Trade Price List - Hawk Heating Supplies · INTRODUCTION 02 For further information log onto...

Trade Price ListAugust 2010

TPL12 AUGUST 2010

EFFECTIVE: 1ST AUGUST 2010

Drainage & Water Supply

INTRODUCTION

For further information log onto www.polypipe.com02

General IntroductionWelcome to our new Trade Price List which has been created with you, the customer in mind andincludes details of our entire product range for above and below ground drainage and water supply asat 1st August 2010.

Polypipe Building Products is the UK’s leading manufacturer of above and below grounddrainage products. Our comprehensive product range is widely available throughplumbers and builders merchants nationally.

NEW PRODUCTS: A number of exciting new additions to the Civils Product range has beenintroduced in this issue, please see pages 36-39. You will also find that our Eco-vat Homerange has been updated and re-branded as Rainstream Home XL.

All new or updated items can be easily identified by the “NEW” symbol:

If you require a digital version of this Trade Price List please visit our website atwww.polypipe.com and click the “Downloads” button located on the left handpanel or alternatively, contact your local Polypipe representative.

Further information: For further product information or technical assistance pleasevisit our website at www.polypipe.com, contact your local Polypipe representativeor call our sales office on: 01709 770000.Due to our commitment to innovation and policy of ongoing product improvement, we reserve the right to vary the productsor specifications offered without notice.All products are subject to availability. E & O E

Polypipe Building Products is a registeredtrading division of Polypipe Limited.

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Ring Seal Soil & Vent .................................................4

System 2000 Solvent Soil & Vent..............................6

Universal Soil Fittings and Ancillaries......................8

WC Pan Connectors ...................................................8

Push-fit Waste System ...............................................9

Universal Compression Waste ................................10

Solvent Weld Waste System ...................................11

System 2000 Solvent Weld Waste..........................12

Waste Ancillaries......................................................12

Waste Traps...............................................................13

Condensate Drainage Traps ...................................16

21.5mm Pushfit Overflow System..........................17

21.5mm Solvent Weld Overflow System...............17

Overflow Ancillaries ................................................18

112 & 150mm Half Round Rainwater System ......18

75mm Half Round Rainwater System ...................19

112 x 65mm Square Section Rainwater System...20

117 x 75mm Polyflow Deep Capacity Gutter .......21

130 x 70mm Ogee Extra Capacity Gutter .............21

117 x 75mm Sovereign High Capacity Gutter ......22

Elegance - Half Round Cast Iron Effect .................22

Universal Rainwater Fittings & Adaptors..............23

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Underground Drain.................................................25

Access Fittings & Puddle Flanges............................27

Polycore and Polyrib Drainage...............................27

Anti-Splash Concrete Surrounds ............................28

Underground Drainage Adaptors .........................28

Settlement Fittings ..................................................29

Channel Components..............................................29

Inspection Chambers, Covers and Frames ............30

Underground Ancillaries.........................................32

Polysewer Gravity Sewer System............................32

SewerDrain Gravity Sewer System.........................34

Flexicon - Flexible Rubber Couplers and Adaptors............................................................35

Flexicon Reducing Bushes .......................................36

Polystorm Modular Water Storage .......................36

Rainstream Home XL ............................................37

General Purpose Duct System ................................37

Land Drainage Pipes & Couplers............................38

Twin Wall ..................................................................38

Ridgiduct...................................................................39

Ridgicoil & Polyduct.................................................39

Gullys and Channel Drainage.................................39

Ancillaries..................................................................39

Polyguard Barrier Pipe & Fittings...........................40

Geothermal Pipe & Fittings ....................................40

Water Service Pipes..................................................40

Polyfast Polyethylene Compression Fittings.........41

Electrofusion Fittings...............................................44

Water Supply Pipe and Fittings Ancillaries...........45

Above Ground Below Ground Miscellaneous

NEW

Loft Hatch .................................................................45

Miscellaneous ...........................................................45

Guide to Ordering Procedures ...............................46

General Trading Information .................................46

Terms & Conditions..................................................47

ABOVE GROUND PRODUCTS

For further information refer to www.polypipe.com 03

Above Ground ProductsPolypipe offers a comprehensive range of Above Ground Waste & Drainage products incorporating allnecessary systems required for the disposal and redistribution of waste water and rainwater.

Our PVCu soil and vent systems include ring seal and solvent weld options accompanied by a wide range of Kwickfit or solvent

weld WC pan connectors, air admittance valves and fire protection sleeves.

Our waste range is the most comprehensive available in the UK market with four different ranges and a complete range of

kitemarked waste traps.

For rainwater systems in PVCu we offer a choice of seven different profiles with five colour alternatives, providing a technical

solution with aesthetic alternatives for all residential and light commercial properties.

ELEGANCE RANGE: The Polypipe Elegance range is a stylish rangeof guttering and downpipe products with a decorative effect that

combines the look of a traditional cast-iron system with all of the

product benefits of using PVCc as the manufacturing material.

The result is a traditional looking, but modern and efficient,

rainwater system that has none of the degradation drawbacks of

cast iron installations.

KEY FEATURES & BENEFITS:• Supplied ready to fit without the need for painting or protective

coatings

• Quick to install, reducing total installation cost

• Durable and long-lasting finish without the need to apply

corrosion control

• Wide range of roof structure design solutions can be achieved

• Lightweight construction ensures easy handling, assembly and installation

• Elegance is suitable for both new build and residential renovation projects/retro fit installations.

For more information on Elegance please ask for brochure ref CIERS1,

visit www.polypipe.com, or contact your local Polypipe representative

COMPONENT PRODUCT SIZE LENGTH/ CODE COLOUR PACK BULK PRODUCT PRICEDESCRIPTION DESCRIPTION NO. QTY BAG/ GROUP EACH

PALLET CODE £GREY BLACK BROWN WHITE QTY(G) (B) (BR) (W)

RING SEAL SOIL & VENTPVCu BS4514:2001EN1329-1: 110 & 160mm

Plain End Pipe 3in/82mm 3.0m P330 • • 2 104 10E 30.124in/110mm 2.5m P425 • • • 2 60 10E 28.384in/110mm 3.0m P430 • • • • 2 60 10E 28.954in/110mm 4.0m P440 • • • • 2 60 10E 40.596in/160mm 3.0m P630 • 1 46 10E 82.956in/160mm 4.0m P640 • 1 46 10E 110.48

Single Socket 3in/82mm 3.0m SP330 • • 2 104 10E 29.85Pipe 4in/110mm 2.0m SP420 • • • 2 60 10E 25.58

4in/110mm 2.5m SP425 • • • 2 60 10E 31.164in/110mm 3.0m SP430 • • • • 2 60 10E 31.394in/110mm 4.0m SP440 • • • • 2 60 10E 43.096in/160mm 3.0m SP630 • 1 46 10E 83.416in/160mm 4.0m SP640 • 1 46 10E 108.51

Single Socket 3in/82mm SH33 • • 1 20 11M 6.434in/110mm SH43 • • • • 10 10 11M 6.376in/160mm SH643 • 1 10 11M 14.47

Double Socket 3in/82mm Remove centre stop for slip coupling SH34 • • 1 20 11M 10.174in/110mm Remove centre stop for slip coupling SH44 • • • • 10 10 11M 11.276in/160mm Remove centre stop for slip coupling SH644 • 1 10 11M 24.89

Pipe Clips 3in/82mm Pipe SC34 • • 10 100 11M 3.05(Plastic) 3in/82mm Socket SC35 • • 10 100 11M 3.05

3in/82mm Pipe (Saddle) SC33 • • 10 100 11M 2.773in/82mm Socket (Saddle) SC37 • • 10 100 11M 3.054in/110mm Pipe SC44 • • • • 10 50 11M 2.584in/110mm Socket SC45 • • • • 10 100 11M 2.824in/110mm Pipe (Saddle) SC43 • • • 10 50 11M 2.586in/160mm Pipe SC64 • 10 30 11M 3.36

Pipe Clips 3in/82mm To support horizontal pipework SHB31 1 1 11M 9.74(Metal) 3in/82mm SHB32 1 1 11M 31.05

4in/110mm To support horizontal pipework SHB41 1 1 11M 14.904in/110mm SHB42 1 1 11M 32.934in/110mm Pipe or Socket (Galv.) SM49 1 20 11M 4.614in/110mm Pipe (Galv.) inc. nut, bolt and backplate SM48 1 50 11M 4.654in/110mm Pipe (Coated) inc. nut, bolt and backplate SM47 • • 1 50 11M 7.084in/110mm Pipe (Galv.) inc. nut and bolt only SM42 1 50 11M 4.124in/110mm Pipe (Coated) inc. nut and bolt only SM41 • • 1 50 11M/13M 6.064in/110mm Drive in Spike (Galv.) use with SM41 & SM42 SM46 1 50 11M 2.034in/110mm Backplate (PVC) use with SM41 & SM42 RR154 • • • • 10 100 41M 1.066in/160mm To support horizontal pipework SHB61 1 1 11M 20.506in/160mm SHB62 1 1 11M 34.946in/160mm Pipe or Socket (Galv.) SM649 1 20 11M 9.716in/160mm Pipe or Socket (Coated) SM650 • 1 20 11M 11.74

Bend 3in/82mm 92½° SB309 • • 1 10 11M 13.83(Single Socket) 3in/82mm 135° SB312 • • 1 10 11M 13.83

4in/110mm 92½° SB409 • • • • 1 10 11M 15.174in/110mm 112½° SB411 • • • 1 10 11M 16.524in/110mm 135° SB412 • • • • 1 10 11M 15.176in/160mm 92½° SB609 • 1 5 11M 33.506in/160mm 135° SB612 • 1 10 11M 33.50

Bend 4in/110mm 92½° SB417 • • • • 1 10 11M 16.86(Double Socket) 6in/160mm 135° SB603 • 1 10 11M 40.58Offset Bend 135° 3in/82mm Double Socket SB303 • • 1 10 11M 13.44

4in/110mm Double Socket SB403 • • • • 1 10 11M 15.913in/82mm Socket/Spigot SB304 • • 1 20 11M 11.684in/110mm Socket/Spigot SB404 • • • • 1 10 11M 12.73

Adjustable Bend 4in/110mm 0-30° Polypropylene SAB30 • 1 10 11M 17.34(Ring Seal/Spigot) 4in/110mm 0-90° Polypropylene SAB90 • 1 10 11M 22.13

Single Branch 3in/82mm 92½° Equal (2 Boss) ST301 • • 1 10 11M 19.673in/82mm 135° Equal ST304 • • 1 10 11M 19.674in/110mm 92½° Equal (2 Boss) ST401 • • • • 1 10 11M 22.284in/110mm 104° Equal ST402 • • • • 1 10 11M 24.674in/110mm 112½° Equal ST403 • • • • 1 10 11M 24.674in/110mm 135° Equal ST404 • • • • 1 10 11M 24.674in/110mm 92½° Equal (4 Boss) ST414 • • • 1 10 11M 24.806in/160mm 92½° Equal (2 Boss) ST601 • 1 5 11M 65.36

Unequal Single 6in/160mm 92½° Unequal 160 x 160 x 110mm ST604 • 1 5 11M 47.53Branch 6in/160mm 135° Unequal 160 x 160 x 110mm ST606 • 1 5 11M 52.34

SC34SC35

SM46

SAB30 SAB90

Single Socket

Double Socket

SM48SM47

SC44

SC33SC37SC43SC45

RR154

SM42SM41

SHB31SHB41SHB61

SHB32SHB42SHB62

SM49SM649SM650


Prices shown are for one item excluding VAT 05

Universal

Universal

Universal

EN1455-1, EN1329-1

SA343 SA636

SG30SG40

SG70SG16

SD34SD664

SD46

SD101 SO65



RING SEAL SOIL & VENTPVCu BS4514:2001EN1329-1: 110 & 160mm

Double Branch 4in/110mm 92½° (Only use in vertical position) SU420 • • • • 1 10 11M 46.204in/110mm 112½° (Only use in vertical position) SU422 • • • 1 5 11M 55.71

Corner Branch 4in/110mm Triple Socket (Fabricated) RCB104 • • • • 1 5 11M 96.1792½°

Boss Pipe 4in/110mm Requires Boss Adaptor SJ454 • • • • 1 10 11M 10.14

Short Boss Pipe 4in/110mm Double solvent socket requires boss adaptor SE60 • • • • 1 10 11M 3.87

Strap Boss 3in/82mm Back fix nut & bolt SG30 • • 10 50 11M 4.56(Open) 4in/110mm Back fix nut & bolt SG40 • • • • 10 50 11M 4.24

4in/110mm Side fix clip requires boss adaptor SG70 • • • • 10 50 11M 4.246in/160mm Side fix clip requires boss adaptor SG16 • 1 50 11M 12.63

Boss Adaptor 32mm SN32 • 10 200 11M 1.99(Push-fit rubber) 40mm SN40 • 10 200 11M 1.99

50mm SN50 • 1 500 11M 2.14Straight Adaptor 32mm SN63 • • • • 1 10 11M 2.95(Solvent/ 40mm SN64 • • • • 1 10 11M 2.95Compression) 50mm SN65 • • • • 1 10 11M 4.02Angled Adaptor 32mm SN66 • • • 1 10 11M 2.9592½° (Solvent/ 40mm SN67 • • • 1 10 11M 3.24Compression) 50mm SN68 • • • 1 10 11M 4.02Solvent Adaptor 32mm SW80 • • • • 10 100 11M 2.67for ABS/MuPVC 40mm SW81 • • • • 10 100 11M 2.43Pipe only 50mm SW82 • • • • 10 100 11M 2.87Access Pipe 3in/82mm 2 Boss SA343 • • 1 10 11M 17.44(Single Socket) 4in/110mm 3 Boss SA43 • • • • 1 10 11M 22.97

6in/160mm SA643 • 1 5 11M 54.20

Access Bend 4in/110mm Single Socket SB413 • • • • 1 10 11M 34.6092½° 3in/82mm Double Socket SB313 • • 1 10 11M 21.46

Access Branch 4in/110mm 92½° (4 Boss) ST410 • • • • 1 5 11M 39.984in/110mm 112½° ST412 • • • 1 5 11M 44.63

Access Saddle 3in/82mm SA34 • • 1 50 11M 8.154in/110mm SA44 • • • 1 25 11M 12.34

Access Plug 3in/82mm Screwed/Spigot Tail SA52 • • 1 10 11M 11.20Access Plug 4in/110mm Screwed/Spigot Tail SA62 • • • • 1 10 11M 11.37Access Cap 4in/110mm Screwed/Socket Tail SA63 • • • • 1 10 11M 12.06Socket Plug 3in/82mm SH36 • • 1 10 11M 6.91

4in/110mm SH46 • • • • 10 50 11M 6.906in/160mm SH666 • 1 5 11M 12.51

Reducers 3in/82mm To 50mm Waste SD101 • • 5 25 11M 8.834in/110mm Waste concentric requires boss adaptor SO65 • • • • 1 25 11M 8.254in/110mm To 82mm Soil SD34 • • • 1 10 11M 11.614in/110mm To 68mm Rainwater SD46 • • • • 1 25 51M 5.766in/160mm To 110mm Soil SD664 • 1 25 11M 19.08

Drain Connector 3in/82mm SD33 • • 1 20 11M 8.584in/110mm SD43 • • • 1 10 11M 7.97

Internal Drain 4in/110mm Polypropylene SK40 • • • 10 10 17M 6.07Connector


SYSTEM 2000 SOLVENT SOIL & VENT PVCu BS4514:2001EN1329-1: 110 & 160mm

SC34SC35

SC44

SC33SC37SC43SC45

SCB105 SCB106

SM46

SM48SM47

RR154

SM42SM41

SHB31SHB41SHB61

SHB32SHB42SHB62

SM49SM649SM650


SOLV. PALLET CODE £GREY BLACK BROWN WHITE QTY(SG) (B) (BR) (W)

Plain End Pipe 3in/82mm 3.0m P330 • • 2 104 10E/12E 30.124in/110mm 3.0m P430 • • • 2 60 10E/12E 28.954in/110mm 4.0m P440 • • • 2 60 10E/12E 40.596in/160mm 3.0m P630 • 1 46 10E/12E 82.956in/160mm 4.0m P640 • 1 46 10E/12E 110.48

Pipe Coupler 3in/82mm Solvent Socket SWH49 • • 1 50 13M 4.794in/110mm Solvent Socket SWH16 • • • 1 50 13M 5.796in/160mm Solvent Socket SWH64 • 1 20 13M 16.34

Double Socket 3in/82mm Remove centre stop for slip coupling SH34 • • 1 10 11M/13M 10.17(inc. Ring Seals) 4in/110mm Remove centre stop for slip coupling SH44 • • • 10 10 11M/13M 11.27

6in/160mm Remove centre stop for slip coupling SH644 • 1 10 11M/13M 24.98Pipe Clips 3in/82mm Pipe SC34 • • 10 100 11M 3.05(Plastic) 3in/82mm Socket SC35 • • 10 100 11M/13M 3.05

3in/82mm Pipe (Saddle) SC33 • • 10 100 11M/13M 2.773in/82mm Socket (Saddle) SC37 • • 10 100 11M/13M 3.054in/110mm Pipe SC44 • • • 10 50 11M 2.584in/110mm Socket SC45 • • • 10 100 11M 2.824in/110mm Pipe (Saddle) SC43 • • • 10 50 11M 2.586in/160mm Pipe SC64 • 10 30 11M 3.36

Pipe Clips 3in/82mm To support horizontal pipework SHB31 1 1 11M 9.74(Metal) 3in/82mm SHB32 1 1 11M 31.05

4in/110mm To support horizontal pipework SHB41 1 1 11M 14.904in/110mm SHB42 1 1 11M 32.934in/110mm Pipe or Socket (Galv.) SM49 1 20 11M 4.614in/110mm Pipe (Galv.) inc. nut, bolt and backplate SM48 1 50 11M 4.654in/110mm Pipe (Coated) inc. nut, bolt and backplate SM47 • • 1 50 11M 7.084in/110mm Pipe (Galv.) inc. nut and bolt only SM42 1 50 11M 4.124in/110mm Pipe (Coated) inc. nut and bolt only SM41 • • 1 50 11M/13M 6.064in/110mm Drive in Spike (Galv.) use with SM41 & SM42 SM46 1 50 11M 2.034in/110mm Backplate (PVC) use with SM41 & SM42 RR154 • • • • 10 100 41M 1.066in/160mm To support horizontal pipework SHB61 1 1 11M 20.506in/160mm SHB62 1 1 11M 34.946in/160mm Pipe or Socket (Galv.) SM649 1 20 11M 9.716in/160mm Pipe or Socket (Coated) SM650 • 1 20 11M 11.74

Bend 3in/82mm 92½° SWB71 • • 1 20 13M 11.86(Double Socket) 3in/82mm 135° SWB48 • • 1 50 13M 11.86

4in/110mm 92½° SWB22 • • • 1 20 13M 13.394in/110mm 112½° SWB23 • • • 1 20 13M 14.354in/110mm 135° SWB18 • • • 1 20 13M 13.396in/160mm 92½° SWB92 • 1 5 13M 31.386in/160mm 135° SWB95 • 1 10 13M 34.55

Bend 3in/82mm 135° SB304 • • 1 20 11M/13M 11.68(Socket/Spigot) 4in/110mm 112½° SWB24 • • • 1 20 13M 13.37

4in/110mm 135° SB404 • • • 1 10 11M/13M 12.734in/110mm 90° Close Couple SWB47 • • • 1 20 13M 11.90

Single Branch 4in/110mm 92½° (4 Boss Shoulders) SWT28 • • • 1 10 13M 17.18(Double Socket)

Single Branch 3in/82mm 92½° SWT73 • • 1 10 13M 16.52(Triple Socket) 4in/110mm 92½° Short Branch SWT29 • • • 1 10 13M 11.77

4in/110mm 104° SWT35 • • • 1 10 13M 20.224in/110mm 135° SWT37 • • • 1 10 13M 18.364in/110mm 92½° (4 Boss) SWT26 • • • 1 10 13M 17.186in/160mm 92½° SWT93 • 1 5 13M 59.566in/160mm 135° SWT91 • 1 5 13M 68.34

Unequal Single 6in/160mm 92½° (160 x 160 x 110mm) SWT94 • 1 5 13M 51.73Branch 6in/160mm 135° (160 x 160 x 110mm) SWT97 • 1 5 13M 49.72(Triple Socket)

Equal Single 4in/110mm 3 Boss Socketed Base SWTE51 • 1 5 13M 50.88Branch

Equal Single 4in/110mm 3 Boss Spigot Base SWTE50 • 1 5 13M 50.88Branch

Corner Branch 4in/110mm Triple Socket SCB105 • • • 1 5 13M 103.3592½° 4in/110mm Quadruple Socket SCB106 • • • 1 5 13M 109.79

Double Branch 4in/110mm 112½° (Ring Seal - use in vertical position) SU422 • • • 1 5 11M/13M 55.71(Triple Socket/ 4in/110mm 87½° (only use in the vertical position) SWU423 • • • 1 10 11M 47.76Spigot)


SYSTEM 2000 SOLVENT SOIL & VENT PVCu BS4514:2001EN1329-1: 110 & 160mm

DOUBLE SOCKET

DOUBLE

SOCKET

SG30 SG70

SINGLE SOCKET

SINGLE

SOCKET

DOUBLE SOCKET

SINGLE SOCKET

DOUBLE SOCKET

SINGLE SOCKET

Solvent Waste only

DO NOT SOLVENT WELD



Double Branch 4in/110mm 87½° (only use in the vertical position) SWU424 • • • 1 10 11M/13M 49.72(Four Socket)

Ring Seal 3in/82mm Rubber seal & polypropylene cap SWE98 • • • 1 10 13M 2.67Adaptor 4in/110mm Rubber seal & polypropylene cap SWE99 • • • 1 10 13M 2.07

6in/160mm Rubber seal & polypropylene cap SWE61 • • • 1 10 13M 6.62Single Boss 4in/110mm Double Socket 32mm BP420 • • • 1 20 13M 5.69Pipe 4in/110mm Single Socket 32mm BP421 • • • 1 20 13M 5.69

4in/110mm Double Socket 40mm BP422 • • • 1 20 13M 5.694in/110mm Single Socket 40mm BP423 • • • 1 20 13M 5.694in/110mm Double Socket 50mm BP424 • • • 1 20 13M 5.694in/110mm Single Socket 50mm BP425 • • • 1 20 13M 5.69

Three Way 4in/110mm Single Socket SWE59 • • • 1 20 13M 6.56Bossed Pipe 4in/110mm Double Socket SWE60 • • • 1 20 13M 5.51

Strap Boss - 3in/82mm Back fix Nut & Bolt SG30 • • 10 50 11M/13M 4.56Requires 4in/110mm Back fix Nut & Bolt SG40 • • • 10 50 11M/13M 4.24Adaptor 4in/110mm Side fixing clip SG70 • • • 10 50 11M/13M 4.24

6in/160mm Side fixing clip SG16 • 1 50 11M/13M 12.63Boss Adaptor - 32mm EN1455-1, EN1329-1 SW80 • • • • 10 100 11M/13M 2.67Solvent (ABS/ 40mm EN1455-1, EN1329-1 SW81 • • • • 10 100 11M/13M 2.43MuPVC - Pipe Only) 50mm EN1455-1, EN1329-1 SW82 • • • • 10 100 11M/13M 2.87Boss Adaptor - 32mm SN32 • • • 10 200 11M/13M 1.99Push-Fit 40mm SN40 • • • 10 200 11M 1.99Universal (Rubber) 50mm SN50 • • • 1 500 11M 2.14Access Pipe 3in/82mm Single Socket - 2 Boss Shoulders SWA39 • • 1 10 13M 19.58

3in/82mm Double Socket - 2 Boss Shoulders SWA31 • • 1 10 13M 19.584in/110mm Single Socket - 4 Boss Shoulders SWA53 • • • 1 10 13M 26.604in/110mm Double Socket - 4 Boss Shoulders SWA43 • • • 1 10 13M 24.16

