 61,300

15 71.5 63,300 63,300 73.5 57,600 57,600

20 66.0 52,100 52,100 68.5 47,100 47,100

25 60.0 44,000 44,000 63.0 39,500 39,500

30 53.5 32,000 36,500 57.5 31,800 33,900

35 46.5 23,700 27,700 51.5 23,500 27,500

40 38.5 18,100 21,800 45.0 18,000 21,600

45 29.0 14,100 17,300 37.5 14,000 17,300

50 14.5 11,000 13,900 28.5 11,000 13,900

55 15.0 8,600 11,300

Min. BoomAngle/Cap.

0 8,400 8,400 0 6,500 6,500

Boom Mode “B”11,000 lbs. Counterweight


35.5 Ft. 45 Ft. 55 Ft.Load

Radius(ft)

LoadedBoomAngle(Deg.)

360° OverRear


360° OverRear


360° OverRear

10 68.5 100,000 100,000 73.0 42,000 42,000 76.5 42,000 42,000

12 65.0 96,700 96,700 70.5 42,000 42,000 74.5 42,000 42,000

15 59.5 82,500 82,500 66.5 42,000 42,000 71.5 42,000 42,000

20 49.5 64,100 64,100 59.5 42,000 42,000 66.0 42,000 42,000

25 37.5 47,300 49,500 51.5 42,000 42,000 60.0 42,000 42,000

30 20.0 32,800 37,100 42.5 34,000 38,400 53.5 34,600 38,900

35 32.0 25,500 29,300 46.5 26,000 30,000

40 15.5 19,500 23,000 38.5 20,400 23,900

45 29.0 16,200 19,400

50 14.0 13,000 15,900Min.

BoomAngle/Cap.

0 19,900 19,900 0 14,300 14,300 0 10,200 10,200

65 Ft. 75 Ft. 85 Ft.Load

Radius(ft)


360° OverRear


360° OverRear


360° OverRear

12 77.0 42,000 42,000

15 74.5 42,000 42,000 77.0 42,000 42,000

20 70.0 42,000 42,000 73.0 42,000 42,000 75.5 35,900 35,900

25 65.5 42,000 42,000 69.0 41,700 41,700 72.0 31,500 31,500

30 60.0 34,900 39,100 65.0 35,100 37,100 68.5 28,100 28,100

35 54.5 26,300 30,300 60.5 26,500 30,400 64.5 25,400 25,400

40 49.0 20,700 24,200 56.0 20,900 24,400 61.0 21,100 23,000

45 42.5 16,600 19,800 51.0 16,800 20,000 56.5 17,000 20,200

50 35.5 13,600 16,400 45.5 13,800 16,700 52.5 13,900 16,800

55 26.5 11,200 13,700 40.0 11,500 14,100 48.0 11,600 14,200

60 13.0 9,100 11,600 33.0 9,600 12,000 43.0 9,700 12,200

65 25.0 7,900 10,200 37.5 8,200 10,400

70 12.5 6,600 8,600 31.5 6,900 8,900

75 23.5 5,700 7,700

80 12.0 4,700 6,500Min.

BoomAngle/Cap

0 7,400 7,400 0 5,400 5,400 0 3,900 3,900

95 Ft. 105 Ft. 110 Ft.Load

Radius(ft)


360° OverRear


360° OverRear


360° OverRear

20 77.5 31,800 31,800

25 74.5 28,300 28,300 76.0 25,700 25,700 77.0 22,600 22,600

30 71.0 25,300 25,300 73.5 23,100 23,100 74.5 22,100 22,100

35 68.0 22,800 22,800 70.5 20,900 20,900 71.5 20,000 20,000

40 64.5 20,800 20,800 67.5 19,000 19,000 69.0 18,300 18,300

45 61.0 17,100 19,000 64.5 17,200 17,400 66.0 16,700 16,700

50 57.5 14,000 16,900 61.5 14,100 15,900 63.0 14,100 15,200

55 53.5 11,800 14,300 58.0 11,900 14,400 60.0 11,900 13,900

60 49.5 9,900 12,300 54.5 10,000 12,400 57.0 10,000 12,400

65 45.5 8,300 10,600 51.0 8,400 10,700 53.5 8,400 10,700

70 41.0 7,000 9,100 47.5 7,100 9,200 50.0 7,100 9,200

75 35.5 5,900 7,900 43.5 6,000 8,000 46.5 6,100 8,000

80 30.0 4,900 6,800 39.0 5,100 6,900 42.5 5,100 7,000

85 22.5 4,100 5,800 34.0 4,300 6,000 38.0 4,300 6,000

90 11.5 3,300 4,900 28.5 3,500 5,100 33.5 3,600 5,200

95 21.5 2,900 4,400 28.0 2,900 4,500

100 11.0 2,300 3,700 21.5 2,300 3,800

Min.BoomAngle/Cap.

0 2,700 2,700 4.5 17.0

��

20�Offset

2� Offset

34 Ft. Offset Fly

40�Offset

85 Ft. Main Boom



2� Offset 20� Offset 40� OffsetLoad

Loaded Loaded LoadedRadius LoadedBoom Angle 360�

LoadedBoom Angle 360�

LoadedBoom Angle 360�(ft) Boom Angle

(Deg.)360 Boom Angle


(Deg.)360

25 77.5 18,60030 75.0 17,00035 73.0 15,600 77.5 11,00040 70.5 14,500 75.0 10,50045 68.0 13,600 72.5 10,100 77.0 8,20050 65.0 12,700 70.0 9,600 74.5 7,90055 62.5 11,900 67.5 9,300 71.5 7,60060 60.0 11,100 64.5 8,900 69.0 7,40065 57.0 9,600 62.0 8,600 66.0 7,20070 54.0 8,300 59.0 8,200 62.5 7,00075 50.5 7,200 55.5 7,800 59.5 6,80080 47.0 6,200 52.5 6,800 56.0 6,70085 43.5 5,400 48.5 5,900 52.0 6,30090 40.0 4,700 45.0 5,100 48.0 5,60095 35.5 4,000 40.5 4,400 43.0 4,600100 31.0 3,400 35.5 3,700105 26.0 2,900 30.0 3,100110 19.0 2,400 23.0 2,600

Min.Bm.Min.Bm.Ang./Cap. 0 1,700 0 1,800 0 1,900

56 Ft. Offset Fly

20�Offset

2� Offset40�Offset

85 Ft. Main Boom



2� Offset 20� Offset 40� OffsetLoad Loaded Loaded LoadedLoad

Radius (ft)Loaded

Boom Angle 360�Loaded

Boom Angle 360�Loaded

Boom Angle 360�Boom Angle(Deg.)

360 Boom Angle(Deg.)

360 Boom Angle(Deg.)

360

35 76.5 11,10040 74.5 10,50045 72.5 9,60050 70.0 8,800 77.0 6,20055 68.0 8,100 75.0 5,90060 66.0 7,600 73.0 5,60065 63.5 7,000 70.5 5,300 77.0 4,20070 61.5 6,600 68.5 5,000 74.5 4,00075 59.0 6,200 66.0 4,800 72.0 3,90080 56.5 5,800 63.5 4,600 69.5 3,80085 54.0 5,500 61.0 4,400 66.5 3,70090 51.5 5,200 58.5 4,200 64.0 3,60095 48.5 4,600 55.5 4,000 61.0 3,500

100 45.5 4,000 52.5 3,900 57.5 3,500105 42.5 3,500 49.5 3,800 54.5 3,400110 39.0 3,000 46.0 3,500 50.5 3,400115 35.5 2,600 42.5 3,100 46.5 3,300120 31.5 2,200 38.0 2,600 41.0 2,800125 27.5 1,900 33.5 2,200130 22.0 1,600 27.5 1,800

Do Not Lower 56 Ft. Offset Fly In Working Position Below 20.5� Main Boom Angle Unless MainBoom Length Is 80 Ft. Or Less, Since Loss Of Stability Will Occur Causing A Tipping Condition.

��

20�Offset

2� Offset

34 Ft. Offset Fly

40�Offset

110 Ft. Main Boom



2� Offset 20� Offset 40� OffsetLoad Loaded Loaded Loaded

Radius(ft)

LoadedBoom 360�

LoadedBoom 360�

LoadedBoom 360�(ft) Angle

(Deg.)

360 Angle(Deg.)

360 Angle(Deg.)

360

35 76.5 10,500

40 74.5 10,500

45 72.5 10,500 77.0 9,500

50 70.5 9,800 75.0 8,700

55 68.5 8,900 72.5 8,000 76.5 7,400

60 66.5 8,200 70.5 7,400 74.0 6,900

65 64.0 7,500 68.5 6,800 72.0 6,400

70 62.0 6,900 66.0 6,400 69.5 6,000

75 59.5 6,400 63.5 6,000 67.0 5,600

80 57.0 5,900 61.5 5,600 64.5 5,300

85 54.5 5,100 59.0 5,200 62.0 5,000

90 52.0 4,400 56.5 4,900 59.5 4,700

95 49.0 3,700 53.5 4,200 56.5 4,500

100 46.5 3,200 50.5 3,600 53.5 3,900

105 43.5 2,600 47.5 3,000 50.0 3,300

110 40.0 2,200 44.0 2,500 46.5 2,800

115 40.5 2,100 42.5 2,200

120 37.0 1,700

Do Not Lower 34 Ft. Offset Fly In Working Position Below 36� Main Boom Angle Unless MainBoom Length Is 88 Ft. Or Less, Since Loss Of Stability Will Occur Causing A Tipping Condition.

��

110 Ft. Main Boom

20�Offset

2� Offset40�Offset

56 Ft. Offset Fly



2� Offset 20� Offset 40� OffsetLoad

Loaded Loaded Loaded Radius(ft)

Loaded Boom Angle 360�

Loaded Boom Angle 360�

Loaded Boom Angle 360�(ft) Boom Angle



(Deg.)360

40 77.0 6,900

45 75.5 6,900

50 74.0 6,900

55 72.5 6,900

60 70.5 6,400 77.0 5,600

65 69.0 5,900 75.0 5,200

70 67.0 5,400 73.0 4,800

75 65.0 5,000 71.5 4,500 76.5 4,000

80 63.0 4,600 69.5 4,200 74.5 3,800

85 61.0 4,300 67.5 3,900 72.5 3,600

90 59.0 4,000 65.5 3,600 70.5 3,300

95 57.0 3,700 63.0 3,400 68.0 3,100

100 55.0 3,500 61.0 3,200 66.0 3,000

105 53.0 3,100 59.0 3,000 63.5 2,800

110 50.5 2,600 56.5 2,800 61.0 2,600

115 48.0 2,200 54.0 2,700 58.5 2,500

120 51.5 2,400 55.5 2,400

125 48.5 2,000 52.5 2,300

130 49.5 1,900

Do Not Lower 56 Ft. Offset Fly In Working Position Below 45.5� Main Boom Angle Unless MainBoom Length Is 80 Ft. Or Less, Since Loss Of Stability Will Occur Causing A Tipping Condition.

��

��

�#%4��1"��$%(" '3"#$%��5'#�*�%"��$*�!%2 �� !"# $$$ %��"&�%� !�'� Link–Belt is a registered trademark. Copyright 2000. All rights reserved. We are constantly improving our products and therefore reserve the right to change designs and specifications.

not for crane operations

For S

ales

Use

Onl

y!

��

HTC – 8650 Series IICRANE RATING MANUAL

4 – SECTION POWER BOOM

SERIAL NUMBER _________________________

For Replacement, Order Part Number: L8P0001(022603)

� Link–Belt is a registered trademark.


For S

ales

Use

Onl

y!

��

Table Of ContentsPage Contents3 Operating Instructions5 General Dimensions5 Tire Inflation5 Pontoon Loadings6 Boom Mode “A” & “B”6 Wind Speed Restrictions7 Winch Performance7 Wire Rope Capacity7 Hydraulic Circuit Pressure Settings8 Working Areas8 Capacity Deductions9 Working Range Diagram10 Allowable Crane Configuration10 Patent Information

Fully Extended Outrigger CapacitiesTab 111 – 18 Lifting Capacities, 4,300# CounterweightTab 219 – 26 Lifting Capacities, 7,900# CounterweightTab 327 – 34 Lifting Capacities, 11,500# CounterweightTab 435 – 42 Lifting Capacities, 15,100# Counterweight

Intermediate Extended Outrigger CapacitiesTab 543 – 46 Lifting Capacities, 4,300# CounterweightTab 647 – 50 Lifting Capacities, 7,900# CounterweightTab 751 – 54 Lifting Capacities, 11,500# CounterweightTab 855 – 60 Lifting Capacities, 15,100# Counterweight

Retracted Outrigger CapacitiesTab 961 – 62 Lifting Capacities, 7,900# CounterweightTab 1063 – 64 Lifting Capacities, 11,500# CounterweightTab 1165 – 66 Lifting Capacities, 15,100# Counterweight

On Tire CapacitiesTab 1267 – 70 Lifting Capacities, 4,300# CounterweightTab 1371 – 74 Lifting Capacities, 7,900# CounterweightTab 1475 – 78 Lifting Capacities, 11,500# CounterweightTab 1579 – 82 Lifting Capacities, 15,100# Counterweight


For S

ales

Use

Onl

y!

