+ All Categories
Home > Documents > Test Requirements for OTDR, TR-12/24 and Fiber Reel

Test Requirements for OTDR, TR-12/24 and Fiber Reel

Date post: 14-Jan-2016
Category:
Upload: nerys
View: 28 times
Download: 5 times
Share this document with a friend
Description:
Test Requirements for OTDR, TR-12/24 and Fiber Reel. Vijay Jain DMTS – SIT Verizon Technology Organization E-mail: [email protected]. Test Requirements for OTDR. 1.0 Definitions: - PowerPoint PPT Presentation
15
© Verizon 2006, All Rights Reserved Information contained herein is subject to change Vijay Jain; 1 Test Requirements for OTDR, TR- 12/24 and Fiber Reel Vijay Jain DMTS – SIT Verizon Technology Organization E-mail: [email protected]
Transcript
Page 1: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 1

Test Requirements for OTDR, TR-12/24 and Fiber Reel

Vijay JainDMTS – SITVerizon Technology OrganizationE-mail: [email protected]

Page 2: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 2

Test Requirements for OTDR

1.0 Definitions:

Portable Use: A temporary installation of Test and Measurement Equipment that does not meet the definition for a permanent installation. A temporary installation includes hand held devices.

Controlled Environmental Location: Operating temperature range of 5 to 40 degrees C.

Uncontrolled Environmental Location: Operating temperature range of -40 to 46 degrees C.

Page 3: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 3

Test Requirements for OTDR

2.0 Portable Use Test and Measurement Equipment Qualification Test Requirements:

All portable use Test and Measurement Equipment shall comply with the following NEBS requirements:

a. GR-1089-CORE

3.2 EMI Emissions Criteria

3.3 EMI Immunity Criteria

b. GR-63-CORE

4.1.2 Operating Temperature and Humidity (for environmentally controlled locations only)

Page 4: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 4

Test Requirements for OTDR

Portable use Test and Measurement Equipment used in an environmentally uncontrolled environment, including hand-held devices, shall also comply with the following requirements:

c. GR-63-CORE

2.9.4 Non-Environmentally Controlled Equipment Housings (-40 degrees C to 46 degrees C with Solar Loading Operating Temperature Requirements)

Page 5: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 5

Test Requirements for OTDR

d. IEC 60068

68-2-32 Free Fall Tested at –18 degrees C (this test applies to hand-held devices only)

NOTE: Since temperature is not specified for this test, the low temperature requirement was selected based on GR-950-CORE R5-15 Vertical Drop for ONU Closures, since it is unlikely operators will be performing service calls and using hand-held Test and Measurement equipment at temperatures below –18 degrees C.

e. GR-196-CORE

• All applicable requirements

• A sample size of 3 shall be used for all the tests

Page 6: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 6

Overview of TR-12/24, Fiber Reel and OTDR

FTTP PON LayoutFTTP PON Layout

F1 (Facility 1)Fibers

FiberDistributionHub (FDH)

CO F2 Fibers

F2 Fibers

DropTerminal

DropTerminal

DropTerminal

DropTerminal

DropTerminal

DropTerminal

Page 7: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 7

Overview of TR-12/24, Fiber Reel and OTDR Continued …

CO

DropTerminalHub

(FDH)

OFL 200

Fiber RingTR

Page 8: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 8

Overview of TR-12/24, Fiber Reel and OTDR Continued …

Page 9: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 9

Overview of TR-12/24, Fiber Reel and OTDR Continued …

Page 10: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 10

Overview of TR-12/24, Fiber Reel and OTDR Continued …

Fiber Ring F2 FiberTR-xxFiber 1

Fiber 2

Fiber 3

Fiber 4

Fiber lengths in feet:

350, 450 … 1,450 (TR-12 and 24)

1550, 1650 … 2,650 (TR-24 only)

A B

100 ft increments

Page 11: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 11

Test Requirements for TR-12/24

Task Name # of Samples Optical M Test ConditionsTest # Environmental Performance

1 GR-1209 5.4.1.1: Temp Humidity Aging 3 Test samples B/D/A IL 75º C/90% Humidity, 7 days2 GR-1209 5.4.1.5: Temperature Cycling 3 Test samples B/D/A IL -40º C to 70º C3 GR-1209 5.4.2.2: Humidity/Condensation Cycle 3 Test samples B/D/A IL -40º C to 85ºC, Hum @ 20% to 85% (uncontrolled)

4GR-1209 5.4.1.2: Vibration Test 3 Test samples B/D/A IL 10-55 Hz, 1 hour, 1.52mm Amp, 3axes (20minutes/axis),

23CMechanical Performance

5GR-1209 5.4.1.4: Module Impact 3 Test samples B/D/A IL 200g, 3axes, 2impacts/direction (12 total), Nominal 1.33ms,

