The Total Wire & Cable Solution OEM Systems Integration & Automation Industry
Table of Contents
inTroduCTion 3
Wire & Cable 4 – 20
Cord SeTS & ConneCTor aSSemblieS 21 – 30
aCCeSSorieS 31 – 34
CuSTom Cable 35
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
2
Standard Flex™ Cord & Cable ..................................................................................................................................................4
Standard Flex™ Power Cable ...................................................................................................................................................5
Standard Flex™ 2Kv Power Cable ............................................................................................................................................6
Standard Flex™ Cord & Cable ..................................................................................................................................................7
TPC Type TC Power Cable ......................................................................................................................................................8
4/0 Type TC-ER Power Cable ..................................................................................................................................................9
600 Volt Welding Cable .........................................................................................................................................................10
Grounding Cable & Ground Straps .........................................................................................................................................11
Trex-Onics® Low Capacitance VFD Shielded Power Cable .....................................................................................................12
Trex-Onics® Low Capacitance VFD Shielded Power Cable with Brake & Signal Pairs .............................................................13
Super-Trex® VFD Shielded Power Cable ................................................................................................................................14
Super-Trex® Reduced Diameter Control Cable (20 AWG) .......................................................................................................15
Super-Trex® Reduced Diameter Control Cable (18 AWG) .......................................................................................................16
Super-Trex® Reduced Diameter Control Cable (16 AWG) .......................................................................................................17
Trex-Onics® Industrial Ethernet Patch/Work Area CAT7A & CAT6A Cable ..............................................................................18
Trex-Onics® Industrial Ethernet Shielded Horizontal CAT6A Cable ..........................................................................................19
Trex-Onics® Industrial Ethernet CAT5E / 2-Pair Cable ............................................................................................................20
DC Micro M12 Single Key Quick-Connects™ ..........................................................................................................................21
DC 18 Micro M12 Single Key Quick-Connects™ Receptacles .................................................................................................23
Field Installable AC & DC Micro Connectors ...........................................................................................................................25
Trex-Onics® DeviceNet™ Flex-Net Cable Mini Assemblies .......................................................................................................26
Trex-Onics® DeviceNet™ Quick-Connect™ Wiring System Accessories ....................................................................................28
Trex-Onics® Flex-Net Receptacles for DeviceNet™ Applications ..............................................................................................30
Kord-Gard® Mesh Cord Grips ................................................................................................................................................31
Aluminum Straight and 90° Grip-Seals® .................................................................................................................................32
Vulko-Wrap® Insulating Tape (Yellow & Black) ........................................................................................................................33
Abrasion Resistant Ultra-Sleeve High Temperature Sleeving with Closures .............................................................................34
Specializing in oems
TPC Wire & Cable Corp. is an innovative producer of wire, cables and connectors used in harsh industrial environments. Through nearly 40 years of progressive development and refinement, our products and accessories deliver reliable performance where other wire and cables consistently fail, withstanding abuse from impact, abrasion, chemicals, flexing, and extreme temperatures. TPC Wire & Cable designs and markets products that keep your operations running safe and sure. Our products and accessories effectively serve a broad spectrum of industries including steel, utility, mining, automotive, food & beverage, government, oil & gas, transportation and wood, pulp & paper markets.
Our products are backed by exceptional customer service all the way from sales to engineering to distribution. We understand how important streamlined ordering and on-time deliveries are to our customers and we work hard to make it happen.
TPC Wire & Cable products are designed for performance and durability. That durability pays for itself, especially when you consider downtime from lost production, replacement costs, maintenance, repair and administrative or regulatory challenges caused by failed wire, cables and connectors. From large bulk orders of wire connectors to a completely customized set of cable connectors, TPC Wire & Cable is the one company that can produce and ship everything you need in one order. We look forward to serving your wire and cable needs.
TPC Wire & Cable has been servicing the automotive OEM industry for more than 20 years. During this time, we developed a broad line of products to suit your cable needs including a full range of portable cord, power cable, and multi-conductor control cable as well as shielded cable products. In 2010, we began expanding our OEM outreach program with a focus on providing:
• Productsdesignedtomeetyourspecifications
• Productinstockoravailablewithshortleadtimes
• CompetitivePricing
• CustomWire&CableSolutions
• CustomCutting
• CustomMarking(CustomPrintingServices)
• FieldSalesRepresentatives
• EngineeringSupport
At TPC Wire & Cable, we work closely with our Engineering and Purchasing departments to develop solution-based products to meet the demanding environments of our OEM customers.
Our products are designed and engineered to stand up to your toughest applications, including:
• StaticTrayCables
• High-FlexMulti-AxisRobotics,ReelingandPowerTracks
• ExtremeTemperatures-70°Cto538°C
• Chemical/Coolants/CausticEnvironments
•WealsospecializeinenvironmentalextremesinvolvingHeat,ColdandChemicals.
3exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
3
TYPE
TC-
ER S
TAND
ARD
FLEX
CAB
LE
Wire & Cable / Standard Flex™ Cord & Cable
TPC Standard-Flex™ Cord & Cable•ULListed •cUL •FT-4FlameRating •SunlightResistant•TypeTC-ER– 600V •WTTC–1,000V •MaxConductorTemperature90°C
TPC Standard-Flex™ Cord & Cable is a highly flexible, extra hard usage cord with excellent resistance to impact, cutting, abrasion, oils and most industrial chemicals. This cable also features bunch stranded soft drawn copper, high-flex tape seperator around the inner components and nylon fillers. The specially compounded TPE jacket is a superior line of defense againse tearing, abrasion, impact, oil, ozone and most chemicals.
1. bunch stranded soft drawn copper — Longer flex life in flexing and twisting applications.
2. tpe conductor insulation — Oil resis-tant and has high dielectric, tensile and mechanical properties.
3. conductors are coded with numeric identification — Provides fast identification of conductors. Easy to read and simplifies installation.
4. high flex tape seperator around inner components — Provides easy movement of the conductor bundle for longer flex life.
5. specially compounded tpe jacket — Superior first-line defense against tearing, abrasion, impact, oil, ozone and most chemicals. Flame and heat-resistant. Extreme all-weather flexibility.
6. nylon fillers — Low friction, non-wicking fillers provide excellent flexibility.
2
4
1
3
5
FeaTUreS & beneFiTS
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no.
Cord Size aWG/Cond
ConduCTor STrandinG aMPaCiTy1 inSulaTion
ThiCkneSS (IN)JaCkeT
ThiCkneSS (IN)nominal o.d. (IN)
WT. (LBS) Per 1000'
76202 16/5 26/30 14.4 0.016 0.045 0.375 97
76198 16/4 26/30 18 0.016 0.045 0.346 81
76193 16/3 26/30 18 0.016 0.045 0.320 65
76195 14/5 41/30 20 0.016 0.045 0.430 133
76199 14/4 41/30 25 0.016 0.045 0.394 109
76403 14/3 41/30 15 0.016 0.045 0.384 90
77205 12/5 65/30 24 0.016 0.045 0.488 182
76200 12/4 65/30 30 0.016 0.045 0.438 148
76303 12/3 65/30 20 0.016 0.045 0.418 120
76205 10/5 105/30 32 0.022 0.060 0.619 287
76201 10/4 105/30 40 0.022 0.060 0.576 227
76203 10/3 105/30 25 0.022 0.060 0.561 220
no. oF ConduCTorS
1 2 3 4
Color Green/Yellow Black-1 Black-2 Black-3
NOTES: (1) Based on Table 310.15 (B) (16) of the 2008 NEC Handbook.
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
4
TYPE
TC-
ER S
TAND
ARD
FLEX
CAB
LE
Wire & Cable / Standard Flex™ poWer Cable
TPC Standard-Flex™ Power Cable•ULListed •cUL •FT-1FlameRating •SunlightResistant •TypeTC-ER– 600V •WTTC–1,000V •MaxConductorTemperature90°C
TPC Standard-Flex™ Power Cable has excellent resistance to abrasion and flexing. This cable also features an oil resistant TPE conductor insulation with high dielectric, tensile and mechanical properties. Specially compounded TPE jacket allows for extreme all-weather flexibility.
1. bunch stranded soft drawn copper — Longer flex life in flexing and twisting applications.
2. tpe conductor insulation — Oil resis-tant and has high dielectric, tensile and mechanical properties.
3. conductors are coded with numeric identification — Provides fast identification of conductors. Easy to read and simplifies installation.
4. high flex tape seperator around inner components — Provides easy movement of the conductor bundle for longer flex life.
5. specially compounded tpe jacket — Superior first-line defense against tearing, abrasion, impact, oil, ozone and most chemicals. Flame and heat-resistant. Extreme all-weather flexibility.
6. nylon fillers — Low friction, non-wicking fillers provide excellent flexibility.
2
4
1
3
5
FeaTUreS & beneFiTS
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no.
Cord Size aWG/Cond
ConduCTor STrandinG aMPaCiTy1 inSulaTion
ThiCkneSS (IN)JaCkeT
ThiCkneSS (IN)nominal o.d. (IN)
WT. (LBS) Per 1000'
61804 8/4 168/30 55 0.032 0.060 0.756 385
61805 8/5 168/30 44 0.032 0.060 0.824 465
61806 6/4 266/30 75 0.035 0.080 0.900 605
61807 4/3 413/30 104 0.045 0.080 0.98 695
61808 4/4 413/30 95 0.045 0.080 1.060 910
61809 4/5 420/30 76 0.045 0.080 1.175 1090
61810 2/4 665/30 130 0.045 0.080 1.250 1220
61803 2/3 665/30 130 0.045 0.080 1.140 1007
roTaTion 4-CondUCTor Color Code
1 Black-1
2 Black-2
3 Green/Yellow
roTaTion 4-CondUCTor Color Code
1 Green/Yellow
2 Black-1
3 Black-2
4 Black-3
5 Black-4
NOTE: (1) Ambient temperature of 30°C, conductor temperature of 90°C, not more than three current-carrying conductors. Based on NEC 2011, Table 310.15(B)(16).
5exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
Wire & Cable / Standard Flex™ poWer Cable
roTaTion 3-CondUCTor Color Code
1 Black-1
2 Black-2
3 Green
roTaTion 4-CondUCTor Color Code
1 Black-1
2 Black-2
3 Black-3
4 Green
TYPE
TC-
ER S
TAND
ARD
FLEX
CAB
LE
TPC Standard-Flex™ 2kv Power Cable•ULListed •cUL •FT-4FlameRating •SunlightResistant •2000VUL-1000VcUL •TypeTC-ER •MaxConductorTemperature90°C
TPC Standard-Flex™ 2Kv Power Cable has excellent resistance to abrasion and flexing. This cable also features an oil resistant TSE conductor insulation with high dielectric, tensile and mechanical properties. Specially compounded TSE jacket allows for extreme all-weather flexibility.
1. bunch stranded soft drawn copper — Longer flex life in flexing and twisting applications.
2. tse conductor insulation — Oil resis-tant and has high dielectric, tensile and mechanical properties.
3. conductors are coded with numeric identification — Provides fast identification of conductors. Easy to read and simplifies installation.
4. high flex tape seperator around inner components — Provides easy movement of the conductor bundle for longer flex life.
5. specially compounded tse jacket — Superior first-line defense against tearing, abrasion, impact, oil, ozone and most chemicals. Flame and heat-resistant. Extreme all-weather flexibility.
6. nylon fillers — Low friction, non-wicking fill-ers provide excellent flexibility.
2
4
1
3
5
FeaTUreS & beneFiTS
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no.
Cord Size aWG/Cond
ConduCTor STrandinG aMPaCiTy1 inSulaTion
ThiCkneSS (IN)JaCkeT
ThiCkneSS (IN)nominal o.d. (IN)
WT. (LBS) Per 1000'
61624 2/4 259 130 0.070 0.080 1.34 1351
61623 2/3 259 130 0.070 0.080 1.22 1078
NOTE: (1) Ambient temperature of 30°C, conductor temperature of 90°C, not more than three current-carrying conductors. Based on NEC 2011, Table 310.15(B)(16).
