+ All Categories
Home > Documents > THE BOSS LED DIODE DISTORTION Manual - Igor Nembrini · THE BOSS LED DIODE DISTORTION ... 1 - Open...

THE BOSS LED DIODE DISTORTION Manual - Igor Nembrini · THE BOSS LED DIODE DISTORTION ... 1 - Open...

Date post: 24-Aug-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
7
THE BOSS LED DIODE DISTORTION Manual
Transcript
Page 1: THE BOSS LED DIODE DISTORTION Manual - Igor Nembrini · THE BOSS LED DIODE DISTORTION ... 1 - Open the manual and show the informations about the plugin. 2 - + and - buttons allow

THE BOSS LED DIODE DISTORTION Manual

Page 2: THE BOSS LED DIODE DISTORTION Manual - Igor Nembrini · THE BOSS LED DIODE DISTORTION ... 1 - Open the manual and show the informations about the plugin. 2 - + and - buttons allow

THE BOSS LED DIODE DISTORTION

Congratulations on choosing our new THE BOSS LED DIODE DISTORTION.

The Boss plugin is based on circuit which uses two stages of gain with led diode clipping and tone controls.The gain comes from a TL072 low-noise operational amplifier (op-amps) chip.This plugin is based on a device which is made for high-fidelity audio preamplifier applications and uses junction field effect transistors (JFETs) to achieve good gain with low noise and low harmonic distortion.

The Boss tone control is highly interactive, adjusting one of the controls will affect the other two.Players got used to it and its ability to create many different voicings.You can adjust the tone to suit pretty much any amplifier.

The expanded Gain structure allows you to steer your tone through many different styles. From natural sounding vintage valve amp break-up, ideal for singing blues, to chunky British classic rock tones, right through to modern day super-saturation, for liquid sustain and grinding chords.

Page 3: THE BOSS LED DIODE DISTORTION Manual - Igor Nembrini · THE BOSS LED DIODE DISTORTION ... 1 - Open the manual and show the informations about the plugin. 2 - + and - buttons allow

THE BOSS LED DIODE DISTORTION

DELAY SECTION

1 - GAIN: This controls the intensity of the drive and will provide a stunning range of overdrive selections.Lower settings will give a simple volume boost, while advanced settings will provide screaming solo sounds.2 - BASS: Three-band EQ network which combines to give the fullest selection of guitar tones.Bass controls the lower frequencies giving a range from thudding, heavy rhythm, to tight and punchy solo response.3 - MIDDLE: This control provides the key to an unbelievable range of distortion tones.When backed off, the sound is smooth and fat for more lyrical blues/rock playing styles. Increasing the contour chan-ges the character of the mid response and enhances the treble and bass frequencies.4 - TREBLE: High-end response control, which tailors the attack and enhances the harmonic content. All three EQ controls are truly interactive, letting the player dial in anything from hard-driving, modern British distortion, to the swe-et, syrupy sustain of classic Vintage models.5 - LEVEL: Provides control of the overall level and amount of boost.

2 3 41 5

Page 4: THE BOSS LED DIODE DISTORTION Manual - Igor Nembrini · THE BOSS LED DIODE DISTORTION ... 1 - Open the manual and show the informations about the plugin. 2 - + and - buttons allow

THE BOSS LED DIODE DISTORTION

DELAY SECTION

1 - Switch: On/off switch to bypass or activate the plugin with indicator LED to show the status.

1

Page 5: THE BOSS LED DIODE DISTORTION Manual - Igor Nembrini · THE BOSS LED DIODE DISTORTION ... 1 - Open the manual and show the informations about the plugin. 2 - + and - buttons allow

THE BOSS LED DIODE DISTORTION

Toolbar

1 2 3 4 5 4

1 - Open the manual and show the informations about the plugin.

2 - + and - buttons allow you to scroll through the presets.

3 - Undo/Redo changes made to the parameters of the plugin at any time.

4 - With A/B banks, it is possible to compare two different settings in an easy way. It is also possible to compare pre-sets by loading them in the two different A/B banks.The red highlight will show the currently selected bank and what you will modify/save.

5 - Copy the settings from a bank to another, so you can make slight changes to the controls and compare the two settings for example.

Page 6: THE BOSS LED DIODE DISTORTION Manual - Igor Nembrini · THE BOSS LED DIODE DISTORTION ... 1 - Open the manual and show the informations about the plugin. 2 - + and - buttons allow

THE BOSS LED DIODE DISTORTION

2 3 4 5

1 - Shows the active preset. Click on the label to see the preset list. 2 - Allow you to override the current selected preset.

3 - Save the current selected preset as a new preset with a name of your choice.

4 - Delete the selected preset. 5 - Bypass the plugin in order to compare your processed and unprocessed signal.

1

Page 7: THE BOSS LED DIODE DISTORTION Manual - Igor Nembrini · THE BOSS LED DIODE DISTORTION ... 1 - Open the manual and show the informations about the plugin. 2 - + and - buttons allow

Recommended