Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Training Objectives
After learning this course, you will be able to:
Know about functions related to the Summary data file.
Know about the method for filling in the Summary data file.
Use the Summary data file to deploy eNodeBs on the CME.
Use the customization tools provided in the Summary data file to
customize a data file.
Use the Summary data file to collect the low-level design (LLD) data.
Use the data export function provided in the Summary data file to
modify data and deploy eNodeBs.
www.huawei.com
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
英文标题 :40-47pt
副标题 :26-30pt
字体颜色 : 反白内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :35-47pt
字体 : 黑体 副标题 :24-28pt
字体颜色 : 反白字体 : 细黑体
Security Level: Internal Only
Wireless Product Rollout Dept.——WiTL Team
M2000-CME V200R011C01Introduction to LTE Summary Data File
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Contents
Summary Solution
Background of the Summary Data File
Introduction to the Summary Data File
eNodeB Deployment by Using the
Summary Data File in Different Scenarios (Security/Non-Security/TDD/MOCN)
Customization Tools Provided in the Summary Data File
Example of Using the Summary Data File
Solution Integrating the LLD and the Summary Data Files
Data Modification and eNodeB Deployment by Using the Data Export Function Provided in the Summary Data File
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Background of the Summary Data File
eNodeB Deployment by Using an eNodeB Data Export Template eNodeB Deployment by Using the Summary Data File
Expansion
Changing an eNodeB data export template involves changing the mapping relationship between the eNodeB data export template and the CME version. As a result, the changes can be incorporated only in the later mapping version or a new patch.
Customization tools are provided in the Summary data file so that GTS engineers can customize a Summary data file according to the actual situation of an eNodeB.
Involved files
Three files are involved: LLD data fileSummary data fileeNodeB data export template
Only the Summary data file is involved during the eNodeB deployment.
Data conversion
Two mapping processes are involved: LLD data file > Summary data fileSummary data file > eNodeB data export templateIn addition, mapping relationships of the three files need to be maintained manually.
The mapping s relationships are automatically maintained by a tool. In addition, the Summary data file provides the macro function so that the LLD data file and the Summary data file can be automatically converted.
Data fillingAll data, except for common data, is filled in List mode. In this case, GTS engineers need to fill in a lot of data.
Data can be filled in Pattern, List, or Common mode. As a result, the workload of filling in data by GTS engineers is decreased.
When deploying LTE eNodeBs by using an eNodeB data export template, GTS engineers have to spend a lot of time in
the connection sections for preparing data used for eNodeB deployment, instead of data configuration and eNodeB
deployment due to the following reasons:
The expansion is poor.
There are a lot of data files, mapping relationships of which need to be maintained manually.
Two mapping processes are involved.
All data, except for common data, is filled in List mode.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Contents
Introduction to the Summary Data File Concept of the Summary Data File
Structure of the Summary Data File
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Contents
Introduction to the Summary Data File Concept of the Summary Data File
Reference
Pattern
List
Comparison Between Pattern and List
Structure of the Summary Data File
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Customize a Summary data file
and set LLD parameters.
Operators fill in the LLD data file.
Switch to the Summary data file.
Switch to the LLD data file.
Whether operators are
involved?Yes
GTS engineers fill in eNodeB deployment
data.
No
Import eNodeB deployment data to the CME to deploy
eNodeBs in batches.
Export eNodeB deployment data
after the data check is successful.
Commission an eNodeB.
End
Create eNodeB in GUI
Modify eNodeB Configration Data
Save As eNodeB Template
Page8
eNodeB Deployment Process Using the Solution Integrating the LLD and the Summary Data File
Switch between the LLD data file and the Summary data file
1
3
Customize Summary Data File using the Summary data file
4
eNodeB Deployment Using Summary Data File
Create eNodeB Template
2
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page9
Build eNodeB Data
Summary table(excel file)
Summary table(excel file)
Default or customizedeNodeB Template
Default or customizedeNodeB Template
associated( necessary)
RadioTemplate
RadioTemplate
associated( optional )
Cell Template
Cell Template
Associated( optional )
build
eNodeB data (xml)
eNodeB data (xml)
Build eNodeB Data
When summary being imported into CME, CME will use the correct template build eNodeB data:
Data priority : Summary data has the highest priority, Radio and cell has lower priority, and eNodeB has the lowest priority.:
Summary data> template data;
Cell template>eNodeB template
Radio template>eNodeB
template
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — Reference 1
The Pattern-type sheets support the reference of parameters on the Common Data and eNodeB Transport Data sheets.