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
6
ExpErts in custom cablE and assEmbly solutions • www.tpcwirE.com Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
7TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
TYPE
TC-
ER S
TAND
ARD
FLEX
CAB
LE
Wire & Cable / Standard Flex Cord & Cable
TPC Standard-Flex™ Cord & Cables• UL Listed • cUL • FT-4 Flame Rating • Sunlight Resistant • Type TC-ER – 600 V • WTTC – 1,000 V • Max Conductor Temperature 90°C
TPC Standard-Flex™ Cord & Cable is a highly flexible, extra hard usage cord with excellent resistance to impact, cutting, abrasion, oils and most industrial chemicals. This cable also features bunch stranded soft drawn copper, high-flex tape seperator around the inner components and nylon fillers. The specially compounded TPE jacket is a superior line of defense againse tearing, abrasion, impact, oil, ozone and most chemicals.
1. bunch stranded soft drawn copper — Longer flex life in flexing and twisting applications.
2. tpe conductor insulation — Oil resis-tant and has high dielectric, tensile and mechanical properties.
3. conductors are coded with numer-ic identification — Provides fast identification of conductors. Easy to read and simplifies installation.
4. high flex tape seperator around inner components — Provides easy move-ment of the conductor bundle for longer flex life.
5. specially compounded tpe jacket — Superior first-line defense against tearing, abrasion, impact, oil, ozone and most chemicals. Flame and heat-resistant. Extreme all-weather flexibility.
6. nylon fillers — Low friction, non-wicking fillers provide excellent flexibility.
2
4
1
3
5
FeaTureS & BeneFiTS
Ordering inFOrmaTiOn (Call for pricing & availability)
ParT nO. CaBLe Size COnduCTOr
STranding
*amPaCiTY OF CaBLe
@ 90°C
** aLLOWaBLe amPaCiTY
@ 30°C
JaCkeT ThiCk-
neSS (IN)
nOminaL O.d. (IN)
WT. (LBS) Per 1000'
76201 10 AWG 4C 104 x 30 40 40 0.06 0.576 351
61863-8 6 AWG 3C w/ 8 AWG Grd 266 x 30 + 168 x 30 87 65 0.08 0.88 539
61843-8 4 AWG 3C w/ 8 AWG Grd 420 x 30 + 168 x 30 114 85 0.08 1.025 755
61820-6 2/0 3C w/6 AWG Grd 1330 x 30 + 665 x 30 237 175 0.08 1.53 1951
61373-2 373 MCM 3C w/#2 Grd 3721 x 30 + 665 x 30 433 310 0.11 2.26 4932
nO. OF COnduCTOrS
1 2 3 4
COLOr Green/Yellow Black-1 Black-2 Black-3
NOTES: *Ampacity per NEC Handbook. Table 400.5(B) - Based on ambient temperature of 30°C (86°C). **Ampacity per NEC Handbook: Table 310.16 - Allowable ampacities of insulated conductors rated 0 - 2000 volts, 60°C through 90°C (140°F through 194°F).
Wire & Cable / Standard Flex™ Cord & Cable
Supe
r-Trex
® T
YPE
TC P
OWER
CAB
LE
Wire & Cable / type tC poWer Cable
TPC Type TC Power Cable
1. bunch stranded soft drawn bare copper — Longer flex life in flexing and twisting applications.
2. tpe conductor insulation — Oil resistant and has high dielectric, tensile and mechanical proper-ties.
3. conductors are numbered — Provides fast identification of conductors. Easy to read and sim-plifies installation.
4. black heavy-duty tpe jacket— Provides superior first-line defense against industrial and envi-ronmental abuse. Resists tearing, abrasion, oil, impact, ozone, and most chemicals. Flame and heat resistant. Extreme all-weather flexibility.
FeaTUreS & beneFiTS
2
4
1
3
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
TPC Type TC 2/0 3/C and Type TC 1 AWG 3/C Plus 6 AWG Ground Cable is designed for rugged use featuring our heavy-duty TPE jacket. The result is a flexible cable that withstands abrasion and twisting, extending the life of the cable in harsh applications.
* Based on an ambient temperature of 30ºC and conductor temperature of 90ºC per NEC 2014, Table 3.10.15(B)(!6).
•ULListed•cUL•FT-4FlameRating•TypeTC-ER–600V•WTTC•MaxConductorTemperature90°C
ParT no. Cable Size aWG/Cond ConduCTor STrandinG
(PRIMARY & GROUND) aMPaCiTy1 nominal o.d. (IN)
WT. (LBS) Per 1000'
85246 1 AWG — 3 Conductor with 6 AWG Ground 259 x 30 & 133 x 30 150 0.396 172
aPPliCaTionS
• AutomationEquipment• RobotPowerSupply
• TrayCableApplications• MobileEquipment
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
8
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
9
Wire & Cable / poWer Cable
4/0 Type TC-er Power Cable
recommended minimum bend radius for Cable applications: The Minimum Bend Radius for Dynamic Applications is eight times the O.D. of the cable. Minimum Bend Radius for Static Applications is six times the O.D. of the cable.
•ULListed•cUL•CE•RoHSCompliant•MaxConductorTemp90ºC•TypeTC-ER–600V•FT-4FlameRated•UVResistant
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
Sup
er-T
rex®
TYP
E TC
POW
ER C
ABLE
FeaTUreS & beneFiTS
aPPliCaTionS
1. conductors are numbered – Provides fast identification of conductors. Easy to read and simplifies installation.
2. tpe conductor insulation – Oil resistant and has high dielectric tensile and mechanical properties.
3. bunch stranded soft drawn copper – Longer flex life in flexing and twisting applications.
4. specially compounded tpe jacket – Superior first line of defense against oil, UV exposure as well as most chemicals. Flame and heat resistant. Extreme all weather flexibility.
1
4
2
3
Color Code
Cond Color
3Black–1Black–2
Green
4
Black–1Black–2Black–3
Green
•AutomationEquipment •RobotPowerSupplies •MobileEquipment
•TrayCableApplications •Pumps •TemporaryandEmergencyPower
ParT no.Cable Size aWG/Cond.
ConduCTor STrandinG (PRIMARY AND GROUND)
aMPaCiTy1 nominal o.d. (IN.)
WT. (LBS.) Per 1,000'
85422STF4/0–2Conductor
with a 2 AWG Ground2090 x 30 and 665 x 30 260 1.51 2,020
85423STF4/0–3Conductor
with a 2 AWG Ground2090 x 30 and 665 x 30 260 1.80 2,872
NOTES: (1) Based on an ambient temperature of 30°C and conductor temperature of 90°C per NEC 2011, Table 3.10.15(B)(16).
Wire & Cable / Welding Cable
TPC 600 Volt Welding Cable
FeaTUreS & beneFiTS
2
4
5
1
3
Super-Trex® 600 Volt Welding Cable is designed for rugged use featuring our Extra-Flex rope lay copper conductor, 100% fabric serve and a jacket with a 25% thicker wall compared to ordinary cable. The result is a flexible weld and power cable that withstands tearing, abrasion, impact and chunking, extending the life of the cable in harsh applications. This cable is ideal for use in welding or power applications.
aPPliCaTionS
recommended minimum bend radius for Cable applications: The Minimum Bend Radius for Dynamic Applications is eight times the O.D. of the cable. Minimum Bend Radius for Static Applications is six times the O.D. of the cable.
1. extra-flex #34 awg bunch stranded rope lay copper — 2-1/2 times more stranding than conventional welding cables. Reduces copper con-ductor fatigue and breakage. Easier to work with. High impact resistance.
2. 100% fabric serve — Improves tear resistance and reduces jacket shrink-back.
3. footage indicators marked on the jacket — Easy, precise measuring reduces waste and improves productivity.
4. specially compounded, security yellow, super-trex® tse jacket rated 600 volt — Superior first-line defense against all types of industrial and environmental abuse. Flame and heat resistant. Extreme all-weather flexibility.
5. jacket is 25% thicker than ordinary cable — Withstands tearing, abrasion, impact and chunking.
*MSHA Approved**Based on an ambient temperature of 30°C and conductor temperature of 90°C per NEC 2014, Table 3.10.15(B)(17). ***These values for current carrying capacity are based on a conductor temperature of 90ºC (194ºF), an ambient temperature of 30ºC (86ºF). In actual service, the load factor may be much higher than indicated without overheating the cable as the ambient temperature will generally be substantially lower than 40ºC (Based on 100 feet length for total circuit for secondary voltages only with 4 volt drop and 60% duty cycle.
•ULListed •RoHSCompliant •TypeSC •MaxConductorTemperature90°C •UVResistant•CSA •FT-1FlameRating •600V •ExtremeUsage •MSHAApproved*(2AWGandLarger)
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
•BatteryChargerLeadWires•BusWeldingBoxesorTransformers•ElectrodeHolder&Ground•PowerSupplyApplications•PortableLighting •ConnectionstoArcWelders
ParT no.
Cable Size aWG
ConduCTor STrandinG
JaCkeT ThiCkneSS (IN)
nominal o.d. (IN)
WT. (LBS) Per 1000'
min. bend radiuS (IN)
aMPaCiTy: 600V in-line aPPliCaTionS1
86310 6 660 x 34 0.080 0.370 132 3.0 105
86311 4 1045 x 34 0.093 0.450 202 3.6 140
86312* 2 1634 x 34 0.103 0.540 305 4.4 190
86314* 1/0 2597 x 34 0.115 0.660 416 5.3 260
86315* 2/0 3300 x 34 0.115 0.700 558 5.6 300
86316* 3/0 4214 x 34 0.140 0.797 721 6.4 350
86317* 4/0 5225 x 34 0.158 0.900 906 7.2 405
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
10
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
11
TPC Ground Cable 10 aWG
TPC groUnd Cable 8 aWg
TPC groUnd Cable 6 aWg
TPC Ground Cable 2 aWG
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
Wire & Cable / grounding Cable
TPC ground Cable xx aWg e155962
TPC Ground Straps
ParT number deSCriPTion
37316 Ground Cable 6 AWG (16MM2), Green/Yellow, 600V
37312 Ground Cable 2 AWG (35MM2), Green/Yellow, 600V
37318 Ground Cable 8 AWG (10MM2), Green/Yellow, 600V
37310 Ground Cable 10AWG (6MM2) , Green/Yellow, 600V
ParT number deSCriPTion
MA124732A012 Jumper cables 12" ( #2 grd cable with 1/4" stakons)
MA124732A018 Jumper cables 18" ( #2 grd cable with 1/4" stakons)
MA124732A024 Jumper cables 24"" ( #2 grd cable with 1/4" stakons)
MA124732A030 Jumper cables 30"" ( #2 grd cable with 1/4" stakons)
•UL•AWM•1015•105ºC•600V
ParT no. deSCriPTion o.d.
3731010 AWG 105/30 Tinned Copper with .032" PVC
Green Jacket with Co-Extruded Yellow Stripe.175"
ParT no. deSCriPTion o.d.
373188 AWG 168/30 Tinned Copper with .047" PVCGreen Jacket with a Co-Extruded Yellow Stripe
.284"
ParT no. deSCriPTion o.d.
373166 AWG 266/30 Tinned Copper wuth 0.63" PVCGreen Jacket with Co-Extruded Yellow Stripe
.336"
ParT no. deSCriPTion o.d.
373122 AWG 665/30 Tinned Copper with .063" PVCGreen Jacket with Co-Extruded Yellow Stripe
.451"
NOTE: (1) Can also supply Ground Straps with Insulated Stakons
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
12
Wire & Cable / VFd Cable
NOTE: (1) Ambient temperature of 30°C, conductor temperature of 90°C, not more than three current-carrying conductors. Based on NEC 2011, Table 310.15(B)(16).
Trex-onics® low Capacitance VFd Shielded Power Cable•ULListed•CSA•TypeTC-ER–600V•OperatingTemperatureRange-40ºCto90ºC•SuitableforClassI,II,Div.2•FT-4FlameRating •CE•CSA–1,000V•RoHSCompliant •CoronaResistantto2,000V•OilResistant•SunlightResistant
1. finely stranded copper conductors — Improves flexibility and extends conductor life in dynamic applications. Conductors are alpha-numerically marked for ease of identification.
2. xlpe insulation system — High dielectric, tensile and mechanical properties.
