PONSSE BUFFALOKING

OF HEAVY LOADSTHE KING-SIZE CARRIER

TAKE FULL ADVANTAGE OF THE

KING SIZE PERFORMANCE

PONSSE BuffaloKing provides its operator with a powerful Ponsse K100+ loader, large carrying capacity, powerful Mercedes-Benz engine and a strong frame. With a carrying capacity of 18 tonnes (39,683 lbs), this machine was designed to be reliable and powerful with the minimum additional weight.

OptiControl control system, it provides utmost efficiency and cost-effective-ness along its entire maximum reach of 9.5 m (31.2 ft).

The new cabin offers plenty of storage space, the most ergonomic controls available in the market and excellent visibility.

POWER AND PRECISION BuffaloKing’s strong hydraulics and precise loader control enable easy and secure loading operation.

PONSSE MOBILE FLEET MANAGEMENT makes itpossible to use the system with mobile devices(phones and tablets with Windows, iOS orAndroid operating systems).

PONSSE BuffaloKing’s frame struc-ture is very rigid, and components and service points have been positioned considering the ease of serviceability. In addition, the machine’s service inter-val has been increased to 1,800 hours. Extremely long service intervals increase effective operating hours and reduce maintenance costs.

As with all other PONSSE forward-ers, the hydraulic capacity of PONSSE BuffaloKing has no comparison in this size class. Combined with the powerful K100+ loader and intelligent

PONSSE FLEET MANAGEMENTWith Fleet Management, machine entrepreneurs can at any time check the location of the forest machine on the map or the current situation of the stand using a computer or mobile device. Forest machines equipped with data transfer and GPS transmit the data automatically to an Internet-based reporting service.

The Fleet Management service offers reports to monitor machine production and use, plan and anticipate maintenance, and control low-bed transportation.

ENGINEA more powerful next generationMercedes-Benz engine with highertorque (210 kW / 1150 Nm) isavailable in Europe. Fewer emissions,more power!

ERGONOMICSErgonomics and ease of use areimportant factors when it comes toproductivity. The completely new cabinoffers plenty of storage space, themost ergonomic controls available inthe market and excellent visibilitywhich is characteristic of all PONSSEforest machines.

FRAMESA simple and strong frame structure.In addition to reliability, the functionalpositioning and serviceability ofcomponents are typical characteristicsof the structure.

EVERY DETAIL DESIGNED FOR

GUARANTEED POWERAND COMFORT

SERVICEABILITYEase of maintenance can be achievedthrough an improved positioning ofservice points, service lights and safeservice platforms. Furthermore, high quality components enable extremely long service intervals of up to 1,800hours.

LOADERManeuvering the powerful PONSSE K100+ loader is easy and effective. Loader reach is 7,8 or 9,5 meters (26/31 feet).

TRANSMISSIONThe upgraded transmission offersmore practical tractive force and aneven better feel in all types of terrain.

The new technology and improved hydraulics offer longer service intervals, increasing effective operating hours and reducing operating costs. The service interval of PONSSE forest machines

has been increased from the previous 1,200 hours to 1,800 hours – for more operating time. In addition, easy access to important components speeds up maintenance. Important developments

in the new product series include the positioning of components and service points, as well as the ease of maintenan-ce, as requested by our customers.

THE MOST COMFORTABLEOFFICE IN THE FIELDTHE FULLY UPGRADED PONSSE BUFFALOKING CABIN offers a viewpoint to the latest forest machine technology. It provides a working environment for skilled professionals who value comfort, safety and ergonomics. The er-gonomics of the controls represent the cutting edge of forest machines and, thanks to the large cabin, wide windows and thin window pillars, the visibility from the cabin is excellent in all directions. The PONSSE Comfort forest machine user interface has been developed together with operators and it utilises years of experience.

THE PONSSE ECODRIVE application provides operators with useful and easily understandable information about the use of the machine. Through the machine’s control system, it monitors machine load and fuel consumption for each function and indicates in real time whether the operator’s working methods and machine controls are economical and efficient. Eco-Drive lets you focus on what is essential in order to develop working methods.

LESS SERVICE, MORE OPERATION MORE POWER – MORE ECONOMICAL

A strong and eco-friendly six-cylinder Mercedes-Benz engine of the EU Stage IV emission level (210 kW/286 hp, 1,150 Nm) growls in the Ponsse engine compartment. The service interval of EU Stage IV engines has been increased from 600 hours to 900 hours – for longer operating periods*. The SCR exhaust gas after-treatment system and the cooled EGR system significantly reduce NOx and particle emissions.