Short Access 4in/110mm Single Socket SWA88 • • • 1 10 13M 18.41Pipe 4in/110mm Double Socket SWA44 • • • 1 10 13M 17.59

6in/160mm Double Socket SWA63 • 1 10 13M 55.83

Access Bend 3in/82mm 92½° SWA92 • • 1 10 13M 16.21(Double Socket) 4in/110mm 92½° SWA87 • • • 1 10 13M 29.37

Access Branch 4in/110mm SWA09 • 1 10 13M 38.7292½°(Triple Socket)

Access Saddle 3in/82mm SA34 • • 1 50 11M/13M 8.154in/110mm SA44 • • • 1 25 11M/13M 12.34

Screwed Access Plug 3in/82mm Spigot Tail SA52 • • 1 10 11M/13M 11.20Screwed Access Plug 4in/110mm Spigot Tail SA62 • • • 1 10 11M/13M 11.37Screwed Access Cap 4in/110mm Solvent/Spigot Tail SA63 • • • 1 10 11M/13M 12.06

Socket Plug 3in/82mm SH36 • • 1 10 11M/13M 6.914in/110mm SH46 • • • 10 50 11M/13M 6.906in/160mm SH666 • 1 5 11M/13M 12.51

Reducer 4in/110mm to 82mm SWD96 • • • 1 50 13M 8.68(Socket/Spigot) 6in/160mm to 110mm SWD69 • 1 50 13M 17.99

Reducer 4in/110mm to 82mm SWD13 • • • 1 50 13M 9.55(Double Socket)

Reducer to 4in/110mm Requires Boss Adaptor SO65 • • • 1 25 11M/13M 8.25Waste

Trapped Floor 4in/110mm Complete Unit PFG100 1 10 11M 29.15Gully 82/50mm 4in/110mm Body Only PFG100A 1 10 11M 24.79Outlet 4in/110mm 150 x 150mm PVC Tile and Locking Strainer PFG101 1 25 11M 7.75Internal Drain 4in/110mm Polypropylene SK40 • • • • 10 10 17M 6.07Connector



SOLV. PALLET CODE £GREY GREY BLACK BROWN WHITE QTY(SG) (G) (B) (BR) (W)


SOLV. PALLET CODE £GREY GREY BLACK BROWN WHITE QTY(SG) (G) (B) (BR) (W)

Kwickfit 4in/110mm Polypropylene SK40 • • • • 10 10 17M 6.07Straight

Kwickfit 90° 'S' 4in/110mm Polypropylene SK42 • 10 10 17M 7.65(225mm Leg)

Kwickfit Swan 4in/110mm Polypropylene SNK12 • 1 10 17M 13.10Neck 90° (Set-backfor tight spaces)

Kwickfit 104° 'P' 4in/110mm Polypropylene SK44 • 10 10 17M 6.50

Kwickfit Swivel 4in/110mm Polypropylene SK56 • 10 10 17M 8.010-30°

Kwickfit Offset 4in/110mm Polypropylene SK52 • 10 10 17M 6.50(40mm)

UNIVERSAL SOIL FITTINGS AND ANCILLARIES EN1329-1:100 & 160mm PVCu

WC PAN CONNECTORS POLYPROPYLENE (DO NOT SOLVENT WELD POLYPROPYLENE) BS5627

BBA BRITISHBOARD OFAGRÉMENT

CERTIFICATE No. 09/4650

SV3282mm

Soil Manifold - 4in/110mm Accepts up to 4x32mm or 40mm Waste MAN 5 • 1 1 11M 25.37(Polypropylene) Inlets For 50mm connections, cut to

template and use MAN7 seal

MAN7 Seal 50mm MAN 7 • 1 1 11M 0.83

Push-Fit Bend 50mm 91¼° MAN 8 • 2 50 11M 2.42

Vent Cowl 4in/110mm SCV40 • • • • • 1 10 11M/13M 18.51

Vent Terminal 3in/82mm Polypropylene (do not Solvent Weld) SV32 • • • 1 10 11M/13M 3.404in/110mm PVC SV42 • • • • • 10 50 11M/13M 3.266in/160mm PVC SV62 • • 1 50 11M/13M 8.78

Weathering 3in/82mm SV38 • • • 1 10 11M/13M 4.19Apron 4in/110mm SV48 • • • • • 10 50 11M/13M 4.32

6in/160mm SV68 • • 1 50 11M/13M 10.14Weathering Slate 82 & 110mm 457 x 457 Angled SV457 1 20 11M 32.54(Rubber and 82 & 110mm 610 x 610 Angled SV610 1 10 11M 45.16Aluminium) 82 & 110mm 610 x 457 Angled SV645 1 10 11M 41.24

82 & 110mm 400 x 400 Flat SH400 1 20 11M 28.50

Air Admittance 3in/82mm PVCu Solvent Socket. Can be used externally SPV82 • • 1 10 15M 43.81Valve 4in/110mm PVCu Solvent Socket. Can be used externally SPV110 • • • • 1 10 15M 43.81

Fire Protection 55mm 4 Hour Fire Rating FPS55/4 1 1 19M 35.10Sleeve (Metal) 82mm 4 Hour Fire Rating FPS82/4 1 1 19M 43.94

110mm 4 Hour Fire Rating FPS110/4 1 1 19M 48.03160mm 4 Hour Fire Rating FPS160/4 1 1 19M 81.62

Silicone Grease 100gm Screw Top Jar SG100 100 89M 9.18Aerosol Lubricant 400ml SG300 12 89M 15.26Cleaning Fluid 250ml Tin CF250 10 89M 7.72Solvent Cement 125ml c/w Brush SC125 20 89M 7.08(BS6209) 250ml c/w Brush SC250 10 89M 10.79

500ml SC500 10 89M 19.55

Gap Filling 140gm Tube Clear GFC100 10 89M 9.18

Cement






WC PAN CONNECTORS POLYPROPYLENE (DO NOT SOLVENT WELD POLYPROPYLENE) BS5627

PUSH-FIT WASTE SYSTEM POLYPROPYLENE (DO NOT SOLVENT WELD POLYPROPYLENE) EN1451-1

Waste Pipe 32mm 3m WP11 • • • • 10 500 20E 3.5540mm 3m WP12 • • • • 10 400 20E 4.3950mm 3m WP51 • • 5 225 20E 7.71

Straight 32mm WP25 • • • • 10 100 21M 1.33Coupling 40mm WP26 • • • • 10 100 21M 1.28

50mm WP58 • • 10 50 21M 2.42Pipe Clip 32mm WP33 • • • • 50 500 21M 0.39

40mm WP34 • • • • 50 500 21M 0.4350mm WP65 • • 50 500 21M 0.72

Knuckle Bend 32mm WP15 • • • • 10 100 21M 1.2290° 40mm WP16 • • • • 10 100 21M 1.22

50mm WP64 • • 5 50 21M 2.42Swept Bend 32mm WP13 • • • • 10 100 21M 1.3391¼° 40mm WP14 • • • • 10 100 21M 1.33

50mm WP52 • • 5 50 21M 2.42

Obtuse Bend 32mm WP17 • • • • 10 100 21M 1.2245° 40mm WP18 • • • • 10 100 21M 1.22

50mm WP54 • • 10 50 21M 2.42Soil Boss 32mm WP19 • • • • 5 100 21M 1.33Bend 157½° 40mm WP20 • • • • 5 100 21M 1.47

Kwickfit Offset 4in/110mm Polypropylene SK46 • 10 10 17M 6.21(12mm)

Kwickfit 4in/110mm Polypropylene SK48 • 10 10 17M 6.75ExtensionPiece (200mm)Kwickfit Long 4in/110mm Polypropylene SK50 • 10 10 17M 9.1690° 'S'(390mm Leg)

Kwickfit 90° 4in/110mm 32mm boss SK49 • 10 10 17M 19.77Connector Polypropylene(110mm Leg)

Kwickfit Flexible 4in/110mm Polypropylene SK54 • 10 10 17M 31.98Connector (580mm)

Pancon Straight 4in/110mm Polypropylene SWC40 • 1 50 17M 5.71

Pancon 90° 'S' 4in/110mm Polypropylene SWC42 • 1 20 17M 6.50

Pancon 104° 'P' 4in/110mm Polypropylene SWC44 • 1 10 17M 5.71

Pancon Offset 4in/110mm Polypropylene SWC52 • 1 10 17M 5.71(40mm)

0-30° Pan 4in/110mm Polypropylene SWC56 • 1 10 17M 6.50Connector (Spigot)Solpan Straight 4in/110mm PVCu PVC427 • 1 10 17M 7.25(Solvent Weld

Socket)

Solpan Straight 4in/110mm PVCu PVC428 • 1 10 17M 7.25(Solvent Weld

Spigot)

Solpan 90° 'S' 4in/110mm PVCu PVC429 • 1 10 17M 11.37(Solvent Weld

Socket)

Solpan 90° 'S' 4in/110mm PVCu PVC430 • 1 10 17M 11.37(Solvent Weld

Spigot)

Solvent Weld 4in/110mm PVCu PVC423 • 1 10 17M 31.98FlexibleConnector(580mm)




UNIVERSAL COMPRESSION WASTE POLYPROPYLENE (DO NOT SOLVENT WELD POLYPROPYLENE)

PUSH-FIT WASTE SYSTEM POLYPROPYLENE (DO NOT SOLVENT WELD POLYPROPYLENE) EN1451-1

Fittings acceptEN1451-1 & EN1455-1EN1329-1 Copper Pipe



Wastepipe 32mm 2m PS50 • 10 400 26E 2.7140mm 2m PS60 • 10 400 26E 3.3232mm 3m WP11 • • 10 500 20E 3.5540mm 3m WP12 • • 10 400 20E 4.39

Straight 32mm PS32 • 10 100 27M 1.98Connector 40mm PS40 • 10 100 27M 2.05Pipe Clip 32mm WP33 • • 50 500 21M 0.39

40mm WP34 • • 50 500 21M 0.43Knuckle Bend 90° 32mm PS15 • 10 100 27M 2.15

40mm PS16 • 10 100 27M 2.15

Obtuse Bend 45° 32mm PS17 • 10 100 27M 2.2040mm PS18 • 10 100 27M 2.26

Swivel Elbow 90° 32mm SE1 • 10 100 27M 1.6140mm SE2 • 10 100 27M 1.75

Swivel Bend 45° 32mm PS19 • 10 100 27M 1.9440mm PS20 • 10 100 27M 2.09

Equal Tee 91¼° 32mm PS21 • 10 50 27M 2.9540mm PS22 • 10 50 27M 3.07

Reducer 40mm Reduces to 32mm PS38 • 10 100 27M 2.15

Connector to 32mm WS67 • 10 100 27M 1.92Solvent Socket 40mm WS68 • 10 100 27M 2.05ABSWaste Pipe 32mm WP47 • 10 10 27M 1.33Shroud 40mm WP48 • 10 10 27M 1.33Coupler Adaptor 40mm Remove nut for Adaptor WT70 • 10 100 27M 2.52

Swept Tee 91¼° 32mm WP21 • • • • 10 50 21M 1.3340mm WP22 • • • • 10 50 21M 1.2250mm WP56 • • 5 30 21M 2.42

Swivel Bend 32mm WP23 • • • • 10 100 21M 1.2291¼° 40mm WP24 • • • • 10 100 21M 1.22

50mm MAN 8 • 2 50 11M 2.42Reducer 32mm From 40mm WP27 • • • • 10 100 21M 1.28

32mm From 50mm WP70 • • • • 10 100 21M 2.4240mm From 50mm WP59 • • • • 10 100 21M 2.42

Threaded 32mm WP31 • • • • 10 100 21M 1.33Coupling 40mm WP32 • • • • 10 100 21M 1.33(BSP Female)

Tank Connector 32mm WP35 • • • • 10 100 21M 1.4740mm WP36 • • • • 10 100 21M 1.33

Screwed Access 32mm WP43 • • • • 10 100 21M 1.33Plug 40mm WP44 • • • • 10 100 21M 1.33

Socket Plug 32mm WP29 • • • • 10 100 21M 1.3340mm WP30 • • • • 10 100 21M 1.3350mm WP72 • • 10 100 21M 2.42

Waste Pipe 32mm WP47 • 10 10 21M 1.33Shroud 40mm WP48 • 10 10 21M 1.33

Vent Terminal 50mm WP66 • • 10 100 21M 2.42

Universal Waste 32mm Fits EN1451-1 & EN1455-1, UWC32 • • 10 100 21M 1.52Coupler 40mm EN1329-1 Plastic, UWC40 • • 10 100 21M 1.61

50mm Metric & Copper pipe UWC50 • • 10 100 21M 2.05


SOLVENT WELD WASTE SYSTEM A.B.S. EN1455-1



Wastepipe 32mm 3m WS11 • • • • 10 500 22E 6.8540mm 3m WS12 • • • • 10 300 22E 8.3850mm 3m WS51 • • • • 5 225 22E 10.63

Straight 32mm WS25 • • • • 10 100 23M 1.25Coupling 40mm WS26 • • • • 10 100 23M 1.34

50mm WS58 • • • • 10 100 23M 2.23Pipe Clip 32mm WS33 • • • • 50 500 23M 0.40

40mm WS34 • • • • 50 500 23M 0.43WS65 • • • • 50 500 23M 0.72

Swept Bend 32mm WS13 • • • • 10 100 23M 1.3492½° 40mm WS14 • • • • 10 100 23M 1.34

50mm WS52 • • • • 10 50 23M 2.23

Knuckle Bend 32mm WS15 • • • • 10 100 23M 1.3490° 40mm WS16 • • • • 10 100 23M 1.34

50mm WS64 • • • • 10 50 23M 2.23

Obtuse Bend 32mm WS17 • • • • 10 100 23M 1.3445° 40mm WS18 • • • • 10 100 23M 1.34

50mm WS54 • • • • 10 50 23M 2.23

Swivel Bend 32mm WS23 • • • • 10 100 23M 1.3492½° 40mm WS24 • • • • 10 100 23M 1.34

50mm WS60 • • • • 10 50 23M 2.23

Spigot Bend 45° 32mm WS48 • • • • 10 100 23M 1.4840mm WS49 • • • • 10 100 23M 1.4850mm WS66 • • • • 10 50 23M 2.23

Swept Tee 92½° 32mm WS21 • • • • 10 100 23M 1.4840mm WS22 • • • • 10 100 23M 1.3450mm WS56 • • • • 10 50 23M 2.23

Cross Tee 92½° 40mm WS38 • • • • 1 10 23M 1.7650mm WS50 • • • • 5 25 23M 2.23

Junction 45° 32mm WS39 • • • • 1 10 23M 1.4840mm WS40 • • • • 1 10 23M 1.4850mm WS53 • • • • 5 25 23M 2.23

Reducer 32mm From 40mm WS28 • • • • 10 100 23M 1.2532mm From 50mm WS202 • • • • 10 100 23M 2.2040mm From 50mm WS59 • • • • 10 100 23M 2.10

Expansion 32mm WS61 • • • • 10 100 23M 1.48Coupling 40mm WS62 • • • • 10 100 23M 1.48

50mm WS63 • • • • 10 100 23M 2.46

Threaded 32mm WS31 • • • • 10 100 23M 1.48Coupling 40mm WS32 • • • • 10 100 23M 1.48(BSP Female)

Adaptor 32mm WS46 • • • • 10 100 23M 1.48(Male Iron) 40mm WS47 • • • • 10 100 23M 1.48

50mm WS57 • • • • 10 100 23M 2.23Tank Connector 32mm WS35 • • • • 10 100 23M 1.48

40mm WS36 • • • • 10 100 23M 1.48

Screwed Access 32mm WS29 • • • • 10 250 23M 1.48Plug 40mm WS30 • • • • 10 250 23M 1.48

50mm WS72 • • • • 5 225 23M 2.23

Socket Plug 32mm WS44 • • • • 10 100 23M 1.4840mm WS45 • • • • 10 100 23M 1.4850mm WS55 • • • • 10 100 23M 2.23




SYSTEM 2000 SOLVENT WELD WASTE MuPVC EN1566-1PipeEN1329-1Fittings



WASTE ANCILLARIES

Do not solvent weld

Anti Syphon 32mm ABS Solvent Spigot to EN1455-1 PVS32 • 1 10 15M 3.39Unit 40mm ABS Solvent Spigot to EN1455-1 PVS40 • 1 10 15M 3.39

50mm ABS Solvent Spigot to EN1455-1 PVS50 • 1 10 15M 4.0332mm ABS Push Fit Spigot to EN1451-1 VWP32 • 1 10 15M 3.3940mm ABS Push Fit Spigot to EN1451-1 VWP40 • 1 10 15M 3.3950mm ABS Push Fit Spigot to EN1451-1 VWP50 • 1 10 15M 4.03

Universal 32mm Extends to 1m FW11 • 1 10 21M 5.31Flexible waste 40mm Extends to 1m FW12 • 1 10 21M 5.54Fitting

Wastepipe 32mm 3m MU103 • • • 10 500 24E 9.5240mm 3m MU203 • • • 10 350 24E 11.0050mm 3m MU303 • • • 5 225 24E 16.9732mm 4m MU101 • • • 10 500 24E 12.1440mm 4m MU201 • • • 10 350 24E 14.6450mm 4m MU301 • • • 5 225 24E 21.64

Straight 32mm MU110 • • • 10 100 25M 1.67Coupling 40mm MU210 • • • 10 100 25M 1.67

50mm MU310 • • • 10 100 25M 2.29Pipe Clip 32mm WP33 • • • 50 500 21M 0.39(Polypropylene) 40mm WP34 • • • 50 225 21M 0.43

50mm WP65 • • • 50 500 21M 0.72Swept Bend 32mm MU114 • • • 10 100 25M 1.6992½° 40mm MU214 • • • 10 100 25M 1.77

50mm MU314 • • • 10 50 25M 2.33Knuckle Bend 32mm MU112 • • • 10 100 25M 1.7790° 40mm MU212 • • • 10 100 25M 1.80

50mm MU312 • • • 10 50 25M 2.44Obtuse Bend 32mm MU113 • • • 10 100 25M 1.6945° 40mm MU213 • • • 10 100 25M 1.77

50mm MU313 • • • 10 50 25M 2.33Conversion 32mm MU121 • • • 10 100 25M 1.88Bend 90° 40mm MU221 • • • 10 100 25M 1.88

50mm MU321 • • • 10 50 25M 2.44Spigot Bend 45° 32mm MU105 • • • 10 100 25M 1.88

40mm MU205 • • • 10 100 25M 1.8850mm MU305 • • • 10 50 25M 2.44

Swept Tee 92½° 32mm MU116 • • • 10 100 25M 1.7740mm MU216 • • • 10 100 25M 1.7750mm MU316 • • • 10 50 25M 2.44

Cross Tee 92½° 50mm MU315 • • • 5 25 25M 3.65

Branch 45° 32mm MU117 • • • 10 100 25M 1.9040mm MU217 • • • 10 100 25M 1.9050mm MU317 • • • 10 50 25M 2.61

Expansion 32mm MU120 • • • 10 100 25M 1.88Coupling 40mm MU220 • • • 10 100 25M 1.88

50mm MU320 • • • 10 100 25M 2.69Reducer 32mm From 40mm MU111 • • • 10 100 25M 1.67

32mm From 50mm MU211 • • • 10 100 25M 2.2340mm From 50mm MU311 • • • 10 100 25M 2.23

Socket x Male 32mm MU122 • • • 10 100 25M 1.88Iron BSP 40mm MU222 • • • 10 100 25M 1.88Connector 50mm MU322 • • • 10 100 25M 2.44Screwed 32mm MU119 • • • 10 100 25M 1.76Access Plug 40mm MU219 • • • 10 100 25M 1.77

50mm MU319 • • • 10 100 25M 2.44




WASTE TRAPS POLYPROPYLENE

38mm 75mm

38mm 75mm

38mm 75mm

BS3943

WASTE ANCILLARIES COMPONENT PRODUCT SIZE LENGTH/ CODE COLOUR PACK BULK PRODUCT PRICE

DESCRIPTION DESCRIPTION NO. QTY BAG/ GROUP EACHPALLET CODE £

GREY BLACK BROWN WHITE QTY(G) (B) (BR) (W)

Bottle Trap 32mm 38mm Seal WP37 • 10 30 35M 3.4840mm 38mm Seal WP38 • 10 30 35M 4.0032mm 75mm Seal WP45 • 10 30 35M 3.8040mm 75mm Seal WP46 • 10 20 35M 4.44

Bottle Trap 32mm 75mm Seal WPT47 • 10 30 35M 5.27(Adjustable 40mm 75mm Seal WPT48 • 10 20 35M 5.88Telescopic)

Resealing 32mm 75mm Seal WP41 • 10 30 35M 5.19Bottle Trap 40mm 75mm Seal WP42 • 10 20 35M 6.01

Resealing Bottle 32mm 75mm Seal WP41T • 1 30 35M 6.69Trap (Adjustable 40mm 75mm Seal WP42T • 1 20 35M 7.62Telescopic)

Bottle Trap 32mm 75mm Seal Anti-Syphon WP45PV • 1 30 35M 5.6240mm 75mm Seal Anti-Syphon WP46PV • 1 20 35M 6.18

Bottle Trap 32mm 75mm Seal Anti-Syphon WPT47PV • 1 30 35M 7.03(Adjustable 40mm 75mm Seal Anti-Syphon WPT48PV • 1 20 35M 7.62Telescopic)

Chromium Plated 32mm 75mm Seal PBT41CP 1 8 35M 18.14Bottle Trap 38mm 75mm Seal PBT42CP 1 8 35M 25.67(AdjustableTelescopic)

Chromium Plated 32mm 200mm Extension Tube PET11CP 1 8 35M 8.48Extension Tube 38mm 200mm Extension Tube PET12CP 1 8 35M 9.60& Wall FlangeTubular Trap 32mm 38mm Seal WP49 • 1 30 35M 4.00(With Cleaning Eye) 40mm 38mm Seal WP50 • 1 30 35M 4.44

32mm 75mm Seal WP39 • 1 30 35M 4.1540mm 75mm Seal WP40 • 1 30 35M 4.55

Tubular Swivel 32mm 38mm Seal WT50 • 10 30 35M 3.80Trap ‘P’ 40mm 38mm Seal WT51 • 10 30 35M 4.29

32mm 75mm Seal WT52 • 10 30 35M 4.0040mm 75mm Seal WT53 • 10 30 35M 4.44

Tubular Swivel 32mm 75mm Seal WT64 • 10 30 35M 5.67Trap ‘P’ 40mm 75mm Seal WT63 • 10 20 35M 5.88(Adjustable

Telescopic)

Tubular Swivel 40mm 75mm Seal WT66 • 1 30 35M 5.52Trap ‘P’ (WithCleaning Eye)

Tubular Swivel 32mm 75mm Seal Anti-Syphon WT52PV • 1 30 35M 5.74Trap ‘P’ 40mm 75mm Seal Anti-Syphon WT53PV • 1 30 35M 6.18

Silicone Grease 100gm Screw Top Jar SG100 100 89M 9.18Aerosol Lubricant 400ml SG300 12 89M 15.26Cleaning Fluid 250ml Tin CF250 10 89M 7.72Solvent Cement 125ml c/w Brush SC125 20 89M 7.08(BS6209) 250ml c/w Brush SC250 10 89M 10.79

500ml SC500 10 89M 19.55Gap Filling 140gm Tube Clear GFC100 10 89M 9.18Cement


WASTE TRAPS POLYPROPYLENE BS3943

Anti-SyphonShown

1 Eye

2 Eye

Trap with Hose & CP Rose

Anti-Syphon

Trap with Hose & CP Rose

Trap Only

Trap Only

38mm 75mm

Anti-Syphon

Removable Wastefor easy cleaning

Removable Wastefor easy cleaning



Tubular Swivel 32mm 75mm Seal Anti-Syphon WT64PV • 1 30 35M 7.44Trap ‘P’ 40mm 75mm Seal Anti-Syphon WT63PV • 1 20 35M 7.62(Adjustable

Telescopic)