The format of parameter reference is as follows: sheet name\name of the MOC group\parameter name [n]In this format, [n] indicates the sequence number of the record. The sequence number of records begins from 0. Currently, cases are distinguished by adding the sequence number to the case name in the Common Data sheet.
Reference
Reference of parameters in the Common Data sheet:
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — Reference 2
Reference of parameters or new parameter values
Reference
Reference of parameters in the eNodeB Transport Data sheet:
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — Pattern
Two features:1. The quantity of data configured for each eNodeB is the same in the Summary
data file.2. Parameter values of eNodeBs are the same or parameter reference sources
are the same.
Feature 2: Parameter reference sources are the same.
Feature 2: Parameter values are the same.
Feature 1: Each eNodeB has five pieces of DevIP data.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — List
1
2
Data of different NEs is distinguished by eNodeB name.
Data in the eNodeB Transport Data sheet is redundant when the number of NEs and the number of parameters are large. To prevent the data from becoming redundant, you can list some parameters of NEs in an independent sheet.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — Comparison Between Pattern and List (1)
DevIPeNodeB Name CabinetNo SubrackNo *SlotNo *SubboardType *PortType *PortNo *IP *Mask
eNodeB0 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.1 255.255.255.255eNodeB0 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.2 255.255.255.255eNodeB0 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.3 255.255.255.255eNodeB0 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.4 255.255.255.255eNodeB0 0 0 7 BASE_BOARD ETH 0 10.141.142.5 255.255.255.255eNodeB0 0 0 7 BASE_BOARD ETH 0 10.141.142.6 255.255.255.255eNodeB1 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.7 255.255.255.255eNodeB1 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.8 255.255.255.255eNodeB1 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.9 255.255.255.255eNodeB1 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.10 255.255.255.255eNodeB1 0 0 7 BASE_BOARD ETH 0 10.141.142.11 255.255.255.255eNodeB1 0 0 7 BASE_BOARD ETH 0 10.141.142.12 255.255.255.255eNodeB2 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.13 255.255.255.255eNodeB2 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.14 255.255.255.255eNodeB2 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.15 255.255.255.255eNodeB2 0 0 7 BASE_BOARD LOOPINT 0 10.141.142.16 255.255.255.255eNodeB2 0 0 7 BASE_BOARD ETH 0 10.141.142.17 255.255.255.255eNodeB2 0 0 7 BASE_BOARD ETH 0 10.141.142.18 255.255.255.255
List:
Pattern:
The workload of filling in data in List mode is twice compared with that in Pattern mode.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — Comparison Between Pattern and List (2)
Pattern:
In the case that the same data source is referred by different Pattern-type sheets, you can only change the data in the data source instead of updating the reference when the data is changed.
eNodeB Data BFD*eNodeB Name BFD SourceIP BFD Mask BFD DstIP
eNodeB0 10.2.96.122 255.255.255.248 10.2.96.121eNodeB1 10.2.96.90 255.255.255.248 10.2.96.89
Reference 2Reference 1
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Contents
Introduction to the Summary Data File Concept to the Summary Data File Structure of the Summary Data File
Common Data eNodeB Transport Data eNodeB Radio Data Pattern-Type Sheet List-Type Sheet Other: Cover, Help, USB Parameter for Site
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — Common Data
The Common Data sheet has the following features:1. The data needs to be negotiated with customers.2. The data refers to the common planning data of eNodeBs in the Summary data file.3. When deploying eNodeBs in batches, the data is applicable to all eNodeBs in the Summary
data file.
This sheet cannot be deleted but the parameter description information can be modified.
Separating different MOC information groups by a blank row
One MOC group can correspond to only one configuration object.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — eNodeB Transport Data
Items in the table head show the basic eNodeB deployment information and cannot be changed.
eNodeB parameters and parameters related to transmission planning are defined. Then, other parameters about eNodeBs are specified by correlating to the eNodeB template.
This sheet cannot be deleted. Items in the table heading, except for the marked ones, can be changed.
The customized template can be added or deleted by using the macro function provided in the Summary data file.
1
2
Site template
5
Radio template
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — eNodeB Radio Data
12
Distinguish eNodeBs of different cells.
List parameters related to sectors and RET objects.
