Tool Specification And Validation Data Sheet · 2015. 5. 21. · Tool Specification And Validation...

Tool Specification And Validation Data Sheet

Miniature open ended spanner with accurate clean face Jaws openings which are offset at 15°. Manufactured to BS 1842, DIN 3110 from Chrome Alloy steel, hardened, tempered and chrome plated

Photo:

Nom length NSN Size Comment

the relevant part No.

--


Specification No: METS/4/5/007

Tool Name: Spanner Double-ended - Open jaw BS/Whit

Specification:

Manufactured to DIN 3118/ISO 3318and ISO 10102 specification. Professional

quality, forged from chrome Alloy steel hardened, tempered and chrome plated.

Open jaw fixed. Head angle 15° Wrenching surface shape oval.

NSC

5120-99-9425967

5120-99-91 06228

5120-99-1203949

5120-99-91 06229

5120-99-1203950

5120-99-9106230

5120-99-1207888

5120-99-9106231

5120-99-1948808

5120-99-91 06232

5120-99-9106234

5120-99-9106233

5120-99-9506971

Status

Issue 1

Size BS!Whit

1A X 3/16

1A X 5/16

5/16 X 3/8

3/8 X 7/16

7/16 X 1/2

Y2 X 9/16

9/16 X 5/8

5/8 X 11/16

11/16 X 3/4

3/4 X 7/8

15/16 X 1-1/16

1 X 1-1/8

1-1/4 X 1-3/8

Authority

Nominal length (mm)

105

155

180

180

215

230

245

265

310

300

335

335

390

Date Issued

15/07/2011

Remarks/Notes:

Page 1 of 1 METS-4-5-007.doc


description: Double ended open jaw spanners, jaw offset 15°. Manufactured from Chrome Alloy steel, hardened, tempered and chrome plated to DIN 311 0/ISO 1085,3318,10102.

Size ("AF) Nominal length NSN Part No Comment(mm)

Paoe 1 of 1 METS-4-5-009 iss2.doc


SJ)ef;tn~_.lon No & DMC:

Short ltfiD't N•me:

Proprietary Supplier Details:

Stanc;ta.rd!S:

MateriaJ/Anish:

Brit!f description:

METS/4/5/012 I DMC HTC4 Spanner double-ended- Open jaw, metric, chrome finish

DIN 3110, ISO 3318, ISO 1085, ISO 10102

Chrome alloy steel. Chrome plated

·Double Ended Open Jaw Metric Spanner with Jaws offset at 15". Manufactured to DIN 3110,

ISO 3318, ISO 1085, ISO 10102 from Chrome alloy steel. Chrome plated

Photo:

NSN

512()..99-1228419

512()..99-1353692

5120-99-1352504

5120-99-91 06287

5120-99-1357331

512()..99-1206707

5120-99-9106288

5120-99-91 06289

5120-99-91 06290

5120-99-1357332

5120-99-9106291

5120.99-9106292

5120-12-1333617

5120-99-9106293

5120-99-1357333

5120-99-91 06294

512Q-99-nnoo8

5120-99-3006075

512()..99-9106296

5120-99-n72180

5120-99-1357334

5120-99-9106297

5120-99-9106299

5120-99-1357335

5120-99-n72181

5120-99-1357336

5120-99-1227183

512()..99-1357337

5120-99-1227184

5120-99-1357338

~'


Note/Issue Remarks:

1.


Double-ended- Open jaw, metric, slim line Spanner with Jaws offset at 15". Manufactured from Chrome alloy steel, Chrome plated to DIN 3110, ISO 3318, ISO 1085, ISO 10102.

Photo:

Nom length NSN Size (mm) Part No Comment

Page 1 of 1 METS-4·5-015 iss2.doc


Double ended open jaw spanners, jaw offset 15° each end. Manufactured from Chrome Alloy steel, hardened, tempered and chrome plated to DIN 3110/ISO 1085,3318,10102.

Photo:

Comment

P::~nP 1 nf 1


Manufactured to DIN 3110/ISO 1085,3318,10102 specification. Chrome Alloy steel, hardened, tempered and chrome plated.

