TY-FLO® Needle Valves
TestingTylok TY-FLO® Needle Valves are 100% Helium leak tested to
1 x 10-4 ml/s ensuring performance and reliability.
1 Hex Bar Stock and 1/2” Angle Valves only
Materials of Construction
1 For pressure ratings of valves with tube fitting end connections, see CBC-Lok® or CS-Lok® catalogs.2 Temperature ratings based on working temperature of standard stem seals.
See o-ring/packing options for temperature ratings of optional stem seals and soft seat valve.
TylokTy-Flo® Needle Valves
Design/Features
# Component 316 SS Brass Steel1a Mini “T” Handle 316 SS N/A Steel1b “T” Handle 316 SS N/A Steel1c Round Knurled Handle 316 SS Brass Steel1d 1-3/8” Plastic Handle Phenolic1e 1-3/4” Plastic Handle Phenolic2 Set Screw 316 SS Steel3 Dust Cap1 Vinyl4 Valve Bonnet 316 SS Brass Steel
5 Valve Stem Chrome-plated 316 SS 316 SS
6 Bonnet Lock Pin1 316 SS N/A Steel7 Stem Back-up Ring Teflon®
8 Stem O-Ring Viton®
9 Valve Body 316 SS Brass Steel
SpeCifiCationS 316 Stainless Brass SteelHard Seat Soft Seat Hard Seat Soft Seat Hard Seat Soft Seat
Pressure Rating1
psig (bar)10,000 (689)
6,000 (413)
6,000(413)
3,000(206)
10,000(689)
6,000(413)
Temperature Rating2 °F (°C)
-10 to 200 (12 to 93)
-10 to 200 (12 to 93)
-10 to 200 (12 to 93)
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
• Hard (Vee) or Delrin® Soft Seat/Tip
• Orifice sizes from 0.172 to 0.438 in.
• Flow Coefficients (CV) from 0.42 to 2.70
• Straight or angle flow patterns
• Optional panel mount
• Handle options available
• Non-wetted stem threads
1a
1b
1c
1d
1e
9
78
2
2
2
2
2
3
4
5
6
2
F
A
F
G
openE
C
B
openJ
H2
H1
D
Straight pattern Angle pattern
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Valve Dimension Table
CBC-Lok® double ferrule tube ends are completely interchangeable with Swagelok® and Parker A-Lok® tube ends.
CS-Lok® single ferrule tube ends are completely interchangeable with Parker CPI® tube ends.
end ConnectionsBasic part
numberorifice
in. (mm)
CV Hard Seat
(Soft Seat/tip)
Dimensions, in. (mm)
inlet/outlet Size, in. a B C D e f G H1 H2 J
CBC-Lok®
tube fittings
1/4 4-6DD-4 0.172(4.4)
0.42(0.42)
2.46 (62.5)
1.23(31.2)
0.33(8.4) 3/4”
SQ
2.17(55.1) 1.81
(46)
- - - -
3/8 6-6DD-6 3.08(78.2)
1.54(39.1)
0.37(9.4)
2.13(54.1) - - - -
