MACHINE TOOL ACCESSORIES
PRODUCTCATALOGUE
2018
TEN SOONUsers’ Experience is our Priority!
Ten Soon Machine Tools, Inc.2nd Floor, Bldg. 4 No. 124 North Science Avenue,
Laguna Technopark SEPZ, Biñan City, Laguna(049) 572 3717 | (049) 545 4658
[email protected]@ts-machinetools.com
Committed to customer satisfaction through quality product and service provision,Ten Soon Machine Tools provides precision cutting tools, Machine Tool Accessories and Machine Tool Holders;
enabling its clients to focus on efficient machining. It offers variety of innovative products contemporaneous with the industrial and technological progress.
After-sales is also a paramount as Ten Soon closely collaborates with its clients during its growth process,creating mutual benefit, growth, and sustainable development
through excelllent products with them.
Provides Solutionto all your machining requirements.
Users’ Experience is Our Priority
Company Profile
Ten Soon Machine Tools, Inc. (Terng Shuenn) was founded in 1989 at Taipei, Taiwan. With its high quality products and customer-oriented service, Ten Soon became the most famous machine tool accessories supplier in Taiwan. In 1992, it expanded its business in China with the establishment of Jousn (Ten Soon China) at Dongguan, China, and has established almost 13 branches around the country.
In 2018, Ten Soon Machine Tools was established in Laguna Technopark, Biñan City, Laguna, Philippines. With its company tagline of " Users' Experience is our Priority", Ten Soon Machine Tools, Inc. aims to become the leading local and professional machine tools supplier across the national market by providing quality and superior products and service to attain customers’ need and satisfaction.
TEN SOONMACHINE TOOLS, INC.
Users’ Experience is Our Priority
TEN SOONMACHINE TOOLS, INC.
is an
authorized distributorof
Ask for a CATALOG now!
RICH TOOLSi
TABLE OF CONTENTS
RICH-GP1/8 P.08 RICH-GP1/4 P.08 RICH-GP136 P.07 RICH-GP128 P.07 RICH-GP68 P.06 RICH-GP46 P.06
RICH-GP85 P.06 RICH-GP100 P.05 RICH-AB P.05 RICH-U P.05 RICH-AH P.04 RICH-HW P.04
RICH-KV P.03 RICH-RAV P.03 RICH-AHT P.02 RICH-RMV P.02 RICH-BV P.01 RICH-BHV P.01
MILLING MACHINE ACCESSORIES
RICH-SCF P.12 RICH-SCT P.12 RICH-PFJ P.11 RICH-PTJ P.11 RICH-SPC P.10 RICH-SHC P.10
LATHE MACHINE ACCESSORIES
i
ContentTable
MACHINE TOOL ACCESSORIES SERIES ii
RICH-VSSB P.19 RICH-VSSA P.19 RICH-CHM P.18 RICH-VSTB P.18 RICH-VSTA P.18 RICH-VSE P.17
RICH-VSD P.17 RICH-VSC P.16 RICH-VSB P.16 RICH-VSA P.15 RICH-SEV-1.5 P.15 RICH-SEV-1 P.15
TABLE OF CONTENTSGRINDING MACHINE ACCESSORIES
RICH-PFC P.24 RICH-PFB P.23 RICH-PFA P.23 RICH-PGC P.22 RICH-PGB P.22 RICH-PGA P.21
RICH-WHV P.21 RICH-VSEDM P.21 RICH-VG P.20 RICH-VS P.20 RICH-V P.20 RICH-VSSC P.19
RICH-FWT P.27 RICH-PFH P.26 RICH-PFG P.26 RICH-PFF P.25 RICH-PFE P.25 RICH-PFD P.24
RICH-UWD P.30
RICH-ADD P.30 RICH-PDD P.29 RICH-ADC P.29 RICH-ADB P.28 RICH-ADA P.28 RICH-CCFD P.27
RICH TOOLSiii
TABLE OF CONTENTSMAGNETIC TOOLS
RICH-R-PMCM P.37 RICH-R-PMCA P.37 RICH-PMCM P.36 RICH-PMCB P.35 RICH-PMCA P.35 RICH-GVH P.34
RICH-GT P.34 RICH-BA P.34 RICH-GVH P.33 RICH-VVB P.33 RICH-VBC P.32 RICH-VBA P.32
RICH-DHT P.44 RICH-SPD P.43 RICH-SPA04 P.43 RICH-EMCM P.42 RICH-EMCA P.42 RICH-EMCU P.41
RICH-EMCP P.41 RICH-MSPIA P.40 RICH-MSPI P.39 RICH-MSPD P.39 RICH-MSPM P.38 RICH-MSPA P.38
RICH-RB MB P.45 RICH-RTUH P.45 RICH-RTUM P.45 RICH-RTLM P.44 RICH-DPT P.44
ContentTable
MACHINE TOOL ACCESSORIES SERIES iv
TABLE OF CONTENTSMEASURING TOOLS
OTHER MACHINE ACCESSORIES
RICH-S P.49 RICH-HSQ P.48 RICH-AP P.48 RICH-SBI P.47 RICH-SBM P.47 RICH-SB P.47
RICH-SPG P.51 RICH-SPCI P.51 RICH-CZC P.50 RICH-CZB P.50 RICH-CZA P.50 RICH-W P.49
RICH-CMSW P.54 RICH-CMSC P.54 RICH-CMGW P.53 RICH-CMFMC P.53 RICH-U2 P.53
HOT SALE PRODUCTS!
RICH-RSE1125 P.58 RICH-RSE413 P.58 RICH-RSD320 P.57 RICH-RSD213 P.57 RICH-AG700 P.56 RICH-AG500 P.56
Milling MachineAccessories
Milling MachineAccessories
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
Precision Machine Vise
RICH TOOLS01
RICH-BHV MC Hydraulic Precision Vise
unit: mm
A
101131161161201
B
380445535585610
C
480545635685710
Model
RICH BHV - 100VRICH BHV - 130VRICH BHV - 160VRICH BHV - 160VLRICH BHV - 200V
D
8595105105110
Weight(kg)27 40 58 62 81
E
14855585863
F
8085100100108
G
125150165165190
I
1618181818
J135190250300300
Jaw Opening (Max)J1200250330380370
J2240300370420430
J3330390480530550
ClampForce
4000 kgf5000 kgf5500 kgf5500 kgf6900 kgf
RICH-BV MC Angle Lock Precision Vise
unit: mm
A
101131161161201
B
380445535585610
C
440505595645670
Model
RICH BV - 100VRICH BV - 130VRICH BV - 160VRICH BV - 160VLRICH BV - 200V
D
8595105105110
Weight(kg)26 39 59 61 80
E
4855585863
F
8085100100108
G
125150165165190
I
1618181818
J125180250300300
Jaw Opening (Max)J1190240330380370
J2230290370420430
J3330390480530550
Milling MachineAccessories
MILLIN
G
Precision Machine Vise
MACHINE TOOL ACCESSORIES SERIES 02
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-RMV MC Power Vise - Machine Type
unit: mm
A
101131161201
B
400465555630
C
490555645720
Model
RICH RMV - 100VRICH RMV - 130VRICH RMV - 160VRICH BMV - 200V
D
8595105110
Weight(kg)
27 kgs40 kgs60 kgs81 kgs
E
48555863
F
8085100108
G
125150165190
I
16181818
J155230300300
Jaw Opening (Max)J1200250330370
J2240300370430
J3330390480550
ClampForce
3000 kgf3500 kgf4000 kgf4500 kgf
RICH-AHT Tilting Hydraulic Machine Vise
unit: mm
A
100150
B
3651
C
0-1700-300
Model
RICH AHT4RICH AHT6
D
50⁰50⁰
RotaryTable
410
a
505775
b
325410
c
6595
e
177237
f
141186
g
80100
h
184240
ClampForce
2500kgf5000kgf
Weight(Bench)
2363
d
160240
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
Precision Machine Vise
RICH TOOLS03
unit: mm
A
97125150200
B
294368460620
Model
RICH KV - 4”RICH KV - 5”RICH KV - 6” RICH KV - 8”
D
48606585
G.W.(kg)10162757
E
34364363
G
32344360
J
6080115150
RICH-KV K-Type Milling Vise
RICH-RAV Angle Lock Vise
unit: mm
A
106138155154206
B
320358420448554
Model
RICH RAV - 4”RICH RAV - 5”RICH RAV - 6” RICH RAV - 6 - 1/2”RICH RAV - 8”
D
6062726884
G.W.(kg)2029405062
E
3636485063
G
2832483852
W
112132152152210
J
100110150200200
!
