28
The ARBURG magazine Issue 58 2015
The ARBURG magazine Issue 58 2015
today 58/20152
CONTENTS
241916
1284
Tempco: Cost-effective production thanks to BMC injection moulding and Singapore office
Machine manufacturing exper-tise: High level of vertical integration for freeformer
Silcotech: One stop shop for com-plex silicone parts
Eugen Hehl: A life’s work – two awards in 2015
Individualised rocker-type light switches: At the Hannover Messe 2015, ARBURG presented a fully networked process chain including Industry 4.0. High-volume products were turned into one-off items through the combination of injection moulding and additive manufacturing.
today, the ARBURG magazine, issue 58/2015Reprints, including excerpts, only with express permission.Responsible: Dr. Christoph SchumacherEditorial advisory board: Heinz Gaub, Oliver Giesen, Juliane Hehl, Martin Hoyer, Jürgen Peters, Bernd Schmid, Jürgen Schray, Wolfgang Umbrecht, Dr. Thomas Walther, Renate WürthEditorial team: Uwe Becker (text), Andreas Bieber (photos), Dr. Bettina Keck (text), Markus Mertmann (photos), Susanne Palm (text), Oliver Schäfer (text), Peter Zipfel (layout) Editorial address: ARBURG GmbH + Co KG, PO box 1109, 72286 LossburgTel.: +49 (0) 7446 33-3149, Fax: +49 (0) 7446 33-3413E-mail: [email protected], www.arburg.com
IMPRESSUM
Hannover Messe 2015: ARBURG impresses with fully networked process chain
USA and Czech Republic: Managing Partners officially inaugurate new ARBURG buildings
ERCO: Efficient production of high-quality LED technology has promis-ing future
Heinz Gaub: Strategic approach to new technologies
freeformer: Global market introduc-tion complete
Tech Talk: Production efficiency reduces unit costs – cube-mould case study
Cube mould technology: ARBURG supplies complete production systems
Çığır Kimya: Advances thanks to all-round efficiency in the production of shoe care products
6 10 14
18 20 26
Daniele Triva: Pioneer in pre- diagnostics and analytics
22
today 58/2015 3
EDITORIAL
Dear Readers,
Our global ARBURG network
has been growing continu-
ously since the establishment
of our first foreign subsidiary
in France in 1985. Our US
subsidiary is now already the third to celebrate its
25-year anniversary. The fact that growth is also reflect-
ed in the expansion of the individual locations is
evidenced in the Czech Republic and the US, where
new premises have been inaugurated in recent months.
My father, Eugen Hehl, who set off on the road to
successful internationalisation, has impressively received
two awards for his life’s work this year. His induction in
the SPI “Plastics Hall of Fame” was a very special honour
for him and for our entire company. It confirmed our
innovative strength and vision.
Our Managing Director Technology & Engineering,
Heinz Gaub, reports on how we are preparing for the
future in this regard.
A decisive success factor for ARBURG is its high level
of vertical integration. This of course also applies to
the freeformer, which is now available worldwide,
and the serial production which we are reporting on
in this issue.
Furthermore, our articles feature such topics as how
unusual ideas can be implemented cost-effectively in
practice using ARBURG technology, whether they
involve liquid silicone (LSR) or thermosets and whether
they relate to the optical, packaging or medical
technology sectors. You will doubtless find some inspi-
ration for your own efficient production in the current
issue of our magazine. We would be delighted to
receive your feedback.
I hope you enjoy reading the new issue.
Michael HehlManaging Partner
Congratulations!Eugen Hehl: A lif e’s work – two awards in 2015
today 58/2015 5
OUR COMPANY
Over the decades, Eugen Hehl has been bestowed numer-ous awards for his life’s
work, his innovative capacity and his entrepreneurial vision. This year alone, he has received two: In March 2015, ARBURG’s Senior Partner was inducted into the SPI “Plastics Hall of Fame” in the US. Two months later, he also accepted the German Baden-Württemberg Competence Prize for Innovation and Quality.
Previous “Plastics Hall of Fame” inductees include such illustrious figures as Leo Baekeland, the inventor of Bakelite, George Eastman, the founder of Eastman Kodak, and Earl S. Tupper, the founder of the Tupperware Group. “I feel extremely honoured at my inclusion and would like to express my deepest gratitude,” said Eugen Hehl, sending his greetings remotely on the eve of the NPE 2015. As he was unable to personally make the trip to Florida, he had prepared a special video message which was played back live dur-ing the evening celebrations.
Pioneering achievements
In his address, the ARBURG Senior Partner explained that his recipe for success was hard work, deep commit-ment, technical sophistication coupled with clever and sometimes astonishing-ly simple solutions, as well as two open ears for his customers’ requirements. “With the invention of the ALLROUNDER and of the freeformer, we have made techno logical history – a history that we
would like to build upon significantly in the future.”
In May 2015, Eugen Hehl also accepted a further award for outstanding innova-tion, entrepreneurial vision, social com-mitment and sustainability, the individual Baden-Württemberg Competence Prize for Innovation and Quality.
Exemplary entrepreneurship
Together with his brother Karl Hehl, who passed away in 2010, Eugen Hehl turned the family-run company, which is now in its third generation, into a leading global machine manufacturer for which he was the driving force in sales and internationalisation for over six decades. To this day, the 86 year-old Consulting Partner is actively involved in continuing the ARBURG success story in an advisory capacity.
Outstanding inventions include, for ex-ample, the ALLROUNDER principle (1961) and the first machine worldwide to feature microprocessor control (1975). Pioneering process engineering achievements made by ARBURG include multi-component injection moulding, powder injection moulding and the processing of liquid silicone (LSR). In 2013, the freeformer for industrial additive manufacturing cele-brated its world première.
