To install the operatingsystem-based Graphical User Interface (GUI) and Command Line Interface (CLI)...

To install the operatingsystem-based To install the operatingsystem-based Graphical User Interface (GUI) and Graphical User Interface (GUI) and

Command Line Interface (CLI)Command Line Interface (CLI)

The steps the operating system installation based GUI (Graphical User Interface)

HOME

COMPETENCE MAPING

Module 7 To install the operatingsystem-based Graphical User Interface (GUI)

2 3

Mendiagnosis permasalahan pengoperasian PC yang tersambung jaringangnosis

Melakukan perbaikan dan/ atau setting ulang koneksi jaringan

an

Melakukan instalasi sistem operasi jaringan berbasis GUI (Graphical User

Interface) dan Text

Melakukan instalasi perangkat jaringan berbasis luas (Wide Area

Network)

Mendiagnosis permasalahan perangkat yang tersambung jaringan berbasis luas

(Wide Area Network)

Membuat desain sistem keamanan jaringan

Mendiagnosis permasalahan pengoperasian PC dan

periferal

Melakukan perbaikan dan/ atau setting ulang sistem PC

Melakukan perbaikan periferal

Melakukan instalasi software

Melakukan perawatan PC

Melakukan instalasi sistem operasi berbasis graphical user interface (GUI)

dan command line interface (CLI)

Melakukan instalasi perangkat jaringan lokal (Local Area

Network)

Menerapkan teknik elektronika analog dan digital dasar

Menerapkan fungsi peripheral dan instalasi PC

Melakukan perbaikan dan/ atau setting ulang koneksi jaringan berbasis luas

(Wide Area Network)

Mengadministrasi server dalam jaringan

Merancang bangun dan menganalisa Wide Area

Network

Merancang web data base untuk content server

Lulus

Melakukan instalasi sistem operasi dasar

Menerapkan K 3 LH

Merakit Personal Komputer

Dasar Kejuruan Level I ( Kelas X ) Level II ( Kelas XI ) Level III ( Kelas XII )1

Melakukan instalasi sistem operasi berbasis graphical user

interface (GUI) dan command line interface (CLI)

Klik Disini

HOME


PURPOSE

The steps the operating system installation based GUI (Graphical User Interface)

Implement the installation of the operating system-based GUI according Installation Manual

Implement the installation of the operating system-based GUI according Installation Manual

Implement the installation of the operating system-based text appropriate Installation Manual

HOME

Purpose

Explain the steps the students can install the operating

system-based GUI (Graphical User Interface)

Main criticism

Explain the steps based operating system installation

GUI (Graphical User Interface)


That is a program created to control and coordinate all activities of computer systems


Operating System (operating system)

Operating System chart


Programs

OPERATING SYSTEM

Hardware

CPU I/O Devices

RAM

BUS

System Call

UsersPrograms

- Leisure - Efficient - Evolved.


Operating system has three main objectives :

- Min 300 Mhz processor - RAM 128 Mb - Harddisk 1.5 Gb Free Space - CD-ROM / DVD


Preparation Installing MS Windows XP

Hardware Requirements :

Formative test 1

1. What is the operating system? 2. Specify the types of operating systems

based on interface to the user, along with

an example!


Implement the installation of the operating system-based GUI according Installation

Manual



HOME

Purpose

Students can conduct the installation of the operating system-based GUI appropriate Installation Manual

Main criticism Implement the installation of the operating system-based GUI appropriate Installation Manual


HOME

Installing Windows XP

1. Enter the BIOS menu, select the Boot menu, and select Boot Device Priority.


HOME

2. Change CD-ROM at the 1st Boot Device to be able to boot from the CD-ROM.


3.Restart computer, and enter the master CD

of Windows XP, when the words appear any key the press to boot from CD. . . press any key.


4. Next on Licensing Agreement, press F8 to continue


5.To create a new partition, press C key on the keyboard and press Enter to install.


6. Enter how big a partition you want to create in megabytes (MB)


7. Then press Enter to begin the installation process (press D to delete the partition that you created)


8.Choose NTFS file system (Quick) or FAT file system (Quick) and press Enter


9. It will appear like picture below


10. After the display appears as below then click Next


11. Fill in your name and organization on the field that appears, then click Next


12. Enter Serial Number from the windows type, then click Next


13. Fill Computer Name and Password (administrator) to access them. Then click Next


14. Set Time Zone at the position (GMT +07:00) Bangkok,

Hanoi, Jakarta. Click Next.