Milling MachineAccessories
MILLIN
G
Precision Machine Vise
MACHINE TOOL ACCESSORIES SERIES 04
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-HW Hydraulic Machine Vise
unit: mm
Model
RICH HW - 5RICH HW - 6RICH HW - 8
A
505605700
BMin570625725
Max7959351035
C
190240280
D
170210240
E
130160200
F
7282100
G
127140163
H
160192240
I
106117146
J
75101115
K
180195265
L
180195265
M
141414
N
280334420
O
266320420
P
260310390
Q
323550
R
161818
RICH-AH Hydraulic Precision Vise
unit: mm
A
100125150200
B
36465162
C
0-1700-2220-3000-300
Model
RICH AH4RICH AH5RICH AH6RICH AH8
a
525670800900
RotaryTable
471016
b
435540610700
d
160185240280
e
94117133165
g
7898116160
h
101112127165
j
263341380435
k
120145200240
ClampForce2500400050007000
Weight(Bench)
18326090
f
587282100
i
155184205265
c
395490570650
RICH-U Universal Angle Block Set
unit: Inch
Model
RICH - UARICH - UB
W
1³/16”1¹/2”
H
1³/16”1¹/2”
L
3”4”
N.W.
1.8 kg3.6 kg
RICH-AB Angle Block
unit: Inch
Model
RICH - AB1
RICH - AB2
Specifications
1°, 2°, 3°, 4°, 5°, 10°, 15°,20°, 25°, 30°
1/4°, 1/2°, 1°, 2°, 3°, 4°, 5°, 10°,15°, 20°, 25°, 30°
Pcs/Set
10
12
N.W.
1 kg
1.1 kg
RICH-GP100 Ground Parallels Set
unit: mm
Model
RICH-GP100
L
100100100100150150150150
Pcs
22222222
W
5681012141822
H
1618243036486062
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
Parallels
RICH TOOLS05
Milling MachineAccessories
MILLIN
G
Parallels
MACHINE TOOL ACCESSORIES SERIES 06
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-GP85 Ground Parallels Setunit: mm
Model
RICH-GP85(18 PCS)
L
150150150150150150150150150
Pcs
222222222
W
8.58.58.58.58.58.58.58.58.5
H
141620243032364044
RICH-GP46 Ground Parallels Set
unit: mm
Model
RICH-GP46(12 PCS)
L
150150150150150150
Pcs
222222
W
4.64.64.64.64.64.6
H
323436384042
RICH-GP68 Ground Parallels Set
unit: mm
Model
RICH-GP68(14 PCS)
L
150150150150150150150
Pcs
2222222
W
6.86.86.86.86.86.86.8
H
15182125273135
unit: mm
Model
RICH-GP136 (36 PCS)
L
150150150150150150150150150150150150150150150150
Pcs
2222222222222222
W
8888888888888888
H
16182022242628303234363840424446
unit: Inch
Model
RICH - GP128 (28 PCS)
W
1010101010101010101010101010
H
1416182022242628303235404550
L
150150150150150150150150150150150150150150
N.W.
22222222222222
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
Parallels
RICH TOOLS07
RICH-GP136 Ground Parallels Sets
RICH-GP128 Ground Parallels Set
Milling MachineAccessories
MILLIN
G
Parallels
MACHINE TOOL ACCESSORIES SERIES 08
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
unit: Inch
Model
RICH-GP1/4
L
666666666
Pcs
222222222
W
¹/4¹/4¹/4¹/4¹/4¹/4¹/4¹/4¹/4
H
1³/4⁷/81
1¹/81¹/41³/81¹/21⁵/81³/4
Hole
⁵/16⁵/16⁵/16³/8³/8⁷/16⁷/16¹/2¹/2
unit: Inch
Model
RICH-GP1/8
L
6666666666
Pcs
2222222222
W
¹/8¹/8¹/8¹/8¹/8¹/8¹/8¹/8¹/8¹/8
H
¹/2⁵/8³/4⁷/81
1¹/81¹/41³/81¹/21⁵/8
Hole
¹/4¹/4⁵/16⁵/16⁵/16³/8³/8¹/2¹/2¹/2
RICH-GP1/4 Ground Parallels Set
RICH-GP1/8 Ground Parallels Set
Lathe MachineAccessoriesLathe MachineAccessories
Soft Jaws PartsRICH-SHC Soft Jaw for Hydraulic Chucks
Material: Steel (S45C)
S-151627395110129165165180180
Model
RICH-SHC04RICH-SHC05RICH-SHC06RICH-SHC08RICH-SHC10RICH-SHC12RICH-SHC15RICH-SHC18RICH-SHC21RICH-SHC24
SerrationPitch
1.5 x 60⁰1.5 x 60⁰1.5 x 60⁰1.5 x 60⁰1.5 x 60⁰1.5 x 60⁰1.5 x 60⁰1.5 x 60⁰3.0 x 60⁰3.0 x 60⁰
Weight(kg)0.50.71.52.53.66.212.612.616.216.2
S-223233135404862626262
S-323273037424862627070
S-4¹⁰/810121416¹⁸/21
²²/25.5²²/25.52525
DimesionsS-5445555⁸/5⁸/599
S-610101624303937374040
S-7¹⁴/15¹⁴/182025303043436060
S-827383746506085858080
S-913171822272837374545
S-10M8 x 20M8 x 20M10 x 25M12 x 30M12 x 30M14/M16
M20M20M20M20
unit: mm
RICH-SPC Soft Jaw for Powerful Chucks
A
8095110125160
Model
RICH-SPC06RICH-SPC07RICH-SPC09RICH-SPC12RICH-SPC16
M
201818
40.548
Weight(kg)1.51.71.95.311
B
2631314250
C
3232325470
D
31.844.4553.9863.576.2
E
12.6812.6819.0319.0319.03
F
7.947.9412.712.712.7
G
M8M10M12M12M16
H
2124283442
J
1417191925
K
3.53.53.53.53.5
unit: mm
N
8.511131317
MILLIN
GLATH
EG
RIN
DIN
GM
AG
NETIC
MEA
SUR
ING
OTH
ERS
HO
T SALES
Lathe MachineAccessories
MACHINE TOOL ACCESSORIES SERIES 10
Scroll Chuck Series
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS11
RICH-PTJ 3 Jaws Chuck Powerful Type
Model
RICH-PTJ6RICH-PTJ7RICH-PTJ8RICH-PTJ9RICH-PTJ10RICH-PTJ12RICH-PTJ16
Max.Speed
(RPM)
2000200020002000180018001500
IDClampingØ55-150Ø62-170Ø62-170Ø70-210Ø80-250Ø90-290Ø110-380
unit: mm
ODClamping
Ø8-160Ø8-180Ø8-180Ø11-220Ø12-260Ø15-300Ø30-400
A
167193203233272310405
B
657676848696122
C
130155160190230260345
D
147172176210250285375
E
4558587089105145
F
555667
8.5
G
3M103M103M103M123M123M123M14
H
6882829494118150
J
26282832324045
K
394343505056
75.5
L
10111112121415
Weight(Kg)
913.815.522
29.743.598
RICH-PFJ 4 Jaws Scroll Chuck Powerful Type
Model
RICH-PFJ7RICH-PFJ9RICH-PFJ12RICH-PFJ16
Max.Speed
(RPM)
2000200018001500
IDClampingØ62-170Ø72-210Ø90-290Ø110-380
unit: mm
ODClamping
Ø8-180Ø11-220Ø15-300Ø30-400
A
192232310405
B
768496122
C
155190260345
D
172210285375
E
5870105145
F
567
8.5
G
3M103M123M126M14
H
8274118150
J
28324045
K
435056
75.5
L
11121415
Weight(Kg)14.122.24395
MILLIN
GLATH
EG
RIN
DIN
GM
AG