Congratulations!Eugen Hehl: A lif e’s work – two awards in 2015
Award-winning entrepreneurship: In the spring
of 2015, ARBURG Senior Partner Eugen Hehl
was inducted into the “Plastics Hall of Fame”
(photo on left) and was awarded the Baden-
Württemberg Competence Prize (photo above).
Greetingsfilm
today 58/20156
company, ARBURG has invested in its international sales and service network on an ongoing basis.an ongoing basis.
Successful in the US for 25 years
Founded in 1990, ARBURG Inc. was one of the first subsidiaries and the US is ARBURG’s largest foreign market. Accordingly, the inauguration of the new headquarters and the 25-year an-niversary were celebrated in style. On this occasion, the ARBURG Inc. custom-ers also enjoyed a special anniversary event. With Michael Hehl, Spokesperson for the Management Team, Managing Directors Heinz Gaub (Technology & Engineering) and Helmut Heinson (Sales), a high-ranking delegation from
Ongoing expansionOngoing expansionOngoing expansionUSA and Czech Republic: Managing Partners officially inaugurate new ARBURG buildings
ARBURG Managing Partner Michael Hehl
(centre) opens the new building in Rocky Hill
with Managing Director Helmut Heinson,
subsidiary manager Friedrich Kanz, SPI
President and CEO William R. Carteaux and
Managing Director Heinz Gaub (from left to
right). On this occasion he presents a
commemorative sculpture to Friedrich Kanz
(photo below).
Photos: Jeff Yardis
Mission accomplished: the two latest ARBURG build-ings have been complet-
ed and officially inaugurated by the Managing Partners and Managing Directors. The extension in the Czech Republic was followed by the building for the relocated ARBURG US head-quarters in Rocky Hill, Connecticut. Here, there were two reasons to celebrate: the inauguration and the 25-year anniversary of ARBURG Inc.
In order to provide international cus-tomers with the same first-class support that is on offer at the German parent
today 58/2015 7
OUR COMPANY
Ongoing expansionOngoing expansionOngoing expansionOngoing expansionUSA and Czech Republic: Managing Partners officially inaugurate new ARBURG buildingsUSA and Czech Republic: Managing Partners officially inaugurate new ARBURG buildings
the parent company was in attendance. During the Open House held the follow-ing day, 245 guests were able to learn about current topics such as industrial ad-ditive manufacturing with the freeform-er and lightweight construction through presentations and exhibits, as well as view the extensive facilities available to them at the new premises in Rocky Hill.
2,500 square metres for US headquarters
The new ARBURG building covers a to-tal floorspace of 2,500 square metres and tal floorspace of 2,500 square metres and boasts state-of-the-art infrastructure. At its heart is the showroom, which provides space for seven ALLROUNDER injection moulding machines intended for testing and training activities. The building also features a comprehensive spare parts store, a machine store, as well as areas for turnkey systems and the freeformer.
Brno ATC extended to over 1,660 square metres
The extended premises at the Brno ATC were officially inaugurated on 21 April 2015 in the company of Managing Partners Eugen, Juliane and Michael Hehl,
as well as Managing Director Sales, Helmut Heinson. By expanding the usa-ble floorspace by 615 to more than 1,660 square metres, sufficient space is now also available for automation solutions and turnkey systems. Moreover, there is a dedicated area for the freeformer and additive manufacturing.
Official inauguration of the new premises
in Brno (right to left): Subsidiary manager
Dr. Daniel Orel, ARBURG Managing Partners
Michael, Juliane and Eugen Hehl, as well as
Managing Director Sales Helmut Heinson.
Photo: Jan Kolar
The future begins now!Hannover Messe 2015: ARBURG impresses with fully networked process chain
1 2
43
5 6
today 58/2015 9
injection moulding, industrial additive manufacturing, au-tomated packaging of the individualised product and display of the process param-eters on a part-spe-cific web page.
Project partners included Gira (product and mould con-struction), Trumpf (laser labelling), Fuchs Engineering (quality inspection) and FPT Robotik (automation).
Systems for networked production
“We have been working on the topic of Industry 4.0 for a considerable time now and, with our fully automated ALLROUNDERs, the freeformer and IT solu-tions, are increasingly developing into a pro-duction system provider for networked pro-duction in the digital factory of tomorrow,” explained ARBURG Manager Technology & Engineering, Heinz Gaub. He went on to ex-plain that ARBURG had demostrated at the Hannover Messe how the freeformer could be seamlessly integrated into an automated production cell. Furthermore, he added that ARBURG had made it clearly evident that the system for industrial additive manufac-the system for industrial additive manufac-the system for industrial additive manufacturing is also ideal for the enhancement of high-volume parts.
OUR COMPANY
As an exclusive partner of the Additive Manufacturing Plaza, ARBURG made a lasting impres-
sion at the Hannover Messe 2015. The trade visitors were amazed at the fully networked process chain along which they were able to individualise “rock-they were able to individualise “rock-they were able to individualise “rocker-type light switches”, turning them into one-off items. Renowned experts expressed their delight and praised the impetus that ARBURG has provided for the entire industry with its practical implementation of Industry 4.0.
“We have shown the technology of the future at the world’s largest indus-trial trade fair and have evidently tapped the spirit of the times. By combining the Industry 4.0 process chain and the indivi-dualisation of high-volume parts using ad-ditive manufacturing, we have presented ourselves convincingly and generated a great deal of interest. This is what we had hoped for in the run-up, but not to that extent,” said Managing Partner Juliane Hehl, add-ing, “We have bundled all of our in-house expertise and have demonstrated what
we are able to achieve jointly with excel-lent partners.”
In the plastics world, ARBURG has been known for decades as a trendsetter that develops innovative machines and the cor-responding control system in-house.
