The Only Fiber Optic Cable You Will Ever Need!

Micro Armor Fiber®

TINIFIBER™ WINS 2015 PLATINUM LEVEL GOVIES AWARD FROM 1105 MEDIA AT

ISC WEST SECURITY SHOW IN THE MICRO ARMOR CATEGORY

2015 Govies Award

What is Micro Armor Fiber®?

Micro Armor Fiber® is a new productcategory that incorporates a tightlywrapped stainless steel coil designedto provide the lightest, strongest andmost flexible solution.

What is Micro Armor Fiber®? The Micro Armor Fiber® solution is about

protecting the fragile glass fiber strandswithin the cable jacket

Micro Armor Fiber® stainless steel coiledtubular design (combined with Kevlar®)adds tensile strength, unparalleleddurability and crush resistance for indoorand outdoor usage

Provides future proofing the project byadding ruggedness in the smallest ODfrom 1 to 144 fiber strands that includesMultimode OM1, OM3, OM4 andSingleMode OS2

TiniFiber’s outer jacket are made to meetall required specifications and externalconditions from Riser, Plenum,Indoor/Outdoor, LSHZ, Direct Burial,Industrial and Harsh Environments as wellas added water block for undergroundconduits when necessary

Micro Armor Fiber® are available with allstandard connectors

The smallest form factor armored fiber presently available

Micro Armor Fiber® by TiniFiber™ is a revolutionary innovation for the fiber optic cableindustry that provides a number of advantages for the Telco, CATV, IT, Security,Broadband, Government and for all commercial projects. The Micro Armor Fiber® isencased around the smallest Outer Diameter (OD) stainless steel coiled tubular outerjacket solution for superior durability, bendability and ruggedness that makes routingand installation faster and easier

TiniFiber™ provides the best cost/value propostion of any fiber optic armormanufactured today

Micro Armor Fiber® is approximately 65% smaller and 75% lighter in weight of thetypical Aluminum Interlocking Armor (AIA)

TiniFiber™ cable reduces the cost of armored fiber cable projects by loweringmanpower hours for installations

Micro Armor Fiber® cables exceed the industry performance standards

Micro Armor Fiber® and power in a single jacket will lower cost and save time/labor toinstall Hybrid Fiber + Power cables

PROVIDES PEACE OF MIND AND PROTECTS YOUR INVESTMENT FOR THE LIFE OF THE PROJECT

Why Micro Armor Fiber®?

Micro Armor Fiber® will have many applications with quality, durability and competitive pricing:

Can be used in any channel from Telco, CATV, WAN,LAN, SAN, Broadcast, DAS, Communication, Security,Indoor, Outdoor as well as Aerial Installations andregardless of environmental conditions

Data centers, IT, communications and securitysolutions that pose challenges regarding tight spacesand small conduits for small/medium businesses(SMB)

FTTD/FTTH – Best in class Micro Armor Fiber® opticcable where speed and big data cannot becompromised from the server to the patch panel andto the desk or home

Municipalities and premises who use it for connectingthroughout buildings, schools, departments, smarttraffic lights and CCTV surveillance systems

Where To Use Micro Armor Fiber®

Revolutionary Fiber Optic Solution

Micro Armor Fiber® is the mostuniversal fiber optic solution in themarket today With the attributes of a basic fiber optic

cable, plus the strength, durability andruggedness of armored cables

Micro Armor Fiber® can be used in anychannel from Bulk to Patch Cords for: WAN, LAN, SAN, Broadcast, Security,

CATV, Telco, Communication, Indoor,Outdoor Aerial Installations andregardless of environmental conditions

Top 5 Network Fiber Optic Concerns

“SURVEY FROM INSTALLERS, DESIGNERS, CONTRACTORS, END-USERS”

1. Maintenance and downtime from fiber optics (cracking, bending,pinching of the glass fiber optic cable)

2. Space constraints through conduits, support systems and data cabinets

3. Smaller size fiber optic cable for higher density applications

4. A replacement to the current Aluminum Interlock Armor (AIA) jacket thatis bulky and heavy for 1000 ft. rolls

5. Current AIA takes additional manpower to install and transport to the job

Top 5 Network Fiber Optic Solutions 1. Maintenance and downtime from fiber optics (cracking, bending, pinching of

the glass fiber optic cable)

Micro Armor Fiber® stainless steel coiled tubular armor design (combined with Kevlar®) addstensile strength, unparalleled durability as well as crush and rodent resistance for indoor andoutdoor usage for superior protection of the fiber optic glass

2. Space constraints through conduits, support systems and data cabinets

Micro Armor Fiber® provides the industry’s smallest outer diameter (OD) armor that makesrouting and installation easier through the most challenging spaces

3. Smaller size fiber optic cable for higher density applications

Provides future proofing for the project by adding ruggedness in the smallest OD from 1 to 144strands in a single armored jacket

4. A replacement to the current Aluminum Interlock Armor (AIA) jacket that isbulky and heavy for 1000 ft. rolls

Micro Armor Fiber® is approximately 65% smaller and 75% lighter than typical AluminumInterlocking Armor (AIA)

5. Current AIA takes additional manpower to install and transport to the job

Micro Armor Fiber® will lower costs and saving time and labor to install as a value to the end-user

Warranty

The 25-Year Limited Warranty (see warranty guidelines) is formanufacturing defect and will add assurance based on our high-qualityengineering and manufacturing.