1/2 8-6DD-8 0.187(4.8) 0.44 3.30
(83.8)1.65
(41.9)0.63(16)
1-1/4” HEX
3.16(80.3)
2.50(63.5) - - - -
CS-Lok® tube fittings
1/4 4-6SS-4 0.172(4.4)
0.42(0.42)
2.46(62.5)
1.23(31.2)
0.33(8.4) 3/4”
SQ
2.17(55.1) 1.81
(46)
- - - -
3/8 6-6SS-6 3.08(78.2)
1.54(39.1)
0.37(9.4)
2.13(54.1) - - - -
1/2 8-6SS-8 0.187(4.8) 0.44 3.30
(83.8)1.65
(41.9)0.63(16)
1-1/4” HEX
3.16(80.3)
2.50(63.5) - - - -
femalenpt
1/8 2-6FF-2 0.172(4.4)
0.42(0.42)
1.81(46)
0.91(23)
0.38(9.7)
3/4”SQ
2.09(53.1)
1.81(46)
1.25(31.8)
0.88(22.4)
0.88(22.4) 2.09
(53.1)1/4 4-6FF-4 1.50(38.1)
1.13(28.7)
1.13(28.7)
3/8 6-6FF-6 0.187(4.8)
0.44(0.76)
2.50(63.5)
1.25(31.7)
0.63(16)
1-1/4” HEX
3.16(80.3)
2.50(63.5)
- - - -
1/2 8-6FF-8 2.00(50.8)
1.38(35.1)
1.38(35.1)
3.66(93)
3/4 12-6FF-12
0.438(11.1) 2.70 4.25
(108)2.13(54)
1.25(31.8)
2-1/2” HEX
4.25(108)
4.25(108)
- - - -
1 16-6FF-16 - - - -
1-1/4 20-6FF-20 - - - -
1-1/2 24-6FF-24 - - - -
Male npt
1/8 2-6MM-2 0.172(4.4)
0.42(0.42)
1.81(46)
0.91(23)
0.38(9.7)
3/4”SQ
2.09(53.1)
1.81(46)
1.25(31.8)
0.88(22.4)
0.72(18.3) 2.09
(53.1)1/4 4-6MM-4 1.50(38.1)
1.13(28.7)
0.88(22.4)
Male/female npt
1/8 2-6MF-2 0.172(4.4)
0.42(0.42)
1.81(46)
0.91(23)
0.38(9.7)
3/4”SQ
2.09(53.1)
1.81(46)
1.25(31.8)
0.88(22.4)
0.72(18.3) 2.09
(53.1)1/4 4-6MF-4 1.50(50.8)
1.13(28.7)
0.88(22.4)
1/2 8-6MF-8 0.187(4.8)
0.44(0.76)
3.50(88.9)
1.25(31.8)
0.63(16)
1-1/4” HEX
3.16(80.3)
2.50(63.5)
2.00(50.8)
1.38(35.1)
1.38(35.1)
3.66(93)
3/4 12-6MF-12
0.438(11.1) 2.70 5.25
(133.4)2.13(54)
1.25(31.8)
2-1/2” HEX
4.25(108)
4.25(108)
- - - -
1 16-6MF-16 - - - -
1-1/4 20-6MF-20 - - - -
1-1/2 24-6MF-24 - - - -
Dimensions shown with tube fitting ends finger-tight and standard configurations. Dimensions subject to change.
TylokTy-Flo® Needle Valves
3
PANEL3/16 MAX
1/21-1/32
15/16 HEX NUT.16 THICK
5/8-18 THREAD
Dimensions For :Hex Bar Stock1/2" Angle Valves
PANEL1/8 MAX
7/167/8
15/16 HEX NUT.16 THICK
5/8-18 THREAD
Dimensions For :Square Bar Stock1/4" and Smaller
Angle Valves
1-13/16"
1/4"H1
4-1/4" (3/4" & Up Valves)2-1/2"
1/4"H2
1" RD
3/8"
5/32"H3
1-3/4"
1-1/16"
1/4"H5
1-3/8"
27/32"
1/4"H4
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Panel Mount Details
Handle options
The handle material will always match the valve body, unless otherwise specified.
