+ All Categories
Home > Documents > THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS...

THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS...

Date post: 04-Sep-2019
Category:
Upload: others
View: 86 times
Download: 8 times
Share this document with a friend
52
THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS AND ACCESSORIES BOOKLET
Transcript
Page 1: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS AND ACCESSORIES BOOKLET

Page 2: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

The SAN plus Analyzer logo

Please read the following information about this booklet:-

When placing an order always include the catalog number and the description of the required item.

For a description of the terms and conditions for ordering please contact your local representative or Skalar's Headquarters in the Netherlands.

Each item is supplied individually unless otherwise stated.

For all fuses see your user manual.

For any item not included in this booklet please contact your local representative or Skalar's Headquarters in the Netherlands.

Skalar reserves the right to change specifications and appearance of the equipment without further notification.

On page 3 Table of contents these symbels are “buttons” click on the number to go directly to the corresponding page.

To go directly to the ʻTable of contentsʼ click on the gray area on either side of the page.

Publication No: 0108001G. US Issue date: November 2008

© Copyright SkalarP.O. Box 32374800 DE BREDAThe Netherlands

Tel: + 31 (0)76 5486 486 Email: [email protected] Fax: + 31 (0)76 5486 400 Internet: http://www.skalar.com

THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS AND ACCESSORIES BOOKLET

------- 27-------------- 29

Page 3: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

TABLE OF CONTENTS

Section 1: Samplers and accessories 1.1 Samplers --------------------------------------------------- 4 1.2 Sample and standards containers --------------------------- 4 1.3 Sample and standards racks -------------------------- 6 1.4 Sample needles, wash vessels & accessories ------------- 7 1.5 Motors and accessories -------------------------------- 9 1.6 General sampler accessories --------------------------------- 10

Section 2: Chemistry units and standard components 2.1 Chemistry units ------------------------------------------- 12 2.2 Accessories for chemistry units ------------------------------ 12 2.3 Pump and accessories --------------------------------- 14 2.4 Chemicals and reagents --------------------------------------- 15

Section 3: Chemistry module components 3.1 Standard module components ------------------------ 16 3.2 Clamps -------------------------------------------------------------- 16 3.3 Manifolds --------------------------------------------------- 17 3.4 Glass coils --------------------------------------------------------- 21 3.5 Heat exchangers and accessories ------------------- 21 3.6 Reactors and accessories ------------------------------------- 23 3.7 Dialyzers and accessories ----------------------------- 24 3.8 Miscellaneous module components ------------------------- 25

Section 4: Tubing, needles and nipples 4.1 Pump tubing tygon 3 color bridges ------------------ 27 4.2 Pump tubing silicon 3 color bridges ------------------------- 27 4.3 Pump tubing solvent flex 3 color bridges ---------- 27 4.4 Pump tubing acid flex 3 color bridges ---------------------- 27 4.5 Pump tubing tygon 2 color bridges ------------------ 28 4.6 Pump tubing silicon 2 color bridges ------------------------- 28 4.7 Pump tubing solvent flex 2 color bridges ---------- 28 4.8 Pump tubing acid flex 2 color bridges ---------------------- 28 4.9 Tubing ------------------------------------------------------- 29 4.10 Sleeves ------------------------------------------------------------- 29 4.11 Needles, nipples and tubing connector ------------ 30

Section 5: Photometers, detectors and meters 5.1 Photometers ----------------------------------------------- 31 5.2 Accessories for photometers ---------------------------------- 33 5.3 UV photometer and accessories --------------------- 34 5.4 Ion selective electrode and accessories ------------------- 35 5.5 Other detectors and meters plus accessories ------ 36 5.6 Flow cells ---------------------------------------------------------- 37 5.7 Filters -------------------------------------------------------- 37

Section 6: Data handling 6.1 Software ---------------------------------------------------- 38 6.2 Analogue interface ----------------------------------------------- 38 6.3 Digital interface ------------------------------------------- 38

Section 7: Supplements and accessories 7.1 Rinsing valves and accessories ---------------------- 40 7.2 Distillation unit and accessories ------------------------------ 41 7.3 Digester unit and accessories ------------------------ 42 7.4 Block digester and accessories ------------------------------ 43 7.5 Othere supplements ------------------------------------- 45

Numerical appendix --------------------------------------------------------- 47

Page No. + Button

Page 4: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Section 1: Samplers and accessories1.1 Samplers

4

SA 1100 Sampler digital, 50 or 100 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz SA 1150 Sampler digital, 4th digit timing 50 or 100 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz

SA 1100/1150 SA 1050/1053

SA 1050 Sampler random access 140 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz

SA 1053 Sampler random access, dual needle, 2 x 70 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz

SA 1074

SA 1074 Sampler random access 300 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz

Sample cups 2.0 ml Polystyrene 1000 pcs.

SA 1020

Sample cups 1.5 ml Polystyrene 1000 pcs.

SA 1021

Sample cups 3.5 mlPolystyrene 1000 pcs.

SA 1022

Sample cups 8.5 ml Polystyrene 1000 pcs.

SA 1023

1.2 Sample and standards containers

SA 1075

SA 1075 Sampler random access 540 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz

Page 5: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

5

1.2 Sample and standards containers, continued

Sample cups 3.5 mlPolypropylene 1000 pcs.

SA 1025

Standards container 35 mlwith cap for SA 1050/ 1053/1074 sampler 40 pcs.

21074341

Sample caps for SA1020/21/22/25/27/30/32 1000 pcs.

SA 1038

Sample cups 3.5 ml Polystyrene green 1000 pcs.

SA 1032

Sample cups 8.5 ml Polypropylene 1000 pcs.

SA 1026

Container glass 30 ml for standards, SA 1050/1053/1074 samplers 12 pcs.

90035097

Sample tubes 10 ml polystyrene 1000 pcs.

SA 1033

Sample cups 3.5 ml Polyethylene 1000 pcs.

SA 1027

Sample tubes 30 ml and screw caps 1000 pcs.

SA 1034

Sample cups 3.5 ml Polystyrene red 1000 pcs.

SA 1030

Sample tubes 10 ml glass 300 pcs.

SA 1036

Container rack complete with 35 ml containers for SA 1050/ 1053 sampler

21050340

Container for standards SA 1070

90035100

Sample cup glass 5 ml

SA 1037

Page 6: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

6

Rack for standards containers for SA 1070

21070029

Holder and 40 standard containers of 35 ml for SA 1074

21074340

Rack 60 sample positions for SA 1070 5 pcs.

21070330

Sample needle extension set for SA 1070

21070345

Rack 24 samples positions for SA 1070 5 pcs.

21070337

Sample rack 60 positions, for sampler for SA 1074

21074350

Rack for 30 standards containers, complete for SA 1070

21070339

Exchange set to use other sample racks for SA 1074

21074360

1.3 Sample and standards racks

Sample rack 28 sample positions for SA 1050

21050090

Sample rack 35 positions for SA 1050

21050350

Sample rack, StSt., 2 x 35 positions for SA 1053

21050351-B

Sample rack 35 positions for use with SA 1034 cups on SA 1050

21050352

Cup plate 80 sample and 10 standards positions for SA 1100/1150

21100315

Cup plate 100 sample and standards positions for SA 1100/1150

21100316

Standards insert for cup plate 21100315

21100048

Dust cover for cup plate SA 1000

21000312

Cup plate for SA 1000

21000315

Risers for 21074350 sample rack 20 pcs.

21074326

Rack for 26 standards containers, complete for SA 1075

21075340

Sample rack 60 positions, for sampler for SA 1075

21075350

Page 7: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

7

Holder for rinsing vessel for SA 1000

21000009

Rinsing vessel PTFE for SA 1000

21000052

Mounting screw needle holder for SA 1000/50/70/74

21000074

Sample needle and anti cup lift for SA 1000

SA 1015

Sample needle Pt/Ir for SA 1006/50/70/74

SA 1016

Sample needle for SA 1006/50/70/74

SA 1018

Sample needle holder for SA 1000

21000038

Sample needle for SA 1100/1150

SA 1017

Sample needle standard for SA 1000/1100

SA 1011

Sample needle small for SA 1000/1100

SA 1012

Sample needle Pt/Ir for SA 1000/1100

SA 1013

Sample needle for SA 1006/1070

SA 1014

1.4 Sample needles, wash vessels and accessories

Dust cover for cup plate SA 1100/1150

21100340B

1.3 Sample and standards racks, continued

Page 8: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

8

Sample needle holder for SA 1070

21070341

1.4 Sample needles, wash vessels and accessories, continued

Needle guide on SA 1074 for one needle

21074013

Needle holder for 1 needle for SA 1074

21074018

Needle guide for one needle for SA 1074

21074108

Purge needle for mixing device

21050122

Needle holder for SA 1050

21050028

Rinsing vessel glass for SA 1050/1070/74/75

21070176

Rinsing vessel holder for SA 1050/53

21050033

Rinsing vessel glass for 2/3 needles for SA 1070

21070221

Sample needle for SA 1053 sampler (2 required for one sampler)

21050104

Rinsing vessel for two needles on SA 1053

21050105

Rinsing vessel for SA 1000

21000306

Sample needle for SA 1075 sampler

21075001

Purge needle for mixing device SA 1075 sampler

21075002

Page 9: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Motor for R movement SA 1050/53

90020864

Motor for rinsing pump SA 1070 Sample arm SA 1000 and SA 1100/50

90020808

Rinsing pump with motor 20 rpm for SA 1050/53/74

21050902

Motor for Y movement SA 1050/53/70 and Y/Z movement SA 1074

90020865

Motor for sample tray rotation SA 1000

90020809

Rinsing pump for SA 1070

21070325

Valve block for diluter.SA 1050 up to serial No. 03670. SA 1074 up to serial No. 03179

90039270

Motor for rinsing pump SA 1050/53

90020810

Motor for rinsing pump SA 1050/53, 20 rpm

90020806

Motor for Z movement SA 1050/53 and X movement SA 1074

90020862

Motor for rinsing pump SA 1000 and SA 1100/50

90020807

1.5 Motors and accessories

Pump head for rinsing pump for SA 1000/1003/1006SA 1100/1150

SA 1065

Pulley Z cable for SA 1050/53

21050030

Z Cable for SA 1050/53

21050031

Spring for Z cable for SA 1050/53

21050061

Valve block for diluter. SA 1050 from serial No. 03671. SA 1074 from serial No. 03180

90039272

9

Page 10: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

10

Mixing device for samples for SA 1050/74 110/120 V, 60 Hz

21050952

Needle guide for SA 1050

21050070

Plunger complete for Z-cable SA 1050/53

21050027

Tubing for diluter with screw and seal 2 pcs.