ALS – the key to Industry 4.0
Back in 1986, ARBURG presented the first fully-automated injection moulding system worldwide, which was controlled via the ARBURG host computer system (ALS) and was therefore far ahead of its times. Today, ALS plays a central role in the topic of Industry 4.0 and the trace-ability of individual parts. With ALS, ma-chine and production data, for example,
can be networked and process para-meters uniquely as-signed.
As an exclusive partner of the special “Additive Manufa-cturing Plaza” exhibi-tion at the Hannover Messe 2015, ARBURG presented a fully net-worked process
chain, based on the example of a rock-er-type light switch, which extended from product design and order entry through
The future begins now!The future begins now!Hannover Messe 2015: ARBURG impresses with fully networked process chainHannover Messe 2015: ARBURG impresses with fully networked process chain
Product design: Rapid production of prototypes
with 3D CAD data and the freeformer.
Order entry: Visitors select individual symbols
and names for the light switches.
High-volume production: ALLROUNDER produces
rocker-type light switch, DM code is applied by laser.
Individualisation: freeformer additively
enhances part with symbol/name combination.
Packaging: Box is individually printed in
accordance with the relevant light switch.
Data retrieval: Part-specific web page can
be called up via code using mobile device.
1
2
3
4
5
6
Process chain
today 58/201510
ERCO: Efficient production of high-quality LED technology has promising future
Shining exampleShining example
ERCO Lichtfabrik, which is based in Lüdenscheid, Germany, is a lead-ing specialist for architectural
lighting using LED technology. Since the autumn of 2014, the company has been using an ARBURG production cell for the fully-automated manufacture of large-surface, thick-walled high-tech lenses. The special feature here is that the six-axis robotic system not only performs moulded-part handling, but also carries out other tasks during the residual cooling phase.
“By investing in fully automated pro-duction and by linking several process steps, we have succeeded in further op-timising both the quality and the price/performance ratio of our lights,” explains Holger Thomas, Department Manager Production and Mouldmaking at ERCO. The company has specialised in digital architectural lighting, a sector in which it sees a sustainable future for itself. The production cell built around a hydraulic ALLROUNDER 720 S with a clamping force of 3,200 kN is in continuous operation at
ERCO. Currently, it is mainly being used for the production of a compact LED lens system made from PMMA for use in ceiling-recessed luminaires for offices and shops.
One system – multiple product variants
On this system, ERCO produces a number of lens variants and so-called collimators which bundle the light rays. Depending on the product, the cycle times vary between around 1 and 18 minutes.
Part handling is performed using a six-axis robotic system featuring the SELOGICA user interface, which can be programmed in a relatively straightfor-ward manner using the familiar control philosophy from injection moulding machines. The gripper can be easily and quickly adapted to the relevant product variant by means of interchangeable plates with product-specific fixtures.
“The system’s benefits are clearly to be found in the precision with which we can now produce our optical elements,”
says Holger Thomas. The complete pro-duction cell is controlled centrally via the SELOGICA control system. Reject parts, the costs for transport and storage, and consequently the overall production costs, have been significantly reduced.
A majority of the lenses produced have a thickness of 30 millimetres and a diameter of around 80 millimetres. Following injection moulding, the six-axis robotic system removes them from the 2-cavity mould and first sets them down in a turning station with the sprue facing upwards. It then picks up the moulded part by the underside with its vacuum suction pads and positions it into the laser-station device with the sprue fac-laser-station device with the sprue fac-laser-station device with the sprue facing downwards. Using a freely program-mable laser beam, each lens is freed from its sprue and a demoulding aid. The latter are collected in a container in the laser station.
Finally, the robot removes both lenses and the sprue before setting them down on a conveyor belt, which removes the parts from the production cell. The sys-tem is equipped with a second conveyor
today 58/2015 11
INFOBOXINFOBOX
ERCO: Efficient production of high-quality LED technology has promising future
PROJECT
Name: ERCO GmbHFounded: 1934 as a family-owned company by Arnold ReininghausCore competencies: Leading specialist for architectural lighting using LED technologyEmployees: 880 worldwide, of which 540 in Lüdenscheid, GermanyMachine fleet: 15 injection moulding machines, of which seven ALLROUNDERsContact: www.erco.com
The cycle time for lenses with a thickness of
30 millimetres (large photo) is up to 18 minutes.
During this time, the six-axis robot continues to
feed products for laser cutting (photos at top
right and centre). The robot can be conveniently
programmed and converted for other product
variants (photo below right).
belt for the purpose of random quality-assurance sampling.
Cooling phase efficiently utilised
Particularly ingenious is the solution of utilising the residual cooling time in the injection moulding process for fur-ther tasks. Here, a drawer system is first manually loaded with so-called micro-prism lenses. Once the thick-walled lens-es have been separated from the sprues, the robot sets down each of these disc-shaped LED lenses into the laser station, where various geometries are cut out as required to create up to three circu-
lar and four square parts. The lenses are then set down on the conveyor belt and the off-cuts disposed of via a chute. This additional task can be repeated several times, depending on the cycle time. This ensures that the robotic system and laser station are optimally utilized despite the long cycle times for the main product.
Photos: ERCO
today 58/201512
INTERVIEW
Jointly with universities, research institutes and partners, ARBURG engages actively in research and
development projects on an ongoing basis today in order to advance the technologies of tomorrow. The “today” editorial team spoke with Managing Director Technology & Engineering Heinz Gaub on the major current topics and on ARBURG’s strategy.
today: One significant industry trend is lightweight construction. What is ARBURG’s involvement here?