3. flat braid drain wire
4. heavy-duty 95% coverage of tinned copper braid — Provides a shield against EM and RF noise and interference, and a low impedance path toground.Protectsequipmentandmotordamagefrom electrical noise and “stray voltage”. Designed for superior performance in moving applications.
5. specially compounded security yellow trex-onics® tpe jacket — Superior first line defense against oil, ozone, UV exposure, as well as most chemicals. Flame and heat resistant.
6. fillers — Low friction, non-wicking fillers pro-vide increased flexibility in dynamic applications.
FeaTUreS & beneFiTS
2
4
5
1
3
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no. Cable Size aWG STrandinG aMPaCiTy1 nominal
o.d. (IN)WT. (LBS) Per 1000'
drain Wire aWG
60040lC 16/4 65 x 34 18 0.563 145 18
60041lC 14/4 105 x 34 25 0.588 158 16
60042lC 12/4 165 x 34 30 0.656 247 14
60043lC 10/4 105 x 30 40 0.710 308 14
60044lC 8/4 168 x 30 55 0.926 528 14
60045lC 6/4 266 x 30 75 1.02 753 14
60046lC 4/4 413 x 30 95 1.20 1083 14
TPC’s Trex-Onics®LowCapacitanceVFDShieldedPowerCableisdesignedforsuperiorperformance.Aheavy-dutytinnedcopperbraidprotectsequipmentand motor from damage caused by electrical noise and ‘stray voltage’ and provides a shield against EM and RF noise and interference, and a low impedance path to ground. The finely stranded copper conductors extend conductor life in dynamic applications and are alpha-numerically marked for ease of identification. The oil resistant composite insulation system offers high dielectric, tensile and mechanical properties.
Color Code
Cond Color
1, 2 & 3 Black
4 Green/Yellow
aPPliCaTionS
ACVariableFrequencyDrivesaremoreprevalenttodayastheadvantagesofthistechnologyhavebecomebetterunderstood. The most common method of controlling VFD motors is the use of Pulse Width Modulation (PWM), a methodwherethefrequencyorpulsewidthofthedrivesignaliscontrolledtovarythemotorspeed.Theissuesassociated with VFD systems are high switching speeds (10 KHz and higher) which generate electrical noise, corona discharge and “stray voltages”. The generation of electrical noise, corona and “stray voltages” are poten-tiallydamagingtothemotorandequipmentifanonVFDor“driverated”cableisinstalled.Forthisreason,TPChas designed a high performance VFD cable for dynamic industrial applications that reduces the effects of electri-cal noise and corona discharge, while providing a low impedance path to ground to eliminate the potential damage caused by “stray voltages”.
Tested to over 4,000,000 cycles in cable carrier without failure!
13exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
1. finely stranded copper conductors — Improves flexibility and extends conductor life in dynamic applications. Conductors are alpha-numeri-cally marked for ease of identification.
2. brake and signal pairs — Aluminum/Mylar foil shielded pairs provide 100% shielding.
3. xlpe insulation system — High dielectric, tensile and mechanical properties.
4. flat braid drain wire
5. heavy-duty 95% coverage of tinned copper braid — Provides a shield against EM and RF noise and interference, and a low impedance path toground.Protectsequipmentandmotordamagefrom electrical noise and “stray voltage”. Designed for superior performance in moving applications.
6. specially compounded security yellow trex-onics® tpe jacket — Superior first line defense against oil, ozone, UV exposure, as well as most chemicals. Flame and heat resistant.
7. fillers — Low friction, non-wicking fillers pro-vide increased flexibility in dynamic applications.
Wire & Cable / VFd Cable
NOTE: (1) Ambient temperature of 30°C, conductor temperature of 90°C, not more than three current-carrying conductors. Based on NEC 2011, Table 310.15(B)(16).
Pairs Identified Alpha Numerically blaCk with WhiTe print
Pair #1 = 5+6 and Pair #2 = 7+8
Trex-onics® low Capacitance VFd Shielded Power Cable with brake & Signal Pairs
•ULListed•CSA•TypeTC-ER–600V•OperatingTemperatureRange-40ºCto90ºC•SuitableforClassI,II,Div.2•SunlightResistant •CE •CSA–1,000V•RoHSCompliant•CoronaResistantto2,000V •FT-4FlameRating•OilResistant
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
SinGle Pair
ParT no.
PoWer ConduCTor brake & SiGnal PairS JaCkeT ThiCkneSS
(IN)
nominal o.d. (IN)
WT. (LBS) Per 1000'
aWG/ Cond STrandinG aMPaCiTy1 oVerall
drainaWG/no.
PairS STrandinG drain WireS
60021lC 14/4 105 x 34 25 16 16/1 65 x 34 18 0.070 0.685 21560023lC 12/4 165 x 34 30 14 16/1 65 x 34 18 0.070 0.750 31060025lC 10/4 105 x 30 40 14 16/1 65 x 34 18 0.070 0.800 42060026lC 8/4 168 x 30 55 14 16/1 65 x 34 18 0.090 1.00 61760027lC 6/4 266 x 30 75 14 16/1 65 x 34 18 0.090 1.06 82560096lC 4/4 1050 x 34 95 18 14/1 105 x 30 16 0.115 1.10 1450
TWo Pair
ParT no.
PoWer ConduCTor brake & SiGnal PairS JaCkeT ThiCkneSS
(IN)
nominal o.d. (IN)
WT. (LBS) Per 1000'aWG/
Cond STrandinG aMPaCiTy1 oVerall drain
aWG/no. PairS STrandinG drain
WireS60028lC 14/4 105 x 34 25 16 16/2 65 x 34 18 0.070 0.776 28060029lC 12/4 165 x 34 30 14 16/2 65 x 34 18 0.070 0.832 37060030lC 10/4 105 x 30 40 14 16/2 65 x 34 18 0.070 0.919 50560031lC 8/4 168 x 30 55 14 16/2 65 x 34 18 0.090 1.07 80060032lC 6/4 266 x 30 75 14 16/2 65 x 34 18 0.090 1.12 1175
TPC’s Trex-Onics® Low Capacitance VFD Shielded Power Cable (with Brake and Signal Pairs) is designed for superior performance. A heavy-duty tinned copper braidprotectsequipmentandmotorfromdamagecausedbyelectricalnoiseand‘strayvoltage’andprovidesashieldagainstEMandRFnoiseandinterference,and a low impedance path to ground. The finely stranded copper conductors extend conductor life in dynamic applications and are alpha-numerically marked for ease of identification. The oil resistant composite insulation system offers high dielectric, tensile and mechanical properties.
Color Code
Cond Color
1, 2 & 3 Black
4 Green/Yellow
FeaTUreS & beneFiTS
3
5
6
2
1
4
Tested to over 4,000,000 cycles in cable carrier without failure!
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
14
Super-Trex® VFd Shielded Power Cable
•ULListed•cUL•TypeTC-ER•FT-4FlameRating•600V•CoronaResistantto2,000V•MaxConductorTemperature90°C
Designedspecificallyforvariablefrequencydrives,Super-Trex® VFD cable features a heavy-duty jacket that provides excellent protection against abra-sion, impact, oil, chemicals, heat and flame. Designed to withstand the harsh electrical environment of typical VFD systems, the cable is construct-ed with both a foil and braid shield and will withstand corona voltages up to 2,000 volts. Symmetrical ground wires are used to reduce the effect of common-mode-voltage noise. Ideal for harsh environment VFD applications where a longer lasting cable is desired.
1. finely stranded copper conductors — Improves flexibility and extends conductor life in dynamic applications.
2. tse insulation — Corona resistant insulation designed for VFD applications.
3. three insulated grounds — Reduces overall cable O.D.
4. ultra-shield construction — Combination tinned copper braid and foil shield for maximum RF and EM protection.
5. specially compounded super-trex® tse jacket — Superior protection against oil, ozone, sunlight, UV, chemicals, heat and flame. Excellent all weather flexibility.
FeaTUreS & beneFiTS
aPPliCaTionS
Color Code
• VariableFrequencyDriveSystems• ShieldedPowerCable
•Blackwithalpha-numericidentification
2
5
4
1
3
NOTE: (1) Ground sized in accordance with NEC Table 250.122 + UL1277 whichever is larger.
NOTE: (2) Ampacity in Free Air based on 90ºC conductor temperature, 30ºC ambient temperature, per NEC Table B310.15(B)(2)(3)
Ampacity in Cable Tray based on 90ºC conductor temperature, 30ºC ambient temperature, per NEC Table 310.15(B)(16)
Ampacity in Conduit based on 90ºC conductor temperature, 30ºC ambient temperature, per NEC Table B310.15(B)(2)(1)
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no.
PoWer Cond Size aWG/Cond
PoWer Cond STrandinG
Ground Size Cond/aWG1
amPaCiTieS2
nominal o.d. (IN)
WT. (LBS) Per 1000'in Free
airin Cable
Trayin
ConduiT
89103 #4 - 3 Cond 259 x 0.0127 3 x 12 AWG 114 95 89 1.19 1101
89104 #2 - 3 Cond 259 x 0.0160 3 x 10 AWG 152 130 119 1.34 1512
89106 1/0 - 3 Cond 266 x 0.0199 3 x 10 AWG 205 170 163 1.61 2174
89107 2/0 - 3 Cond 342 x 0.0199 3 x 10 AWG 237 195 186 1.70 2510
89109 4/0 - 3 Cond 532 x 0.0199 3 x 8 AWG 316 260 253 1.99 3727
89110 262 kcmil - 3 Cond 646 x 0.0199 3 x 6 AWG 362 297 285 2.21 4581
89111 373 kcmil - 3 Cond 925 x 0.0199 3 x 6 AWG 449 363 357 2.45 5968
89112 444 kcmil - 3 Cond 1110 x 0.0199 3 x 6 AWG 497 402 395 2.60 6922
89113 535 kcmil - 3 Cond 1332 x 0.0199 3 x 6 AWG 555 445 537 2.85 8246
add kord-gards® or grip-seals® to complete your order! See pages 129-137.
Wire & Cable / VFd Cable
Wire & Cable / Control Cable
CONT
ROL C
ABLE
Super-Trex® reduced diameter Control Cable (20 aWG)
TPC’s Super-Trex® Reduced Diameter Control Cable features a high strand count and cable construction designed to provide long life in dynamic flexing applications. The security yellow TPE jacket provides excellent protection against oil, and most industrial chemicals. Available in 20 AWG and various conductor counts from 5 to 65 conductors. 18 AWG, 16 AWG and 12 AWG also available.
•ULListed•CSA•CE•600V•FT-1FlameRating•RoHSCompliant•MaxConductorTemperature90°C
1. bunch stranded tinned soft drawn copper — Longer flex life in flexing and twisting applications. Easier to solder.
2. polyester tpe conductor insulation — Oil resistant and has high dielectric, tensile and mechanical properties.
3. conductors are coded with alpha-numeric identification — Provides fast iden-tification of conductors. Easy to read and simplifies installation.
4. nylon fillers — Low friction, non-wicking fill-ers provide excellent flexibility.
5. high flex tape separator around inner components — Provides easy movement of the conductor bundle for longer flex life.
6. uni-lay construction alternating bundles — Superior performance in flexing and tor-sional applications.
7. specially compounded, security yellow, super-trex® tpe jacket — Superior first-line defense against oil, ozone and UV exposure as well as most chemicals. Flame and heat resistant. Extreme all-weather flexibility.
1
3
2
6
7
4
5
FeaTUreS & beneFiTS
NOTES: (1) Maximum allowable current per conductor. Ampacities are based on an ambient temperature of 30ºC with a conductor temperature of 90ºC, not more than 3 current carrying conductors.
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no.
Cord Size aWG/Cond
ConduCTor STrandinG aMPaCiTy1 inSulaTion
ThiCkneSS (IN)JaCkeT
ThiCkneSS (IN)nominal o.d. (IN)
WT. (LBS) Per 1000'
min. bend radiuS (IN)
88305 20/5 26 x 34 9 0.010 0.050 0.275 52 2.20
88312 20/12 26 x 34 8 0.010 0.050 0.362 94 2.90
88319 20/19 26 x 34 6 0.010 0.060 0.453 148 3.60
88325 20/25 26 x 34 6 0.010 0.060 0.507 175 4.00
88333 20/33 26 x 34 4 0.010 0.065 0.541 226 4.30
88347 20/47 26 x 34 4 0.010 0.070 0.663 335 5.30
88365 20/65 26 x 34 4 0.010 0.100 0.820 515 6.60
aPPliCaTionS
• AutomaticWelders• BroachMachines• ControlCircuits• Cranes• FestoonSystems• MachineTools• CableCarrierSystems• SensingEquipment• TransferVehicles• PositioningEquipment• RemoteControlofElectricalEquipment
Not for Reeling or Forced Directional (Pulling) Applications.