Benefits of the new technology include a better response to sudden needs of power and better fuel economy. The new transmis-sion and engine technology enable accura-te stability control and efficient working in even the most demanding conditions

* When using Mercedes-Benz 228.5 or 228.51 specification oil.

Outside European countries a Tier 3 levelMercedes-Benz engine is used, producing205 kW/275 hp and 1,100 Nm of torque.The reliable and powerful Tier 3 engine has600 hours service interval and a clear andsimple structure for easy maintenance.

INSPECTION POINTSDaily checks are easy to performwithout climbing or stretching.

EASY ACCESSIBILITYBatteries, Webasto heatingsystems, the central lubricationunit, electrical centre, pneumaticconnectors and measuring pointsare easily accessible underopening bumper casings.

SERVICE LIGHTSService lights are located inthe bumper casings and under the cabin and engine cover.

STORAGE SPACE FORACCESSORIESThe machine provides plentyof storage space for tools andaccessories in various loca-tions.

SERVICE PLATFORMS AND STEPSThe anti-slip service platformsand attachments of the newservice steps enable easier andsafer maintenance procedures.

CLARITY FOR MAINTENANCEMachine designs have beenclarified and machine modelsstandardised. In addition, anowner’s manual and a servicebook are always delivered withthe machine.

THE BEST COACH FOR OPERATORS

10 600–10 860 + glide bunk 700 mm (417–428 in + glide bunk 28 in)

3 910 mm (154 in)

3 910 mm (154 in)

DIMENSIONSMinimum weight: 6-wheeler 19 200 kg (42,329 lbs) 8-wheeler 20 600 kg (45,415 lbs)Typical weight: 6-wheeler 19 700 kg (43,431 lbs) 8-wheeler 21 100 kg (46,517 lbs)Length: 10 600–10 860 + glide bunk 700 mm (417–428 in + glide bunk 28 in)Width: 2 990–3 300 mm (118–130 in)Transportation height: 3 910 mm (154 in)Ground clearance: 730 mm (28.7 in)Steering angle: ± 44 degreesLOADERModel: PONSSE K100+Lifting moment (gross): 160 kNm (118.001 lb-ft)Reach: S / M: 7,8/9,5 m (26/31 ft)TYRES6-wheeler 34” Front 26.5” Back8-wheeler 26.5” Front 26.5” BackGRAPPLEModel: Several different grapple alternatives

ENGINEModel: Mercedes-Benz OM936 LA EU Stage IV (Europe) Mercedes-Benz OM906 LA EU Stage IIIA (other countries)Power: EU Stage IV: 210 kW (286 hp), IIIA: 205 kW (275 hp)Torque: 1 200–1 600 rpm (EU Stage IV: 1 150 Nm, IIIA: 1100 Nm)Tractive force: 210 kN (49,500 lbf)Driving speed : 0–20 km/h (0–12 mph)Fuel tank volume: 200 l (53 gal US)HYDRAULIC SYSTEMControl system: PONSSE OptiControlWorking pump: 190 cm3 (11.6 cu in)Oil tank volume: 170 l (45 gal US)LOAD SPACECapacity: 18 000 kg (39,683 lbs)Load space cross-sectional area: 5,2–5,8 m2 (56–63 sq ft)Load space length: 5 190–5 450 mm + glide bunk 700 mm

(204–214 in + glide bunk 28 in)Log gate can be moved hydraulically.

PONSSE BUFFALOKING

PONSSE BUFFALOKING 8W

PONSSE BUFFALOKING 6W

The

man

ufac

ture

r re

serv

es t

he r

ight

to

mak

e te

chni

cal c

hang

es a

nd im

prov

emen

ts.

PON

SSE

Buffa

loKi

ng 0

2/16

1.

Cop

yrig

ht ©

201

6 Po

nsse

Plc

. PO

NSS

E is

a r

egis

tere

d tr

adem

ark

of P

onss

e Pl

c an

d ot

her

prod

uct

nam

es a

re t

rade

mar

ks o

f Pon

sse

Plc.

10 600–10 860 + glide bunk 700 mm (417–428 in + glide bunk 28 in)

A logger’s best friendwww.ponsse.com

Ponssentie 22FI-74200 VieremäFINLANDTel. +358 20 768 800Fax +358 20 768 8690www.ponsse.com

Ponsse North America, Inc.4400 International LaneRhinelander, WI 54501USATel. 715 369 4833Fax 715 369 4838

Ponsse UK Ltd.Unit 3, Broomhouses 1Industrial EstateLockerbie,DG11 2RZUNITED KINGDOMTel. +44 1576 203 000Fax +44 1576 202 202