3
Cell template
The eNodeB Radio Data sheet has the following features: 1. Planning parameters of cells and sectors are defined.2. This sheet cannot be deleted but contents in this sheet can be changed.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — Pattern-Type Sheet Currently, the default Pattern-type sheets are the OMChPattern, DevIPPattern, and IPRoutePattern sheets. The three sheets must be filled. Other Pattern-type sheets can be customized based on networking and planning of each site.
Reference
The eNodeB Transport Data sheet provides the route information of ten groups by default. You can customize the parameters related to routes, such as IP address, Mask, NextHopIP by referring to parameters in the IPRoutePattern sheet.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page 21
Summary Data File — List-Type Sheet
You can refer to the contents in the "Summary Data File — List" page.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — Other Sheets
Cover•Version number of the eNodeB•Precautions for filling in the Summary data file•Descriptions of each sheet in the Summary data file•Change history of the Summary data file
Help•Help for the Summary data file
USB Parameter for Sites•USB parameters for site deployment
Help for USB Parameter•Help for filling in USB parameters for site deployment
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Summary Data File — Selection of Data Filling Format
1. Which data is filled in Common-type sheets? You need to negotiate the data with customers. The parameter values are fixed and do not vary with eNodeBs.
2. Which data is filled in the eNodeB Transport Data sheet? You need to negotiate the data with customers. The parameter values vary with eNodeBs. You need to fill in the eNodeB Transport Data sheet with the data related to eNodeBs and transport-related data (and some data related
to the IP address).
3. Which data is filled in Pattern-type sheets? In the Summary data file, the number of data configured for eNodeBs is the same. In addition, parameter values are the same and the
parameter reference sources are the same. The Omch, DevIp, and IpRoute sheets are in Pattern-type sheets by default. This solves the rule-check problem after eNodeBs are
deployed by using the Summary data file. You are advised not to delete the three sheets.
4. Which data is filled in the customized template? You do not need to negotiate the data with customers. Configuration data of each eNodeB is the same. You are advised to fill in the
customized template with parameters such as hardware parameters and radio algorithm parameters.
5. What is the difference between the data in the customized templates and the data in the Common-type sheets? The data in the Common-type sheets can be saved in the customized templates after negotiation. The data in the customized
templates, however, must be subject to the Summary data file.
6. Which data is filled in List-type Sheets? The data is filled in List-type sheets when the data cannot be filled in the Common-type sheets, Pattern-type sheets, or customized
templates.
7. Why is not method for filling in List-type data in the eNodeB Transport Data sheet not recommended? The List-type data can be filled in the eNodeB Transport Data sheet. This data filling method, however, is not recommended. This is
because the data in the eNodeB Transport Data sheet may be redundant and the Summary data file may be changed multiple times due to the large amount of data.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Contents
eNodeB Deployment by Using the Summary Data File in
Different Scenarios (Security/Non-Security/TDD/MOCN) Overview
eNodeB Deployment by Using the Summary Data File in Non-Security Scenario
eNodeB Deployment by Using the Summary Data File in Security Scenario
eNodeB Deployment by Using the Summary Data File in TDD Scenario
eNodeB Deployment by Using the Summary Data File and Template Selection in
MOCN Scenario
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Overview
The processes for eNodeB deployment in scenarios such as non-security, security, TDD, and MOCN scenarios are the same. However, data filled in the Summary data file are different.
The differences of filling in the Summary data file are compared based on the eNodeB deployment in non-security FDD scenario.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
eNodeB Deployment by Using the Summary Data File in Non-Security Scenario
You need to fill in the necessary information, such as eNodeB, operator, clock, time zone, OMCh channel, route, and core network.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
eNodeB Deployment by Using the Summary Data File in Security Scenario
Compared to the non-security scenario, objects related to the security scenario are as follows:
In the Common Data sheet: IPSECPROPOSAL, IKEPEER, IPSECPOLICY, IKECFG, IPSECBIND,
PACKETFILTER, ACL, ACLRULE, and security certificate
In the eNodeB Transport Data sheet: physical IP address and PreShareKey of IKEPeer
In the ACLPattern sheet: All parameters in the ACLPattern sheet
You can directly select the security template that is released by default. Or, you can add a security scenario by
using the customization tools provided in the Summary data file.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
eNodeB Deployment by Using the Summary Data File in TDD Scenario
TDD and FDD scenarios: The main differences lie in the parameter values in the
customized template or Summary data file, and parameters in cell sheets.