Chemical resistance of Super-Trex® TPe JacketResistance to solvents and chemicals is tested by immersing cable specimens in a solution for 30 days at room temperature. Measurements of cable diameter are made before and after immersion. Resistance is rated as follows, depending upon the % of change in cable diameter:
(e) excellent–lessthan10% (F) Fair – 30% to 50%(G) Good – 10% to 30% (P) Poor – More than 50%
The first conductor in the outside layer is always Green with a Yellow Tracer. The third conductor in the outer layer is always White with a Black Tracer. All other conductors are Black with a white number. Color code repeats with black withuniquenumericidentification.
Color Code
no. oF Cond.
baSe Color
FirST TraCer
num. id.
1 Green Yellow –
2 Black – 1
3 White Black –
4 Black – 3 reaGenT TPe PVC neoPrene
Mobile Oil DTE 24 E – –
Mobile Oil DTE 26 E – –
Castor Oil E – –
Simesol E – –
Trimsol E – –
ASTM Oil 1, 2 or 3 E G G
Transformer Oil G G E
Diesel Fuel G P G
Gasoline G P G
Kerosene E E G
15exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
Wire & Cable / Control Cable
CO
NTR
OL
CAB
LE
Super-Trex® reduced diameter Control Cable (18 aWg)
TPC’s Super-Trex® Reduced Diameter Control Cable features a high strand count and cable construction designed to provide long life in dynamic flexing applications. The security yellow TPE jacket provides excellent protection against oil, and most industrial chemicals. Available in 18 AWG and various conductor counts from 5 to 65 conductors. 20 AWG, 16 AWG and 12 AWG also available.
1. bunch stranded tinned soft drawn copper — Longer flex life in flexing and twisting applications. Easier to solder.
2. polyester tpe conductor insulation — Oil resistant and has high dielectric, tensile and mechanical properties.
3. conductors are coded with alpha-numeric identification — Provides fast iden-tification of conductors. Easy to read and simplifies installation.
4. nylon fillers — Low friction, non-wicking fill-ers provide excellent flexibility.
5. high flex tape separator around inner components — Provides easy movement of the conductor bundle for longer flex life.
6. uni-lay construction alternating bundles — Superior performance in flexing and tor-sional applications.
7. specially compounded, security yellow, super-trex® tpe jacket — Superior first-line defense against oil, ozone and UV exposure as well as most chemicals. Flame and heat resistant. Extreme all-weather flexibility.
1
3
2
6
7
4
5
FeaTUreS & beneFiTS
NOTES: (1) Based on an ambient temperature of 30°C and conductor temperature of 90°C per NEC 2014, Table 3.10.15(B)(16).
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no.
Cord Size aWG/Cond
ConduCTor STrandinG aMPaCiTy1 inSulaTion
ThiCkneSS (IN)JaCkeT
ThiCkneSS (IN)nominal o.d. (IN)
WT. (LBS) Per 1000'
min. bend radiuS (IN)
88905 18/5 41 x 34 11 0.010 0.060 0.321 68 2.57
88912 18/12 41 x 34 7 0.010 0.070 0.444 137 3.55
88919 18/19 41 x 34 7 0.010 0.075 0.538 208 4.30
88925 18/25 41 x 34 6 0.010 0.080 0.613 273 4.90
88933 18/33 41 x 34 5 0.010 0.080 0.645 318 5.16
88949 18/49 41 x 34 5 0.010 0.090 0.787 473 6.29
88965 18/65 41 x 34 5 0.010 0.100 0.892 614 7.14
aPPliCaTionS
• AutomaticWelders• BroachMachines• ControlCircuits• Cranes• FestoonSystems• MachineTools• CableCarrierSystems• SensingEquipment• TransferVehicles• PositioningEquipment• RemoteControlofElectricalEquipment
Not for Reeling or Forced Directional (Pulling) Applications.
Chemical resistance of Super-Trex® TPe JacketResistance to solvents and chemicals is tested by immersing cable specimens in a solution for 30 days at room temperature. Measurements of cable diameter are made before and after immersion. Resistance is rated as follows, depending upon the % of change in cable diameter:
(e) excellent–lessthan10% (F) Fair – 30% to 50%(G) Good – 10% to 30% (P) Poor – More than 50%
The first conductor in the outside layer is always Green with a Yellow Tracer. The third conductor in the outer layer is always White with a Black Tracer. All other conductors are Black with a white number. Color code repeats with black withuniquenumericidentification.
Color Code
no. oF Cond.
baSe Color
FirST TraCer
num. id.
1 Green Yellow –
2 Black – 1
3 White Black –
4 Black – 3 reaGenT TPe PVC neoPrene
Mobile Oil DTE 24 E – –
Mobile Oil DTE 26 E – –
Castor Oil E – –
Simesol E – –
Trimsol E – –
ASTM Oil 1, 2 or 3 E G G
Transformer Oil G G E
Diesel Fuel G P G
Gasoline G P G
Kerosene E E G
•ULListed•TypeTC-ER–600V•TypeWTTC–1,000V•SuitableforClassI,II,Div.2•CE •FT-4FlameRating•RoHSCompliant•MaxConductorTemperature90°C
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
16
CO
NTR
OL
CAB
LE
Wire & Cable / Control Cable
FeaTUreS & beneFiTS
1. bunch stranded tinned soft drawn copper – Longer flex life in flexing and twisting appli-cations. Easier to solder.
2. conductors are coded with alpha-numeric identification – Provides fast identifi-cation of conductors. Easy to read and simplifies instal-lation. Red conductors for AC applications and BLUE for DC applications.
3. polyester tpe conductor insulation – Oil resistant and has high dielectric, tensile and mechanical properties.
4. nylon fillers – Low friction, non wicking fillers provide excellent flexibility.
5. uni-lay construction alternating bundles – Superior performance in flexing and tor-sional applications.
6. high flex tape separator around inner components – Provides easy movement of the conductor bundle for longer flex life.
7. specially compounded, security yellow, super-trex® tpe jacket – Superior first-line defense against oil, ozone and UV exposure as well as most chemicals. Flame and heat resistant. Extreme all-weather flexibility.
2
4
6
1
3
5
7
•AutomaticWelders•BroachMachines•ControlCircuits•Cranes
•FestoonSystems•MachineTools•PowerTrackSystems•SensingEquipment
•TransferVehicles•PositioningEquipment•RemoteControlofElectricalEquipment
aPPliCaTionS Not for Reeling or Forced Directional (Pulling) Applications.
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no. (ConduCTor) Cable Size aWG
ConduCTor STrandinG aMPaCiTy1 inSulaTion
ThiCkneSS (IN)
JaCkeT ThiCkneSS
(IN)
nominal o.d. (IN)
WT. (lbS)Per 1000'
min. bend radiuS
(IN)STd. red blue
– 88505r 88505b 16/5 65 x 34 14 0.010 0.060 0.358 88 2.86
– – 88507b 16/7 65 x 34 13 0.010 0.080 0.453 150 3.62
– – 88508b 16/8 65 x 34 13 0.010 0.080 0.456 172 3.70
88512 88512r 88512b 16/12 65 x 34 9 0.010 0.070 0.510 191 3.96
88516 – – 16/16 65 x 34 9 0.010 0.070 0.555 239 4.40
– 88519r 88519b 16/19 65 x 34 9 0.010 0.075 0.596 281 4.76
88522 – – 16/22 65 x 34 8 0.010 0.080 0.650 327 5.20
88525 88525r 88525b 16/25 65 x 34 8 0.010 0.080 0.700 376 5.60
88531 – – 16/31 65 x 34 7 0.010 0.080 0.745 425 5.80
– 88533r 88533b 16/33 65 x 34 7 0.010 0.080 0.745 448 5.96
88541 – – 16/41 65 x 34 6 0.010 0.100 0.850 608 6.96
– 88547r 88547b 16/47 65 x 34 6 0.010 0.085 0.850 653 7.12
88549 – – 16/49 65 x 34 6 0.010 0.925 0.925 714 7.20
88560 – – 16/60 65 x 34 6 0.010 0.975 0.975 783 7.80
NOTES: (1) Based on an ambient temperature of 30°C and conductor temperature of 90°C per NEC 2014, Table 3.10.15(B)(16).
Super-Trex® reduced diameter Control Cable (16 aWg)•ULListed•TypeTC-ER–600V•TypeWTTC–1,000V•SuitableforClassI,II,Div.2•CE •FT-4FlameRating•RoHSCompliant•MaxConductorTemperature90°C
recommended minimum bend radius for Cable applications
The Minimum Bend Radius for Dynamic Applications is 8 times the O.D. of the cable. Minimum Bend Radius for Static Applications is 6 times the O.D. of the cable.
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
17
5
2
3
1
4
Trex-onics® industrial ethernet Patch/Work area CaT7a Cable
1. stranded bare copper conductors — Improve flexibility and offer longer flex life.
2. polyolefin (po) insulation system — Provides excellent dielectric and insulation properties.
3. ultra-shield® configuration and aluminum/polyester foil shield construction — Placed around each pair reduces radiated and conducted electrical noise interference.
4. braided shield
5. halogen-free and flame retardant polyurethane jacket — Provides protection from environmental abuse and offers resistance to UV light, cutting, abrasion, oil and chemicals.
6. combination of cellular insulation and shielded pairs — Provides superior elec-trical performance to meet CAT7A and Ethernet/IP requirements.
7. backward compatibility — Fully inter-changeable with CAT5E, CAT6 and CAT6A cables.
FeaTUreS & beneFiTS
5
2
3
1
4
The Trex-Onics® Industrial Ethernet CAT7A cable’s classic design starts with finely stranded conductors that provide high flexibility and a longer flex-life. The Ultra-Shield® configuration and shield construction placed around each pair reduces radiated and conducted electrical noise interference. Our jacket is a halogen-free, flame retardant material that provides protection from environmental abuse and offers resistance to cutting, abrasion, oil and chemicals.
Color Code (CAT7A & CAT6A)
Pair no. Color Pair no. Color
1 Blue - White 3 Green - White
2 Orange - White 4 Brown - White
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no. Cond Size nom. inSul. Wall (IN)
oVerall Shield
JaCkeT Wall (IN)
nominal o.d. (IN)
WT. (LBS) Per 1000'
60067 (CAT7A) 26 AWG (7" x 0.0063") 0.010 YES 0.039 0.260 51
60062 (CAT6A) 26 AWG (7" x 0.0063") 0.010 NO 0.039 0.275 29
•ANSITIA/EIA568-B •IEC60332-1 •OperatingTemperatureRange-40°Cto70°C •FrequencyRangeupto1000MHz •AbrasionResistant•ISO/IEC11801 •IEC61156-6 •RoHSCompliant2002/95/EC •Halogen-FreeFlameRetardant •600V*
aPPliCaTionS (CAT7A & CAT6A)
• DataProcessing&InformationSystems • HighBandwidthDigitalApplications • HighDataRateApplications •PatchCord/WorkArea
NOTE: *Installation cable voltage rating is 300/600 V. This cable is not intended to be used for main power supply applications.
Trex-onics® industrial ethernet Patch/Work area CaT6a Cable
•IEC60332-1•ISO/IEC11801•300V•OperatingTemperatureRange-30ºCto65ºC•IEC61156-6•RoHSCompliant•Halogen-FreeFlameRetardant•FrequencyRangeupto500MHz
Flex TeSTed
Tested to over
6,000,000
cycles without
electrical failure!
This Industrial Ethernet CAT6A cable is built for performance. The halogen-free and flame retardant jacket provides protection from environmental abuse and offers resistance to UV light, cutting, abrasion, oil and chemicals. Our combination of cellular insulation and shielded pairs provides superiorperformancetomeetorexceedCAT6AandEthernet/IPrequirements.