Gaub: We are currently involved in a number of projects. The aim is, for exam-ple, to produce complex yet lightweight structural components. Lightweight con-struction processes, the development of which we have already completed joint-ly with partners, include Particle-foam Composite Injection Moulding (PCIM) as well as the fibre direct compounding and ProFoam processes.
today: In which other fields is ARBURG invol ved in research and development activities?
Gaub: In addition to the previously mentioned lightweight construction pro-cesses, the main emphasis of our current research projects lies in energy efficiency, Industry 4.0 and additive manufacturing. Together with lightweight construction, these were incidentally, four of the five key topics at this year’s Hannover Messe, which, as the leading global industrial trade fair, showcased how the produc-tion technology of the future will look. We’re therefore spot-on with our develop-ment priorities and our timing is perfect. Moreover, they complement one another to form an integrated technological and strategic concept.
today: ARBURG was prominently rep-resented with Industry 4.0 and additive manufacturing in Hanover. How was the response?
Gaub: With our fully networked pro-duction chain (see page 8), we presented the potential of our freeformer in the in-dividualisation of large-volume parts and above all also succeeded in turning the ab-stract topic of Industry 4.0 into a tangible experience based on this striking practical example, which unanimously garnered us a great deal of praise.
today: This emphasises the fact that IT unrelentingly continues to gain in importance for production. What does that mean for ARBURG as a machine manufacturer?
Gaub: That much more is needed than to simply deliver machines. Today, pro-duction technology is already inextrica-bly linked to IT and the two must mesh. With our machines, automation modules and the ARBURG host computer system (ALS), we offer sophisticated and modu-lar solutions from a single source. We are thus developing into a production system supplier for networked production in the digital factory of tomorrow.
today: When did you embark on this journey?
Gaub: Back in 1986, ARBURG already presented a fully-automated injection moulding production cell that was con-trolled via ALS. This remained a pilot sys-tem as we were simply ahead of the times with that development. At the time, the market wasn’t ready for a fully automated and networked production line because no standardised interfaces or sufficient processing power were available – and
A finger on the pul se of the timesHeinz Gaub: Strategically advancing tomorrow’s technologies today
today 58/2015 13
INTERVIEW
A finger on the pul se of the timesHeinz Gaub: Strategically advancing tomorrow’s technologies today
there was no Internet. But the work was nevertheless worthwhile. Since then, ALS has been progressively developed further and sold many hundreds of times. Today, it forms the basis for Industry 4.0 in our range of offerings.
today: With Industry 4.0, the empha-sis is also on the individual production of personalised products as one-off parts or in small unit batches. This is where addi-tive manufacturing comes into play, with which ARBURG really hit the mark.
Gaub: You can say that again. The machine, technology and timing sim-ply couldn’t have been better. For the de-velopment of the freeformer and ARBURG Plastic Freeforming, however, a great deal of fundamental research was required. It consequently took around ten years from the very first idea to full produc-tion-readiness. In between times, there were also some development freezes due to the financial crisis for a few years.
today: Is the development of the freeformer now complete?
Gaub: Absolutely not. This innovative technology still has a great deal of po-tential. In order to fully exploit this and to further develop the process in the context of promotional work, we are cooperating with universities and research institutes, for example, some of which have pur-chased their own freeformers. The focus of the development activities is on con-struction speed, special materials, control technology and the man-machine inter-face (MMI).
Cube mould technology enables high-quality injection mould-ing in large unit volumes.
Output, for example, can be more than doubled. This applies above all to two-component items. In close cooperation with Foboha, ARBURG has implemented a variety of applica-tions that demonstrate the potential of this innovative mould technology.
Around 80 percent of ALLROUNDERs with cube moulds are two-compo-nent machines. The large injection unit operates horizontally, while the small one is in a horizontal arrangement and is mounted on the moving mould mount-ing platen.
Just what cube mould technolo-gy is able to achieve is demonstrat-ed by the example of two-compo-nent juice bottle closures made from PP and HDPE. These are produced as fully functional parts on an electric ALLROUNDER 720 A with a clamping force of 3,200 kN and two, size 800 and 400, injection units. A 12+12-cavity cube mould featuring hot runners on the nozzle and ejector side is used. The process and rotation of the centre block through 90 degrees in each instance, are also driven electrically in this case. With the comprehensive use of servo-electric axes, even greater dynamics, precision and speed are achieved during the injec-tion moulding process with cube moulds.
Efficient high -volume productionCube mould technology: ARBURG supplies complete production systems
PRODUCT
All four production steps run simulta-neously in a cycle time of 5.4 seconds: the pre-moulded parts are produced in the first station and cooled in the second one. The second component is injected at the third station. This is followed by a further rotation to eject the finished parts, weighing 1.8 grams, while the mould is closed for the next injection operation.
Large closures for five-gallon wa-ter bottles are produced by a hydraulic two-component ALLROUNDER 920 S with a clamping force of 5,000 kN and two, size 3200 and 1300 injection units. For these plastic parts made from HDPE and LDPE, weighing 10.7 grams, a 32+32 cavity cube mould from Foboha is used.
The cycle time is around ten seconds, the material throughput is 120 kilogrammes per hour.
Cube mould system centrally controlled
The mould functions and the rotary system from Foboha are integrated in the SELOGICA control system. Additional time can be saved through central control of the closing, opening, rotating, locking and ejection movement sequences.
“Owing to the unit volumes alone, cube mould technology is predes-tined for packaging and personal care items,” says Andreas Reich, Senior Sales Manager Packaging at ARBURG.
“Depending on the conditions, this in-novative concept is however also high-ly interesting for medical-technology or automotive-industry applications. For efficient high-volume production, I rec-ommend remaining open to alternatives and to bear cube mould technology in mind.” ARBURG individually compares a variety of concepts and then offers the customer the most efficient production system for his application (see page 26).