SA 1091

Spring, tube guiding for SA 1070

21070207

Auto diluter station for SA 1050Eprom V. 5.2 and lower

21050811

Tubing holder for SA 1050/53

21050034

Tubing clamp wash pump for SA 1000

21000005

Upgrade set for SA 1070 with use of FlowAccess® software

21070451

Auto diluter station for SA 1050Eprom V. 5.3 and higher

21050914

Cover Plate Valves for SA 1050/53

21050039

Mixing device for samples for SA 1050/74 220/240 V, 50 Hz

21050951

Cover Plate Diluter for SA 1050/53

21050043

1.6 General sampler accessories

Filette sample filter system 1000 pcs.

SA 1024

Pump tubing, rinsing pump for SA 1000/03/06SA 1050/74 / SA 1100/50 8 pcs.

SA 1060

Pump tubing rinsing pump for SA 1070 8 pcs.

SA 1061

Sample valve set for extension 40 to 80 samples for SA 1000

SA 1080

Mixing device for samples for SA 1053, 220/240 V, 50 Hz or 110/120 V, 60 Hz

21053951

Upgrade set for use of two (2) needles forSA 1074. Serial No. 03177 and lower

21074321

Needle guide, Hastelloy, for SA 1050

21050072

Page 11: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Upgrade set for use of two (2) needles on SA 1074. Serial No. 03178 and higher

21074324

1.6 General sampler accessories, continued

11

Auto diluter station for SA 1074Serial No. 3177 and lower

21074914

Upgrade set for use of four (4) needles on SA 1074. Serial No. 3178 and higher

21074325

Auto diluter station for SA 1074Serial No. 3178 and higher

21074811

Cable RS232 for connecting SA 1090 to SA 1070

21090851

Flush vessel for sampler SA 1074/1050(Note; remove plastic top, not required)

25120051

Cable RS 232, connecting sampler SA 1050/52/53/70 to computer 5 m

90015029

Cable RS 232, connecting sampler SA 1074 to computer 3 m

90015028

Valve electrical 2 way for SA 1050/53/74

90015518

Mixing device for samples for 1074 230V, 50Hz.

21074933

Mixing device for samples for 1074 110V, 50Hz.

21074934

Syringe 25 ml for diluter station

90039208

Syringe 10 ml for diluter station

90039206

O-ring for flush vessel in diluter stations 21050811 / 2105091421074811 / 21074914

90039524

Valve electric with DIN connector for SA 1100/1150

21100320

Upgrade kit to 80 or 100 samples, valve and needle for SA 1100/1150

21100325

Syringe salt line 10 ml for diluter station

90039209

Plunger for 90039209 syringe

90039210

Upgrade set for use of four (4) needles on SA 1074. Serial No. 03177 and lower

21074322

Page 12: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Section 2: Chemistry units and standard components2.1 Chemistry units

12

SA 3000 3 modules 16 channels with one pump deckSA 5000 5 modules 16 channels with two pump decks

DiscontinuedSA 2000 2 modules 16 channels with one pump deckSA 4000 4 modules 16 channels with two pump decks

2.2 Accessories for chemistry units

Grease for pump decks 50 ml

SA 2010

Glass bottle, brown 1 liter

SA 5386

Plastic reagent bottle 1 liter

SA 5382

Pinners for cleaning StSt needles, 2 sizes included 2 pcs.

SA 5219

Plastic reagent bottle 2 liter

SA 5387

Plastic reagent / waste container 5 liter

SA 5383

Sinker, glass 10 pcs.

SA 5380

Plastic waste container 25 liter

SA 5389

Plastic reagent / waste container 10 liter

SA 5384

Reagent filter, in-line 10 pcs.

SA 5381

Lubricant, bottle 25 ml

SA 5418

Plastic waste container 20 liter

SA 5385

Glue for Tygon, bottle 25 ml

SA 5419

Plastic bottle, brown 500 ml

90035109

Plastic bottle, brown 1 liter

90035110

Plastic bottle 0.5 liter

SA 5388

Page 13: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

2.2 Accessories for chemistry units, continued

Tool kit for continuous flow analyzer

SA 5703

13

Base mounting plate for re-sampler

25120112

Wash bottle, glass

SA 5781

Dustcover forSA 2000/4000

25120114

Accessories, analyzer start-up kit, customized for your applications

SA KIT

Mounting plate “Z” shape for

25120124

Waste receptacle for 6 waste tube

Heating control board (heater 1 and 2) forSA 3000/5000

25121704

25120051

Cooling fan for SA 3000/5000

90028010

Push button speed selection forSA 3000/5000

90024107

Temperature controller for SA 3000/5000

90028120

Dustcover forSA 3000/5000

25121037

Power supply board forSA 3000/5000

90028118

Power cord, USA plug 110V / 60Hz

90015009

Cooling fan for SA 2000/4000

90028006

Socket bench 10 positions 230 V, for Euro power plugs

90012391

Power cord for 230 V, Euro power plug

90015001

“T” connector plastic for waste vessel

90039101

Pump for the accommodation of four additional pumptubes

25121315

Heating control board (heater 3 and 4) forSA 3000/5000

25121705

Page 14: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

14

Springs for pump deck 22300319 6 pcs.

22300317

Handle for pump deck 22300319

22300010

Pump deck for pump

22300319

Cogwheel pump side

22300012

Needle block for 22300331

22300320

Cogwheel motor side forSA 2000/4000

22300045

Bubble injector

22300331

Roller Cage

22300312

2.3 Pump and accessories

22100901 Pump, 2 x 16 channels for SA 4000 220/240 V, 50 Hz22100902 Pump, 2 x 16 channels for SA 4000 110 V, 60 Hz 22102901 Pump, 1 x 16 channels for SA 2000 220/240 V, 50 Hz22102902 Pump, 1 x 16 channels for SA 2000 110 V, 60 Hz 22300354 Pump, 2 x 16 channels for SA 5000 24 Volt DC 22300355 Pump, 1 x 16 channels for SA 3000 24 Volt DC

16 channels16 channels

Cogwheel motor side forSA 3000/5000

22300071

2.2 Accessories for chemistry units, continued

Tube connector forpressure regulator

90040337

Pressure regulator

90040336

Capicitor for pump motorSA 2000/4000, 220 V

90006016

Capicitor for pump motorSA 2000/4000, 110 V

90006020

“L” connector plastic for waste vessel

90039102

Motor for SA 2000/4000 220/240 V, 50 Hz

25120320

Page 15: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

15

2.4 Chemicals and reagents

SC 13900 Brij 35, 30% solution 250 ml SC 13903 MSD (Iron determination) 20% solution 50 ml SC 13904 TW20, 50% solution 50 ml SC 13905 SOD20E (Sulfur Dioxide application) 250 ml SC 13906 Lerolat, 20% solution 50 ml SC 13907 Triton X-100, 10% solution 50 ml SC 13908 FFD 6 250 ml SC 13909 FFD 6 1000 ml SC 13910 Lauryl Sulfate Sodium salt 25 g SC 13911 Antifoam, 10% suspension 50 ml SC 13913 Activated Cadmium 10 g SC 13914 Sigmacote, for coating of phase separator 25 ml SC 13915 Hostapur 50 ml SC 13916 OCD-8, cleaning detergent 250 ml25600351 Boiling granules 250 g

2.3 Pump and accessories, continued

Motor for SA 3000/5000 24 Volt DC

90020881

Tube connector for needle block 22300320

90040307

Motor for SA 2000/4000 110/120 V, 60 Hz

90020768

Motor for SA 2000/4000 110/120 V, 50 Hz

90020772

Pump for air injection

90040014

Page 16: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Section 3: Chemistry module components3.1 Standard module components