1. stranded bare copper conductors — Improve flexibility and offer longer flex life.
2. cellular polyolefin insulation — Provides excellent dielectric and insulation properties.
3. aluminum/polyester foil shield — Around each pair reduces electrical noise interference.
4. drain wire
5. halogen-free and flame retardant
polyurethane jacket — Provides protection from environmental abuse and offers resistance to UV light, cutting, abrasion, oil and chemicals.
6. combination of cellular insulation and shielded pairs — Provides superior electrical performance to meet CAT6A and Ethernet/IP requirements.
7. backward compatibility — Fully inter-changeable with CAT5E, CAT6 and CAT6A cables.
FeaTUreS & beneFiTS
Flex TeSTed
Tested to over
6,500,000
cycles without
electrical failure!
Wire & Cable / buS Cable
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
18
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no. ConduCTor Size nom. inSul. Wall (IN)
oVerall Shield
JaCkeT Wall (IN)
nominal o.d. (IN)
WT. (LBS) Per 1000'
60066 22 AWG (7 x 0.008") 0.036 YES 0.031 0.385 78
Trex-onics® industrial ethernet Shielded Horizontal CaT6a Cable
FeaTUreS & beneFiTS
5
2
3
1
4
The Trex-Onics® Industrial Ethernet CAT6A cable’s classic design starts with finely stranded conductors that provide high flexibility and a longer flex-life. The Ultra-Shield® configuration and shield construction placed around each pair reduces radiated and conducted electrical noise interference. Our jacket is a halogen-free, flame retardant material that provides protection from environmental abuse and offers resistance to cutting, abrasion, oil and chemicals.
•ULRecognized•TIA/EIA-568-C-2 •OperatingTemperatureRange-30°Cto80°C•FrequencyRangeupto500MHz •UVResistant•FT-1FlameRating•ANSITIA/EIA568-B•RoHSCompliant2002/95/EC •Halogen-FreeFlameRetardant•AWM
1. stranded tinned copper conductors — Improve flexibility and offer longer flex life.
2. polyolefin (po) insulation system — Provides excellent dielectric and insulation properties.
3. ultra-shield® configuration braid and aluminum/polyester foil shield construction — Placed around each pair reduces radiated and conducted electrical noise interference.
4. braided shield with drain wire
5. halogen-free and flame retardant polyurethane jacket — Provides protection from environmental abuse and offers resistance to UV light, cutting, abrasion, oil and chemicals.
6. combination of cellular insulation and shielded pairs — Provides superior elec-trical performance to meet CAT7A and Ethernet/IP requirements.
7. backward compatibility — Fully inter-changeable with CAT5E and CAT6 cables.
SPeCiFiCaTionS
eleCTriCal SPeCiFiCaTionS
Freq. (MHz)
aTTenuaTion (dB/100m20ºC)
PS nexT loSS (dB)
nexT loSS (dB)
rl (dB)
PS anexT (dB)
PS elFexT (dB)
elFexT (dB)
1 2.1 105.0 108.0 22.0 68.0 95.0 98.0
4 3.9 98.0 101.0 25.0 68.0 90.0 93.0
10 6.1 95.0 98.0 28.0 68.0 86.0 89.0
20 8.6 90.0 93.0 28.0 68.0 80.0 83.0
30 10.7 85.0 88.0 27.0 68.0 76.0 79.0
100 19.8 80.0 83.0 24.0 68.0 66.0 69.0
150 24.5 78.0 81.0 22.0 65.0 63.0 66.0
200 28.5 78.0 81.0 21.0 65.0 60.0 63.0
250 32.0 75.0 78.0 20.0 62.0 58.0 61.0
300 35.5 75.0 78.0 19.0 62.0 52.0 55.0
400 42.2 70.0 73.0 19.0 62.0 49.0 52.0
500 46.5 70.0 73.0 19.0 62.0 47.0 50.0
• FrequencyRange:500 mhz• InputImpedance:100 Ω ± 15 Ω• DCResistance:15.9 Ω/1000 ft• DCRUnbalanced:2% Max• CapacitanceUnbalanced:0.36pF/ft Max
• Delay(Skew):20 nsec/100 m Max• VelocityofPropagation:78% nominal• TemperatureRange:- 30ºC to +80ºC• Min.InsulationResistance: 4 g Ω • Km• Min.BendRadius:3 inches
Color Code
Pair no. Color
1 Blue - White
2 Orange - White
3 Green - White
4 Brown - White
aPPliCaTionS
• DataProcessing& Information Systems
• HighBandwidthDigital Applications
• HighDataRateApplications
• Horizontal
• 100m/328ft.runlength
Flex TeSTed
Tested to over
6,500,000
cycles without
electrical failure!
NOTE: *Installation cable voltage rating is 300/600 V. This cable is not intended to be used for main power supply applications.
Wire & Cable / buS Cable
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
19
m12 d-coded micro connectors with cat5e / 2-pair cable•ULRecognized•cUL
1
2
3
Trex-onics® industrial ethernet CaT5e / 2-Pair Cable
1. stranded copper conductors — Provide longer flex life and improves cable flexibility.
2. insulation — High density compounds are used for the conductor insulation to provide excellent dielectricpropertiesthatmeetCAT5Erequirements.
3. unique jacket design — Product is constructed with an inner binder and outer jacket. The inner binder provides protection to the conductor bundle from impact and keeps the lay lengths of the cable intact to ensure signal integrity. The outer Trex-Onics® jacket provides protection from environmental abuse and offers excellent defense against cutting, abrasion, oil and chemicals.
4. unique conductor lay lengths — Conductorpairsarecabledwithuniquelaylengthsto ensure signal integrity.
FeaTUreS & beneFiTS
ThisULapprovedIndustrialEthernetCAT5E/2-paircableissuitableforuseinEthernetsystemswhereamorerobustcableisrequiredandisdesigned specifically for industrial applications where flexing and repetitive motion exists.
•ULRecognizedintheU.S.andCanada•TIA/EIA568-C-2*•AWM20233•RoHSCompliant•300V•OperatingTemperatureRange-40ºCto80ºC
Color CodePair no. Color
1 Blue - White/Blue2 Orange - White/Orange
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no. Cable aWG
STrand aWG
no. oF PairS
CenTer SPine Shield TaPe
SeParaTorFiniSHed o.d. (IN)
WT. (LBS) Per 1000'
600652 24 AWG 19/36 2 NONE NO YES 0.208 29
ParT no. deSCriPTion
3340120 Male Straight, M12 D-Coded Micro Connector
3340121 Female Straight, M12 D-Coded Micro Connector
aPPliCaTionS
• PLCandDCSAutomationNetworks• DeviceandFieldLevelNetworking• ProfiNet• IndustrialEthernetNetworks
eleCTriCal SPeCiFiCaTionS
FreqUenCy (MHz)
aTTenuaTion (dB/100m)
nexT (dB)
1 2.0 684 4.1 598 5.8 5510 6.5 5316 8.2 5020 9.3 4925 10.4 47
31.25 11.7 4662.50 17.0 41100 22.0 38155 28.1 35200 32.4 34310 41.8 31350 44.9 30
SPeCiFiCaTionS
• DCResistance:9.38 Ω/100m (28.6 Ω/kft) Max.• DCRUnbalanced:5% Max• MutualCapacitance:12 pFm/ft • CharacteristicImpedance:100 Ω ± 15 Ω (1-100 MHz)• InputImpedance:100 Ω ± 15 Ω (1-100 MHz)• VelocityofPropagation:71% nominal
Standard Wiring1-White/Blue2-White/Orange3-Orange4-Blue
*Telecommunications Industry Association / Electronic Industries Alliance
Call us to build your assembly today! TPC Wire & Cable Corp., your source for connector assemblies.
male Straight
Female Straight
Wire & Cable / buS Cable
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
20
Cord SetS & ConneCtor aSSeMblieS / MiCro quiCk-ConneCtS™
dC Micro M12 Single Key quick-Connects™
•ULListed•cULListed•RoHSCompliant•IP68•IP69K•300V•4Amps•SingleKeyDesign
1. cordsets made with trex-onics® control cable — Designed for high cycle, constant motion applications. Provides excellent defense against impact, cutting, abrasion, oil and chemicals.
2. specially compounded polyurethane insert — Compatible with all industry standards for both AC and DC applications. Provides a superior seal against fluid and dust penetration.
3. solid brass contact pins are nickel coated and gold plated – Resists corrosion. Ensures electrical integrity in both AC & DC low voltage applications.
4. anodiZed aluminum knurled coupling nut — Protects the insert, pins and sleeves from impact and abuse. Easy to grip.
5. fluoroelastomer 0-ring — Seals out oil, chemicals and other contaminants. Provides a positive seal on mated components
6. all polyurethane design, head and cord — Ensures a 100% bond between head and cord. Eliminates glues and bonding materials that break down and leak over time, resulting in loss of signal and continuity.