Efficient high -volume productionCube mould technology: ARBURG supplies complete production systems
At the Technology Days 2015,
ARBURG presented the
production of closure caps
using a two-component
ALLROUNDER 920 S with a
32-cavity cube mould.
The cycle time was only
around ten seconds and the
material throughput was
120 kilogrammes per hour.
Silcotech from Bolton, Ontario, Canada, implements integrated engineering solutions jointly
with its customers. Innovation at the NPE 2015: eight silicones with dif-ferent Shore hardnesses and colour pigments overmoulded with a ninth silicone in a two-station rotary mould for production of a smartphone bumper case. Exclusive Silcotech machine partner since 1998: ARBURG.
The implementation of the smart-phone bumper case is illustrative of many other conceivable applications, for example in the field of medical analysis. Applications with silicones containing a variety of chemicals or hormones are conceivable here.
Since the year of the company’s foun-dation, Silcotech has been working exclu-sively with ARBURG. This has good rea-sons, which the company’s President and co-founder Michael Maloney is happy to list: “ARBURG is a reliable partner with the right amount of expertise that we require on their side. This made the de-cision to purchase the 50 ALLROUNDERs that we now own easier.” The mechan-ical structure of the ALLROUNDERs is a further point in favour of ARBURG according to Maloney, who goes on to explain that the Silcotech moulds are adapted for operation on four tie-bar machines, which makes their use and production easier.
Examples of great innovative strength
Two further customer examples vivid-ly demonstrate the innovative strength of Silcotech. These are LSR diaphragm rings, which are used in pairs for an LED lumi-naire. As soon as the light is switched on,
Impres sive solutionsSilcotech: One stop sh op for complex silicone parts
today 58/2015 17
Name: Silcotech North America Inc. Founded: 1998 by Michael Maloney and Isolde Boettger Plants: Canada, USA and India Employees: Around 130 worldwideProducts: Proprietary and customer- driven engineering solutions for mass-produced items made from siliconeIndustries: Medical technology, healthcare, automotive, packaging, electronics and consumer goodsMachine fleet: More than 50 hydraulic and electric ALLROUNDERs worldwideContact: www.silcotech.com
the two rings begin to vibrate and the diaphragms “breathe”. The resulting air-flow cools the luminaire.
Silcotech developed an equally ad-vanced technology for the individual adaptation of hearing protection ear plugs. The body of the ear plug, which is subsequently overmoulded with a self- adhesive silicone (Shore hardness of 10), is made from PA 6.6. A membrane with an O-ring attached by means of a retain-er is also moulded on and pushed over the main body of the ear plug prior to subsequent fitting of the hearing protec-tion. The ear-plug blanks are inserted in a special headset before being “inflated” with RTV silicone to create a perfect fit in the inner ear of the individual wearer.
Automation is a must
“We’ve always used robot-ic systems for the handling of our parts because air-blow and brush removal are unsuitable for use with medical products,” explains Michael Maloney regarding his company’s automation strategy.
To date, Silcotech has purchased six electric machines in order to meet the requirements in terms of performance and precision even more precisely. These were of course also supplied by ARBURG.
Impres sive solutionsSilcotech: One stop sh op for complex silicone parts
Isolde Boettger and Michael Maloney,
Vice President and President of Silcotech,
are driving forward innovative elastomer deve-
lopments. These include ear plugs that can
be adapted via a headset (photo on right),
diaphragm rings for LED luminaires (centre photo)
or the latest Silcotech innovation: a 9-component
silicone smartphone bumper case (photo on left).
CUSTOMER REPORT
Photo: John Cox
INFOBOX
today 58/201518
PRODUCT
Orlando (USA), Milan (Italy), Guangzhou (China) – the freeformer exhibit has been
a crowd magnet at international trade fairs in recent months. In May, ARBURG completed its market intro-duction in America, Europe and Asia; serial production is now fully under-way (see page 19). Customers around the world can now enter into the world of industrial additive manufac-turing. In this endeavour, they receive intensive support from the ARBURG experts.
The sales launch began in Germany at the Fakuma 2014. During a conti-nent-by-continent market introduction, the freeformer was then shown live at numerous trade fairs and ARBURG events around the globe during the first half of 2015.
freeformer versatile in use
It produced, for example, bel-lows made from soft TPE, key fobs with an articulated ball joint, mobile phone housings and a gear card fea-turing complex geometries. At the Hannover Messe, the individualisation of mass-produced items by combin-ing injection moulding and additive
manu facturing was demonstrated (see page 8).
Big events in the US and China
Following the market introduction in North America, Friedrich Kanz, Managing Director of ARBURG USA, had the following to say: “For us, the NPE 2015 was an excellent platform for showcasing the potential of the freeformer in America. We registered high demand from customers who want to enter into industrial additive manufacturing using the freeformer. We have therefore set up a dedicated freeformer lab at our new US head-quarters.”
The last highlight of the inter-national market launch was the Chinaplas. “Our freeformer is able to do much more than simple 3D print-
ers. The month of May was the per-fect time to present the innovative system for additive manufacturing in Asia,” says Toni Tong, Managing Director of the ARBURG organisations in China. “Our experts are delighted to really get going with the project now. The central contact point for additive manufacturing is Shenzhen.”
Market introduction: freeformers ready for action worldwide
Launch complete!
The Managing Directors of ARBURG
USA and China, Friedrich Kanz
(photo on left) and Toni Tong (photo
below), reported lively interest in the
freeformer at the NPE (photo at top)
and Chinaplas trade fairs.
Photo: John Cox
today 58/2015 19
PRODUCT
The well-known ARBURG philos-ophy and a high level of vertical integration is maintained with
regard to the modules and assembly of the freeformer. From the outset, ARBURG has developed the freeform-er from the point of view of a machine manufacturer. During its manufacture at the Lossburg headquarters, all the experiences from injection moulding machine production have been taken into account.