Running Trap 32mm 38mm Seal RT138 • 1 30 35M 4.9040mm 38mm Seal PRT2S • 1 30 35M 5.6232mm 75mm Seal RT176 • 1 30 35M 5.6240mm 75mm Seal PRT2D • 1 20 35M 5.8832mm 75mm Seal Anti-Syphon RT176PV • 1 30 35M 7.3940mm 75mm Seal Anti-Syphon PRT2DPV • 1 20 35M 7.62

Tubular Swivel 32mm 38mm Seal WT54 • 10 30 35M 4.65Trap ‘S’ 40mm 38mm Seal WT55 • 10 30 35M 4.90

32mm 75mm Seal WT56 • 10 30 35M 4.6540mm 75mm Seal WT57 • 10 20 35M 5.19

Tubular Swivel 32mm Adjustable Telescopic WT75 • 1 30 35M 7.03Trap ‘PQS’ 40mm Adjustable Telescopic WT76 • 1 20 35M 8.0475mm Seal 32mm Adjustable Telescopic Anti-Syphon WT75PV • 1 30 35M 8.77

40mm Adjustable Telescopic Anti-Syphon WT76PV • 10 20 35M 9.78

‘P’ to ‘S’ Trap 32mm Universal Compression SE1 • 10 100 27M 1.61Conversion 40mm Universal Compression SE2 • 10 100 27M 1.75Bends

Straight Through 32mm 32mm x 32mm Outlet 1 Cleaning Eye WST1 • 1 30 35M 6.37Trap (75mm Seal) 32mm 32mm x 32mm Outlet 2 Cleaning Eyes WST2 • 1 30 35M 6.64

32mm 32mm x 40mm Outlet 2 Cleaning Eyes WST3 • 1 20 35M 7.03

Bath Trap 32mm With Cleaning Eye WT60 • 10 30 35M 3.48(20mm Seal) 40mm With Cleaning Eye WT58 • 10 30 35M 3.53

Bath Trap c/w 40mm 20mm Seal WT73 • 1 10 35M 9.07OverflowHose & CP

Low Level Bath 40mm Trap only with Access to Overflow WT67 • 10 30 35M 4.90Trap 38mm Seal 40mm Trap c/w Overflow Hose & CP Rose WT69 • 1 10 35M 10.33

40mm Anti-Syphon Trap c/w Access WT67PV • 1 30 35M 6.69to Overflow only

40mm Anti-Syphon Trap c/w Overflow WT69PV • 1 10 35M 12.13Hose & CP Rose

Low Level Bath 40mm Trap only with Access to Overflow WT68 • 10 20 35M 5.88Trap 75mm Seal 40mm Trap c/w Overflow Hose & CP Rose WT71 • 1 10 35M 11.32

40mm Anti-Syphon Trap only with WT68PV • 1 20 35M 7.62Access to Overflow

40mm Anti-Syphon Trap c/w Overflow WT71PV • 1 10 35M 13.11Hose & CP Rose

Bath/Shower 40mm 90° for use with 40mm Running Traps RT90 • 1 10 35M 1.90Trap Swivel Bend

Shower Trap 40mm Plastic PST1 • 10 30 37M 8.5619mm Seal 40mm Chrome Plated PST3 • 10 30 37M 10.57(70mm Grid)

Shower Trap 40mm Plastic with 45° adjustable waste bend PST2 • 10 30 37M 10.2150mm Seal 40mm Chrome Plated with 45° adjustable PST4 • 10 30 37M 12.29(70mm Grid) waste bend


WASTE TRAPS POLYPROPYLENE BS3943



One and a Half 40mm Single Hose Connection WSK1 • 1 5 35M 10.35Undersink Kit 40mm Double Hose Connection WSK1A • 1 5 35M 11.16

Two Bowl 40mm Single Hose Connection WSK2 • 1 5 35M 12.45Undersink Kit

Three Bowl 40mm Single Hose Connection WSK3 • 1 5 35M 14.15Undersink Kit

One Bowl 40mm Double Hose Connection WSSK1 • 1 5 35M 10.91Undersink Kit

Two Bowl 40mm Double Hose Connection WSSK2 • 1 5 35M 18.91Undersink Kit

Three Bowl 40mm Double Hose Connection WSSK3 • 1 5 35M 22.07Undersink Kit

Space Saver 40mm Must be Supported at 150mm Centres WSSB1 • 10 35M 5.80Bend

Appliance Trap 40mm Swivel ‘P’ with Double Adjustable Inlet PPT4200 • 1 10 35M 9.71


WASTE TRAPS POLYPROPYLENE

CONDENSATE DRAINAGE TRAPS POLYPROPYLENE

Unequal Ends

WSTCD

Equal Ends

BS3943





Condensate 110mm For 21.5 to 32mm Wastepipe WSA1 • 1 5 35M 17.63DischargeSoakaway Unit

Condensate 21.5mm 21.5mm Waste Saddle fits 40mm WWS1 • 1 1 35M 6.93Waste Saddle & 32mm pipe

Condensate 21.5mm Check Valve, Compression WCV1 • 1 100 35M 9.35Check Valve & Solvent Weld Connection

Condensate 21.5mm Strap Boss for Discharge to Soil Stack WCDS • 1 20 35M 8.64Strap BossCondensate 21.5mm Tundish Bowl, use where a visible air OA31 • 1 1 29M 4.02Tundish Bowl gap is specified Condensate 21.5mm 21.5mm x 40mm Swept Tee, alternative to WTCD • 1 30 35M 5.32Universal Swept waste saddle if pipes can be cut Tee & moved axiallyCondensate 21.5mm 21.5mm x 21.5mm Condensate Straight WSTCD • 1 30 35M 6.37Straight Through Through TrapTrap 32mm 32mm x 21.5mm Flexible Condensate WSTCD2 • 1 1 35M 6.37

Straight Through Trap

Condensate 40mm 40 x 75mm Seal Condensate Sink Trap PWMCD • 1 1 35M 9.66Sink Trap (21.5 Side Inlet Connection)

Condensate Trap 40mm PV222 • 1 1 91M 7.21

Solvent Cement Solvent Cement Comes with Brush 125ml SC125 20 89M 7.08

Washing 40mm With 0.6m Upstand Pipe & 2 Clips WT59 • 10 10 35M 7.39MachineTrap 75mm Seal

Washing 40mm PWM2 • 10 20 35M 7.62MachineHalf 75mm SealWith AdaptorWashing 40mm Anti-Syphon With 0.6m Upstand WT59PV • 1 10 35M 9.15Machine Pipe & 2 ClipsTrap 75mm Seal

Washing 40mm Anti-Syphon PWM2PV • 1 20 35M 9.42Machine Half Trap 75mm Seal With AdaptorWashing 40mm WT61 • 10 50 35M 3.07MachineTrap AdaptorHose Pipe 40mm WT62 • 10 100 35M 1.17Connector (1” BSPThreaded Nut)

Hose Pipe 40mm WT72 • 10 100 35M 1.78Connector(40mm Spigot)

Waste to Trap 40mm Equal 32 to 32mm WTC1 • 10 100 35M 1.24Connector 40mm Equal 40 to 40mm WTC4 • 10 100 35M 1.24(Compression x BSP 40mm Unequal 32 to 40mm WTC2 • 10 100 35M 1.24Male Iron Tail) 40mm Unequal 40 to 32mm WTC3 • 10 100 35M 1.24

40mm 1¼” x 1¼” Trap Adaptor WTC5 • 10 100 35M 1.17


21.5MM PUSHFIT OVERFLOW SYSTEM POLYPROPYLENE

Do not solvent weld

21.5MM SOLVENT WELD OVERFLOW SYSTEM PVC - ABS

Do not solvent weld





Overflow Pipe 3m NS43 • • 10 10 32E 2.10

Pipe Clip Polypropylene VS53 • 10 100 33M 0.30

Straight NS44 • 10 500 33M 0.92ConnectorKnuckle Bend NS45 • 10 500 33M 0.8890°45° Bend NS55 • 10 500 33M 0.96

90° Tee NS46 • • 10 500 33M 0.92

Straight Adaptor NS47 • 10 250 33M 0.92

Bent Adaptor NS48 • 10 250 33M 0.92

Straight Tank VP49 • 10 250 31M 0.89Connector

Bent Tank VP50 • 10 250 31M 0.93Connector

Reducer from 32mm Reduces to 21.5mm - Plastic EN1455-1 S415 • 1 10 33M 0.93Waste 40mm Reduces to 21.5mm - Plastic EN1455-1 S416 • 1 10 33M 0.93Tank Connector & To connect to 23mm pipe with VS60 • 10 500 33M 0.95Waste Reducer S416, S415, VP50 & VP49Adaptor

Overflow Pipe 3m VP43 • 10 10 30E 2.15

Pipe Clip VP53 • 10 50 31M 0.30

Straight VP44 • 10 500 31M 0.93ConnectorKnuckle Bend VP45 • 10 500 31M 0.8990º45º Bend VP55 • 10 500 31M 0.93

90º Tee VP46 • 10 500 31M 0.93

Straight Adaptor VP47 • 10 250 31M 0.94

Bent Adaptor VP48 • 10 250 31M 0.94

Straight Tank VP49 • 10 250 31M 0.89Connector

Bent Tank VP50 • 10 250 31M 0.93Connector

Reverso Tank VP51 • 10 250 31M 0.93Connector

Reducer from 32mm Reduces to 21.5mm - Rubber EN1451-1 WP73 • 10 500 31M 0.89Waste 40mm Reduces to 21.5mm - Rubber EN1451-1 WP74 • 10 500 31M 0.89


OVERFLOW ANCILLARIES POLYPROPYLENE

112 & 150MM HALF ROUND RAINWATER SYSTEM PVCuFor 150mm use 110mm soil pipe and fittings. Outlets accept plain ended or socketed pipe

RR125 RR131

Tundish System - Internal Side Overflow (Use with Solvent Overflow) Bye Law for cold water storage cisterns. Polypropylene. (Do not Solvent Weld Polypropylene.)

Made to orderin 14 Days

BS4576

Top





Half Round 112mm 2m RR100 • • • • 5 90 40E 8.93Gutter 112mm 4m RR101 • • • • 5 90 40E 15.24

150mm 2m RL600 • • • 1 5 40E 23.54150mm 4m RL601 • • • 1 5/90 40E 40.70

Union Bracket 112mm Screw to Fascia RR102 • • • • 10 50 41M 2.55150mm Screw to Fascia RL602 • • • 1 10 41M 6.98

90º Angle 112mm RR103 • • • • 10 20 41M 4.87150mm RL603 • • • 1 10 41M 17.57

135º Angle 112mm RR104 • • • • 5 20 41M 6.25

Fabricated Angle 112mm Fix Fascia Brackets adjacent to both ends RR192 • • • • 41M 38.02150mm (Exact angle to be stated) RL694 • • • 41M 38.02

Running Outlet 112mm to 68mm Round Downpipe RR105 • • • • 10 10 41M 4.03150mm to 110mm Soil Pipe RL605 • • • 1 10 41M 13.40

Short Stop 112mm to 68mm Round Downpipe RR106 • • • • 1 10 41M 5.03End Outlet External Stop 112mm For use if gutter length is less than 300mm RR107 • • • • 10 50 41M 2.16End 150mm For use if gutter length is less than 300mm RL607 • • • 1 10 41M 5.94Internal Stop 112mm RR108 • • • • 10 100 41M 1.52End 150mm RL608 • • • 1 10 41M 2.44Fascia Bracket 112mm Also fix close to both ends of Angles RR109 • • • • 50 100 41M 1.33

150mm Fix with 1 screw RL609 • • • 10 50 41M 3.99Spacer Plate 112mm Adds 15mm for long tile overhang RR39 • • • • 10 100 41M 0.34

Galvanised Metal 112mm Top Rafter RR110 1 50 41M 4.18Bracket 150mm Top Rafter RL610 1 50 41M 5.32

112mm Side Rafter RR112 1 50 41M 4.18150mm Side Rafter RL612 1 50 41M 5.32112mm Rise and Fall RR111 1 50 41M 6.33150mm Rise and Fall RL611 1 50 41M 7.60

Spike only for galvanised rise and fall bracket RR113 1 50 41M 2.07Round 68mm 2.5m RR121 • • • • 5 90 40E 10.28Downpipe 68mm 4m RR123 • • • • 5 90 40E 15.42

68mm 5.5m RR124 • • • • 5 90 40E 21.28Pipe Connectors 68mm Standard RR125 • • • • 10 50 41M 2.22

68mm CI/AC RR131 • • • • 10 50 41M 5.03

PVC Tundish OA31 • 1 1 29M 4.02Bowl

Tee for Flush 35mm OA30 • 1 1 29M 3.51Pipe 32mm OA34 • 1 1 29M 3.51

Overflow Pipe One end swaged OA35 • 1 1 29M 1.75600mm TUNPAC 1 Complete Kit Low Level Side Overflow OF80 • 1 10 29M 14.34TUNPAC 2 Complete Kit High Level Side Overflow OF81 • 1 10 29M 14.34TUNPAC 3 Complete Kit Close Couple Side Overflow OF82 • 1 10 29M 17.68TUNPAC 4 Complete Side Entry Concealed Cistern OF83 • 1 10 29M 20.81

Byelaw 30 Kit ¾” DIP Tube Bend (PP) BYE30 • 1 50 34M 9.28(England/Wales)WRAS listed

Byelaw 60 Kit 1 ½” DIP Tube Bend (PP) BYE60 • 1 20 34M 15.34(Scotland)

WRAS listed


RR152 RR153 RR154

75MM HALF ROUND RAINWATER SYSTEM PVCu

112 & 150MM HALF ROUND RAINWATER SYSTEM PVCuFor 150mm use 110mm soil pipe and fittings. Outlets accept plain ended or socketed pipe


BS4576





Half Round 75mm 2m RM300 • • • 5 5 40E 5.92GutterUnion 75mm Requires Central Fascia Bracket RM302 • • • 10 100 41M 2.23

90º Angle 75mm Fix Fascia Brackets close to both ends RM303 • • • 10 100 41M 4.41

Fabricated Angle 75mm Exact angle to be stated RM391 • • • 41M 38.02

Running Outlet 75mm Screw to Fascia RM305 • • • 10 30 41M 4.41

Stop End Outlet 75mm Screw to Fascia RM306 • • • 10 30 41M 4.08

Stop End 75mm For use if gutter length RM307 • • • 10 100 41M 1.65External is less than 300mmFascia Bracket 75mm Fix close to both ends of angles RM309 • • • 25 500 41M 1.12

Round 50mm 2m RM350 • • • 5 210 40E 7.20Downpipe

Pipe Connector 50mm RM325 • • • 10 100 41M 1.70

Pipe Bracket 50mm RM326 • • • 50 500 41M 0.93

Offset Bend 50mm RM327 • • • 10 100 41M 2.72112 ½º Angle

Shoe 50mm RM328 • • • 10 100 41M 2.28

Pipe Bracket 68mm RR126 • • • • 20 100 41M 1.59Socket Bracket 68mm RR138 • • • • 10 10 41M 1.88

Pipe Clip 68mm Complete Unit RR152 • • • • 10 100 41M 2.2868mm Clip. Nut and Bolt RR153 • • • • 10 100 41M 1.5368mm Backplate RR154 • • • • 10 100 41M 1.06

92 1/2º Offset 68mm RR132 • • • • 10 50 41M 4.42Bend

112 1/2º Offset 68mm RR127 • • • • 10 50 41M 3.12Bend

Joint Cover (for 68mm RR136 • • • • 10 100 41M 0.80cleanline offsets)

Shoe 68mm RR128 • • • • 10 50 41M 3.27110mm RL428 • • • 1 10 41M 14.87

112 1/2º Branch 68mm RR129 • • • • 5 5 41M 9.45

Access Pipe 68mm RR135 • • • • 1 25 41M 14.93

Hopper Head 68mm Standard 204L x 130W x 130H RR130 • • • • 1 10 41M 13.8368mm Medium 280L x 157W x 145H RR140 • • • • 1 10 41M 13.90110mm Large 280L x 157W x 145H RL140 1 10 41M 22.33

Gutter Adaptor 112mm To accept 100mm Gutter (Red) RY445 1 100 41M 0.62SealRunning Outlet To accept 63mm pipe RY163 10 100 41M 1.94Adaptor



OAK PALLET CODE £GREY BLACK BROWN BROWN WHITE QTY(G) (B) (BR) (C) (W)

112 X 65MM SQUARE SECTION RAINWATER SYSTEM PVCu

Top

Side

Rise & Fall

RS225

RS252 RS253 RS154

RS233RS234

Spike


Square Gutter 2m RS200 • • • 5 5 42E 9.454m RS201 • • • 5 90 42E 15.91

Union Bracket Fix to Fascia with 1 screw RS202 • • • 10 50 43M 2.94

Angle 90° Fix Fascia Brackets adjacent to both ends RS203 • • • 10 10 43M 5.18135° Fix Fascia Brackets adjacent to both ends RS204 • • • 5 20 43M 6.45150° Fix Fascia Brackets adjacent to both ends RS215 • • • 1 10 43M 7.10

Fabricated Angle Fix Fascia Brackets adjacent to both ends RS293 • • • 43M 34.54(Exact angle to be stated)

Running Outlet Fix to Fascia with 2 Screws RS205 • • • 10 10 43M 4.33

Short Stop Fix to Fascia with 1 Screw RS206 • • • 1 10 43M 5.41End Outlet

External Stop For use if gutter length is less than 300mm RS207 • • • 10 50 43M 2.23EndInternal Stop RS208 • • • 10 100 43M 1.70End Fascia Bracket Also fix close to both ends of Angle RS209 • • • 20 100 43M 1.41

Galvanised Rafter Top RS210 1 50 43M 4.56Gutter Support Rafter Side RS212 1 50 43M 5.02Brackets Rise and Fall RS211 1 50 43M 6.90

Spike only for galvanised rise and fall bracket RR113 1 50 41M 2.07

Pipe Adaptor Square to Round RS231 • 10 50 43M 3.90

Square 2.5m RS221 • • • • 5 90 42E 11.28Downpipe 4.0m RS223 • • • • 5 90 42E 16.50

5.5m RS224 • • • • 5 90 42E 23.14Connectors Plain RS225 • • • • 10 50 43M 2.67

Offset inc. Bracket RS233 • • • • 5 10 43M 4.29Flush inc. Bracket RS234 • • • • 5 10 43M 4.29

Pipe Bracket RS226 • • • • 20 100 43M 1.59

Flush Pipe RS236 • • • • 10 100 43M 1.71BracketPipe Clips Complete RS252 • • • • 10 100 43M 2.40

Clip, Nut & Bolt RS253 • • • • 10 100 43M 1.52Backplate RR154 • • • • 10 100 43M 1.06

92 1/2º Offset RS232 • • • • 10 50 43M 5.03Bend

112 1/2º Offset RS227 • • • • 10 50 43M 3.35Bend

Adjustable 25 to 67mm RS237 • • • • 5 25 43M 7.35Offset

Shoe RS228 • • • • 10 50 43M 3.90

112 1/2º Branch RS229 • • • • 5 25 43M 10.02

Access Pipe RS235 • • • • 1 5 43M 15.41

Hopper Head Standard 204L x 130W x 130H RR130 • • • • 1 10 41M 13.83Medium 280L x 157W x 145H RR140 • • • • 1 10 41M 13.90


117 X 75MM POLYFLOW DEEP CAPACITY GUTTER PVCu

130 X 70MM OGEE EXTRA CAPACITY GUTTER PVCu

90º 135º

Use with 68mm roundpipe and fittings.

Use with 68mm round or 65mm square pipe and fittings.

Side

Rise & Fall

Top

Side Rise & Fall

Top

Spike

Spike







Polyflow Gutter 3m RD500 • • • • 5 5 44E 16.884m RD501 • • • • 5 90 44E 21.30

Gutter Union Fix Fascia with 1 screw RD502 • • • • 1 30 45M 3.38

Angle 90° Fix Fascia Brackets adjacent to both ends RD503 • • • • 1 10 45M 6.12135° Fix Fascia Brackets adjacent to both ends RD504 • • • • 1 10 45M 7.74

Fabricated Angle Fix Fascia Brackets adjacent to both ends RD595 • • • • 45M 34.26(Exact angle must be stated)

Running Outlet Fix to Fascia with 2 screws RD505 • • • • 1 10 45M 5.41

External Stop For use if gutter length is less than 300mm RD507 • • • • 1 10 45M 2.81End

Internal Stop RD508 • • • • 1 100 45M 1.76End

Fascia Bracket Also fix close to both ends of Angles RD509 • • • • 10 50 45M 1.433 Screw Holes

Galvanised Top Rafter RD510 1 50 45M 4.30Metal Bracket Side Rafter RD512 1 50 45M 4.30

Rise and Fall RD511 1 50 45M 6.78Spike only for galvanised rise and fall bracket RR113 1 50 41M 2.07

Ogee Gutter 2m ROG00 • • • 5 5 46E 12.324m ROG01 • • • 5 105 46E 22.98

Union Bracket Fix to Fascia with 2 screws ROG02 • • • 1 30 47M 3.64

External & EXT 90° Fix to fascia with 2 screws ROG03 • • • 1 10 47M 6.62Internal Angle INT 90° Fix to fascia with 2 screws ROG13 • • • 1 10 47M 6.62

EXT 120° Fix to fascia with 2 screws ROG06 • • • 1 10 47M 8.21INT 120° Fix to fascia with 2 screws ROG16 • • • 1 10 47M 8.21EXT 135° Fix to fascia with 2 screws ROG04 • • • 1 10 47M 7.46INT 135° Fix to fascia with 2 screws ROG14 • • • 1 10 47M 8.21EXT 150° Fix to fascia with 2 screws ROG21 • • • 1 10 47M 8.21

Fabricated Angle Fix to Fascia with 2 screws ROG96 • • • 47M 36.95(Exact angle must be stated)

Running Outlet Fix to Fascia with 2 screws ROG05 • • • 1 10 47M 5.83

External Stop Left Hand ROG07 • • • 1 10 47M 3.18End For use if gutter length is less than 300mm

Right Hand ROG17 • • • 1 10 47M 3.04For use if gutter length is less than 300mm

Internal Stop Left Hand ROG08 • • • 1 10 47M 1.90End Right Hand ROG18 • • • 1 10 47M 1.90Fascia Bracket Fix at max 1.0m centres ROG09 • • • 10 100 47M 1.59

(3 screw holes)Top Hang Fascia Fix at max 1.0m centres ROG25 • • • 1 10 47M 1.67BracketConnector to Left Hand ROG15 • • • 1 10 47M 9.20Cl Ogee Right Hand ROG19 • • • 1 10 47M 9.20

Metal Bracket Top Rafter ROG10 1 50 47M 5.15Side Rafter ROG12 1 50 47M 5.15Rise and Fall ROG11 1 50 47M 6.98



117 X 75MM SOVEREIGN HIGH CAPACITY GUTTER PVCu

Top

Side

Rise & Fall

Use with 65mm squarepipe and fittings.

