TITANIUM TKLR G B M E C H A N I C A L G A M I N G K E Y B O A R D

U S E R M A N U A L

TITANIUM TKL

Thank you for purchasing Oversteel TITANIUM TKL Keyboard.

Oversteel TITANIUM TKL is a plug and play usb interface RGB

keyboard.

For more functions, you can install the software from our website:

www.oversteelgaming.com

T E C H N I C A L S P E C I F I C AT I O N• Switch: OUTEMU mechanical switches

• Lifespan: Up to 50 million keystrokes

• Backlit Mode: RGB 19 modes

• Side Backlit mode: RGB 9 modes

• Total Keys: 88 full Anti-ghosting

• Polling Rate: 1000Hz Ultrapolling

• Multimedia Keys: Fn+ combinatioin keys for multimedia

• Cable Type: 1.6m braided-fiber USB cable

• Size/Wight: 358x134x43mm/766gr

• Material: Aluminium Cover+ABS

• System Requirements: Win 10/8/7 or Mac OS X 10.8-10/10

C A U T I O N

keyboard’s main board has been coated with water and dust proof nano-

technology. If accidently poured with water, plug out the cable immediately and

turn the keyboard with button faced down to make water flow out easily.

TITANIUM TKL

SPECTRUM MODE SELECTION

COLOR MODE SELECTION

BACKLIGHT CUSTOM MODE

RGB SIDE ILLUMINATION

RESET

MULTIMEDIAADJUSTING BRIGHTNESS AND SPEED

Change RGB modes

Preset Backlight mode

Brightness + / -

Speed + / -

Press to change RGB side color

Reset

Change Color

Backlight custom

Ins

1 5Bloq

Esc

FN +1-5 can set up for custom mode. To record, press

FN+Backspace, recording start when keyboard start blinking.

Press the selected buttons and press FN+backspace to end

recording.

Media PlayerF1

Volume Down / Up / MuteF2 F3 F4

Previous Track / Next TrackF6 F8

MailF9

HomeF10

Win LockF11

CalculatorF12

Stop / Play or PauseF5 F7

TITANIUM TKL

C U S T O M I Z E L I G H T I N G

• Select each key for function replacement

• You can choose from 8 different customization for each key

• After choosing your desire function Press OK.

• You can select up to 19 Illumination mode.

• You can customize your own key color by selecting “User Define”.

• You can customize the illumination direction, speed and even the

brightness.

M A C R O E D I T T I N G & S E T T I N G

• To make a new macro in settings, input the macro key and then input

the action.

• The command recording will start just after you press the Record

button.

• You can edit the delay time before saving the macro.

• Press the save button to save your macro and then it will be red.

TITANIUM TKLR G B M E C H A N I C A L G A M I N G K E Y B O A R D