DRY AND SAFE•

•

•

•

•

•

•

•

•

•

•

•

REMOVES HUMIDITYDEFINITIVELY AND

PERMANENTLY

THE WALL DEHUMIDIFIER

TM

RISING DAMP

IS A WIDESPREAD PROBLEM AND DIFFICULT TO RESOLVEand one of the most dangerous and harmful agents

for preserving and maintaining walls and buildings in

good condition and for the welfare of the people who

stay there.

EXPENSES ON PLASTER

STOPPING THE

TE

CH

NO

LOG

YM

AD

E IN

ITALY

CO

ST

OF

AN

NU

AL

US

E O

NLY

€ 3

DEFINITIVE SOLUTION

TO THE PROBLEM

Many attempts have been made

over the course of time to stem the

problem but they have all proved

extremely invasive and expensive

and none of them has solved the

problem decisively.

model 10With spherical radius up to 10 m

it dehumidi�es a house of max

170 square metres.

BEFORE

Rising damp is connected to the phenomena

of capillary rise in all the walls that are in

direct contact with damp soil.

The salts coming from the water are

deposited at di�erent heights, the saline

products stay incorporated into the porosity

of the material crystallising and causing

considerable internal pressures.

As a result the following conditions occur

corrosion to the surface of the bricks,

impoverishment of the mortar joints,

detachment of the plaster parts and

reduction of the mechanical properties

of the materials.

LIFETIME WARRANTY ON

THE EFFECTIVENESS

NO

BU

ILDIN

G

WO

RK

TO H

EA

LTH

BE

NE

FIC

IAL

MAINTENANCENO NEED FOR

Because of its chemical nature, the water molecule constitutes a

permanent electric dipole and the salts contained within the molecule

give it the property to let the electric current through by ionic conduction.

Thanks to this property, it is possible to generate a signal capable of blocking

the capillary rise and dehumidify the wall structure...

FINALLY SOLVING THE PROBLEM.

THE tergo WALL DEHUMIDIFIER

The tergo active electrophysical system, is based on this

principle and is developed from a certi�ed technology

that has been adopted for over ten years by public and

private agencies in thousands of buildings. It is capable

of generating a polarising �eld at a distance, able to

excite the water dipole as much as possible in order

to obtain the maximum displacement towards the

ground.

The signal created by the bio-technology

interacts with the water dipoles, allowing them

to move towards the ground, de�nitively

blocking rising damp and dehumidifying the

walls.

The tergo system in de�nitive because it acts

directly on the cause and is not invasive as it

does not involve the insertion of wires, cables

or electrodes within the walls.

model 20With spherical radius up to 20 m

it dehumidi�es a house of max

700 square metres.

The range is spherical, therefore all

the walls that are inside the sphere

are dehumidi�ed (external walls,

internal walls, �oors, underground

structures and foundations).

AFTER

THE WALL DEHUMIDIFIER

TM

TM

PROTECT

YOUR CAPITAL

PRESERV YOURHOUSE FROM

HUMIDITY

PREVENTION

INSTANT block against rising dump!FOR THE WALFARE OF THE HOME AND FAMILY

CHOOSE THE tergo WALL DEHUMIDIFIER

• The most advanced system at the lowest price.

TM

THE WALL DEHUMIDIFIER

o

P U B L I C P R I V A T E

RESTORATION

THE WALL DEHUMIDIFIER has

been the most widely adopted

system against rising damp for

over 10 years. It has been installed

in churches, schools, municipal

buildings, UNESCO heritage sites

and thousands of private homes.

BEFORE AFTER

BEFORE AFTER BEFORE AFTER

THE tergo WALL DEHUMIDIFIER

IS CERTIFIED.

CONFORMING TO:

• CEI EN 55014-2 CE

• CEI EN 60335-1/A13 safety at home• CEI EN 61558-1 voltage

transformers safety• CEI EN 50492 exposure to electromagnetic

�elds• CEI EN 61000-3-3 EMC (emissions-immunity-

electromagnetic compatibility)

• CEI EN 61439 heat generation of the UT(equipment)

• Power supply 230 V - 50 HZ• Power consuption approx. 3 VA• Insulation class II according to the standardsCEI EN 60335-1• IP65 degree of protection according to the standards CEI EN 60529• Spherical radius of action from 10 to 20 mdepending on the model• Plug and play technology

Viale Italia, 22

46100 - Mantova

info@ideamarconi.com

www.ideamarconi.com

21 cm

13 c

m

7 cm

D I M E N S I O N S mod. 10 - 20

Cop

yrig

ht

Idea

mar

coni S

.r.l.

is a product

S.r.l.THE WALL DEHUMIDIFIER

TM

800-19 37 12

Made in Italy S.r.l.I L D E U M I D I F I C ATO R E M U R A R I O

TM

OK ER