On the subject of design and produc-On the subject of design and produc-On the subject of design and production of the freeformer, Managing Director Technology Engineering Heinz Gaub has the following to say: “We can derive a great deal from the development and man-ufacture of our electric ALLROUNDERs. In concrete terms, this means that we didn’t have to start from scratch because a solid basis for the freeformer specification was already available.”
Components produced in-house
Most of the freeformer components are produced in-house. For this purpose, existing production lines can be utilised. This applies for example to the construc-This applies for example to the construc-This applies for example to the construction of the control cabinets, which, like the ALLROUNDERS, are manufactured at our factory. The same applies to melt
preparation, cooling, fan assemblies and spindle drives, as well as the monitor brack-et, machine frame and cover, as well as the heater assembly. In ad-dition to the machine frame, the guarding is also completely new. It is partly made of GRP components and print-ed, shaped PC sheets, and is one of the few externally sourced components.
Flow manufacturing for the freeformer
With the new flow manufacturing pro-cess, the fully tested and ready-to-ship freeformer is produced in eight individual steps. These include assembly of the ma-chine frame, completion of the machine, electrical connection, commissioning, test run, assembly of the machine guard-ing, final checking, followed by ship-ment. During commissioning, the various quality-relevant measurements such as precision alignment of the part carrier are performed.
Before a freeformer leaves the factory, it is subjected to a process test during
which it produces a complex approval sample part. Only once this is reproduci-ble and fault-free and the geometric and mechanical parameters have been met, is the freeformer approved for delivery to the customer.
“Made by ARBURG”Machine construction expertise: High level of vertical integration for freeformerMachine construction expertise: High level of vertical integration for freeformer
All the freeformers undergo extensive testing
prior to shipment. Important assemblies and
components such as the spindle drive
(large photo) are produced in-house.
today 58/201520
CUSTOMER REPORT
Ç ığır Kimya is one of the worlds largest manufacturers of shoe care products, which it sells in
63 countries under the product name Silver. Efficiency is the top priority in every area of production. The compa-ny’s declared goal is unmanned pro-duction. 250,000 items are produced every hour in a high-tech, centrally controlled and monitored injection moulding production facility.
In Turkey, Çığır Kimya counts among the top 500 companies, is the country’s largest exporter with a share of 85 per-cent, and has the largest production ca-pacity in the shoe care product sector worldwide. “In order to subsist on the long-stagnating global shoe care prod-uct market, productivity and efficiency have to be continuously increased while energy and labour costs need to be re-duced,” explains Managing Director Hayrettin Başar regarding the situation. Both of these can be achieved highly successfully through the use of ARBURG injection moulding technology. The co-operation with ARBURG has been in place since 2001.
“Initially, reliable machine technology was our priority, but also comprehensive
production and quality management,” adds Hayrettin Başar.
Energy efficiency and speed
Çığır Kimya was one of the first companies in Turkey to use elec-companies in Turkey to use elec-companies in Turkey to use electric ALLROUNDERs. Eight hydraulic ALLROUNDER C machines, which also operate energy-efficiently thanks to the ARBURG energy saving system, were added to the six existing ALLDRIVE ma-chines.
A total of some 150 hot-runner injec-A total of some 150 hot-runner injec-A total of some 150 hot-runner injection moulds with 8 to 32 cavities are in operation in order to produce containers for shoe care products made from PP, PS for shoe care products made from PP, PS and PE. Most of the moulded parts have and PE. Most of the moulded parts have wall thicknesses under 0.5 millimetres wall thicknesses under 0.5 millimetres and are produced in a cycle time of beand are produced in a cycle time of be-tween four and five seconds.
“What really counts with our “What really counts with our machines is speed and low energy machines is speed and low energy consumption,” says Hayrettin Başar. consumption,” says Hayrettin Başar. “We consequently take care to en“We consequently take care to en-sure high overall plant effectiveness, sure high overall plant effectiveness, which is defined by the three factors which is defined by the three factors of availability, performance and quality. of availability, performance and quality. Here, the ARBURG host computer system Here, the ARBURG host computer system ALS helps us to optimally meet our specALS helps us to optimally meet our spec-ALS helps us to optimally meet our spec-ALS helps us to optimally meet our specifications.” All the machines are connectifications.” All the machines are connect-
ed to the ALS via special interfaces, in-cluding machines from third-party man-ufacturers. Incoming operating data and parameters regarding the current orders are entered and used for comprehensive planning of the injection moulding pro-duction.
ALS increases utilisation to 97 percent
Available capacities are fully exploited and production quality maintained at a high level. Following the introduction of ALS in 2012, capacity utilisation at the Çorlu plant increased from 60 to 97 per-cent. Hayrettin Başar is justifiably proud:
Polished perf ormancePolished perf ormanceÇığır Kimya: Advances thanks to all-round efficiency in the production of shoe care products
today 58/2015 21
Name: Çığır KimyaFounded: 1992 in Istanbul by Hayrettin BaşarPlants: Headquarters in Beylikdüzü, Istanbul, system and mould construction in Çatalca, Istanbul, production and assembly in Çorlu, TekirdağEmployees: 212Production area: 25,000 square metres, extension to 75,000 square metres planned by 2017Turnover: 48 million US dollars 2013)Products: System supplier of shoe care products; over 800 different “Silver” brand shoe and leather care products, exporting to 63 countries worldwideMachine fleet: 23 injection moulding machines, of which 14 ALLROUNDERsContact: www.new-silver.com
Polished perf ormancePolished perf ormanceÇığır Kimya: Advances thanks to all-round efficiency in the production of shoe care products
“Moreover, downtimes have been sig-nificantly reduced through standardised machine programmes. We have limited our operators’ access to the machines in order to completely rule out errors.”