��

��

��

��

��

OPERATING INSTRUCTIONS�� !��"�#��

�"�� "�� $%��!��!�� %��$� �&!� ��'�� "�� !�� &!� %��"��"��"�� !��!�� $�

�� !�� &!� %�� (�� !�� % �� $� � �� %�� ) �� %�� "�� %!�� (�� % �� #��"� �"�� %�� "�) ��*�+��+��$�'��!��! ��#��"� �"�� "��%��!��%��+�� %��"��!�"��"��(!��

�� "�� "�� #��"��"��"��!��$�!��"�� (�� ,%�� -�� ,�'.�/��$��

0� �"�� (��1��%��! ��!��

�� "��"��(��1��%��! ��

�!�� 2� �� "�� !�� "��! ��!��+��%�$�(��$��"�1��!��!��! ��!��"��!�� "�� (��!��

�� 3"��%�4��!��+��%!��(��! ��!��,��!��(��%�%!�� (�� 5�� "�� %�� "6� !��$��+� ��%�� 5��+� �� !��$�5��"��(!% ��!��%!��(� �� $��5��

�� 3"��%�4��+��"�$�%!��(��"��%%�� !��7��) ��8

0� /��#��(��%��1�� +��!��$��!��#"�� 9�� !(��"��+�(��%��%!��(�!��$��(��%��%��

�� :��&!�� +��3�� $��3��"��%��

�� /�� ! � �"��+� �� ,��#�(��!�� %��#�(��!��

�� "��(�

�5�� 2�� "�� %��#�(��

�� "�� (�� !�� 1�� :��(!�4�� +�#��"��(!�4�� "�� 5�� ;� �� :�� !�$� �$�� +� �!�"� �� !��+%�5�%!%��#�(��"��5��<�;��:��%�"��%�� +#��"��(!�4��+��%��+��"��5��<�;��#��"��$�� "�(�� %�"�� %��

�� "�#��!��$��5��!�� 5�� ;� �� "�� "�#�� %�� 5�� !��$� ��!��%��($��"��%!��+��=�7�� >� �� 8?�� "�#�� 5��<�;��"�� %��($��,.��(��$��@ <��

0� �� "��"��(�� !��!�� "� �� "$��!��%�� "�1�� (�� %��%��%!%� ��&!��%�� ,.� @ ��1��(��%��!��!�� %��"��"�� "�� (�� (��$� �� %�� %��($��%�5�%!%��(��(��<��(��%��

�� !��"��#��"��"�"��4� (��?(��4+� ��+� (!�4��+� %��+� ��!5��$� ��1�� "��#��"��%!��(��!(��%��"�� $��(��"�� #"��"� �� (�� !��"��!��"��$��#��"��(��"��(��%��:��!��"��$��+�(!��!��+�� $�2��!��

�� (�� $�!� ��-��% ��"��(��%��%�1�� "��A��$�� "��!�� $��

<� �� 1��$�

�� 2�� (��%� ��"�7%��%!%��%�5�%!%8�#"�� ,�� "�� +� �"�� !��(��%��!��


For S

ales

Use

Onl

y!

�� 0��

B� �"��%�5�%!%��#"��"��(�� (�� (��!�� 1�� %��+�(!�� %��(��% ��5��#��"��"��%��"�� (��"��

�� :�� %�� (��%� �� #"�� "�� (��%��"��!��(��"��(��#��1��!��+ ��#�C�� :��(��%� ��"�� +�!��

��5�� (��%� ��"� �� 5�� "��(��%��"+�#"��"�1��%��

(� :�� +�!��5��!��

�� "��!��"�� !��#�� 1�� D�(� ��+� �!�"� ��C� �� !��1��!��+��!��1��+�#��+��+� ��!�!%� ��+� D��4�� !�� +� "�A��!�� +�5 �� +� ��1�� #��"� ��+��#��+��(��%��$��!��"��(��1��

�� :�� #��"�� "�!��(��!��($��"��#��!��C��;��!�� $��"�!��(��4��"��:�(��#��:��.5�% ��C��"��% ��!�� :� �� ;� ��!�� "�!��(��4��+�� 0��:��0�;��!��

�� 3"��%�4��#��"��!5��$�"��%��"��$+�"��1��"��"��(��%��($��

�0� ��#�� (��%�%!�� (�� 5�� #��"�(��%�%��E,F��E/F��(��%%��E/F�� #��%!��(��5��&!��$�

�� "��(��#��4�� "��!��"��! �

�� (�� 1��2��!��%!��(��%��5��1��1�� ,�$� ��1�� 1�� %��%!%� ��&!��7�� 3�� $8� �� 5��1�� %!�� (�� !�� #"��%�4�� G��3��4�� 2��%� ��%��"��5�� "��!��(��"��5��#�� (��% ��

�<� �"��(��%��%(��#��"��"��(��%��"� ��1�� $� �� 5�%�� "�� !�� "�� (��%� ��+� (��+� �"�!�� (�� !�� :��%��(��%�� +��"��(��%� �� $�� :�� $�� +��"��!��$�

�� :��$�� #��"�%��(��%��"��"��"��B��+��"�� %��($��"��(��%��!��"��(��%��$��"��:��"�#��!��"��5��#��(��%��%��"�� $�

�B� :��$�� #��"�%��(��%��"��"��B��+��"�� %��($��"�(��%��$�!��"��B��(��%��$�"��:��"�#�+�!��"��5��#��(��%��%��"�� $�

�� "�� (��%� ��"� ��!��!�� (��(��%�!��$��"��(��%� �� !��$� ��+��5�� "�#��"��0��(��%��"�

�� $+��+�� !��)�� &!��%�%��(��%"��$��%��"��1��!��"�(��%�%!��(��1��"��"��#��"��#�� 1��#��4��"��%!��(��%��#��4�� $� � �� % "� �� :�� !��+� ��

��

�� /��%�,��2��C�� "��(��#��"��(��%�(��"��A��#��"��$��!� ��"��!��

�� !�C� � ��A�� %� � ��D��"��5��"��! ��!��+� (�� +� �� "�� "�1��"��4��#��"��

�� 3��4��,��C��,��%��!��!��(�!��"��"�#��"�3��4��,��2��%�

0� :��$��!� ��C��"��#��"�� 5�� 5�� ($� �"�"��

�� C��A�� "��"��"��!��"��

�� -��(��$��%��C��"��!��(��%��(�$��#"��"�� %�� "�(��%�(��!�� "��1��!��#��"�!��$��"��"��4�

<� ��:��C�� "��(��%�� #"��"��1��"��%��%�%��"��(��%�%��


For S

ales

Use

Onl

y!

��

GENERAL DIMENSIONS

7-)��)��,�.8

��F��

H��!��F��

�<F��

��*��B0F��

�*��F��

�<I

��*�B��F��

B*��BF��

��*��F��

��<�F��

��F��

0�*��F��

��*��F��

�*��F��

�*��

�0*��F�� *��F��

0*��F��

�*��F��

��F��

�*��F��

<*�B��F��:!��

�0*��<�F��%��.5��

��*��F��:!��.5��

��F��

B��F��

��I

��F��

B*��F��

��

��*��BF��

TIRE INFLATIONTire Size Operation Tire Pressure (psi)

11 R 22.5 Stationary1 mph

120120

PONTOON LOADINGSMaximum Pontoon Load: Maximum Pontoon Ground Bearing Pressure:

76,000 lb 170 psi


For S

ales

Use

Onl

y!

��

BOOM MODESBoom Mode “A”

Boom Mode “B”

Only inner mid section telescopes.

Inner mid, outer mid, and tip sec-tions telescope simultaneously.

BoomLength(Ft.)

Tip Section298” Stroke

Outer Mid Section298” Stroke


Base Section

BoomLength(Ft.)


Base Section

.50

35.5

40

50

60.3

35.5

40

50

60

70

80

90

100

110

WIND SPEED RESTRICTIONSIf The Wind Speed Is: Rated Lifted Capacities Must Be Reduced By At Least:

20–29 MPH 40%

30–39 MPH 70%

40 MPH or Greater Crane operation must be shutdown and the boom retractedand lowered to horizontal.

� Additional reductions are required for loads with large wind sail area.� These restrictions are based on crane on fully extended outriggers.� During high winds, the operator shall add 10� to all minimum boom angles due to no load stability and

shall not boom down below that angle.


For S

ales

Use

Onl

y!

��<��

WINCH PERFORMANCEWinch Line Pulls

Two Speed WinchDrum Rope Capacity (Ft.)

Wire Rope Low Speed High SpeedWire RopeLayer Available Lb* Available Lb Layer Total

1 15,519 7,185 97 97

2 14,037 6,499 107 204

3 12,814 5,932 118 322

4 11,787 5,457 128 450

5 10,912 5,052 138 588

*Maximum lifting capacity: Type DB Rope = 11,770, Type RB Rope = 9,080

WIRE ROPE CAPACITYMaximum Lifting Capacities Based On Wire Rope Strength

Parts 5/8” 5/8”of

Line Type DB Type RBNotes

1 11,770 9,080 Capacities shown are in pounds and

2 23,540 18,160 working loads must not exceed the ratingson the capacity charts in the Crane Rating

3 35,310 27,240on the capacity charts in the Crane RatingManual.

4 47,080 36,320 Capacity deducts for auxiliary lifting devices

5 58,850 45,400do not apply for wire rope strengthcapacities.

6 70,620 54,480capacities.Study Operator’s Manual for wire rope

7 82,390 63,560 inspection procedures and single part of lineapplications.

8 94,160 72,640applications.

9 105,930 81,720

LBCE DESCRIPTION

TYPE DB 6 X 26 (6 X 19 Class) – Warrington Seale – Extra Improved Plow Steel –Preformed – Right Regular Lay – I.W.R.C.

TYPE RB 18 X 19 Rotation Resistant – Compact Strand, High Strength Preformed,Right Regular Lay

HYDRAULIC CIRCUIT PRESSURE SETTINGSFunction Pressure (psi)

Front And Rear Winch 3,400

Outriggers 3,000

Boom Hoist 3,500

Telescope 3,000

Swing 2,000

Steering 2,000

Bumper Outrigger 650

Pilot Control 500


For S

ales

Use

Onl

y!

��

WORKING AREAS

Center Of Rotation

Note: These Lines Determine The Limiting Position Of Any Load For Operation Within Working Areas Indicated.



HTC On Tires

Boom Centered Over Rear

Center Of Rotation

HTC On Outriggers

C BoomL

C Rear AxleL

Side

Side

Rear

360�Chart

C Front AxleL

Front

C Outrigger Pontoon

L

See Note

See Note

CAPACITY DEDUCTIONSLoad Handling Equipment Weight (lb)

40 Ton Quick Reeve 4 Sheave Hook Block (See Hook Block For Actual Weight) 780

50 Ton Quick Reeve 5 Sheave Hook Block (See Hook Block For Actual Weight) 1,090

8.5 Ton Hook Ball (See Hook Ball For Actual Weight) 360

Auxiliary Lifting Devices Weight (lb)

Auxiliary Head Attached 100

Lifting From Main Boom With:

28.5 Ft. Or 51 Ft. Fly Stowed On Boom Base (See Operation Note 5) 0

28.5 Ft. Offset Fly Erected But Not Used 3,900

51 Ft. Offset Fly Erected But Not Used 7,800

Lifting From 28.5 Ft. Offset Fly With:

22.5 Ft. Fly Tip Erected But Not Used Prohibited

22.5 Ft. Fly Tip Stowed On 28.5 Ft. Offset Fly Prohibited

Note: Capacity deductions are for Link–Belt supplied equipment only.


For S

ales

Use

Onl

y!

��B��

WORKING RANGE DIAGRAM

�� !"#��$"%�&

�"�"��"'�$��""(��)"'��(%(�""(��)��"$�"�" &�� !�)��*�+��"'��

�� $�+�"$��""(��+��#��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��

Note: Boom and fly geometry shown are for unloaded condition and crane standing level on firm supportingsurface. Boom deflection, subsequent radius, and boom angle change must be accounted for when applyingload to hook.

�-�$ ��"�$ &�%+�$"( .�+"�$"� ��"��

0

10

20

30

40

50

60

80

90

100

110

120

�)�,��)-

70

130

140

20�

30�

40�

50�

60�70�

10�

150

160

90 FT. BOOM + 28.5 FT. FLY

100 FT. BOOM

90 FT. BOOM

80 FT. BOOM

70 FT. BOOM

60.3 FT. BOOM MODE “A”60 FT. BOOM MODE “B”

50 FT. BOOM

40 FT. BOOM35.5 FT. BOOM MODES “A” & “B”

78� MAX.BOOM ANGLE

160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10

10’ 8.5’5.5’

40� OFFSET

20� OFFSET

2� OFFSET

CL

170

170

180

110 FT. BOOM

110 FT. BOOM + 28.5 FT. FLY90 FT. BOOM + 51 FT. FLY

110 FT. BOOM + 51 FT. FLY

5.5’


For S

ales

Use

Onl

y!