ELEGANCE - HALF ROUND CAST IRON EFFECT

Spike



Residential Application


OAK PALLET CODE £BLACK BROWN BROWN WHITE QTY(B) (C) (BR) (W)



Sovereign 2m RH700 • • • • 4 4 129E 13.41Gutter 4m RH701 • • • • 4 4 129E 25.01

Union Bracket Fix to Fascia with 1 screw RH702 • • • • 1 10 130M 4.40

90° Angle External RH703 • • • • 1 10 130M 7.48Internal RH713 • • • • 1 10 130M 7.48



Fabricated Angle Fix to Fascia with 2 screws RH797 • • • • 130M 43.41(Exact angle must be stated)

Running Outlet Fix to Fascia with 2 screws RH705 • • • • 1 10 130M 7.08

External Stop Left Hand RH707 • • • • 1 10 130M 3.67End For use if gutter length is less than 300mm

Right Hand RH717 • • • • 1 10 130M 3.67For use if gutter length is less than 300mm

Internal Stop Left Hand RH708 • • • • 1 10 130M 2.50End Right Hand RH718 • • • • 1 10 130M 2.50

Profiled External Left Hand RH721 • • • • 1 10 130M 4.70Stop End For use if gutter length is less than 300mm

Right Hand RH719 • • • • 1 10 130M 4.70For use if gutter length is less than 300mm

Profiled Internal Left Hand RH731 • • • • 1 10 130M 2.80Stop End Right Hand RH729 • • • • 1 10 130M 2.80

Fascia Bracket Fix at max 1.0m centres RH709 • • • • 10 100 130M 1.693 screw holes

Top Hang Fascia Fix at max 1.0m centres RH725 • • • • 10 100 130M 1.77BracketConservatory Fix at max 1.0m centres RH726 • • • • 10 100 130M 1.65Top Hang BracketPipe Adaptor Square to Round RH720 • 1 10 130M 4.42

Metal Bracket Top Rafter RH710 1 50 130M 5.69Side Rafter RH712 1 50 130M 5.16Rise and Fall RH711 1 50 130M 7.88


Gutter Half Round Gutter 2m CIRG2 • 1 6 MT217 13.60Half Round Gutter 4m CIRG4 • 1 6 MT217 28.30

Union Screw to Fascia CIRU1 • 1 10 MT218 7.30BracketAngle 90° 90º Angle CIRA1 • 1 10 MT218 10.45

Angle 135º CIRA2 • 1 10 MT218 10.45

Fabricated Exact angle to be stated CIRSPECIAL • 1 MT218 44.56Angle

Running CIRO1 • 1 10 MT218 9.40Outlet

Stop End CIRO2 • 1 10 MT218 9.40Outlet

NEW


Stop End Return For use if gutter length is less than 300mm CIRE1 • 1 10 MT218 4.15(External)

Stop End CIRE2 • 1 10 MT218 4.15Return(Internal)

Facia Bracket Also fix close to both ends of Angles CIRFB1 • 1 25 MT218 1.79

Downpipe 2.5m CIRP25 • 1 6 MT217 31.344m CIRP4 • 1 6 MT217 50.355.5m CIRP55 • 1 6 MT217 69.25

Pipe Socket CIRS1 • 1 10 MT218 7.30

Pipe Clip CIRC1 • 1 50 MT218 4.15

Lugged Bracket CIRL1 • 1 10 MT218 4.15

Bend 90º CIRB1 • 1 10 MT218 10.45

Offset Bend CIRB2 • 1 10 MT218 10.45112º

Shoe CIRB3 • 1 10 MT218 7.30

Branch 112º CIRY1 • 1 10 MT218 23.05

Decorative CIRH1 • 1 1 MT218 29.35Hopper

Rainsava UK Model fits 68, 63mm round RSR350 • 1 1 41M 26.02(Rainwater and 65mm squareDiverter) Euro Model 80 to 82.5mm Round RSR825 • 1 1 41M 28.64

Galvanised Top Rafter Arm (9” Metal Spar) RBT1 1 50 41M 4.02Rafter Arm Side Rafter Arm (9” Metal Spar) RBS2 1 50 41M 4.02Galvanised SM46 1 50 11M 2.03Drive-in SpikeDownpipe PA20 100 41M 20.76SpacerGalvanised RR155 • • • • 10 100 41M 2.15Extended Back PlatePlastic to Metal Half Round to Half Round RR116 • • • • 1 10 41M 4.29Gutter Adaptors Half Round to Ogee Left Hand RR117 • • • • 1 10 41M 4.66

Half Round to Ogee Right Hand RR118 • • • • 1 10 41M 4.66Square to Half Round RS216 • • • • 1 10 43M 3.90

Square to Ogee Left Hand RS217 • • • • 1 10 43M 4.66Square to Ogee Right Hand RS218 • • • • 1 50 43M 4.66

UNIVERSAL RAINWATER FITTINGS AND ADAPTORS BS4576Rainsava



ELEGANCE - HALF ROUND CAST IRON EFFECT Residential Application




BELOW GROUND PRODUCTS

Below Ground ProductsPolypipe’s Below Ground proposition is not confined purely to drainage products.As well as a significant range of traditional underground drainage pipe, fittings and chambers, we canalso provide structured wall sewer systems and a newly added comprehensive offering of Civils products.

Also in the portfolio are sustainable drainage products such as Rainwater Harvesting and modular water

storage cells, not to mention our renowned range of MDPE pipe, geothermal pipe and Polyfast

polyethylene fittings, plus our Polyguard barrier pipe which guards against the ingress of

contaminants to drinking water on Brownfield sites.

BENEFITS OF POLYGUARD:

• All the benefits of a plastic pipe system; high corrosion resistance,lightweight and flexible, coupled with a protective impenetrable aluminium barrier

• Increased on site resistance to damage and theft from a robustproduct with no scrap value

• Available in 25mm, 32mm and 63mm sizes

• A wide product range of brassware tees, elbows, standardand transition couplings and 50m pipe coils

• Approved under regulation 31 of theWater Supply (Water Quality) Regulations 2000

BENEFITS OF POLYSOAK:

• Pre-constructed soakaway unit suitable for drainingroof areas of up to 25m2

• More efficient than traditional granular fill soakaways

• Lightweight, quick and easy to install

• Ideal for shallow excavation

• Reduces preparation, removal, backfilland installation times

• BBA approved

• 95% void ratio ensuring maximum water storage capability

For more information on Polysoak or Polyguard please visit www.polypipe.comor contact your local Polypipe representative

COMPONENT PRODUCT SIZE LENGTH/ CODE PACK BULK BAG/ PRODUCT PRICEDESCRIPTION DESCRIPTION NO. QTY PALLET GROUP EACH

QTY CODE £


Plain Ended 3in/82mm 3m UG330 1 104 50E 24.93Pipe 3in/82mm 6m UG360 1 104 50E 49.75

4in/110mm 3m UG430 1 57 50E 20.884in/110mm 6m UG460 1 57 50E 41.626in/160mm 3m UG630 1 46 50E 48.796in/160mm 6m UG660 1 46 50E 93.10

Single Socket 4in/110mm 3m UG432 1 57 50E 26.87Pipe 4in/110mm 6m UG462 1 57 50E 46.36

6in/160mm 3m UG632 1 46 50E 59.006in/160mm 6m UG662 1 46 50E 107.71

Plain Ended 4in/110mm 6m UG465 1 57 50E 62.84Perforated Pipe 6in/160mm 6m UG665 1 46 50E 118.43

Single Socket 4in/110mm 6m UG469 1 57 50E 67.29Perforated Pipe 6in/160mm 6m UG669 1 46 50E 132.50

Manhole 6in/160mm 600mm (Sand Coated one end) UGR699 1 46 50E 9.61Connector

Temporary 4in/110mm For Site protection of Plain End Pipe PC04 10 100 51M 1.75Pipe CapSingle Socket 3in/82mm Requires Solvent Welding USH33 1 20 51M 6.10

4in/110mm Requires Solvent Welding USH43 1 10 51M 6.686in/160mm Requires Solvent Welding USH643 1 20 51M 14.41

Double Socket 3in/82mm Remove Centre Stop for use as Slip Coupling UG301 1 20 51M 6.434in/110mm Remove Centre Stop for use as Slip Coupling UG401 1 10 51M 6.486in/160mm Remove Centre Stop for use as Slip Coupling UG601 1 10 51M 13.37

Polypropylene 4in/110mm Do Not Solvent Weld UG402 1 50 51M 5.05Double Socket 6in/160mm Do Not Solvent Weld UG602 1 10 51M 10.63Single Socket 3in/82mm 87½° UG312 1 10 51M 11.21Bend 4in/110mm 87½° UG412 1 10 51M 10.89

6in/160mm 87½° UG612 1 5 51M 35.993in/82mm 45° UG304 1 20 51M 11.214in/110mm 45° UG404 1 10 51M 10.896in/160mm 45° UG604 1 10 51M 35.994in/110mm 30° UG468 1 10 51M 10.426in/160mm 30° UG668 1 10 51M 35.444in/110mm 15° UG410 1 10 51M 10.426in/160mm 15° UG610 1 10 51M 35.444in/110mm 11¼° UG408 1 10 51M 10.91

Double Socket 4in/110mm 87½° (Long Radius) UG411 1 10 51M 12.66Bend 6in/160mm 87½° (Long Radius) UG611 1 5 51M 42.04

4in/110mm 45° UG403 1 10 51M 12.666in/160mm 45° UG603 1 10 51M 42.044in/110mm 30° UG467 1 10 51M 12.046in/160mm 30° UG667 1 10 51M 41.544in/110mm 15° UG409 1 10 51M 12.526in/160mm 15° UG609 1 10 51M 41.544in/110mm 11¼° UG407 1 10 51M 13.10

87½° Rest Bend 4in/110mm Double Socket (for foot of Soil Stack) UG483 1 10 51M 16.50(Long Radius)

0-30° Adjustable 4in/110mm PP Do Not Solvent Weld UG494 1 10 51M 14.73Double Socket BendLong Radius Bend 4in/110mm 87½° Plain Ended UG471 1 7 51M 36.89

6in/160mm 87½° Plain Ended UG671 1 51M 66.724in/110mm 45° Plain Ended UG472 1 10 51M 32.456in/160mm 45° Plain Ended UG672 1 10 51M 49.014in/110mm 22½° Plain Ended UG473 1 51M 27.964in/110mm 11¼° Plain Ended UG474 1 51M 27.25

Equal Junctions 3in/82mm 87½° Double Socket UG324 1 10 51M 19.854in/110mm 87½° Double Socket UG424 1 10 51M 19.356in/160mm 87½° Double Socket UG624 1 5 51M 70.364in/110mm 45° Double Socket UG406 1 10 51M 19.356in/160mm 45° Double Socket UG606 1 5 51M 70.364in/110mm 87½° Triple Socket UG423 1 10 51M 22.176in/160mm 87½° Triple Socket UG623 1 5 51M 73.824in/110mm 45° Triple Socket UG405 1 10 51M 22.176in/160mm 45° Triple Socket UG605 1 5 51M 73.8245°

87½°

UNDERGROUND DRAIN PVCu TERRACOTTA BROWN UNLESS OTHERWISE STATED BS4660:2000& EN1401-1


QTY CODE £


Unequal 6in/160mm 87½° Double Socket (160 x 160 x 110mm) UG644 1 5 51M 55.38Junctions 6in/160mm 45° Double Socket (160 x 160 x 110mm) UG636 1 5 55.38

6in/160mm 87½° Triple Socket (160 x 160 x 110mm) UG643 1 5 51M 60.886in/160mm 45° Triple Socket (160 x 160 x 110mm) UG635 1 5 51M 60.88

Level Invert 4in/110mm Reduces to 82mm Socket/Spigot UG421 1 20 51M 11.12Reducer 6in/160mm Reduces to 110mm Socket/Spigot UG621 1 10 51M 22.23Plain Socket Plug 3in/82mm Also for site protection of socket UG320 1 51M 6.35

4in/110mm Also for site protection of socket UG420 1 10/50 51M 6.626in/160mm Also for site protection of socket UG620 1 10 51M 13.44

Bottle Gully 4in/110mm Plain (Roddable) inc. round PP grid (Black) UG425 1 5 51M 36.20

Back Inlet 4in/110mm Roddable inc. round PP grid (Black) UG427 1 5 51M 38.15Bottle Gully (Open 110mm rear inlet)

Bottle Gully 4in/110mm Round Aluminium Grid UG442 1 50 51M 9.28Ancillaries 4in/110mm Spare PP Round Grid UG426 1 100 51M 3.48

4in/110mm Sealed Access Cover (Aluminium) UG433 1 10 51M 34.134in/110mm Blanking Plug with 50mm Boss Shoulder UG427S 1 25 51M 8.19

for waste connection4in/110mm Back Entry Bend UG480 1 10 51M 9.794in/110mm Raising Piece marked for cutting 225mm UG427R 1 10 51M 8.68

to required height max4in/110mm Square Top surround - Black PP (not for UG433) UG418 1 20 51M 6.12

Anti-Flood Valve 4in/110mm Spigot/Socket AFV110 1 51M 221.766in/160mm Spigot/Socket AFV160 1 51M 273.28

Lowback 'P' Trap 4in/110mm To convert to 'S' Trap add 87½° Bend UG498 1 10 51M 24.75(Spigot Outlet/ To convert to 'Q' Trap add 45° BendSocket Inlet) Invert depth not to exceed 600mm when used

below HoppersDrop Rod hole is suspended system

Universal Gully 4in/110mm Socket/Spigot 45° UG413 1 10 51M 15.06Trap

Back Inlet 4in/110mm Spigot Outlet inc square PP Grid (Black) UG414B 1 20 51M 14.93Square Hopper use with UG413

Square Hopper 4in/110mm Spigot End (140mm) inc Square PP grid (Black) UG417 1 10 51M 11.474in/110mm Solvent Socket inc. Square PP grid (Black) UG414 1 30 51M 11.12

Raising Piece for 4in/110mm 160mm depth UG470 1 10 51M 6.93Square Hopper

Square Aluminium 4in/110mm 150mm x 150mm UG443 1 50 51M 7.38Grid

Spare Square PP 4in/110mm Also fits UG414B UG415 1 100 51M 3.48Grid (Black) 150mm x 150mm

Rectangle Hopper 4in/110mm 140mm Spigot inc rectangular PP grid (Black) UG428 1 5 51M 14.80275mm x 175mm

Spare Rectangular 4in/110mm UG429 1 51M 3.65PP grid (Black)

414

417

UNDERGROUND DRAIN PVCu TERRACOTTA BROWN UNLESS OTHERWISE STATED

427S 480426

433442

470

Double Triple

BS4660:2000& EN1401-1



QTY CODE £

Polycore Plain 4in/110mm 3m UFC430 1 57 103E 21.25Ended Pipe 4in/110mm 6m UFC460 1 57 103E 40.46

6in/160mm 3m UFC630 1 46 103E 41.196in/160mm 6m UFC660 1 46 103E 82.34

Polycore Single 4in/110mm 3m UFC432 1 57 103E 26.10Socket Pipe 4in/110mm 6m UFC462 1 57 103E 45.05

6in/160mm 3m UFC632 1 46 103E 49.876in/160mm 6m UFC662 1 46 103E 86.94

Couplers 4in/110mm Double Socket Coupler UR401 1 10 59M 4.78(Remove Centre Stop for use as slip coupler)

6in/160mm Double Socket Coupler UG601 1 10 51M 13.37(Remove Centre Stop for use as slip coupler)

Reducer 6in/160mm Reduces to 110mm (Spigot/Socket) UG621 1 10 51M 22.23

87½°Single 4in/110mm Socket/Spigot Short Radius Swept Bend UR412 1 10 59M 9.97Socket Bend 6in/160mm Socket/Spigot Short Radius Swept Bend UR612 1 5 59M 31.88

45° Single 4in/110mm Socket/Spigot UR404 1 10 59M 9.97Socket Bend 6in/160mm Socket/Spigot UR604 1 10 59M 31.8830° Single 4in/110mm Socket/Spigot UR468 1 10 59M 10.07Socket Bend 6in/160mm Socket/Spigot UR668 1 10 59M 31.3515° Single 4in/110mm Socket/Spigot UR410 1 10 59M 10.07Socket Bend 6in/160mm Socket/Spigot UR610 1 10 59M 31.3587½° Double 4in/110mm Socket/Socket Short Radius Swept Bend UR411 1 10 59M 11.55Socket Bend 6in/160mm Socket/Socket Short Radius Swept Bend UR611 1 5 37.21

45° Double 4in/110mm Socket/Socket UR403 1 10 59M 11.55Socket Bend 6in/160mm Socket/Socket UR603 1 10 59M 37.21

30° Double 4in/110mm Socket/Socket UR467 1 10 59M 11.10Socket Bend 6in/160mm Socket/Socket UR667 1 10 59M 36.86

15° Double 4in/110mm Socket/Socket UR409 1 10 59M 11.61Socket Bend 6in/160mm Socket/Socket UR609 1 10 59M 36.86Equal Junctions 4in/110mm 87½° Double Socket/Spigot UR424 1 10 59M 18.64

4in/110mm 45° Double Socket/Spigot UR406 1 10 59M 18.646in/160mm 45° Double Socket/Spigot UR606 1 5 59M 62.264in/110mm 87½° Triple Socket UR423 1 10 59M 20.444in/110mm 45° Triple Socket UR405 1 10 59M 20.446in/160mm 45° Triple Socket UR605 1 5 59M 65.39

Unequal Junction 6in/160mm 45° Double Socket/Spigot (160 x 160 x 110mm) UR636 1 5 59M 49.006in/160mm 45° Triple Socket (160 x 160 x 110mm) UR635 1 5 59M 53.91

45° Rodding 4in/110mm Aluminium Plain Oval Top/Spigot Tail UG422 1 20 51M 39.88(c/w Plate and Screws)

Eye Terminal 4in/110mm Sealed Oval Top/Spigot Tail UG422S 1 20 51M 41.896in/160mm Sealed Oval Top/Socket Tail UG622S 1 8 51M 96.044in/110mm Aluminium Sealed Square Top/Socket Tail UG416S 1 15 51M 45.014in/110mm Black PP Sealed Square Top/Spigot Tail UG522 1 20 51M 32.37

(Do not Solvent Weld)4in/110mm Black PP Sealed Square Top/Socket Tail UG521 1 20 51M 35.99

(Do not Solvent Weld)Access Pipe 4in/110mm Single Socket with 3 Boss Shoulders USA43 1 10 51M 25.58

6in/160mm Single Socket - Plain only USA643 1 10 51M 56.26Screwed Access Plug 4in/110mm Spigot to Socket USA62 1 20 51M 11.61Screwed Access Plug 6in/160mm Spigot to Socket USA662 1 10 51M 26.15Screwed Access Cap 4in/110mm Socket (requires Solvent Welding to pipe) USA63 1 20 51M 12.45Access Bend 4in/110mm 92½° Single Socket USB413 1 10 51M 35.99

Puddle Flange 4in/110mm Ring seal socket/Solvent socket PUD110 1 25 51M 25.21200 x 200mm Grey PVC Flange

6in/160mm Ring seal socket/Solvent socket PUD160 1 10 51M 41.45200 x 200mm Grey PVC Flange

ACCESS FITTINGS & PUDDLE FLANGES PVCu TERRACOTTA BROWN UNLESS OTHERWISE STATED BS4660:2000

POLYCORE AND POLYRIB DRAINAGE PVCu TERRACOTTA BROWN UNLESS OTHERWISE STATED Agreement ApprovedCert. No. 89/2206

Double Socket

Double Socket

Triple Socket

Triple Socket


QTY CODE £


U/RSocket

EN1401Spigot

UG463UG663

UG464UG664

ANTI-SPLASH CONCRETE SURROUNDS SUPPLIED FACTORY BONDED TO PVCu GULLYS AND HOPPERS AS A COMPLETE UNIT READY TO INSTALL ON SITE

UNDERGROUND DRAINAGE ADAPTORS TERRACOTTA BROWN UNLESS OTHERWISE STATED

UG434UG634

UG459UG659

UG486UG696

UG487UG697

EPDM Black


QTY CODE £


QTY CODE £

Clay/Cast 4in/110mm To Spigot UG463 1 10 51M 13.59Iron Adaptors 6in/160mm To Spigot UG663 1 4 51M 29.33

4in/110mm To Socket UG464 1 10 51M 9.416in/160mm To Socket UG664 1 4 51M 21.84

Super Clay 4in/110mm Super Clay Socket to PVC Spigot UG459 1 30 51M 10.86Pipe Adaptors 6in/160mm Super Clay Socket to PVC Spigot UG659 1 20 51M 16.22(Polypropylene) 4in/110mm Super Clay Socket to PVC Socket UG434 1 30 51M 12.63

6in/160mm Super Clay Socket to PVC Socket UG634 1 20 51M 19.01

Thick Clay 4in/110mm Thick Clay Socket to PVC Spigot UG487 1 30 51M 11.61Pipe Adaptors 6in/160mm Thick Clay Socket to PVC Spigot UG697 1 20 51M 17.18(Polypropylene) 4in/110mm Thick Clay Socket to PVC Socket UG486 1 30 51M 13.44

6in/160mm Thick Clay Socket to PVC Socket UG696 1 20 51M 19.95

Ultrarib Adaptor 150mm Ultrarib Socket to EN1401 Spigot UG6106 1 51M 35.69

Universal 4in/110mm Locates on Spigot - Flexible to accept all UG493 1 250 51M 4.67Drain Adaptors Waste and Rainwater pipes inc. Square(Black EPDM) 4in/110mm Locates on Socket - Flexible to accept all UG485 1 250 51M 4.67

Waste and Rainwater pipes inc. Square

Rainwater 4in/110mm 110mm Spigot/Socket to 68mm Round Socket UG254 1 50 51M 4.35(Do not Solvent Weld Polypropylene)

3in/82mm 82mm Spigot/Socket to 68mm Round Socket UG253 1 50 51M 3.81(PP Do not Solvent Weld Polypropylene)

Waste Pipe 4in/110mm Socket to 32mm single UG455 1 25 51M 8.68Adaptors 4in/110mm Socket to 40mm single UG456 1 25 51M 8.68

4in/110mm Socket to 50mm single UG457 1 25 51M 9.874in/110mm 32mm and 40mm double mixed to Socket UG461 1 25 51M 11.424in/110mm 40mm and 40mm double equal to Socket UG492 1 25 51M 11.424in/110mm Single to Pipe or Spigot UG435 1 25 51M 5.76

(Requires Waste Boss Adaptor)

Bottle Gully 4in/110mm Plain (inc. Round Black PP grid) UG425AST 1 50 51M 54.20(with Anti- 4in/110mm Back Inlet (inc. Round Black PP grid) UG427AST 1 50 51M 56.44Splash Top) 4in/110mm Raising piece marked for cutting UG427RAST 1 50 23.74

to required height (max 225mm)

Square Hopper 4in/110mm Solvent/Socket Outlet (inc. Square Black PP grid) UG414AST 1 51M 26.23(with Anti-

Splash Top)

Rectangular Hopper 4in/110mm 140mm Spigot End (inc. Rectangular Black PP grid) UG428AST 1 50 51M 29.81(with Anti-

Splash Top)

Aluminium 4in/110mm Square Flush to top UG454 1 50 51M 14.15Square Top 4in/110mm Heavy Duty Square grid UG543 1 51M 40.17Surround Grids 207mm x 207mm



QTY CODE £

SETTLEMENT FITTINGS

Max. 150mm

movement

300mm

SS700

SS701

390mm

Max. 250mm

movement

210mm

SS702

Solvent SocketSS703

Max. 150mm

movement

SS704

SolventSocket

SS705

SS706 Max. 150mm

movement

SolventSocket

SS707

CHANNEL COMPONENTS PVCu TERRACOTTA BROWN UNLESS OTHERWISE STATED

Left hand

FOR SITUATIONS WHERE DIFFERENTIAL SETTLEMENT MAY BE AN ISSUE. TERRACOTTA BROWNUNLESS OTHERWISE STATED


QTY CODE £

Channel Access 4in/110mm 1.5m Double Spigot UG447 1 51M 38.08Pipe 6in/160mm 1.5m Double Spigot UG647 1 51M 58.73

Manhole 4in/110mm 0.6m Double Spigot UG448 1 51M 22.23Connectors 6in/160mm 0.6m Double Spigot UG648 1 51M 28.76Channel 4in/110mm Socket/Socket UG449 1 51M 5.95Coupling 6in/160mm Socket/Socket UG649 1 51M 10.56Channel Bends 4in/110mm 87½° Single Socket Left Hand UG450L 1 51M 10.14

4in/110mm 87½° Single Socket Right Hand UG450R 1 51M 10.146in/160mm 87½° Single Socket Left Hand UG650L 1 51M 21.526in/160mm 87½° Single Socket Right Hand UG650R 1 51M 21.524in/110mm 45° Single Socket Left Hand UG451L 1 51M 10.144in/110mm 45° Single Socket Right Hand UG451R 1 51M 10.146in/160mm 45° Single Socket Left Hand UG651L 1 51M 21.526in/160mm 45° Single Socket Right Hand UG651R 1 51M 21.524in/110mm 87½° Double Socket UG475 1 51M 11.754in/110mm 45° Double Socket UG476 1 51M 11.75

Three Quarter 4in/110mm 87½° Left Hand UG948L 1 51M 15.75Channel Bends 4in/110mm 87½° Right Hand UG947R 1 51M 15.75(with full 4in/110mm 45° Left Hand UG946L 1 51M 15.75socket inlet) 4in/110mm 45° Right Hand UG945R 1 51M 15.75

Settlement Socket 4in/110mm Allows for up to 150mm movement SS700 1 51M 16.26300mm overall length

Settlement Socket 4in/110mm Allows for up to 250mm movement SS701 1 51M 27.43390mm overalllength

Settlement Branch 4in/110mm 210mm Spigot tail for use with SS704 or 706 SS702 1 51M 26.47Pipe (92½° to Soil)

Solvent Branch 4in/110mm Solvent weld required pipe length into bottom SS703 1 51M 20.59only (92½° to Soil) socket on site

Settlement 92½° 4in/110mm Max 150mm movement - for use SS704 1 51M 37.52Rest Bend at foot of soil stack

Solvent 92½° 4in/110mm Solvent weld SS700, or SS701 on site SS705 1 51M 20.36Rest Bend only

Settlement 92½° 4in/110mm Max 150mm movement - NOT to be used SS706 1 51M 35.99Stub Bend at foot of soil stack

Solvent 92½° Stub 4in/110mm Solvent Weld SS700, or SS701 on site SS707 1 51M 18.97Bend only


QTY CODE £


Triple socket

CHANNEL COMPONENTS PVCu TERRACOTTA BROWN UNLESS OTHERWISE STATED.