The differences in filling in the Summary data file are as follows:
In the eNodeB Transport Data sheet: FDD/TDD Mode and Site Template.
In the eNodeB Radio Data sheet: FddTddInd and ARFCN
Differences in FDD and TDD scenarios
Differences in FDD and TDD scenarios
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
eNodeB Deployment by Using the Summary Data File in MOCN Scenario
The differences in filling in the Summary data file in MOCN and single-
operator scenarios are as follows:
1. The following parameters are added in the Common sheet:
eNodeB Info: Add MCC and MNC of an eNodeB
ENodeBSharingMode: Select eNodeB Sharing Mode.
LicenseSharingPolicy: Select License-Sharing Policy of an eNodeB.
2. The CellOp and CnOperatorTa sheets are changed from radio sheets to
List-type sheets.
3. RAN Sharing Mode Switch of CellAlgSwitch is added in the Radio sheet:
RAN-sharing mode switch
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
eNodeB Deployment by Using the Summary Data File in MOCN Scenario —Data File Selection
Data file selection in Endpoint and Link mode:
1. The EndPoint mode is recommended. That is, the values of IPPath and SctpLink, and
interface configuration are automatically generated after you fill in MME, SGW,
S1SigIP, S1ServerIP, X2SigIP, and X2ServerIP.
2. Currently, the EndPoint mode supports the scenario of one S1SigIP and S1SigIP port.
3. If more than one S1SigIP or S1SigIP port are configured at the site, you are advised to
deploy the eNodeB in Link mode. That is, the values of IPPath and SctpLink, and
interface configuration are manually configured.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Contents
Customization Tools Provided in the Summary Data File
Introduction Function Introduction Scenario-Based Summary Data File
Introduction Background Supported Scenarios
Example
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Customization Tools Provided in the Summary Data File
On the CME, customization tools are provided in the Summary data file so that contents in the Summary data file can be modified and maintained.
User model NE model
Summary data file
Right table of customization tools
MappingMapping
Conversion
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Customization Tools Provided in the Summary Data File — Function Introduction
Open a template
Check a template Search
from the right table
Add a sheet
Add a scenario-based Summary data file
Generate the mapping directly from the left
navigation tree
Search for the NE on the left navigation tree from the right table
Add a row
Delete a row
Set the LLD
Modify Summary Data Group Name
The Summary data file supports the following functions:Open/close/save the data fileAdd scenario-based data fileCheck the validity of the data fileAdd a sheetQuery informationThe left navigation tree supports the following functions:SearchSequenceDisplay/close the left navigation treeThe sheet supports the following functions:Adding/changing mapping on the left navigation treeAdding/deleting a blank rowSequenceFilterSearch for NEs on the left navigation tree from the right tableSet the LLD/referenceDefine the data in the Pattern-type sheet
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Customization Tools Provided in the Summary Data File — Scenario-Based Background
The CME provides the functions of customizing the scenario-based Summary data file to simplify the procedure for customizing the scenario-based Summary data file and reducing the difficulties.
Customizing the scenario-based Summary data file refers to defining some typical scenarios by NE feature. The CME provides a window for selecting different scenarios. Based on the selected scenario, the CME adds the objects and parameters to the existing Summary data file so that the Summary data file for typical scenarios can be quickly customized.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Customization Tools Provided in the Summary Data File — Scenario-Based Type
Based on usage of onsite features and network reconstruction requirements, the CME provides three types of scenarios: VLANSecurityQoS
Based on different usage methods, the three types of scenarios can be further divided into eight sub-scenarios:VLANGROUPSINGLEVLANSINGLEVLAN_AND_VLANGROUPIPsecAuthMethByPSKIPsecAuthMethByPSK_AND_PacketFilterIPsecAuthMethByRSASIG_AND_PKI_CMPv2IPsecAuthMethByRSASIG_AND_PKI_CMPv2_AND_PacketFilterOverbooking_AND_DifferentiatedTrafficFlowControl
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Customization Tools Provided in the Summary Data File — Scenario-Based ExampleAdd the VLANGROUP feature to the existing Summary data file and customize the scenario-based Summary data file containing the VLANGROUP feature.