��

ALLOWABLE CRANE CONFIGURATION

�"&�/�0 �"&�/�0 12�3� 34�

0+��J

�� <+B��J

�� * �� * �� * ��*

��+��J

��* ��* ��* ��*

��+��J

0+��J

��<+B��J ��* <�*

��+��J ��* ��* ��* ��*

��+��J ��* B�*

0+��J ��* ��*

��<+B��J

�� * �� *��* ��*

��+��J

��* ��*��* ��*

��+��J ��* ��* ��* ��*

0+��J

��<+B��J

�� * �� * �� * ��* �� * ��* �� * ��*��+��J

��* ��* ��* ��* ��* ��* ��* ��*

��+��J

PatentsThis crane is covered by one or more of the following patents:

United States:

4 478 014 4 574 904

4 728 029

CanadaPatented Brevete:

1 212 336


For S

ales

Use

Onl

y!

��

Rated Lifting CapacitiesIn Pounds

FULL OUTRIGGERSMAIN BOOM

“A”4,300 # CTWT

Load 35.5 Ft. 40 Ft.Load

Radius(Ft.) � ° 360° Over

Rear � ° 360° OverRear

Radius(Ft.)

10 68.0 100,000 100,000 70.5 80,900 80,900 10

12 64.5 76,000 76,000 67.5 73,200 73,200 12

15 58.5 65,800 65,800 62.5 63,600 63,600 15

20 48.0 48,900 48,900 54.0 48,700 48,700 20

25 34.5 32,800 37,600 44.0 32,600 37,400 25

30 31.0 22,300 29,800 30

Min.Bm. 0.0 17,800 17,800 0.0 15,400 15,400 Min.Bm.Ang./Cap. (30.0) (34.5) Ang./Cap.

Load 50 Ft. 60.3 Ft.Load



Radius(Ft.)

10 75.0 72,800 72,800 10

12 72.5 65,800 65,800 76.5 50,900 50,900 12

15 69.0 57,700 57,700 73.5 47,300 47,300 15

20 62.5 47,500 47,500 68.5 39,300 39,300 20

25 55.5 31,800 37,100 63.0 31,300 33,500 25

30 48.0 21,900 29,500 57.0 21,400 28,800 30

35 39.0 15,800 22,200 50.5 15,500 21,800 35

40 27.5 11,800 17,100 44.0 11,600 16,900 40

45 36.0 8,700 13,300 45

50 26.0 6,500 10,600 50


( ) Reference Radius For Min. Boom Angle Capacities (Shown in Parenthesis) Are In Feet.


For S

ales

Use

Onl

y!

��

MAIN BOOM“B”


4,300 # CTWTFULL OUTRIGGERS

Load 35.5 Ft. 40 Ft. 50 Ft. LoadRadius

(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

10 68.0 100,000 100,000 70.5 37,900 37,900 74.5 37,900 37,900 10

12 64.5 76,000 76,000 67.5 37,900 37,900 72.5 37,900 37,900 12

15 58.5 65,800 65,800 62.5 37,900 37,900 69.0 37,900 37,900 15

20 48.0 48,900 48,900 54.0 37,900 37,900 62.5 37,900 37,900 20

25 34.5 32,800 37,600 44.0 33,400 37,900 55.5 33,900 37,900 25

30 31.0 23,000 30,300 47.5 23,700 30,900 30

35 39.0 17,500 23,800 35

40 27.5 13,400 18,700 40

Min.Bm. 0.0 17,800 17,800 0.0 14,700 14,700 0.0 10,000 10,000 Min.Bm.Ang./Cap.

(30.0) (34.5) (44.5) Ang./Cap.

Load 60 Ft. 70 Ft. 80 Ft. LoadRadius

(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

10 77.5 37,900 37,900 10

12 76.0 37,900 37,900 78.0* 37,900 37,900 12

15 73.0 37,900 37,900 76.0 37,900 37,900 78.0* 35,400 35,400 15

20 68.0 37,900 37,900 72.0 37,900 37,900 74.5 34,700 34,700 20

25 62.5 34,300 37,900 67.0 34,500 37,900 71.0 34,300 34,300 25

30 56.5 24,000 31,300 62.5 24,200 31,500 67.0 24,300 30,400 30

35 50.0 17,900 24,100 57.5 18,100 24,300 62.5 18,200 24,400 35

40 43.5 13,800 19,100 52.0 14,000 19,300 58.0 14,100 19,400 40

45 35.5 10,900 15,400 46.5 11,100 15,700 53.5 11,200 15,800 45

50 25.0 8,600 12,600 40.0 8,900 12,900 48.5 9,100 13,000 50

55 32.5 7,200 10,700 43.5 7,400 11,000 55

60 23.0 5,700 9,000 37.5 6,000 9,200 60

65 30.5 4,800 7,800 65

70 21.5 3,900 6,600 70


(54.5) (64.5) (74.5) Ang./Cap.

( ) Reference Radius For Min. Boom Angle Capacities (Shown In Parenthesis) Are In Feet.* This Capacity Based On Maximum Obtainable Boom Angle.


For S

ales

Use

Onl

y!

��

MAIN BOOM“B”




(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

20 77.0 28,900 28,900 20

25 74.0 28,300 28,300 76.0 24,000 24,000 77.5 19,500 19,500 25

30 70.5 24,400 24,900 73.0 22,600 22,600 75.0 19,500 19,500 30

35 66.5 18,300 22,100 70.0 18,400 20,100 72.5 18,400 18,500 35

40 62.5 14,200 19,500 66.5 14,300 18,000 69.5 14,300 16,500 40

45 59.0 11,300 15,900 63.0 11,400 15,900 66.5 11,500 14,700 45

50 54.5 9,200 13,100 59.5 9,200 13,200 63.0 9,300 13,200 50

55 50.5 7,500 11,100 56.0 7,500 11,100 60.0 7,600 11,200 55

60 46.0 6,100 9,400 52.0 6,200 9,400 56.5 6,200 9,500 60

65 41.0 5,000 7,900 48.0 5,100 8,000 53.0 5,100 8,100 65

70 35.5 4,000 6,700 43.5 4,100 6,800 49.5 4,200 6,900 70

75 29.0 3,200 5,700 39.0 3,300 5,800 46.0 3,400 5,900 75

80 20.5 2,500 4,800 34.0 2,600 5,000 42.0 2,700 5,100 80

85 27.5 2,000 4,200 37.5 2,100 4,300 85

90 20.0 1,500 3,600 32.5 1,600 3,600 90

Min.Bm. 0.0 2,000 2,500 13.0 27.5 Min.Bm.Ang./Cap.

(84.5) (92.8) (93.9) Ang./Cap.

�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��

( ) Reference Radius For Min. Boom Angle Capacities (Shown In Parenthesis) Are In Feet.


For S

ales

Use

Onl

y!

�� 0��

28.5 Ft. Offset Fly

90 Ft. Main Boom

2� Offset

40� Offset

20�Offset



Load 2� Offset 20� Offset 40� Offset LoadRadius

(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

30 77.0 16,900 30

35 74.5 14,200 35

40 72.0 13,500 75.5 10,600 40

45 69.5 12,500 73.0 10,100 76.5 7,900 45

50 66.5 10,300 70.5 9,700 73.5 7,700 50

55 63.5 8,500 68.0 9,200 71.0 7,400 55

60 60.5 7,100 64.5 7,800 68.0 7,200 60

65 57.5 5,900 61.5 6,500 65.0 7,000 65

70 54.0 5,000 58.0 5,500 61.5 5,900 70

75 50.5 4,200 54.5 4,600 58.0 5,000 75

80 47.0 3,500 51.0 3,900 54.0 4,100 80

85 43.5 2,900 47.5 3,200 49.5 3,400 85

90 39.5 2,300 43.0 2,600 45.0 2,800 90

95 35.0 1,900 38.5 2,100 40.0 2,200 95

100 30.0 1,500 33.5 1,600 100

105 27.0 1,200 105

�"�"��"'�$12�3��+��)*��"$6��"+��"��)"'13�3°� ��""(��)��)�++� ��""(

��+21��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��


For S

ales

Use

Onl

y!

��

51 Ft. Offset Fly

90 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

35 78.0* 9,200 35

40 76.0 8,600 40

45 74.0 8,100 45

50 72.0 7,600 78.0* 5,500 50

55 70.0 7,000 75.5 5,200 55

60 67.5 6,600 73.5 4,900 60

65 65.5 6,100 71.0 4,700 77.0 3,700 65

70 63.0 5,600 69.0 4,400 74.5 3,600 70

75 60.5 4,800 66.5 4,200 72.0 3,500 75

80 58.0 4,100 64.0 4,100 69.5 3,400 80

85 55.0 3,500 61.5 3,900 66.5 3,300 85

90 52.0 2,900 58.5 3,500 63.5 3,200 90

95 49.5 2,500 55.5 3,000 60.5 3,200 95

100 46.5 2,000 52.5 2,500 57.5 2,900 100

105 43.0 1,600 49.0 2,100 53.5 2,400 105

110 45.5 1,700 49.5 1,900 110

115 41.5 1,300 44.5 1,500 115

�"�"��"'�$34��+��)*��"$6��"+��"��)"'78�8°� ��""(��)��)�++� ��""(��

�+97��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��

* This Capacity Based On Maximum Obtainable Boom Angle.


For S

ales

Use

Onl

y!

��

28.5 Ft. Offset Fly

110 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

35 77.0 9,400 35

40 75.5 9,400 40

45 73.5 9,400 77.0 9,600 45

50 71.5 9,400 75.0 9,200 78.0* 7,600 50

55 69.0 8,300 73.0 8,600 75.5 7,400 55

60 66.5 6,900 70.5 7,700 73.5 7,200 60

65 64.0 5,800 68.0 6,400 71.0 7,000 65

70 61.5 4,800 65.0 5,400 68.5 5,900 70

75 58.5 4,000 62.5 4,500 65.5 4,900 75

80 56.0 3,300 59.5 3,700 62.5 4,100 80

85 53.0 2,700 56.5 3,100 59.5 3,400 85

90 50.0 2,200 53.5 2,500 56.0 2,800 90

95 47.0 1,700 50.5 2,000 52.5 2,200 95

100 44.0 1,300 47.0 1,600 49.0 1,700 100

105 45.5 1,300 105

�"�"��"'�$12�3��+��)*��"$6��"+��"��)"'7:�8°� ��""(��)��)�++� ��""(

��+21��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��

*This Capacity Based On Maximum Obtainable Boom Angle.


For S

ales

Use

Onl

y!

��<��

51 Ft. Offset Fly

110 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

45 77.0 6,200 45

50 75.5 6,200 50

55 74.0 6,200 55

60 72.5 6,200 77.5 4,900 60

65 70.5 6,100 75.5 4,700 65

70 68.5 5,300 73.5 4,500 70

75 66.0 4,500 71.5 4,300 76.5 3,500 75

80 64.0 3,800 70.0 4,200 74.5 3,400 80

85 61.5 3,200 67.5 3,900 72.5 3,300 85

90 59.0 2,600 65.0 3,300 70.0 3,300 90

95 57.0 2,200 62.5 2,800 68.0 3,200 95

100 54.5 1,700 60.0 2,300 65.0 2,800 100

105 57.5 1,900 62.5 2,300 105

110 55.0 1,500 59.5 1,900 110

115 56.0 1,500 115

�"�"��"'�$34��+��)*��"$6��"+��"��)"'3:�8°� ��""(��)��)�++� ��""(��

�+97��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��


For S

ales

Use

Onl

y!

��

This Page Left Blank Intentionally


For S

ales

Use

Onl

y!

��B��



“A”7,900 # CTWT




Radius(Ft.)

10 68.0 100,000 100,000 70.5 80,900 80,900 10

12 64.5 76,000 76,000 67.5 73,200 73,200 12

15 58.5 65,800 65,800 62.5 63,600 63,600 15

20 48.0 50,700 50,700 54.0 50,500 50,500 20

25 34.5 37,200 39,000 44.0 37,000 38,900 25

30 31.0 25,600 31,000 30





Radius(Ft.)

10 75.0 72,800 72,800 10

12 72.5 65,800 65,800 76.5 50,900 50,900 12

15 69.0 57,700 57,700 73.5 47,300 47,300 15

20 62.5 47,500 47,500 68.5 39,300 39,300 20

25 55.5 36,200 38,500 63.0 33,500 33,500 25

30 48.0 25,100 30,700 57.0 24,700 28,800 30

35 39.0 18,500 24,700 51.0 18,100 24,300 35

40 27.5 13,900 19,200 44.0 13,800 19,000 40

45 36.0 10,600 15,100 45

50 26.0 8,200 12,100 50




For S

ales

Use

Onl

y!