16

Module mounting plate solvent resistant,38 x 10.5 cm

SA 5102

Mounting clamp for SA 5357

25300030

Mounting clamp for coils large

SA 5110

Manifold holder including rod and screws

25200105

Module mounting plate standard, 38 x 10.5 cm

SA 5107

Mounting clamp for coils small

SA 5111

Module mounting plate with dialyzer hole,38 x 10.5 cm

SA 5108

Mounting clamp for coil SA 5307

SA 5113

End block for SA 5102/07/08

SA 5109

Mounting clamp for coilsSA 5327/5365/5557

SA 5114

3.2 Clamps

Metal clamp 6 mm

90035652

Module mounting plate standard, 38 x 8.4 cm

SA 5115

Module mounting plate solvent resistant, 38 x 8.4 cm

SA 5116

Metal clamp 12 mm

90035653

Clamp for pump tubes

90041086

Mounting clamp for waste receptacle 25120051

90037513

Page 17: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

3.3 Manifolds

Discontinued, replaced by SA 3235

SA 3230

17

Gas/liquid separator, glass

SA 5215

Debubbler, glass, T, small volume, inlet ID 1.5 mm outlet ID 2.0 mm

SA 5211

Debubbler glass large volume

SA 5207

Manifold glass, PtIr inlet 1.0 mm

SA 5203

Discontinued, replaced by SA 3236

SA 3231

Debubbler straight very large volume

SA 5212

Adductor glass T-piece 1.5 mm capillary

SA 5208

Manifold glass, H-shape 2.0 mm

SA 5204

Manifold glass T-shape 1.5 mm

SA 5201

Manifold gas/liquid separator

SA 5213

Inlet connector glass 2.0 mm capillary

SA 5209

Inlet connector glass capillary 1.5 mm

SA 5205

Manifold glass T-shape PtIr 1.5 mm

SA 5202

Connector glass, T-shape, 2.0 mm ID

SA 5214

Debubbler glass, H-shape, small volume

SA 5210

Inlet connector glass PtIr 2.0 mm

SA 5206

Manifold 4-way, 3 StSt needle 1.0 mm

SA 3235

Manifold 4-way, 3 StSt needle 1.5 mm

SA 3236

Manifold glass T-shape large bore

SA 5200

Page 18: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

3.3 Manifolds, continued

Manifold “T”, 1 KelF nipple, Perspex 2.0 mm

SA 5221

18

Manifold 2-way 2 StSt needles Perspex 1.0 mm

SA 5246

Manifold 3-way 2 StSt needles Perspex 2.0 mm

SA 5241

Discontinued, replaced by SA 5237

SA 5232

Manifold “T”, 1 KelF nipple, KelF 2.0 mm

SA 5222

Manifold 3-way 2 KelF nipple KelF 2.0 mm

SA 5242

Discontinued, replaced by SA 5238

SA 5233

Discontinued, replaced by SA 5235

SA 5230

Manifold 4-way 3 StSt needles Perspex 2.0 mm micro bore needle

SA 5244

Manifold 4-way 1 PtIr needle 2 KelF nipple KelF 2.0 mm

SA 5234

Manifold 4-way 3 StSt needles Perspex 2.0 mm

SA 5245

Manifold 3-way 2 StSt needles Perspex 1.5 mm

SA 5240

Debubbler glass, medium volume

SA 5217

Manifold “T”, 1 StSt needle, Perspex 2.0 mm

SA 5220

Manifold 4-way 3 StSt needle, Perspex 1.5 mm

SA 5235

Manifold 4-way 1 PtIr needle 2 KelF nipple Perspex 2.0 mm

SA 5237

Manifold 4-way 1 PtIr needle 2 KelF nipple Perspex 1.5 mm

SA 5238

Sample splitter 3-way Perspex, KelF nipples

SA 5223

Sample splitter 3-way Perspex, KelF nipples large bore

SA 5224

Manifold 4-way, 2 PtIr needles glass 2.0 mm

SA 5216

Page 19: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

3.3 Manifolds, continued

19

Manifold “T” StSt needle

SA 9220

Manifold “T” Kelf nipple

SA 9221

Resampler 3-way 1 StSt needle Perspex

SA 5255

Manifold “T” Kelf

SA 9222

Resampler 3-way 1 KelF nipple KelF

SA 5256

Manifold 3-way 2 StSt needle

SA 9240

Resampler 3-way 1 StSt needle Perspex

SA 5250

Resampler 3-way 1 KelF nipple KelF

SA 5251

Sample splitter 3-way 3 StSt needles Perspex

SA 5260

Sample splitter 4-way 4 StSt needles Perspex

SA 5261

Sample splitter 5 way 5 StSt needles Perspex

SA 5262

Sample splitter 3-way 3 PtIr needles KelF

SA 5263

Fastener Perspex small 10 pcs.

SA 5421

Manifold 3-way 3 StSt needles Perspex

SA 5249

Decanting coil glass OD 4.0 - ID 2.0 mm

SA 5349

Manifold 2-way 2 KelF nipples KelF 1.0 mm

SA 5247

Manifold 4-way 4 StSt needles Perspex 0.8 mm

SA 5248

Page 20: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

3.3 Manifolds, continued

Manifold 3-way 2 StSt needle

SA 9241

Manifold 3-way nipple 2.0 mm

SA 9242

Manifold inlet connector 1.5mm

SA 9244

Manifold inlet connector 2.0 mm

SA 9245

20

Page 21: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

21

3.4 Glass coils

SA 3310 Coil glass 50 turns micro bore SA 3312 Coil glass 30 turns micro bore SA 3313 Coil glass 20 turns micro bore SA 3314 Coil glass 10 turns micro bore SA 3315 Coil glass 5 turns micro bore SA 3317 Coil glass 50 turns micro bore large

SA 5320 Coil glass 50 turns OD x ID 4.0 x 1.5 mm SA 5321 Coil glass 40 turns OD x ID 4.0 x 1.5 mm SA 5322 Coil glass 30 turns OD x ID 4.0 x 1.5 mm SA 5323 Coil glass 20 turns OD x ID 4.0 x 1.5 mm SA 5324 Coil glass 10 turns OD x ID 4.0 x 1.5 mm SA 5325 Coil glass 5 turns OD x ID 4.0 x 1.5 mm SA 5326 Coil glass 5 turns OD x ID 4.0 x 2.0 mm SA 5327 Coil glass 50 turns OD x ID 4.0 x 1.5 mm , 50 mm Diameter SA 5328 Coil glass 10 turns OD x ID 4.0 x 2.0 mm SA 5329 Coil glass 20 turns OD x ID 4.0 x 2.0 mm

3.5 Heat exchanger and accessories

SA 5300 Coil with heat-exchanger 50 turns SA 5300-B Coil with heat-exchanger 50 turns, light protectedSA 5301 Coil with heat-exchanger 40 turnsSA 5301-B Coil with heat-exchanger 40 turns, light protected SA 5302 Coil with heat-exchanger 30 turns SA 5302-B Coil with heat-exchanger 30 turns, light protected SA 5303 Coil with heat-exchanger 20 turns SA 5303-B Coil with heat-exchanger 20 turns, light protectedSA 5304 Coil with heat-exchanger 10 turns SA 5304-B Coil with heat-exchanger 10 turns, light protected SA 5305 Coil with heat-exchanger 5 turns SA 5305-B Coil with heat-exchanger 5 turns, light protectedSA 5307 Coil with heat-exchanger 50 turns, 50 mm diameterSA 5308 Coil with heat exchanger 50 turns, 120 mm

SA 5310 Coil glass 50 turns for SA 5300 SA 5311 Coil glass 40 turns for SA 5301 SA 5312 Coil glass 30 turns for SA 5302 SA 5313 Coil glass 20 turns for SA 5303 SA 5314 Coil glass 10 turns for SA 5304 SA 5315 Coil glass 5 turns for SA 5305 SA 5317 Coil glass 50 turns for SA 5307 SA 5318 Coil glass 50 turns for SA 5308

SA 5330 Heat-exchanger for SA 5305/5304 SA 5331 Heat-exchanger for SA 5303/5302 SA 5332 Heat-exchanger for SA 5301/5300 SA 5334 Heat-exchanger for SA 5308 SA 5335 Heat-exchanger for SA 5307

SA 5344 Teflon coil 1.5 m with heat exchanger, completeSA 5346 Teflon coil 5 m with heat exchanger, complete

Page 22: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

3.5 Heat exchanger and accessories, continued

22

“O”-ring for heatexchanger cap 25300021

90039526

Screw, nylon for heat-exchanger 10 pcs.

SA 5339

Tube connector for heat exchanger SA 5300/1/2/3/4/5 5 pcs.

SA 5333

“O”-ring for heat exchanger cap 25300041

90039581

Fastener nylon large 5 pcs.

SA 5423

“O” ring for heat exchanger cap 25300005 10 pcs.

SA 5336

Cap for SA 5300/1/2/3/4/5without “O” ring

25300005

“O” ring for SA 5339 10 pcs.

SA 5337

Cap for SA 5307 without “O” ring

25300021

“O” ring for fastener SA 5423 10 pcs.

SA 5338

Cap for SA 5308 without “O” ring

25300041

Tube connector for heat exchanger SA 5308

25300042

Page 23: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

3.6 Reactor and accessories

23

“O” rings and oil forSA 5521/22/23/24

SA 5527

Insolation set for all reactors except the smaller SA 5531

25500030

Heating element for reactor 110 V, 60 Hz

25500031

Heating element for reactor 230 V, 50 Hz

25500032

SA 3521 Reactor including glass coil 25500145 micro bore, 220/240 V, 50 Hz or 110/120 V, 60 Hz SA 5521 Reactor including glass coil 25500045, 220/240 V, 50 Hz or 110/120 V, 60 Hz SA 5522 Reactor including glass coil 25500046, 220/240 V, 50 Hz or 110/120 V, 60 HzSA 5523 Reactor including glass coil 25500047, 220/240 V, 50 Hz or 110/120 V, 60 HzSA 5524 Reactor including glass coil 25500048, 220/240 V, 50 Hz or 110/120 V, 60 Hz

SA 5531 Reactor including glass coil 25500161, 220/240 V, 50 Hz or 110/120 V, 60 Hz

25500911 Reactor including StSt coil 25500060 230 V, 50 Hz25500913 Reactor including StSt coil 25500060 110 V, 60 Hz25500915 Reactor including StSt coil 25500061 230 V, 50 Hz25500916 Reactor including StSt coil 25500061 110 V, 60 Hz25500921 Reactor including StSt coil 25500063 230 V, 50 Hz25500922 Reactor including StSt coil 25500063 110 V, 60 Hz25500933 Reactor including StSt coil 25500062 230 V, 50 Hz25500934 Reactor including StSt coil 25500062 110 V, 60 Hz25500946 Reactor including PTFE coil 32 turns 230 V, 50 Hz 25500947 Reactor including PTFE coil 32 turns 110 V, 60 Hz

25500045 Coil glass 35 turns for SA 5521 25500046 Coil glass 15 turns for SA 5522 25500047 Coil glass double for SA 5523 25500048 Coil glass 5 turns for SA 552425500145 Coil glass 35 turns for SA 3521 micro bore25500161 Coil glass double for SA 5531

25500060 Coil StSt 64 turns for 25500911 25500061 Coil StSt 5 turns for 25500915 25500062 Coil StSt 32 turns for 25500933 25500063 Coil StSt 15 turns 3 mm ID for 25500921

25540900 Controller reactor including temperature display 230 V, 50 Hz. 25540901 Controller reactor including temperature display 110 V, 60 Hz. 25540902 Controller reactor including temperature display 240 V, 50 Hz.

Page 24: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

3.6 Reactor and accessories, continued

24

Pt 100 element for reactor

25500033

Thermal Fuse 165°C for SA 5521/22/22/23/24

90008622

3.7 Dialyzers and accessories

SA 3271 Dialyzer 75 mm Micro bore SA 3272 Dialyzer 150 mm Micro bore SA 3274 Dialyzer 300 mm Micro bore SA 3275 Dialyzer 800 mm Micro bore

SA 5271 Dialyzer 70 mm SA 5272 Dialyzer 150 mm SA 5273 Dialyzer 35 mm SA 5274 Dialyzer 300 mm SA 5275 Dialyzer 700 mm SA 5276 Dialyzer 700 mm, 2 mm bore

25201902 Dialyzer, PTFE, 150 mm. 25201903 Dialyzer, PTFE, 35 mm. 25201904 Dialyzer, PTFE, 300 mm. 25201905 Dialyzer, PTFE, 700 mm.

