www.ocl.com

MEASUREMENTS

UA1-O1OA-48-MW-BTP

UnaTM

• Simple, linear profile creates soft grazing effect on wall surface.

• Available with T5 and LED illumination options.

• Up to 65 lumens per watt.

• Field replacement of LED arrays and drivers is simple and requires minimal effort.

• LED luminaire reliability; L70 >70,000 hours at 70% lumen maintenance.

• 3 step MacAdam ellipse color binning.

• Heavy wall aluminum extruded profile.

• Extruded diffuser is high transmission frosted white acrylic, UV stable and UL-94 HB flame rated.

• 24 standard powder coat paints offered, however all RAL colors available.

• Contact factory for additional modifications or options.

OUTDOOR 3.25"3.5"89"

FEATURESMATCHING FIXTURES

3.25"3.5"

60"3.25"

3.5"

48"3.25"

3.5"

36"3.25"

3.5"

24"

WT. 5 LBS PER FOOT

3.25"

3.5"

14"

Pendant p.56

Sconce p.78

Recessed

Ceiling p.108

BEGIN HERE

Phone: 314.863.1895 | Fax: 314.863.3278 | www.ocl.com

FIXTURE SPECIFICATIONS

FOR ADDITIONAL INFORMATION GO TO WWW.OCL.COM AND SEARCH: UNA OUTDOOR

SERIES HANGING SYSTEM SIZE DIFFUSER FINISH LAMPING (PHOTOMETRIC TEST #) VOLTAGE OPTIONS

UA1

O1OA OUTDOOR ADA COMPLIANT SCONCE

NOTE: ONLY AVAILABLE IN DOWNWARD ORIENTATION

14

24

36

48

60

89

MW MATTE WHITE ACRYLIC

PTD PAINTED – SPECIFY CODE (EX. BKP FOR BLACK PAINT, SEE PAGE 122 FOR PAINT OPTIONS)

14”

1LD10/30K 1@10W LED 3000K1LD10/35K 1@10W LED 3500K (17602)1LD10/40K 1@10W LED 4000K

24”

1LF14 1@14W T51LF24 1@24W T5HO (15992)1LD18/30K 1@18W LED 3000K1LD18/35K 1@18W LED 3500K (17603)1LD18/40K 1@18W LED 4000K

36”

1LF21 1@21W T51LF39 1@39W T5HO (15993)1LD25/30K 1@25W LED 3000K1LD25/35K 1@25W LED 3500K (17604)1LD25/40K 1@25W LED 4000K

48”

1LF28 1@28W T51LF54 1@54W T5HO (16072)1LD33/30K 1@33W LED 3000K1LD33/35K 1@33W LED 3500K (17605)1LD33/40K 1@33W LED 4000K

60”

1LF35 1@35W T51LF80 1@80W T5HO (15994)1LD44/30K 1@44W LED 3000K1LD44/35K 1@44W LED 3500K (17606)1LD44/40K 1@44W LED 4000K

89”

2LF28 2@28W T52LF54 2@54W T5HO1LD64/30K 1@64W LED 3000K1LD64/35K 1@64W LED 3500K1LD64/40K 1@64W LED 4000K

120

277

347(FLU ONLY)

DMO 0-10V DIMMING DRIVER (LED ONLY)

DMA ADVANCE® MARK 10 DIMMING (FLUORESCENT ONLY)

DMA7 ADVANCE® MARK 7 DIMMING (FLUORESCENT ONLY)

DML LUTRON® DIMMING (FLUORESCENT ONLY)

FUS FUSED

SPECIFY CATALOG CODE

- - - - - - - --

SAMPLE CODE: UA1-O1OA-48-MW-BTP-1LD33/30K-120 PHOTOMETRIC INFORMATION AVAILABLE AT WWW.OCL.COM

• Fixture is supplied with a 0.875” KO for attachment of 0.5” conduit and requires additional anchors.

• Bodine® emergency ballast available, standard with remote mounted test switch and indicator light (fluorescent only).

• Advance® and Lutron® dimming ballasts available. Controls not included.

• Integral HPF electronic fluorescent ballast with Class A sound rating (3-5 year warranty depending on ballast specification).

• Integral Class II driver (3-5 year warranty depending on driver specification).

• For photometric data, please visit www.ocl.com.

• For lamp and base information, see pages 124-131 in the reference section.

• Structural mounting required for fixtures over 50 lbs.

• For specific mounting instructions, please contact factory.

• Five year product warranty.

SUPPLY WIRE ENTRY (0.875” HOLE) ALWAYS 6.125” FROM EITHER END OF FIXTURE

MOUNTING SPACING

0.875” HOLE FOR 0.5” CONDUIT

6.125”

FIXTURE SIZE

14”24”36”48”60”89”

MOUNTING SPACING

Center12”24”36”48”77”

MOUNTING INFORMATION