Fully automated production at night
According to the successful Managing Director, a further example of efficiency is their two-shift production. “Owing to our energy policy, the machines only run at night and the filling and assembly lines only during the daytime. With the intro-duction of ALS, this transition worked perfectly.” Unmanned injection mould-ing production starts fully automatically at 10 p.m. The only job for the workers now is to sort the products and part
containers. In the event of downtimes, an operator simply shuts down the machine. The engineers then solve the problem the following day.
All these streamlining measures have meant that compared to 2012, 96 em-ployees currently manage three times the unit output.
Thanks to energy-efficient
ALLROUNDERs and the ARBURG
host computer system,
Çığır Kimya can produce the con-
tainers for the “Silver” brand shoe
and leather care products
extremely cost-effectively.
Photo: Çığir Kimya
INFOBOXINFOBOX
His drive: InnovationDaniele Triva: Pioneer in pre-diagnostics and analytics
today 58/2015 23
PEOPLE
Daniele Triva, CEO and General Manager of the Copan Group based in Brescia, Italy, was
closely associated with the plastics industry and was one of its innova-tors in the field of pre-diagnostics and analytics. Daniele Triva, who was involved in cooperation with ARBURG for many years, passed away in 2014 at the age of only 54 after a battle with cancer.
Triva's and his company's relationship with the Italian ARBURG subsidiary was particularly close. The subsidiary man-ager Björn Norén and especially Sales Consultant Bruno Pezzetti, who lived next door to Daniele Triva, knew him well and are fully aware of his great achievements in the field of medical technology.
Outstanding personality
Björn Norén describes the cooperation as follows: “I knew Daniele Triva for more than 20 years. From the very outset, he was a special kind of entrepreneur who had very clear and long-term ideas on the future of Copan. I’m delighted to have worked together with a personality who built up his life’s work in a way that few have succeeded in doing.” Bruno Pezetti was even closer to Triva’s family and com-pany: “Great enthusiasm and an extraor-dinary amount of generosity best charac-dinary amount of generosity best charac-dinary amount of generosity best characterise Daniele Triva. He was an important customer, but above all a loyal and honest partner and friend. I liked his managerial style, his employees' motivation and the cooperation with his suppliers.”
Daniele Triva dedicated his entire ca-reer to his life’s work, Copan. He assumed management of the company back in 1982 at only 23 years of age.
The good rep-utation of Copan Diagnostics is due to its pioneering role in the development and pro-duction of collection and transport systems for bacteriological and virological use. These include bacteriologi-cal swabs, virological transport media as well as molecular transport systems. Owing to its universal properties (chemical resistance, sterility in medical use), plastic is an important base material for the production of these components.
High quality of the transport contain-ers is characterised by the fact that their optimised airflow design ensures that the samples are maintained in optimum condi-tion prior to analysis. With these contain-ers, the so-called venturi effect is exploit-ed, which utilises an internal air pressure differential in order to extend the survival time of the bacteria during transport.
Technical innovation and quality
For Daniele Triva, the main focus was always on technical innovation and qual-ity. Entrepreneurial responsibility and so-cial commitment were always a priority, despite all of his business success. With the Peter Pan Centre, for example, Copan employees have an in-house nursery at their disposal. A further Triva project was his Futura Science Park. Here, he creat-ed an integrated platform for new ideas on the development of state-of-the-art, fully automated and digitalised analysis systems in pre-analytics and microbiol-
His drive: InnovationHis drive: InnovationHis drive: InnovationHis drive: InnovationDaniele Triva: Pioneer in pre-diagnostics and analyticsDaniele Triva: Pioneer in pre-diagnostics and analyticsDaniele Triva: Pioneer in pre-diagnostics and analyticsDaniele Triva: Pioneer in pre-diagnostics and analytics
ogy, bringing together science, practice and training into close, cross-discipline interaction. The resulting synergies led to work on innovations, for example hyper-spectral detection and identification of a variety of bacterial strains.
Daniele Triva (photo on left) was closely
associated with his life’s work, Copan:
Thanks to his work, the company (photo
above) today counts among the innovators in
the field of pre-diagnostics and analytics.
Photo: Copan
CUSTOMER REPORT
According to its own state-ments, Tempco Manufacturing (S) Pte Ltd from Singapore is
the largest moist-polyester or BMC injection moulders in the ASEAN area. The company’s philosophy: Tempco takes on projects that are hard to implement, with which no-one is familiar, or that nobody else wants to assume.
Matthew Goh, owner and Managing Director, says: “We always produce to the highest quality and at the best price.” From its Singapore base, the exporting company supplies a broad range of indus-tries with products made from thermo-plastics and thermosets such as moist pol-yester (BMC).
Its main customers operate in South-East Asia and China. They
are primarily active in the electrical fuse system, industrial motor, renewable ener-gy and biotechnology sectors. Its global-ly established customers include General Electric, Hager, Terasaki and Hitachi.
Entire value-added chain
Tempco provides support to its custom-ers as a one-stop shop partner across the entire value-added chain: from selection of the suitable material to product design, mould design and construction, through to serial production.