15.Typical setting : This option in the network will be

created in the default Windows and

Custom settings : for setting up your network manually.

Select Typical settings for a more familiar. Click Next.


16. If you already are on the desktop look like this means that the installation proceeded smoothly.


Formative test 2

1. Explain the steps in implementing the installation of the

operating system-based GUI according Installation Manual?

2. How the security of Windows XP compared to Windows 9x?


Explain the steps the operating system installation based command line

interface (CLI)

To install the operatingsystem-based To install the operatingsystem-based Graphical User Interface (GUI) and Command Graphical User Interface (GUI) and Command

Line Interface (CLI)Line Interface (CLI)

HOME

PurposeExplain the steps the students can install the operating system based command line interface (CLI)

Main criticism Explain the steps the operating system installation based command line interface (CLI)


HOME

Installing FreeBSD

1. Booting via cdrom -> enter


2. Sysinstall appear - select 'Standard' -> enter


3. 'OK' - will appear to prepare the program fdisk partition FreeBSD. Select and press' C 'Create slice


4. Determining large FreeBSD partition, simply press enter (OK)


5. Have FreeBSD partition - press' Q 'finish.


6. If there is only one FreeBSD select 'Standard'.


7. Press' A 'to create the partition automatically. To create its own partition and press' C 'Create, if it is completed press' Q' finish.


8. Choosing the installation media. Select'1 CD / DVD '- enter.


9. Start the installation process to finish and then wait - 'OK'.


10. Configuration ethernet. Select 'YES' to do the configuration if you do not select 'NO'.


11. 'No' is not to enable IPv6.


12. Select 'No' if you want to configure manually.


13. Manual configuration. If you're done - OK. Then 'Yes' to activate


14. Select 'Yes' to create a user account.


15. Select 'Users'


16. Fill in all the data and then 'OK'. To be able to run the command su Member groups: the content of the wheel.


17. 'No' and then 'Yes' the system installation is complete reboot


Formative Test 2

1. Describe the steps to install FreeBSD?

2. How FreeBSD security compared to the windows?




Implement the installation of the operating system-based text appropriate

Installation ManualHOME

Purpose

Students can conduct the installation of the operating system-based text appropriate Installation Manual.

Main criticism Implement the installation of the operating system-based text appropriate Installation Manual


HOME

Installing Ubuntu Linux

1. Insert the CD Master Ubuntu Linux, the menu display will appear :


2. Next prompted to specify the language used during installation.


3. Next is to choose the location of the state living at this time. To select country, select Other - Asia - Indonesia


4. Next, we choose the keyboard that will be used. Will be

offered two methods to select the keyboard.

a. option Yes, some will be asked to press the button corresponding characters of the keyboard.

b. select No, the keyboard can be selected from a list provided


5. Ubuntu installer will make the initial loading tools and

packages required to perform hardware detection before

partition.


6. The first time, the installer will try to detect the network card. Fill in the desired hostname


7. Next is a set time zone.


8. Next we go to phase partition. Select the manual method, meaning that the partition will create its own partition, specify the following required mount pointnya


9. If you choose the partition that is still empty. You will be prompted to enter the big partition will be created, the file type systemnya, label, mount point, and so forth.


For root and other partitions, including / home, you should use the ext3 file system.


For / boot (if you create separate) ext2, and swap partition for the swap area.


If the case because, for example, because the excess RAM, you do not create the swap partition, a warning will appear like this


10.Setting full name, username and password.


11. Next, you will be prompted to enter a proxy address that is used if you use a proxy.

This is required to update during installation


12. If there is no problem, then the process has finished installing Ubuntu 8:10 Intrepid Ibex use this alternate CD.

Select continue and press enter to reboot


Formative test 2

1. Describe the steps to install Linux UBUNTU ?2. How UBUNTU Linux security when compared

with windows ?


HOME

Date post:	31-Dec-2015
Category:	Documents
Upload:	daniel-walsh
View:	223 times
Download:	0 times

To install the operatingsystem-based Graphical User Interface (GUI) and Command Line Interface (CLI)...

Documents