Testo Leaflet 2015 Layout 1 - First Choice Group · Tel: 01543 577778 Fax: 01543 504141 Email:...

FIRST CHOICE CATERING SPARES LTD

DIGITALTECHNOLOGY

APRIL 2015

FS 622615

Tel: 01543 577778 Fax: 01543 504141 Email: [email protected] Web: www.firstchoice-cs.co.uk

Flue Gas Analyser FIRST CHOICE CATERING SPARES LTD

TESTO 310 FLUE GAS ANALYSERThe Testo 310 Flue Gas Analyser combines ease of use with a high level of accuracy, and is ideal for measuringthe performance of gas systems in commercial catering equipment, including COMCAT 5 forced draft burners, toensure compliance with Gas Safety (Installation and Use) Regulations 1998. Highly accurate sensors analyse theflue gas mixture and automatically calculate all relevant measurement parameters.

RobustRobust and light instrument fordaily use, excellently suitable evenfor rough and dirty surrounding.

Backlit DisplayMulti line display and clear menustructure make it simple to operateand easy to read.

Fast Sensor ZeroingAutomatic zeroing of the gas sensorin only 30 seconds after starting.

Lithium Rechargeable BatteryLithium rechargeable battery (1500mAh) with up to ten hours runningtime. Recharging via USB possible.

Probe FilterQuickly and easily exchangeable.

Magnetic AttachmentIntegrated magnets for easy fixing.

Condensate TrapIntegrated condensate trap that isquickly and easily emptied.

Optional PrinterAllows you to create clear reports onsite as required. Specially developedfor the 310, the thermal printer connects via an infrared interface.

The Testo 310 conforms to EN50379 and meets the requirements of engineers working to BS7967.

30SECONDS


FIRST CHOICE CATERING SPARES LTD Flue Gas Analyser

The Testo 310 has four core measurement menus: flue gas, ambient CO, draughtand pressure. The instrument has two measurement sensors for O2 and CO, anda temperature sensor integrated into the flue gas probe. The gas sensors measurethe exact oxygen and carbon monoxide content as well as the flue gas andambient temperature. From this data, all relevant measurement parameters suchas CO2 value, degree of effectivity and flue gas loss are calculated. The printer, specially developed for the Testo 310, including infrared interface, allowsyou to create clear reports on site as required. The current measurement valuecan be printed out of any measurement menu during or after the measurement. Accurately Measures: Oxygen (0 to 21% v/v)

Carbon monoxide (0 to 4000ppm) Flue and inlet temperature Differential pressure (±40mbar) Draught (±20mbar)

Calculates: Carbon dioxide (CO2) CO/CO2 ratio Efficiency Excess air

Multi-Fuel: Natural Gas, LPG, Propane, Butane, Light Oil, Heavy Oil, Kerosene, Wood Pellets

Dimensions: 201 x 83 x 44 mmWeight: approximately 700 gPower: Rechargeable battery 1500 mAh, mains unit 5V / 1A

Measuring range Accuracy ±1 digit Resolution Adjustment time t90Temperature (flue gas) 0.0 to 400.0 °C ±1 °C (0,0 to 100,0 °C) 0.1 °C < 50 sec

±1.5 % of reading ( > 100 °C)Ambient temperature -20 to +100.0 °C ± 1 °C 0.1 °C < 50 sec

± 0.03 hPa (-3.00 to +500 hPa) -Draught measurement -20.00 to +20.00 hPa ± 1.5% of m.v. (remaining range) 0.1 hPa

Pressure measurement -40,00 to +40.0 hPa ± 0.5 hPa 0.1 hPa -O2 measurement 0.0 to 21.0 vol.% ± 0.2 vol.% 0.1 vol. % 30 secCO measurement 0 to 4000 ppm ±3 ppm (0 to 30 ppm) 1 ppm 60 sec

±10 % of M.V. (31 to 200 ppm)±20 ppm (201 - 400 ppm)±5 % of M.V. (401 to 2000 ppm)±10 % of M.V. (2001 to 4000 ppm)

Ambient CO 0 to 4000 ppm ±3 ppm (0 to 30 ppm) 1 ppm 60 sec±10 % of M.V. (31 to 200 ppm)±20 ppm (201 - 400 ppm)±5 % of M.V. (401 to 2000 ppm)±10 % of M.V. (2001 to 4000 ppm)

Determination degree -of effectivity (Eta) 0 to 120 % - 0.10%

Exhaust gas loss 0 to 99.9 % - 0.10%

Part No Description05633100 TESTO 310 FLUE GAS SET

includes battery with mains charger, 180mm probe & cone, 5 particle filters, silicon hose and moulded case.