NETIC
MEA
SUR
ING
OTH
ERS
HO
T SALES
Lathe MachineAccessories
MACHINE TOOL ACCESSORIES SERIES 12
Scroll Chuck SeriesRICH-SCT 3-Jaw Tranditional Type Chuck
Model
RICH SCT-3RICH SCT-4RICH SCT-5RICH SCT-6RICH SCT-7RICH SCT-8RICH SCT-9RICH SCT-10RICH SCT-12RICH SCT-16
Max.Speed
(RPM)
2500250025002000200020002000180018001500
IDClampingØ24-64Ø32-84
Ø35-100Ø48-150Ø56-170Ø56-170Ø62-210Ø70-250Ø86-290
Ø100-380
unit: mm
ODClamping
Ø2-70Ø3-90Ø3-110Ø4-160Ø4-180Ø4-180Ø5-220Ø6-260
Ø10-300Ø14-400
A
85112130167192202232273310405
B
455860657676848696122
C
6080100130155160190230260345
D
7395115147172176210250285375
E
1624324558587089105145
F
3.54.54.5555667
8.5
G
3M63M83M8
3M103M103M103M123M133M126M14
H
3542506575758598110146
J
11141619222224283040
K
15182027282833374456
L
788
10111112121415
Weight(Kg)1.53.75.29.3
14.216
22.731.844.8102
RICH-SCF 4 Jaws Scroll Type
Model
RICH SCF-7RICH SCF-9RICH SCF-12RICH SCF-16
Max.Speed
(RPM)
2000200018001500
IDClampingØ56-170Ø62-210Ø86-290
Ø100-380
unit: mm
ODClamping
Ø4-180Ø5-220
Ø10-300Ø14-400
A
192232310405
B
768496122
C
155190260345
D
172210285375
E
5870105145
F
567
8.5
G
3M103M123M126M14
H
7585110146
J
22243040
K
28334456
L
11121415
Weight(Kg)14.823.247
107
Grinding MachineAccessories
Grinding MachineAccessories
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
Tool Maker Vise
RICH TOOLS15
RICH-SEV-1 1” Stainless Electrode Vise
SUS4400.004mm/100mm0.004mm/100mmHRC 56⁰ - 58⁰
Parameters
Material:Parallelism:Squareness:Hardness:
RICH-SEV-1.5 1.5” Stainless Electrode Vise
SUS4400.004mm/100mm0.004mm/100mmHRC 56⁰ - 58⁰
Parameters
Material:Parallelism:Squareness:Hardness:
RICH-VSA Tool Maker Vise
unit: mm
A
105150176190245
B
3648637398
Model
RICH-VSA15RICH-VSA20RICH-VSA25RICH-VSA30RICH-VSA40
C
4853596890
N.W.(kg)1.02.03.34.610.0
D
2025303545
E
2828293345
F
2025303545
G
0-450-750-950-1050-135
Grinding MachineAccessories
MILLIN
G
Tool Maker Vise
MACHINE TOOL ACCESSORIES SERIES 16
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-VSC PrecisionTool Maker Vise (SKS)
unit: mm
A
135160170
B
487073
Model
RICH-VSC20RICH-VSC25RICH-VSC30
C
426265
N.W.(kg)0.92.93.2
D
203032
E
223233
F
233335
G
628090
RICH-VSB Tool Maker Vise of Plugs Type
unit: mm
A
100150170190225235287340
B
364863738898125152
Model
RICH-VSB15RICH-VSB20RICH-VSB25RICH-VSB30RICH-VSB35RICH-VSB40RICH-VSB50RICH-VSB60
C
455863678585100100
N.W.(kg)0.61.62.53.76.57.813.519.1
D
2030353545455050
E
2528283240405050
F
2030303540405050
G
407590100120125150200
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
Tool Maker Vise
RICH TOOLS17
RICH-VSD Tool Maker Vise of Screw Type (A)
unit: mm
A
155176181250250
B
4863738898
Model
RICH-VSD20RICH-VSD25RICH-VSD30RICH-VSD35RICH-VSD40
C
5460707373
N.W.(kg)1.93.14.77.78.9
D
2530303838
E
2930403535
F
2525303535
G
607575125125
RICH-VSE Tool Maker Vise of Screw Type (B)
unit: mm
A
90160175
B
607073
Model
RICH-VSE20RICH-VSE25RICH-VSE30
C
506265
N.W.(kg)1.53.64.3
D
253032
E
253233
F
253335
G
308095
Grinding MachineAccessories
MILLIN
G
Tool Maker Vise
MACHINE TOOL ACCESSORIES SERIES 18
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-VSTA Tool Maker Vise of Small Type (A)
RICH-VSTB Tool Maker Vise of Small Type (B) - For Stainless Use
RICH-CHM Universal Vise
unit: mm
A
110
B
70
Model
RICH-CHM80
C
33
N.W.(kg)12.9
D
32
E
80
F
141
G
77
H
64
S
162
J
180
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
Tool Maker Vise
RICH TOOLS19
RICH-VSSA Tool Maker Vise of Stainless Steel (A)
RICH-VSSB Tool Maker Vise of Stainless Steel (B)
unit: mm
A
140180
B
5072
Model
RICH-VSSB200RICH-VSSB300
C
5362
N.W.(kg)1.83.8
D
2530
E
2832
F
2535
G
75100
RICH-VSSC Tool Maker Vise of Stainless Steel (C)
unit: mm
L
160180
A
7070
Model
RICH VSSC-25RICH VSSC-30
B
6269
N.W.(kg)
45
C
3030
D
3235
E
0-800-100
Grinding MachineAccessories
MILLIN
G
Tool Maker Vise
MACHINE TOOL ACCESSORIES SERIES 20
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-V Sine Vise of Screw type
unit: mm
A
155175180250
B
48637398
Model
RICH-V200RICH-V250RICH-V300RICH-V400
C
9396103107
N.W.(kg)3.55715
D
25303038
E
35334045
F
25253035
G
607075125
RICH-VS Sine Vise
unit: mm
A
155170180245
B
48637398
Model
RICH-VS20RICH-VS25RICH-VS30RICH-VS40
C
95103103125
N.W.(kg)
35615
D
30353545
E
32353545
F
30303545
G
659090125
RICH-VG Precision Sine Vise
unit: mm
A
160
B
73
Model
RICH-VG73
C
30
N.W.(kg)6.5
D
94
E
100
J
33
Max. Angle
46⁰
H
45
G
0-78
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
Tool Maker Vise
RICH TOOLS21
RICH-VSEDM Stainless Precision Vise for EDM Type
RICH-WHV 1.5” Stainless Electrode Vise
unit: mm
A
235320
B
2525
Model
RICH-WHV100RICH-WHV150
C
135145
N.W.(kg)4.76.2
D
5060
E
8585
F
5060
G
100150
RICH-PGA Small Punch Grinder
Specifications
Applicable for dia Ø0.5 - Ø 6mm ultra-smallprecision grinding process workpiece.Roller Clamping Range: Ø 0.5 - Ø6mmRoller Clamping Length: 10mmRoller swing precision within 3 µ
Specifications
Using pressing rollers, no correction center,can be easily precision grinding.Smaller diameter appropriate to adjust screwof pressure arm to avoid too much pressureto prevent deformation of workpiece.