Double ended open jaw spanners, jaw offset 15° x 75 o

Photo:

MFTS-4-'i-01A rlor.P~nA 1 nf 1


Spanner wrench also known as wheel spanner or Wheel Valve keys. Used for freeing seized valves on board ship. Manufactured from one solid piece of forged Alloy steel.

NOTE: This wrench must be manufactured as a solid forging to prevent failure in use. Wrenches produced as a fabricated unit or extended version usually require one or two welds which could produce a stress point causing the tool to fail when in use.

Photo:

P::~nP. 1 nf 1



Tool Name: Spanner Ring Double-ended - Deep Offset, AF sizes

Specification:

Manufactured to DIN 838/ISO 3318 specifications. Chrome Alloy steel,

hardened, tempered and chrome plated.

Deep offset 0 to 5 deg head to handle.

NSN

5120.99-9105967

5120-99-91 05968

5120-99-1276115

5120-99-9105969

5120-99-1276116

5120-99-91 05970

5120-99-1276118

5120-99-1276117

5120-99-9105971

5120-99-91 05972

5120-99-9105973

5120-99-6628728

5120-99-9105974

5120-99-1206716

5120-99-4656098

5120-99-91 05975

5120-99-9105976

5120-99-9105977

Remarks/Notes:

Size (ins)

5/16 X 3/8

7/16 X 1/2

1/2 X 9/16

9/16 X 5/8

19/32 X 11/16

11/16 X 3/4

3/4 X 7/8

25/32 X 13/16

13/16 X 7/8

7/8 X 15/16

15/16 X 1

7/8 X 1-1/16

15/16 X 1-1/8

1-1/16 X 1-1/8

1-1/16 X 1-1/4

1-1/4 X 1-7/16

1-5/16 X 1

1-5/8 X 1-13/16

1. Issue 2 - addition of item in Bold (x1)

Status Authority

Issue 2 -

Nominal length (mm)

205

212

225

225

245

265

285"

285

285

305

325

325

345

345

370

400

345

455

Date Issued

08/05/12

Page 1 of 1 METS-4·8·002 lss2.doc


Spanner Ring Double- ended. Deep offset and 0-5 o head to handle. Manufactured from

Chrome Alloy steel, hardened, tempered and chrome plated to DIN 838/ISO 3318 & 10104.

Photo:

Nom length NSN Size (mm) Comment

nder their relevant part No's

11..4L'TC" A 0 I"'H"\1) (...,,..') A ......


Chrome Alloy steel, hardened, tempered and chrome plated.

Brief description:

Spanner Ring Double-ended, Whitworth sizes, Deep offset 0 to 5 deg head to handle: Manufactured from Chrome Alloysteel, hardened, tempered and chrome plated to DIN 838/ISO 3318.

Photo:

•

Nom length Comment

1 . Current Supplier - nst the relevant part No.

Paqe 1 of 1 METS-4-8-004 iss2


Spanner Ring Double-ended - Flat Offset, AF sizes and 15 deg head to handle. Manufactured from Chrome Alloy steel, hardened, tempered and chrome plated to DIN 837/ISO 3318.

Photo:

Nom length Part No Comment

Page 1 of 1 METS-4-8-007 iss2


Bi hexagon, Standard length -straight oo offset head.

Federal Spec GGG-W-001405 (American sizes), Chrome plated

Photo:

Nominal length Part No

1.

o..,,, 1 ,....; 1


Spanner Ring Double- ended- Ratchet Flat, Metric sizes. Bi hexagon, straight oo head. Chrome plated and to Federal Spec GGG-W-001405 (American sizes).

Photo:

0 0

NSN Size (mm) Part No· Comment

Page 1 of 1 METS-4-8·009 iss2.doc


Spanner Ring Double- ended- Ratchet Flat, Metric sizes. Bi hexagon, straight oo head. Chrome plated and to Federal Spec GGG-W-001405 (American sizes).