��

MAIN BOOM“B”




(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

10 68.0 100,000 100,000 70.5 37,900 37,900 74.5 37,900 37,900 10

12 64.5 76,000 76,000 67.5 37,900 37,900 72.5 37,900 37,900 12

15 58.5 65,800 65,800 62.5 37,900 37,900 69.0 37,900 37,900 15

20 48.0 50,700 50,700 54.0 37,900 37,900 62.5 37,900 37,900 20

25 34.5 37,200 39,000 44.0 37,800 37,900 55.5 37,900 37,900 25

30 31.0 26,300 31,500 47.5 27,000 32,100 30

35 39.0 20,200 26,300 35

40 27.5 15,600 20,800 40


(30.0) (34.5) (44.5) Ang./Cap.


(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

10 77.5 37,900 37,900 10

12 76.0 37,900 37,900 78.0* 37,900 37,900 12

15 73.0 37,900 37,900 76.0 37,900 37,900 78.0* 35,400 35,400 15

20 68.0 37,900 37,900 72.0 37,900 37,900 74.5 34,700 34,700 20

25 62.5 37,900 37,900 67.5 37,900 37,900 71.0 34,300 34,300 25

30 56.5 27,300 32,500 62.5 27,500 32,700 67.0 27,600 30,400 30

35 50.5 20,500 26,700 57.5 20,700 26,900 62.5 20,800 27,000 35

40 43.5 16,000 21,200 52.0 16,200 21,400 58.5 16,300 21,500 40

45 35.5 12,700 17,200 46.5 13,000 17,500 53.5 13,100 17,600 45

50 25.0 10,200 14,200 40.0 10,600 14,500 49.0 10,700 14,600 50

55 32.5 8,600 12,100 43.5 8,800 12,300 55

60 23.0 7,100 10,300 37.5 7,300 10,500 60

65 31.0 6,000 8,900 65

70 22.0 5,000 7,600 70


(54.5) (64.5) (74.5) Ang./Cap.



For S

ales

Use

Onl

y!

��

MAIN BOOM“B”




(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

20 77.0 28,900 28,900 20

25 74.0 28,300 28,300 76.0 24,000 24,000 77.5 19,500 19,500 25

30 70.5 24,900 24,900 73.0 22,600 22,600 75.0 19,500 19,500 30

35 67.0 20,900 22,100 70.0 20,100 20,100 72.5 18,500 18,500 35

40 63.0 16,400 19,800 66.5 16,500 18,000 70.0 16,500 16,500 40

45 59.0 13,200 17,700 63.0 13,200 16,200 66.5 13,300 14,700 45

50 55.0 10,800 14,700 59.5 10,900 14,500 63.5 10,900 13,300 50

55 50.5 8,900 12,400 56.0 9,000 12,500 60.5 9,000 12,100 55

60 46.0 7,400 10,600 52.0 7,500 10,700 57.0 7,500 10,800 60

65 41.0 6,200 9,100 48.0 6,200 9,200 53.5 6,300 9,200 65

70 35.5 5,100 7,800 44.0 5,200 7,900 50.0 5,300 8,000 70

75 29.0 4,200 6,700 39.5 4,300 6,800 46.0 4,400 6,900 75

80 21.0 3,400 5,800 34.0 3,600 5,900 42.0 3,700 6,000 80

85 28.0 2,900 5,100 37.5 3,000 5,200 85

90 20.0 2,300 4,400 32.5 2,400 4,400 90

95 27.0 1,900 3,800 95

100 19.5 1,400 3,300 100

Min.Bm. 0.0 2,500 2,500 0.0 1,600 1,600 12.0 Min.Bm.Ang./Cap.

(84.5) (94.5) (103.1) Ang./Cap.

�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��

28.5 Ft. Offset Fly

90 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

30 77.0 16,900 30

35 74.5 14,200 35

40 72.0 13,500 75.5 10,600 40

45 69.5 12,800 73.0 10,100 76.5 7,900 45

50 67.0 11,900 70.5 9,700 73.5 7,700 50

55 64.0 10,000 68.0 9,200 71.0 7,400 55

60 61.0 8,400 65.0 8,800 68.0 7,200 60

65 57.5 7,100 62.0 7,700 65.0 7,000 65

70 54.5 6,100 58.5 6,600 62.0 6,900 70

75 51.0 5,200 55.0 5,600 58.0 6,000 75

80 47.5 4,400 51.5 4,800 54.5 5,100 80

85 44.0 3,700 47.5 4,100 50.0 4,300 85

90 40.0 3,200 43.5 3,400 45.5 3,600 90

95 35.5 2,600 39.0 2,900 40.5 3,000 95

100 30.5 2,200 33.5 2,400 100

105 24.5 1,800 27.0 1,900 105

110 16.0 1,400 110

Min.Bm. 0.0 800 0.0 900 0.0 900 Min.Bm.Ang./Cap. Ang./Cap.


For S

ales

Use

Onl

y!

��

51 Ft. Offset Fly

90 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

35 78.0* 9,200 35

40 76.0 8,600 40

45 74.0 8,100 45

50 72.0 7,600 78.0* 5,500 50

55 70.0 7,000 75.5 5,200 55

60 67.5 6,600 73.5 4,900 60

65 65.5 6,100 71.0 4,700 77.0 3,700 65

70 63.0 5,800 69.0 4,400 74.5 3,600 70

75 61.0 5,400 66.5 4,200 72.0 3,500 75

80 58.5 5,000 64.0 4,100 69.5 3,400 80

85 55.5 4,300 61.5 3,900 66.5 3,300 85

90 52.5 3,700 59.0 3,800 63.5 3,200 90

95 50.0 3,200 56.0 3,600 60.5 3,200 95

100 46.5 2,800 53.0 3,200 57.5 3,100 100

105 43.5 2,300 49.5 2,800 54.0 3,100 105

110 40.0 2,000 46.0 2,300 49.5 2,600 110

115 36.5 1,600 42.0 1,900 45.0 2,100 115

120 32.0 1,300 37.5 1,600 120

125 32.5 1,200 125

�"�"��"'�$34��+��)*��"$6��"+��"��)"':4�8°� ��""(��)��)�++� ��""(��

�+21��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

�� 0��

28.5 Ft. Offset Fly

110 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

35 77.0 9,400 35

40 75.5 9,400 40

45 73.5 9,400 77.0 9,600 45

50 71.5 9,400 75.0 9,200 78.0* 7,600 50

55 69.5 9,300 73.0 8,600 75.5 7,400 55

60 67.0 8,200 70.5 8,000 73.5 7,200 60

65 64.5 6,900 68.5 7,400 71.0 7,000 65

70 62.0 5,900 65.5 6,500 68.5 6,600 70

75 59.0 5,000 63.0 5,500 66.0 5,900 75

80 56.5 4,200 60.0 4,700 63.0 5,100 80

85 53.5 3,600 57.0 4,000 60.0 4,300 85

90 50.5 3,000 54.0 3,300 56.5 3,600 90

95 47.5 2,500 51.0 2,800 53.0 3,000 95

100 44.5 2,000 47.5 2,300 49.5 2,500 100

105 41.0 1,600 44.0 1,800 46.0 2,000 105

110 37.0 1,200 40.5 1,400 41.5 1,500 110

�"�"��"'�$12�3��+��)*��"$6��"+��"��)"':;�8°� ��""(��)��)�++� ��""(

��+<4��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��

51 Ft. Offset Fly

110 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

45 77.0 6,200 45

50 75.5 6,200 50

55 74.0 6,200 55

60 72.5 6,200 77.5 4,900 60

65 70.5 6,100 75.5 4,700 65

70 68.5 5,800 73.5 4,500 70

75 66.5 5,400 71.5 4,300 76.5 3,500 75

80 64.5 4,700 70.0 4,200 74.5 3,400 80

85 62.0 4,100 68.0 4,000 72.5 3,300 85

90 60.0 3,500 65.5 3,900 70.0 3,300 90

95 57.5 2,900 63.5 3,600 68.0 3,200 95

100 55.0 2,500 61.0 3,000 65.5 3,200 100

105 52.5 2,100 58.0 2,600 63.0 3,000 105

110 50.0 1,700 55.5 2,200 60.0 2,500 110

115 52.5 1,800 56.5 2,100 115

120 49.5 1,400 53.5 1,700 120

125 50.0 1,300 125

�"�"��"'�$34��+��)*��"$6��"+��"��)"'72�8°� ��""(��)��)�++� ��""(��

�+21��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��


For S

ales

Use

Onl

y!

��



For S

ales

Use

Onl

y!

��<��



“A”11,500 # CTWT




Radius(Ft.)

10 68.0 100,000 100,000 70.5 80,900 80,900 10

12 64.5 76,000 76,000 67.5 73,200 73,200 12

15 58.5 65,800 65,800 62.5 63,600 63,600 15

20 48.0 52,500 52,500 54.0 52,000 52,000 20

25 34.5 40,500 40,500 44.0 40,300 40,300 25

30 31.0 28,900 32,200 30





Radius(Ft.)

10 75.0 72,800 72,800 10

12 72.5 65,800 65,800 76.5 50,900 50,900 12

15 69.0 57,700 57,700 73.5 47,300 47,300 15

20 62.5 47,500 47,500 68.5 39,300 39,300 20

25 55.5 40,000 40,000 63.0 33,500 33,500 25

30 48.0 28,500 31,900 57.0 28,000 28,800 30

35 39.0 21,100 26,100 51.0 20,800 25,300 35

40 27.5 16,100 21,300 44.0 16,000 21,100 40

45 36.0 12,400 16,900 45

50 26.0 9,800 13,700 50




For S

ales

Use

Onl

y!

��

MAIN BOOM“B”




(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

10 68.0 100,000 100,000 70.5 37,900 37,900 74.5 37,900 37,900 10

12 64.5 76,000 76,000 67.5 37,900 37,900 72.5 37,900 37,900 12

15 58.5 65,800 65,800 62.5 37,900 37,900 69.0 37,900 37,900 15

20 48.0 52,500 52,500 54.0 37,900 37,900 62.5 37,900 37,900 20

25 34.5 40,500 40,500 44.0 37,900 37,900 55.5 37,900 37,900 25

30 31.0 29,600 32,700 48.0 30,300 33,300 30

35 39.0 22,800 27,500 35

40 27.5 17,700 22,900 40


(30.0) (34.5) (44.5) Ang./Cap.


(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

10 77.5 37,900 37,900 10

12 76.0 37,900 37,900 78.0* 37,900 37,900 12

15 73.0 37,900 37,900 76.0 37,900 37,900 78.0* 35,400 35,400 15

20 68.0 37,900 37,900 72.0 37,900 37,900 74.5 34,700 34,700 20

25 62.5 37,900 37,900 67.5 37,900 37,900 71.0 34,300 34,300 25

30 56.5 30,600 33,700 62.5 30,800 32,900 67.0 30,400 30,400 30

35 50.5 23,200 27,800 57.5 23,400 28,100 63.0 23,400 27,300 35

40 43.5 18,200 23,400 52.5 18,400 23,500 58.5 18,500 23,600 40

45 35.5 14,600 19,000 46.5 14,800 19,300 54.0 15,000 19,400 45

50 25.0 11,900 15,800 40.0 12,200 16,100 49.0 12,300 16,200 50

55 33.0 10,100 13,600 43.5 10,300 13,800 55

60 23.5 8,400 11,600 38.0 8,600 11,700 60

65 31.0 7,200 10,100 65

70 22.0 6,000 8,700 70


(54.5) (64.5) (74.5) Ang./Cap.



For S

ales

Use

Onl

y!

��B��

MAIN BOOM“B”




(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

20 77.0 28,900 28,900 20

25 74.0 28,300 28,300 76.0 24,000 24,000 77.5 19,500 19,500 25

30 70.5 24,900 24,900 73.0 22,600 22,600 75.0 19,500 19,500 30

35 67.0 22,100 22,100 70.0 20,100 20,100 72.5 18,500 18,500 35

40 63.0 18,600 19,800 67.0 18,000 18,000 70.0 16,500 16,500 40

45 59.0 15,000 17,900 63.5 15,100 16,200 67.0 14,700 14,700 45

50 55.0 12,400 16,200 60.0 12,400 14,500 64.0 12,500 13,300 50

55 51.0 10,400 13,800 56.5 10,400 13,200 60.5 10,500 12,100 55

60 46.5 8,700 11,900 52.5 8,800 11,900 57.5 8,800 11,100 60

65 41.5 7,400 10,300 48.5 7,400 10,300 54.0 7,500 10,100 65

70 36.0 6,200 8,900 44.0 6,300 9,000 50.0 6,400 9,000 70

75 29.5 5,200 7,700 39.5 5,300 7,800 46.5 5,400 7,900 75

80 21.0 4,400 6,700 34.5 4,500 6,800 42.5 4,600 6,900 80

85 28.0 3,800 5,900 38.0 3,900 6,000 85

90 20.0 3,100 5,200 33.0 3,200 5,200 90

95 27.0 2,700 4,600 95

100 19.5 2,200 4,000 100

Min.Bm. 0.0 2,500 2,500 0.0 1,600 1,600 0.0 900 900 Min.Bm.Ang./Cap.