Weight (kg)
2.54.22.64.3
Model
RICH-PGA120RICH-PGA120ARICH-PGA120BRICH-PGA120C
Grinding MachineAccessories
MILLIN
G
Punch Grinder
MACHINE TOOL ACCESSORIES SERIES 22
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-PGB Punch Grinder
Specifications:Grinding Diameter: Ø1.5 - Ø25mmOutside Grinding Length: 5 - 3mmAccuracy: 0.005mmWeight: 6kg
Punch grinder is a tool which can be put on the surface off grinding machine for grinding punches. It can do cylindrical grinding automatically.The rollers can be used to adjust the workpiece before grinding.Use screw pressure for firm holding.
RICH-PGC Motor Punch Grinder
Specifications:Grinding Diameter: Ø1.5 - Ø25mmLength of Workpiece: 20-120mmOutside Grinding Length: 5-35mmAccuracy: 0.005mm
Electric Punch grinder is driven by motor to avoid hand fatigue.No center alignment necessary; just put the workpiece on rollers.It can be used with magnetic sine plate tp grind various angle profile punch.
Model
RICH-PGC110
RICH-PGC220
Motor
10V/60Hz 129 R.P.M.
220V/50Hz108R.P.M.
Weight (kg)
11
11
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
Punch Former
RICH TOOLS23
RICH-PFA Punch Former - Standard Type
Specifications:Indexing Div: 24 (every15⁰) ±10 seconds Center Height: 80mmMax Diameter can pass through: 30mm V-block Clamp Range: 24mm (Up); 16mm (Down)Dressing range of convex angle: 48mm Dressing range of concave angle: 100mmDeflection with roung rod: under 2µ Deflection with 50mm round rod: under 6µMaximum swing diameter: 200mm Weight: 9.5kg
RICH-PFB Punch Former - 2 Way
Specifications:Indexing Div: 24 (every15⁰) ±10 secondsCenter Height: 80mmV-block Clamp Range: Ø3 - Ø30mmActivities of V-block: 24MM (Up); 16mm (Down)Both sides activities of V-block: 12.4 mm eachDressing range of convex angle: 48mmDressing range of concave angle: 100mmMaximum swing diameter: 200mmDeflection with roung rod: under 2µDeflection with 50mm round rod: under 6µWeight: 10kg
Model
RICH-PFB*110V
RICH-PFB*220V
Motor
110V/60Hz 129 R.P.M.
220V/50Hz108R.P.M.
Weight (kg)
11
11
Grinding MachineAccessories
MILLIN
G
Punch Former
MACHINE TOOL ACCESSORIES SERIES 24
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-PFC 3-Jaw Punch Former
Specifications:Swivel Center High: 80 mm Indexing Division: 24 (every15⁰) ±10 secondsMax Diameter can pass through: 16mm 3-jaws outer diameter: 85mm length:60mmOuter clamping gripping diameter: Ø2 - Ø70 mm Internal clamping gripping diameter: Ø24 - Ø64 mm
3-jaws ounch former is easy to clamp workpiece, easy to use, and easy to disassemble.
RICH-PFD Motor Punch Former
Specifications:V-block Clamp range: Ø3 - Ø30mmActivities of V-block: 24mm (Up); 16mm (Down)Max swing diameter: 200mmDeflection with roung rod: under 2µDeflection with 50mm round rod: under 6µ
Motor punch former driven by motor, without hand manual operation, thus saving processing time.
Model
RICH-PFD*110V
RICH-PFD*220V
Power
AC 110V 50/60HzSINGLE PHASE
AC 220V 50/60HzSINGLE PHASE
Speed
16-233R.P.M
16-233R.P.M
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS25
Punch FormerRICH-PFE ER Collet Dividing Punch Former
Specifications:Swivel Center High: 80 mmIndexing Division: 24 (every15⁰) ±10 secondsER32 Collet Clamping Range: Ø2-20 mmER40 Collet Clamping Range: Ø3-26 mmER50 Collet Clamping Range: Ø10-35 mmBody max diameter pass through: 16mmWeight: 10.5 kg
ER collet have ER32, ER40, ER50 standards.Adjustment design function: user can adjust.
Model
RICH-PFE ER32RICH-PFE ER40RICH-PFE ER50
ER Collet
ER32ER40ER50
Model
RICH-PFE ER32RICH-PFE ER40RICH-PFE ER50
Collet Size
φ6,φ8,φ10,φ12,φ16,φ20φ6,φ8,φ10,φ12,φ16,φ20,φ25
φ12,φ14,φ16,20,φ26,φ32
Weight(kg)
1010.511
Clamping Range
φ6-φ20φ3-φ26φ10-φ34
RICH-PFF Punch Former (Centering Type)
Specifications:Swivel Center High: 80 mmIndexing Division: 24 (every15⁰) ±10⁰Parallelism: 0.002/100 mmRoundness: 0.002/100 mm
Model
RICH-PFF300RICH-PFF400RICH-PFF500RICH-PFF600
C
130130130130
A
300400500600
B
80808080
L
0-1200-2200-3200-420
Weight (kg)
192225
28.5
unit: mm
Grinding MachineAccessories
MILLIN
G
Punch Former
MACHINE TOOL ACCESSORIES SERIES 26
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-PFG Punch Former (Centering & 3-Jaw Type)
Specifications:Swivel Center High: 80 mmIndexing Division: 24 (every15⁰) ±10⁰3-Jaws outer Dia: 85mmxlength:60mmOuter Clamping gripping diameter: Ø2-Ø70 mmInternal Clamping gripping diameter: Ø24-Ø64 mmParallelism: 0.002/100 mmRoundness: 0.002/100 mm
Model
RICH-PFG300RICH-PFG400RICH-PFG500RICH-PFG600
C
130130130130
A
300400500600
B
80808080
L
0-900-1900-2900-390
Weight(kg)
192225
28.5
unit: mm
RICH-PFH Motor Punch Former (Centering Type)
unit: mm
A
300300400400500500600600
B
8080808080808080
Model
RICH-PFH300*110VRICH-PFH300*220VRICH-PFH400*110VRICH-PFH400*220VRICH-PFH500*110VRICH-PFH500*220VRICH-PFH600*110VRICH-PFH600*220V
Weight(kg)222225252828
31.531.5
C
130130130130130130130130
L
0-1200-1200-2200-2200-3200-3200-4200-420
Power(Single Phase)
AC110V 50/60Hz AC220V 50/60Hz AC110V 50/60Hz AC220V 50/60Hz AC110V 50/60Hz AC220V 50/60Hz AC110V 50/60Hz AC220V 50/60Hz
Speed(rpm)
16-23316-23316-233 16-23316-23316-23316-23316-233
Specifications:Swivel Center High: 80mm Indexing Division: 24 (every 15⁰) ±10⁰Parallelism: 0.002/100mm Roundness: 0.002/100mm
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS27
Punch FormerRICH-FWT Diamond CBN Flat Wheel Truer
Specifications:The grinding wheel is made of resin, especially for diamond flat wheel.The spindle could be milled high-speed rotation with precision bearings to ensure accuracy and stability.
Model
RRICH-FWT100RICH-FWT110RICH-FWT220
Motor
------110V/60Hz (1Phase)220V/60Hz (1Phase)
Weight (kg)
4.56.56.5
Angle DresserRICH-CCFD Concave Convex Forming Dresser
Specifications:Max. Dressing Diameter of Grinding Wheel: 210 mm (8”)Dressing Range of Small Swing: Convex (R 0.5-6 mm); Concave (R0.5-20 mm)Dressing Range of Middle Swing: Convex (R 0.5-6 mm); Concave (R0.5-20 mm)Dressing Range of large swing: Convex (R 0.5-40 mm); Concave (R45-90 mm)Weight: 6.2kg
Designed with principle of swing. Fixed the thimble by center, and dressed front and rear by swing.Easy to operate, use the height block or height caliper can add and subtract the height of center.
Grinding MachineAccessories
MILLIN
G
Angle Dresser
MACHINE TOOL ACCESSORIES SERIES 28
LATHE
GR
IND
ING
RICH-ADA Angle Dresser
Especially designed for dressing wheel, collocation use with MCL-350/MCL450, trimmed to required shape of wheel.