Photo:

Nom length NSN Size (mm) Comment

1. Current Supplier r the relevant part No's


cally blacked, and

Brief description:

Cranked ratchet ring spanner with a 25 degrees head to handle angle and bi-hexagonal offthe-point (flank) drive form. Lever change reversible ratchet mechanism.

item Photo:

NSN Size (mm) Comment

5120-01-4288643 7

200 200 225

1. Proprietary Suppl" r their part numbers as listed. ly technically acceptab

METS-4-8-01 0 lss3.doc Paae 1 of 1


Spanner Ring Double-ended - Shallow Offset, Metric sizes, flank drive, 10 deg head to handle. Manufactured from Chrome Alloy steel, hardened, tempered and chrome plated to ASME/ANSI 8107.6-1994 I SAE AS 954 I GGG-W-636E.

Photo:

NoNSN Size (mm) Comment

1. Current Supplier


Spanner Ring Double- ended- Shallow offset, Standard length - Metric sizes, flank drive, 1 oo head to handle. Manufactured from Chrome Alloy steel, hardened, tempered and chrome plated to ASMEIANSI 8107.6-1994 I SAE AS 954 I GGG-W-636E.

Photo:

NNSN Size (mm) Comment

Note/Issue Remarks:

o.,,.,,. 1 nf 1

.·~·~----


al

Brief description:

Spanner single-ended- Open jaw Imperial, forged from chrome Alloy steel 31CrV3 hardened, tempered. Black phosphate finish

Photo:

NSN Size ("AF) Comment

der their part numbers listed.

P::ln.::> 1 l"'f 1


Strap Wrenches Chrome Alloy steel wrench with Nylon/Fibre Strap etc.

5120-00-0202947 has double ended square drive- 1/2 and 3/8 SO with Nylon strap 5120-99-1372663 & 5120-99-1206743 have wrenching bars with curved toe grip foot and plastic coated handle

Photo:

5120-00-020294 7 5120-99-1372663 & 5120-99-1206743

Strap BarCapacity

NSN Width length Comment(Ins)

(ins) (mm)

1. Current Supplier I under their respective part No's


Wrench strap with 3/8 inch square drive, for torque wrench, with strap and rubber insert. Used for torque loading electrical connectors. Wrench handle made from Aluminium alloy, Nichol plate. Wedge made from stainless steel. Strap made from impregnated fabric, 1/2 -inch wide and 12 inch long. Suitable for connectors up to 2 inch diameter ·

Photo: ---6.$0


Set of 16 long pattern flexible head ratcheting combination spanners, forged from chrome Alloy steel, hardened, tempered, chrome plated and fully polished throughout. Fixed open jaw set at 15 degrees and flexible head of ratchet end allows movement through 180 degrees with ratchetfng increments of only 5 degrees

Photo:

1. Current supplier their stock numbers as listed

------------------~--~-


Socket 1/4" Square Drive- Bi-hex with Universal Joint, AF

Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection.

Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.

All sockets to have a through hole for pin or ball retaining

Photo:

CommentNSN Size (ins)

1. Current Supplier- er the Part Numbers listed.

Paae 1 of 1


Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B 107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

NSN Size (mm) Comments

1. Current Suppli under Part Numbers listed

Page 1 of 1 METS-5-1-005 iss2.doc


Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B 107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.

All sockets to have a through hole for pin or ball retaining.

Photo:

r.

fr"l ~-·

1. Current Supplie r the respective Part Number listed

P~nA 1 nf 1

,Tool Specification And Validation Data Sheet

Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

Comment

r respective Part Numbers

Tool Specification And Valida'tion Data Sheet

Socket 1 /4" Square Drive - Bi-hex, Metric.

Professional quality sockets made from chrome alloy steel hardened, tempered and chrome

plated for corrosion protection.

Manufactured to DIN 3120/ISO 1174, DIN 3122/.SO 3315, DIN 3123/ISO 3316, DIN 3124/ISO

2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as

applicable.