05633110 TESTO 310 FLUE GAS SET WITH PRINTERin addition to above includes IR printer (05543100) and 2 rolls of thermal paper in a moulded case.

05543100 TESTO IR PRINTERwith wireless infrared interface for use with Testo 310 onlysupplied with 1 roll of thermal paper and 4 AA batteries

05540568 6 ROLLS OF THERMAL PAPER FOR IR PRINTERpermanent ink remains legible for up to 10 years

05540040 10 SPARE PARTICLE FILTERS FOR TESTO 310


CO/CO2 Ambient Air Monitor FIRST CHOICE CATERING SPARES LTD

TESTO 315-3 CO/CO2 IN AMBIENT AIR MONITOR The Testo 315-3 provides parallel and direct CO/CO2 measurement in ambient air according to EN 50543. It isideal for measuring air quality around gas heated equipment in a commercial catering premises and ensuringsafe working conditions. Convenient and easy operation with direct display of both gases with optical/audible signalsthat let you know immediately when the adjustable limit values have been exceeded. Optional printer with infraredinterface allows you to create clear reports on site as required. Auto shut off and a Lithium polymer rechargeablebattery ensure that the instruement can be used for long periods of time between recharges.

Accurately Measures: Carbon monoxide (0 to 100 ppm) Carbon Dioxide (0 to 10,000 ppm)Humidity (+5 to +95 %RH) Temperature (-10 to +60 °C)

Operating Temperature: 0 to +40 °CDimensions: 190 x 65 x 40 mmWeight: 200 gPower: Rechargeable Lithium polymer battery pack

with approx 10h continuous use

Measuring range Accuracy ±1 digit ResolutionCO Sensor 0 to 100 ppm ±3 ppm (0 to 20 ppm) 0.5 ppm

±5 ppm (> 20 ppm)±300 ppm (0 to 4,000 ppm)

CO2 Sensor 0 to 10,000 ppm ±8% of mv (4,000 to 6,000 ppm) 10 ppm±500 ppm (6,000 to 10,000 ppm)

Temperature/Humidity Module +5 to +95 %RH ±2.5 %RH (5 to 95 %RH) 0.1 %RH-10 to +60 °C ±0.5 °C (±1 digit)

Part No Description30006323153 TESTO 315-3 AMBIENT CO/CO2 AIR MONITOR

includes battery with USB mains charger in a soft case30006323155 TESTO 315-3 AIR MONITOR WITH PRINTER

in addition to above includes IRDA printer (05540549) and 2 rolls of thermal paper for the printer in a soft case.

05540549 TESTO IRDA PRINTERwith wireless infrared interface supplied with 1 roll of thermal paper and 4 AA batteries

05540568 6 ROLLS OF THERMAL PAPER FOR IR PRINTERpermanent ink remains legible for up to 10 years

Optional IRDA Printer


FIRST CHOICE CATERING SPARES LTD Pressure/Air Flow Measurement

TESTO 410 VANE ANEMOMETER Testo 410-1 measures flow velocity and temperature. It is ideal for quick spot checks at air outlets on accountof its integrated measurement with the 40mm vane. Hold function with max/min values and timed mean calculationis possible. In addition to air speed and temperature, testo 410-2 also measures air moisture. Testo's very own,patented humidity sensor guarantees accurate readings. In this way, air conditions can be reliably checked.

Probe - NTC: Measuring Range -10 to +50 °CAccuracy ±0.5 °CResolution 0.1 °C

Probe - Vane: Measuring Range 0.4 to 20 m/sAccuracy ±(0.2 m/s + 2% of mv)Resolution 0.1 m/s

Humidity Sensor: Measuring Range 0 to 100 %RH(model 410-2 only) Accuracy ±2.5 %RH (5 to 95 %RH)

Resolution ±0.1 %RHOperating Temperature: -10 to +50 °CDimensions: 133 x 46 x 25 mmWeight: 110 gPower: 2 batteries type AAA with typical life of 100h

continuous use

Part No Description05604101 TESTO 410-1 VANE ANEMOMETER

with integrated NTC air thermometer, batteries and calibration protocol, wrist strap, belt holder, protective cap