(84.5) (94.5) (104.5) Ang./Cap.



For S

ales

Use

Onl

y!

��

28.5 Ft. Offset Fly

90 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

30 77.0 16,900 30

35 74.5 14,200 35

40 72.0 13,500 75.5 10,600 40

45 69.5 12,800 73.0 10,100 76.5 7,900 45

50 67.0 12,100 70.5 9,700 73.5 7,700 50

55 64.0 11,400 68.0 9,200 71.0 7,400 55

60 61.0 9,700 65.0 8,800 68.0 7,200 60

65 58.0 8,300 62.0 8,400 65.0 7,000 65

70 55.0 7,200 59.0 7,700 62.0 6,900 70

75 51.5 6,200 55.5 6,600 58.5 6,800 75

80 48.0 5,300 52.0 5,700 54.5 6,000 80

85 44.0 4,600 48.0 4,900 50.5 5,200 85

90 40.0 4,000 44.0 4,300 46.0 4,400 90

95 35.5 3,400 39.0 3,600 40.5 3,700 95

100 30.5 2,900 34.0 3,100 100

105 24.5 2,500 27.5 2,600 105

110 16.0 2,100 110



For S

ales

Use

Onl

y!

��

51 Ft. Offset Fly

90 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

35 78.0* 9,200 35

40 76.0 8,600 40

45 74.0 8,100 45

50 72.0 7,600 78.0* 5,500 50

55 70.0 7,000 75.5 5,200 55

60 67.5 6,600 73.5 4,900 60

65 65.5 6,100 71.0 4,700 77.0 3,700 65

70 63.0 5,800 69.0 4,400 74.5 3,600 70

75 61.0 5,400 66.5 4,200 72.0 3,500 75

80 58.5 5,100 64.0 4,100 69.5 3,400 80

85 56.0 4,800 61.5 3,900 66.5 3,300 85

90 53.0 4,600 59.0 3,800 63.5 3,200 90

95 50.0 4,000 56.0 3,600 60.5 3,200 95

100 47.0 3,500 53.0 3,500 57.5 3,100 100

105 44.0 3,000 50.0 3,400 54.0 3,100 105

110 40.5 2,600 46.5 3,000 50.0 3,100 110

115 36.5 2,200 42.5 2,600 45.5 2,700 115

120 32.5 1,900 38.0 2,200 39.5 2,200 120

125 27.5 1,600 32.5 1,800 125

130 21.5 1,300 25.5 1,400 130

135 11.5 1,100 135




For S

ales

Use

Onl

y!

��

28.5 Ft. Offset Fly

110 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

35 77.0 9,400 35

40 75.5 9,400 40

45 73.5 9,400 77.0 9,600 45

50 71.5 9,400 75.0 9,200 78.0* 7,600 50

55 69.5 9,300 73.0 8,600 75.5 7,400 55

60 67.5 8,600 70.5 8,000 73.5 7,200 60

65 65.0 8,000 68.5 7,400 71.0 7,000 65

70 62.5 7,000 66.0 7,000 68.5 6,600 70

75 59.5 6,000 63.5 6,500 66.0 6,200 75

80 57.0 5,200 60.5 5,600 63.5 5,900 80

85 54.0 4,400 57.5 4,800 60.5 5,200 85

90 51.0 3,800 54.5 4,200 57.0 4,400 90

95 48.0 3,200 51.5 3,600 53.5 3,800 95

100 45.0 2,700 48.0 3,000 50.0 3,200 100

105 41.5 2,300 44.5 2,500 46.5 2,700 105

110 37.5 1,900 40.5 2,100 42.0 2,200 110

115 33.5 1,500 36.5 1,700 115

120 29.0 1,200 31.5 1,300 120

�"�"��"'�$12�3��+��)*��"$6��"+��"��)"'19�8°� ��""(��)��)�++� ��""(

��+484��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��

51 Ft. Offset Fly

110 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

45 77.0 6,200 45

50 75.5 6,200 50

55 74.0 6,200 55

60 72.5 6,200 77.5 4,900 60

65 70.5 6,100 75.5 4,700 65

70 68.5 5,800 73.5 4,500 70

75 66.5 5,400 71.5 4,300 76.5 3,500 75

80 64.5 5,000 70.0 4,200 74.5 3,400 80

85 62.5 4,700 68.0 4,000 72.5 3,300 85

90 60.5 4,300 65.5 3,900 70.0 3,300 90

95 58.0 3,700 63.5 3,700 68.0 3,200 95

100 55.5 3,200 61.5 3,600 65.5 3,200 100

105 53.0 2,700 59.0 3,300 63.0 3,100 105

110 50.5 2,300 56.0 2,800 60.5 3,100 110

115 47.5 2,000 53.0 2,400 57.5 2,700 115

120 45.0 1,600 50.0 2,000 54.0 2,300 120

125 42.0 1,300 47.0 1,700 50.5 1,900 125

130 43.5 1,300 46.5 1,500 130

135 42.0 1,100 135

�"�"��"'�$34��+��)*��"$6��"+��"��)"'74�8°� ��""(��)��)�++� ��""(��

�+<8��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��


For S

ales

Use

Onl

y!

�� 0��



For S

ales

Use

Onl

y!

��



“A”15,100 # CTWT




Radius(Ft.)

10 68.0 100,000 100,000 70.5 80,900 80,900 10

12 64.5 76,000 76,000 67.5 73,200 73,200 12

15 58.5 65,800 65,800 62.5 63,600 63,600 15

20 48.0 53,400 53,400 54.0 52,000 52,000 20

25 34.5 41,900 41,900 44.0 41,700 41,700 25

30 31.0 32,200 33,400 30





Radius(Ft.)

10 75.0 72,800 72,800 10

12 72.5 65,800 65,800 76.5 50,900 50,900 12

15 69.0 57,700 57,700 73.5 47,300 47,300 15

20 62.5 47,500 47,500 68.5 39,300 39,300 20

25 55.5 40,300 40,300 63.0 33,500 33,500 25

30 48.0 31,800 33,100 57.5 28,800 28,800 30

35 39.0 23,700 27,100 51.0 23,400 25,300 35

40 27.5 18,300 22,600 44.0 18,100 22,400 40

45 36.0 14,300 18,700 45

50 26.0 11,500 15,300 50




For S

ales

Use

Onl

y!

��

MAIN BOOM“B”




(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

10 68.0 100,000 100,000 70.5 37,900 37,900 74.5 37,900 37,900 10

12 64.5 76,000 76,000 67.5 37,900 37,900 72.5 37,900 37,900 12

15 58.5 65,800 65,800 62.5 37,900 37,900 69.0 37,900 37,900 15

20 48.0 53,400 53,400 54.0 37,900 37,900 62.5 37,900 37,900 20

25 34.5 41,900 41,900 44.0 37,900 37,900 55.5 37,900 37,900 25

30 31.0 32,900 33,900 48.0 33,600 34,500 30

35 39.0 25,400 28,500 35

40 27.5 19,900 24,000 40


(30.0) (34.5) (44.5) Ang./Cap.


(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

10 77.5 37,900 37,900 10

12 76.0 37,900 37,900 78.0* 37,900 37,900 12

15 73.0 37,900 37,900 76.0 37,900 37,900 78.0* 35,400 35,400 15

20 68.0 37,900 37,900 72.0 37,900 37,900 74.5 34,700 34,700 20

25 62.5 37,900 37,900 67.5 37,900 37,900 71.0 34,300 34,300 25

30 56.5 33,900 34,500 62.5 32,900 32,900 67.0 30,400 30,400 30

35 50.5 25,800 28,900 57.5 25,900 29,000 63.0 26,100 27,300 35

40 43.5 20,400 24,300 52.5 20,600 24,600 58.5 20,700 24,500 40

45 35.5 16,500 20,800 46.5 16,700 21,100 54.0 16,800 21,200 45

50 25.0 13,500 17,400 40.5 13,800 17,700 49.0 13,900 17,800 50

55 33.0 11,500 15,000 44.0 11,700 15,200 55

60 23.5 9,700 12,800 38.0 9,900 13,000 60

65 31.0 8,400 11,300 65

70 22.0 7,100 9,800 70


(54.5) (64.5) (74.5) Ang./Cap.



For S

ales

Use

Onl

y!

��<��

MAIN BOOM“B”




(Ft.) � ° 360° OverRear � ° 360° Over


Radius(Ft.)

20 77.0 28,900 28,900 20

25 74.0 28,300 28,300 76.0 24,000 24,000 77.5 19,500 19,500 25

30 70.5 24,900 24,900 73.0 22,600 22,600 75.0 19,500 19,500 30

35 67.0 22,100 22,100 70.0 20,100 20,100 72.5 18,500 18,500 35

40 63.5 19,800 19,800 67.0 18,000 18,000 70.0 16,500 16,500 40

45 59.5 16,900 17,900 63.5 16,200 16,200 67.0 14,700 14,700 45

50 55.5 14,000 16,200 60.0 14,100 14,500 64.0 13,300 13,300 50

55 51.0 11,800 14,700 56.5 11,800 13,200 61.0 11,900 12,100 55

60 46.5 10,000 13,100 52.5 10,100 12,100 57.5 10,200 11,100 60

65 41.5 8,600 11,400 48.5 8,600 11,200 54.0 8,700 10,100 65

70 36.0 7,300 9,900 44.5 7,400 10,000 50.5 7,500 9,200 70

75 29.5 6,200 8,700 39.5 6,300 8,800 46.5 6,400 8,400 75

80 21.0 5,300 7,600 34.5 5,400 7,700 42.5 5,500 7,600 80

85 28.5 4,600 6,800 38.0 4,700 6,900 85

90 20.5 4,000 6,000 33.0 4,000 6,000 90

95 27.5 3,400 5,300 95

100 20.0 2,900 4,700 100

Min.Bm. 0.0 2,500 2,500 0.0 1,600 1,600 0.0 900 900 Min.Bm.Ang./Cap.

(84.5) (94.5) (104.5) Ang./Cap.



For S

ales

Use

Onl

y!

��

28.5 Ft. Offset Fly

90 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

30 77.0 16,900 30

35 74.5 14,200 35

40 72.0 13,500 75.5 10,600 40

45 69.5 12,800 73.0 10,100 76.5 7,900 45

50 67.0 12,100 70.5 9,700 73.5 7,700 50

55 64.5 11,500 68.0 9,200 71.0 7,400 55

60 61.5 10,700 65.0 8,800 68.0 7,200 60

65 58.5 9,500 62.0 8,400 65.0 7,000 65

70 55.0 8,300 59.0 8,000 62.0 6,900 70

75 51.5 7,200 56.0 7,600 58.5 6,800 75

80 48.0 6,300 52.0 6,700 55.0 6,700 80

85 44.5 5,500 48.5 5,800 51.0 6,000 85

90 40.5 4,800 44.0 5,100 46.0 5,200 90

95 36.0 4,200 39.5 4,400 41.0 4,500 95

100 31.0 3,600 34.5 3,800 100

105 25.0 3,100 28.0 3,300 105

110 16.5 2,700 110



For S

ales

Use

Onl

y!

��B��

51 Ft. Offset Fly

90 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

35 78.0* 9,200 35

40 76.0 8,600 40

45 74.0 8,100 45

50 72.0 7,600 78.0* 5,500 50

55 70.0 7,000 75.5 5,200 55

60 67.5 6,600 73.5 4,900 60

65 65.5 6,100 71.0 4,700 77.0 3,700 65

70 63.0 5,800 69.0 4,400 74.5 3,600 70

75 61.0 5,400 66.5 4,200 72.0 3,500 75

80 58.5 5,100 64.0 4,100 69.5 3,400 80

85 56.0 4,800 61.5 3,900 66.5 3,300 85

90 53.0 4,600 59.0 3,800 63.5 3,200 90

95 50.5 4,300 56.0 3,600 60.5 3,200 95

100 47.5 4,100 53.0 3,500 57.5 3,100 100

105 44.5 3,700 50.0 3,400 54.0 3,100 105

110 41.0 3,300 46.5 3,300 50.0 3,100 110

115 37.0 2,900 43.0 3,200 45.5 3,100 115

120 33.0 2,500 38.5 2,800 40.0 2,800 120

125 28.0 2,200 33.0 2,400 125

130 22.0 1,900 26.0 2,000 130

135 11.0 1,300 135




For S

ales

Use

Onl

y!