Photo:

NSN Size (mm) Nominal length Part Number Comment (mm)

5120-99-13023 77 5.0 22.0

5120-99-13023 78 5.5 22.0

51 1302379 6.0 22.0

5120-99-1302380 7.0 22.0

5120-99-1302381 8.0 22.0

5120-99-1302382 9.0 22.0

5120-99-1302383 10.0 22.0

5120-99-1302384 11.0 22.0

5120-99-1302385 12.0 22.0

5120-99-1302386 13.0 22.0

5120-99-1302387 14.0 22.0

Note/Issue Remarks:

1.

http:3122/.SO


Socket 1 /4" Square Drive- Hex, Metric Professional quality sockets, made from chrome alloy steel hardened, tempered and chrome plated for corrosion,protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

NSN Size (mm) Part Number Comment

r""''--- A .-Z A


Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

1. er Part Numbers listed

P:=~nP 1 nf 1 AACTC t: -t r\-4 -4 :--1'\ _. __


Socket 1/4" Square Drive- Bi-Hex Deep, Metric sizes. Professional quality sockets made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

N 5120-99-1226996

5120-12-1206649

5120-99-9576872

5120-99-1391605

5120-99-7944213

5120-99-817 4353

5120-99-9201648

5120-99-6671511

5120-99-4457553

5120-99-327 4212

5120-99-3911158

5120-99-8119706

Note/Issue Remarks:

1. Current Supplier.

Size (mm) 4.0

5.0

5.5

6.0

7.0

8.0

9.0

10.0

11.0

12.0

13.0

14.0

't..,~.,

_.,.___ ...J

50.0

50.0

50.0

50.0

50.0

50.0

50.0

50.0

50.0

50.0

50.0

under the Part Numbers Listed

Page 1 of 1 METS-'i-1-111? '""1 rinr


Socket 1/4" Square Drive- Bi-hex, AF Professional quality sockets made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

Part Number Remarks

Page 1 of 1 MET5-5-l-013 lss6.doc


Socket 1/4" Square Drive- Bi-hex, Semi-deep, AF Professional quality sockets made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

NSN Size (in) Nominal length (mm) Part Number Comment

1. Current the Part Numbers listed

1. LLt!Lt

___


Professional quality sockets made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

Comment

r""'\ A_L.A


Professional quality sockets made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

Page 1 of 1 METS-5-1-0151ss5.doc


Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to Dl N 3120/ISO 117 4, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

-• .

Nominal length NSN Size (AF") Comment

Note/Issue Remarks:

1.

D~n~ 1 nf 1

Tool Specificatio-n And Validation Data Sheet

Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a hole for pin or ball retaining.

Photo:



Brief description: Socket 3/8 Square Drive- Bi- Hex Deep AF Professional quality sockets made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

NSN Size (AF") Comment

Note/Issue Remarks:

Current Supplier

Page 1 of 1 METS-5-2-005 Iss 3.doc


1.

Professional quality sockets and accessories, made from chrome alloy steel hardened,

tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174,

DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725,

ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.

All sockets to have a hole for pin or ball retaining.

Photo:

Comment

P~nP 1 nf 1


Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a hole for pin or ball retaining.

Photo:

Page 1 of 1 MET5-5-2-007.doc


Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

Nominal length NSN Size (mm) Comment

1. Current Supplier:



Professional quality sockets and accessories, made from ch_rome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a through hole for pin or ball retaining.

Photo:



Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B1 07, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

NSN Size (mm) Comments

\

1. the Part Numbers listed


Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a hole for pin or ball retaining.

Photo:

Page 1 of 1 METS·5·3·003.doc


Professional quality sockets and accessories, made from chrome Alloy steel hardened,

tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 117 4,




Photo:

Nominal length Comment

P;::~np 1 nf 1

1.


Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:



I hardened, tempered and chrome plated for

Brief description:

Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, ~ DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, . ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

NSN Size (ins) Comment

1. r Part Numbers listed

----------------------

._ '


steel hardened, tempered and finished in ate

Brief description:

Socket 1/2 Drive- Bi-Hex, Impact, Metric sizes Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and finished in black phosphate. Manufactured to DIN 3120/ ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a ring and pin safety ability.