SA 5280 Membrane PTFE 150 mm (Conductivity) 4 pcs. SA 5282 Membranes pre-mount, small 12 pcs. SA 5283 Membranes pre-mount, large 12 pcs.SA 5284 Membrane CO2 for gas dialysis 1 pcs.

25201300 Membranes PTFE, pre-mount for SA 5271 12 pcs. 25201301 Membranes PTFE, pre-mount for SA 5272 12 pcs. 25201302 Membranes PTFE, pre-mount for SA 5274/5275 12 pcs. 25201303 Membranes Pergamin, pre-mount for SA 5271 12 pcs. 25201304 Membranes Pergamin, pre-mount for SA 5272 12 pcs. 25201305 Membranes PTFE, for gas dialysis, pre-mount for SA 5271 12 pcs.25201306 Membranes PTFE, for gas dialysis, pre-mount for SA 5272 12 pcs.25201307 Membranes PTFE, for gas dialysis, pre-mount for SA 5274/5275 12 pcs.

Fastener Perspex small (old model) 10 pcs.

SA 5421

Thermal switch 165°C for SA 5521/22/23/24

90008624

Extension cable reactor 120 cm

25500814

Page 25: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

3.8 Miscellaneous module components

Valve manual switching 4-way for Cd column or pre-dilution

SA 5290

25

Cadmium column glass, unfilled

SA 5373

Column glass “U”, unfilled

SA 5357

Tubing for SA 5290 10 pcs.

SA 5291

Cadmium column glass, filled with activated Cadmium

SA 5374

Column glass ”U”, filled with activated Cadmium

SA 5358

Fitting and ring for SA 5290 5 pcs.

SA 5292

Fastener Perspex small 10 pcs.

SA 5421

Tube glass, OD x ID 4.0 x 2.0 mm 1.5 m

SA 5359

Column glass, phosphate separation without resin

SA 5355

Tube glass, ODxID 4.0 x 1.5 mm 1.5 m

SA 5360

Tubing conector for SA 5373/5374 2 pcs.

SA 5424

Antidote collecting tube glass

SA 5708

Back pressure regulator

SA 5530

Safety air scrubber glass

SA 5709

Glass bottle for potassium cyanide reagent for nicotine in tobacco

SA 5705

Waste bottle for collecting antidote dilutions for nicotine in tobacco

SA 5706

Overflow bottle nicotine

SA 5707

Valve automatic switching reagent/Cd column

SA 5293

Pressure/liquid separator, 3 way

SA 5218

Page 26: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Mounting plate for Cd column, complete

25120312

Mounting clamp for SA 5357

25300030

Note: All Chemicals and reagents see page 14

SC 13913 Activated Cadmium 10 g

3.8 Miscellaneous module components continued

Reagent bottle for nicotine in tobacco

SA 5720

Cap with O-ring, 18 mm

90037853

Waste bottle for nicotine in tobacco, complete set

SA 5725

Cap with O-ring, 25 mm

90037858

Air/liquid separator for TOC

SA 9370

Ball valve 3-way 1⁄4” PP

90015536

Safety vessel glass

2CA10095

Male connector 1⁄4” PP for ball valve 90015536(3 required)

90037819

Glass tube for bottle SA 5720

SA 5711

26

Cap with O-ring, 32 mm

90037859

Glass tube for bottle SA 5707

SA 5710

Page 27: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

27

SA 3021 orange/red 0.03 ml/minSA 3022 orange/blue 0.05 ml/minSA 3023 red/blue 0.06 ml/minSA 3024 orange/green 0.10 ml/minSA 3025 orange/yellow 0.16 ml/minSA 3026 orange/white 0.23 ml/minSA 3027 black 0.32 ml/minSA 3028 orange 0.42 ml/minSA 3029 white 0.60 ml/minSA 3030 red 0.80 ml/min

SA 3031 grey 1.00 ml/minSA 3032 yellow 1.20 ml/minSA 3033 yellow/blue 1.40 ml/minSA 3034 blue 1.60 ml/minSA 3035 green 2.00 ml/minSA 3036 purple 2.50 ml/minSA 3037 purple/black 2.90 ml/minSA 3038 purple/orange 3.40 ml/minSA 3039 purple/white 3.90 ml/min

Transparent

SA 3041 orange/white 0.23 ml/min SA 3042 black 0.32 ml/minSA 3043 orange 0.42 ml/minSA 3044 white 0.60 ml/minSA 3045 red 0.80 ml/minSA 3046 grey 1.00 ml/minSA 3047 yellow 1.20 ml/min

SA 3048 yellow/blue 1.40 ml/minSA 3049 blue 1.60 ml/minSA 3050 green 2.00 ml/minSA 3051 purple 2.50 ml/minSA 3052 purple/black 2.90 ml/minSA 3053 purple/orange 3.40 ml/minSA 3054 purple/white 3.90 ml/min

4.2 Pump tubing SILICON 3 color bridges, set 6 pcs.

Opaque

SA 3063 orange/white 0.23 ml/minSA 3064 black 0.32 ml/minSA 3065 orange 0.42 ml/minSA 3066 white 0.60 ml/min SA 3067 red 0.80 ml/minSA 3068 grey 1.00 ml/min

SA 3069 yellow 1.20 ml/minSA 3070 yellow/blue 1.40 ml/minSA 3071 blue 1.60 ml/minSA 3072 green 2.00 ml/minSA 3073 purple 2.50 ml/min

4.3 Pump tubing SOLVENT FLEX 3 color bridges, set 12 pcs.

Yellow

SA 3080 orange/yellow 0.16 ml/minSA 3081 orange/white 0.20 ml/minSA 3082 black 0.30 ml/minSA 3083 orange 0.43 ml/minSA 3084 white 0.53 ml/minSA 3085 red 0.64 ml/minSA 3086 grey 0.77 ml/minSA 3087 yellow 0.92 ml/min

SA 3088 yellow/blue 1.10 ml/minSA 3089 blue 1.20 ml/minSA 3090 green 1.40 ml/minSA 3091 purple 1.80 ml/minSA 3092 purple/black 2.10 ml/minSA 3093 purple/orange 2.40 ml/minSA 3094 purple/white 2.80 ml/min

4.4 Pump tubing ACID FLEX 3 color bridges, 1 pcs.

Black

Section 4: Tubing, sleeves, needles and nipples

Special SA 3002 Pump tubing Santoprene 3 color bridges, black 0.32 ml/min, set 12 pcs.

4.1 Pump tubing TYGON 3 color bridges, set 12 pcs.

Page 28: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

28

SA 5020 orange/black 0.015 ml/minSA 5021 orange/red 0.03 ml/minSA 5022 orange/blue 0.05 ml/minSA 5023 red/blue 0.06 ml/min SA 5024 orange/green 0.10 ml/minSA 5025 orange/yellow 0.16 ml/minSA 5026 orange/white 0.23 ml/minSA 5027 black 0.32 ml/min SA 5028 orange 0.42 ml/minSA 5029 white 0.60 ml/min

SA 5030 red 0.80 ml/minSA 5031 grey 1.00 ml/minSA 5032 yellow 1.20 ml/minSA 5033 yellow/blue 1.40 ml/minSA 5034 blue 1.60 ml/minSA 5035 green 2.00 ml/minSA 5036 purple 2.50 ml/minSA 5037 purple/black 2.90 ml/minSA 5038 purple/orange 3.40 ml/minSA 5039 purple/white 3.90 ml/min

Transparent

SA 5040 translucent 1.30 ml/minSA 5041 orange/white 0.23 ml/minSA 5042 black 0.32 ml/minSA 5043 orange 0.42 ml/minSA 5044 white 0.60 ml/minSA 5045 red 0.80 ml/minSA 5046 grey 1.00 ml/minSA 5047 yellow 1.20 ml/min

SA 5048 yellow/blue 1.40 ml/minSA 5049 blue 1.60 ml/minSA 5050 green 2.00 ml/minSA 5051 purple 2.50 ml/minSA 5052 purple/black 2.90 ml/minSA 5053 purple/orange 3.40 ml/minSA 5054 purple/white 3.90 ml/min

4.6 Pump tubing SILICON 2 color bridges, set 6 pcs.

Opaque

SA 5060 orange/blue 0.05 ml/minSA 5061 orange/green 0.10 ml/minSA 5062 orange/yellow 0.16 ml/minSA 5063 orange/white 0.23 ml/minSA 5064 black 0.32 ml/minSA 5065 orange 0.42 ml/minSA 5066 white 0.60 ml/minSA 5067 red 0.80 ml/minSA 5068 grey 1.00 ml/min

SA 5069 yellow 1.20 ml/minSA 5070 yellow/blue 1.40 ml/minSA 5071 blue 1.60 ml/minSA 5072 green 2.00 ml/minSA 5073 purple 2.50 ml/minSA 5074 purple/black 2.90 ml/minSA 5075 purple/orange 3.40 ml/minSA 5076 purple/white 3.90 ml/min

4.7 Pump tubing SOLVENT FLEX 2 color bridges, set 12 pcs.

Yellow

SA 5080 orange/yellow 0.16 ml/minSA 5081 orange/white 0.20 ml/minSA 5082 black 0.30 ml/minSA 5083 orange 0.43 ml/minSA 5084 white 0.53 ml/minSA 5085 red 0.64 ml/minSA 5086 grey 0.77 ml/minSA 5087 yellow 0.92 ml/min

SA 5088 yellow/blue 1.10 ml/minSA 5089 blue 1.20 ml/minSA 5090 green 1.40 ml/minSA 5091 purple 1.80 ml/minSA 5092 purple/black 2.10 ml/minSA 5093 purple/orange 2.40 ml/minSA 5094 purple/white 2.80 ml/min