Left hand

Left hand

INSPECTION CHAMBERS, COVERS AND FRAMES POLYPROPYLENE BLACK UNLESS OTHERWISE STATED.

Loading Classification for Cover and FramesA = Equivalent to Class A15 load category of BS EN 124: 19994 (Pedestrians & pedal cyclists only)A+ = Tested to withstand 35kN test load (Light vehicular traffic on domestic drives)C = Tested to withstand 10kN test load (non-vehicular traffic only)

Riser Joints:To ensure an adequate seal it is imperative that the gap between the two finson risers is filled excessively with sealant conforming to BS EN ISO 11600 and any excess, following location, should be smothered around the joint.

URP720

UG537

UG437

UG437

UG438

UG439

UG436

UG499

UG502


QTY CODE £

110mm Shallow 320mm Chamber Base with 2 x 45° side branch inlets UG437 1 48 51M 28.74Access Chambers (170mm with 2 blanking plugs)(Depth should not

exceed 600mm)

(Sockets include

captive ring seal

for chamfered 320mm Chamber Base with 4 side branch inlets - UG537 1 54 51M 44.14pipes) 2 x 45° & 2 x 90°

(170mm with 3 blanking plugs)

320mm Side Riser (135mm) UG438 1 81 51M 15.02

320mm Concrete Cover & PP Frame [A] UG439 1 45 51M 41.46

320mm Aluminium Sealed Cover & Frame [C] UG436 1 10 51M 48.59

320mm Square Concrete Cover & PP Frame [A] UG499 1 45 51M 51.60

320mm Round PVC Cover and Frame [C] UG501 1 5 51M 48.59(Complete with seal and fixing screws)

320mm Square PVC Cover and Frame [C] UG502 1 5 51M 49.62(Complete with seal and fixing screws)

320mm Ductile Iron Cover & PP Frame (EN124/Class B125) UDC700 1 113M 47.12

320mm Recessed Pavior Cover (Galvanised Steel to BS729) URP720 1 51M 94.29390 x 390mm

320mm Plastic Frame to Riser Fixing Kit FRK504 1 51M 7.68

Equal Channel 4in/110mm 87½° Double Socket Left Hand UG452L 1 51M 17.65Junctions 4in/110mm 87½° Double Socket Right Hand UG452R 1 51M 17.65

4in/110mm 45° Double Socket Left Hand UG453L 1 51M 17.654in/110mm 45° Double Socket Right Hand UG453R 1 51M 17.654in/110mm 87½° Triple Socket Left Hand UG477L 1 51M 20.514in/110mm 87½° Triple Socket Right Hand UG477R 1 51M 20.514in/110mm 45° Triple Socket Left Hand UG478L 1 51M 20.514in/110mm 45° Triple Socket Right Hand UG478R 1 51M 20.51

Unequal Channel 6in/160mm 45° Double Socket Left Hand UG654L 1 51M 33.21Junctions 6in/160mm 45° Double Socket Right Hand UG654R 1 51M 33.21(160 x 160 x 110mm)

Long Radius 4in/110mm 87½° UG481 1 51M 47.01Channel 6in/160mm 87½° UG681 1 51M 71.53Bends 4in/110mm 45° UG482 1 51M 40.26(Plain Ended) 6in/160mm 45° UG682 1 51M 61.50

COMPONENT PRODUCT SIZE LENGTH/ CODE PACK BULK BAG/DISCOUNT PRICE

DESCRIPTION DESCRIPTION NO. QTY PALLET CODE EACH



QTY CODE £

INSPECTION CHAMBERS, COVERS AND FRAMES POLYPROPYLENE BLACK UNLESS OTHERWISE STATED.

Loading Classification for Cover and FramesA = Equivalent to Class A15 load category of BS EN 124: 19994 (Pedestrians & pedal cyclists only)A+ = Tested to withstand 35kN test load (Light vehicular traffic on domestic drives)C = Tested to withstand 10kN test load (non-vehicular traffic only)

UG440

UG431

UG419

UG497

UG670

UG512

UG513

UG495

UG491

UG511

UG496

UG490

* Riser Joints: To ensure an adequate seal it is imperative that the gap between the twofins on risers is filled excessively with sealant conforming to BS EN ISO 11600 and anyexcess, following location, should be smothered around the joint.=A rubber sealing ring (UG488) must be used on all riser and chamber base joints

110 & 160mm 460mm 110mm Chamber Base with 4 side branch inlets - UG440= 1 28 51M 68.06Inspection 2 x 45° & 2 x 90° (220mm with 3 blanking plugs)Chambers(Depth Should

not exceed 460mm 160mm Chamber Base with 4 side branch inlets - UG670= 1 24 51M 87.571200mm) 2 x 110mm x 45° & 2 x 160mm x 90° (Sockets include (258mm with 4 blanking plugs)captive ring seal

for chamfered

pipes) 460mm Side Riser (215mm) UG431= 1 24/40 51M 33.56

460mm Riser Sealing Ring (For Dry Fix to UG431) UG488 1 100 51M 3.65

460mm Cast Iron Cover & Frame [A] UG419 1 51M 79.45

460mm Cast Iron Cover & Polypropylene Frame [A] UG444 1 51M 75.61

460mm Concrete Cover & Polypropylene Frame [A] UG497 1 20 51M 59.56

460mm Square Polypropylene Cover and Frame [A+] UG512 1 51M 87.72(complete with seals and fixing screws)

460mm Round Polypropylene Screw down cover & UG511 1 51M 64.34frame BS7158 [A+]Key Lifting and Handle CLH500 1 51M 4.78

460mm Ductile Iron Cover & Polypropylene Frame UDC750 1 113M 79.30(EN124/Class B125)

460mm Recessed Pavior Cover URP760 1 51M 105.59(Galvanised Steel to BS729) 540 x 540mm

460mm Plastic Frame to Riser Fixing Kit FRK500 1 51M 7.97(for use with UG511)

460mm Plastic Frame to Riser Fixing Kit FRK502 1 51M 10.63(for use with UG512)

460mm Spare Black Ties (30) (for FRK 500) - FRK501 1 51M 2.67Not suitable for Cast Iron Frames

460mm Square Cast Iron Cover and Frame UG513 1 51M 177.05(B125)

110mm Rectangular 610 x 460mm Chamber Base with 4 side branch inlets - UG490* 1 51M 80.21Inspection Chamber 2 x LH & 2 x RH x 90° (Depth should (330mm with 3 blanking plugs)not exceed 1200mm)

(Sockets include

seal for

chamfered pipes)

(Main channel inlet

& outlet are plain

end and require

couplers or

socketed pipes)

610 x 460mm Side Riser (180mm) UG491* 1 40 51M 51.30

610 x 460mm Steel Cover & PP Frame [A] UG496 1 51M 86.78

610 x 460mm Concrete Cover & PP Frame [A] UG495 1 10 51M 76.53


COMPONENT PRODUCT SIZE LENGTH/ CODE PACK BULK BAG/ PRODUCT PRICEDESCRIPTION DESCRIPTION NO. QTY PALLET QTY GROUP CODE EACH £



INSPECTION CHAMBERS, COVERS AND FRAMES POLYPROPYLENE - BLACK UNLESS OTHERWISE STATED

UNDERGROUND ANCILLARIES

BS7158

ICDR1

ICDC1

POLYSEWER GRAVITY SEWER SYSTEM PVCu TERRACOTTA BROWN UNLESS OTHERWISE STATEDWIS 4-35-01 (Pipes and Couplers)

UG616

ICDR2

Joint Lubricant 500ml bottle SG500 1 12 89M 13.821kg Tub LUBX1 1 89M 12.752.5kg Tub LUBX2.5 1 89M 31.79

Silicone Grease 100g Screw top jar SG100 1 100 89M 9.18Aerosol Lubricant 400ml SG300 12 89M 15.26Cleaning Fluid 250ml tin CF250 10 89M 7.72Solvent Cement 125ml tin c/w Brush (BS6209) SC125 20 89M 7.08

250ml tin c/w Brush (BS6209) SC250 10 89M 10.79Clear Solvent 140g Tube GFC100 10 89M 9.18Cement FillerSolvent Cement 500ml tin (BS6209) SC500 10 89M 19.55

110mm, 150mm 460mm 110mm Chamber Base with 5 inlets ICDB3 1 51M 319.28and 160mm Non (inc. 3 blanking plugs, base & 4 risers -1060mm high) Man Entry Deep Suitable for Single Wall PipesInspection 460mm 150mm Chamber Base with 2 x 110mm ICDB1 1 4 51M 319.28Chambers 45° inlets & 2 x 150mm 90° open inlets (For use at depths (inc. 2 blanking plugs, base & 4 risers -1060mm high) exceeding 1200mm Suitable for Polysewer Structured Wall Pipesbut less than 460mm 160mm Chamber Base with 2 x 110mm ICDB2 1 4 51M 319.284000mm) 45° inlets & 2 x 160mm 90° inlets

(inc. 4 blanking plugs, base & 4 risers - 1060mm high) Suitable for Single Wall Pipes

460mm Single Riser - 215mm effective height ICDR1 1 40 51M 40.19

460mm Two Riser - 430mm effective height ICDR2 1 16 51M 84.39

460mm Four Riser - 860mm effective height ICDR4 1 8 51M 172.79

460mm Eight Riser - 1720mm effective height ICDR8 1 4 51M 349.56

460mm Riser Sealing Ring UG488 1 10 51M 3.65

460mm Square Cover and Frame - complete with seals and ICDC1 1 51M 91.82fixing screws (350mm opening) [A+]

460mm Plastic Frame to Riser Fixing Kit - use 1 kit per cover FRK502 1 51M 10.63(for use with UG512 and ICDC1)

460mm Riser to Riser Fixing Kit - use 1 kit per riser FRK503 1 51M 15.95

750mm Circular Manhole Base 2 x 45° & 2 x 90° (MDPE) UG616 1 51M 214.63Closed Branch Inlets (Depth not to exceed 10m)

Spare Blanking 110mm Polypropylene for 110mm fits UG445 1 51M 4.03Plugs UG437,440, 490 & 670 Bases

160mm Polypropylene for 160mm UG645 1 51M 4.30Chamber Bases, Pipes and Fittings

Pipe - Higher 150mm 6m Plain Ended PS660 1 46 160E 48.41Stiffness Class 8 150mm 6m Integral Socket PS662 1 46 160E 55.55

150mm 3m Plain Ended PS630 1 46 160E 24.19150mm 3m Integral Socket PS632 1 46 160E 26.55225mm 6m Plain Ended PS1060 1 23 160E 120.86225mm 6m Integral Socket PS1062 1 23 160E 128.51

225mm 3m Plain Ended PS1030 1 23 160E 60.40225mm 3m Integral Socket PS1032 1 23 160E 62.43300mm 6m Plain Ended PS1260 1 9 160E 182.04300mm 6m Integral Socket PS1262 1 9 160E 197.65300mm 3m Plain Ended PS1230 1 9 160E 87.62300mm 3m Integral Socket PS1232 1 9 160E 95.45



110/160mmto EN1401-1,150mm toPolysewer

PS10102

PS1089

PS634

POLYSEWER GRAVITY SEWER SYSTEM PVCu TERRACOTTA BROWN UNLESS OTHERWISE STATEDWIS 4-35-01 (Pipes and Couplers)

Couplers 150mm Pipe Coupler PS601 1 10 161M 10.52150mm Slip Coupler PS600 1 10 161M 10.52225mm Pipe Coupler PS1001 1 161M 25.67225mm Slip Coupler PS1000 1 161M 25.67300mm Pipe Coupler PS1201 1 161M 52.20300mm Slip Coupler PS1200 1 161M 52.20

Reducers 225mm 225mm x 150mm Level Invert PS1021 1 161M 63.09300mm 300mm x 225mm Level Invert PS1221 1 161M 115.18

Triple Socket 150mm 45° Equal Junction PS605 1 5 161M 36.77Equal Junctions 150mm 90° Equal Junction PS623 1 5 161M 36.77

225mm 45° Equal Junction PS1005 1 161M 140.01300mm 45° Equal Junction PS1205 1 161M 299.59

Triple Socket 150mm 150mm x 110mm EN1401-1 PS635RS 1 5 161M 33.81Unequal Junctions 150mm 150mm x 110mm EN1401-1 (92½°) PS643RS 1 5 161M 33.81(45° unless stated) 225mm 225mm x 110mm EN1401-1 PS1035RS 1 161M 104.13

225mm 225mm x 150mm PS1031 1 161M 87.08225mm 225mm x 160mm EN1401-1 PS1031RS 1 161M 94.16300mm 300mm x 110mm EN1401-1 PS1235RS 1 161M 172.98300mm 300mm x 150mm PS1231 1 161M 141.64300mm 300mm x 160mm EN1401-1 PS1231RS 1 161M 155.67300mm 300mm x 225mm PS12100 1 161M 285.17

Double Socket 150mm 90° Bend PS611 1 5 161M 21.13Short Radiused 150mm 45° Bend PS603 1 10 161M 18.06Bends 150mm 30° Bend PS667 1 10 161M 18.06

150mm 15° Bend PS609 1 10 161M 18.06225mm 90° Bend PS1011 1 161M 94.15225mm 45° Bend PS1003 1 161M 72.95225mm 30° Bend PS1067 1 161M 74.47225mm 15° Bend PS1009 1 161M 72.32300mm 90° Bend PS1211 1 161M 149.06300mm 45° Bend PS1203 1 161M 127.86300mm 30° Bend PS1267 1 161M 124.13300mm 15° Bend PS1209 1 161M 117.98

Rodding Eye 150mm Sealed oval top (Aluminium) 45° PS622S 8 161M 85.96

150mm Chamber 150mm 150mm Main Channel PS670 8 161M 91.66Base 2 x 110mm inlets 45°

2 x 150mm inlets 90°

Adaptors 150mm Double Socket to Super Clayware Pipe PS634 1 20 161M 30.69150mm Double Socket to Thick Clayware Pipe PS696 1 20 161M 70.20

For connections to 225mm & 300mm clay pipes 161Muse flexible connector to WIS 4-41-01

150mm Double Socket to EN1401-1 Pipe (160mm) PS689 1 10 161M 32.67225mm Double Socket to EN1401-1 Pipe (250mm) PS1089 1 161M 94.11300mm Double Socket to EN1401-1 Pipe (315mm) PS1289 1 161M 116.61225mm Single Socket to EN1401-1 Socket (250mm) PS10102 1 161M 77.49300mm Single Socket to EN1401-1 Socket (315mm) PS12102 1 161M 89.69

Ultrarib Adaptor 150mm Double Socket PS6105 1 161M 32.01225mm Double Socket PS10105 1 161M 77.49300mm Double Socket PS12105 1 161M 89.69

End Caps 150mm PS6101 1 10 161M 7.70225mm PS10101 1 161M 27.82300mm PS12101 1 161M 41.76

Socket Plug 150mm PS620 1 10 161M 18.36225mm PS1020 1 161M 39.94300mm PS1220 1 161M 95.36

Spare Polysewer 150mm PSSP1 1 10 161M 1.31Seals 225mm PSSP2 1 10 161M 2.67

300mm PSSP3 1 10 161M 5.53Snap Cap and 150mm To accept EN1401-1 solid wall pipes and PS6104 1 10 161M 7.40Seals to adapt to 90° junctions



SEWERDRAIN GRAVITY SEWER SYSTEM PVCu TERRACOTTA BROWN UNLESS OTHERWISE STATED EN1401-1

Single Socket 200mm 3m UG832 1 23 52E 89.58Pipe 200mm 6m UG862 1 23 52E 162.86

250mm 3m UG1032 1 14 52E 134.67250mm 6m UG1062 1 14 52E 244.84315mm 3m UG1232 1 8 52E 217.39315mm 6m UG1262 1 8 52E 395.28

Plain Ended Pipe 200mm 3m UG830 1 23 52E 74.01200mm 6m UG860 1 23 52E 148.06250mm 3m UG1030 1 14 52E 113.23250mm 6m UG1060 1 14 52E 225.58315mm 3m UG1230 1 8 52E 183.28315mm 6m UG1260 1 8 52E 362.04

Perforated Pipe 200mm 6m single socketed UG869 1 23 52E 183.91250mm 6m single socketed UG1069 1 14 52E 267.93315mm 6m single socketed UG1269 1 8 52E 429.38

Rocker Pipe 200mm 600mm length Sand coated one end UGT899 1 52E 11.87250mm 600mm length Sand coated one end UGR1099 1 52E 16.30315mm 600mm length Sand coated one end UGR1299 1 52E 28.67

Couplers 200mm Double Socket (Remove Centre Stop for UG801 1 10 53M 21.56use as Slip Coupling)

250mm Double Socket (Remove Centre Stop for UG1001 1 5 53M 28.67use as Slip Coupling)

315mm Double Socket UG1201 1 53M 64.63315mm Slip Coupler (Double Socket) UG1200 1 53M 83.06

Single Socket 200mm 87½° Single Socket UG812 1 53M 49.98Bends 200mm 45° Single Socket UG804 1 53M 45.73

200mm 15° Single Socket UG810 1 53M 41.67250mm 87½° Single Socket UG1012 1 53M 203.23250mm 45° Single Socket UG1004 1 53M 135.53250mm 30° Single Socket UG1068 1 53M 119.53250mm 15° Single Socket UG1010 1 53M 97.83315mm 87½° Single Socket UG1212 1 53M 281.46315mm 45° Single Socket UG1204 1 53M 216.83315mm 30° Single Socket UG1268 1 53M 190.21315mm 15° Single Socket UG1210 1 53M 173.87

Double Socket 200mm 45° Double Socket UG803 1 53M 52.07Bends 200mm 15° Double Socket UG809 1 53M 45.87

Equal Junctions 200mm 45° Double Socket UG806 1 53M 76.83200mm 45° Triple Socket UG805 1 53M 79.15250mm 45° Double Socket UG1006 1 53M 248.28315mm 45° Double Socket UG1206 1 53M 414.45

Unequal Junctions 200mm 45° Double Socket (110mm) UG836 1 53M 56.22200mm 45° Double Socket (160mm) UG837 1 53M 58.29200mm 45° Triple Socket (110mm) UG835 1 53M 58.34200mm 45° Triple Socket (160mm) UG831 1 53M 60.67250mm 45° Double Socket (110mm) UG1036 1 53M 176.06250mm 45° Double Socket (160mm) UG1016 1 53M 177.24250mm 45° Double Socket (200mm) UG1017 1 53M 206.98315mm 45° Double Socket (110mm) UG1236 1 53M 257.19315mm 45° Double Socket (160mm) UG1216 1 53M 268.07315mm 45° Double Socket (200mm) UG1217 1 53M 336.39315mm 45° Double Socket (250mm) UG1218 1 53M 461.00

Plain Socket Plugs 200mm UG820 1 53M 12.93250mm UG1020 1 53M 36.09315mm UG1220 1 53M 64.41

Level Invert 200mm 200mm to 160mm Socket/Spigot UG821 1 53M 32.09Reducers 250mm 250mm to 200mm Socket/Spigot UG1021 1 53M 63.14

315mm 315mm to 250mm Socket/Spigot UG1221 1 53M 103.51


COMPONENT PRODUCT SIZE RANGE A/B MIN LENGTH C CODE PACK BULK BAG/ PRODUCT PRICEDESCRIPTION MM MM NO. QTY PALLET QTY GROUP CODE EACH £

FLEXICON - FLEXIBLE RUBBER COUPLERS AND ADAPTORS EN295-1, Shear Band Couplingsto WIS4-41-01 EN681-1 EPDM Rubber

Flexicon Universal 120-135/100-115 100 XAC400 1 107M 13.97Adaptors (XAC) 180-200/160-180 150 XAC600 1 107M 35.89

260-285/180-205 150 XAC800 1 107M 62.42Flexicon Drainage 100-115/75-85 100 XAC85/115 1 107M 22.10Adaptors (XAC) 100-115/85-95 100 XAC95/115 1 107M 22.46

130-145/110-125 120 XAC125/145 1 107M 28.92145-160/110-125 120 XAC125/160 1 107M 29.40145-160/125-140 120 XAC140/160 1 107M 33.66150-165/100-115 120 XAC115/165 1 107M 31.19160-175/110-125 120 XAC125/175 1 107M 34.33170-185/145-160 120 XAC160/185 1 107M 36.53175-190/110-125 120 XAC125/190 1 107M 35.80175-190/125-140 120 XAC140/190 1 107M 36.76180-195/160-175 120 XAC175/195 1 107M 38.85190-205/110-125 150 XAC125/205 1 107M 38.57195-210/160-175 150 XAC175/210 1 107M 42.10215-230/125-140 150 XAC140/230 1 107M 48.59215-230/145-160 150 XAC160/230 1 107M 53.02213-230/175-190 150 XAC190/230 1 107M 54.22230-245/125-140 150 XAC140/245 1 107M 52.63230-245/145-160 150 XAC160/245 1 107M 56.07230-245/175-190 150 XAC190/245 1 107M 60.26245-260/145-160 150 XAC160/260 1 107M 57.06245-260/175-190 150 XAC190/260 1 107M 59.34

Flexicon Drainage 265-280/145-160 150 XAC160/280 1 107M 68.63Adaptors (XAC) 260-285/240-265 150 XAC900 1 107M 68.28

305-320/145-160 150 XAC160/320 1 107M 70.15305-320/175-190 150 XAC190/320 1 107M 70.79

Flexicon Plumbing 50-65/30-45 80 XPA45/65 1 107M 12.06Adaptors (XPA) 80-95/45-50 100 XPA50/95 1 107M 14.37

100-115/45-50 100 XPA50/115 1 107M 15.3080-95/50-65 100 XPA65/95 1 107M 15.50100-115/50-65 100 XPA65/115 1 107M 17.47

Flexicon Drain 50-65 95 XDR65 1 107M 13.01Couplings (XDR) 70-85 110 XDR85 1 107M 13.72

80-95 110 XDR95 1 107M 13.84100-115 110 XDR115 1 107M 13.46110-125 120 XDR125 1 107M 14.01120-135 120 XDR135 1 107M 14.82135-150 120 XDR150 1 107M 25.10150-165 120 XDR165 1 107M 25.14160-175 120 XDR175 1 107M 31.30160-180 120 XDR180 1 107M 31.62175-200 150 XDR200 1 107M 32.83200-215 150 XDR215 1 107M 35.18200-225 150 XDR225 1 107M 38.30225-250 150 XDR250 1 107M 45.32250-275 150 XDR275 1 107M 52.33

Flexicon Shear 100-115 120 XSB115 1 107M 35.91Band Standard 110-120 120 XSB120 1 107M 36.14Couplings (XSB) 110-125 120 XSB125 1 107M 36.37

120-135 120 XSB135 1 107M 36.67135-150 120 XSB150 1 107M 53.85150-165 120 XSB165 1 107M 55.61160-175 120 XSB175 1 107M 55.87160-180 120 XSB180 1 107M 56.21175-200 150 XSB200 1 107M 56.39190-215 150 XSB215 1 107M 59.84200-225 150 XSB225 1 107M 62.78225-250 150 XSB250 1 107M 65.71250-275 150 XSB275 1 107M 67.44265-290 150 XSB290 1 107M 68.45285-310 190 XSB310 1 107M 113.65295-320 190 XSB320 1 107M 117.12305-335 190 XSB335 1 107M 121.42315-345 190 XSB345 1 107M 123.67345-360 190 XSB360 1 107M 126.68360-385 190 XSB385 1 107M 129.91385-410 190 XSB410 1 107M 138.95

Flexicon End Caps 20-32 XST32 1 107M 5.30(XST) 30-42 XST42 1 107M 5.71

40-50 XST50 1 107M 5.9550-65 XST65 1 107M 6.4680-95 XST95 1 107M 7.99100-115 XST115 1 107M 12.98110-125 XST125 1 107M 14.34120-135 XST135 1 107M 14.68135-150 XST150 1 107M 15.79145-160 XST160 1 107M 16.83165-180 XST180 1 107M 18.22185-200 XST200 1 107M 20.43200-215 XST215 1 107M 21.46


COMPONENT PRODUCT SIZE RANGE A/B MIN LENGTH C CODE PACK BULK BAG/ PRODUCT PRICEDESCRIPTION MM MM NO. QTY PALLET QTY GROUP CODE EACH £


FLEXICON - FLEXIBLE RUBBER COUPLERS AND ADAPTORS EN295-1, Shear Band Couplingsto WIS4-41-01 EN681-1 EPDM Rubber

We offer a Flexicon fabrication service on Reducing Bushes with a 3-4 week turnaround time!