FeaTUreS & beneFiTS
aPPliCaTionS
• BarCodeReaders• ComputerInterfaces• DigitalRemoteControls• EncodersorResolvers• HeatPressureandFlowMeters
• Instrumentation• I/O(input/output)Devices• LoadCellMonitors• ProgrammableControllers• ProgrammableLimitSwitches
• ProximitySwitches• Robotics• ServoMotors• SensorsandRelays• SolenoidValves
• Tachometers• Telecommunications• Torque-ToolMonitoringEquipment• X-RayMonitors• VariableSpeedMotors
STraigHT FeMale 8 Pin dC PlUg
STraigHT FeMale dC PlUg 90º FeMale dC PlUg
90º Male dC PlUg
1
7
2
6
8 3
54
178
6
2345
Keyway1.875" 0.58"
1 Not Used2 Not Used3 Brown4 Blue5 Not Used
1 Brown2 Not Used3 Blue4 Black5 Not Used
1 Brown2 White3 Blue4 Black5 Not Used
1 Brown2 White3 Blue4 Black5 Gray
1 White2 Brown3 Green4 Yellow5 Gray6 Pink7 Blue8 Red
2 Pole 3 Pole 4 Pole 5 Pole 8 Pole
1
7
2
6
8 3
54
FaCe VieW oF FeMale
STraiGhT male dC PluG
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
21
Cord SetS & ConneCtor aSSeMblieS / MiCro quiCk-ConneCtS™
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
dC — STraigHT FeMale PlUg
ParT no.FeeT meTerS
2 Pole 3 Pole 4 Pole 5 Pole 8 Pole 8 Pole (SHIELDED)
64203 64303 64403 64503 CF18C60M001 CF18C61M001 3.27 1
64206 64306 64406 64506 CF18C60M002 CF18C61M002 6.56 2
64212 64312 64412 64512 CF18C60M004 CF18C61M004 13.08 4
64220 64320 64420 64520 CF18C60M006 CF18C61M006 19.67 6
dC — 90° FeMale PlUg
ParT no.FeeT meTerS
2 Pole 3 Pole 4 Pole 5 Pole 8 Pole 8 Pole (SHIELDED)
69203 69303 69403 69503 CF18d60M001 CF18d61M001 3.27 1
69206 69306 69406 69506 CF18d60M002 CF18d61M002 6.56 2
69212 69312 69412 69512 CF18d60M004 CF18d61M004 13.08 4
69220 69320 69420 69520 CF18d60M006 CF18d61M006 19.67 6
dC — Male/FeMale exTenSion SeT
ParT no.FeeT meTerS
2 Pole 3 Pole 4 Pole 5 Pole 8 Pole 8 Pole (SHIELDED)
CF22e16a020 CF23e17a020 63422 CF25e19a020 CF28e60a020 CF28e61a020 1.64 0.5
63223 63323 63423 63523 CF28e60M001 CF28e61M001 3.27 1
63226 63326 63426 63526 CF28e60M002 CF28e61M002 6.56 2
CF22e16M003 CF23e17M003 63427 CF25e19M003 CF28e60M003 CF28e61M003 9.84 3
63232 63332 63432 63532 CF28e60M004 CF28e61M004 13.08 4
CF22e16M005 CF23e17M005 63433 CF25e19M005 CF28e60M005 CF28e61M005 16.00 5
63240 63340 63440 63540 CF28e60M006 CF28e61M006 19.67 6
Male 90° / FeMale STraigHT exTenSion SeT
ParT no. 4 Pole FeeT meTerS
63923 3.27 1
63926 6.56 2
63932 13.08 4
STraigHT Male / 90° FeMale exTenSion SeT
ParT no. 4 Pole FeeT meTerS
69422 1.64 0.5
69423 3.27 1
69426 6.56 2
69427 9.84 3
69432 13.08 4
69440 19.67 6
dC — MiCro qUiCK-ConneCT™ Cable
dC ParT no. Size STrandinG nominal o.d. WT. (LBS.) Per 1000'
62022 18/2 (Unshielded) 41/34 0.220 31.0
62023 18/3 (Unshielded) 41/34 0.220 35.1
62024 18/4 (Unshielded) 41/34 0.240 41.5
62025 18/5 (Unshielded) 41/34 0.255 50.3
60018 22/8 (Unshielded) 7/30 0.245 32.6
60019 22/8 (Shielded) 7/30 0.280 59.6
dC Micro M12 Single Key quick-Connects™ (Continued)
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
22
dC 18 Micro M12 Single Key quick-Connects™ receptacles
•RoHSCompliant
aPPliCaTionS
• BarCodeReaders• ComputerInterfaces• DigitalRemoteControls• EncodersorResolvers• HeatPressureandFlowMeters
• Instrumentation• I/O(input/output)Devices• LoadCellMonitors• ProgrammableControllers• ProgrammableLimitSwitches
• ProximitySwitches• Robotics• ServoMotors• SensorsandRelays• SolenoidValves
• Tachometers• Telecommunications• Torque-ToolMonitoringEquipment• X-RayMonitors• VariableSpeedMotors
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
FeMale reCePTaCle — baCk mounTParT no. ParT no. deSCriPTion PiGTail lenGTh
63308 rF13q24F004 3P Female Back Mount 48"
63408 rF14q25F004 4P Female Back Mount 48"
63508 rF15q26F004 5P Female Back Mount 48"
FeMale reCePTaCle — Panel mounTParT no. ParT no. deSCriPTion PiGTail lenGTh
63202 — 2P Female Panel Mount 48"
63302 rF13T24F004 3P Female Panel Mount 48"
63402 rF14T25F004 4P Female Panel Mount 48"
63502 rF15T26F004 5P Female Panel Mount 48"
— rF18T60M001 8P F Panel Mt. (Unshielded) 1 m
— rF18T61M001 8P F Panel Mt. (Shielded) 1 m
o-ring & locknut included
o-ring & locknut included
Cord SetS & ConneCtor aSSeMblieS / MiCro quiCk-ConneCtS™
dC miCro CloSure CaPS WiTh ChainParT no. deSCriPTion
64801 Closure Cap with 6" Chain for Male Plug & Receptacles with External Thread
64801S Stainless Steel Closure Cap with 6" Chain for Male Plug & Receptacle with External Thread
64802 Closure Cap with 6" Chain for Female Plug & Receptacles with Internal Thread
64802S Stainless Steel Closure Cap with 6" Chain for Female Plug & Receptacle with Internal Thread
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
23
dC 18 Micro M12 Single Key quick-Connects™ receptacles (Continued)
Cord SetS & ConneCtor aSSeMblieS / MiCro quiCk-ConneCtS™
male reCePTaCle — Panel mounTParT no. ParT no. deSCriPTion PiGTail lenGTh
64202 — 2P Male Panel Mount 12"
64302 rF13r24F001 3P Male Panel Mount 12"
64402 rF14r25F001 4P Male Panel Mount 12"
64502 rF15r26F001 5P Male Panel Mount 12"
— rF13r24F004 3P Male Panel Mount 48"
— rF14r25F004 4P Male Panel Mount 48"
— rF15r26F004 5P Male Panel Mount 48"
— rF18r60M001 8P F Panel Mt. (Unshielded) 1 m
— rF18r61M004 8P F Panel Mt. (Shielded) 1 m
o-ring & locknut included
0.825"0.320"
1/4"–18 NPT(17/32" or 9/16" DRILL SIZE) 12 mm x 1.0 Thread
0.400"12" leads
0.785"
0.750"
male reCePTaCle — SWiTCH body MoUnTParT no. ParT no. deSCriPTion PiGTail lenGTh
64207 — 2P Male Switch Body 12"
64307 rF13S24F001 3P Male Switch Body 12"
64407 rF14S25F001 4P Male Switch Body 12"
64507 rF15S26F001 5P Male Switch Body 12"
— rF13S24F004 3P Male Switch Body 48"
— rF14S25F004 4P Male Switch Body 48"
— rF15S26F004 5P Male Switch Body 48"
FaCe VieW oF FeMale PlUgS
o-ring & locknut included
1.062".3312" leads
1/2"–14 NPT Thread(7/8" DRILL SIZE)
12 mm x 1.0 Thread
1.140"
0.54"
1 Not Used2 Not Used3 Brown4 Blue5 Not Used
1 Brown2 Not Used3 Blue4 Black5 Not Used
1 Brown2 White3 Blue4 Black5 Not Used
1 Brown2 White3 Blue4 Black5 Gray
1 White2 Brown3 Green4 Yellow5 Gray6 Pink7 Blue8 Red
2 Pole 3 Pole 4 Pole 5 Pole 8 Pole
1
7
2
6
8 3
54
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
24
Cord SetS & ConneCtor aSSeMblieS / MiCro quiCk-ConneCtS™
Field installable aC & dC Micro Connectors
FieldInstallableACandDCMircoConnectorsareIP67ratedtoprovidealiquidtightsealtoprotecttheconnectionfromdustandwatercontamination.Theseconnectors are designed to fit a wide range of sizes and are easily installed using only a screw driver to secure the connection. The nylon body is impact and crushresistant.Idealforaquickon-siterepair.
•IP67Rated•RoHSCompliant•DCSingleKey(4–5Pole)•ACDualKey(3Pole)•CurrentRating:3AmpsDC&4AmpsAC
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
dC — Field inSTallable MiCroS
ParT no. deSCriPTion Cord o.d. ranGe (IN)
30700 4 Pole Male Straight DC 0.158–0.236
30600 5 Pole Male Straight DC 0.236–0.315
30800 8 Pole Male Straight DC 0.236–0.315
30400 4 Pole Female Straight DC 0.158–0.236
30500 5 Pole Female Straight DC 0.236–0.315
30900 8 Pole Female Straight DC 0.236–0.315
39700 4PoleMale90ºDC 0.158–0.236
39600 5PoleMale90ºDC 0.236–0.315
39400 4PoleFemale90ºDC 0.158–0.236
39500 5PoleFemale90ºDC 0.236–0.315
aC — Field inSTallable MiCroS
ParT no. deSCriPTion Cord o.d. ranGe (IN)
30801 3 Pole Male Straight AC 0.158–0.236
30301 3 Pole Female Straight AC 0.158–0.236
39801 3PoleMale90ºAC 0.158–0.236
39301 3PoleFemale90ºAC 0.158–0.236
55mm REF.
20mm19.6mm
40.8mm REF.
20.5mm
55mm REF.
19.6mm
19.6mm
34.5mm REF.
20.5mm
CoUPling THread – aC 1/2" UnF – dC M12 x 1
1. selection — AC and DC, straight and 90ºconnectors,bothmaleandfemale.
2. sealing grommet — Provides a liquidtightsealtoprotecttheconnectionfromcontamination.
3. cable selection — Designed to fit a widerangeofcordsizesfrom0.158"–0.315".
4. screw lock system — Provides secure connection using only a screw driver.
5. field installable design — Easy toinstallforquickon-siterepairs.
6. nylon body and insert — Impact and crush resistant.
FeaTUreS & beneFiTS
male STraiGhT
FeMale STraigHT
Male 90° FeMale 90°
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
25
Trex-onics® devicenet™ Flex-net Cable Mini assemblies
Flex-Net Cable Mini Assemblies take all the advantages of our Flex-Net Cable (a heavy-duty jacket and Ultra-Shield construction) and add a molded mini head which is permanently bonded to the cable providing a superior water and chemical resistant seal. Our micros have contact pins that are gold plating over nickel to ensure electronic and electrical integrity over repeated insertions and extractions.
1. heavy-duty gray trex-onics® jacket — Excellent defense against cutting, abrasion, oil and chemicals.
2. ultra-shield construction, a heavy-duty combination of copper braid and an aluminum/mylar shield — 100% shielding provides protection from EM and RF inter-ference. Finely stranded braid provides superior mechanical strength.
3. polyurethane molded plug body — Permanently bonded to cable providing a superior water and chemical resistant seal.
4. extra long grounding pin — Ensures first-in, last-out con-tact for safety.
5. unique stainless steel reinforced female pin design — Prevents pin deformation resulting in loss of signal and electrical continuity. Superior performance in high vibration and continuous motion environments. Probe proof.
6. contact pins and sleeves — Gold plating over nickel insures electronic and electrical integrity over repeated insertions and extractions.
7. flex-net thin cable — For flexing and torsional applications. Meets ODVA™electricalperformancerequirements.
8. common axis design
• TheelectricalrequirementoftheDeviceNetCableshallbein accordance with those identified by the ODVA (Open DeviceNet Association) for the Thin Cable.
• CapacitancebetweenConductors–12pF/ft.at1MHz(nominal).
• Impedance–120Ohms+/-12Ohms.
This product is intended for use in the DeviceNet™BusSysteminapplicationsrequiring“Mini”styleMale,FemaleorMale/Femaleconnectors.Applications for this product are industrial in nature and will be connected to devices such as proximity, photo electric and limit switches. This cable may be exposed to oils, coolants, water, chemicals and grease. Temperature exposures for the assemblies are not to exceed 80˚C (176˚F) and not below -25˚C (-13˚F).
• Thincabletorsionalperformanceexceeded1,000,000cycleswithabendradiusof10x.
• Capacitancebetweenoneconductorandotherconductor connectedtoshield–24pF/ft.at1MHz(nominal).
• PropagationDelay–1.36nSec/ft.(maximum).
FeaTUreS & beneFiTS
eleCTroniC SPeCiFiCaTionS
role oF ProdUCT
PHySiCal TeSTing SPeCiFiCaTionS
1 243
•RoHSCompliant•ODVAConformity
Cord SetS & ConneCtor aSSeMblieS / Mini aSSeMblieS™
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
26
Cord SetS & ConneCtor aSSeMblieS / Mini aSSeMblieS™
Trex-onics® devicenet™ Flex-net Cable Mini assemblies (Continued)
2.520
Coupling Ring 7/8-16 UN 2A thread
2.383
Coupling Ring 7/8-16 UN 2A thread
Trex-Onics® Flex-Net Cable Assemblies are designed and manufactured in accordance
with your length requirements. Please contact our Engineered Products Department to
review your specific needs.