4.8 Pump tubing ACID FLEX 2 color bridges, each

Black

SA 1060 Pump tubing Tygon 2 color bridges, orange/black, set 8 pcs. (see also page 9)SA 1061 Pump tubing Tygon 2 color bridges, red, set 8 pcs. (see also page 9)

4.5 Pump tubing TYGON 2 color bridges, set 12 pcs.

Page 29: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

4.9 Tubing

29

SA 3142 Tubing Polyethylene 0.5 mm ID 5 m SA 3150 Tubing Silicon 0.5 mm ID 3 m

SA 5130 Tubing Tygon 0.8 mm ID 15 m SA 5131 Tubing Tygon 1.6 mm ID 15 m SA 5132 Tubing Tygon 2.4 mm ID 15 m SA 5133 Tubing Tygon 3.2 mm ID 15 m

SA 5140 Tubing Polyethylene 0.7 mm ID 15 m SA 5141 Tubing Polyethylene 1.0 mm ID 15 m SA 5142 Tubing Polyethylene 1.5 mm ID 15 m SA 5143 Tubing Polyethylene 4 x 1 mm Od x ID 15 m SA 5144 Tubing Polyethylene 1.0 mm ID 0.2 m

SA 5150 Tubing Silicone 1.0 mm ID 15 m SA 5154 Tubing for waste organic solvents 3 m SA 5155 Tubing PVC 6.0 mm ID 15 m SA 5156 Tubing PVC 25 mm ID 1.5 mSA 5160 Tubing PTFE 0.7 mm ID 15 m SA 5170 Tubing PTFE 2.8 x 0.8 mm Od x ID 15 m

SA 5180 Transmission tubing Acidflex 0.51 mm ID 1 mSA 5181 Transmission tubing Acidflex 0.63 mm ID 1 m SA 5182 Transmission tubing Acidflex 0.76 mm ID 1 m SA 5183 Transmission tubing Acidflex 0.89 mm ID 1 m SA 5184 Transmission tubing Acidflex 1.00 mm ID 1 m SA 5185 Transmission tubing Acidflex 1.10 mm ID 1 m SA 5186 Transmission tubing Acidflex 1.30 mm ID 1 m SA 5187 Transmission tubing Acidflex 1.40 mm ID 1 m SA 5188 Transmission tubing Acidflex 1.50 mm ID 1 m SA 5189 Transmission tubing Acidflex 1.70 mm ID 1 m SA 5190 Transmission tubing Acidflex 1.90 mm ID 1 m SA 5191 Transmission tubing Acidflex 2.10 mm ID 1 m SA 5192 Transmission tubing Acidflex 2.30 mm ID 1 m SA 5193 Transmission tubing Acidflex 2.50 mm ID 1 m SA 5194 Transmission tubing Acidflex 2.80 mm ID 1 m

SA 5291 Tubing for 5290 10 pcs.

SA 5359 Tube glass, 4.0 x 2.0 mm OD x ID 1.5 mSA 5360 Tube glass, 4.0 x 1.5 mm OD x ID 1.5 m

90041448 Teflon tubing, 1.6 x 0.8 mm OD x ID 15 m90041469 Pharmed tubing 1 mm ID 1 m

SA 5400 Sleeve, Tygon 3.2 mm ID 50 pcs.

SA 5401 Sleeve, Tygon 2.4 mm ID 50 pcs.

SA 5402 Sleeve, Tygon 1.6 mm ID 50 pcs.

SA 5406 Sleeve, Silicon 2.4 mm ID 50 pcs.

SA 5407 Sleeve insert for phase separator 5 pcs.

SA 5408 Sleeve, Polyethylene 1.5 mm ID 50 pcs.

SA 5409 Sleeve, PVC 6.0 mm ID 50 pcs.

SA 5414 Sleeve, Acidflex 1,9mm. ID 25 pcs. SA 5415 Sleeve, Acidflex 2,5mm. ID 25 pcs.

2CA14321 Sleeve, Acidflex 3.2 mm ID 5 pcs.

4.10 Sleeves

Page 30: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

SA 5431 Needle StSt 0.45 mm ID 5 pcs.

SA 5432 Needle StSt 0.80 mm ID 5 pcs.

SA 5433 Needle StSt 1.00 mm ID 5 pcs.

SA 5434 Needle StSt 1.50 mm ID 5 pcs.

SA 5435 Needle PtIr 0.50 mm ID

SA 5436 Needle PtIr 0.80 mm ID

SA 5454 Nipple polyethylene N5 10 pcs.

SA 5455 Nipple polyethylene N6 10 pcs.

SA 5456 Nipple polyethylene N7 10 pcs.

SA 5457 Nipple polyethylene N8 10 pcs.

SA 5458 Nipple polyethylene N9 10 pcs.

SA 5504 Connector for SA 5155

4.11 Needles, nipples and tubing conector

30

“T” connector plastic for waste vessel

90039101

“L” connector plastic for waste vessel

90039102

Page 31: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Section 5: Photometers, detectors and meters5.1 Photometers

31

* Please note; extension to power supply units with bajonet connectors (at rear) require an additional conversion cable cat. no. 26200809 plus 2 nuts cat. no. 90018510

SA 6200 Photometer dual channel 220/240 V, 50 Hz or 110/120 V, 60 Hz

* SA 6205 Photometer insert, dual channel

* SA 6255 Photometer insert, turbo matrix correction

SA 6250 Photometer matrix correction 220/240 V, 50 Hz or 110/120 V, 60 Hz

Page 32: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

5.1 Photometers, continued

32

* Please note; extension to power supply units with bajonet connectors (at rear) require an additional conversion cable cat. no. 26200809 plus 2 nuts cat. no. 90018510

* SA 6260 Photometer insert, matrix correction

SA 6270 Photometer turbo matrix correction 220/240 V, 50 Hz or 110/120 V, 60 Hz

Page 33: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

5.2 Accessories for photometers

Photometer lamp for SA 6000

26000703

33

Dial for fine potentiometer SA 6000 and SA 6200/50/70

90015605

Photometer head matrix for SA 6250/60

26400910

Photometer head dual channel analogue for SA 6200/05

26200902

PCB for SA 6200/05/50/55/60/70

26200700

Lamp for SA 6200/05/50/55/60/70/6300(replaces 90020003)

90020012

Photometer head turbo matrix for SA 6255/70

26401910

Photometer head dual channel digitalfor 28505902

26200903

Cable, conversion for 3 pin photometer plug to 5 pin

26200809

Indication light power switch

90020011

Cable digital photometer head to interface for 28503902/4/6/8 (old interface) 1.5 meter

28503810

Photometer head turbo matrix digital for 28505911

26401920

Cable, connecting detector head to SA 6300

26300803

Cable, photometer to interface

26200813

Photometer photocell 650-900 nm

90050501

Cable, connecting detector head to analog photometers

90015030

Photometer head matrix digital for 28505901

26400920

Power supply for 2 x SA 6205/55/60

26400900

Photometer photocell 340-650 nm

90050502

Page 34: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Flow cell holder for SA 6701

SA 6752

Flow cell 10 mm quartz for SA 6750, including spacer (SA 6750 UV photometer discontinued)

SA 6701

Filter 275 nm for SA 6850

SA 6801

Inlet and outlet connection tubing with screws for SA 6701

SA 6703

Filter 280 nm for SA 6850

SA 6803

Deuterium lamp for UV detector SA 6700 (SA 6700 UV photometer discontinued)

SA 6711

Deuterium lamp for UV detector SA 6850

SA 6811

Deuterium lamp for UV detector SA 6750(SA 6750 UV photometer discontinued)

SA 6712

5.3 UV photometer and accessories

34

UV Photometer220/240 V, 50 Hz or 110/120 V, 60 Hz

SA 6850

Flow cell 30 mm for bubble gating, including spacer

SA 6443

Page 35: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

5.4 Ion selective electrode (ISE) and accessories

Electrode reference outer filling solution for 90103053

SA 6054

35

O-ring for sealing ISE electrode

90039536

Power supply for 26400320

26400321

Electrode reference inner filling solution for 90103053

SA 6055

Electrode ISE Fluoride, 12 mm. OD

90103051

Chamber for 12 mm. Ø ISE and reference electrode

26050003

Electrode ISE Reference, 12 mm. OD

90103053

Flow cell for Chloride electrochemical measurement

26400320

O-ring for sealing ISE, bottom

90039535

Cable for ISE detector 26050903/4 1.2 m

90103061

Interface for pH/ISE 230 V, 50 Hz or 110 V/120 V, 60 Hz

SP 400

Page 36: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Electrode, pH, micro flow through, DIN 19262

SA 5295

Conductivity cell

SA 5267

Conductivity

pH and viscosity

Signal offset compensator for pH and Viscosity

SA 8640

36

IR detector, stand alone unit

SA 6280

IR detector

Fluorimeter

SA 6310

Lamp for SA 6310 fluorimeter

90020006

Fluorimeter 220/240 V, 50 Hz or 110/120 V, 60 Hz

Flow cell without debubbler

SA 6430

Flow cell with debubbler

SA 6431

Start up kit flame photometer

26710450

Flame photometer single channel

26710900

Flame photometer dual channel

26710910

5.5 Other detectors and meters plus accessories

Flame photometer

Air compressor silent, for 26710900/910 flame photometer

26710920

Page 37: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

SA 3401 Flow cell 10 mm with debubbler, including spacer SA 3411 Flow cell 10 mm without debubbler 1.0 mm ID, including spacerSA 6275 Flow cell 50 mm with debubbler, for SA 6270/55 onlySA 6400 Flow cell 5 mm with debubbler 1.8 mm ID, including spacerSA 6401 Flow cell 10 mm with debubbler 1.8 mm ID, including spacer SA 6403 Flow cell 30 mm with debubbler 1.8 mm ID, including spacerSA 6411 Flow cell 10 mm without debubbler 1.0 mm ID, including spacerSA 6413 Flow cell 30 mm without debubbler 1.0 mm ID, including spacerSA 6415 Flow cell 50 mm without debubbler 1.0 mm ID SA 6421 Flow cell 10 mm tube shape SA 6423 Flow cell 30 mm tube shape SA 6425 Flow cell 50 mm tube shape SA 6430 Flow cell without debubbler for 6310 SA 6431 Flow cell with debubbler for 6310 SA 6441 Flow cell 10 mm for bubble gating, including spacer SA 6443 Flow cell 30 mm for bubble gating, including spacer SA 6445 Flow cell 50 mm for bubble gating SA 6460 Flow cell 5 mm for color in beer and wort 1.4 mm, including spacerSA 6461 Flow cell 10 mm color in beer 1.4 mm ID, including spacer SA 6475 * Flow cell 50 mm without debubbler tube shape SA 6701 Flow cell 10 mm quartz for SA 6700/6750, including spacer