Standard Handles 316 SS Brass SteelSquare Bar Stock and 1/4” and Smaller Angle Valves H1 H3 H1
Hex Bar Stock and 1/2” Angle Valves H2 N/A H2
TylokTy-Flo® Needle Valves
4
o-Ring/Packing optionsTemperature Ratings:
• -10°F to 200°F with Viton® O-Ring
• -65°F to 150°F with EPDM O-Ring
• -13°F to 300°F with Kalrez® O-Ring
• -65°F to 250°F with Teflon® Packing
• -20°F to 400°F with Grafoil® Packing
• 200°F max with Soft Seat/Tip Valves
Flow Data at 100°F (37°C)
Packing style detail shown above
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0 1 2 3 4 5 6
# Turns Open
Flo
w C
oe
ffic
ient
(C
v)
Orifice (0.172) Hard and Soft Seat
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
0 1 2 3 4 5 6
# Turns OpenFl
ow
Co
effi
cie
nt (
Cv)
Orifice (0.187) Hard Seat
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 1 2 3 4 5
# Turns Open
Flo
w C
oe
ffic
ient
(C
v)
Orifice (0.187) Soft Seat
0
0.5
1
1.5
2
2.5
3
0 1 2 3 4 5 6 7 8 9
# Turns Open
Flo
w C
oe
ffic
ient
(C
v)
Orifice (0.438) Hard Seat
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
TylokTy-Flo® Needle Valves
5
Chart 3 - Style H1 Mini “T” HandleH2 “T” HandleH3 Round Knurled HandleH4 1-3/8” Phenolic HandleH5 1-3/4” Phenolic Handle
*See handle options section for standard handles
Chart 7 - Handle options
Chart 5 - options
A Angle PatternL Delrin® Soft Stem/Seat
P1 Panel Mount (1 nut)P2 Panel Mount (2 nuts)
Example: SS-6-6DD-6-P2-T
Designates a Stainless Steel needle valve, with a 3/8” CBC-Lok® tube fitting inlet to a 3/8” CBC-Lok® tube fitting outlet with a 2 nut panel mount option and optional Teflon® packing.
Example:B-4-6FF-4-A
Designates a Brass angle needle valve with a 1/4” female NPT inlet to a 1/4” female NPT outlet.
Ty-Flo® needle valves are ordered as listed in this catalog by inserting the material code before the part number.Special configurations available upon request.
Example: A stainless steel needle valve with 1/2” CBC-Lok® tube fitting inlet to 1/2” CBC-Lok® tube fitting outlet with 2 nut panel mount option, Grafoil® packing and 1-3/4” phenolic handle is designated as follows.
1061 East 260th Street • Euclid, Ohio 44132Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317
[email protected] • www.tylok.com
Doc. 72304 Rev. A
SS - 8 - 6 DD - 8 p2 - G - H5↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
Material Inlet Size Style Inlet/Outlet Outlet Size Options Seal HandleChart 1 Chart 2 Chart 3 Chart 4 Chart 2 Chart 5 Chart 6 Chart 7
Chart 1 - Material
SS Stainless SteelB BrassS Steel
Chart 2 - Valve Size
Designator port Size2 1/8”4 1/4”6 3/8”8 1/2”
12 3/4”16 1”20 1-1/4”24 1-1/2”
Chart 6 - Stem Seal
(Viton O-Ring Standard)EM1 EPDM 80 O-RingKZ1 Kalrez® 3018 O-RingG Grafoil® PackingT Teflon® Packing
6 Needle Valve
Chart 4 - Inlet/outlet Port
Designator inlet outletDD CBC-Lok® Tube Fitting CBC-Lok® Tube FittingSS CS-Lok® Tube Fitting CS-Lok® Tube FittingMM Male NPT Male NPTFF Female NPT Female NPTMF Male NPT Female NPT
REGISTRATIONS& TYPE APPROVALS
iSo 9001:2000Certificate # 012106
HoW To oRDERHow to order Ty-Flo® Needle Valves
-
TYLOK PIPE FITTINGS
1061 East 260th Street • Euclid, Ohio 44132 • (216) 261-7310 • 1-800-321-0466www.tylok.com • email: [email protected]
0
CO
MPA
NY
HIS
TOR
YH
OW
TO
ORD
ER
MATERIAL ABBREVIATIONS AND SPECIFICATIONSTylok Instrumentation Pipe Fittings are available in the following materials:
A - Aluminum S - Steel B - Brass SS - Stainless SteelPipe Catalog Raw materials Specifications:
Brass Forgings ASTM-B124 Alloy 377Brass Bar Stock ASTM-B16 Alloy 360, ASTM-B453 Alloy 345Stainless Steel Forging ASME-SA182, ASTM-A182Stainless Steel Bar Stock ASME-SA479, ASTM-A276Steel Bar Stock ASTM-A108
The above materials are considered standard materials of construction. Tylok can supply instru-mentation pipe fittings in other materials including Hastelloy C, Monel, Inconel and Titanium.Contact your local Tylok distributor for additional information.