05604102 TESTO 410-2 VANE ANEMOMETER WITH HUMIDITYwith integrated NTC air thermometer, Humidity Sensor

batteries and calibration protocol, wrist strap, belt holder, protective cap

TESTO 510 DIFFERENTIAL PRESSURE METER The differential pressure meter is ideally suitable for pressure measurements in the range 0 to 100 hPa and istemperature-compensated for accurate readings. Readings can be displayed in Pascal over the whole measurementrange. Magnets at the back of the instrument enable hands-free operation

Measuring Range: 0 to 100 mbarAccuracy: ±0.03 mbar (0 to 0.30 mbar)

±0.05 mbar (0.31 to 1.00 mbar)±(0.1 mbar + 1.5 %of mv) (1.01 to 100 mbar)

Resolution: 0.01 mbarSwitchable units: hPa, mbar, Pa mmH2O, mmHg, inH2O, inHg,

psi, m/s, fpmOperating Temperature: 0 to +50 °CDimensions: 119 x 46 x 25 mmWeight: 90 gPower: 2 batteries type AAA typical life of 50h

continuous use

Part No Description05600510 TESTO 510 DIFFERENTIAL PRESSURE METER

with protection cap, wrist strap, belt holder, batteries and calibration protocol


Gas Leak Detectors FIRST CHOICE CATERING SPARES LTD

TESTO 317-1 FLUE GAS LEAK DETECTOR The Testo 317-1 flue gas spillage detector reliably detects escaping heating gases. The practical instrument immediatelygives off a visual and audible alarm. It is therefore not necessary to actually see the detector. The bendable probe facilitates applications in confined areas.• Reliable recognition of escaping flue gases• Bendable measurement probe for points which are difficult to access• Audible and visual alarm• Uses 3 AAA micro batteries• Dimensions 128 x 46 x 18mm with 200mm long probe• Weight 300g

Part No Description06323170 TESTO 317-1 FLUE GAS LEAK DETECTOR

Supplied with flexible probe and batteries ______________________________________________________________________________________________________________________________

TESTO 317-2 NG/LPG GAS LEAK DETECTOR Highly practical gas leak detector for fast checks on gas pipe connections, with visual bar display.• Measuring range - 0 to 20,000 ppm CH4 (Methane)

0 to 10,000 ppm C3H4 (Propane)• Lower response threshold - 100 ppm CH4 / 50 ppm C3H4 • 1st alarm limit - 10,000 ppm CH4 / 5,000 ppm C3H4• Shows gas concentration in visual bar display• Sensor self-test following switch-on• Audible confirmation of readiness to operate• Increasing alarm sounds with increasing gas concentration• Continuous sound if alarm threshold is exceeded• 2 AAA batterries with battery monitoring and optical display• Self-test function

Part No Description06323172 TESTO 317-2 NG/LPG GAS LEAK DETECTOR

Supplied with case, belt clip, wrist strap and batteries______________________________________________________________________________________________________________________________

TESTO 316-3 REFRIGERANT LEAK DETECTOR Optimal sensitivity to all CFC, HCFC, and HFC refrigerants, detecting leaks as small as 4g/a, enables the service technician to quickly locate even the smallest leaks. Conforming with F-gas regulations. • Electrochemical heated diode sensor technology• High/low sensitivity adjustment• Automatic background adjustment• Progressive LEDs to indicate leak size and audible alarm• Detectable refrigerants R-22, R134a, R-404A, R410A,

R-507, R438A and all CFC's, HFC's and PFC's• Conforms: SAE J1627, EN 14624, EG 2004/108/EG• Power: 2 D batteries for 16 hours continuous use

Part No Descriptione05633163 TESTO 316-3 REFRIGERANT LEAK DETECTOR

Includes sensor tip, transport case, calibration protocol, batteries, filter and instruction manual.


FIRST CHOICE CATERING SPARES LTD Digital Refrigeration Technology

TESTO DIGITAL REFRIGERATION MANIFOLDSA range of high-performance Digital Manifolds that accurately perform temperature and pressure measurements in seconds.They can automatically calculate superheat and subcooling for a wide range of different refrigerants quickly and easily. Theycan be used to service, maintain and commission all types of air conditioning, refrigeration and heat pump systems, performtimed pressure drop tests as well as standing pressure tests required for properly commissioning AC/R systems.