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ProdUCT SPeCiFiCaTionS
Mini deViCeneT™ ConneCTor Cord SeTS – ThiCk
STandard ProduCT
(#60001)
HigH PerForManCe ProduCT
(Thick Cable #60008)m FT deSCriPTion
60933 CP25e44m001 1.0 3.3 Male/Female
60936 CP25e44m002 2.0 6.6 Male/Female
60939 CP25e44m003 3.0 9.8 Male/Female
60932 CP25e44m004 4.0 13.1 Male/Female
60930 CP25e44M006 6.0 19.7 Male/Female
60934 CP25e44m012 12.0 39.3 Male/Female
60937 CP25e44M018 18.0 59.0 Male/Female
60938 CP25e44m024 24.0 78.7 Male/Female
60931 CP25e44m030 30.0 98.4 Male/Female
60503 CP15a44m001 1.0 3.3 Male
60506 CP15a44m002 2.0 6.6 Male
60509 CP15a44m003 3.0 9.8 Male
60512 CP15a44m004 4.0 13.1 Male
60520 CP15a44M006 6.0 19.7 Male
60540 CP15a44m012 12.0 39.3 Male
60550 CP15a44m015 15.0 49.2 Male
60560 CP15a44M018 18.0 59.0 Male
60580 CP15a44m024 24.0 78.7 Male
60510 CP15a44m030 30.0 98.4 Male
60303 CP15C44m001 1.0 3.3 Female
60306 CP15C44m002 2.0 6.6 Female
60309 CP15C44m003 3.0 9.8 Female
60312 CP15C44m004 4.0 13.1 Female
60320 CP15C44M006 6.0 19.7 Female
60340 CP15C44m012 12.0 39.3 Female
60350 CP15C44M018 18.0 59.0 Female
60360 CP15C44m024 24.0 78.7 Female
60310 CP15C44m030 30.0 98.4 Female
Mini deViCeneT™ ConneCTor Cord SeTS – Thin
HigH PerForManCe ProduCT
(Thin Cable #60007)m FT deSCriPTion
CP25e43m001 1.0 3.3 Male/Female
CP25e43m002 2.0 6.6 Male/Female
CP25e43m003 3.0 9.8 Male/Female
CP25e43m004 4.0 13.1 Male/Female
CP25e43M006 6.0 19.7 Male/Female
CP25e43m012 12.0 39.4 Male/Female
CP25e43m015 15.0 50.0 Male/Female
CP25e43M018 18.0 59.0 Male/Female
CP25e43m024 24.0 78.7 Male/Female
CP25e43m030 30.0 98.4 Male/Female
CP15a43m001 1.0 3.3 Male
CP15a43m002 2.0 6.6 Male
CP15a43m003 3.0 9.8 Male
CP15a43m004 4.0 13.1 Male
CP15a43M006 6.0 19.7 Male
CP15a43m012 12.0 39.4 Male
CP15a43m015 15.0 49.2 Male
CP15a43M018 18.0 59.0 Male
CP15a43m024 24.0 78.7 Male
CP15a43m030 30.0 98.4 Male
CP15C43m001 1.0 3.3 Female
CP15C43m002 2.0 6.6 Female
CP15C43m003 3.0 9.8 Female
CP15C43m004 4.0 13.1 Female
CP15C43M006 6.0 19.7 Female
CP15C43m012 12.0 39.4 Female
CP15C43m015 15.0 49.2 Female
CP15C43M018 18.0 59.0 Female
CP15C43m024 24.0 78.7 Female
CP15C43m030 30.0 98.4 Female
STraiGhT male PluG STraigHT FeMale PlUg
5 Pole1. Drain2. Red (V+)3. Black (V-)4. White (Can-H)5. Blue (Can-L)
FaCe VieW oF FeMale Mini
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
27
12345
12345
1 2 3 4 5
MALEFEMALEFEMALE3
54
12
3
54
12
3
12
54
12345
12345
1 2 3 4 5
MALEFEMALEFEMALE3
54
12
3
54
12
3
12
54
FEM MINI
MALE MINI
1.00” 25.4 mm
FEM MINI
MALE MINI
FEM MINI
1.00” 25.4 mm
1.00” 25.4 mm
3.37” 85.72 mm
2.43” 61.91 mm
12345
12345
1 2 3 4 5
MALEFEMALEFEMALE3
54
12
3
54
12
3
12
54
12345
12345
1 2 3 4 5
MALEFEMALEFEMALE3
54
12
3
54
12
3
12
54
FEMALE MINI FEMALE
MINI
FEMALE MINI FEMALE
MICRO
MALE MINI MALE
MINI
1
2 3
1
2 3
4
23
145
41 3
2
132
41 3
2
41
32
5
41 3
2
41 3
2
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
devicenet™ Passive “T” mini devicenet™ Passive “T” mini to micro
ParT no. deSCriPTion
60100 DeviceNet™Passive“T”–Mini
60101 DeviceNet™Passive“T”MicroType–MinitoMicro
Trex-onics® devicenet™ quick-Connect™ Wiring System accessories
Wiring Scheme Wiring Scheme
•ULListed•CSA•ODVAConformity•RoHSCompliant
DeviceNet™compatibleaccessoriesmeetallelectricalrequirementsoftheODVAandaredesignedtosimplifytheadditionofasensortoanexistingsystem. TPC Quick-Connect™ Accessories are a molded design making them inherently oil and shock resistant. Available in both Min and Mini-Micro configurations.
DeviceNet™ Compatible “T”.
Meetsallelectricalrequirementsof Open DeviceNet™ Vendor Association (ODVA™).
Oil and shock resistant.
All molded construction.
Designed to simplify the addition of a sensor to an existing system.
DeviceNet™ Compatible “T”.
Meetsallelectricalrequirementsof Open DeviceNet™ Vendor Association (ODVA™).
Oil and shock resistant.
All molded construction.
Designed to simplify the addition of a sensor to an existing system.
Cord SetS & ConneCtor aSSeMblieS / quiCk-ConneCt™ aCCeSSorieS
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
28
Cord SetS & ConneCtor aSSeMblieS / quiCk-ConneCt™ aCCeSSorieS
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
devicenet™ “y” devicenet™ line Terminators
ParT no. deSCriPTion
60200 DeviceNet™Passive“Y”–Mini
60110 DeviceNet™ Male Terminator
60120 DeviceNet™ Female Terminator
Trex-onics® devicenet™ quick-Connect™ Wiring System accessories (Continued)
DeviceNet™ Compatible “Y”.
MeetsallelectricalrequirementsofOpenDeviceNet™ Vendor Association (ODVA™).
Oil and shock resistant. All molded construction.
Designed to simplify the addition of a sensor to an existing system.
DeviceNet™ Compatible.
MeetsallelectricalrequirementsofOpenDeviceNet™ Vendor Association (ODVA™).
Oil and shock resistant. All molded construction.
Designed to be used with Quick-Connect™ DeviceNet™ assemblies at a termination plug.
12345
12345
1 2 3 4 5
MALEFEMALEFEMALE3
54
12
3
54
12
3
12
54
FEMALE MINI
FEMALE MINI
MALE MINI
1.15” 29.22 mm
2.66” 67.57 mm
3.43” 87.12 mm MINI FEMALE
MINI FEMALE
MINI MALE
1 5
2
3
4
RESISTOR
FACE VIEW
2.141”
1.500”
5
43
2
1
WIRE VIEW GROUND CONTACT
COUPLING RINGTHREAD 7/8”-16 UN 2A
MALE TERMINATOR
COUPLING RING THREAD 7/8”-16 UN 2A
1 5
2
3
4
RESISTOR
FACE VIEW
2.141”
1.500”
5
43
2
1
WIRE VIEW GROUND CONTACT
COUPLING RINGTHREAD 7/8”-16 UN 2A
MALE TERMINATOR
GROUND CONTACT
WIRE VIEWFACE VIEW
RESISTER
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
29
Trex-onics® Flex-net receptacles for devicenet™ applications
•RoHSCompliant
Flex-Net Receptacles for DeviceNet™ are designed to mate with DeviceNet™ compatible plug connectors and accessories. Available as male or female in both Mini and Micro sizes.
1 Drain2 Red (V+)3 Black (V-)4 White (Can-H)5 Blue (Can-L)
7/8"-16 UN
7/8"-16 UN
1/2"-14 NPT
1/2"-14 NPT
M12 x 1
1/4"-18 NPT
Internal Threads M12 x 1
1/4"-18 NPT
1 Drain2 Red (V+)3 Black (V-)4 White (Can-H)5 Blue (Can-L)
1
2 3
1
2 3
4
23
145
41 3
2
132
41 3
2
41
32
5
41 3
2
41 3
2
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no. deSCriPTion FeeT meTerS
rP15a43F004 Male Receptacle — Mini 4.0 1.22
rP15C43F004 Female Receptacle — Mini 4.0 1.22
rT15r43F004 Male Receptacle — Micro 4.0 1.22
rT15T43F004 Female Receptacle — Micro 4.0 1.22
5 Pole mini reCePTaCleS
mini male
Mini Female
Face View of Female Mini receptacle
5 Pole miCro reCePTaCleS
micro male
Micro Female
Face View of Female Micro receptacle
Cord SetS & ConneCtor aSSeMblieS / quiCk-ConneCt™ aCCeSSorieS
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
30
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
31
aCCeSSorieS / Cable glandS & Strain relieFS
Kord-gard® mesh Cord Grips•ULListed•CSA•RoHSCompliant•SuitableforUseinHazardousLocationsperClassI,Div.2,ClassII,Div.1&2,andClassIII,Div.1&2 •ExtraHard-DutyStrainRelief•Straight&90°Configurations
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no. Cord o.d. ranGe (IN) FiTTing Size nUMber oF
buShinGSKnoCK-oUT drill SizeSTraiGhT 90°
55405 59405 0.124–0.312 3/8" NPT 3 11/16"
55410 59410 0.250–0.438 3/8" NPT 3 11/16"
55415 59415 0.312–0.500 1/2" NPT 3 7/8"
55420 59420 0.437–0.625 1/2" NPT 3 7/8"
55430 59430 0.562–0.750 3/4" NPT 2 1-1/8"
55440 59440 0.687–0.875 3/4" NPT 1 1-1/8"
55445 59445 0.745–1.000 1" NPT 2 1-3/8"
55450 59450 0.870–1.125 1-1/4" NPT 2 1-3/4"
55455 59455 1.105–1.375 1-1/4" NPT 2 1-3/4"
55460 59460 1.320–1.562 2" NPT 2 2-3/8"
55465 59465 1.413–1.655 2" NPT 2 2-3/8"
55470 — 1.68–1.81 2" NPT 1 2-3/8"
55471 — 1.81–2.06 2" NPT 1 2-3/8"
55474 — 2.06–2.43 2-1/2" NPT 3 2-7/8"
55437 — 2.188–2.312 3" NPT 1 3-1/2"
1. full double-woven stainless steel mesh — Provides exceptional gripping strength, longer life. Resists corrosion.
2. unique drop-in basket design — Easier assembly.
3. nickel-plated friction ring — Provides uniform compres-sion for a proper seal. Prevents bushing damage.
4. synthetic sealing bushing — Seals out water, oil, and other contaminants. 250°F maximum operating temperature.
5. multiple bushing siZes — Covers a broad range of cord and cable sizes.
6. aluminum compression bushing and threaded body — Resistant to corrosion and weathering. Easy attachment to pendants and electrical enclosures. Available in both a 90° and straight configura-tion.
7. sealing o-ring and locknut — Seals out oil, chemicals and other contaminants. Locknut included with each unit.
4
2 3 5 6
7
1
FeaTUreS & beneFiTS
aCCeSSorieS / Cable glandS & Strain relieFS
aluminum Straight and 90° grip-Seals®
Each Grip-Seal® package includes the grip-seal body, O-ring and locking nut. Our aluminum compression bushing and threaded body is resistant to corrosion and weathering, and has a maximum operating temperature of 250°F. The nickel-plated friction ring provides a uniform compression for a proper environmental seal against dust, moisture and chemicals.
1. nickel-plated friction ring — Provides uniform compression for a proper seal. Prevents bushing damage and results in a tight, uniform seal on the cord surface.
2. multiple sealing bushings — Provides environmental seal against dust, moisture, chemicals. One part number covers a variety of cord diameters. 250°F maximum operating temperature.
3. aluminum compression bushing and threaded body — Resistant to corrosion and weathering. Easy attachment to pendants and electrical enclosures. Available in both a 90˚ and straight configuration.
4. sealing o-ring — Seals out oil, chemicals and other contaminants. Locknut included with each unit.
