�OTICE
Sub: LIMITED TE�DER �OTIFICATIO� FOR PRI�TI�G OF ICR
SCA��ABLE SCHEDULES WITH VARIABLE PRI�TI�G
Due date & time for submission Date Time
of filled-in Tender: 27.4.2009 1300 hrs Date & Time of opening of the 27.4.2009 1500 hrs
Tender Dispatch of schedules to the consignees (Page 7 of Tender Document)
The specifications of the packing material (Corrugated Box) as
approved by Department of Posts are as follows: Particulars Box Type -1 (5-Ply)
(To accommodate about
1,000 A3 size sheets)
Box Type -2 (3-Ply)
(To accommodate about
100 A3 size sheets)
Grammage (gm/m)
Outer Ply
2nd Ply
3rd Ply
4th Ply
Inner Ply
180
140
140
140
180
180
140
-
-
180
Type of Flute
Outer Ply
Inner Ply
B
C
B
-
Bursting Strength kg/cm2
(minimum)
12.00 9.50
Edge Crust Test kgf/m
(minimum)
1100 700
Moisture content (%) 7-10 7-10
Cobb Value gm/m2
(maximum)
100 100
External Dimensions mm
(L x W x H)
490 mm x 305 mm x 150
mm
430 mm x 307 mm x 30
mm
Box Joint Double copper staples Pasted
Style As per drawing (Box B) As per drawing (Box A)
Adhesive Starch based Starch based
Gap between two pair of staple pins (mm)
25 -
Angle of staples 45 degree -
GE�ERAL SPECIFICATIO�S
1. In case of Box-A, multi-layer kraft paper (28 BF) to be used for inner & outer
ply and middle ply semikraft (22 BF) to be used.
2. In case of Box-B, multi-layer kraft paper (28 BF) to be used for inner & outer
ply and 2nd, 3
rd and 4
th plies semikraft (22 BF) to be used.
3. Bottom to be pasted with interlock in Box-B.
4. Both side self adhesive tapes of 24 mm width to be placed as shown in
diagram and of required dimensions. The adhesive strength to steel of
minimum 5 N/10mm should be used.
5. References
a. IS:1060 (Part-I);
b. IS:7028 (Part-VI);
c. IS:7063 (Part-I);
d. IS:4006 (Part-I);
e. IS:2771 (PartI);
f. ASTM:D-2658;
g. IS:8402
Deputy Director (Hqrs)
Office of the Registrar General, India
Ministry of Home Affairs
2/A, Man Singh Road,
�ew Delhi-110 011.