�� 0��

28.5 Ft. Offset Fly

110 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

35 77.0 9,400 35

40 75.5 9,400 40

45 73.5 9,400 77.0 9,600 45

50 71.5 9,400 75.0 9,200 78.0* 7,600 50

55 69.5 9,300 73.0 8,600 75.5 7,400 55

60 67.5 8,600 70.5 8,000 73.5 7,200 60

65 65.0 8,000 68.5 7,400 71.0 7,000 65

70 62.5 7,500 66.0 7,000 68.5 6,600 70

75 60.0 7,000 63.5 6,500 66.0 6,200 75

80 57.5 6,100 61.0 6,200 63.5 5,900 80

85 54.5 5,300 58.0 5,700 60.5 5,600 85

90 51.5 4,600 55.0 5,000 57.5 5,200 90

95 48.5 4,000 52.0 4,300 54.0 4,500 95

100 45.0 3,500 48.5 3,700 50.5 3,900 100

105 42.0 3,000 45.0 3,200 46.5 3,400 105

110 38.0 2,500 41.0 2,700 42.5 2,800 110

115 34.0 2,200 37.0 2,300 115

120 29.5 1,800 32.0 1,900 120

125 24.0 1,500 26.0 1,500 125

130 16.0 1,200 130

�"�"��"'�$12�3��+��)*��"$6��"+��"��)"'44�3°� ��""(��)��)�++� ��""(

��+48<��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��0��

51 Ft. Offset Fly

110 Ft. Main Boom

2� Offset

40� Offset

20�Offset




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

45 77.0 6,200 45

50 75.5 6,200 50

55 74.0 6,200 55

60 72.5 6,200 77.5 4,900 60

65 70.5 6,100 75.5 4,700 65

70 68.5 5,800 73.5 4,500 70

75 66.5 5,400 71.5 4,300 76.5 3,500 75

80 64.5 5,000 70.0 4,200 74.5 3,400 80

85 62.5 4,700 68.0 4,000 72.5 3,300 85

90 60.5 4,400 65.5 3,900 70.0 3,300 90

95 58.5 4,100 63.5 3,700 68.0 3,200 95

100 56.0 3,900 61.5 3,600 65.5 3,200 100

105 53.5 3,400 59.0 3,400 63.0 3,100 105

110 51.0 3,000 56.5 3,300 60.5 3,100 110

115 48.0 2,600 54.0 3,000 57.5 3,000 115

120 45.5 2,200 50.5 2,600 54.5 2,800 120

125 42.5 1,900 47.5 2,200 51.0 2,400 125

130 39.0 1,600 44.0 1,900 47.0 2,000 130

135 35.5 1,300 40.5 1,600 42.5 1,700 135

140 36.5 1,300 140

�"�"��"'�$34��+��)*��"$6��"+��"��)"':7�8°� ��""(��)��)�++� ��""(��

�+<2��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��


For S

ales

Use

Onl

y!

�� 0��



For S

ales

Use

Onl

y!

��0��

Rated Lifting CapacitiesIn Pounds MAIN BOOM

“A”INTERMEDIATE OUTRIGGERS 4,300# CTWT

Load 35.5 Ft. 40 Ft. LoadRadius

(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 68.0 84,100 70.5 80,900 10

12 64.5 76,000 67.5 73,200 12

15 58.5 45,400 62.5 44,900 15

20 48.0 24,800 54.0 24,600 20

25 34.5 15,600 43.5 15,400 25

30 31.0 10,200 30

Min.Bm. 0.0 10,200 0.0 7,000 Min.Bm.Ang./Cap. (30.0) (34.5) Ang./Cap.

Load 50 Ft. 60.3 Ft. LoadRadius

(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 75.0 72,800 10

12 72.5 65,800 76.5 50,900 12

15 69.0 44,000 73.5 43,300 15

20 62.0 24,000 68.0 23,500 20

25 55.5 15,100 62.5 14,700 25

30 47.5 10,000 56.5 9,700 30

35 38.5 6,600 50.5 6,400 35

40 27.5 4,300 43.5 4,100 40

45 35.5 2,400 45

Min.Bm. 0.0 2,600 30.5 Min.Bm.Ang./Cap. (44.5) (47.8) Ang./Cap.

�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��

( ) Reference Radius for Min. Boom Angle Capacities (Shown In Parenthesis) Are In Feet.


For S

ales

Use

Onl

y!

�00��

MAIN BOOM“B”4,300# CTWT


INTERMEDIATE OUTRIGGERS


(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 68.0 84,100 70.5 37,900 74.5 37,900 10

12 64.5 76,000 67.5 37,900 72.5 37,900 12

15 58.5 45,400 62.5 37,900 68.5 37,900 15

20 48.0 24,800 53.5 25,400 62.0 25,900 20

25 34.5 15,600 43.5 16,100 55.0 16,800 25

30 31.0 10,800 47.5 11,500 30

35 38.5 8,100 35

40 27.5 5,700 40

Min.Bm. 0.0 10,200 0.0 7,600 0.0 4,100 Min.Bm.Ang./Cap. (30.0) (34.5) (44.5) Ang./Cap.


(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 77.5 37,900 10

12 76.0 37,900 78.0* 37,900 12

15 73.0 37,900 76.0 37,900 78.0* 35,400 15

20 67.5 26,200 71.0 26,400 74.0 26,500 20

25 62.0 17,100 66.5 17,300 70.0 17,400 25

30 56.0 11,900 62.0 12,100 66.0 12,200 30

35 50.0 8,600 57.0 8,800 62.0 9,000 35

40 43.0 6,200 51.5 6,400 57.5 6,600 40

45 35.0 4,400 46.0 4,700 53.0 4,900 45

50 24.5 3,000 39.5 3,300 48.0 3,500 50

55 32.5 2,300 43.0 2,400 55

60 37.0 1,600 60

Min.Bm. 0.0 2,000 22.5 35.0 Min.Bm.Ang./Cap. (54.5) (60.2) (61.7) Ang./Cap.

�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��




For S

ales

Use

Onl

y!

��0��


“B”INTERMEDIATE OUTRIGGERS 4,300# CTWT

Load 90 Ft. 100 Ft. LoadRadius

(Ft.) � ° 360° � ° 360°Radius

(Ft.)

20 76.5 26,600 20

25 73.0 17,500 75.5 17,600 25

30 69.5 12,300 72.0 12,400 30

35 65.5 9,100 68.5 9,100 35

40 62.0 6,700 65.5 6,800 40

45 58.0 5,000 62.0 5,100 45

50 54.0 3,700 58.5 3,800 50

55 50.0 2,600 55.0 2,700 55

60 45.5 1,700 51.0 1,800 60

Min.Bm. 42.5 48.0 Min.Bm.Ang./Cap. (62.8) (63.7) Ang./Cap.

�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

�0��



For S

ales

Use

Onl

y!

��0<��




(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 68.0 84,100 70.5 80,900 10

12 64.5 76,000 67.5 73,200 12

15 58.5 52,000 62.5 51,400 15

20 48.0 28,900 54.0 28,600 20

25 34.5 18,500 43.5 18,300 25

30 31.0 12,500 30



(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 75.0 72,800 10

12 72.5 65,800 76.5 50,900 12

15 69.0 50,500 73.5 47,300 15

20 62.5 28,000 68.0 27,500 20

25 55.5 18,000 62.5 17,600 25

30 47.5 12,200 56.5 12,000 30

35 38.5 8,500 50.5 8,300 35

40 27.5 5,900 43.5 5,700 40

45 35.5 3,800 45

50 25.5 2,300 50


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

�0��





(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 68.0 84,100 70.5 37,900 74.5 37,900 10

12 64.5 76,000 67.5 37,900 72.5 37,900 12

15 58.5 52,000 62.5 37,900 69.0 37,900 15

20 48.0 28,900 54.0 29,400 62.0 29,900 20

25 34.5 18,500 43.5 19,000 55.0 19,700 25

30 31.0 13,100 47.5 13,800 30

35 38.5 10,000 35

40 27.5 7,300 40



(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 77.5 37,900 10

12 76.0 37,900 78.0* 37,900 12

15 73.0 37,900 76.0 37,900 78.0* 35,400 15

20 67.5 30,200 71.5 30,400 74.5 30,600 20

25 62.0 20,000 66.5 20,200 70.5 20,300 25

30 56.0 14,200 62.0 14,400 66.0 14,500 30

35 50.0 10,400 57.0 10,700 62.0 10,800 35

40 43.0 7,800 52.0 8,000 57.5 8,200 40

45 35.0 5,800 46.0 6,100 53.0 6,300 45

50 25.0 4,300 40.0 4,500 48.5 4,700 50

55 32.5 3,300 43.0 3,500 55

60 23.0 2,400 37.0 2,600 60

65 30.5 1,800 65

Min.Bm. 0.0 3,100 0.0 1,600 23.5 Min.Bm.Ang./Cap. (54.5) (64.5) (69.0) Ang./Cap.

�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��




For S

ales

Use

Onl

y!

��0B��





(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

20 77.0 28,900 20

25 73.0 20,400 75.5 20,500 77.5 19,500 25

30 69.5 14,600 72.0 14,700 74.5 14,700 30

35 66.0 10,900 69.0 11,000 71.5 11,100 35

40 62.0 8,300 65.5 8,400 68.5 8,400 40

45 58.5 6,400 62.0 6,500 65.5 6,500 45

50 54.5 4,900 59.0 5,000 62.5 5,000 50

55 50.0 3,700 55.0 3,800 59.0 3,900 55

60 45.5 2,700 51.5 2,800 56.0 2,900 60

65 40.5 1,900 47.5 2,000 52.5 2,100 65

70 43.0 1,300 49.0 1,400 70

Min.Bm. 34.5 42.0 47.5 Min.Bm.Ang./Cap. (70.3) (70.8) (71.8) Ang./Cap.

�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��



For S

ales

Use

Onl

y!

��




(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 68.0 84,100 70.5 80,900 10

12 64.5 76,000 67.5 73,200 12

15 58.5 58,600 62.5 58,000 15

20 48.0 32,900 54.0 32,700 20

25 34.5 21,400 43.5 21,300 25

30 31.0 14,800 30



(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 75.0 72,800 10

12 72.5 65,800 76.5 50,900 12

15 69.0 57,100 73.5 47,300 15

20 62.5 32,100 68.0 31,600 20

25 55.5 20,900 62.5 20,500 25

30 47.5 14,500 56.5 14,300 30

35 39.0 10,400 50.5 10,200 35

40 27.5 7,500 43.5 7,300 40

45 35.5 5,200 45

50 25.5 3,500 50




For S

ales

Use

Onl

y!

��





(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 68.0 84,100 70.5 37,900 74.5 37,900 10

12 64.5 76,000 67.5 37,900 72.5 37,900 12

15 58.5 58,600 62.5 37,900 69.0 37,900 15

20 48.0 32,900 54.0 33,400 62.0 34,000 20

25 34.5 21,400 43.5 21,900 55.5 22,600 25

30 31.0 15,400 47.5 16,100 30

35 38.5 11,900 35

40 27.5 8,900 40



(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 77.5 37,900 10

12 76.0 37,900 78.0* 37,900 12

15 73.0 37,900 76.0 37,900 78.0* 35,400 15

20 67.5 34,300 71.5 34,500 74.5 34,600 20

25 62.0 22,900 67.0 23,100 70.5 23,300 25

30 56.5 16,500 62.0 16,700 66.5 16,800 30

35 50.0 12,300 57.0 12,500 62.0 12,700 35

40 43.0 9,300 52.0 9,600 58.0 9,800 40

45 35.0 7,200 46.0 7,400 53.0 7,600 45

50 25.0 5,500 40.0 5,800 48.5 6,000 50

55 32.5 4,400 43.0 4,600 55

60 23.0 3,400 37.5 3,600 60

65 30.5 2,700 65

70 21.5 1,900 70





For S

ales

Use

Onl

y!

��





(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

20 77.0 28,900 20

25 73.5 23,400 76.0 23,300 77.5 19,500 25

30 69.5 16,900 72.5 17,000 75.0 17,000 30

35 66.0 12,700 69.0 12,800 71.5 12,900 35

40 62.5 9,900 66.0 10,000 68.5 10,000 40

45 58.5 7,800 62.5 7,800 65.5 7,900 45

50 54.5 6,100 59.0 6,200 62.5 6,300 50

55 50.0 4,800 55.5 4,900 59.5 5,000 55

60 45.5 3,700 51.5 3,800 56.0 3,900 60

65 40.5 2,800 47.5 2,900 52.5 3,000 65

70 35.0 2,100 43.5 2,200 49.0 2,200 70

75 29.0 1,400 38.5 1,500 45.5 1,600 75


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��0��



For S

ales

Use

Onl

y!

��




(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 68.0 84,100 70.5 80,900 10

12 64.5 76,000 67.5 73,200 12

15 58.5 65,100 62.5 63,600 15

20 48.0 36,900 54.0 36,700 20

25 34.5 24,300 43.5 24,100 25

30 31.0 17,000 30



(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 75.0 72,800 10

12 72.5 65,800 76.5 50,900 12

15 69.0 57,700 73.5 47,300 15

20 62.5 36,100 68.0 35,600 20

25 55.5 23,800 62.5 23,400 25

30 47.5 16,800 57.0 16,600 30

35 39.0 12,200 50.5 12,000 35

40 27.5 9,100 43.5 8,900 40

45 36.0 6,600 45

50 25.5 4,800 50




For S

ales

Use

Onl

y!