QUALITY MANAGEMENT SYSTEMQMI has registered Tylok International’s Quality ManagementSystem to ISO 9001:2000. The quality system complies with theinternational standard ISO 9001:2000 and its technical equivalent,ANSI/ISO/ASQ Q9001:2000. Tylok strives to continuouslyimprove the effectiveness of the Quality Management System byeach member within the organization.
STYLE1 – STRAIGHT2 – ELBOW3 – TEE4 – CROSS
STANDARD NATION PIPE THREADSIZE 1 1/16-27 NPT SIZE 6 3/8 -18 NPTSIZE 2 1/8 -27 NPT SIZE 8 1/2 -14 NPTSIZE 4 1/4 -18 NPT SIZE 12 3/4 -14 NPT
SIZE 16 1.0-11 1/2 NPT
MATERIAL CODES-STEELSS-STAINLESS STEELB-BRASSM-MONELA-ALUMINUM
PIPE SIZE
FITTING DESCRIPTION
PIPE SIZE
SS-6-1RAFM-1
Cullen Crawford introduced the first flareless fitting in the mid 1940’s. Well known throughoutthe fitting industry, Mr. Crawford founded Tylok International, Inc., in the late 1950’s. Tylok’sproduct line has been used in applications for automotive, petrochemical, paper/pulp, navaland semi-conductor industries.
This catalog features our pipe fittings as well as general information on how to order. Pleasecall your local Distributor or Tylok International, Inc., if you need further assistance.
Tylok Pipe Fittings are ordered as listed in this catalog by inserting the material code before thepart number. Tylok Pipe Fittings can be identified through the part number as to material, pipesize, configuration and thread connection. The part number describes a complete fitting. Thesize nomenclature to describe a tee fitting is from left (1) to right (2) and down (3). Specialconfigurations available upon request.
1 2
3
ISO 9001:2000Certificate No.012106
1
TABLE OF C
ON
TENTS
/PROD
UC
T LOC
ATOR
TYLOK Precision Instrument Pipe Fittings
1HLNHex Long
Nipple
3
1FPUFemale Pipe
Union
3
1FPRUFemale Pipe
Reducer Union
3
1FMAFemale To Male
Adapter
2
1RAFMReducer Adapter –
Female To Male
5
1RBMFReducer Bushing –
Male To Female
5
1FPCFemale Pipe
Cap
2
1MPPMale Pipe
Plug
5
1MPHCMale Pipe
Hose Connector
4
1FPHCFemale Pipe
Hose Connector
2
3FMFPipe Tee – Female-
Male-Female
8
4FPCRFemale Pipe
Cross
8
2MMMale Pipe
Elbow
7
2FFFemale Pipe
Elbow
6
2FMFemale – Male
Pipe Elbow
6
2FMRFemale – Male
Reducer Pipe Elbow
6
3MMMAll Male Pipe Tee
8
3FFFAll Female Pipe Tee
7
Technical Information
9
TEC
HN
ICA
LIN
FORM
ATIO
N
1HNHex Nipple
4
1HRNHex Reducing
Nipple
4
3FFMPipe Tee – Female-
Female-Male
7
*NOTE: All dimensions subject to change, to be used for reference only.2
1FM
A1F
PC1F
PHC
FEMALE TO MALEADAPTER PA
RT N
O.
FEM
ALE
PIPE
SI
ZE A B TH
RU-H
OLE
C-H
EX
1-1FMA 1/16 1/16 1.000 .125 7/162-1FMA 1/8 1/8 1.062 .187 9/164-1FMA 1/4 1/4 1.375 .281 3/46-1FMA 3/8 3/8 1.562 .375 7/88-1FMA 1/2 1/2 1.906 .468 1-1/16
12-1FMA 3/4 3/4 1.937 .625 1-1/416-1FMA 1 1 2.281 .875 1-5/8
MAL
E PI
PE
SIZE
PART
NO
.