SA 6501 Filter 340 nmSA 6503 Filter 350 nmSA 6506 Filter 365 nmSA 6507 Filter 370 nmSA 6511 Filter 390 nmSA 6513 Filter 400 nmSA 6514 Filter 405 nmSA 6515 Filter 410 nmSA 6517 Filter 420 nmSA 6518 Filter 425 nmSA 6519 Filter 430 nmSA 6520 Filter 435 nmSA 6521 Filter 440 nmSA 6523 Filter 450 nmSA 6525 Filter 460 nmSA 6527 Filter 470 nmSA 6529 Filter 480 nm

SA 6531 Filter 490 nmSA 6533 Filter 500 nmSA 6534 Filter 505 nmSA 6535 Filter 510 nmSA 6537 Filter 520 nmSA 6539 Filter 530 nmSA 6541 Filter 540 nmSA 6542 Filter 545 nmSA 6543 Filter 550 nmSA 6544 Filter 555 nmSA 6545 Filter 560 nmSA 6547 Filter 570 nmSA 6549 Filter 580 nmSA 6551 Filter 590 nmSA 6553 Filter 600 nmSA 6555 Filter 610 nmSA 6557 Filter 620 nm

SA 6559 Filter 630 nm SA 6561 Filter 640 nmSA 6562 Filter 645 nmSA 6563 Filter 650 nmSA 6565 Filter 660 nmSA 6571 Filter 690 nmSA 6573 Filter 700 nmSA 6575 Filter 710 nmSA 6577 Filter 720 nmSA 6595 Filter 810 nmSA 6597 Filter 820 nmSA 6601 Filter 840 nmSA 6609 Filter 880 nmSA 6635 Filter 1010 nmSA 6801 Filter 275 nmSA 6803 Filter 280 nm

SA 6610 Grey filters 0.6 OD 6 pcs. 1.0 OD 6 pcs.

Flow cell 50 mm

Flow cell 30 mm + spacer

Flow cell 10 mm + spacer

5.6 Flow cells

5.7 Filters

37

* To be used with applications using Chloroform extraction

Page 38: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Section 6: Data handling6.1 Software

38

FlowAccess®, Microsoft® Windows™ based data aquasition software program

48500302

FlowReport®, Microsoft® Windows™ based software program for customized data output protocols

48503305

6.2 Analogue interface

28502951 Extension set analogue for upgrade from 2 to 4 channels 28502954 Extension set analogue for upgrade from 4 to 8 channels 28502956 Extension set analogue for upgrade from 8 to 16 channels

28502961 System controller extension set includes 1 x socket bench 220/240 V, 50 Hz or 110/120 V, 60 Hz 28502962 System controller extension set includes 2 x socket bench 220/240 V, 50 Hz or 110/120 V, 60 Hz

28502970 Extension set for RS232 connection of max. 3 PC controlled samplers

28505900 CFA interface includes desktop computer, printer, and FlowAccess® WindowsTM software 220/240 V, 50 Hz or 110/120 V, 60 Hz

6.3 Digital interface

Page 39: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

6.3 Digital interface, continued

39

28505901 Digital matrix detector 220/240 V, 50 Hz or 110/120 V, 60 Hz

28505902 Digital dual channel detector 220/240 V, 50 Hz or 110/120 V, 60 Hz

28505911 Digital turbo matrix detector 220/240 V, 50 Hz or 110/120 V, 60 Hz

28503921 Board insert for the interfacing of one (1) analogue input28503922 Board insert for the interfacing of two (2) analogue inputs28503924 Board insert for the interfacing of four (4) analogue inputs28503928 Board insert for the interfacing of eight (8) analogue inputs28503930 Board insert for the interfacing of ten (10) analogue inputs

28503951 Extension set digital for interface & detector upgrade 2 to 4 and 6 to 8 channels 28503952 Extension set digital for interface & detector upgrade 4 to 6 channels 28503953 Extension set digital for interface & detector upgrade 4 to 8 channels 28503961 System controller extension set includes one socket bench 220/240 V, 50 Hz or 110/120 V, 60 Hz28503962 System controller extension set includes two socket bench 220/240 V, 50 Hz or 110/120 V, 60 Hz 28503970 Extension set for RS232 connection of maximum three PC controlled samplers

28505940 Socket bench, 220/240 V, 50 Hz or 110/120 V, 60 Hz Please state which plug type required

25121834 Adaptor cable for socket bench 28505940 to connect interface or chemistry unit (special)

28505922 Analogue insert for 2 channels 28505924 Analogue insert for 4 channels 28505928 Analogue insert for 8 channels

28505930 System controller extension set incl. 1x socket bench 230V, 50Hz or 110/120V, 60Hz

28505931 Upgrade kit System Controller

28505970 Sampler Extension

Cable digital photometer head to interface for 28505901/02/11 1.5 meter

28505810

Page 40: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Section 7: Supplements and Accessories7.1 Rinsing valves and accessories

40

Rinsing valve 10 channel, manual operated

SA 1500

Plunger for SA 1500/21

21500302

“O” ring for 21500302 10 pcs.

SA 1502

Plunger for 21530903/4/7/921530913/4/7/9

21530301

Nipple screw for SA 1500/1521 and 21530909 5 pcs.

SA 1504

Rinsing valve 10 channel, computer controlled

21530909

Block (empty) for SA 1500

21500013

Manual operation lever for SA 1500

21500035

Scale 300%

Nipple, rinsing water inlet for SA 1500/1521

90041002

Nipple, rinsing water inlet for 21530903/9

90041005

Rinsing valve 5 channel, computer controlled

21530903

Rinsing valve 4 channel acid resistant for use with SA 8502/8503 interface, computer controlled

21530902

Rinsing valve 5 channel for SA 8505 interface, computer controlled

21530913

Rinsing valve 4 channel acid resistant for SA 8505 interface, computer controlled

21530912

Rinsing valve 10 channel for SA 8505 interface, computer controlled

21530919

Rinsing valve 5 channel + 2 channel acid resistant for SA 8502/ 8503 interface, computer controlled

21530907

Rinsing valve 5 channel + 2 channel acid resistant for SA 8505 interface, computer controlled

21530917

Page 41: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

7.2 Distillation unit accessories

Distillation unit with gas flow through reactor

SA 5268

41

Condenser, glass

SA 5371

Distillation unit glass, with reagent inlet

SA 5361

Dustcover for SA 3000/5000 with distillation unit

25121041

Distillation unit glass

SA 5362

Dustcover for distillation unit including spacer SA 3000/5000

25121340

Air/Liquid separator

SA 5370

Bracket for dust coverSA 3000/5000 with distillation unit

25121038

Air restrictor cyanide distillation

2CA14031

Vacuum pump cyanide distillation

SA 9031

Support for stand alone distillation unit

29990105

Dust cover for stand alone distillation unit

29990106

Page 42: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

7.3 Digester and accessories

Digester UV-A in-line complete 220/240 V, 50 Hz or 110/120 V, 60 Hz

SA 5580

42

Housing for SA 5555 digester

SA 5559

Connection nipple for ventilation SA 5550 digester

SA 5554

Coil quartz for SA 5550/80 UV-A digester

SA 5365

Coil Boro-Silicate for SA 5555 digester4.0 x 2.0 mm OD x ID

SA 5560

Lamp for SA 5555/90 digester

SA 5556

Lamp for SA 5550/80 digester

SA 5551

Digester UV-B in-line complete220/240 V, 50 Hz or 110/120 V, 60 Hz

SA 5590

Coil Boro-Silicate for SA 5555/90 digester, 4.0 x 1.5 mm OD x ID

SA 5557

Power supply for SA 5550/80 digester 220/240 V, 50 Hz or 110/120 V, 60 Hz

SA 5552

Power supply for SA 5555 digester220/240 V, 50 Hz or 110/120 V, 60 Hz

SA 5558

Housing for SA 5550 digester

SA 5553

DiscontinuedSA 5550 Digester UV-A SA 5555 Digester UV-B

Power supply for SA 5590 digester 220/240 V, 50 Hz or 110/120 V, 60 Hz

SA 5549

Coil Boro-Silicate for SA 5590 digester, 4.0 x 2.0 mm OD x ID

SA 5561

Page 43: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

7.4 Block digester and accessories

43

Rubber ring for SA 5750

SA 5755

Exhaust tube for SA 5750

SA 5751

Rack for SA 5620

SA 5621

Digester tube 75 ml for SA 5620, calibration mark at 20 ml 20 pcs.

SA 5394

Exhaust head for SA 5620

SA 5760

Collection tube for SA 5750

SA 5752

Rack for SA 5640

SA 5641

Digester tube 75 ml for SA 5640 20 pcs.

SA 5395

Exhaust tube for SA 5760

SA 5761

Exhaust tube rack for SA 5750

SA 5753

Scrubber system for SA 5750/60

SA 5730

Digester tube 250 ml for SA 5620 20 pcs.