Photo: Image shown may not be actual product but represents product

NSN Size (mm) Part Number Comments

1. r the Part Numbers listed above

P:=~n~=> 1 nf 1


Socket 1/2 Square Drive- Hex, for 14 mm Spark Plugs,


tempered and finished in black phosphate. Manufactured to DIN 3120/ISO 1174, DIN

3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI

8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.

All sockets to have a ring and pin safety ability

Photo:

5

NSN Hex Size (ins) Nominal length

(ins)

I • • ~ II I •

I

Comments

Note/Issue Remarks: II • • I I A ~~ I t• I.

• t ' • .. .... • .N•, ·~·~..-...


Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and finished with black phosphate. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.

Nominal length NSN Size (ins) Comments

Note/Issue Remarks:

1. Current Supplier Jlder the Part Numbers listed

o .... ,,.... ,...f 1 1


, tempered and black

Brief description:

Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and black phosphated. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.

All sockets to h

Nominal length NSN Size (mm) Comments

o~,Q 1 nf?


gthNSN Size{mm) Part Number Comments

~N~o~t~e~/ls_s_u_e~R~e-m-a-rk~s-:--~----------L-------------~ .__

1. Current Suppliers- '



Alloy steel hardened, tempered and black d.

Brief description:

Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and black phosphated. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable;


Photo: Image shown may not be actual product but represents product

Nominal length . . NSN Size (ins) Comments

5130-99-7660998 11/16

NoNSN 1-7/16

No NSN 1-1/2

No NSN 1 6


Note/Issue Remarks:

1. ~r the Part Numbers listed ~---



Specification No & DMC: M ETS/5/3/0 19 I DMC HTC5 Short Item Name: Socket 1/2 Drive - Bi- Hex, Metric sizes Proprietary Suppl.ier Details: Standards: See Description Materiai/Fi n ish: Chrome alloy steel hardened, tem_Q_ered and chrome plated Brief description:

Professional quality sockets and ac~=::~:~h~~;;,:·:fl~y steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

_,

...........-~""-"".. ..,.~

NSN Size (mm) Nominal length

(mm) Part Number Comments

5120-12-3687159 8 38 t 5120-12-3687156 9 38

5120-99-1302367 10 38 ~ 5120-99-434 7308 11 38

I f\l

I

5120-99-434 7309 12 38

5120-99-434731 0

5120-99-4347311

13

14

38

38

f ... -.

' I

5120~99-4347312

5120-99-434 7313

5120-99-1381 024

5120-99-434 7315

15

16

17

18

38

38

38

38

'• .,..i

!

5120-99-4347316 19 38 ! ~·

5120-99-434 7317

5120-99-4347318

5120-99-1387001

20

21

22

38

38

38 ~-T

, ---!

i;. 5120-99-1229402 23 38 .. 5120-99-1360942 24 38

w• .,.._ ~~A ...~- < ~ •.- ...

No NSN 25 38 I

5120-99-13 79002 26 42

5120-99-1381 025 27 43 ~'VifiE("~'~"'...........

5120-99-977 4617 28 44 .

5120-99-1229511 29 44 ... ,5120-99-1382897 30 44

Paqe 1 of 2

~~

METS-5-3-019 lss3.doc


NSN Size (mm) Part Number Comments

No NSN

5120-12-1235759 Note/Issue Remarks:

31

32

44 47

1. Current Supplien t Numbers listed

·r. ..r· r-.-"

• ~~,. ...... f :t ~ •

.... !

A•: ~~-· • -~ ... • • ~!~--~~. ,:. .... !,. ..

Page 2 of 2 METS-5-3-019 lss3.doc


Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a through hole for pin or ball retaining.

Photo:

Note/Issue Remarks:

1. Current supplier i '

P:=~nP 1 nf 1


Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion prote~tion. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B 107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

NSN Size (85-Whit) Nominal length Part Comments (mm) Number.

75

' 1. -··

METS-5-4-002 lss3.doc P:::~nP. 1 of 1


Chrome Alloy steel hardened, tempered and finished in black

Brief description:

Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and finished in black phosphate for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/180.3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

,,. •, .: '\ f.~: ~ .. .· ' r r---------------~--------------~------~~------~--.