1 23
4
FeaTUreS & beneFiTS
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no. ConFigUraTion FiTTing Size Cord o.d. ranGe (IN) nUMber oF bUSHingS
55001 Straight 3/8" NPT 0.188–0.312 2
55002 Straight 3/8" NPT 0.312–0.438 2
55003 Straight 1/2" NPT 0.250–0.375 2
55004 Straight 1/2" NPT 0.375–0.500 2
55005 Straight 1/2" NPT 0.500–0.625 2
550061 Straight 3/4" NPT 0.188–0.250 1
55006 Straight 3/4" NPT 0.500–0.688 2
55007 Straight 3/4" NPT 0.625–0.812 2
55008 Straight 1" NPT 0.688–0.875 2
55009 Straight 1" NPT 0.812–1.000 2
55010 Straight 1-1/4" NPT 0.875–1.125 2
55011 Straight 1-1/4" NPT 1.125–1.375 2
55012 Straight 1-1/2" NPT 0.875–1.125 2
55013 Straight 1-1/2" NPT 1.125–1.375 2
55014 Straight 2" NPT 1.250–1.562 2
55015 Straight 2" NPT 1.562–1.812 2
55016 Straight 2-1/2" NPT 1.812–2.062 2
55017 Straight 2-1/2" NPT 2.062–2.312 2
55020 Straight 3" NPT 2.437–2.812 2
55901 90˚ 3/8" NPT 0.188–0.312 2
55902 90˚ 3/8" NPT 0.312–0.438 2
55903 90˚ 1/2" NPT 0.250–0.375 2
55904 90˚ 1/2" NPT 0.375–0.500 2
55905 90˚ 1/2" NPT 0.500–0.625 2
55906 90˚ 3/4" NPT 0.500–0.688 2
55907 90˚ 3/4" NPT 0.625–0.812 2
55908 90˚ 1" NPT 0.688–0.875 2
55909 90˚ 1" NPT 0.812–1.00 2
55910 90˚ 1-1/4" NPT 0.875–1.125 2
55911 90˚ 1-1/4" NPT 1.125–1.375 2
55914 90˚ 1 1/2" NPT 1.125–1.250 1
55912 90˚ 2" NPT 1.250–1.562 2
55913 90˚ 2" NPT 1.562–1.812 2
•ULListed•CSA•RoHSCompliant•SuitableforUseinHazardousLocationsperClassI,Div.2,ClassII,Div.1&2,andClassIII,Div.1&2 •LiquidTightSeal•Straightand90°Configurations
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
32
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
33
Vulko-Wrap® insulating Tape (yellow & black)
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
ParT no. nominal ThiCkneSS nominal WidTh nominal
lenGThWraP
ColorGuideline
Color
dieleCTriC STrenGTh/Per
mil1 roll 5 roll PaCk
98412 98412d 40 Mils 1 in (2.54 cm) 36 ft (1100 cm) Yellow Red 300 Volts
98512 98512d 50 Mils 1-1/2 in (3.81 cm) 36 ft (1100 cm) Yellow Black 275 Volts
98412bK 98412bKd 40 Mils 1 in (2.54 cm) 36 ft (1100 cm) Black Green 300 Volts
98512bK 98512bKd 50 Mils 1-1/2 in (3.81 cm) 36 ft (1100 cm) Black Yellow 275 Volts
18412 (reinforced) – 40 Mils 1 in (2.54 cm) 36 ft (1100 cm) Black None 500 Volts
SPeCiFiCaTionS Meets U.S. Military Spec. MIL-I-46852, superseded by CID A-A-59163A, Type II.
dieleCTriC STrenGTh (Per ASTM D-149): 300 volts per mil of finished wrap thickness for 40 mil and 275 volts per mil of finished wrap thickness for 50 mil.
TenSile/break STrenGTh (Per ASTM D-412): 700 PSI Min.; 17 lbs. for 40 mil; 42 lbs. for 50 mil.
elonGaTion (Per ASTMD-412): 300% minimum.
SHelF liFe Product should be stored at 70˚F or less for maximum shelf life. Store in original packaging in clean dry environment when not in use.
ProduCT limiTaTion Vulko-Wrap has a low abrasion and cut resistance. A protective overwrap is recommended for applications exposed to dragging or impact.
•CIDA-A-59163A,TypeII•Self-VulcanizingWrap•HighDielectricStrength•RoHSCompliant•TemperatureRating-60ºFto400ºF
Vulko-Wrap® is TPC’s popular self-vulcanizing insulated wrap. Made of a specially compounded, synthetic silicone elastomer, this tape is resistant to oil, water, ozone and many chemicals. It has a high dielectric strength and can be used on all electrical connections. It sticks to itself without sticky residueandfullybondsin24hoursyetremainspliableintheapplication.Itremainseffectiveintemperaturesrangingfrom-60°Fto+400°F.Vulko-Wrapis available in 40 or 50 mil thickness as well as a reinforced option. It comes in yellow and black.
1. high dielectric strength — Can be used for all electrical connections.
2. specially compounded, synthetic silicone elastomer — Resistant to oil, water, ozone, and many chemicals. Wide temperature range from-60°Fto+400°F.
3. vulcaniZes immediately — Requiresnoheat–becomesfullybondedin24hoursatroomtemperature. Remains pliable over time.
4. no adhesives / adheres only to itself — Easytoremove–leavesnoresidue.Coveredfittingsare immediately reusable.
5. triangular shape with color guideline — Allows even thickness for uniform high dielectric strength.
6. stretches to approximately 2-1/2 times its length — Conforms to irregular shapes and uneven surfaces. Can be used on parts which move or vibrate.
7. width 1" to 1-1/2" — Covers more surface than ordinary tape with a single wrap.
8. available in 40 mil or 50 mil thickness — Extra thick design allows wrapping over sharp and irregular surfaces without tearing or puncturing.
FeaTUreS & beneFiTS
Storage/dispenser box availableKeep rolls protected and organized in sturdy, reusable, compact box
aCCeSSorieS / Vulko-Wrap
non-reinForCed
reinForCed
mylar separator
1" & 11/2" Width
40 MIL or 50 MIL Thickness
abrasion resistant Ultra-Sleeve High Temperature Sleeving with Closures
•ContinuousTemperatureRange-40°Cto66°C(-40°Fto150°F)•AbrasionResistant
AbrasionResistantUltra-SleevewithClosuresofferaquickandeasywaytoinstallprotectivesleeving.Choosefromhookandloopclosure,zipperclosureor both hook and loop and zipper closure. Ultra-Sleeve offers superior protection against tearing and abrasion adding greater protection to your electrical cables, water lines, hydraulic hoses, air lines and other critical areas. It offers heat resistance up to 150°F. Available in 1-1/2" inner diameter and 3" diameter.
ordering inForMaTion (MINIMUM PURCHASE MAY BE REQUIRED IF PRODUCT NOT STOCKED)
1. unique closure designs for quick installation — Select Hook and Loop, Zipper or combination Hook and Loop & Zipper closuredesign.Providesquickfieldinstallationandremovalofsleeving.
2. extra thick braid — Offers superior protection in abusive environments.
3. protects cables and equipment — Protect cables from wear due to abrasion. Decrease downtime due to cable failure. Prevents equipmentbeingmarredbychainsorcables.
• ElectricalCables • WaterLines • HydraulicHoses • AirLines • AndOtherCriticalAreas
4. abrasion resistant finishing compounds — Specially designed with heavy-duty nylon/polyester fibers and impregnated with abrasion resistant polymers to provide abrasion protection in harsh applications.
5. available in multiple lengths and cable diameters — Allows you to buy the right size for the job. Protects most cable sizes.
FeaTUreS & beneFiTS
aPPliCaTionS
hook & loop and zipper Closure
hook & loop Closure
SleeVing inner diameTer (IN) lenGTh (FT)
ParT no.
hook & looP CloSure ziPPer CloSure hook & looP and ziPPer CloSure
1.50
2 49652y 49752y 49852y
3 49632y 49732y 49832y
4 49642y 49742y 49842y
6 49602y 49702y 49802y
8 49612y 49712y 49812y
10 49622y 49722y 49822y
15 49662y - -
3.50
2 49653y 49753y 49853y
3 49633y 49733y 49833y
4 49643y 49743y 49843y
6 49603y 49703y 49803y
8 49613y 49713y 49813y
10 49623y 49723y 49823y
15 49663y - -
5.25
2 49655y - -
3 49635y - -
4 49645y - -
6 49605y - -
8 49615y - -
10 49625y - -
zipper Closure
aCCeSSorieS / SleeVing
TPC Wire & Cable CorP. • USa 800-521-7935 • Canada 800-545-0122 • MexiCo 001-877-283-1696Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
34
exPerTS in CUSToM Cable and aSSeMbly SolUTionS • WWW.TPCWire.CoM Specifications subject to change. For complete specifications and availability, ask your TPC Sales Representative or call 800-521-7935.
35
Wire & Cable / CuStoM deSigned
Custom designed & engineered
let TPC design the perfect cable for you! Call us today at 800-521-7935.
TPC Wire & Cable Corp. provides custom engineered products designed with application and environmental information supplied by the customer.
These products are built specifically to solve a particular problem for an individual customer and represent a valuable service. The engineers who solve
these problems are from the electrical, mechanical, chemical and industrial engineering disciplines.
TPC’sexpertiseinmaterials,designandmanufacturingprovidessuperiorcableperformanceresultinginlongercablelifeandreducedequipment
downtime. TPC’s cable design engineers can assemble the critical components of your cable into a final design that will give you a longer lasting cost
effective alternative to constantly replacing cables.
TPC ProVideS UniqUe CUSToM Cable deSignS For THe FolloWing TyPiCal abUSiVe aPPliCaTion enVironMenTS:
•AbrasiveSurfaces
•CableTrays
•CableCarriers
•ExtremeTemperatures
•ChemicalAreas
•RefrigerationSystems
•OilyFluids
•AerationPonds
•CuttingLubricants
•WasteWaterTreatment
•IntrinsicallySafeCircuits
•LandBasedDrilling
•EncoderCircuits
•Quarries
•ResolverCircuits
•SubstationPower
•FestoonSystems
•TemporaryPowerSystems
•LadleCars
•MilitarySystems
•MeltFurnaces
•AerospaceSystems
•MetalMachining
•LivestockAreas
•MetalTreatment
•RentalEquipment
•PaintBooths
•MedicalEquipment
•RoboticSystems
•CanningPlants
•ShuttlePresses
•BottlingPlants
•WashDownAreas
•PackagingSystems
•StagePower
•Fryers&Ovens
•ControlPendants
•ConveyingEquipment
•MassTransitSystems
•SortingEquipment
•CableReels
•WeldingEquipment
•IndustrialElevators
•GantryCrane
•MiningEquipment
•MotorOperatedValves
•VisionSystems
•EmergencyIsolationValves
•VFDMotorSystems
•ControlRooms
•CommunicationSytems
•Smelting&RefiningProcess
•DataSystems
•SootblowerEquipment
•TopDriveSystems
•MudPumpEquipment
•WindGearBoxSystem
•FoodProcessingAreas
•OffRoadVehicles
•PipeInspectionSystems
•SanitizingAreas
•CNCEquipment
•BolsterSystems
automotive metals & minerals Food & beverage Government
industrial manufacturing mining oil & Gas Transportation
utility & alternative energy Wood, Pulp & Paper
TPC videos highlight how our cables brilliantly handle extreme environments such as flames, impact, chemicals, oil, abrasion and more. View them online at
www.tpcwire.com/company/videos.
WARRANTY AND DISCLAIMER: Seller makes no warranties, express or implied, with respect to this product, and seller disclaims any implied warranties of merchantability or fitness for anyparticularpurpose.Further,sellerwillnotberesponsibleforanyconsequential,incidentalorindirectdamages(including,butnotlimitedto,anylossofprofit)fromanycausewhatsoever.
TPC1108 (02/17) PRINTED IN U.S.A. ©Copyright 2017 by TPC Wire & Cable Corp. All rights reserved. No portion of this publication, whether in whole or in part, can be reproduced without the express written consent of TPC Wire & Cable Corp.
a broad line Supplier of High quality, High Performance Wire & Cable Products designed for abusive industrial environments
SUPer-Trex® Power and Control Cables designed for Harsh Industrial Environments
Trex-oniCS® Designed for High Flexing Applications
CHeM-gard® Designed for Extreme Heat, Cold and Chemical Exposure
THerMo-Trex® High Temperature Cable and Accessories
PoWer-Trex® Temporary and Emergency Power Family of Cable and Accessories
qUiCK-ConneCTS® Quickly Switch Out Control Devices
griP-Seal® Cord and Cable Protection against Extreme Temperatures and Chemicals
VUlKo-WraP® Self Vulcanizing Insulated Tape
Kord-gard® Strain Relief for Cords and Cables
CuSTom enGineered ProduCTS Designed to SolveYourUniqueApplicationProblems
TPC Wire & Cable CorP. HEADQUARTERS 9600 VALLEY VIEW RD, MACEDONIA, OHIO 44056
USA800-521-7935•FAX866-528-2930•CANADA800-545-0122•MEXICO001-877-283-1696
CHILE1230-020-0229•COLOMBIA0-1-800-915-7519•PERU0800-54863•WWW.TPCWire.Com