SA 5396

Collection tube for SA 5760

SA 5762

PTFE ring for SA 5750

SA 5754

Exhaust head for SA 5640

SA 5750

SA 5620 Block digester for 20 tubes, 250 ml 230 V, 50 Hz

SA 5630 Block digester for 20 COD tubes, 230 ml 230 V, 50 Hz

SA 5640 Block digester for 42 tubes, 75 ml 230 V, 50 Hz

Controller for SA 5620/30/40 230 V, 50 Hz (replaces SA 5600 controller)

25600900

Page 44: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

7.4 Block digester and accessories, continued

Exhaust tube rack for SA 5760

SA 5763

44

Heating element for SA 5620/30/40

25600045

Scrubber glassware for SA 5730

SA 5780

PTFE ring for SA 5760

SA 5764

Exhaust-head carrier for manual lift off of rack

25600077

Bottle container StSt

SA 5782

Rubber ring for SA 5760

SA 5765

Pt100 Sensor for SA 5620/30/40

90008604

Vacuum pump for SA 5730, 230 V

SA 5783

Acid resistant connection tubing 3 m

SA 5770

Mobile tray for SA 5730

SA 5785

Page 45: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

21250902 Enzyme deactivation unit two channel, 220/240 V, 50 Hz

21250903 Enzyme deactivation unit two channel, 110 V, 60 Hz 21250904 Enzyme deactivation unit two channel, 240 V, 50 Hz

45

Cooling/heating bath for circulation 220/240 V, 50 Hz or110/120 V, 60 Hz

SA 5505

7.5 Other supplements

Enzyme deactivation unit

Flow meter 45 l/h

SA 1330

Micro flow meter 15 l/h

SA 1331

Electric valve gas flow 220/240 V, 50 Hz or 110/120 V, 60 Hz Requires system controler

SA 1332

Support for flow meter SA 1330/31

29990103

Flow meters and valve

Water bath for circulation 220/240 V, 50 Hz or 110/120 V, 60 Hz

SA 5501

Water bath

Page 46: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Recorder accessories

SA 7031 Recorder paper roll for SA 7011/21 25 pcs. SA 7041 Recorder pen red for SA 7011/21 5 pcs. SA 7042 Recorder pen blue for SA 7011/21 5 pcs. SA 7043 Recorder pen green for SA 7011/21 5 pcs. SA 7044 Recorder pen black for SA 7011/21 5 pcs. SA 7045 Recorder pen red long for SA 7021 5 pcs. SA 7055 Recorder paper roll for SA 7052, set 10 pcs. SA 7532 Recorder paper fanfold for SA 7503/04/05/06 10 pcs. SA 7540 Recorder pen blue for multi pen recorder 5 pcs. SA 7541 Recorder pen red for multi pen recorder 5 pcs. SA 7542 Recorder pen green for multi pen recorder 5 pcs. SA 7543 Recorder pen black for multi pen recorder 5 pcs. SA 7544 Recorder pen brown for multi pen recorder 5 pcs. SA 7545 Recorder pen violet for multi pen recorder 5 pcs.

46

Page 47: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Cat. No. Item Page No.

SA 1011 Sample needle 7SA 1012 Sample needle 7SA 1013 Sample needle 7SA 1014 Sample needle 7SA 1015 Sample needle, anti cup lift 7SA 1016 Sample needle 7SA 1017 Sample needle 7SA 1018 Sample needle 7SA 1020 Sample cups 4SA 1021 Sample cups 4SA 1022 Sample cups 4SA 1023 Sample cups 4SA 1024 Filette sample filter system 10SA 1025 Sample cups 5SA 1026 Sample cups 5SA 1027 Sample cups 5SA 1030 Sample cups 5SA 1032 Sample cups 5SA 1033 Sample tubes 5SA 1034 Sample tubes 5SA 1036 Sample tubes 5SA 1037 Sample tubes 5SA 1038 Sample caps 5SA 1050 Auto Sampler 4SA 1053 Auto Sampler 4SA 1060 Pump tubing 10/28SA 1061 Pump tubing 10/28SA 1065 Pump head 9SA 1074 Auto Sampler 4SA 1075 Auto Sampler 4SA 1080 Sample valve extension set 10SA 1091 Tubing 10SA 1100 Sampler digital 4SA 1150 Sampler digital 4SA 1330 Flow meter 45SA 1331 Micro flow meter 45SA 1332 Electric valve 45SA 1500 Rinsing valve 40SA 1502 “O” ring 40SA 1504 Nipple screw 40SA 2010 Grease 12SA 3000 Module holder 12SA 3002 to SA 3094 Pump tubing 27SA 3142 Tubing 29SA 3150 Tubing 29SA 3230 Manifold 17SA 3231 Manifold 17SA 3235 Manifold 17SA 3236 Manifold 17SA 3271 Dialyzer 24SA 3272 Dialyzer 24SA 3274 Dialyzer 24SA 3275 Dialyzer 24SA 3310 to SA 3317 Coils, glass 21SA 3401 Flow cell 37SA 3411 Flow cell 37SA 3521 Reactor 23SA 5000 Module holder 12SA 5020 to SA 5094 Pump tubing 28

Cat. No. Item Page No.

SA 5102 Module mounting plate 16SA 5107 Module mounting plate 16SA 5108 Module mounting plate 16SA 5109 End block 16SA 5110 Mounting clamp 16SA 5111 Mounting clamp 16SA 5113 Mounting clamp 16SA 5114 Mounting clamp 16SA 5115 Module mounting plate 16SA 5116 Module mounting plate 16SA 5130 to SA 5194 Tubing 29SA 5200 to SA 5215 Manifolds 17SA 5218 Pressure/liquid separator 25SA 5219 Pinners 12SA 5216 to SA 5246 Manifolds 18 SA 5247 to SA 5263 Manifolds 19SA 5267 Conductivity cell 36SA 5268 Distillation unit 41SA 5271 to SA 5276 Dialyzers 24SA 5280 Membrane 24SA 5282 Membranes pre-mount 24SA 5283 Membranes pre-mount 24SA 5284 Membranes 24SA 5290 Valve 25SA 5291 Tubing 25/29SA 5292 Fitting and ring 25SA 5293 Automatic switching valve 25SA 5295 Micro pH electrode 36SA 5300 to SA 5308 Coil + heat-exchanger 21SA 5310 to SA 5318 Coils glass 21SA 5320 to SA 5329 Coils glass 21SA 5330 Heat-exchanger 21SA 5331 Heat-exchanger 21SA 5332 Heat-exchanger 21SA 5333 Tube conector 22SA 5334 Heat-exchanger 21SA 5335 Heat-exchanger 21SA 5336 “O” rings 22SA 5337 “O” rings 22SA 5338 “O” rings 22SA 5339 Screw, nylon 22SA 5344 Heat-exchanger 21SA 5346 Heat-exchanger 21SA 5349 Decanting coil 19SA 5355 Column, glass 25SA 5357 Column, unfilled 25SA 5358 Column, filled 25SA 5359 Tube, glass 25/29SA 5360 Tube, glass 25/29SA 5361 Distillation unit, glass 41SA 5362 Distillation unit, glass 41SA 5365 Coil quartz 42SA 5370 Air/Liquid separator 41SA 5371 Condenser, glass 41

47

Page 48: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Cat. No. Item Page No.

SA 5373 Column, unfilled 25SA 5374 Column, filled 25SA 5380 Sinker, glass 12SA 5381 Reagent filter 12SA 5382 Reagent bottle 12SA 5383 Container 12SA 5384 Container 12SA 5385 Container 12SA 5386 Bottle 12SA 5387 Reagent bottle 12SA 5388 Plastic bottle 12SA 5389 Container 12SA 5394 Digester tube 43SA 5395 Digester tube 43SA 5396 Digester tube 43SA 5400 to SA 5415 Sleeves 29SA 5418 Lubricant 12SA 5419 Glue for Tygon 12SA 5421 Fastener Perspex 19/24/25SA 5423 Fastener nylon 22SA 5424 Tubing connector 25SA 5431 to SA 5436 Needles 30SA 5454 to SA 5458 Nipples 30SA 5501 Water bath for circulation 45SA 5504 Connector 30SA 5505 Cooling/heating bath 45SA 5521 Reactor 23SA 5522 Reactor 23SA 5523 Reactor 23SA 5524 Reactor 23SA 5527 “O” ring and oil 23SA 5530 Back pressure regulator 25SA 5531 Reactor 23SA 5549 Power supply UV-B 42SA 5551 Lamp UV-A 42SA 5552 Power supply UV-A 42SA 5553 Housing for UV-A 42SA 5554 Connection nipple 42SA 5556 Lamp for UV-B 42SA 5557 Coil UV-B 42SA 5558 Power supply UV-B 42SA 5559 Housing for UV-B 42SA 5560 Coil UV-B 42SA 5561 Coil Boro-Silicate 42SA 5580 Digester UV-A 42SA 5590 Digester UV-B 42SA 5620 Block digester 43SA 5621 Rack 43SA 5630 Block digester 43SA 5640 Block digester 43SA 5641 Rack 43SA 5703 Toolkit 13SA 5705 Glass bottle 25SA 5706 Waste bottle 25SA 5707 Overflow bottle 25SA 5708 Antidote collecting tube 25SA 5709 Safety air scrubber glass 25SA 5710 Glass tube 26SA 5711 Glass tube 26

Cat. No. Item Page No.

SA 5720 Reagent bottle 26SA 5725 Waste bottle 26SA 5730 Scrubber system 43SA 5750 Exhaust head 43SA 5751 Exhaust tube 43SA 5752 Collection tube 43SA 5753 Exhaust tube rack 43SA 5754 PTFE ring 43SA 5755 Rubber ring 43SA 5760 Exhaust head 43SA 5761 Exhaust tube 43SA 5762 Collection tube 43SA 5763 Exhaust tube rack 44SA 5764 PTFE ring 44SA 5765 Rubber ring 44SA 5770 Acid resistant tubing 44SA 5780 Scrubber glassware 44SA 5781 Wash bottle, glass 13SA 5782 Bottle container StSt 44SA 5783 Vacuum pump 44SA 5785 Mobile tray 44SA 6054 Electrode solution 35SA 6055 Electrode solution 35SA 6200 2-Channel photometer 31SA 6205 Photometer insert 31SA 6250 Photometer matrix 31SA 6255 Photometer insert 31SA 6260 Photometer insert 32SA 6270 Turbo matrix photometer 32SA 6275 Flow cell with debubbler 37SA 6280 IR detector 36SA 6310 Fluorimeter 36SA 6400 to SA 6475 Flow cells 37SA 6430 Flow cell 36/37SA 6431 Flow cell 36/37SA 6443 Flow cell 34/37SA 6501 to SA 6609 Filters 37SA 6610 Grey filters 37SA 6635 Filter 37SA 6701 Flow cell quartz 34/37SA 6703 Inlet and outlet tubing 34SA 6711 Deuterium lamp 34SA 6712 Deuterium lamp 34SA 6752 Flow cell holder 34SA 6801 Filter 34/37SA 6803 Filter 34/37SA 6811 Deuterium lamp 34SA 6850 Photometer UV 34SA 7031 to SA 7545 Recorder accessories 46SA 8640 Signal offset compensator 36SA 9031 Vacuum pump 41SA 9220 to SA 9240 Manifolds 19SA 9241 to SA 9245 Manifolds 20SA 9370 Air/liquid separator 26SA KIT Analyzer start- up kit 13SP400 Interface for pH/ISE 35

48

Page 49: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Cat. No. Item Page No.