Patch Cord Solutions

Conventional cluttered patch cords can lead to faulty connectivity

The performance of a fiber opticnetwork can be undermined whenthe performance of the patch cordsused for connecting communicationsequipment are not top quality

Micro Armor Fiber® is the “END toEND” solution and provides the highquality, bend radius to ensure theproper connection and highperformance for communication

TiniFiber™ tests all products forquality assurance

All company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Customer Sampling

Every year, the Super Bowl outdoor events attract hundreds of thousands ofpedestrian and vehicle traffic. The NFL needed a highly crush-proof, flexible, highquality cable and with the smallest OD fiber armor. They turned to TiniFiber™ forthe solution.

During the 2014 New York City events in Times Square on “Super Bowl Blvd” therewere thousands of vehicles and heavy foot traffic running over the Micro Armorcables without incident. The NFL again utilized the TiniFiber™ for the 2015Phoenix Super Bowl events and will recommend the product for other events inthe future.

- NFL Project Manager

NFL Super Bowl Outdoor Fiber

AOL Corporate was looking for best in class Fiber To The Desk (FTTD) cablingand patch cords. Since they were transporting huge amounts of data, it wasimperative to have high bandwidth and zero down-time. The right fibersolution had to provide quality and reliability from the server to the patchpanel and to the desk. AOL turned to TiniFiber’s Micro-Armor Fiber™ optics forits FTTD needs.

- Architect Developer, AOL

AOL Corporate FTTD Solution

“Winthrop Hospital has undergone an expansion of our Research Building that useshigh-tech training for future technologies in the hospital.

A high end, secured fiber optic network backbone had to be implemented. Wefound that TiniFiber™ Micro Armor Fiber® optic cable was the perfect solution. Thehighly flexible, small OD size saved space in both the pathways and the racks andmade for a smooth installation and within budget. The stainless steel armorprovided the extra strength and security over regular fiber cables. Plenum rated andthe best Corning glass made it a no brainer.”

- Chris Iorio, Chief Information Officer

Winthrop Hospital, Mineola, NY

Winthrop Hospital Research Building

Micro Armor vs. AIA

TiniFiber™ Micro Armor Fiber®

VS.Aluminum Interlocking Armor

When comparing 1000 feet of cabling, Micro ArmorFiber® is approximately 65% smaller and 75% lighter thanAluminum Interlocking Armor (AIA).

Micro Armor Fiber® Stainless Steel Tubular

Coiled ArmorVS.

Aluminum Interlocking Armor (AIA)

Micro Armor Fiber® vs. AIA

Micro Armor Fiber® vs. AIA

When comparing 300 feet of Aluminum Interlocking Armor,be prepared to have two (2) strong guys to carry that reelor… the lightweight TiniFiber™ 300 feet that you can haveanyone bring to the job site!

Bend at your knees!

To carry that large 300 ft.6-strand of Aluminum Interlocking Armor (AIA)

Hmm… Light as a feather! Saves money and time to deliver and install at the site for the same 6-strand Micro Armor Fiber®

Head to Head Competitive Analysis

Aluminum Interlocking Armor (AIA)

Aluminum Interlocking Armored (AIA) cablesare standard fiber optic cables inside aspirally wrapped interlocking armor forenhanced crush resistance and ruggedness.

The downside of AIA cable that it is bulkyand has been known to crush the fiber whenthe aluminum casing is compromised.

Fiber Count Diameter Weight* Bendable Armor

12 13.90 mm 395 lbs. 20.00XD

Fiber Count Diameter Weight* Bendable Armor

12 5.5 mm 99.20 lbs. 10.00XD

Micro Armor Fiber® Stainless Steel

TiniFiber™ Micro Armor Fiber® optic cableis a stainless steel coiled tubular armoredsolution that is designed as the smallestand lightest with enhanced crushresistance and ruggedness. Available inriser and plenum constructions. Stainlesssteel micro armor can be used for allgeneral usage, patch and inside/outsideplant applications in place of a conduit.

12 Strands - Based on 1000 feet

*This calculation does not include the actual weight of the reel

Cost Analysis Labor TiniFiber vs. AIA Armor for FTTD

Simulation Project for TiniFiber™ vs. AIA to supply and install the following:

Two (2) runs of 4-Strand 50/125 Multimode OM3 armored plenum fiber optic runs with LC connectors on both sides

Sixteen (16) LC connectors Two (2) locations Two (2) fiber optic couplers for LC connectors and two (2) face plates with 4-ports One (1) 12-port fiber optic rack mounted patch panel One (1) wire manager

TiniFiber™ Micro Armor Fiber® 4 Strand OM3 – Install = $3,001.00 Material - TiniFiber is $531 + $300 + $320 =