2
1
3
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Contents
Example of Using the Summary Data File
Customizing the Summary Data File
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Example of Using the Summary Data File — Customizing a Data Collection File
The following is a typical example about how to customize the Summary data file.Case — Changing the Summary data file not supporting the security scenario to the
Summary data file supporting the security scenario• Add the ACLPattern and BFDSessionPattern sheets.• Add the SCTPLNKList sheet. This change is only used to describe how to add a List-
type sheet, which is not mandatory in security scenario.• Modify the Common Data sheet: Add parameters such as IPSECPROPOSAL,
IKEPEER, IPSECPOLICY, IKECFG, IPSECBIND, PACKETFILTER, ACL, and the security certificate.
• Add the eNodeB Transport Data sheet.• Add the OuterIP group, and add the PhysicalIP, PhysicalIP Mask, PhysicalIP
PortType, and VlanID parameters under the group.• Add the BFD group, and add the BFD SourceIP, BFD Mask, and BFD DstIP parameters
under the group.• Add the CAserver group, and add the CA server IP parameter under the group.• Add the information about a default route group. Add the IPRoute IP11, IPRoute
Mask11, IPRoute NextHopIp11, VlanID11, and VLANPri11 parameters to the existing IPRoute group. This change describes only how to add a column to the existing group.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Example of Using the Summary Data File
For the operation procedure, see the Customization Tool of a Summary Data File in CME online help hdx file ( press F1 in software)/
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Contents
Solution Integrating the LLD and the Summary Data Files
Background eNodeB Deployment Process by using the Solution Integrating the LLD and
the Summary Data Files Setting LLD Parameters by Using the Customization Tools in the Summary
Data File Converting the Summary Data File to the LLD Data File Delivery of Existing LTE 2.0 eNodeBs
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Background
LTE 2.0 has the following problems:Three data files are required:LLD data fileSummary data fileeNodeB data export template
Two mapping processes are required:LLD data file > Summary data fileSummary data file > eNodeB data export template
The process is complicated. When will the entire process ends?
LLD data file Summary data file eNodeB data export template
Mapping Mapping
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
eNodeB Deployment Process by Using the Solution Integrating the LLD and the Summary Data Files
Switch between the LLD data file and the Summary data file
1
2
Customize LLD parameters by using the Summary data file
3
These steps do not change after the LLD data file is integrated.
4
5
Switch to the LLD data file.
Switch to the Summary data file.
Customize a Summary data file
and set LLD parameters.
Operators fill in the LLD data file.
Switch to the Summary data file.
Switch to the LLD data file.
Whether operators are
involved?Yes
GTS engineers fill in eNodeB deployment
data.
否
Import eNodeB deployment data to the CME to deploy
eNodeBs in batches.
Export eNodeB deployment data
after the data check is successful.
Commission an eNodeB.
End
Automatically generated the Common Data
sheet based on settings of LLD parameters.
Automatically add the QoS information in the Common Data sheet.
Automatically process common data except for
the OoS information.
Automatically map the QoS information to
DIFPRI and VlanClass columns.
Switch to the Summary data file.
Automatically unhide sheets and parameters.
Automatically hide sheets and parameters.
Switch to the LLD data file.
Rule
Rule
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Setting LLD Parameters by Using the Customization Tools in the Summary Data File
2
1
3
The Summary data file supports the setting of LLD parameters in the Common Data, eNodeB Transport Data, eNodeB Radio Data, and List-type sheets.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
Converting the Summary Data File to the LLD Data FileThe Summary data file provides the macro function so that the LLD data file and the Summary data file can be automatically converted.
Summary data file
LLD data file
Perform the mapping based on setting of LLD parameters.
Hide redundant sheets.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
RNP
Page45
Scenario
RNP is applicable to cell expansion and neighboring cell relation
adjustment.
Manage the neighboring cell relation for ERAN in the entire
network.
Automatically create bi-directional neighboring cells. Automatically create X2 links. Automatically add external cells according to the intra-frequency n
eighboring cell and inter-frequency neighboring cell.
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
RNP
Page46
1
2
3
Export RNP Data FIle
Modify RNP Data FIle
Import RNP Data FIle
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved.
RNP
Page47
Operation procedure: Export RNP data
1
2
3
4
5
6
7
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page48
RNP
Operation procedure: Export RNP data
9
8
10
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page49
RNP
Operation procedure: Import RNP data
1
23
4
Copyright © 2010 Huawei Technologies Co., Ltd. All rights reserved. Page50
RNP
Operation procedure: Import RNP data
6
5
7
www.huawei.com
Thank you!