Specifications:
RICH-ADB Angle Sine Dresser
Specifications:Parallelism within: 0.005MM Center’s Distance of Spacer: 50 MMDressing range of Angle: 0-60⁰ (Horizontal); 45-90⁰ (Vertical) Dressing range of Length: 60 mmWeight: 1.5 kg
Special for dressing the angle of the grinding wheel and can be used verticallly and horizontally with large range.Use the screws to adjust the tightness and assort with the ngle block to achieve the required angle.
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS29
Angle DresserRICH-ADC Optical Radius Angle Dresser
Specifications:Center Height: 65 mm Max. wheel diameter: Ø200 mmMax. convex radius: 10 mm Max. concave radius: 25.4 mmTangential travel: 22.5 mm Dressing Angle: 90⁰ - 0⁰ -95⁰Weight: 4.2 kg
RICH-PDD Precision Duplex Dresser
Specifications:Max. width of wheel: 40 mm Mini dressing width: 0.2 mmMax. dressing depth: 40 mm Graduation: 0.02 mmWeight: 3.5kg
Suitable for surface grinder and the precision can reach the dresser with fixed thickness.Wheel dressing can synchronized the thickness of both sides and single-side.
Grinding MachineAccessories
MILLIN
G
Angle Dresser
MACHINE TOOL ACCESSORIES SERIES 30
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-ADD Radius and Angle Dresser
Specifications:Max. Wheel Diameter: Ø210 mm(8”) Slide of Center is retractable to 25 mmMax. convex radius: 60 mm Max. concave radius: 150 mmTangential travel: 90 mm Weight: 9.5 kg
For surface grinder, can be used for R angles and variety of angles.Auto-zero designed, the R angle of demand can be easily done with the block in fixed height of swing center.
RICH-UWD Universal Wheel Dresser
Specifications:Center Height: 193 mm Measuring Quasi-Pin Diameter: Ø10 mmMax. swing distance of diamond cutter: ± 14 mm Max. wheel diameter: Ø200 mmMax. Convex Radius: 50 mm Max. concave radius: 0-100 mmReading accuracy of turret index: 5’ Max. translation of feed: 25 mmFeed per division of Handle scale: 0.01 mm
RICH-UWD Universal Wheel Dresser adoptable on surface grinding and universal tool grinder for dressing grinding wheels into various cross sections of flat or curved shapes.
MIL
LIN
G
31
MagneticToolsMagneticTools
RICH-VBA V-Blocks
unit: mm
A
5075100125150175200250300
B
19243344506270102120
Model
RICH-VBA A2RICH-VBA A3RICH-VBA A4RICH-VBA A5RICH-VBA A6RICH-VBA A7RICH-VBA A8RICH-VBA A9RICH-VBA A10
C
243552698090110122150
Weight(kg)0.30.72.04.68.013.020.225.553.0
D
243750637087100126150
E
172430374550607590
F
131620263035405060
Specifications:Material: SK2 2 pcs of same size in a set and the V-shape slot is in precision angleHarden: HRC 56⁰ ±2 After precision grinding, it can be used to test the concentricity of mandrelV-Shape Slot Precision within: 0.005 mm
MagneticTools
MILLIN
G
Magnetic Blocks
MACHINE TOOL ACCESSORIES SERIES 32
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-VBC V-Blocks with C Clamp
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS33
Magnetic BlocksRICH-VVB V-Blocks
unit: mm
A
63100152
B
635065
Model
RICH-VVB 195RICH-VVB 196RICH-VVB 197
C
4663100
Weight(kg)2.65.215
D
2865110
E
3470120
Specifications:Precision of V-groove: SK2 Material: SK2Hardness: HRC56⁰ ±2
Two of V-Blocks is the same size and grinded precision.For grinding and correcting spindle concentricity.
RICH-GVH Magnetic Square V-Block
unit: mm
HoldingPower
150N(15Kgf)200N(20Kgf)
A70100
Model
RICH-GVH30RICH-GVH40
DimensionB4050
G.W.(kg)
1.1KGx23.2KGx2
D5080
Angle
90°
C5080
MagneticTools
MILLIN
G
Magnetic Blocks
MACHINE TOOL ACCESSORIES SERIES 34
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-BA Magnetic Square V-Block
unit: mm
V-FaceHolding Power
30kgf60kgf
Flat-faceHolding Power
50kgf180kgf
Model
RICH-BA1RICH-BA2
B100150
G.W.(kgs)7.822.5
DimensionL24356
L1100150
H100150
P21724
P145
RICH-GT Magnetic Transfer Block
unit: mm
A
2546
Model
RICH-GT1RICH-GT2
B
5049
G.W.(kg)2.42.2
L
100580
PCS
22
RICH-GVH Magnetic V-Block
unit: mm
HoldingPower55kgf90kgf
Model
RICH-GVH1RICH-GVH2
Surface HoldingPower70kgf110kgf
G.W.(kg)2.25.8
B5676
Length80115
DimensionH72100
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS35
Magnetic ChucksRICH-PMCA Permanent Magnetic Chuck - 8(2+6) Standard Pole Pitch
unit: mm
Model
RICH-PMCA-1018RICH-PMCA-1325RICH-PMCA-1515RICH-PMCA-1530RICH-PMCA-1535RICH-PMCA-1545RICH-PMCA-2040RICH-PMCA-2045RICH-PMCA-2050RICH-PMCA-2060RICH-PMCA-2550RICH-PMCA-3060
Dimension
100x175125x250150x150150x300150x350150x450200x400200x450200x500200x600250x500300x600
A100125150150150150200200200200250300
Height
505050505050505050505050
Weight(kg)
7138192126323640485072
Pole Pitch
8(2+6)8(2+6)8(2+6)8(2+6)8(2+6)8(2+6)8(2+6)8(2+6)8(2+6)8(2+6)8(2+6)8(2+6)
Chucking SizeB
175250150300350450400450500600500600
C145206116256306406356406456556456556
D202020202020202020202020
Chuck Mounting Face
A100125150150150150200200200200250300
E195270175320370470420470520620520620
RICH-PMCB Permanent Magnetic Chuck -5(1+4) Middle Pole Pitch
unit: mm
Model
RICH-PMCB-1018RICH-PMCB-1325RICH-PMCB-1515RICH-PMCB-1530RICH-PMCB-1535RICH-PMCB-1545RICH-PMCB-2040RICH-PMCB-2045RICH-PMCB-2050RICH-PMCB-2550RICH-PMCB-3060
Dimension
100x175125x250150x150150x300150x350150x450200x400200x450200x500250x500300x600
A100125150150150150200200200250300
Height
5050505050505050505050
Weight(kg)
71381921263236405072
Pole Pitch
5(1+4)5(1+4)5(1+4)5(1+4)5(1+4)5(1+4)5(1+4)5(1+4)5(1+4)5(1+4)5(1+4)
Chucking SizeB
175250150300350450400450500500600
C145206116256306406356406456456556
D2020202020202020202020
Chuck Mounting Face
A100125150150150150200200200250300
E195270175320370470420470520520620
MagneticTools
MILLIN
G
Magnetic Chucks
MACHINE TOOL ACCESSORIES SERIES 36
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-PMCM Permanent Magnetic Chuck - 2.5(1+1.5) Micro Pole Pitch
unit: mm
Model
RICH-PMCM-1018RICH-PMCM-1325RICH-PMCM-1515RICH-PMCM-1530RICH-PMCM-1535RICH-PMCM-1545RICH-PMCM-2040RICH-PMCM-2045RICH-PMCM-2050RICH-PMCM-2060RICH-PMCM-2550RICH-PMCM-3060
Dimension
100x175125x250150x150150x300150x350150x450200x400200x450200x500200x600250x500300x600
A100125150150150150200200200200250300
Height
505050505050505050505050
Weight(kg)
7138192126323640485072
Pole Pitch
2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)
Chucking SizeB
175250150300350450400450500600500600
C145206116256306406356406456556456556
D202020202020202020202020
Chuck Mounting Face
A100125150150150150200200200200250300
E195270175320370470420470520620520620
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS37
Magnetic ChucksRICH-R-PMCA Rotary Magnetic Chuck with Standard Pitch
unit: mm
Model
RICH-R-PMCF-1018RICH-R-PMCF-1325RICH-R-PMCF-1530RICH-R-PMCF-1535RICH-R-PMCF-1545
Dimension
100x175125x250150x300150x350150x450
B1100125150150150
Height(H2)145145145145145
Weight(kg)1826303643
Pole Pitch
8(2+6)8(2+6)8(2+6)8(2+6)8(2+6)
Chucking SizeL1175250300350450
L0134204260316414
H19090909090
Rotary StanxB2100100100100100
I1195175270320370
Height(L2)290365415465565
G1212121212
RICH-R-PMCM Rotary Magnetic Chuck with Micropitch
unit: mm
Model
RICH-R-PMCF-1018RICH-R-PMCF-1325RICH-R-PMCF-1530RICH-R-PMCF-1535RICH-R-PMCF-1545
Dimension
100x175125x250150x300150x350150x450
B1100125150150150
Height(H2)145145145145145
Weight(kg)1826303643
Pole Pitch
2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)2.5(1+1.5)
Chucking SizeL1175250300350450
L0134204260316414
H19090909090
Rotary StanxB2100100100100100
I1195175270320370
Height(L2)290365415465565
G1212121212
MagneticTools
MILLIN
G
MACHINE TOOL ACCESSORIES SERIES 38
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
Sine Plate with Magnetic Chucks
RICH-MSPM Sine Plate with Micropitch Magnetic Chuck
Specifications:Accuracy: Center of two-pad within 0.005 mm Parallel: within 0.003 mm/ 100mm Fine Magnetic Chuck is suitable for grinding small workpieces.
