+ All Categories
Home > Documents > TimberTech2 Acoustic Plus Traffic Wood - Amazon S3 · TimberTech2 Acoustic Plus Underlay Technical...

TimberTech2 Acoustic Plus Traffic Wood - Amazon S3 · TimberTech2 Acoustic Plus Underlay Technical...

Date post: 19-Jun-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
1
Heavy Traffic Available in Code QAU-TTA-02 Size 1m x 8m (8m 2 ) Thickness 5mm Wood QA Flooring Solutions Ltd Unit 2 Hurricane Drive Liverpool L24 8RL Tel: 0151 495 3434 Fax: 0151 427 0484 Email: sales@qaflooringsolutions.com www.qaflooringsolutions.com The sound of silence… TimberTech2 Acoustic Plus has an exceptional impact sound insulation level of 27dB – really bringing down noise levels in the room and making it a better place to be. Protects against moisture The gold vapour barrier stops your oor covering being damaged by moisture rising up from the sub-floor. Heavyweight champ The heavy mass stability of TimberTech2 Acoustic Plus means your floor’s always fully supported, reducing the wear and tear to it, whatever a pounding it takes! Heavyweight natural rubber underlay with outstanding noise reduction. Simply Better Best for *Suitable for hotels and public buildings Cushioning Level Floors Underfloor Heating Hard Wearing Heat Insulation Commercial Use* Moisture Protection Sound Reduction Compression Recovery TimberTech2 Acoustic Plus Underlay Technical Data Properties Unit Value Method Density kg/m 3 750 + 50 internal Weight per square metre kg/m 2 3.7 + 0.37 internal Impact Sound Reduction dB ~ 27 BS EN ISO 717-2:2013 Thermal Conductivity measured at 10°C W/m k 0.036 DIN 4108 Thermal Resistance Tog 0.66 BS4745:2005 (ISO 5085-1:1989) Maximum Compression Load kN/m 2 2-5 DIN EN 1606 The information given above may vary and is partly based on information from our suppliers. It represents the prevailing level of expertise and is not binding in a legal sense. The compliance of legal requirements lies within the customers own responsibility. Flammability Pass Low radius of effect Hot Metal Nut Test
Transcript
Page 1: TimberTech2 Acoustic Plus Traffic Wood - Amazon S3 · TimberTech2 Acoustic Plus Underlay Technical Data Properties Unit Value Method Density kg/m3 750 + 50 internal Weight per square

Heavy Traffic

Available in Code QAU-TTA-02

Size 1m x 8m (8m2)

Thickness 5mm

Wood

QA Flooring Solutions LtdUnit 2 Hurricane Drive

Liverpool L24 8RL

Tel: 0151 495 3434

Fax: 0151 427 0484

Email: [email protected]

www.qaflooringsolutions.com

The sound of silence… TimberTech2 Acoustic Plus has an

exceptional impact sound insulation level of 27dB – really bringing down noise levels in the room and making it a better place to be.

Protects against moisture The gold vapour barrier stops your floor

covering being damaged by moisture rising up from the sub-floor.

Heavyweight champ The heavy mass stability of TimberTech2

Acoustic Plus means your floor’s always fully supported, reducing the wear and tear to it, whatever a pounding it takes!

Heavyweight natural rubber underlay with outstanding noise reduction.

Simply Better

Best for

*Suitable for hotels and public buildings

Cushioning

Level Floors

Underfloor Heating

Hard Wearing

Heat Insulation

Commercial Use*

Moisture Protection

Sound Reduction

Compression Recovery

TimberTech2 Acoustic PlusUnderlay

Technical DataProperties Unit Value Method

Density kg/m3 750 + 50 internal

Weight per square metre kg/m2 3.7 + 0.37 internal

Impact Sound Reduction dB ~ 27 BS EN ISO 717-2:2013

Thermal Conductivity measured at 10°C W/m k 0.036 DIN 4108

Thermal Resistance Tog 0.66 BS4745:2005

(ISO 5085-1:1989)

Maximum Compression Load kN/m2 2-5 DIN EN 1606

The information given above may vary and is partly based on information from our suppliers. It represents the prevailing level of expertise and is not binding in a legal sense. The compliance of legal requirements lies within the customers own responsibility.

Flammability Pass Low radius of effect

Hot Metal Nut Test

Recommended