FLEXICON REDUCING BUSHES


POLYSTORM MODULAR WATER STORAGE

Polystorm 1000mm Long x 500mm Wide x 400mm High PSM1 12/15 POAModular Water 40 Tonnes Loading per sq metreStorage Unit 95% Void Ratio

9kg Supplied with 4 Clips & 2 Shear band connectors

Polystorm Lite 1000mm Long x 500mm Wide x 400mm High PSM2 12/15 POAModular Water 20 Tonnes Loading per sq metreStorage Unit 95% Void Ratio

7kgSupplied with 4 Clips & 2 Shear band connectors

Polystorm Xtra Half size 1000mm Long x 500mm Wide x 210mm High PSM3 12/15 POAModular Water 80 Tonnes Loading per sq metreStorage Unit 94% Void Ratio

6kgSupplied with 4 Clips & 2 Shear band connectors

Polystorm 1000mm Long x 500mm Wide x 800mm High POLYSOAK 1 4 155.93Pre-wrapped 2 PSM1s pre-wrapped in a geotextileSoakaway Unit

Flexicon XDR65 11 - 16mm XBC17/19 1 107M 14.34Reducing Bushes XDR65 15 - 20mm XBC21/17 1 107M 14.35(XBC) XDR65 20 - 25mm XBC26/14 1 107M 14.34

XDR65 30 - 37mm XBC37/09 1 107M 13.17XDR65 35 - 40mm XBC43/06 1 107M 13.17XSB115 55 - 65mm XBC65/23 1 107M 24.72XSB115 65 - 76mm XBC76/17 1 107M 22.49XSB115 85 - 95mm XBC95/08 1 107M 20.28XSB120 55 - 65mm XBC65/27 1 107M 36.89XSB120 82 - 92mm XBC95/12 1 107M 25.91XSB115 92.5 - 98mm XBC95/05 1 107M 4.52XSB115 95 - 105mm XBC105/05 1 107M 4.42XSB125 105 - 115mm XBC115/05 1 107M 4.79XSB135 115 - 125mm XBC125/05 1 107M 4.88XDR95 73 - 82mm XBC85/08 1 107M 5.57XSB115 83 - 92mm XBC90/08 1 107M 6.13XSB120 95 - 105mm XBC105/08 1 107M 19.79XSB135 107 - 117mm XBC120/08 1 107M 6.78XSB150 125 - 135mm XBC140/08 1 107M 7.78XSB165 140 - 150mm XBC150/08 1 107M 7.85XSB175 150 - 160mm XBC165/08 1 107M 8.27XSB200 175 - 185mm XBC184/08 1 107M 8.78XSB200 175 - 185mm XBC190/08 1 107M 9.10XSB225 200 - 210mm XBC215/08 1 107M 9.36XSB250 225 - 235mm XBC245/08 1 107M 9.97XSB275 245 - 255mm XBC255/08 1 107M 11.15XSB135 110 - 120mm XBC125/08 1 107M 6.83XSB150 110 - 120mm XBC125/16 1 107M 11.84XSB165 125 - 135mm XBC135/16 1 107M 13.04XSB175 135 - 145mm XBC150/16 1 107M 14.08XSB200 160 - 170mm XBC168/16 1 107M 15.84XSB215 160 - 170mm XBC175/16 1 107M 15.78XSB225 185 - 195mm XBC200/16 1 107M 16.97XSB250 210 - 220mm XBC230/16 1 107M 17.84XSB275 230 - 240mm XBC240/16 1 107M 18.99XSB225 170 - 180mm XBC185/24 1 107M 21.87XSB250 190 - 200mm XBC210/24 1 107M 23.08XSB250 205 - 215mm XBC225/16 1 107M 17.38XSB275 210 - 220mm XBC225/24 1 107M 24.10XSB290 265 - 275mm XBC275/08 1 107M 11.86

Flexidriver 7mm Flexidriver XFD700 1 107M 14.93(Flexible 8mm Flexidriver XFD800 1 107M 14.93Screwdriver) 8mm Ridgidriver XTB800 1 107M 14.93



POLYSTORM MODULAR WATER STORAGE


PSMBBSCPSMCLIP

PSMFA110/150/160

PSMC

UG621

PSMSTA160/15

COMPONENT PRODUCT SIZE LENGTH/ CODE PRODUCT PRICEDESCRIPTION DESCRIPTION NO. GROUP CODE EACH £

RAINSTREAM HOME XL TANKS


GENERAL PURPOSE DUCT SYSTEM PVCu

NEW

6m Single Socket 2”/54mm Nominal OD: 54mm, Nominal ID: 51.0mm DUCT 2A 1 8.84Lengths per Bale: 260

PVCu General 3”/90mm Nominal OD: 88.9mm, Nominal ID: 85.0mm DUCT 3 1 12.93Lengths per Bale: 144

Purpose Duct 4”/114.8mm Nominal OD: 114.3mm, Nominal ID: 110.4mm DUCT 4B 1 14.83Lengths per Bale: 86

6”/168mm Nominal OD: 168.3mm, Nominal ID: 162.9mm DUCT 6B 1 26.97Lengths per Bale: 36

Duct Couplings 54mm DUCT 2AC 1 2.05 90mm DUCT 3C 1 3.10114mm DUCT 4BC 1 3.44168mm DUCT 6BC 1 3.81

90° Duct Bend 54mm DUCT 2AX90 1 4.67Single Socket 90mm DUCT 3X90 1 5.20

114mm DUCT 4BX90 1 6.46168mm DUCT 6BX90 1 15.00

Polystorm Brick Bond connector PSMBBSC 30 POAAccessories Spare Polystorm clips PSMCLIP 60 POA

Spare Polystorm shear connectors PSMSC 30 POA150mm Ridgidrain flange adaptor PSMFA150 1 POA110mm EN1401-1 flange adaptor PSMFA110 1 POA160mm EN1401-1 flange adaptor PSMFA160 1 POA

Underground 160mm x 110mm single socket level invert reducer UG621 1 22.23Drainage 150mm Ridgidrain socket x 160mm EN1401-1 ARD150160 1 POAAccessories Spigot AdaptorBasic Silt Trap Adjustable sump level and height to cover PSMST160 1 POA

(risers and seals required)160mm inlet and outlet

Advanced Silt Trap Stainless steel silt bucket for larger objects, PSMSTA160/15 1 POAsecondary filtration for smaller particles

Bucket and filter easily removed for cleaning,For use where invert level does not exceed 1.2m

15 litres per second max flow rate.160mm inlet and outlet.

Mini Silt Trap 320mm dia x 600mm height, 110mm inlet and PSMST110 1 POAoutlet Silt bucket included, max burial depth 1m

Silt Trap 460mm dia Circular Cover and Frame complete UG511 1 64.34Accessories with seals and fixing screws (35kN test load)

Square PP Cover and Frame complete with seals UG512 1 87.72and fixing screws (35kN test load)

Reduced Access Square PP Cover and Frame ICDC1 1 91.82with seals and fixing screws (35kN test load)Silt Trap side riser (215mm effective height) ICDR1 1 40.19

Silt Trap sealing ring UG488 1 3.65

Flow Control Unit 460mm dia x 1200mm high, 2 x 110mm inlet, PSMFC160/30 1 POA1 x 110mm outlet, 160mm Overflow.

Max burial depth 1.2mSuitable for 0.4mm deep Polystorm Storage

Structures only.

Rainstream Home 1500 litre Incorporating a leaf filter suitable for draining areas more than 150m2 RWH.RHXL.BGFT.1.5 POA

XL Tanks 2500 litre Incorporating a leaf filter suitable for draining areas more than 150m2 RWH.RHXL.BGFT.2.5 POA

3000 litre Incorporating a leaf filter suitable for draining areas more than 150m2 RWH.RHXL.BGFT.3 POA

4500 litre Incorporating a leaf filter suitable for draining areas more than 150m2 RWH.RHXL.BGFT.4.5 POA

5500 litre Incorporating a leaf filter suitable for draining areas more than 150m2 RWH.RHXL.BGFT.5.5 POA

Component Sets Pressurised System Components RWH.CSCS.P.HOME POA

Gravity System Components RWH.CSCS.G.HOME POA



LAND DRAINAGE PIPES AND COUPLERS PVCu Blue Pipe to BS4962 - Each Coil supplied complete with coupler

TWIN WALLCOMPONENT PRODUCT SIZE LENGTH/ CODE PACK BULK BAG/ PRODUCT PRICE

DESCRIPTION DESCRIPTION NO. QTY PALLET QTY GROUP CODE EACH £


GENERAL PURPOSE DUCT SYSTEM PVCu

Solid Twinwall 150mm x 6mm Plain Ended TW150X6PE 1 16.23225mm x 6mm Plain Ended TW225X6PE 1 40.50300mm x 6mm Plain Ended TW300X6PE 1 62.95

Perf Twinwall 150mm x 6mm Plain Ended TW150X6PEP 1 17.04225mm x 6mm Plain Ended TW225X6PEP 1 42.53300mm x 6mm Plain Ended TW300X6PEP 1 66.10

Twinwall Double 150mm CRD150 1 2.62Socket Coupling 225mm CRD225 1 5.08

300mm CRD300 1 9.67Twinwall Seal 150mm STW150 1 1.29

225mm STW225 1 2.79300mm STW300 1 4.17

Twinwall Bend 150mm x 150mm 15° BRD150X15 1 14.21150mm x 150mm 30° BRD150X30 1 14.21150mm x 150mm 45° BRD150X45 1 14.21150mm x 150mm 87.5° BRD150X87.5 1 17.49225mm x 225mm 11.25° BRD225X11.25 1 44.04225mm x 225mm 22.5° BRD225X22.5 1 44.04225mm x 225mm 45° BRD225X45 1 44.04225mm x 225mm 90° BRD225X90 1 83.68300mm x 300mm 11.25° BRD300X11.25 1 59.43300mm x 300mm 22.5° BRD300X22.5 1 59.43300mm x 300mm 45° BRD300X45 1 59.43300mm x 300mm 90° BRD300X90 1 96.25

Twinwall Junction 150mm x 150mm 90° JRD150150T 1 23.72150mm x 150mm 45° JRD150150Y 1 23.72225mm x 150mm 90° JRD225150T 1 140.92225mm x 150mm 45° JRD225150Y 1 140.92225mm x 225mm 90° JRD225225T 1 140.92225mm x 225mm 45° JRD225225Y 1 140.92300mm x 150mm 90° JRD300150T 1 196.77300mm x 150mm 45° JRD300150Y 1 196.77300mm x 225mm 90° JRD300225T 1 196.77300mm x 225mm 45° JRD300225Y 1 196.77300mm x 300mm 90° JRD300300T 1 196.77300mm x 300mm 45° JRD300300Y 1 196.77

45° Duct Bend 54mm DUCT 2AX45 1 4.67Single Socket 90mm DUCT 3X45 1 5.20

114mm DUCT 4BX45 1 6.46168mm DUCT 6BX45 1 15.00

Coiled Perforated 60mm x 25m Coil Nominal ID: 50.0mm LD6025 1 26.36Land Drainage 60mm x 50m Coil Nominal ID: 50.0mm LD6050 1 52.70Pipe 60mm x 150m Coil Nominal ID: 50.0mm LD60150 1 140.46

80mm x 25m Coil Nominal ID: 70.5mm LD8025 1 39.5480mm x 50m Coil Nominal ID: 70.5mm LD8050 1 79.1080mm x 100m Coil Nominal ID: 70.5mm LD80100 1 140.45100mm x 25m Coil Nominal ID: 90.0mm LD10025 1 69.68100mm x 50m Coil Nominal ID: 90.0mm LD10050 1 139.34100mm x 100m Coil Nominal ID: 90.0mm LD100100 1 247.45160mm x 25m Coil Nominal ID: 150.0mm LD16025 1 173.63160mm x 45m Coil Nominal ID: 150.0mm LD16045 1 295.68

Land Drainage 60mm HCC60 1 2.13Coupler 80mm HCC80 1 2.38

100mm HCC100 1 2.68160mm HCC160 1 3.03

Multi Y Junction 80 x 100mm (Do Not Solvent Weld Polypropylene) CDJ10M 1 7.01160mm (Do Not Solvent Weld Polypropylene) CDJ160M 1 13.42

NEW

NEW


ANCILLARIES

RIDGICOIL & POLYDUCT



RIDGIDUCT


CD121CD126

CD124CD122

CD123

CD127


GULLYS AND CHANNEL DRAINAGE

CD121CD126

CD124CD122

CD123

CD127

Ridgiduct Twin 94mm x 6m RB94X6 1 11.19Wall Duct 125mm x 6m RB125X6 1 24.69

150mm x 6m RB150X6 1 28.53

Ridgiduct 94mm Black RBC94 1 2.24Coupling 125mm Black RBC125 1 4.53

150mm Black RBC150 1 2.62

Corrugated 150mm x 25m RF150X25 1 178.88RidgiflexAccess Chamber T 450mm x 450mm x 1000mm AC45045031 1 75.68

Midi-Gully Yard Gully 300mm x 600mm (110mm Spigot Outlet) RG300/600 1 36 57.24Yard Gully Aluminium Silt Bucket RGSB 1 73.12For domestic and Cast Iron Grating (C250+ Loading Classification) RGG 1 227.23smaller capacityindustrial andcommercial applications(Black HDPE,corrugated forextra strength)

Ridgigully Road 450 x 750mm Corrugated Road Gully RG450/750 1 16 62.01Gully 450 x 900mm Corrugated Road Gully RG450/900 1 16 64.41(Black HDPE, Gully Adaptor, 150mm Twin Wall or Supersleeve ARG634 1 20 13.08corrugated for Gully Adaptor, 150mm Polysewer PS689 1 10 32.67extra strength)

Domestic Channel 1m Channel with slotted galvanised steel grating CD121 1 45 41.44Drainage System End Cap (Plain) CD122 1 7.67(Polyester Concrete) Vertical Spigot Outlet (uPVC to 110mm CD123 1 1.75Load Class A15 Underground Socket)(15kN)

For use Horizontal Spigot End Outlet CD124 1 24.21only in drives, (uPVC to 110mm Underground Socketparking and Self locking grating CD125 1 2.02pedestrian areas, 500mm Silt Box with galvanised steel grating CD126 1 156.83playgrounds and and bucketpatios 1m slotted galvanised steel grating CD127 1 19.68

(SPARE) 100mm wide

Electric Ridgicoil 50mm x 50m Black RC50X50BE 1 53.3550mm x 50m Yellow RC50X50Y 1 53.3563mm x 50m Black RC63X50BE 1 58.3063mm x 50m Yellow RC63X50Y 1 58.3063mm x 50m Blue RC63X50BL 1 58.30110mm x 50m Black RC110X50BE 1 91.40

Polyduct 38mm x 100m Black Electric Polyduct PD3844X100BEPE 1 204.0750mm x 25m Black Electric Polyduct PD5060X25BEPE 1 101.52

NEW

NEW



POLYGUARD BARRIER PIPE & FITTINGS

• Conforms with Type A: WIS 4-32-19: Polyethylene pressure pipe systems with an aluminium barrier layer for potable water supply in contaminated land• Complies with BS6920 Water Quality Testing• Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000

PGF25SC

PGF25MTC

PGF25FTC

PGF2590E

PGF2515TC

PGF2525TC

PGF25T

Polyguard 25mm Polyguard pipe x 50m coil PGP2550 119E 394.20

Barrier Pipe 32mm Polyguard pipe x 50m coil PGP3250 119E 509.22

63mm Polyguard pipe x 6m length PGP636 119E 167.18

63mm Polyguard pipe x 25m coil PGP6325 119E 696.60

63mm Polyguard pipe x 50m coil PGP6350 119E 1,393.20

Polyguard 25mm Polyguard straight coupling PGF25SC 119M 19.09

Fittings 32mm Polyguard straight coupling PGF32SC 119M 27.56

63mm Polyguard straight coupling PGF63SC 119M 74.08

25mm Polyguard x 3/4" MBSP coupling PGF25MTC 119M 9.49

32mm Polyguard x 1"MBSP coupling PGF32MTC 119M 15.11

63mm Polyguard x 2" MBSP coupling PGF63MTC 119M 59.67

25mm Polyguard x 3/4" FBSP coupling PGF25FTC 119M 9.49

32mm Polyguard x 1" FBSP coupling PGF32FTC 119M 15.11

63mm Polyguard x 2" FBSP coupling PGF63FTC 119M 44.45

25mm Polyguard 90º elbow PGF2590E 119M 28.44




25mm Polyguard equal tee PGF25T 119M 50.89



25mm x 15mm Polyguard to copper transition coupling PGF2515TC 119M 30.19

25mm x 22mm Polyguard to copper transition coupling PGF2522TC 119M 35.15

25mm x 25mm Polyguard to PE transition coupling PGF2525TC 119M 16.49



COMPONENT PRODUCT SIZE LENGTH/ CODE BLUE BLACK PRODUCT PRICEDESCRIPTION DESCRIPTION NO. (BU) (B) GROUP CODE EACH £

COMPONENT PRODUCT SIZE WEIGHT (KG/M), CODE BLUE BLACK PRODUCT PRICEDESCRIPTION MIN WALL THICKNESS (MM) NO. (BU) (B) GROUP CODE EACH £

WATER SERVICE PIPES MDPE PE80

GEOTHERMAL PIPE & FITTINGS EN12201-2 For use with Ground Source Heat Pumps Black MDPE PE80 SDR17.For all other fitting requirements please use Polyfast Compression Fittings to be used in conjunction with geothermal pipe stiffeners Pgs 36 to 40

BSEN12201-2

MDPE PE80 20mm x 25m Coil 0.13kg/m, 2.3mm 2025 • • 70E 38.5912 Bar Pressure 20mm x 50m Coil 0.13kg/m, 2.3mm 2050 • • 70E 77.19Pipe 20mm x 100m Coil 0.13kg/m, 2.3mm 20100 • • 70E 154.33

20mm x 150m Coil 0.13kg/m, 2.3mm 20150 • • 70E 231.5225mm x 25m Coil 0.17kg/m, 2.3mm 2525 • • 70E 49.2325mm x 50m Coil 0.17kg/m, 2.3mm 2550 • • 70E 98.4525mm x 100m Coil 0.17kg/m, 2.3mm 25100 • • 70E 196.9225mm x 150m Coil 0.17kg/m, 2.3mm 25150 • • 70E 295.3632mm x 25m Coil 0.28kg/m, 3.0mm 3225 • • 70E 82.5032mm x 50m Coil 0.28kg/m, 3.0mm 3250 • • 70E 165.0232mm x 100m Coil 0.28kg/m, 3.0mm 32100 • • 70E 330.0032mm x 150m Coil 0.28kg/m, 3.0mm 32150 • • 70E 495.0040mm x 100m Coil 0.43kg/m, 3.0mm 40100 • 70E 513.2250mm x 6m Length 0.67kg/m, 4.6mm 5006 • • 70E 47.4650mm x 25m Coil 0.67kg/m, 4.6mm 5025 • • 70E 197.69

Geothermal Pipe 32mm 100m Coil 32100G • 73E 303.5932mm 250m Coil 32250G • 73E 759.0132mm 300m Coil 32300G • 73E 910.7832mm 400m Coil 32400G • 73E 1,214.3740mm 100m Coil 40100G • 73E 472.1540mm 250m Coil 40250G • 73E 1,180.3940mm 300m Coil 40300G • 73E 1,416.4640mm 400m Coil 40400G • 73E 1,888.62

Stop End 32mm 30932 79M 1.4140mm 30940 79M 2.81

Plastic Pipe 32mm 47432 79M 0.53Stiffener 40mm 47440 79M 0.76


POLYFAST POLYETHYLENE COMPRESSION FITTINGS To WIS 4-32-11 Adaptable for Polyethylene, Lead, Copper, PVC and Galvanised Iron


Parallel BSP threadto BS21 - Use PTFEtape to seal thethreads

Stainless Steelreinforcing shroud

Copper/polybutylenesocket is Push-fit toBS7291/2: 1990

Taper BSP thread toBS21- Use PTFE tapeto seal the threads

Stainless Steelreinforcing shroudParallel BSP thread to BS21- Use PTFE tapeto seal the threads

Taper BSP threadto BS21- Use PTFE tapeto seal the threads

COMPONENT PRODUCT SIZE WEIGHT (KG/M), CODE BLUE BLACK PRODUCT PRICEDESCRIPTION MIN WALL THICKNESS (MM) NO. (BU) (B) GROUP CODE EACH £

WATER SERVICE PIPES MDPE PE80 BSEN12201-2

MDPE PE80 50mm x 50m Coil 0.67kg/m, 4.6mm 5050 • • 70E 395.3412 Bar Pressure 50mm x 100m Coil 0.67kg/m, 4.6mm 50100 • • 70E 790.66Pipe 50mm x 150m Coil 0.67kg/m, 4.6mm 50150 • • 70E 1,186.03

63mm x 6m Length 1.05kg/m, 5.8mm 6306 • • 70E 74.4063mm x 25m Coil 1.05kg/m, 5.8mm 6325 • • 70E 310.0663mm x 50m Coil 1.05kg/m, 5.8mm 6350 • • 70E 620.1063mm x 100m Coil 1.05kg/m, 5.8mm 63100 • • 70E 1,240.2463mm x 150m Coil 1.05kg/m, 5.8mm 63150 • • 70E 1,860.34

MDPE PE80 50mm x 100m Coil 0.40kg/m, 2.9mm 5008100B • 70E 477.398 Bar Pressure Pipe 63mm x 100m Coil 0.64kg/m, 3.6mm 6308100B • 70E 763.81

Straight Coupler 20mm 40020 10 79M 2.9925mm 40025 10 79M 3.3532mm 40032 5 79M 8.0740mm 40040 2 79M 10.6550mm 40050 2 79M 17.6463mm 40063 2 79M 25.90

Slip/Repair Coupler 20mm 40020S 10 79M 3.8725mm 40025S 10 79M 4.7032mm 40032S 5 79M 10.2040mm 40040S 2 79M 14.2050mm 40050S 2 79M 21.3463mm 40063S 2 79M 29.66