The company decided to concentrate on thermoset processing because there are few injection moulders in the Asian region who are able to negotiate the en-try hurdles and possess the requisite processing
Thermoset know-h ow for AsiaTempco: Cost-effective production thanks to BMC injection moulding and Singapore office
Photo: Tempco
today 58/2015 25
Name: Tempco Manufacturing (S) Pte LtdFounded: 1983 by Matthew GohProducts: BMC overmoulded digital motors, thermoset components for biotechnology and electronicsEmployees: 150Production: Approx. 10,000 square metres at the central location in SingaporeMachine fleet: 105 injection moulding machines, of which 99 ALLROUNDERs in the clamping force range between 150 and 5,000 kNContact: www.tempco.com.sg
Thermoset know-h ow for AsiaTempco: Cost-effective production thanks to BMC injection moulding and Singapore office
expertise. Because BMC only shrinks very slightly following processing, precise di-mensions can be maintained and subse-quent finishing operations are completely dispensed with. In this manner, a large number of die-cast parts, for example, can be substituted.
BMC reduces manufacturing costs significantly
Two examples illustrate the significant cost reductions achievable by converting from aluminium die-casting to BMC injection moulding. In the case
of a servo motor housing, the dimensional stabili-
ty of which was
also improved, the part costs were re-duced from 23 to 8 US dollars. The pro-duction of an optical housing was even 85 percent cheaper, with a cost per unit reduction from 110 to 15 US dollars.
Singapore location advantage
By virtue of being based in Singapore, Tempco also benefits from location ad-vantages. All the base materials can be imported from around the globe without trade restrictions. Moreover, the constant temperature conditions in the city state are ideally suited for processing BMC (a material with a short shelf life) quickly with machines in operation around the clock. This results in stable product prices at a very competitive level, in particular also for China.
Since its foundation, Tempco has worked with ARBURG injection mould-
ing technology. In addition to horizontal hydraulic ma-
chines, vertical mod-els are also employed,
which are adapted to the production requirements at
Tempco. The 50 thermoset ALLROUNDERs feature special
equipment for BMC processing, such as special screw geometries
and INJESTER tamping devices. The vertical ALLROUNDERs can produce
both with inserts or using the injection compression moulding process. The ma-
chines are connected to CNC units that automatically de-flash all the parts fol-lowing injection moulding. Tempco and ARBURG are located in the immediate vicinity of one another in Singapore. This
Tempco owner Matthew Goh (photo
above) plans to double his thermoset
capacity. The company manufactures
products for electrical fuse systems and
biotechnology (photo below).
keeps response times short and joint dis-cussions regarding projects can be held at short notice: a further unbeatable advan-tage of this cooperation.
INFOBOX
today 58/201526
Oliver Schäfer, Technical Information
TECH TALK
Decisive for efficient produc-tion is that the manufactur-ing process is continuously
reviewed and developed further. In order to identify and assess all the possible alternatives and the poten-tial they offer, overarching specialist knowledge is increasingly required. One good example is the use of cube moulds. A detailed comparison with conventional mould technology can lead to surprising results.
The advantages of cube moulds is clear: the four mould sides usable for pro-duction and the two adjacent parting lines (see examples on page 14). Individual pro-duction steps such as mould filling, cool-ing or part removal can run simultaneously and cycle times can be shortened by up to 30 percent. Further process steps such as insertion, assembly and quality assurance can be integrated without extending the
cycle time. Double the number of cavities is available over the same mould mounting surface.
Cube mould technology increases productivity
The required unit volumes can there-fore be achieved with fewer or smaller machines. This also reduces machine footprints, as well as energy and cool-ing costs. The advantages of cube mould technology are however offset by signifi-cantly higher procurement costs, includ-ing for the machine. So, the question re-mains: When does this technology pay?
Based on the example of a two-com-ponent closure for water bottles, con-ventional rotary table technology is compared with cube mould technology in the case of multi-component injec-tion moulding (diagram). The basis for calculating the manufacturing costs are
the following framework data and defi-nitions:• Required annual sales volumes• Possible system combinations: range of
moulds from 8 to 32 cavities and of ALLROUNDERS from 2,500 to 5,000 kN clamping force
• Process-dependent cycle times: 13 seconds for rotary table technology and 9.5 seconds for cube mould tech-nology because cooling and ejection occur simultaneously with the injection moulding process
A graphical representation of the cal-culation makes it clear when which invest-ment decision is recommendable: as soon as a machine with rotary table mould is no longer sufficient in order to produce the required unit volumes, use of a cube mould begins to make economic sense. In the example, this is the case at an annual sales volume of approximately 45 million
Calculation reaps b enefitsProduction efficiency reduces unit costs – cube-mould case study
TECH TALK
27today 58/2015 27
10 20 30 40 50 70 90 110
130
150
170
190
3
3,5
4
60 80 100
120
140
160
180
2,5
2 2 3 4 3
Calculation reaps b enefitsclosures. With increasing unit volumes, there may be jumps in manufacturing costs, which are associated with the num-ber of machines required.
Cube mould technology is ideal for high-volume batches
The level of capacity utilisation also plays a part. The higher this is for a system combination, the more probable it is that
one technology is more cost-effective than another. During the production of large unit volumes, a considerable reduc-tion in production costs can be achieved using cube moulds. This is particularly the case when fewer machines can be used as a result and/or the cycle time can be significantly reduced. The following rule of thumb applies: in the case of parts with cycle times above ten seconds in conjunc-tion with the relevant sales volumes, it is
Increase revenue – with the right
strategy (photo above). A detailed com-
parison of manufacturing costs for a
two-component closure (diagram)
illustrates the savings potential of cube
moulds with rising unit volumes.
worth making the calculations – regard-less of the relevant industry.
Machines
Rotary table technology
Cube-mould technology[million units/year]
[ce
nts
/un
it]
THE ART OFPRODUCTION EFFICIENCY
Finding the decisive perspective – that is true art. Around
3.5 billion high-quality plastic parts are produced every day
worldwide on ALLROUNDER machines. If you want to
produce efficiently, we are the perfect choice. We ensure your
economic success. And your future perspectives!
www.arburg.com