Part No 05635505 05635572 05635701Integrated temperature measurement l l l

(up to 2 NTC probes) (up to 2 NTC probes) (up to 3 NTC probes)Temperature-compensated leakage test l l lHeat pump mode l l l4-way valve block X l lAutomatic absolute pressure measurement X l lInternal memory, optional Easycool software X X lRefrigerant update by customer X X lPressure measurement accuracy` 0.75%fs 0.5%fs 0.5%fsIdentical pressure measuring range HP/LP up to 50bar up to 50bar up to 50 barConnections 3x7/16"-UNF 3x7/16"-UNF plus 1x5/8"-UNF 3x7/16"-UNF plus 1x5/8"-UNFPressure Media CFC, HFC, N, H2O, CO2 CFC, HFC, N, H2O, CO2 CFC, HFC, N, H2O, CO2Dimensions 200x113x62mm 280x135x75mm 280x135x75mmWeight 1060g 1200g (without batteries) 1200g (without batteries)Probes includes 1 clamp probe 2 clamp probes 1 pliers temperature probeOptional (all models) Air Probe, Waterproof Surface Probe, Pipe Wrap Probe, Clamp ProbeOptional (570 model only) Oil Pressure Probe, Clamp Amp Probe, Printer TESTO 552 DIGITAL VACUUM GUAGE For the evacuation of refrigeration, air conditioning and heat pump systems. Utilizes a sensor that requires no cleaning and is not affected by contamination. • Built to withstand a 6 foot drop • Best-in-class accuracy • Illuminated display • 2400 hours of battery life • Measuring cycle: 0.5 seconds • Water and dust resistant (IP 42) • Vacuum measuring range: 1100-0 mbar/825080-0 micron

• Vacuum resolution: 0.01 hPa / 10 micron • Parameter: mmHg, Torr, mbar, hPa, micron, inH2O, inHg, Pa • Connections: 2x1/4"SAE - 1x MiniDin (testo 570)

Part No Description 05605520 TESTO 552 DIGITAL VACUUM GUAGE

TESTO 550-1Pressure and temperature

measurement for allservicing tasks.

TESTO 570-1For all demanding tasks such

as error analysis

TESTO 557-2With integrated vacuum

measurement and 4-way valve block for commisioning and

general service work


Temperature Measurement FIRST CHOICE CATERING SPARES LTD

TESTO MINI PENETRATION DIGITAL THERMOMETERS These compact immersion and penetration thermometers record temperature in air as well as in soft foods and liquids. • Easy to read thanks to large display• Fast and easy battery replacement• Uses button cell LR44 with life of 150h in continuous use

Part No 05601110 05601111Probe Length 133mm 213mmTemperature Range -50 to +150 °C -50 to +250 °C

±1 °C (-10 to +99.9 °C) ±1 °C (-10 to +99.9 °C) Accuracy ±2 °C (-30 to -10.1 °C) ±2% of mv (+100 to +199.9 °C)

±2%of mv (+100 to +150 °C) ±3% of mv(+200 to +250 °C)0.1 °C (-19.9 to +150 °C) 0.1 °C (-19.9 to +199.9 °C)Resolution 1 °C (remaining range) 1 °C (remaining range)

______________________________________________________________________________________________________________________________

TESTO 103 FOLDING DIGITAL THERMOMETER Handy, hygienic, digital thermometer suitable for measuring food temperatures during production, storage and processing.It begins measurement from a fold-out angle of 30°. After measurement, the probe can be simply folded away. The Testo 103 is compliant with HACCP and EN 13485.• Measures temperature range of -30 to +220 °C• Accuracy.±0.5°C (-30 to +99.9°C) ±1 % of mv >100°C• Narrow probe tip is ideal for spot check measurements.• Easy-to-clean white ABS housing with a robust probe.• Meets protection class IP55.• Uses 2 lithium batteries (CR2032) with a life of 300h• Dimensions 189 x 35 x 19 mm (folds to 110mm long)• Weight 49g

Part No Description05600103 TESTO 103 FOLDING DIGITAL THERMOMETER______________________________________________________________________________________________________________________________