unit: mm
A
175150300
B
100150150
Model
RICH-MSPM-1018 RICH-MSPM-1515 RICH-MSPM-1530
C
878787
Weight(kg)101528
D
75100100
F
175150250
E
474747
G
2 (0.5+1.5)2 (0.5+1.5)2 (0.5+1.5)
Angle
0⁰-60⁰0⁰-60⁰0⁰-60⁰
RICH-MSPA Sine Plate with Standard Magnetic ChuckRICH-
unit: mm
A
175150300
B
100150150
Model
RICH-MSPA-1018 RICH-MSPA-1515 RICH-MSPA-1530
C
114109114
Weight(kg)141535
D
75100100
Specifications:Accuracy: Center of two-pad within 0.005 mm Parallel: within 0.003 mm/ 100mmThick polemagnetic tower suitable ofor precision angle grinding.
E
175150300
G
7.5 (1.5+6)7.5 (1.5+6)7.5 (1.5+6)
Angle
0⁰-60⁰0⁰-60⁰0⁰-60⁰
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS39
Sine Plate with Magnetic ChucksRICH-MSPD Double Sine Plate With Micropitch Magnetic ChuckRICH-
unit: mm
A
100200
B
150300
Model
RICH-MSPD-1515 RICH-MSPD-1530
C
130130
G.W.(kg)1848
D
100100
E
150150
F
2.5 (1+1.5)2.5 (1+1.5)
Specifications:Range of Angle Adjustment: 0-60⁰ Accuracy of Center: within 0.005 mmParallel precision:100 mm/0.003 mm
Two-way Sine Plate can be adjusted sin X- axis or Y-axis angle. The user can adjust to simultaneous angle for drilling, milling,grinding, and other precision angle.
RICH-MSPI Integrated Sine Plate With Micropitch Magnetic ChuckRICH-
unit: mm
A
225200300350
B
102152127152
Model
RICH-MSPI-1018 RICH-MSPI-1515 RICH-MSPI-1325 RICH-MSPI-1530
C
84848484
Weight(kg)11.514.820
27.5
D
75100100100
F
175150250300
Specifications:Accuracy: Center of two-pad within 0.005 mm Parallel: within 0.003 mm/ 100mmFine Magnetic Chuck is suitable for grinding small workpieces.
E
47474747
G
2 (0.5+1.5)2 (0.5+1.5)2 (0.5+1.5)2 (0.5+1.5)
Angle
0⁰-60⁰0⁰-60⁰0⁰-60⁰0⁰-60⁰
MagneticTools
MILLIN
G
Sine Plate with Magnetic Chucks
MACHINE TOOL ACCESSORIES SERIES 40
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-MSPIA Integrated Adjustable Sine Plate with Magnetic Chuck
unit: mm
A
130175150
B
75100150
Model
RICH-MSPIA-0813RICH-MSPIA-1018RICH-MSPIA-1515
C
839089
Weight(kg)5.610
13.1
D
5075100
E
374139
Specifications:Range of Angle Adjustment: 0-55⁰ Accuracy of Center: within 0.005 mmParallel precision: 100 mm/0.003 mm
Fine adjusted designed of the handle and easy to adjust the angle.The pole of chuck is fine; suitable for small workpiece processing.
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS41
Electromagnetic ChucksRICH-EMCP Electromagnetic Chucks
unit: mm
Model
RICH-EMCP-2040RICH-EMCP-2050RICH-EMCP-2060RICH-EMCP-2550RICH-EMCP-3060RICH-EMCP-4080RICH-EMCP-40100RICH-EMCP-50100RICH-EMCP-60100
Dimension
200x400200x500200x600250x500300x600400x800400x1000500x1000600x1000
A200200200250300400400500600
Current
1.6A2.8A2.8A2.8A2.8A3.4A4.4A4A5A
Weight(kg)54758090130230288360432
Pole Pitch P1
343734373436363636
Chucking SizeB
400500600500600800100010001000
C328437511433511718915915915
D202020202020202020
Chuck Mounting Face
G196196196246296396396496596
E400500600500600800100010001000
F202020202020202020
F110110110120120120120120120
Voltage
DC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90V
P2323333333233343434
RICH-EMCU Electromagnetic Chucks
unit: mm
Model
RICH-EMCU-1530RICH-EMCU-1535RICH-EMCU-1545RICH-EMCU-2040RICH-EMCU-2045RICH-EMCU-2050RICH-EMCU-2060RICH-EMCU-2550RICH-EMCU-3060
Dimension
150x300150x350150x450200x400200x450200x500200x600250x500300x600
A150150150200200200200250300
Current
0.39A0.52A0.60A0.69A0.90A1.10A1.31A1.52A1.81A
Weight(kg)192329343842516298
Pole Pitch
4(1+3)4(1+3)4(1+3)4(1+3)4(1+3)4(1+3)4(1+3)4(1+3)4(1+3)
Chucking SizeB
300350450400450500600500600
C125125125173173173173225273
D202020202020202020
Chuck Mounting Face
G146146146196196196196246296
E300350450400450500600500600
F202020202020202020
F110110110110110110110110110
Voltage
DC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90V
MagneticTools
MILLIN
G
MACHINE TOOL ACCESSORIES SERIES 42
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
Electromagnetic ChucksRICH-EMCA Electromagnetic Chucks
unit: mm
Model
RICH-EMCA-1530RICH-EMCA-1535RICH-EMCA-1545RICH-EMCA-2040RICH-EMCA-2045RICH-EMCA-2550RICH-EMCA-3060RICH-EMCA-4080RICH-EMCA-40100RICH-EMCA-50100
Dimension
150x300150x350150x450200x400200x450250x500300x600400x800400x1000500x1000
A150150150200200250300400400500
Current
0.15A0.18A0.24A0.47A0.52A0.73A0.97A1.56A1.60A1.72A
Weight(kg)21253238436797182228285
Pole Pitch
15(3+12)15(3+12)15(3+12)15(3+12)15(3+12)15(3+12)15(3+12)15(3+12)15(3+12)15(3+12)
Chucking SizeB
30035045040045050060080010001000
C228288378348378438529725936936
D20202020202020252525
Chuck Mounting Face
G146146146196196246296396396496
E30035045040045050060080010001000
F20202020202020202020
F70707070707070707070
Voltage
DC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90V
RICH-EMCM Electromagnetic Chucks
unit: mm
Model
RICH-EMCM-1530RICH-EMCM-1535RICH-EMCM-1545RICH-EMCM-2040RICH-EMCM-2045RICH-EMCM-2050RICH-EMCM-2060RICH-EMCM-2550RICH-EMCM-3060
Dimension
150x300150x350150x450200x400200x450200x500200x600250x500300x600
A150150150200200200200250300
Current
0.83A0.69A0.66A0.80A0.70A0.70A0.64A0.97A1.43A
Weight(kg)3439505967768792135
Pole Pitch
4(1+3)4(1+3)4(1+3)4(1+3)4(1+3)4(1+3)4(1+3)4(1+3)4(1+3)
Chucking SizeB
300350450400450500600500600
C228288378348378445545438529
D202020202020202020
Chuck Mounting Face
G146146146196196196196246296
E300350450400450500600500600
F202020202020202020
F110110110110110110110110110
Voltage
DC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90VDC 90V
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS43
Sine PlateRICH-SPA04 Sine Plate
Specifications:Material: S50C Hardness: HRC55⁰ - 57⁰Distance of Sine center: 50mm/4µ Adjusted Range: 0⁰ - 50⁰Parallelism is within 4µ
The sine plate can be set with punch former for swivelling mechanism. It makes work more efficient.
