+ All Categories
Home > Documents > TERGO Commercial

TERGO Commercial

Date post: 23-Mar-2016
Category:
Upload: latre-geo-serv-sas
View: 221 times
Download: 1 times
Share this document with a friend
Description:
tergo, deumidificazione, risalita capillare, antimuffa, muri, muro, umidità, salute, bonifica, elettrofisico
Popular Tags:
4
DRY AND SAFE REMOVES HUMIDITY DEFINITIVELY AND PERMANENTLY THE WALL DEHUMIDIFIER TM
Transcript
Page 1: TERGO Commercial

DRY AND SAFE

REMOVES HUMIDITYDEFINITIVELY AND

PERMANENTLY

THE WALL DEHUMIDIFIER

TM

Page 2: TERGO Commercial

RISING DAMP

IS A WIDESPREAD PROBLEM AND DIFFICULT TO RESOLVEand one of the most dangerous and harmful agents for preserving and maintaining walls and buildings in good condition and for the welfare of the people whostay there.

LIFETIME WARRANTY ON

THE EFFECTIVENESS

NO BUILDIN

G

WO

RK

TO H

EALT

H

BEN

EFIC

IAL

MAINTENANCENO NEED FOREXPENSES ON PLASTER

STOPPING THE

TECHN

OLO

GYM

AD

E IN ITALY

COST

OF

ANNUAL

USE

ON

LY €

3

Because of its chemical nature, the water molecule constitutes a permanent electric dipole and the salts contained within the molecule give it the property to let the electric current through by ionic conduction. Thanks to this property, it is possible to generate a signal capable of blocking the capillary rise and dehumidify the wall structure...

FINALLY SOLVING THE PROBLEM.

THE tergo WALL DEHUMIDIFIER

The tergo active electrophysical system, is based on this principle and is developed from a certi�ed technology

that has been adopted for over ten years by public and private agencies in thousands of buildings. It is capable

of generating a polarising �eld at a distance, able to excite the water dipole as much as possible in order

to obtain the maximum displacement towards the ground.

The signal created by the bio-technology interacts with the water dipoles, allowing them to move towards the ground, de�nitively blocking rising damp and dehumidifying the walls.

The tergo system in de�nitive because it acts directly on the cause and is not invasive as it does not involve the insertion of wires, cables or electrodes within the walls.

DEFINITIVE SOLUTION

TO THE PROBLEM

Many attempts have been madeover the course of time to stem the problem but they have all proved extremely invasive and expensive and none of them has solved the problem decisively.

model 20With spherical radius up to 20 mit dehumidi�es a house of max700 square metres.

model 10With spherical radius up to 10 mit dehumidi�es a house of max170 square metres.

The range is spherical, therefore all the walls that are inside the sphere are dehumidi�ed (external walls, internal walls, �oors, underground structures and foundations).

BEFOREAFTER

Rising damp is connected to the phenomena of capillary rise in all the walls that are in direct contact with damp soil.

The salts coming from the water are deposited at di�erent heights, the saline products stay incorporated into the porosity of the material crystallising and causing considerable internal pressures.

As a result the following conditions occur corrosion to the surface of the bricks, impoverishment of the mortar joints, detachment of the plaster parts and reduction of the mechanical properties of the materials.

THE WALL DEHUMIDIFIER

TM

Page 3: TERGO Commercial

TM

PROTECTYOUR CAPITAL

PRESERV YOURHOUSE FROM

HUMIDITY

PREVENTION

INSTANT block against rising dump!FOR THE WALFARE OF THE HOME AND FAMILYCHOOSE THE tergo WALL DEHUMIDIFIER• The most advanced system at the lowest price.

TM

THE WALL DEHUMIDIFIER

P U B L I C P R I V A T E

RESTORATION

THE WALL DEHUMIDIFIER has been the most widely adopted system against rising damp for over 10 years. It has been installed in churches, schools, municipal buildings, UNESCO heritage sites and thousands of private homes.

BEFORE AFTER

BEFORE AFTER BEFORE AFTER

Page 4: TERGO Commercial

THE tergo WALL DEHUMIDIFIER IS CERTIFIED.

CONFORMING TO:• CEI EN 55014-2 CE

• CEI EN 60335-1/A13 safety at home• CEI EN 61558-1 voltage

transformers safety• CEI EN 50492 exposure to electromagnetic

�elds• CEI EN 61000-3-3 EMC (emissions-immunity-

electromagnetic compatibility)• CEI EN 61439 heat generation of the UT

(equipment)

• Power supply 230 V - 50 HZ• Power consuption approx. 3 VA• Insulation class II according to the standardsCEI EN 60335-1• IP65 degree of protection according to the standards CEI EN 60529• Spherical radius of action from 10 to 20 mdepending on the model• Plug and play technology

Viale Italia, 2246100 - Mantova

[email protected]

21 cm

13 cm

7 cm

D I M E N S I O N S mod. 10 - 20

Copy

right

Idea

mar

coni

S.r.

l.

is a product

S.r.l.THE WALL DEHUMIDIFIER

TM

800-19 37 12

Made in Italy S.r.l.I L D E U M I D I F I C ATO R E M U R A R I O

TM

OK ER

Authorized dealer :


Recommended