TESTO 104 WATERPROOF FOLDING DIGITAL THERMOMETER Folding thermometer that meets protection class IP65 which allows cleaning under running water and use under all conditions.It is ideally suited to core temperature measurements of foods thanks to a robust metal folding joint and a long, stable measurement probe. Model 104IRalso features infrared for non-contact temperature measurement. Compliant with HACCP and EN 13485.• Probe measures temperature range of -50 to +250 °C• Probe accuracy.±0.5°C (-30 to +99.9°C), ±1°C (-50 to -30°C), ±1% of mv (>100°C)• IR temperature range of -30 to +250 °C• IR accuracy.±2.5°C (-30.0 to -20.1°C ), ±2°C (-20.0 to -0.1 °C )

±1°C or ±1.5 % of mv remainder of the range• Resolution 0.1 °C • ABS/TPE/Metal housing.• Protection class IP65.• Uses 2 batteries type AAA • Dimensions 104 - 265x48x19mm, 104IR - 281x48x21mm• Weight 104 - 165g, 104IR - 197g

Part No Description05630104 TESTO 104 WATERPROOF FOLDING THERMOMETER

with folding penetration probe only05601040 TESTO 104-IR WATERPROOF INFRARED THERMOMETER

combines a folding penetration probe with an infrared sensor for non-contact temperature measurement

Model 104

Model 104IR


Temperature Measurement

TESTO 810 TWO CHANNEL INFRARED THERMOMETER Designed for the measurement of air temperature and simultaneous non-contact surface temperature measurement in one instrument with laser spot marking and integrated NTC air thermometer. • Infrared measurement with 1-point laser spot marking and 6:1 optics.• Display of differential temperature, e.g. between food and air. • Hold function and min./max. values.• Emissivity adjustable.• Display illumination.• Infrared measurement in temperature range of -30 to +300 °C• Infrared measurement accuracy.±2.0 °C (-30 to +100 °C) ±2% of mv (remaining range) • NTC measurement in temperature range of -10 to +50 °C• NTC measurement accuracy.±0.5 °C• Resolution 0.1°C • Uses 2 type AAA batteries with a life of 50h • Dimensions 119 x 46 x 25 mm• Weight 90g

Part No Description 05600810 TESTO 810 TWO CHANNEL INFRARED THERMOMETER

includes protective cap, batteries, pouch and calibration protocol______________________________________________________________________________________________________________________________

TESTO 108 WATERPROOF DIGITAL THERMOMETER Designed to spot-check the precise temperature of foodstuffs to monitor and guarantee the quality of food products whether in the transportation and storage of foodstuffs, in restaurants, in large kitchens or in chain restaurants. The testo 108-2 allows temperature measurement to be integrated into daily work routines with no added complications, helping the user comply with HACCP requirements and certified according to EN 13485. Two self-explanatory buttons for easy application even by frequently changing staff. • Easy readout of measurement value with large display. • Instrument and probe waterproof to IP67. • Conforms to HACCP and EN13485. • Measurement rate of 2 temperature readings per second.• 108-1 supplied with type T probe (Cu-CuNi)with the ability to connect optional type K probes (NiCr-Ni).• 108-2 supplied with a screw-in and lockable type T probe for secure attachment. • Measures temperature range of -50 to +300 °C• Accuracy of Instrument .±0.5 °C (-30 to +70 °C) ±0.5 °C ±0.5 % of m.v. (remaining range)• Accuracy of Probe .±0.5 °C (-40 to -20 °C) ±0.2 °C (-20 to +70 °C) ±0.5 °C (+70 to +125 °C) ±0.4 % of m.v. (+125 to +300 °C)• Resolution 0.1°C • Uses 3 type AAA batteries with a life of 2500 h (typical, at 23 °C) • Dimensions 140 x 60 x 24.5 mm • Weight 150g

Part No Description 05631080 TESTO 108-1 THERMOMETER WITH PROBE

supplied with standard temperature probe Type T and soft case05631082 TESTO 108-2 THERMOMETER WITH LOCKABLE PROBE

supplied with lockable temperature probe Type T and soft case

Testo 108-2 with screw-in and lockable type T probe with auto-hold,

hold and min/max functions.