1. Current supplie~ ·om their part numbers as listed.

~,.. . .•. . AI;

--


Specification No &DMC:

Short Item Name:

Proprietary Supplier Details:

Standards:

Material/Finish:

Brief description:

METS/5/4/006 j DMC HTCS Socket 3/4 Drive - Hex lm_p_act AF

.···~

See Descrip~ion Chrome Alloy steel hardened, tempered and finished in black phosphate

Professional quality sockets and accessories, made from Chrome Alloy steel hardened, tempered and finished in black phosphate. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B 107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.

All sockets to have a ring and pin safety ability.

Photo:

NSN

NoNSN

NoNSN

NoNSN

NoNSN

NoNSN

NoNSN

5130-00-2931411

5120-99-1377364

5120-99-1371434

5120-99-1377366

5120-99-1375722

5120~99-1375723 5120-99-1244139

5130-99-7731465

5130-99-7731466

5130-99-7731467

No NSN

5130-99-7731468

No NSN

NoNSN

5130-99-7731469

NoNSN

No NSN

NoNSN

NoNSN

No NSN

NoNSN

Size (AF") Nominal length (mm)

9/16 45

5/8 45

11/16 45

3/4 45

13/16 45

718 48

15/16 48

1.0 50

1-1/16 50

1-1/8 55

1-3/16 55

1-1/4 55

1-5/16 55

1-3/8 55

1-7/16 55

1-1/2 55

1-9/16 65

1-5/8 65

1-11/16 65

1-3/4 70

1-13/16 70

1-7/8 70

2.0 75

2-1/16 75

2-3/16 80

2-1/4 85

2-3/8 90

Page 1 of 2

Part Comments

Numbers

_l ' J-

1)i

..I ~ I

J

I

t ,..

i" -

I ~

,. ~ I.._-

METS-5-4-006 iss2.doc


Note/Issue Remarks:

1. Current Suppli< the Part Numbers listed

'I. ··;



Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered. Black Phosphate finish for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954~E, as applicable.

All sockets to have a ring and pin safety ability.

Photo:

1 . Current Supplier- · .1nder respective Part Numbers listed


Professional quality sockets and accessories, made from chrome Alloy steel tYclrdened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 117 4, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

Nominal length NSN Size (mm) Part Number Comments

Note/Issue Remarks:

1. Current Supplier- * '- under their respective Part Numbers

-~



Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 117 4, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

"-"":::~, •'

i 0 > ~

'·

1. Current supplier ·-rt Numbers Listed


Socket 3/4 Square Drive - Bi- Hex AF

Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 117 4, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a through hole for pin or ball retaining. ·

Photo:

NSN Nominal length (mm) Pt No -- ----i

51

-------1

70 1-13/16 73

1

1. Current supplier ~mder their part numbers listed


Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome platedfor corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725,. ASME/ANSI B 107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a through hole for pin or ball retaining.

Photo:

Note/Issue Remarks:

1. All sockets are available frorr'

Page 1 of 1 METS-5-4-0 13 Iss 2

' ..- ,,., !· • . ' -~" '


,,-

Socket 1" Drive - Bi- Hex AF





Supplied with locking pin.

Photo:

NominalNSN Size (AF") Part Number Comments

length (mm)

1. Current supplier- --a Part Numbers Listed


Material/Finish:

Brief description:

Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and corrosion resistant black finish. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable .

. All sockets to have a Ring and Pin safety facility

Photo:

Nominal length NSN Size (mm) Part Number Comments

Paae 1 of 2

--- - --lf---------1


gthNSN Size (mm) Part Number Comments

1. Current Supplier- j:)r the relevant part No's. --~-~ ~ ,.....----=--·--

w~;~~~, -;~~~~i;i~t:~:~··:

:.~£t;-;;t;__:~t-~~~

~~f~it:~1r

~~l

~~'~1~:~~:~~·)

:~;;~c~~~ij~~ ·-1' ~... 1.-~ _. .'C • • : ~;. ·:·

•• ·:: _.- "1'• .,

... :~·:t;t~~!-·1~.... ;:~('~·.