Reducing Coupler 25mm 25 x 20mm 40625 10 79M 6.2332mm 32 x 20mm 4063220 5 79M 10.7532mm 32 x 25mm 40632 5 79M 10.7540mm 40 x 32mm 40640 2 79M 14.2050mm 50 x 32mm 4065032 2 79M 19.6950mm 50 x 40mm 40650 2 79M 19.69

Metric to Imperial 20mm 20mm x ½˝ 48120 10 79M 4.09Coupler 25mm 25mm x ½˝ 4812512 10 79M 5.24

25mm 25mm x ¾" 48125 10 79M 5.24Imperial Male ½˝ 49012 10 79M 4.09Iron x PE Coupler ¾˝ 49034 10 79M 5.38

1˝ 4901 5 79M 8.16Copper/ 20mm 20mm x 15mm (½˝) 47820 10 79M 3.54Polybutylene 25mm 25mm x 15mm (½˝) 4782515 10 79M 4.02Adaptor 25mm 25mm x 22mm (¾˝) 47825 10 79M 4.53

32mm 32mm x 22mm (¾˝) 4783222 5 79M 9.0532mm 32mm x 28mm (1˝) 47832 5 79M 9.50

Female Adaptor 20mm 20mm x ½˝ BSP 40320 10 79M 3.5425mm 25mm x ½˝ BSP 4032512 10 79M 3.6625mm 25mm x ¾˝ BSP 40325 10 79M 3.8732mm 32mm x 1˝ BSP 40332 5 79M 5.3240mm 40mm x 1¼˝ BSP 40340 2 79M 11.0150mm 50mm x 1½˝ BSP 40350 2 79M 14.3363mm 63mm x 2˝ BSP 40363 2 79M 20.64

Male Adaptor 20mm 20mm x ½˝ BSP 40420 10 79M 2.7425mm 25mm x ½˝ BSP 4042512 10 79M 3.5425mm 25mm x ¾˝ BSP 40425 10 79M 3.6032mm 32mm x 1˝ BSP 40432 5 79M 5.5240mm 40mm x 1¼˝ BSP 40440 2 79M 10.3550mm 50mm x 1½˝ BSP 40450 2 79M 13.0963mm 63mm x 2˝ BSP 40463 2 79M 17.65

Elbow 20mm 40120 10 79M 3.9125mm 40125 10 79M 5.7532mm 40132 5 79M 9.6440mm 40140 2 79M 15.8350mm 40150 2 79M 20.2563mm 40163 2 79M 26.87

Reducing Elbow 25mm 25mm x 20mm 90° Reducing 4012520 10 79M 7.52Reducing Female 20mm 20mm x ½˝ BSP Female 42120 10 79M 3.54Elbow 25mm 25mm x ¾˝ BSP Female 42125 10 79M 5.10

32mm 32mm x 1˝ BSP Female 42132 5 79M 8.3940mm 40mm x 1¼˝ BSP Female 42140 2 79M 10.2050mm 50mm x 1½˝ BSP Female 42150 2 79M 18.4663mm 63mm x 2˝ BSP Female 42163 2 79M 23.99




Taper BSP thread toBS21 - Use PTFEtape to seal thethreads

Reducing Male 20mm 20mm x ½˝ BSP Male 42320 10 79M 2.98Elbow 25mm 25mm x ¾˝ BSP Male 42325 10 79M 3.35

Equal Tee 20mm 40220 10 79M 5.5225mm 40225 10 79M 8.5532mm 40232 5 79M 11.9940mm 40240 2 79M 21.9050mm 40250 2 79M 25.6463mm 40263 1 79M 38.26

Branch Reducing 25mm 25mm x 20mm 41125 10 79M 10.50Tee 32mm 32mm x 20mm 4113220 5 79M 11.84

32mm 32mm x 25mm 41132 5 79M 12.69BSP Branch Tee 20mm 20mm x ½˝ BSP Female 42220 10 79M 5.07

25mm 25mm x ¾˝ BSP Female 42225 10 79M 8.3932mm 32mm x 1˝ BSP Female 42232 5 79M 11.2840mm 40mm x 1¼˝ BSP Female 42240 2 79M 17.3250mm 50mm x 1½˝ BSP Female 42250 2 79M 23.7063mm 63mm x 2˝ BSP Female 42263 1 79M 33.7420mm 20mm x ½˝ BSP Male 42420 10 79M 7.7125mm 25mm x ¾˝ BSP Male 42425 10 79M 9.24

End Plug 20mm 40920 10 79M 3.6025mm 40925 10 79M 4.2732mm 40932 5 79M 5.9340mm 40940 2 79M 12.4150mm 40950 2 79M 15.2963mm 40963 2 79M 21.34

Stop End 20mm 30920 10 79M 0.9625mm 30925 10 79M 1.2132mm 30932 5 79M 1.4140mm 30940 2 79M 2.8150mm 30950 2 79M 2.7863mm 30963 2 79M 4.00

Plastic Pipe 20mm 46420 10 79M 0.35Stiffener 25mm 46425 10 79M 0.40

32mm 46432 10 79M 0.5340mm 46440 10 79M 0.7650mm 46450 10 79M 0.7963mm 46463 10 79M 0.89

8 Bar Plastic Pipe 50mm 47450 10 79M 0.92Stiffener 63mm 47463 10 79M 1.07

MDPE High Flow 25mm 25mm x 20mm 4802520 10 79M 2.24Reducing Set 32mm 32mm x 20mm 4803220 5 79M 3.03

32mm 32mm x 25mm 4803225 5 79M 3.0350mm 50mm x 20mm 4805020 5 79M 6.1950mm 50mm x 25mm 4805025 5 79M 6.1950mm 50mm x 32mm 4805032 5 79M 6.1963mm 63mm x 20mm 4806320 5 79M 9.2463mm 63mm x 25mm 4806325 5 79M 9.2463mm 63mm x 32mm 4806332 5 79M 9.2463mm 63mm x 50mm 4806350 5 79M 9.24

MDPE Reducing 25mm 25mm x 20mm 4712520 10 79M 2.19Set 32mm 32mm x 20mm 4713220 5 79M 3.03

32mm 32mm x 25mm 4713225 5 79M 3.0350mm 50mm x 20mm 4715020 5 79M 6.1950mm 50mm x 25mm 4715025 5 79M 6.1950mm 50mm x 32mm 4715032 5 79M 6.1963mm 63mm x 20mm 4716320 5 79M 9.2463mm 63mm x 25mm 4716325 5 79M 9.2463mm 63mm x 32mm 4716332 5 79M 9.2463mm 63mm x 50mm 4716350 5 79M 9.24

Copper Adaptor 20mm 20mm x 15mm Cu 46820 10 79M 2.06Set 25mm 25mm x 15mm Cu 4682515 10 79M 3.03

25mm 25mm x 22mm Cu 46825 10 79M 2.5532mm 32mm x 28mm Cu 46832 5 79M 3.72

Lead Adaptor Set 20mm 20mm x 3/8˝ 5lb 46920 10 79M 1.2525mm 25mm x ½˝ 7lb 46925 10 79M 1.4132mm 32mm x ¾˝ 11lb 46932 5 79M 1.6532mm 32mm x ¾˝ 9lb 469329 5 79M 1.6540mm 40mm x 1˝ 16lb 46940 2 79M 3.46



PE x Lead(including stiffener)


Low DensityBS1972:1967Class CTo connect 3/8”use 1/2” 467NG12with 20mm Nutand Body

Low DensityBS1972:1967Class D

High DensityBS3284:1967Class C

High DensityBS3284:1967Class D

Low DensityBS1972:1961Normal GaugeIS134:1977

PVC BS3505/6GalvanisedIron BS1387

Low DensityBS1972:1961Heavy GaugeIS134:1977

Wider Tolerance 25mm 25mm x 3/8˝ 5lb 479385 10 79M 5.41Lead Coupler 25mm 25mm x ½˝ 7lb 479127 10 79M 5.15

25mm 25mm x ½˝ 9lb 479129 10 79M 6.1125mm 25mm x ¾˝ 9lb 479349 10 79M 8.6032mm 32mm x ¾˝ 11lb 4793411 5 79M 15.9032mm 32mm x 1˝ 16lb 479116 5 79M 21.09

Mid Blue 20mm 20mm x ½˝ 465C12 10 79M 0.55Polyethylene 25mm 25mm x ¾˝ 465C34 10 79M 0.70Adaptor Set 32mm 32mm x 1˝ 465C1 10 79M 0.83

50mm 50mm x 1¼˝ 465C114 2 79M 1.8150mm 50mm x 1½˝ 465C112 2 79M 2.4663mm 63mm x 2˝ 465C2 2 79M 3.72

Light Green 25mm 25mm x ½˝ 465D12 10 79M 0.55Polyethylene 25mm 25mm x ¾˝ 465D34 10 79M 0.70Adaptor Set 32mm 32mm x 1˝ 465D1 10 79M 0.83

50mm 50mm x 1¼˝ 465D114 2 79M 1.8150mm 50mm x 1½˝ 465D112 2 79M 2.46

Dark Blue 20mm 20mm x ½˝ 466C12 10 79M 0.55Polyethylene 25mm 25mm x ¾˝ 466C34 10 79M 0.70Adaptor Set 32mm 32mm x 1˝ 466C1 10 79M 0.83

50mm 50mm x 1¼˝ 466C114 2 79M 1.8150mm 50mm x 1½˝ 466C112 2 79M 2.4663mm 63mm x 2˝ 466C2 2 79M 3.72

Dark Green 20mm 20mm x 3/8�˝ 466D38 10 79M 0.85Polyethylene 20mm 20mm x ½˝ 466D12 10 79M 0.55Adaptor Set 25mm 25mm x ¾˝ 466D34 10 79M 0.70

32mm 32mm x 1˝ 466D1 10 79M 0.8350mm 50mm x 1¼˝ 466D114 2 79M 1.8150mm 50mm x 1½˝ 466D112 2 79M 2.4663mm 63mm x 2˝ 466D2 2 79M 3.72

Red Polyethylene 20mm 20mm x ½˝ 467NG12 10 79M 0.85Adaptor Set 25mm 25mm x ¾˝ 467NG34 10 79M 1.02

32mm 32mm x 1˝ 467NG1 10 79M 1.2550mm 50mm x 1¼˝ 467NG114 2 79M 2.7450mm 50mm x 1½˝ 467NG112 2 79M 3.1963mm 63mm x 2˝ 467NG2 2 79M 5.16

Light Blue 20mm 20mm x ½˝ 467HG12 10 79M 0.85Polyethylene 25mm 25mm x ¾˝ 467HG34 10 79M 1.02Adaptor Set 32mm 32mm x 1˝ 467HG1 10 79M 1.25

50mm 50mm x 1¼˝ 467HG114 2 79M 2.7450mm 50mm x 1½˝ 467HG112 2 79M 3.19

PVC/Galvanised 20mm 20mm x 3/8�˝ 4722038 10 79M 2.06Iron Adaptor 25mm 25mm x ½˝ 4722512 10 79M 2.89

32mm 32mm x ¾˝ 4723234 10 79M 3.4640mm 40mm x 1˝ 47240 5 79M 5.24

Bibtap Wall Flange 20mm 20mm x ½˝ BSP 41320 2 79M 12.88(DZR Brass) 25mm 25mm x ½˝ BSP 41325 2 79M 13.18

25mm 25mm x ¾˝ BSP 4132534 2 79M 15.90

Bibtap Wall Flange 20mm 20mm x ½˝ BSP 48320 2 79M 6.46(Plastic) 25mm 25mm x ½˝ BSP 4832512 2 79M 6.60

25mm 25mm x ¾˝ BSP 48325 2 79M 7.99

Gunmetal 20mm 41020 2 79M 33.54Stop Cock 25mm 41025 2 79M 45.93

32mm 41032 1 79M 79.881½˝ F.I. 31050 1 71M 151.452˝ F.I. 31063 1 71M 223.07

Plastic Stop Cock 20mm 42620 2 79M 17.0425mm 42625 2 79M 25.1932mm 42632 1 79M 41.31

Square Drive 20mm 49120 2 79M 17.04Stop Cock 25mm 49125 2 79M 25.19(Engineering

Plastic)





ELECTROFUSION FITTINGS TO WIS 4-32-08

Electrofusion 20mm EF20C 73M 5.55Coupler 25mm EF25C 73M 5.55

32mm EF32C 73M 5.5550mm EF50C 73M 9.7363mm EF63C 73M 9.73

Electrofusion 25mm 25mm x 20mm EF25R 73M 6.54Reducer 32mm 32mm x 20mm EF3220R 73M 6.54

32mm 32mm x 25mm EF32R 73M 6.5463mm 63mm x 50mm EF63R 73M 23.85

Electrofusion 25mm 90˚ EF2590 73M 12.69Elbows 32mm 90˚ EF3290 73M 12.82

50mm 90˚ EF5090 73M 26.3163mm 90˚ EF6390 73M 25.7632mm 45˚ EF3245 73M 14.8450mm 45˚ EF5045 73M 23.1863mm 45˚ EF6345 73M 25.76

Electrofusion Tee 25mm EF25T 73M 16.1132mm EF32T 73M 15.0450mm EF50T 73M 32.4963mm EF63T 73M 29.11

Electrofusion 50mm 50mm x 32mm EF5032S 73M 25.67Tapping Tee 63mm 63mm x 32mm EF6332S 73M 25.67

Stop Cock 20mm 20mm x 15mm (½˝) Copper 47720 2 79M 17.2825mm 25mm x 15mm (½˝) Copper 4772515 2 79M 17.5525mm 25mm x 22mm (¾˝) Copper 47725 2 79M 22.49

Double Check 20mm 47620 1 79M 24.07Valve 25mm 47625 1 79M 26.18

32mm 47632 1 79M 35.80Single Union ½˝ F.I. 47312 2 79M 14.04Ball Valve ¾˝ F.I. 47334 2 79M 15.55

1˝ F.I. 4731 2 79M 18.73

Threaded ¾˝ ¾˝ x ½˝ BSP 4703412 10 79M 1.85Reducing Bush 1˝ 1˝ x ½˝ BSP 470112 10 79M 2.06

1˝ 1˝ x ¾˝ BSP 470134 10 79M 2.061¼˝ 1¼˝ x 1˝ BSP 4701141 5 79M 3.031½˝ 1½˝ x ½˝ BSP 47011212 5 79M 3.231½˝ 1½˝ x ¾˝ BSP 47011234 5 79M 3.231½˝ 1½˝ x 1˝ BSP 4701121 5 79M 3.231½˝ 1½˝ x 1¼˝ BSP 470112114 2 79M 3.232˝ 2˝ x ½˝ BSP 470212 2 79M 5.002˝ 2˝ x ¾˝ BSP 470234 2 79M 5.002˝ 2˝ x 1˝ BSP 47021 2 79M 5.002˝ 2˝ x 1½˝ BSP 4702112 2 79M 5.003˝ 3˝ x 2˝ BSP 47032 1 79M 9.824˝ 4˝ x 3˝ BSP 47043 1 79M 9.93

Polylink Straight 25mm 25mm x 15/22mm 4841522 1 79M 9.32Universal Transition 25mm 25mm x 21/27mm 4842127 1 79M 10.42Coupler 25mm 25mm x 27/35mm 4842735 1 79M 14.27(c/w Pipe Stiffener) 32mm 32mm x 27/35mm 4882735 1 79M 17.11Polylink 90° Bent 25mm 25mm x 15/22mm 4851522 1 79M 9.72Universal Transition 25mm 25mm x 21/27mm 4852127 1 79M 11.53Coupler 25mm 25mm x 27/35mm 4852735 1 79M 14.27(c/w Pipe Stiffener)




ELECTROFUSION FITTINGS TO WIS 4-32-08

WATER SUPPLY PIPE AND FITTINGS ANCILLARIES

LOFT HATCH

CD

B

A

F

E

InsulatedVersion

UninsulatedVersion

A 733mm

B 656mm

C 639mm

D 562mm

E 600mm

F 532mmLH1, LH4 and LH4WL require supplementaryinsulation (supplied by others) to comply withThe Building Regulations 35TDI and .35TDIWL U Value = 0.35 w/m2 °C

MISCELLANEOUS

(Injection moulded in white polypropylene) Ready to install, boxed with fixing instructions



Pipe Shears 20mm to 32mm PB781 1 123M 13.64

Pipe Cutter 20mm to 32mm PB778 1 123M 20.69

Pipe Cutter 20mm to 32mm PB779 2 123M 10.92Spare Blades

Spigot Reducer 50mm 50mm x 20mm 3085020 71M 6.9050mm 50mm x 25mm 3085025 71M 6.9050mm 50mm x 32mm 3085032 71M 6.9063mm 63mm x 20mm 3086320 71M 8.2863mm 63mm x 25mm 3086325 71M 8.2863mm 63mm x 32mm 3086332 71M 8.2863mm 63mm x 50mm 3086350 71M 8.28

Spigot Stop End 20mm 30920 79M 0.9625mm 30925 79M 1.2132mm 30932 79M 1.4150mm 30950 79M 2.7863mm 30963 79M 4.00

Expansion Tank 4 gallon/18 litre (18" x 12" x 12" Black) EX104 81M 7.81Tank Lid Polypropylene EX105 81M 4.77Galvanised Metal EX106 81M 1.27Backing Plate

Big Tub Bucket 72 Ltr Red, Blue, Green, Brown TUB3 93M 15.75Bucket with Spout 13 Ltr Black BUCKET 1 93M 3.14

Loft Hatch Push-up uninsulated, includes lid and seal LH1 85M 92.48

Hinge down uninsulated quarter turn catch LH4 85M 112.81(c/w Opening Handle)

Hinge down uninsulated lockable LH4WL 85M 121.68

Hinge down insulated quarter turn catch .35TDI 85M 147.66(c/w Opening Handle)

Hinge down insulated lockable .35TDIWL 85M 154.76


GUIDE TO ORDERING PROCEDURES

GENERAL TRADING INFORMATION

To help us improve our service level please ensure your orders:

· State clearly any Special Delivery Instructions, times, access, vehicletypes.

· Product codes always override product descriptions.

· Product codes should be used when placing your order.

· Product pack & bag quantities should be observed and clearly stated.

· When ordering products with colour options please use suffixdetailed at top of page eg Grey (G).

· Carriage paid values detailed below should be considered.

· Complete promptly and return our Logistics fax (this isautomatically sent to you when we create any new delivery pointson your behalf).

· Any order alterations/cancellations will only be accepted up to thepoint when the load is compiled. It is not possible to effectchanges after this.

· We will advise when orders fall short of the carriage paid termsand we have no other orders outstanding to which we can add to.We do not have facility on our system to process and hold lowvalue orders.

Pack Quantities

In order to provide our customers with shorter lead times we arelooking for your support when placing orders.

Therefore to enable us to fulfil this, please place your orders inpack multiple quantities only.

We have carried out extensive research and reduced manyof our pack quantities to satisfy the needs of today’s market.

Products not ordered in pack multiples will be rounded upto the next saleable pack multiple.

Stillage Deliveries

Extrusions are available in wooden frames for mechanical offload.Please refer to pack quantity list for detail.Mixed product frames are not available.

BAGS are only available in stillages by prior arrangement inpre-determined product/pack configuration. A charge will belevied on all metal stillages and refundable on return. A contractwould be established to control and monitor stillage movements.

Delivery Targets

· Merchants stock within a 7 working day period - including dayorder was received.

· Building sites within a 5 working day period - including dayorder was received.

· Other delivery requirements and emergency requests by priorarrangement.

Site Deliveries

We will require logistical information before attempting to deliver to any new sites. Your prompt attention to these requests is important due to the short lead-time expectancy of end users.

Emergency Collections Facility

We do have a pre-booked collection facility for emergency orders.A 48-hour notice period is required to comply with our health andsafety policies.

Carriage Paid Order Values

· Merchant Stock – £300.00 net· Site Deliveries – £700.00 net· Site Deliveries MDPE – £1000.00 net

CarrierWe can offer a 48-hour carrier facility to cater for your urgentrequests. A scale charge will apply for this facility. Details areavailable on request. We do not offer an overnight service.

Claims for Shortages & Damaged Extrusions(Pipes, Gutters and Large Mouldings)

Our drivers will countersign the delivery note as each of theseproducts are offloaded.

Bags

Each bag delivered will be identified with Customer name, loadnumber, individual bag number and total bag count of yourconsignment.

The driver will offload and bag count. He will obtain yoursignature as confirmation that you have received the correctnumber of bags.

Discrepancy Notification

All extrusions - i.e. pipes gutters and large mouldings are listed atthe start of the advice note inventory. Any discrepancies in relationto Pipes, Gutters and Large Mouldings must be noted on theadvice note at the time of delivery.

Bags - Any discrepancy relating to the number of bags deliveredmust be noted on the advice note at the time of delivery. Any discrepancies on bag contents must be advised within 7 days of delivery.

Proof of Deliveries

Proof of delivery signatures for depot deliveries are availableon 01709 770000 (ask for P.O.D.’s). All site deliveries willautomatically be sent a P.O.D. via fax to the depot thatplaced the order.

Return of Products

We do not accept return of any product surplus to requirementunless previously agreed in writing. Last minute customercancellations may also be subject to a cancellation charge. Anyagreed product returns would be subject to 20% re-stockingcharge (£50 minimum).

Terms and Conditions

A full copy of our terms and conditions are detailed overleaf.

TERMS & CONDITIONS

1 GENERAL1.1 In these conditions1.1.1 “the Company” means Polypipe Building Products which is a registered trading

division of Polypipe Limited. Company registration number 1099323, Registered office: Broomhouse Lane, Edlington, Doncaster DN12 1ES, United Kingdom.

1.1.2 “Customer” means the person with whom the Company contracts for the supply of Productpursuant to these conditions;

1.1.3 “Order” means any order submitted to the Company by a Customer;1.1.4 “Order Confirmation” means any order confirmation submitted to the Customer

by the Company;1.1.5 “Product(s)” means the goods and/or services to be supplied by the Company as referred to and

described in an Order which is accepted by the Company;1.1.6 “Quotation” means the quotation submitted to the Customer by the Company prior to submission

of an Order which details the prices at which the Customer may make an offer to purchase theProducts;

1.1.7 “Writing” includes telex, cable, facsimile transmission, electronic data transfer and comparablemeans of communication.

1.2 A contract shall come into force between the Parties each time an Order is accepted by theCompany, whether by issuing an Order Confirmation, by delivery, or otherwise, but not before.Subject to clause 1.3, (i) the terms of each contract shall be as set out in these conditions and theterms of any Order accepted by the Company, and (ii) in the event of any conflict between theseconditions and any such Order, the terms of the Order shall prevail.

1.3 Save to the extent contemplated at clause 2.1, the parties agree that any terms and conditionssubmitted at any time by the Customer which have not been written specifically for the purposes ofthe Product requirement to which a specific Order relates (including, without limitation, any standardterms and conditions of purchase which are printed on any order documentation submitted by theCustomer), shall not apply to any contractual dealings between the parties and shall not be deemedto constitute a counter-offer to purchase Products in accordance with those terms unless a specificintention is expressed for such terms and conditions to apply in respect of a specific Ordernotwithstanding this clause 1.3, and any failure by the Company to challenge or respond to anysuch terms and conditions does not imply and shall not constitute acceptance of those terms andconditions.

1.4 Unless otherwise stated therein Quotations shall be valid for a maximum period of 30 days fromissue and may be withdrawn at any time by written or oral notice.

1.5 Any statement or representation (other than in the Company’s Quotation or these terms andconditions) by the Company its servants or agents upon which the Customer wishes to rely must beset out in Writing and attached to or endorsed on the Customer’s Order and in any such case theCompany may confirm, reject or clarify the point and submit a new Quotation. Any statement orrepresentation which is not so confirmed in Writing is followed or acted upon entirely at theCustomer’s own risk, and shall not form any part of the contract between the parties, and shall bedeemed not to have influenced the Customer in deciding whether to enter into the contract.

1.6 The contract is between the Company and the Customer as principals; neither the benefit nor theburden is assignable by the Customer without the Company’s written consent; the contract may beassigned or subcontracted by the Company.

1.7 Unless specifically agreed to the contrary all trade terms shall be interpreted in accordance with current INCOTERMS.