Half Sine Pulse6 GR-1209 5.4.2.3: Water Immersion 3 Test samples B/D/A IL +43C, pH5.5, 7 Days7 GR-13 3.25: Handling Shock 3 Test samples N/A Unpackaged Shock

8GR-771 6.3.6 Compression Test 2 Test samples N/A 300 lbs; 1@-40C and 1@40C both for 15 minutes. No

damage Chemical Testing

9 GR-771 5.4.10: Fungus Resistance 10 test bars N/A Casing material only

10GR-771 5.4.8.A Chemical Resistance - Stress

Cracking 10 test bars N/A Casing material only

11 GR-13 3.6.1: Color 2 Test sample N/A Casing material only12 GR-13 3.6.2: Appearance 2 Test sample N/A Casing material only13 GR-13 3.6.3: Scrape Adhesion 2 Test sample N/A Casing material only14 Must meet Verizon RFP and Industry requirement

Requires PFOC ITL tested GR20 fiber and Cable, GR326 Connector and GR-1222 Terminators

Test 1 to 4 must be performed in series on the same samples

NOTES:

IL -Insertion Loss; use OTDR based Switch system and monitor all the fibers

PFOC Test Program for TR12/24

Documentation, storage, handling & Labeling

B/A Before and After Optical Testing at (1310, 1490, 1550, 1625)D - During Test Optical Testing at (1310, 1490, 1550, 1625)

Page 12: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 12

Test Requirements for Fiber Reel

Task Name # of Samples Optical M Test ConditionsTest # Environmental Performance

1GR-326 4.4.2.1: Thermal Aging 11 Test/ 2 Hot

SpareB/D/A IL 85º C, 7 days

2GR-326 4.4.2.2: Thermal Cycle 11 Test/ 2 Hot

SpareB/D/A IL -40º C to 75º C, 7 days

3GR-326 4.4.2.3: Humidity Aging 11 Test/ 2 Hot

SpareB/D/A IL 75º C/ 95% Humidity, 7 days

4GR-326 4.4.2.4: Humidity/Condensation Cycle 11 Test/ 2 Hot

SpareB/D/A IL -10º C to 65ºC, Hum @ heat, 7 days

5GR-326 4.4.3.1: Vibration Test 11 Test/ 2 Hot

SpareB/D/A IL 0-55 Hz, 2 hours, 1 minute sinusoid, 23C

Mechanical Performance

6GR-326 4.4.3.2: Flex Test 11 Test/ 2 Hot

SpareB/D/A IL +/- 90 deg, 8 cycles, -40C/40C 10lbs

7GR-326 4.4.3.3: Twist 11 Test/ 2 Hot

SpareB/D/A IL +/- 90 deg, 10 cycles,-40C/40C

8GR-326 4.4.3.4: Proof Test 11 Test/ 2 Hot

SpareB/D/A IL 1min @100 lbs Req., 167lb Obj: 1min @ 25 lbs req, 50 lbs

objective; before & After 23C

9GR-326 4.4.3.5: Trans/w applied load 11 Test/ 2 Hot

SpareB/D/A IL 30 min @ 10 lbs@23C then -40ºC

10GR-326 4.4.3.7: Impact Test 11 Test/ 2 Hot

SpareB/D/A IL -40ºC; 15 foot drop 2 drops Vertical and 2 drops horizontal.

Matrix -20C, 0C

11Water Immersion with axial load 11 Test/ 2 Hot

SpareB/D/A IL R2.5 lbs O- 5lbs- 7 days, 23C, fully submersed

12GR-771 6.3.6 Compression Test 11 Test/ 2 Hot

SpareN/A 300 lbs; 6@-40C samples and 5@40C both for 15 minutes.

No damage

PFOC Test Program for Fiber Reel

Page 13: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 13

Test Requirements for Fiber Reel Continued …

Task Name # of Samples Optical M Test ConditionsTest # Environmental Performance

Chemical Testing13 GR-771 5.4.10: Fungus Resistance 10 test bars N/A Casing material only

14GR-771 5.4.8.A Chemical Resistance - Stress

Cracking 10 test bars N/A Casing material only

15GR-765 4.1.3 .1: Surface finish 1 sample per

chemicalN/A Casing material only

16 Must meet Verizon RFP and Industry requirement

B/A Before and After Optical Testing at (1310, 1490, 1550, 1625)D - During Test Optical Testing at (1310, 1490, 1550, 1625)IL -Insertion LossNo measurements required for Hot Spares

NOTESRequires PFOC ITL tested GR20 fiber and Cable, GR326 Connector

Documentation, storgae, handling & Labeling

Test 1 to 12 must be performed in series on the same samples

PFOC Test Program for Fiber Reel

Page 14: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 14

Q & A

Page 15: Test Requirements for OTDR, TR-12/24 and Fiber Reel

© Verizon 2006, All Rights Reserved

Information contained herein is subject to change without notice.Vijay Jain; 15


Recommended