~;:;~::f~~;~;.~;, .

.::.)~;::s~~-~ .-; ·;)~.. -tt:r;- .~;~ ~

.·!-_~

·,



Chrome alloy steel hardened, tempered and a corrosion resistant black finish

Brief description:

Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and a corrosion resistant black finish. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.

~·All sockets to have a Ring and Pin safety ability.

Photo:

Part Number Comments

-+-----1

Note/Issue Remarks:

1 Current SL' ',I' ~der the Part Numbers Listed



Proprietary Supplier

Details:

Standards: DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316,

DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal GGG-W-641 SAE AS954-E

Material/Finish: Chrome Alloy steel hardened, tempered and corrosion resistant black finish

Brief description:

Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and corrosion resistant black finish. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.

All sockets to have a Ring and Pin safety facility

Photo:

NNSN Size (mm) Comments

1. lier



Tool Name: Crowfoot socket 1/2" Drive - Flare Nut, Bi-hex, AF

Specification:

Professional quality sockets and accessories, made from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/JSO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


NSN

5120-99-1242275

5120-00-2292773

5120-00-2292774

5120-00-1816759

5120-00-1816760

. 5120-00-1816757

5120-00-1816758

5120-00-1816755

5120-00-1816756

5120-00-1816753

5120-00-1816754

5120-00-1816751

5120-00-1816752

5120-00-1816749

5120-00-1816750

5120-00-1816747

NoNSN

5120-00-1848382

Size (ins)

1-1/16

1-1/8

1-3/16

1-1/4

1-5/16

1-3/8

1-7/16

1-1/2

1-9/16

1-5/8

1-11/16

1-3/4

1-13/16

1-7/8

1-15/16

2

2-1/8

2-3/16

Drive to Wrench surface centres (mm)

28

29

30

31

32

33

34

35

36

37

38

40

41

42

43

44

46

47


NSN

5120-00-1848385

5120-01-3487314

NoNSN

NoNSN

NoNSN

512o~oo-1848392

NoNSN

5120-00-1848396

-

"

Status

Size (ins)

2-1/4

2-3/8

2-7/16

2-9/16

2-5/8

2-11/16

2-314

3-1/8

Drive to Wrench surface centres (mm)

48

50

51

53

54

55

56

62

Authority Date Issued

9ffift eF Final 09/02/09-Remarks/Notes: Page 2 of 2 METS-5-6-001.doc


Crowfoot socket drive, Open Ended.

P~ofessional quality sockets and accessories, made from chrome alloy steel hardened,

tempered and chrome plated for corrosion P.rotection. Manufactured to DIN 3120/ISO 1174,

DIN 312?/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725; DIN 3129/ISO 2725,

ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.

All sockets to have a hole for Photo:

NSN Size (Ins)

i ! t ~ ~ ; ~ j< j ' f•' F ' ' ~ ~·

~' ' r~ ~it

i "t

'f ~

f, fr

f r~ :~ -}

t t

~--

~

t ?: -~

l l(

i• t'

f f~ tit W1

) ~\

c

f·' t,

~ • i ~

i ~~

)' i

> J. ' : "~

' >'

~ ~;

f ~

f

l•!

t d ~

lPage 1 of 2 METS-5-6-003 lss4.doc i I


NSN Size (Ins)



Crowfoot socket drive, Open Ended.




ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.

All sockets to have a

Photo:

Page 1 of 2 METS-5-6-0031ss6.doc


recommended working Torque

inlb

Page 2 of 2 METS-5·6-003 lss6.doc


Chrome alloy steel hardened, tempered and chrome plated for corrosion

Brief descri

Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

NSN Size (mm)

1.

Page 1 of 1 METS-S-6-005 iss2.doc

Tool Specification And Validation Data Sheet .

Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.


Photo:

NSN Size(mm) Comments

1.


Date post:	30-Jan-2021
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

Tool Specification And Validation Data Sheet · 2015. 5. 21. · Tool Specification And Validation...

Documents