TRO-REEL HS/HIGH SPEED (Non-Tension Type)

！ Please follow the safety precautions on pages 2 and 3.

Indoor Use Insulated Trolleys・UL Listed UL

17

The V-shaped conductors provide a large contact surface area, ensuring a consistent power supply even at high speeds.

The conductors have a unique V shape that increases the contact area between the conductors and the collector arm.As a result, the power supply is consistent, even when the conveyors are travelling at high speeds, effectively preventing such problems as separation from wires.

An 8P installation measures only 124mm in height. Easy setup even in confined spaces.

For precision control of conveyers, use of multiple control wires is essential. With the Tro-Reel HS, even when 8P is installed, the height remains just 124mm. (Depending on the combination of components used, installations larger than 8P are also possible. For details, contact us.)

Easily adaptable to complex line configurations, such as sections with different voltages, insulated sections, turntables and traversers.

Installation of insulated sections and sections with different voltages is possible by simply inserting insulating pieces. By using a guide cap, the Tro-Reel HS can accommodate transfers between lines via turntables and traversers.

Easy installation of curved lines as tight as 800mm in radius.

Installation of curves with the Tro-Reel HS is very easy. The V-shaped conductor can be installed in curves as tight as 800mm in radius without the use of any special bending tools, so it's ideal even for complex layouts.

124A

Center feed-in joiner Guide cap

Guide cap

Guide cap(front-facing)

Guide cap(right-angled)

10～20mm

(right-angled)

(rear-facing)

500A

500 500

Over R800A

Hanger

The 3m long Tro-ReelHS units are installed

consecutively along the side of the rail.The units can manipulate motor conveyors through

complex linear routes at high speeds.

18

150130

500 26Cable AWG4 (22E)

1515

1515

1515

5.5

10 13

1515

1515 A

1515

15

Cable AWG8(8E)

TRO-REEL HS/HIGH SPEED (Non-Tension Type) Indoor Use Insulated Trolleys

90A Tro-Reel HS unit (for indoor use only) UL Listed Joiner UL Listed

●Rating ■600V, 90A●Conductor material ■Copper 28mm2

●Insulating sheath material ■Rigid PVC (heat resistance: 75°C)

Orange (hazard color), Munsell 2.5YR6/13

Ligth Blue, Munsell 5.5PB5.2/10

Used to connect the Tro-Reel HS units together. Joiners

allow for expansion and contraction of the Tro-Reel HS

units due to temperature fluctuations. Lock screw not

included.

Equipped with power supply cables. Simultaneously

supplies power and connects the Tro-Reel HS units

together. Lock screw not included.Note: Cannot be used as an end feed.

42

15 15

57

15 15 15

15 15 15 15

72

87

15 15 15 15 15

102

117

15 15 15 15 15 15

15 15 15 15 15 15 15

3P

4P

5P

6P

7P

8P

27.5 27.52997

150130

1515

1515

1515 5.

5

1013

26

1515

1515 A

1515

15

6

12

14

61

●Standard length is 3m, but units up to 6m available by special order.

Note: Please don’t use in the place where in high temperature and high humidity.

●Dimensions

Drawing shows an 8P joiner.

Drawing shows an 8P joiner.

Number of feedcables

The length of a feed cable is 500mm.

UL

Center feed-in Joiner UL Listed

ULULULULULUL

ULULULULULUL

Cat. No. Sheathcolor

OrangeLight Blue

Rating

600V90A600V90A

Standardlength

3m3m

Weight(kg)1.001.00

Units perbox——

Units percarton

2020

DH5801DH5801L

Cat. No. Rating A Weight(kg)

Units perbox

Units percarton

2P600V90A3P600V90A4P600V90A5P600V90A6P600V90A7P600V90A8P600V90A

3247627792

107122

0.140.170.220.280.340.390.45

1111111

40403020202020

DH5822DH5823DH5824KDH5825KDH5826KDH5827KDH5828K

Cat. No. Rating A Weight(kg)

Units perbox

Units percarton

2P600V90A3P600V90A3P600V90A1P600V30A3P600V90A2P600V30A3P600V90A3P600V30A3P600V90A4P600V30A3P600V90A5P600V30A

3247627792

107122

0.430.640.770.891.021.141.26

1111111

10101010101010

DH5862DH5863DH5864DH5865DH5866DH5867DH5868

22E 8E——12345

2333333

2P3P4P5P6P7P8P

19

Used to separate circuits by providing an insulated section

on the line. In addition to providing insulation between two

circuits, it feeds power to one of the separated circuits.

2615

10

98 500

AWG18(0.75E)

30(Insulated section)

Used to guide the collector arms from one straight

section to another via turntables and traversers. Also

used as an end cap for closing off the end of a Tro-

Reel HS unit.

B

26

35

15151515151515

10

A

Two M5 screws8A max. thread depth

Used to guide the collector arms from one curved

section to another via traversers. The end is a front-

facing 45° angle.

A15 15 15 15 15 15 15

3126

B Two M5 screws8A max. thread depth

35

56

42.5

17.5

45°

Used to guide the collector arms from one curved

section to another via and traversers. The end is a

rear-facing 45° angle.

A15 15 15 15 15 15 15

2526

35

503517.5

45°

B

Two M5 screws8A max. thread depth

Drawing shows an 8P guide cap.

Drawing shows an 8P guide cap.Drawing shows an 8P guide cap.