Testo 108-1 with standard probe connection

FIRST CHOICE CATERING SPARES LTD


Temperature Measurement FIRST CHOICE CATERING SPARES LTD

TESTO 925 SINGLE CHANNEL THERMOMETER One channel temperature measuring instrument for connection to fast-action thermocouple probes. Audible alarm sounds if limit values are exceeded. Current measurement data as well as max/min data can be printed to optional printer. • Wide range of optional probes including a radio probe. • K probe measures temperature range of -50 to +1000 °C• K probe accuracy.±(0.5 °C +0.3% of mv) (-40 to +900 °C) remaining range ±(0.7 °C +0.5% of mv) • Resolution 0.1°C (-50 to +199.9 °C) 1°C >200°C.• Continuous display of max/min values• Hold button to freeze reading.• Audible alarm sounds when limit values are exceeded• Uses 9V block battery 6F22 with a life of 200h (connected probe/backlight off)• Dimensions 182x64x40mm• Weight 171g

Part No Description 05609250 TESTO 925 SINGLE CHANNEL THERMOMETER ______________________________________________________________________________________________________________________________

TESTO 922 TWO CHANNEL DIFFERENTIAL THERMOMETER Two channel temperature measuring instrument for connection to fast-action thermocouple probes. Audible alarm sounds if limit values are exceeded. Current measurement data as well as max/min data can be printed to optional printer. • Wide range of optional probes including a radio probe. • K probe measures temperature range of -50 to +1000 °C• K probe accuracy.±(0.5 °C +0.3% of mv) (-40 to +900 °C) remaining range ±(0.7 °C +0.5% of mv) • Resolution 0.1°C (-50 to +199.9 °C) 1°C >200°C.• Continuous display of max/min values• Hold button to freeze reading.• Audible alarm sounds when limit values are exceeded• Uses 9V block battery 6F22 with a life of 200h (connected probe/backlight off)• Dimensions 182x64x40mm• Weight 171g

Part No Description 05609221 TESTO 922 TWO CHANNEL DIFFERENTIAL THERMOMETER

______________________________________________________________________________________________________________________________

TESTO PROBES FOR TEMPERATURE MEASUREMENT

Part No Description Probe Dims Cable Temperature Accuracy t99 dia x length length Range °C 06021793 T/C TYPE K AIR PROBE 4mm x 115mm fixed 1.2m -60 to +400°C Class 2 25s 06020593 T/C TYPE K IMMERSION PROBE 1.5mm x 300mm fixed 1.2m -60 to +1000°C Class 1 2s 06021293 T/C TYPE K IMMERSION TIP PROBE 5mm x 114mm fixed 1.2m -60 to +400°C Class 2 7s 06020193 T/C TYPE K PADDLE SURFACE PROBE 8mm x 145mm fixed 1.2m 0 to +300°C Class 2 5s 06020393 T/C TYPE K SPRUNG STRIP SURFACE PROBE 5mm x 115mm fixed 1.2m -60 to +300°C Class 2 3s short term to +500°C06021993 T/C TYPE K WIDE TIP SURFACE PROBE 5mm x 115mm fixed 1.2m -60 to +400°C Class 2 30s 06022292 T/C TYPE K ST ST FOOD PROBE 4mm x 125mm fixed 1.2m -60 to +400°C Class 2 7s 06022492 T/C TYPE K ST ST FOOD PROBE WITH HANDLE 5mm x 115mm fixed 1.2m -60 to +400°C Class 1 15s 06281292 T/C TYPE K COOKING OIL IMMERSION PROBE 4mm x 240mm fixed 1.2m -50 to +230°C Class 1 15s 06020644 THERMOCOUPLE WITH TC ADAPTER TYPE K 1.5mm x 800mm -50 to +400°C Class 2 5s 06020645 THERMOCOUPLE WITH TC ADAPTER TYPE K 1.5mm x 1500mm -50 to +400°C Class 2 5s


FIRST CHOICE CATERING SPARES LTD Digital Refrigeration Technology

TESTO 830-T1 INFRARED TEMPERATURE MEASUREMENT For non-contact measurement of surface temperatures with 1 point laser sighting, adjustable limit values and alarm function. • 1-point laser marking, 10:1 optics• Laser measurement point marker and large optics for exact measurement even at greater distances• Fast recording of measurement values at two measurements per second • Adjustable emissivity• Two adjustable alarm limit values• Hold function and display of min/max values• Infrared temperature range -30 to +400 °C• Infrared accuracy ±1.5 °C or 1.5 % of mv (+0.1 to +400 °C) ±2 °C or ±2 % of mv (-30 to 0 °C)• Resolution 0.1°C• 9V block battery with typical life of 15h • Dimensions 190 x 75 x 38 mm• Weight 200g