SC 13900 to SC 13916 Chemicals / reagents 152CA10095 Safety vessel glass 262CA14031 Air restrictor 412CA14321 Sleeves 2921000005 Tubing clamp 1021000009 Holder for rinsing vessel 721000038 Sample needle holder 721000052 Rinsing vessel 721000074 Mounting screw 721000306 Rinsing vessel 821000312 Dust cover 621000315 Cup plate 621050027 Plunger 1021050028 Needle holder 821050030 Pulley for Z cable 921050031 Z Cable 921050033 Rinsing vessel holder 821050034 Tubing holder 1021050039 Cover plate for valves 1021050043 Cover plate for diluter 1021050061 Spring for Z cable 921050070 Needle guide 1021050072 Needle guide 1021050090 Sample rack 621050104 Sample needle 821050105 Rinsing vessel 821050122 Purge needle 821050340 Standards container 521050350 Sample rack 621050351-B Sample rack 621050352 Sample rack 621050811 Auto diluter station 1021050902 Rinsing pump 921050914 Auto diluter station 1021050951 Mixing device 1021050952 Mixing device 1021053951 Mixing device 1021070029 Rack for standard containers 621070176 Rinsing vessel glass 821070207 Spring, tube guiding 1021070221 Rinsing vessel glass 821070325 Rinsing pump 921070330 Sample rack 621070337 Sample rack 621070339 Rack for standard containers 621070341 Sample needle holder 821070345 Sample needle extension set 621070451 Upgrade kit 1021074013 Needle guide 821074018 Needle holder 821074108 Needle guide 821074321 Upgrade set 1021074322 Upgrade set 1121074324 Upgrade set 1121074325 Upgrade set 1121074326 Risers for sample rack 621074340 Holder + standard containers 621074341 Container for standards 521074350 Sample rack 621074360 Exchange set 621074811 Auto diluter station 11

Cat. No. Item Page No.

21074914 Auto diluter station 1121074933 Mixing device 1121074934 Mixing device 1121075001 Sample needle 821075002 Purge needle 821075340 Standards container 621075350 Sample rack 621090851 Cable RS232 1121100048 Standards insert 621100315 Cup plate 621100316 Cup plate 621100320 Valve electric 1121100325 Upgrade kit 1121100340B Dust cover 721250902 Enzyme deactivation unit 4521250903 Enzyme deactivation unit 4521250904 Enzyme deactivation unit 4521500013 Block (empty) 4021500035 Manual operation lever 4021500302 Plunger 4021530301 Plunger 4021530902 Rinsing valve 4021530903 Rinsing valve 4021530907 Rinsing valve 4021530909 Rinsing valve 4021530912 Rinsing valve 4021530913 Rinsing valve 4021530917 Rinsing valve 4021530919 Rinsing valve 4022100901 Pump 1422100902 Pump 1422102901 Pump 1422102902 Pump 1422300010 Handle for pump deck 1422300012 Cogwheel pump side 1422300045 Cogwheel motor side 1422300071 Cogwheel 1422300312 Roller Cage 1422300317 Springs 1422300319 Pump deck 1422300320 Needle block 1422300331 Bubble injector 1422300354 Pump 1422300355 Pump 1425120051 Waste receptacle 11/1325120112 Base mounting plate 1325120114 Dust cover 1325120124 Mounting plate 1325120312 Mounting plate 2625120320 Motor 1425121037 Dust cover 1325121038 Bracket 4125121041 Dust cover 4125121315 Pump 1325121340 Dust cover 4125121704 PCB 1325121705 PCB 1325121834 Adaptor cable 3925200105 Manifold holder 1625201300 to 25201307 Membranes 2425201902 Dialyzer 24

49

Page 50: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Cat. No. Item Page No.

28505900 CFA interface complete 3828505901 Digital matrix detector 3928505902 Digital detector 3928505911 Digital detector 3928505922 Analogue insert 3928505924 Analogue insert 3928505928 Analogue insert 3928505930 System controller extension 3928505931 Upgrade System Controller 3928505940 Socket bench 3928505970 Sampler Extension 3929990103 Support for flow meter 4529990105 Support for distillation unit 4129990106 Dust cover 4148500302 FlowAccess® software 3848503305 FlowReport® software 3890006016 Capicitor 1490006020 Capicitor 1490008604 Pt100 Sensor 4490008622 Thermal Fuse 2490008624 Thermal switch 2490012391 Socket bench 1390015001 Power cord 1390015009 Power cord 1390015028 Cable RS 232 1190015029 Cable RS 232 1190015030 Cable 3390015518 Valve 1190015536 Ball valve 2690015605 Dial 3390020006 Lamp 3690020011 Indication light 3390020012 Lamp 3390020768 Motor 1590020772 Motor 1590020806 Motor 990020807 Motor 990020808 Motor 990020809 Motor 990020810 Motor 990020862 Motor 990020864 Motor 990020865 Motor 990020881 Motor 1590024107 Push button 1390028006 Cooling fan 1390028010 Cooling fan 1390028118 PCB 1390028120 Temperature controller 1390035097 Container for standards 590035100 Container for standards 590035109 Bottle 1290035110 Bottle 1290035652 Clamp 1690035653 Clamp 1690037513 Mounting clamp 1690037819 Male connector 2690037853 Cap with O-ring 2690037858 Cap with O-ring 2690037859 Cap with O-ring 2690039101 Connector 13/3090039102 Connector 14/30

Cat. No. Item Page No.

25201903 Dialyzer 2425201904 Dialyzer 2425201905 Dialyzer 2425300005 Cap 2225300021 Cap 2225300030 Mounting clamp 16/2625300041 Cap 2225300042 Tube connector 2225500030 Insolation set 2325500031 Heating element 2325500032 Heating element 2325500033 Pt 100 element 2425500045 to 25500161 Coils for reactor 2325500814 Extension cable 2425500911 to 25500947 Reactors 2325540900 Controller reactor 2325540901 Controller reactor 2325540902 Controller reactor 2325600045 Heating element 4425600077 Exhaust-head carrier 4425600351 Boiling granules 1525600900 Controller 4326000703 Photometer lamp 3326050003 Chamber reference electrode 3526200700 PCB 3326200809 Cable converter 3326200813 Cable 3326200902 Photometer head 3326200903 Photometer head 3326300803 Cable 3326400320 Flow cell 3526400321 Power supply 3526400900 Power supply 3326400910 Photometer head 3326400920 Photometer head 3326401910 Photometer head 3326401920 Photometer head 3326710450 Start up kit 3626710900 Flame photometer 3626710910 Flame photometer 3626710920 Air compressor silent 3628502951 Extension set 3828502954 Extension set 3828502956 Extension set 3828502961 System controller 3828502962 System controller 3828502970 Extension set 3828503810 Cable 3328503921 Board insert 3928503922 Board insert 3928503924 Board insert 3928503928 Board insert 3928503930 Board insert 3928503951 Extension set 3928503952 Extension set 3928503953 Extension set 3928503961 System controller 3928503962 System controller 3928503970 Extension set 3928505810 Cable 39

50

Page 51: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

Cat. No. Item Page No.

90040336 Pressure regulator 1490040337 Tube connector 1490041002 Nipple 4090041005 Nipple 4090041086 Clamp for pump tube 1690041448 Tubing 2990041469 Tubing 2990050501 Photometer photocell 3390050502 Photometer photocell 3390103051 Electrode 3590103053 Electrode 3590103061 Cable for ISE detector 35

Notes

Cat. No. Item Page No.

90039206 Syringe 10 ml 1190039208 Syringe 25 ml 1190039209 Syringe 10 ml, salt line 1190039210 Plunger foe syringe 1190039270 Valve block 990039272 Valve block 990039524 O-ring 1190039526 O-ring 2290039535 O-ring 3590039536 O-ring 3590039581 O-ring 2290040014 Pump for air injection 1590040307 Tube connector 15

Page 52: THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS …archive.ssc-ras.ru/eg/Equipment/SKALAR_San++/DVD/SAN++ Hardware Manuals... · 5 1.2 Sample and standards containers, continued Sample

For more information please contact us;-

Headquarters Skalar Analytical B.V. Tel. +31 (0)76 5486 486 Tinstraat 12 Fax. +31 (0)76 5486 400 4823 AA Breda Email: [email protected] The Netherlands Internet: http://www.skalar.com

USA Skalar, Inc. 5995 Financial Drive, Suite 180 Norcross, GA 30071 Tel. + 1 (1)770 416 6717 Toll Free: 1 800 782 4994 Fax. + 1 (0)770 416 6718 Email: [email protected]

United Kingdom Skalar (UK) Ltd. Breda House Millfield Industrial Estate Wheldrake, York YO19 6NA Tel. + 44 (0)1904 444800 Fax. + 44 (0)1904 444820 Email: [email protected]

France Skalar Analytique S.A.R.L. 79, Avenue Aristide Briand 94110 Arcueil France Tel. + 33 (0)1 4665 9700 Fax. + 33 (0)1 4665 9506 Email: [email protected]

Germany Skalar Analytic GmbH Gewerbestraße Sud 63 41812 Erkelenz Germany Tel. + 49 (0)2431 96190 Fax. + 49 (0)2431 961970 Email: [email protected]

Austria Skalar Analytic GmbH Am Anger 22 A-7451 Oberloisdorf Austria Tel. + 43 (0)2611 2023411 Fax. + 43 (0)2611 2023412 Email: [email protected]

Belgium Skalar Belgium bvba Antwerpsestraat 126 2850 Boom Belgium Tel. + 32 (0)3888 9672 Fax. + 32 (0)3844 3441 Email: [email protected]

or the agent in your country:-


Recommended