��





(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 68.0 84,100 70.5 37,900 74.5 37,900 10

12 64.5 76,000 67.5 37,900 72.5 37,900 12

15 58.5 65,100 62.5 37,900 69.0 37,900 15

20 48.0 36,900 54.0 37,500 62.5 37,900 20

25 34.5 24,300 43.5 24,800 55.5 25,500 25

30 31.0 17,700 47.5 18,400 30

35 38.5 13,700 35

40 27.5 10,500 40

Min.Bm. 0.0 17,000 0.0 13,300 0.0 8,300 Min.Bm.Ang./Cap.

(30.0) (34.5) (44.5) Ang./Cap.


(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 77.5 37,900 10

12 76.0 37,900 78.0* 37,900 12

15 73.0 37,900 76.0 37,900 78.0* 35,400 15

20 67.5 37,900 71.5 37,900 74.5 34,700 20

25 62.0 25,800 67.0 26,000 70.5 26,100 25

30 56.5 18,800 62.0 19,000 66.5 19,100 30

35 50.0 14,100 57.0 14,400 62.0 14,500 35

40 43.0 10,900 52.0 11,200 58.0 11,400 40

45 35.0 8,500 46.0 8,800 53.5 9,000 45

50 25.0 6,700 40.0 7,000 48.5 7,200 50

55 32.5 5,500 43.5 5,700 55

60 23.0 4,300 37.5 4,500 60

65 30.5 3,600 65

70 21.5 2,700 70




For S

ales

Use

Onl

y!

��<��





(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

20 77.0 28,900 20

25 73.5 26,200 76.0 24,000 77.5 19,500 25

30 70.0 19,200 72.5 19,200 75.0 19,300 30

35 66.0 14,600 69.5 14,700 72.0 14,700 35

40 62.5 11,500 66.0 11,600 69.0 11,600 40

45 58.5 9,200 62.5 9,200 66.0 9,300 45

50 54.5 7,300 59.0 7,400 63.0 7,500 50

55 50.5 5,900 55.5 6,000 59.5 6,100 55

60 46.0 4,700 51.5 4,800 56.5 4,900 60

65 41.0 3,700 48.0 3,800 53.0 3,900 65

70 35.5 2,900 43.5 3,000 49.5 3,100 70

75 29.0 2,200 39.0 2,300 45.5 2,400 75

80 20.5 1,600 33.5 1,700 41.5 1,800 80

85 27.5 1,200 37.0 1,200 85


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��

28.5 Ft. Offset Fly

90 Ft. Main Boom

2� Offset

40� Offset

20�Offset

15,100# CTWT




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

30 77.0 16,900 30

35 74.5 14,200 35

40 71.5 12,500 75.5 10,600 40

45 69.0 10,200 73.0 10,100 76.5 7,900 45

50 66.0 8,300 70.5 9,200 73.5 7,700 50

55 63.0 6,900 67.5 7,600 71.0 7,400 55

60 60.0 5,700 64.0 6,300 68.0 6,900 60

65 57.0 4,700 61.0 5,300 64.5 5,700 65

70 53.5 3,800 57.5 4,400 61.0 4,800 70

75 50.5 3,100 54.5 3,600 57.5 3,900 75

80 47.0 2,500 50.5 2,900 53.5 3,200 80

85 43.0 2,000 47.0 2,300 49.5 2,500 85

90 39.0 1,500 43.0 1,800 44.5 2,000 90

95 34.5 1,100 38.0 1,300 95

�"�"��"'�$12�3��+��)*��"$6��"+��"��)"'::�8°� ��""(��)��)�++� ��""(

��+9;��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��


For S

ales

Use

Onl

y!

��B��

28.5 Ft. Offset Fly

110 Ft. Main Boom

2� Offset

40� Offset

20�Offset

15,100# CTWT




(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

35 77.0 9,400 35

40 75.5 9,400 40

45 73.5 9,400 77.0 9,600 45

50 71.0 8,100 75.0 9,100 78.0* 7,600 50

55 68.5 6,700 72.5 7,500 75.5 7,400 55

60 66.0 5,500 70.0 6,200 73.5 6,800 60

65 63.5 4,500 67.0 5,100 70.5 5,700 65

70 61.0 3,700 64.5 4,200 67.5 4,700 70

75 58.0 3,000 62.0 3,500 65.0 3,900 75

80 55.5 2,400 59.0 2,800 62.0 3,200 80

85 52.5 1,800 56.0 2,200 59.0 2,500 85

90 49.5 1,400 53.0 1,700 55.5 2,000 90

95 50.0 1,300 52.5 1,500 95

�"�"��"'�$12�3��+��)*��"$6��"+��"��)"'72�8°� ��""(��)��)�++� ��""(

��+9;��$��++5��,��"++�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��



For S

ales

Use

Onl

y!

��

Rated Lifting Capacities In Pounds MAIN BOOM

“A”RETRACTED OUTRIGGERS 7,900 # CTWT


(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 68.0 43,700 70.5 43,200 10

12 64.0 31,300 67.5 30,900 12

15 58.5 20,800 62.5 20,500 15

20 48.0 11,800 53.5 11,700 20

25 34.5 7,100 43.5 6,900 25

30 31.0 4,000 30



(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 75.0 42,300 10

12 72.5 30,200 76.0 29,600 12

15 68.5 20,000 72.5 19,600 15

20 62.0 11,300 67.5 11,100 20

25 55.0 6,700 62.0 6,400 25

30 47.5 3,700 56.5 3,600 30

35 38.5 1,700 50.0 1,600 35


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��

Rated Lifting Capacities In Pounds

RETRACTED OUTRIGGERS 7,900 # CTWTMAIN BOOM

“B”


(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 68.0 43,700 70.5 37,900 10

12 64.0 31,300 67.5 31,700 12

15 58.5 20,800 62.5 21,200 15

20 48.0 11,800 53.5 12,200 20

25 34.5 7,100 43.5 7,500 25

30 31.0 4,500 30



(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 74.5 37,900 77.5 37,900 10

12 72.5 32,100 75.5 32,400 78.0* 32,600 12

15 68.5 21,800 72.5 22,100 75.5 22,200 15

20 62.0 12,900 67.0 13,200 71.0 13,400 20

25 55.0 8,100 62.0 8,500 66.5 8,800 25

30 47.5 5,100 56.0 5,500 61.5 5,800 30

35 38.5 3,100 50.0 3,500 56.5 3,700 35

40 27.0 1,600 43.0 2,000 51.5 2,300 40

45 46.0 1,200 45


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��




For S

ales

Use

Onl

y!

��




(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 68.0 50,600 70.5 50,000 10

12 64.0 36,400 67.5 36,100 12

15 58.5 24,500 62.5 24,300 15

20 48.0 14,500 53.5 14,300 20

25 34.5 9,100 43.5 8,900 25

30 31.0 5,600 30



(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 75.0 49,200 10

12 72.5 35,300 76.0 34,800 12

15 68.5 23,800 73.0 23,400 15

20 62.0 13,900 67.5 13,700 20

25 55.0 8,700 62.0 8,500 25

30 47.5 5,400 56.5 5,200 30

35 38.5 3,100 50.0 3,000 35

40 27.5 1,500 43.5 1,300 40


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

�� 0��

RETRACTED OUTRIGGERSMAIN BOOM

“B”11,500# CTWT



(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 68.0 50,600 70.5 37,900 74.5 37,900 10

12 64.0 36,400 67.5 36,800 72.5 37,300 12

15 58.5 24,500 62.5 25,000 68.5 25,600 15

20 48.0 14,500 53.5 14,900 62.0 15,500 20

25 34.5 9,100 43.5 9,500 55.0 10,100 25

30 31.0 6,200 47.5 6,800 30

35 38.5 4,500 35

40 27.0 2,800 40



(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 77.5 37,900 10

12 75.5 37,600 78.0* 37,800 12

15 72.5 25,800 75.5 26,000 77.5 26,100 15

20 67.5 15,900 71.0 16,000 73.5 16,200 20

25 62.0 10,500 66.5 10,800 70.0 10,900 25

30 56.0 7,200 61.5 7,400 66.0 7,600 30

35 50.0 4,900 57.0 5,100 61.5 5,300 35

40 43.0 3,200 51.5 3,500 57.5 3,600 40

45 35.0 1,900 46.0 2,200 53.0 2,400 45

50 39.5 1,200 48.0 1,400 50


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��




For S

ales

Use

Onl

y!

��




(Ft.) � ° 360° � ° 360°Radius

(Ft.)

10 68.0 57,500 70.5 56,900 10

12 64.0 41,700 67.5 41,300 12

15 58.5 28,400 62.5 28,100 15

20 48.0 17,100 53.5 16,900 20

25 34.5 11,100 43.5 11,000 25

30 31.0 7,200 30


�"�"�� +��""(�!"#�94��$��+��"++�� ,6' $&�� !�)��*��))�,,%$� %+��--��

�"�&��"��

��


(Ft.) � ° 360° � ° 360°Radius

(Ft.)

15 68.5 27,600 15

20 62.0 16,600 67.5 16,300 20

25 55.0 10,700 62.0 10,500 25

30 47.5 7,000 56.5 6,800 30

35 38.5 4,500 50.5 4,300 35

40 27.5 2,700 43.5 2,500 40

45 35.5 1,100 45


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��

RETRACTED OUTRIGGERSMAIN BOOM

“B”15,100# CTWT



(Ft.) � ° 360° � ° 360° � ° 360°Radius

(Ft.)

10 68.0 57,500 70.5 37,900 10

12 64.0 41,700 67.5 37,900 12

15 58.5 28,400 62.5 28,800 68.5 29,400 15

20 48.0 17,100 53.5 17,500 62.0 18,100 20

25 34.5 11,100 43.5 11,500 55.0 12,100 25

30 31.0 7,800 47.5 8,400 30

35 38.5 5,900 35

40 27.5 4,000 40


�"�"�� +��""(�!"#�94��$��+��"++�� ,6' $&�� !�)��*��))�,,%$� %+��--��

�"�&��"��

��

Load 60 Ft. 70 Ft. 80 Ft. 90 Ft. LoadRadius

(Ft.) � ° 360° � ° 360° � ° 360° � ° 360°Radius

(Ft.)

20 67.5 18,500 20

25 62.0 12,500 66.5 12,800 70.0 12,900 25

30 56.0 8,800 61.5 9,100 66.0 9,200 69.0 9,300 30

35 50.0 6,200 57.0 6,500 61.5 6,700 65.5 6,800 35

40 43.0 4,400 51.5 4,600 57.5 4,800 62.0 5,000 40

45 35.0 3,000 46.0 3,200 53.0 3,400 58.0 3,600 45

50 24.5 1,900 39.5 2,100 48.0 2,300 54.0 2,500 50

55 32.5 1,200 43.0 1,400 50.0 1,600 55

Min.Bm. 0.0 1,000 27.0 38.0 45.0 Min.Bm.

Ang./Cap.

(54.5) (58.1) (59.3) (60.2) Ang./Cap.

�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��<��

MAIN BOOM“A”ON TIRES

Rated Lifting Capacities In PoundsStationaryBoom Centered Over Rear

4,300# CTWT


(Ft.) � ° Load � ° LoadRadius

(Ft.)

10 68.0 43,300 10

12 64.0 43,300 67.5 32,800 12

15 58.5 30,000 62.5 29,800 15

20 48.0 18,700 53.5 18,600 20

25 34.5 12,700 43.5 12,500 25

30 31.0 8,800 30




(Ft.)

15 68.5 18,300 15

20 62.0 18,300 67.5 12,100 20

25 55.0 12,300 62.0 12,100 25

30 47.5 8,600 56.5 8,400 30

35 38.5 6,000 50.5 5,900 35

40 27.5 4,200 43.5 4,000 40

45 35.5 2,600 45


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��

MAIN BOOM“B”ON TIRES 4,300# CTWT



(Ft.) � ° Load � ° Load � ° LoadRadius

(Ft.)

10 68.0 43,300 10

12 64.0 43,300 67.5 37,900 12

15 58.5 30,000 62.5 30,400 68.5 19,600 15

20 48.0 18,700 53.5 19,100 62.0 19,600 20

25 34.5 12,700 43.5 13,000 55.0 13,600 25

30 31.0 9,300 47.5 9,800 30

35 38.5 7,200 35

40 27.5 5,300 40



(Ft.) � ° Load � ° Load � ° Load

Radius(Ft.)