Part No Description 05608311 TESTO 830-T1 INFRARED TEMPERATURE MEASUREMENT

includes batteries and calibration certificate

TESTO 830-T2 INFRARED TEMPERATURE MEASUREMENTFor non-contact temperature measurement with 2 point laser sighting and ability to connected to optional type K probes. Features as 830-T1 plus:• 2-point laser marking, 12:1 optics• Infrared temperature range/resolution as 830-T1• Type K probe temperature range --50 to +500 °C• Type K probe accuracy ±0.5 °C +0.5% of mv• Resolution 0.1°C


includes batteries and calibration certificate______________________________________________________________________________________________________________________________

TESTO 835-T1 INFRARED TEMPERATURE MEASUREMENT For 4 point laser sighting infra red non-contact temperature measurement of smaller objects from a medium distance or from optional type K probes• 4-point laser marking, 50:1 focused optics (5m distance = 10cm measurement spot)• Permanent sensor check for fast and safe work • Convenient menu guidance with icons and joystick• Save measurement data on-site and subsequently analyse it via PC• Infrared probe temperature range -30 to +600°C• Infrared accuracy ±2.5°C (-30.0 to -20.1°C ) / ±1.5°C (-20.0 to -0.1°C ) ±1.0°C (+0.0 to +99.9°C ) / ±1% of mv (remaining range)• Type K probe temperature range -50 to +600°C• Type K probe accuracy ±(-0.5°C +0.5% of mv)• Resolution 0.1°C• 3 batteries type AA with life of 10h (typical 25°C without backlight)• Dimensions 193 x 166 x 63mm• Weight 514g


includes batteries and calibration protocol

FIRST CHOICE CATERING SPARES LTDUnit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU

tel: 01543 577778 fax: 01543 504141 email: [email protected] web: www.firstchoice-cs.co.uk

Thermal Imaging FIRST CHOICE CATERING SPARES LTD

TESTO 870 THERMAL IMAGER Carry out damage-free tests on equipment to visualize hot spots detectleakages, localizing cold bridges or visualizing overheated connections and reduce energy loss. The Testo 870 features a large display, high-qualitydetector, wide field of view and uncomplicated operation. Infrared Image Output• Infrared resolution 160 x 120 (19200) pixels• Geometric resolution (IFOV) 3.68 mrad• Optional SuperResolution technology to 320 x 240 pixel/2.3 mrad (IFOV) • Output image size 3.1 MP• Thermal sensitivity <100 mK at +30 °C• 34° x 26° field of view with <0.5 m minimum focus distance (fixed focus)• Image refresh rate of 9 Hz• Spectral range 7.5 to 14 μm Image Presentation• Image display 3.5" LCD with 320 x 240 pixels• Display options IR image only with 870-1, IR image/real image 870-2• Colour palettes 4 (iron, rainbow, cold-hot, grey)• Measuring range -20 to +280 °C• Accuracy ±2 °C, ±2 % of m.v.• Emissivity 0.01 to 1 Analysis Function• Centre point measurement, hot/cold spot measurement Imager Equipment• Integral digital camera with model 870-2 Image Storage• File formats .bmt and .jpg; export options in .bmp, .jpg, .png, .csv, .xls• Memory 1.6 GB / >2000 images internal storage Power Supply• Li-ion rechargeable battery with 4 hour run time & mains operation Ambient Conditions• Operating temperature range -15 to +50 °C• Storage temperature range -30 to +60 °C• Housing protection class (IEC 60529) IP54• Vibration (IEC 60068-2-6) 2G• Air humidity 20 to 80 %RH non-condensing PC Software• Windows XP (Service Pack 3), Windows Vista, Windows 7. Windows 8• Interface USB 2.0 Physical specifications• Dimensions 219 x 96 x 95 mm• Weight 550g approx

Part No Description 3005608701 TESTO 870-1 THERMAL IMAGER

supplied in padded soft case including pro software, USB cable, mains unit, and Li ion rechargeable battery

05608702 TESTO 870-2 THERMAL IMAGING CAMERA supplied in moulded hard case including pro software, USB cable, mains unit, and Li ion rechargeable battery Optional Extra

05547806 SUPER RESOLUTION (Four times more measurement values)

Testo 870-1 is supplied in ahigh quality, padded travel bag

Testo 870-2 is supplied in a moulded case

Date post:	05-Jun-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Testo Leaflet 2015 Layout 1 - First Choice Group · Tel: 01543 577778 Fax: 01543 504141 Email:...

Documents