$1,151.00 1 x 275 feet $337.00 1 x 150 feet $194.00 Pre-terminated with 4LC-4 LC with secure

pulling eye $75.00 each side Fiber box $260.00, Two (2) Loaded Face

plates @ $30.00 = $320 Labor - 2 men x 12hrs at $75.00/hr. = $1,800.00 Delivery = $50.00

Competitive Aluminum Interlock Armor 4 Strand OM3 – Install = $3,801.00 Material – AIA Fiber is $581 +$300+ $320 =

$1,201.00 1 x 275 feet $361.00 1 x 150 feet $220.00 Pre-terminated with 4LC - 4LC with secure

pulling eye $75.00 each side Fiber box $260.00, Two (2) Loaded Face

plates@$30 = $320 Labor - 2 men x 16hrs at $75.00/hr. = $2,400.00 Delivery = $200.00

*Pricing based upon 6/1/15 price sheet

Cost Analysis Labor TiniFiber vs. AIA Armor

Savings in Cost and LaborTiniFiber™ Saved $5,975 in labor

and materials or 45% Total Savings!!!

Micro Armor Fiber® CableSampling of TiniFiber™ Solutions

Fiber OpticsCore Cladding (Omxrefers to TIA/ISO types)

Attenuation @850/1300 nm, Typical (TIA*)

Bandwidth @850/1300 nm

Application/Notes

50/125 microns (OM4)

3/1 dB/km (3.5/1.5 dB/km)

3600/500 MHz-km Optimized for 850 nm VCSELs, higher speed for 10 GB/s and above

50/125 microns (OM3)

3/1 dB/km (3.5/1.5 dB/km)

2000/500 MHz-km Optimized for 850 nm VCSELs

62.5/125 microns (OM1)

3/1 dB/km (3.5/1.5 dB/km)

200/500 MHz-km LAN fiber pre-GB/s networks

9/125 microns (OS2 B1.1 or G.652)

0.4/0.25 dB/km

@1310/1550nm

HIGH! ~100 Terahertz

Singlemode

for Telco CATV/high speed LANs

4 Core OM1, OM3, OM4, & OS2 Sampling

OS2 SingleMode fiber has a much smaller core, onlyabout 9 microns used for telephony and CATV withlaser sources at 1310 and 1550 nm because it haslower loss and virtually infinite bandwidth.

OM4 is a "universal medium" and supports all existingmultimode applications. With a minimum 4700MHz·km EMB bandwidth and 3500 MHz·km OFLbandwidth at 850 nm, OM4 fiber can support higherspeeds and longer distances.

OM3 or laser-optimized 50/125 µm multi-mode fiberthat meet this designation provide sufficientbandwidth to support 10 Gigabit Ethernet up to 300meters.

OM1 62.5/125 fiber has a 62.5 micron core and a 125micron cladding. This cable supports up to 1 Gigabitapplications.

Micro Armor Fiber® + Power Sampling

The TiniFiber™ Hybrid Fiber + Power solution allows the installer to run

Micro Armor Fiber® optics and power to devices such as cameras in a

single jacket that saves time, space and costs for the end-user.

Available in a variety of glass types and strand counts, the fiber component is designed asneeded. The “Power Cables” can be 2, 3 or 4 conductor with 12 AWG to 22 AWG options.The basic construction is two (2) strands of SingleMode Fiber and 18 AWG/2 conductor allunder one (1) outdoor jacket.

MPO Kit Spec Sheet

MPO Kits

OS2 Cassette 12 Duplex LC Kit24 Strand # MTF-OS2

OM1 Cassette 12 Duplex LC Kit24 Strand # MTF-OM1

OM3 Cassette 6 Duplex LC Kit12 Strand # MTF-OM3

OM4 Cassette 6 Duplex LC Kit12 Strand # MTF-OM4

Popular Termination Solutions ST has been a popular connector for many

years. Bayonet locking design keeps the STsecurely on equipment. Used widely in legacysystems and still the standard connector forbroadcast applications

FC connector has a threaded body, which wasdesigned for use in high-vibrationenvironments. Mostly used in Singlemodeapplications

SC is a snap-in connector that is widely usedin both Multimode and Singlemode systems

LC is a newer connector that uses a 1.25 mmferrule, half the size of the SC/ST. Becomingthe new most popular connector for bothSingle and Multimode fiber

Popular Termination SolutionsMTRJ is a duplex connector with both

fibers in a single polymer ferrule. It usespins for alignment and has male andfemale versions

Opti-Jack is a neat, rugged duplexconnector cleverly designed around twoST-type ferrules in a package the size ofa RJ-45

E2000/LX-5 is like a LC but with a shutterover the end of the fiber

MTP®/MPO is 12 or 24 fiber connectorfor high density applications. Its mainuse is for pre-terminated cableassemblies

Summary

TiniFiber™ is an American Engineered Micro Armor Fiber®(patent-pending) solution that has surpassed expectations ofall customers and have provided testimonials on the costvalue proposition, ease of installation as well as exceedingdurability, ruggedness, flexibility and lightest weight armoredcable in the market today.

Please contact your local representative orRoman Krawczyk, Chief Technical Officer (CTO)

95 Toledo StreetFarmingdale, NY 11735

631.932.2253Roman@tinifiber.com

www.tinifiber.com