20 67.5 13,900 20

25 62.0 13,900 66.5 10,400 25

30 56.0 10,100 62.0 10,400 66.0 10,500 30

35 50.0 7,500 57.0 7,800 62.0 7,900 35

40 43.0 5,700 51.5 5,900 57.5 6,000 40

45 35.0 4,200 46.0 4,500 53.0 4,600 45

50 24.5 3,100 39.5 3,300 48.0 3,500 50

55 32.5 2,400 43.0 2,600 55

60 23.0 1,700 37.0 1,800 60


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��B��

MAIN BOOM“A”ON TIRES

Rated Lifting Capacities In PoundsPick & Carry – 1 MPHBoom Centered Over Rear

4,300# CTWT



(Ft.)

10 68.0 36,200 10

12 64.0 33,000 67.5 32,800 12

15 58.5 28,800 62.5 28,700 15

20 48.0 18,700 53.5 18,600 20

25 34.5 12,700 43.5 12,500 25

30 31.0 8,800 30




(Ft.)

15 68.5 18,300 15

20 62.0 18,300 67.5 12,100 20

25 55.0 12,300 62.0 12,100 25

30 47.5 8,600 56.5 8,400 30

35 38.5 6,000 50.5 5,900 35

40 27.5 4,200 43.5 4,000 40

45 35.5 2,600 45


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

�� <��





(Ft.)

10 68.0 36,200 10

12 64.0 33,000 67.5 33,100 12

15 58.5 28,800 62.5 29,000 68.5 19,600 15

20 48.0 18,700 53.5 19,100 62.0 19,600 20

25 34.5 12,700 43.5 13,000 55.0 13,600 25

30 31.0 9,300 47.5 9,800 30

35 38.5 7,200 35

40 27.5 5,300 40




(Ft.)

20 67.5 13,900 20

25 62.0 13,900 66.5 10,400 25

30 56.0 10,100 62.0 10,400 66.0 10,500 30

35 50.0 7,500 57.0 7,800 62.0 7,900 35

40 43.0 5,700 51.5 5,900 57.5 6,000 40

45 35.0 4,200 46.0 4,500 53.0 4,600 45

50 24.5 3,100 39.5 3,300 48.0 3,500 50

55 32.5 2,400 43.0 2,600 55

60 23.0 1,700 37.0 1,800 60


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��<��

MAIN BOOM“A”ON TIRES 7,900# CTWT




(Ft.)

10 68.0 49,000 10

12 64.0 44,800 67.5 33,300 12

15 58.5 33,500 62.5 33,300 15

20 48.0 21,200 53.5 21,000 20

25 34.5 14,500 43.5 14,400 25

30 31.0 10,300 30




(Ft.)

15 68.5 20,700 15

20 62.0 20,700 67.5 14,000 20

25 55.0 14,100 62.5 14,000 25

30 47.5 10,100 56.5 9,900 30

35 38.5 7,300 50.5 7,200 35

40 27.5 5,300 43.5 5,100 40

45 35.5 3,600 45

50 25.5 2,400 50


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

�� <��





(Ft.)

10 68.0 49,000 10

12 64.0 44,800 67.5 37,900 12

15 58.5 33,500 62.5 33,900 68.5 22,100 15

20 48.0 21,200 53.5 21,500 62.0 22,100 20

25 34.5 14,500 43.5 14,900 55.0 15,400 25

30 31.0 10,800 47.5 11,300 30

35 38.5 8,500 35

40 27.5 6,400 40




(Ft.)

20 67.5 15,700 20

25 62.0 15,700 66.5 11,800 25

30 56.0 11,600 62.0 11,800 66.0 12,000 30

35 50.0 8,800 57.0 9,000 62.0 9,200 35

40 43.0 6,800 51.5 7,000 57.5 7,100 40

45 35.0 5,200 46.0 5,400 53.0 5,600 45

50 25.0 4,000 40.0 4,200 48.5 4,300 50

55 32.5 3,200 43.0 3,400 55

60 23.0 2,400 37.0 2,500 60

65 30.5 1,900 65

70 21.5 1,300 70


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��<��





(Ft.)

10 68.0 36,200 10

12 64.0 33,000 67.5 32,800 12

15 58.5 28,800 62.5 28,700 15

20 48.0 21,200 53.5 21,000 20

25 34.5 14,500 43.5 14,400 25

30 31.0 10,300 30




(Ft.)

15 68.5 20,700 15

20 62.0 20,700 67.5 14,000 20

25 55.0 14,100 62.5 14,000 25

30 47.5 10,100 56.5 9,900 30

35 38.5 7,300 50.5 7,200 35

40 27.5 5,300 43.5 5,100 40

45 35.5 3,600 45

50 25.5 2,400 50


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

�� <0��





(Ft.)

10 68.0 36,200 10

12 64.0 33,000 67.5 33,100 12

15 58.5 28,800 62.5 29,000 68.5 22,100 15

20 48.0 21,200 53.5 21,500 62.0 22,100 20

25 34.5 14,500 43.5 14,900 55.0 15,400 25

30 31.0 10,800 47.5 11,300 30

35 38.5 8,500 35

40 27.5 6,400 40




(Ft.)

20 67.5 15,700 20

25 62.0 15,700 66.5 11,800 25

30 56.0 11,600 62.0 11,800 66.0 12,000 30

35 50.0 8,800 57.0 9,000 62.0 9,200 35

40 43.0 6,800 51.5 7,000 57.5 7,100 40

45 35.0 5,200 46.0 5,400 53.0 5,600 45

50 25.0 4,000 40.0 4,200 48.5 4,300 50

55 32.5 3,200 43.0 3,400 55

60 23.0 2,400 37.0 2,500 60

65 30.5 1,900 65

70 21.5 1,300 70


�"�"��"'�$��""(��)"'��(%(�""(��)��"$��""(��+��"'�5��,��"++��

�� !�)��*��))�,,%$� %+��--��"�&��"��

��



For S

ales

Use

Onl

y!

��<��





(Ft.)

10 68.0 49,000 10

12 64.0 44,800 67.5 36,800 12

15 58.5 37,000 62.5 36,800 15

20 48.0 23,600 53.5 23,400 20

25 34.5 16,400 43.5 16,200 25

30 31.0 11,800 30




(Ft.)

15 69.0 23,100 15

20 62.0 23,100 68.0 15,800 20

25 55.5 16,000 62.5 15,800 25

30 47.5 11,600 56.5 11,400 30

35 38.5 8,600 50.5 8,400 35

40 27.5 6,400 43.5 6,200 40

45 35.5 4,600 45

50 25.5 3,200 50




For S

ales

Use

Onl

y!

�� <��





(Ft.)

10 68.0 49,000 10

12 64.0 44,800 67.5 37,900 12

15 58.5 37,000 62.5 37,400 68.5 24,500 15

20 48.0 23,600 53.5 23,900 62.0 24,500 20

25 34.5 16,400 43.5 16,700 55.0 17,300 25

30 31.0 12,300 47.5 12,800 30

35 38.5 9,700 35

40 27.5 7,500 40




(Ft.)

20 67.5 17,600 20

25 62.0 17,600 66.5 13,300 25

30 56.0 13,100 62.0 13,300 66.0 13,200 30

35 50.0 10,100 57.0 10,300 62.0 10,500 35

40 43.0 7,800 52.0 8,100 57.5 8,200 40

45 35.0 6,200 46.0 6,400 53.0 6,500 45

50 25.0 4,800 40.0 5,000 48.5 5,200 50

55 32.5 4,000 43.0 4,100 55

60 23.0 3,100 37.5 3,200 60

65 30.5 2,500 65

70 21.5 1,900 70




For S

ales

Use

Onl

y!

��<<��





(Ft.)

10 68.0 36,200 10

12 64.0 32,900 67.5 32,800 12

15 58.5 28,800 62.5 28,700 15

20 48.0 23,500 53.5 23,400 20

25 34.5 16,400 43.5 16,200 25

30 31.0 11,800 30




(Ft.)

15 68.5 23,100 15

20 62.0 23,100 68.0 15,800 20

25 55.5 16,000 62.5 15,800 25

30 47.5 11,600 56.5 11,400 30

35 38.5 8,600 50.5 8,400 35

40 27.5 6,400 43.5 6,200 40

45 35.5 4,600 45

50 25.5 3,200 50




For S

ales

Use

Onl

y!

�� <��





(Ft.)

10 68.0 36,200 10

12 64.0 32,900 67.5 33,100 12

15 58.5 28,800 62.5 29,000 68.5 24,000 15

20 48.0 23,500 53.5 23,700 62.0 24,000 20

25 34.5 16,400 43.5 16,700 55.0 17,300 25

30 31.0 12,300 47.5 12,800 30

35 38.5 9,700 35

40 27.5 7,500 40




(Ft.)

20 67.5 17,600 20

25 62.0 17,600 66.5 13,300 25

30 56.0 13,100 62.0 13,300 66.0 13,200 30

35 50.0 10,100 57.0 10,300 62.0 10,500 35

40 43.0 7,800 52.0 8,100 57.5 8,200 40

45 35.0 6,200 46.0 6,400 53.0 6,500 45

50 25.0 4,800 40.0 5,000 48.5 5,200 50

55 32.5 4,000 43.0 4,100 55

60 23.0 3,100 37.5 3,200 60

65 30.5 2,500 65

70 21.5 1,900 70




For S

ales

Use

Onl

y!

��<B��

MAIN BOOM“A”ON TIRES 15,100 # CTWT




(Ft.)

10 68.0 49,000 10

12 64.0 44,800 67.5 44,700 12

15 58.5 39,600 62.5 39,400 15

20 48.0 26,000 54.0 25,800 20

25 34.5 18,200 43.5 18,100 25

30 31.0 13,300 30




(Ft.)

15 69.0 25,500 15

20 62.5 25,500 68.0 17,700 20

25 55.5 17,900 62.5 17,700 25

30 47.5 13,100 56.5 12,900 30

35 39.0 9,800 50.5 9,700 35

40 27.5 7,400 43.5 7,300 40

45 36.0 5,500 45

50 25.5 4,100 50




For S

ales

Use

Onl

y!

��

MAIN BOOM“B”ON TIRES 15,100 # CTWT




(Ft.)

10 68.0 49,000 10

12 64.0 44,800 67.5 37,900 12

15 58.5 39,600 62.5 37,900 68.5 29,200 15

20 48.0 26,000 54.0 26,300 62.0 26,900 20

25 34.5 18,200 43.5 18,600 55.0 19,100 25

30 31.0 13,800 47.5 14,300 30

35 38.5 11,000 35

40 27.5 8,600 40




(Ft.)

20 67.5 19,500 20

25 62.0 19,500 66.5 14,800 25

30 56.0 14,600 62.0 14,800 66.0 14,200 30

35 50.0 11,300 57.0 11,600 62.0 11,700 35

40 43.0 8,900 52.0 9,200 57.5 9,300 40

45 35.0 7,100 46.0 7,300 53.0 7,500 45

50 25.0 5,700 40.0 5,900 48.5 6,100 50

55 32.5 4,700 43.0 4,900 55

60 23.0 3,800 37.5 4,000 60

65 30.5 3,200 65

70 21.5 2,500 70




For S

ales

Use

Onl

y!

��

MAIN BOOM“A”ON TIRES 15,100 # CTWT




(Ft.)

10 68.0 36,100 10

12 64.0 32,900 67.5 32,800 12

15 58.5 28,800 62.5 28,700 15

20 48.0 23,500 53.5 23,400 20

25 34.5 18,200 43.5 18,100 25

30 31.0 13,300 30




(Ft.)

15 68.5 23,200 15

20 62.0 23,200 68.0 17,700 20

25 55.5 17,900 62.5 17,700 25

30 47.5 13,100 56.5 12,900 30

35 39.0 9,800 50.5 9,700 35

40 27.5 7,400 43.5 7,300 40

45 36.0 5,500 45

50 25.5 4,100 50




For S

ales

Use

Onl

y!

��

MAIN BOOM“B”ON TIRES 15,100 # CTWT




(Ft.)

10 68.0 36,100 10

12 64.0 32,900 67.5 33,100 12

15 58.5 28,800 62.5 29,000 68.5 29,200 15

20 48.0 23,500 53.5 23,700 62.0 24,000 20

25 34.5 18,200 43.5 18,600 55.0 19,100 25

30 31.0 13,800 47.5 14,300 30

35 38.5 11,000 35

40 27.5 8,600 40




(Ft.)

20 67.5 19,500 20

25 62.0 19,500 66.5 14,800 25

30 56.0 14,600 62.0 14,800 66.0 14,200 30

35 50.0 11,300 57.0 11,600 62.0 11,700 35

40 43.0 8,900 52.0 9,200 57.5 9,300 40

45 35.0 7,100 46.0 7,300 53.0 7,500 45

50 25.0 5,700 40.0 5,900 48.5 6,100 50

55 32.5 4,700 43.0 4,900 55

60 23.0 3,800 37.5 4,000 60

65 30.5 3,200 65

70 21.5 2,500 70



Date post:	10-May-2018
Category:	Documents
Upload:	nguyenkhue
View:	216 times
Download:	2 times

Telescopic Truck Crane - CraneDude · The New HTC-8650 telescopic truck crane features unmatched...

Documents