Guide cap(front-facing)

Guide cap(rear-facing)

Guide cap(front-facing)

Guide cap(rear-facing)

Insulating piece UL Listed UL

Guide cap (protrusive 45° cut) UL Listed Guide cap (withdrawn 45° cut) UL Listed

Guide cap (right-angle cut) UL Listed

Cat. No. Rating

300V1A

Weight(kg)0.03

Units perbox

1

Units percarton

60DH5886K

Cat. No. Type

For 2PFor 3PFor 4PFor 5PFor 6PFor 7PFor 8P

A

3247627792

107122

B

153045607590

105

Weight(kg)0.030.030.040.050.060.070.09

Units perbox

1111111

Units percarton

50503535202020

DH5832DH5833DH5834KDH5835KDH5836KDH5837KDH5838K

Cat. No. Type

For 2PFor 3PFor 4PFor 5PFor 6PFor 7PFor 8P

A

3247627792

107122

B

153045607590

105

Weight(kg)0.040.040.060.070.090.100.12

Units perbox

1111111

Units percarton

45453525151515

DH5842DH5843DH5844KDH5845KDH5846KDH5847KDH5848K

Cat. No. Type

For 2PFor 3PFor 4PFor 5PFor 6PFor 7PFor 8P

A

3247627792

107122

B

153045607590

105

Weight(kg)0.040.040.060.070.090.100.12

Units perbox

1111111

Units percarton

45453525151515

DH5852DH5853DH5854KDH5855KDH5856KDH5857KDH5858K

ULULULULULUL

ULULULULULULULULULULULUL

20

Unit:mm

B

A15 15 15 15 15 15 15

352513

Two M5 screws8A max. thread depth

Drawing shows an 8P hanger.

Hanger UL Listed

Attached to the moving equipment and used to supply power from the Tro-Reel HS

unit to the equipment. Mount rod and mount plate types are available to fit mounting

hardware.Length of lead wire 300A

The collector arms should be replaced when it wears down to the replacement indication line. Typical collector service life is approximately 20,000km.

Collector arms UL Listed

Cat. No. Type

For 2PFor 3PFor 4PFor 5PFor 6PFor 7PFor 8P

A

3247627792

107122

B

153045607590

105

Weight(kg)0.030.030.040.050.060.060.07

Units perbox

1111111

Units percarton

50503535202020

DH5872DH5873DH5874KDH5875KDH5876KDH5877KDH5878K

Cat. No. Type Rating Weight(kg)

Units perbox

Units percarton

Single (for mount rod)

Tandem (for mount rod)

Tandem (for mount plate)

Single (no saddle)

1P600V30A1P600V30A×21P600V30A×2

1P600V30A

0.140.230.230.11

1111

16161616

DH58901K1DH58911K1DH58912K1DH58920K1

Used to mount the Tro-Reel HS

units on the side of the rail.

Hangers should be used a t

intervals of 600mm or less on

straight sections and 500mm or

less on curved sections.Note: If installation is in a place directly

exposed to cutting oil or similar substances, please consult our Electrical Conduits and Wiring Materials Division.

●Single type (for mount rod) ●Single type (no saddle)

●Tandem type (for mount rod) ●Tandem type (for mount plate)

15

(180

)

4.5

30

65±

10(R

ange

of m

ovem

ent)

6 7

8587.2

65

R3.5-5S

14.8

R3.5-5S

6587.2

170270

76

65±

10(R

ange

of m

ovem

ent)

14.8

30

4.515

(180

)

R3.5-5S

30

76

65±

10(R

ange

of m

ovem

ent)

6587.2

170270

14.8

4.515

(180

)

R3.5-5S

6587.2

19

70

4.5

(180

)

15

76

60±

10(R

ange

of

mov

emen

t)

●Single type (for mount rod)

●Tandem type (for mount rod)

●Tandem type (for mount plate)

●Single type (no saddle)

Note: Does not include mount rod 12×12.

Note: Does not include mount rod 12×12.

Note: Does not include mount plate for mounting.

ULULULULULUL

UL

21

■TRO-REEL HS (Non-Tension Type)

120120120 100101P600V30A

Collector arm supporting components Collector (replacement part)

These components are mounted on the collector arm.

They keep the arm horizontal and minimize uneven abrasion of the collector shoe.

It is also possible to mount them on existing collector arms.

Typical collector service life is approximately

5,000km.

Sheath cutter

This labor-saving tool makes it possible to cut the insulating sheath of the Tro-

Reel HS units with just one hand.

8085

30

14.8

65±1

0(R

ange

of m

ovem

ent)

7

7

15

4590°15

●For single type (no saddle) ●For tandem type and single type (for mount rod)

●For tandem type (for mount plate)

※Two units are required when mounting on the tandem type.

Cat. No.

Cat. No.

Type

RatingSingle (no saddle)

Tandem, single (for mount rod)Tandem (for mount plate)

Weight(kg)

Weight(kg)

0.0130.0070.017 0.06

Units perbox

Units perbox

121212

Units percarton

Units percarton

DH58870DH58871DH58872 DH5883K

Conductor cleaner

This nylon brush is used to clean the

conductor surface of the Tro-Reel HS units.

Note: UL standards do not apply.Note: UL standards do not apply.

Note: UL standards do not apply. Note: UL standards do not apply.

Note: This collector is a replacement part for using collector arms which are of an earlier type than the collector arms listed on page 21 of this catalog.

Cat. No. Type

Single (for mount rod)

Weight(kg)0.11

Units perbox

1

Units percarton

16DH58851K1

Cat. No. Weight(kg)0.40

Units perbox

1

Units percarton

10DH5884K1

290

4.510065

Replacement line

300

7

4.5

3.5-5S

22

TRO-REEL HS (Non-Tension Type)■

Unit:mm