RICH-SPD Double Sine Plate
unit: mm
A
125100200
B
170150300
Model
RICH-SPD-1018RICH-SPD-1515RICH-SPD-1530
C
75100100
N.W.(kg)101324
D
100150150
E
108103108
F
175150300
Specifications:Range of Angle Adjustment: 0-60⁰ Accuracy of Center: within 0.005 mmParallel precision: 100 mm/0.003 mm
Two-way Sine Plate can be adjusted sin X-axis or Y-axis angle. The user can adjust to simultaneous angle for drilling, milling, grinding, and other precision angle.
MagneticTools
MILLIN
G
Demagnetizers
MACHINE TOOL ACCESSORIES SERIES 44
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-DHT Hand Type Demagnetizer
RICH-DPT Plate Type Demagnetizer
Indicator Stand / Magnetic Base
Specifications:Model: RTLM-5Holding Power: 80 kgsBase Length: 60 mmBase Width: 50 mmBase Height: 55 mmG.W. : 1.7 kgs
RICH-RTLM Machine light with Magnetic Base
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS45
Indicator Stand / Magnetic BaseRICH-RTUM Universal Arm Magnetic Base (Mechanical)RICH-
unit: mm
HoldingPower20kgs20kgs80kgs80kgs120kgs
Model
RICH RTUM-05RICH RTUM-05ARICH RTUM-04RICH RTUM-03RICH RTUM-60
ArmLength
185185285340340
G.W.(kg)0.50.41.41.52.2
L3535606085
Base Dimensions W3030505050
H3535555555
unit: mm
HoldingPower
100100100
Model
RICH RTUH-02RICH RTUH-04RICH RTUH-02B
ArmLength
310425310
G.W.(kg)1.92.02.0
L757575
Base Dimensions W505050
H555555
RICH-RTUH Universal Arm Magnetic Base (Hydraulic)
RICH-RB MB Magnetic Base
unit: mm
HoldingPower
8080808080
Model
RICH-RB MBRICH-RB MB1RICH-RB MB2RICH-RB-2RICH-RB-2V
G.W.(kg)1.01.11.11.61.7
L6060606060
Base Dimensions W5050505050
H5555555555
MeasuringTools
MeasuringTools
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS47
Sine Bar / Angle Plate / V-BlockRICH-SB Magnetic Sine Bar
unit: mm
A
75150
B
2234
Model
RICH-SB50RICH-SB100
C
3468
Weight(kg)0.31.9
D
50100
E
1734
RICH-SBM Sine Bar (Metric)
RICH-SBI Sine Bar (Inch)
unit: Inch
A
6 3/8”6 3/8”
B
1”2”
Model
RICH-SBI25RICH-SBI50
C
1 1/4”1 1/4”
Weight(kg)
11.9
D
5”5”
MILLIN
GLATH
EG
RIN
DIN
GM
AG
NETIC
MEA
SUR
ING
OTH
ERS
HO
T SALES
MeasuringTools
MACHINE TOOL ACCESSORIES SERIES 48
Angle Plates and Steel SquaresRICH-AP Adjustable Angle PlatesAdjustable Angle Plates
unit: mm
A
324747
B
253046
Model
RICH-AP1RICH-AP2RICH-AP3
C
75102102
Weight(kg)0.51.01.5
D
21.52929
Specifications:V-Shape Slot Precision within: 0.01 mm Adjustable Angle: 0⁰ - 60⁰
Fits for larger vise and for cushion angle processing. It can be used as a Pad perspective of mode scribing.
RICH-HSQ Hardened Steel Squares
unit: mm
A
100150200250300
B
70100130160200
Model
RICH-HSQ10RICH-HSQ15RICH-HSQ20RICH-HSQ25RICH-HSQ30
C
88101215
Weight(kg)0.20.40.71.11.7
D
2530354040
Specifications:Material: SKS3 Right Angle Precision: 0.004 mm/100mmHardness: HRC60⁰ ±2
Applicable to measure vertical and horizontal degree.
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS49
Gauge BlocksRICH-S High Speed Steel Gauge Blocks
Model
RICH-S870RICH-S871RICH-S872
RICH-S1030RICH-S1031RICH-S1032
RICH-S1120RICH-S1121RICH-S1122
Grade
012
012
012
BlockPer Set
878787
103103103
112112112
Sizes
1.001-1.009 (with 0.001 Step*9pcs)1.01-1.49 (with 0.01 Step*49pcs)
0.5-9.5 (with 0.5 Step*19pcs)10-100 (with 10 Step*10pcs)
1.005 (1pc)1.01-1.49 (with 0.01Step*49pcs)0.5-24.5( with 0.5 Steps*49pcs)
25-100 (with 25 Step*4 pcs)
1.0005 (1pc)1.001-1.009 (with 0.001 Step*9pcs)
1.01-1.49 (with 0.01 Step*49pcs)0.5-24.5 (with 0.5 Step*49pcs)
RICH-W Carbide Metric Gauge Blocks
Model
RICH-W870RICH-W871RICH-W872
RICH-W1030RICH-W1031RICH-W1032
RICH-W1120RICH-W1121RICH-W1122
Grade
012
012
012
BlockPer Set
878787
103103103
112112112
Sizes
1.001-1.009 (with 0.001 Step*9pcs)1.01-1.49 (with 0.01 Step*49pcs)
0.5-9.5 (with 0.5 Step*19pcs)10-100 (with 10 Step*10pcs)
1.005 (1pc)1.01-1.49 (with 0.01Step*49pcs)0.5-24.5( with 0.5 Steps*49pcs)
25-100 (with 25 Step*4 pcs)
1.0005 (1pc)1.001-1.009 (with 0.001 Step*9pcs)
1.01-1.49 (with 0.01 Step*49pcs)0.5-24.5 (with 0.5 Step*49pcs)25-100 (with 25 Steps*4pcs)
MeasuringTools
MILLIN
G
Edge Finder / Z Axial Preset Gauget
MACHINE TOOL ACCESSORIES SERIES 50
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-CZA Mechanical Edge Finder
unit: mm
Model
RICH-CZA610RICH-CZA420RICH-CZA1020
G.W.(kgs)0.040.040.07
O.D.