1.8 If, subsequent to any contract of sale which is subject to these conditions, a contract of sale is made with the same Customer without reference to any conditions of sale orpurchase, such contract howsoever made shall be deemed to be subject to these conditions or (ifdifferent) the standard Conditions of Sale of the Company current at the time when such contractof sale is made.

2 ELECTRONIC TRADING2.1 If the Company and Customer agree that electronic trading between them shall be a basis for order

processing and invoicing then these terms and conditions shall apply subject to any special termsand conditions terms which are specific to electronic trading and which have been agreed by theparties in writing.

2.2 Electronic orders shall be valid if all the information agreed between the Customer and theCompany as being required is properly set out in the agreed format and the order is transmitted bythe Customer to the Company by reference to the correct identification code and is received by theCompany when collecting its electronic mail from the relevant system.

3 DELIVERY3.1 Unless otherwise agreed in Writing by the Company delivery shall be deemed to take place in the

case of ex-works sales when the Products are made available by the Company for collection by theCustomeror its carrier and in all other cases upon delivery by the Company to the agreed mainland UK deliverypoint airport or port but before the Products are unloaded, which shall be the responsibility of theCustomer.

3.2 The Company shall not be obliged to make delivery unless and until the Company has received allnecessary information, drawings, final instructions and approvals from the Customer and theCustomer acknowledges that any delays or alterations by the Customer may result in delayeddelivery for which the Company shall not be responsible.

3.3 All dates and periods for delivery are estimated and do not constitute fixed times for delivery by theCompany. Unless such a right or rights are expressly agreed in Writing by the Company, theCustomer shall have no right to damages or to cancel the contract for failure arising from any causeto meet any delivery times given in the contract or subsequently set.

3.4 Notwithstanding clause 3.3 the Customer shall be obliged to accept delivery on the date or withinthe period stated in the Quotation or (if none is so stated) no later than one month after the issue ornotice in Writing by the Company requiring the Customer to accept delivery. Failure by theCustomer either to take delivery or to make payment in respect of any one or more installments ofProducts shall entitle the Company to terminate the Contract (such right is without prejudice to anyother rights and remedies available to the Company whether expressly provided for in theseConditions or implied by any rule of law).

3.5 Where the Customer requests and the Company agrees to postpone delivery or where delivery isotherwise postponed or delayed without default by the Company, the Customer shall pay uponreceipt of written demand from the Company all costs and expenses including a reasonable chargefor storage and transportation occasioned thereby and the Customer shall pay for the Products inaccordance with these conditions as if the same had been delivered in the ordinary course withoutreference to the postponement or delay. In addition, the Company shall be entitled to claim interestpursuant to Clause 7.3.2 of these Conditions from the date on which payment would have fallendue, had the Products been delivered in the ordinary course but for the postponement or delay.

3.6 Unless otherwise expressly agreed in Writing the Company may effect delivery in one or moreinstallments. Where delivery is effected by installments each installment shall be treated as a separatecontract governed by these conditions. No delay in the delivery of any installment of Products or anydefect therein shall entitle the Customer to terminate the remainder of the contract.

4 RISK AND TITLE4.1 Risk of damage to or loss of the Products shall pass to the Customer upon delivery and the

Customer is then solely responsible for all loss damage or deterioration to the Products.4.2 Title to the Products shall not pass to the Customer until either:-4.2.1 The Company has received in cash or cleared funds all monies payable (whether or not due) to the

Company under this and any other contracts whenever made between the Company and theCustomer including contracts made after this contract; or

4.2.2 When the Company serves on the Customer notice in Writing specifying that title in the Products orany part thereof has passed.

4.3 Until title has passed to the Customer the Company may require the Customer to deliver up to theCompany all products in respect of which the Company has title and if the Customer fails to do soforthwith the Company’s officers, employees, representatives or agents shall be entitled to enterupon any premises where such Products are kept for the purposes of recovering the same.

4.4 Until title to the Products has passed to the Customer pursuant to these conditions it shall possessthe Products as fiduciary agent and bailee of the Company and shall store the Products separatelyfrom other goods not owned by the Company and shall ensure that they are fully insured on an allrisks basis and clearly identifiable as belonging to the Company and the Company shall be entitledto enter upon any premises where such Products are kept for the purpose of satisfying itself that thiscondition is being complied with by the Customer.

4.5 In the event that the Customer has any contract with any other company under the ultimate controlof the parent company that has ultimate control of the Company under which any monies areoutstanding (whether or not due) then the Customer shall not (notwithstanding that title wouldotherwise pass pursuant to Clause 4.2 above) obtain title to the Products or other goods supplied bythe Company under this or any other contracts between them until such other company hasreceived in cash or cleared funds all such monies.

5 CANCELLATION AND AMENDMENT5.1 No contract can be amended or cancelled except with the Company’s approval in Writing and

should such approval be given the Customer shall indemnify the Company against any costs, lossesor expenses resulting from any cancellation or amendment.

6 PRICES6.1 Unless otherwise agreed in Writing all prices shall be as stated in the valid Quotation

or, if no valid Quotation is in place, the Company’s prevailing standard price at the time of receipt of anOrder, and are for delivery ex works and are exclusive of VAT and any other applicable taxes, which arepayable in addition. Unless otherwise stipulated by the Company in Writing prices are payable in Sterlingor if the Sterling currency has ceased to exist when the contract is made, shall be payable in suchcurrency as replaces the Sterling currency.

6.2 The Company will use its best endeavors to ensure that all prices on display/provided to Customersare correct and up to date. However, should a Customer place an Order using an incorrect pricethen the Customer agrees that the Company may substitute the incorrect price set out in the Orderfor the correct price (whether the price specified on a valid Quotation or the Company’s prevailingstandard price, as appropriate) and charge accordingly.

6.3 The Company shall be entitled at any time by giving notice in Writing, before or after final invoicingto make a reasonable adjustment to the price in the event of any alteration in quantity, design orspecification requested by the Customer.

6.4 The Company reserves the right at any time prior to delivery by giving notice in Writing to increasethe price if there is any increase in the cost of materials, labour, transport, or utilities or if the costs ofthe Company are increased by any other factor beyond the reasonable control of the Company.

6.5 Charges made on the Company’s invoice for cases will be credited on their return tothe Company’s premises carriage paid and in good reusable condition. Cases shown as returnablebut not charged on the Company’s invoice must be returned to the Company’s premises carriagepaid and in good re-usable condition otherwise an additional charge will be made in respect of theircost.

6.6 The Customer shall be liable to the Company for any demurrage costs incurred in the event ofvehicles being unduly delayed at the point of delivery.

7 TERMS OF PAYMENT7.1 Unless otherwise agreed by the Company in Writing, the Customer shall make payment by the last

day of the month following the month of invoice and the Company shall be entitled to issue invoicesin the month in which the Products are delivered or would have been delivered, save forpostponement or delay otherwise than due to default on the part of the Company. Time forpayment of the price is of the essence of the contract.

7.2 No disputes arising under this contract shall serve to permit payment by the Customer of sums dueto the Company to be delayed nor shall disputes interfere with prompt payment in full. The Buyershall not be entitled to make any deduction from or set off against any sums owing to the Companyby reason of any such dispute or at all.

7.3 In the event of default in payment by the Customer the Company shall be entitled, withoutprejudice to any other right or remedy:

7.3.1 to suspend without notice all further deliveries on this or any other contract between the Companyand the Customer;

7.3.2 to charge interest on a daily basis (after as well as before judgement) on any amount outstanding atthe rate of 4% above the Base Rate of Lloyds Bank plc from time to time: and/or

7.3.3 to serve notice on the Customer requiring immediate payment for all goods supplied by thecompany under this and all other contracts between them whether or not payment is otherwise dueor invoiced.

8 SPECIFICATIONS8.1 Subject to Clause 8.2 the Products shall in all material respects be of such specification agreed

between the Company and the Customer under the contract, or (if not so agreed) shall be generallyin all materials respects in accordance with any published specification issued by the Company.

8.2 The Company reserves the right to make changes in dimensions or other specifications of theProducts as are required to conform to applicable standards or laws or are otherwise withinreasonable limits having regard to the nature of the Products. Dimensions specified by the Companyare to be treated as approximate only unless it is specifically agreed in Writing that exactmeasurements are required.

8.3 The Customer acknowledges that it has not specified any particular use for the Products and that itis entirely its own responsibility to satisfy itself that the Product is suitable for the use which itintends.

9 LOSS SHORTAGES AND DAMAGE APPARENT ON DELIVERY INSPECTIONS9.1 The Customer shall have no claim for loss, shortages or damage on delivery which are or would be

apparent on inspection unless the Customer:9.1.1 unpacks and inspects the Products as soon as reasonably

practicable following receipt:9.1.2 notifies the Company of any loss, shortages or damage (otherwise than by a qualified signature on

the delivery note) within ten working days of receipt: and9.1.3 demonstrates to the satisfaction of the Company that such loss, shortages or damage occurred prior

to delivery.9.2 The Customer shall have no rights in respect of loss, shortages or damage unless the Company is

given a reasonable opportunity to inspect the Products and investigate any complaint before any useof or alteration to or interference with the Products.

9.3 On a valid complaint made in accordance with this Clause the Customer shall be entitled (in the caseof notified shortages) to receive within a reasonable time a delivery of Products equivalent to theshortfall and (in the case of defects) to repairs to or replacements for the affected Products or at theCompany’s option a credit for the price thereof but the Company shall have no further liabilitywhatsoever. If a complaint of loss, shortages or damage on delivery is not made to the Company inaccordance with this Clause 9 within 5 working days of the date of delivery, then the Products shallbe deemed to be delivered complete and undamaged in accordance with the contract and theCustomer shall be bound to pay for the same accordingly.

9.4 Loss, shortages or damage in a delivery or any installment delivery shall not be a ground fortermination of the contract or the remainder of the contract (as the case may be).

10 WARRANTY10.1 The Company warrants that Products which do not comply with either Clause 8.1 or Sections 13 to

15 of the Sale of Goods Act 1979 (as amended) are shown to have been defective at delivery as aresult of faulty design workmanship or materials (other than free-issue materials), shall either berepaired or replaced or that, at the Company’s option, a credit or refund for the price thereof shallbe given provided always that:

10.1.1 the Company receives written notice of the defect within 12 months of delivery;10.1.2 no alteration to or interference with the Products takes place before the Company is given access to

the Products to inspect and test the same;10.1.3 the defect does not consist of a loss shortage or damage to which Clause 9 is expressed to apply;10.1.4 the defect does not arise by reason of a design specification or instruction given by the Customer;10.1.5 the Customer has not defaulted in its obligation to make payment of the contract price for the

Products;10.1.6 the defect shall not be attributable to incorrect storage or use of the Products by the Customer.10.2 The benefit of Clause 10.1 shall only extend to Products or parts not manufactured by the Company

to the extent that the Company has equivalent recourse against the manufacturer or supplierthereof.

10.3 The Customer shall indemnify the Company in respect of loss or damage arising from any use madeof Products after the Customer became or ought reasonably to have been aware of a defect.

10.4 In the event of a valid claim being made in accordance with Clause 10.1:10.4.1 the Customer shall be bound to accept repaired or replacement Products or at the Company’s

option credit or repayment and shall not be entitled to terminate the contract;10.4.2 if the Company does not repair or replace Products within 60 days or such longer time as may be

reasonable then the Customer’s sole remedy shall be an entitlement to full credit or repayment inrespect of the defective Products; and the Company shall be under no further liability in respect ofany loss or damage arising from the defect or from any delay before repair replacement credit orrefund is effected.

11 LIABILITY11.1 The Company does not exclude liability arising under Section 12 of the Sale of Goods Act 1979

(good title) (as amended) or for death or personal injury caused by its negligence as defined in theUnfair Contract Terms Act 1977, fraudulent misrepresentation or any other type of liability whichcannot by law be excluded or limited

11.2 Save as provided under Clauses 9, 10 and 11.1 the Company shall have no liability to the Customerin connection with or arising from any defect or failure in the Products or otherwise due to thequality, condition, suitability, durability, safety or any other aspect or feature of the Products. TheCompany’s liability, whether in respect of one claim or in the aggregate, shall not exceed thecontract price payable under this contract for the supply of Products to be provided under it. Theprice of the Products is predicated on the basis of the limitations and exclusions set out in theseconditions. The Customer acknowledges that without those exclusions and limitations, the price ofthe Products would be higher and that the limitation of the Company’s liability is thereforereasonable in all the circumstances. The Customer agrees that it is its own responsibility to insureadequately to cover any loss or damage in excess of the aforesaid limit of the Company’s liability.Subject to reaching agreement on terms, the Company and the Customer may determine anincreased level of liability which is to be accepted in Writing by the Company to cover, in particularspecific types of loss or damage which both parties reasonably foresee and anticipate.

11.3 In Clause 11.2 the term “liability” means any form of liability whatsoever including but not limited toliability in misrepresentation and under contract, common law, equity and any statutory provisionwhether or not based on negligence or breach of any express or implied duty to act with care orskill.

11.4 Notwithstanding any other provisions of these conditions the Customer shall have no claim againstthe Company in respect of any loss other than strictly direct losses (meaning for these purposes theincreased costs of purchasing products from a third party or the cost of remedial repair work) andspecifically consequential, financial economic loss whether direct or indirect including but not limitedto any incidental costs of dismantling fitting or other ancillary work required in connection with theprovision of a repair or replacement, any loss or production profits contracts loss of use oranticipated savings and any claims made against the Customer by any third party are excluded evenif reasonably foreseeable.

11.5 To the extent that any liability of the Company is expressed to be limited or excluded by theseconditions the Customer shall indemnify the Company in respect thereof.

12 CONFIDENTIAL INFORMATION ETC12.1 All drawings, documents, records, computer software and other information supplied by the

Company are supplied on the express understanding that all intellectual property rights therein isreserved to the Company and that the Customer will not without written consent of the Companyeither give away, loan, exhibit, or sell the same or extracts therefrom or copies thereof or use thesame in any way except in connection with the Products in respect of which they are issued.

13 PATENT INDEMNITIES13.1 If the Customer is subject to a claim or threatened with any action alleging that the Products in the

form supplied infringe any patent, copyright, design right or other intellectual property right thenprovided that the Customer promptly informs and fully co-operates with the Company and ifrequested allows the Company the conduct and defence thereof on the Customer’s behalf, theCompany will indemnify the Customer against any award or damages for infringement made in anysuch action by a court or other competent body against the Customer. Further, if the Products areinfringing the Customer agrees that the company shall have the option at its own expense either tomodify the Products so that they do not infringe: to replace the Products with a non infringingsubstitute: to procure for the Customer the right for the Customer to continue its use of theProducts: or to repurchase the Products from the Customer at the price paid by the Customer lessan allowance for the use made thereof.

13.2 The Company shall have no liability in respect of claims for infringement or alleged infringement ofthird parties patent or other intellectual property rights arising from the manufacture or supply of theProducts to the Customer’s instructions or in accordance with designs plans or specifications givenby the Customer and the Customer shall indemnify the Company against all losses damagesexpenses costs or other liability arising from such claims.

14 CUSTOMER’S DRAWINGS14.1 The Customer shall be solely responsible for ensuring that all drawings information advice and

recommendations specified or given to the Company by the Customer or its agents, servantsconsultants or advisers are accurate correct and suitable Examination or consideration by theCompany of such drawings information advice or recommendations shall not result in any liability onthe part of the Company.

15 COMPANY LITERATURE15.1 The information contained in the advertising, sales, technical, and other literature issued by the

Company may be relied upon to be accurate in the exact circumstances in which it is expressedotherwise any illustrations performance details examples of installations and methods of assemblyand all other information and data in such literature are based on experience and upon trials undertest conditions and are provided for general guidance only. No such information or data shall formpart of the contract unless it is specifically referred to in the Quotation.

16 TERMINATION16.1 Without prejudice to any other rights or remedies of the Company it shall be entitled in any of the

following circumstances to terminate (in whole or in part) this and any other contract whenevermade between the Company and the Customer and/or to suspend deliveries and/or to receive upondemand payment of all monies payable under any such contracts whether or not otherwise due:

16.1.1 the Customer made or proposes any voluntary arrangement with its creditors or becomes subject toan administration order or becomes bankrupt or goes into liquidation;

16.1.2 an encumbrancer takes possession or a receiver is appointed of any of the propertyor assets of the Customer;

16.1.3 the Customer becomes unable to satisfy its debts as they fall due or cease, or threatens to cease tocarry on business;

16.1.4 the Company reasonably believes that any of the events mentioned above or any equivalent orsimilar event under any relevant laws to which the Customer or any connected person is subject hasor may occur;

16.1.5 the Customer or any connected person commits any breach of this or any either contract whenevermade between the Customer and the Company.

17 FORCE MAJEURE17.1 The Company shall be excused performance of its obligations whilst and if affected by act of God

governmental restriction condition or control, any act done or not done pursuant to a trade disputewhether such dispute involves its employees or not, default by suppliers of the Company, shortageof materials or by any other act matter or thing beyond its reasonable control including failure by theother party to carry out anything required for performance of the contract.

17.2 In the event that the Company does not perform its obligations by reason of any ofthe causes referred to in Clause 17.1 within six months after the time for performance then theCompany or the Customer may by written notice terminate the contract without liability save thatthe Customer shall pay for any Products delivered or completed at the time of termination.

18 TOOLS18.1 Any tools (such as jigs, dies, etc) which the Company may construct or acquire specifically in

connection with the Products shall, notwithstanding any charges the Company may make for them,be and remain the Company’s sole and unencumbered property and in the Company’s possessionand control without restriction.

19 FREE-ISSUE MATERIALS19.1 Free-issue material shall be insured by and remain at the risk of the Customer at all times and the

Company shall be indemnified by the Customer against any loss, damage, injury or expensewhatsoever arising directly or indirectly therefrom and the company shall not be liable for loss of ordamage to any such materials during fabrication by the Company or sub-contractor employed byCompany or whilst on the premises of the Company or of any such subcontractor or in transit to orfrom the premises of the Company or of any such sub-contractor provided that the Company mayat its sole discretion make a contribution towards the replacement costs of such materials.

19.2 An allowance for material lost as process scrap is (where applicable) included in the contract priceand no such losses shall be the subject of any claim by the Customer or contribution by theCompany.

19.3 Where materials are supplied by or on behalf of the Company the Customer shall be responsible toensure that the material is of satisfactory quality and is fit for its purpose and shall indemnify beCompany against any loss damage, injury or expenses whatsoever arising directly or indirectly fromany fault in or incorrect specification of the said materials.

20 CONSUMER PROTECTION ACT 198720.1 Where the Customer purchases the Products for use or incorporation with any other products to be

assembled, produced, processed packed or supplied by the Customer or for resale or supply ancillaryto any such other products or other products supplied by the Customer then:

20.1.1 the Customer shall forthwith on demand produce for inspection by the Company copies of allwritten instructions information and warnings to be supplied by the Customer in relation theretoprovided nevertheless that such inspection or right to inspect shall not give rise to any responsibilityor liability on the part of the Company; and

20.1.2 the Customer shall indemnify the Company against any losses, costs and damages that theCompany may suffer or incur in the event any claim is made against the Company in relationthereto if the Products did not comprise the detective element thereof or were rendered defective byreason of actions or omissions of the Customer (including without limitation the supply of defectivefree-issue materials) or were rendered defective by reason of instructions or warnings given oromitted by the Customer or other reseller.

20.2 For the purpose of Clause 20.1 the term “defective” shall be interpreted in accordance with thedefinition contained in Part 1 of the Consumer Protection Act 1987.

21 HEALTH & SAFETY21.1 The Customer agrees to pay due regard to any information supplied by the Company relating to the

use for which the Products are designed or have been tested or concerning conditions necessary toensure that they will be safe and without risk to health at all times when they are being set, used,cleaned, serviced or maintained by any person and the Customer undertakes to take such steps asmay be specified by such information or otherwise necessary to ensure that as far as is reasonablypracticable the Products will be safe and without risk to health at all times as mentioned above.

22 LAW AND JURISDICTION ETC22.1 The Contract shall be governed and interpreted exclusively according to the Laws of England.

The parties hereby agree to submit to the exclusive jurisdiction of the English courts provided thatthe Company may at its option take proceedings in the courts of the state in which the Customer isdomiciled including action to obtain any remedy (including injunctive relief). In the case of any orderfor the export of Products, the Schedule to the Uniform Law on International Sales Act 1967 shallnot in any circumstances apply to the Contract and neither shall the limits imposed by the UnfairContract Terms Act 1977 on the extent to which liability can be excluded or limited.

22.2 No waiver of or delay or failure by the Company to exercise any rights or remedies shall prejudice orpreclude any future or further exercise thereof.

22.3 If any provision of these conditions shall be held invalid or unenforcable in whole or in part then theunaffected provisions shall remain in full force and effect. Headings appear for convenience only andshall not affect the Construction of these conditions.

22.4 If the Contract provides for the supply of services and no general conditions of the Companyrelating specifically to the supply of services are made applicable to such services then theseconditions shall mutatis mutandis apply to such services as they would apply to Products and in suchevent Clause 10.1 will be deemed to include a reference to Sections 3 to 5 of the Supply of Goodsand Services Act 1982 (as amended), either in addition to or in place of the reference to Sections 13to 15 of the Sale of Goods Act 1979 (as amended) as may be appropriate. For the avoidance ofdoubt the following provisions apply where the Company supplies services to the Customer inaccordance with clause 22.4:-

22.4.1 the Company’s obligation to provide the services is in any event conditional upon payment of theagreed price for the services. Any default or delay in payment according to the terms agreedbetween the Company and the Customer shall entitle the Company at its option to decline toperform or decline to continue to perform its obligations hereunder but without thereby incurringany liability to the Customer.

22.4.2 Save to the extent that by reason of negligence on the part of the Company in the performance ofthe services which results in death or personal injury (which the Company does not limit or exclude),the Company’s liability under the contract shall be limited to the amount of charges paid to theCompany in return for the services and in particular the Company accepts responsibility only fordirect and unavoidable loss or damage arising from any negligence in the provision of services and inparticular all other types of loss whether economic, financial, indirect or consequential and whetherreasonably foreseeable or not are excluded to the fullest extent permitted by law.

22.4.3 The Customer shall lend all such reasonable assistance to the Company in the performance of theservices as the Company shall reasonably require.

22.4.4 The Customer shall indemnify and keep the Company, its employees, agents and contractorsindemnified at all times from and against any loss or damage and injury caused to persons orproperty in the course of the provision of the services where such loss or damage arises by reason ofthe Customer’s negligence or negligence of persons under the control of the Customer.

22.4.5 The Customer acknowledges and agrees that if due to the act or omission of the Customer, theCompany is not able, having attended at the Customer’s premises to perform the services, theCompany shall be entitled to claim reasonable additional costs and expenses from the Customeroccasioned by any resulting delay in the provisions of the services.

22.5 In cases for the sale or supply of Products overseas, the following additional provisions shall applyunless otherwise stipulated in writing by the Company:

22.5.1 the Customer shall be solely responsible for obtaining all necessary import authorisations, thepayment of any applicable import taxes, duties or imposts and the Company shall be under noobligation to give the Customer the notice specified in Section 32(3) of the Sale of Goods Act 1979(or any re-enactment thereof);

22.5.2 Quotations issued in a currency other than Sterling may at the Company’s option, unless otherwiseagreed in writing, be subject to amendment in the event of fluctuations in the applicable exchangerate prior to the date of invoice;

22.5.3 payment in respect of Products for export is due on the date specified by the Company at the datewhen the Contract is made, in the currency stated in the invoice and in accordance with the methodof payment stipulated by the Company. All costs incurred by the Company in connection with thedesignated particular method of payment shall be met by the customer.

23 DISTANCE SELLING REGULATIONSIf you are a consumer within the meaning of the Distance Selling Regulations 2000and you have bought the products detailed overleaf over telephone, internet or via mail order thenwithin seven days of receipt of you products you have the right to cancel your order and return theProducts for a full refund.

June 2009

47

Date post:	28-Jul-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Trade Price List - Hawk Heating Supplies · INTRODUCTION 02 For further information log onto...

Documents