101010
FullLength
658883
LxWxH
95*26*2695*26*2695*26*26
RICH-CZB Ceramic Edge Finder
unit: mm
Model
RICH-CZB10RICH-CZB420RICH-CZB1020
FullLength
888885
O.D
101010
ProbeDiameterΦ10x6LΦ4x8L
Φ10x10L
RICH-CZC Height Presetter
unit: mm
Model
RICH-CZC50
G.W.(kgs)1.08
Height (mm)
50 +0.008-0
LxWxH
110*100*80
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS51
Surface PlatesRICH-SPCI Surface Plate (Cast Iron)
unit: mm
Model
RICH-SPCI2030RICH-SPCI3030RICH-SPCI3045RICH-SPCI4545RICH-SPCI5050RICH-SPCI6045RICH-SPCI6060RICH-SPCI6075RICH-SPCI6090RICH-SPCI9090RICH-SPCI90120RICH-SPCI100100RICH-SPCI100150RICH-SPCI100200
W
3003004504505004506007509009001200100015002000
L
200300300450500600600600600900900100010001000
H
60607585100100100110110125150135150170
RICH-SPG Surface Plate (Granite)unit: mm
Model
RICH-SPG1515RICH-SPG2030RICH-SPG3030RICH-SPG3045RICH-SPG4545RICH-SPG6045RICH-SPG6060RICH-SPG6075RICH-SPG6090RICH-SPG9090RICH-SPG90120RICH-SPG10075RICH-SPG100100RICH-SPG100150RICH-SPG100200
W
1503003004504504506007509009001200750100015002000
L
1502003003004506006006006009009001000100010001000
H
6060607575100100110130150150150150150200
Other MachineAccessoriesOther MachineAccessories
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS53
Other Machine AccessoriesRICH-U2 U2 Universal Cutter Grinder
Specifications:Max. Collect Capacity:Max. Grinding dia.:Taper angle:Relief angle:Negative angle:Grinding spindle:Cupe grinding wheel:Motor:Net weight:Machine dimensions:Packing dimensions:
18mm25mm0°~ 180°0°~ 45°0°~ 26°3600 r.p.m100 x 50 x 20 mm1/3 HP 220V 50/60Hz45 kgsL45 x W40 x H35 cmL55 x W45 x H47 cm
Specifications:Model No:Chamfering Capacity:Runnung Speed:Voltage:N.W.:G.W.:Shipment Size:
CMFMC-5000~3m/m3600 R.P.M.110 / 220 / 380V29 KGS32 KGS53 x 42 x 41cm
RICH-CMFMC Chamfering Machine (Face milling Cutter)
Other MachineAccessories
MILLIN
G
Other Machine Accessories
MACHINE TOOL ACCESSORIES SERIES 54
LATHE
GR
IND
ING
MA
GN
ETICM
EASU
RIN
GO
THER
SH
OT SA
LES
RICH-CMGW Chamfering Machine (Grinding Wheel)
Specifications:Model No:Chamfering Capacity:Running Speed:Voltage:N.W.:G.W.:Shipment Size:
CMGW-5000~3m/m3600 R.P.M.110 / 220 / 380V29 KGS32 KGS53 x 42 x 41cm
Specifications:Model No:Chamfering Capacity:Running Speed:Voltage:N.W.:G.W.:Shipment Size:
CMSC-5000~3m/m3600 R.P.M.110 / 220 / 380V28 KGS31 KGS53 x 42 x 41cm
RICH-CMSC Chamfering Machine (Side Cutter)
RICH-CMSW Chamfering Machine(Sanding Wheel)
Specifications:Model No:Chamfering Capacity:Running Speed:Voltage:N.W.:G.W.:Shipment Size:
CMSW-3200~1m/m3600 R.P.M.110 / 220 / 380V24 KGS27 KGS53 x 42 x 41cm
HOT SALEPRODUCTSHOT SALE PRODUCTS
ContentsCompressed Air Tools RICH-AGA (Air Grinder) RICH-AG (Air Grinder)
Drill Sharpener RICH-DSA (Drill Sharpener) RICH-DSB (Drill Sharpener)
Endmill Sharpener RICH-RSE413 (Endmill Sharpener) RICH-RSE1225 (Endmill Sharpener)
5656
5757
5858
MILLIN
GLATH
EG
RIN
DIN
GM
AG
NETIC
MEA
SUR
ING
OTH
ERS
HO
T SALES
Hot SaleProducts
MACHINE TOOL ACCESSORIES SERIES 56
Compressed Air ToolsRICH-AG500 Air Grinder
Specifications:Model:Description:Standard Collet Chuck:Optional Collet Chuck:Speed:Weight:Dimensions:Standard Accessories:
AG-500Precision TypeØ 3.0Ø 2.34 / Ø 3.17560,000 rpm180gØ 17.5 x 142L (mm)
RICH-AG700 Air Grinder
Specifications:Model:Description:
Collet Chuck:Speed:Weight:Dimensions:Standard Accessories:
AG - 700Standard Type120⁰ angle surface grinderM7 Screw Shaft22,000 rpm / 90 psi200gØ 16.5 x 136L (mm)
MIL
LIN
GLA
THE
GR
IND
ING
MA
GN
ETIC
MEA
SUR
ING
OTH
ERS
HO
T SA
LES
RICH TOOLS57
Drill Sharpener
RICH-RSD320 Drill Sharpener
Specifications:Model:Dimension:Weight:Capacity:Tool Applicable:Motor Speed:Power Supply:Diamond Wheel:
Standard Accessories:
RSD-32026cm x 16cm x 16cm8KgØ3 - Ø20 mmTwist Drill5,000 rpm ± 300 rpm110V - 220VCBN / HHSSD / Carbide- ER 25 Collet Ø14 - Ø20- ER- 0 Collet Ø2 - Ø13- ER 25 Upper and Bottom nut - Extension Drill Holder X2- Allen Key X2- Power Cord X1
RICH-RSD213 Drill Sharpener
Specifications:Model:Dimension:Weight:Capacity:Tool Applicable:Motor Speed:Power Supply:Diamond Wheel:
Standard Accessories:
RSD-21326cm x 16cm x 16cm8KgØ2 - Ø13 mmTwist Drill5,000 rpm ± 300 rpm110V - 220VCBN / HHSSD / Carbide- ER 20 ColletØ2 -Ø13- Extension Drill Holder X2- Allen Key X2- Power Cord X1
MILLIN
GLATH
EG
RIN
DIN
GM
AG
NETIC
MEA
SUR
ING
OTH
ERS
HO
T SALES
Hot SaleProducts
MACHINE TOOL ACCESSORIES SERIES 58
Endmill SharpenerRICH-RSE413 Endmill Sharpener
Specifications:Model:Dimension:Weight:Capacity:Tool Applicable:Motor Speed:Power Supply:Diamond Wheel:
Standard Accessories:
RSE-41331cm x 26cm x 29cm17KgØ4 - Ø13 mm2/3/4 Flute6,000 rpm ± 300 rpmAC 110V - 220V 50/60HZCBN / HHSSD / Carbide- ER Collet Ø4 -Ø13 (10 pcs)- ER Chuck: 2/4FluteX1 3FluteX1- Cable X1- Fuse X2- Key Wrench X1- Diamond Wheel X1
RICH-RSE1225 Endmill Sharpener
Specifications:Model:Dimension:Weight:Capacity:Tool Applicable:Motor Speed:Power Supply:Diamond Wheel:
Standard Accessories:
RSE-122536cm x 29cm x 34cm30KgØ12 - Ø25 mm2/3/4 Flute4,500 rpm ± 300 rpmAC 110V - 220V 50/60HZCBN / HHSSD / Carbide- ER Collet Ø12,16,18,20,22,25 (6pcs)- ER Chuck: 2/4FluteX1 3FluteX1- Cable X1- Fuse X2- Key Wrench X1- Diamond Wheel X1
Copyright © October 2018
2nd Floor, Bldg. 4 No. 124 North Science Avenue,Laguna Tenchopark SEPZ, Biñan City, Laguna
(049) 572 3717 | (049) 545 [email protected]
[email protected]: ts-machinetools.comfacebook: @TSMachinetools
TEN SOONUsers’ Experience is our Priority