PIPE
TH
READ
SIZE
A B-H
EX
1-1FPC 1/16 .500 7/162-1FPC 1/8 .750 9/164-1FPC 1/4 .906 3/46-1FPC 3/8 1.031 7/88-1FPC 1/2 1.343 1-1/16
12-1FPC 3/4 1.437 1-1/416-1FPC 1 1.625 1-5/8
FEMALE PIPE CAP
PART
NO
.
FEM
ALE
PIPE
SI
ZE A B TH
RU-H
OLE
C-H
EX
HO
SE I.
D.
DFEMALE PIPE HOSECONNECTOR
2-1FPHC-2 1/8 1/8 1.187 .093 9/16 .4222-1FPHC-3 1/8 3/16 1.344 .125 9/16 .5902-1FPHC-4 1/8 1/4 1.500 .187 9/16 .7904-1FPHC-2 1/4 1/8 1.312 .093 3/4 .4224-1FPHC-3 1/4 3/16 1.465 .125 3/4 .5904-1FPHC-4 1/4 1/4 1.687 .187 3/4 .7904-1FPHC-6 1/4 3/8 1.781 .281 3/4 .8904-1FPHC-8 1/4 1/2 1.781 .406 3/4 .8906-1FPHC-4 3/8 1/4 1.718 .187 7/8 .7906-1FPHC-6 3/8 3/8 1.812 .281 7/8 .8906-1FPHC-8 3/8 1/2 1.812 .406 7/8 .8908-1FPHC-6 1/2 3/8 2.125 .281 1-1/16 .8908-1FPHC-8 1/2 1/2 2.078 .406 1-1/16 .8908-1FPHC-12 1/2 3/4 2.125 .656 1-1/16 .890
12-1FPHC-8 3/4 1/2 2.187 .406 1-1/4 .89012-1FPHC-12 3/4 3/4 2.187 .656 1-1/4 .89016-1FPHC-16 1 1 2.312 .906 1-5/8 .890
ABTHRU-HOLE
C-HEX
MALE PIPE SIZE
FEMALE PIPE SIZE
A
B-HEX
PIPETHREADSIZE
D
HOSE I.D.
C-HEX
BTHRUHOLE
FEMALE PIPE SIZE
A
*NOTE: All dimensions subject to change, to be used for reference only.3
1FPRU1FPU
HEX LONG NIPPLEPA
RT N
O.
MAL
E PI
PE S
IZE
A B TH
RU-H
OLE
C-H
EX
1-1HLN-★ 1/16 .125 3/82-1HLN-★ 1/8 .187 7/164-1HLN-★ 1/4 .281 9/166-1HLN-★ 3/8 .375 11/168-1HLN-★ 1/2 .468 7/8
12-1HLN-★ 3/4 .625 1-1/1616-1HLN-★ 1 .875 1-3/8
★ Made To OrderSpecify
Size
1HLN
1-1FPU 1/16 .812 .234 7/162-1FPU 1/8 .812 .328 9/164-1FPU 1/4 1.187 .421 3/46-1FPU 3/8 1.312 .562 7/88-1FPU 1/2 1.625 .687 1-1/16
12-1FPU 3/4 1.687 .890 1-1/416-1FPU 1 2.000 1.125 1-5/8
PART
NO
.
FEM
ALE
PIPE
SIZE A B TH
RU-H
OLE
C-H
EX FEMALE PIPEUNION
FEMALE PIPE REDUCER UNIONPA
RT N
O.
FEM
ALE
PIPE
SI
ZE A B TH
RU-H
OLE
C-H
EX
2-1FPRU-1 1/8 1/16 1.062 .234 9/164-1FPRU-1 1/4 1/16 1.218 .234 3/44-1FPRU-2 1/4 1/8 1.218 .328 3/46-1FPRU-1 3/8 1/16 1.312 .234 7/86-1FPRU-2 3/8 1/8 1.312 .328 7/86-1FPRU-4 3/8 1/4 1.375 .421 7/88-1FPRU-2 1/2 1/8 1.562 .328 1-1/168-1FPRU-4 1/2 1/4 1.750 .421 1-1/168-1FPRU-6 1/2 3/8 1.781 .562 1-1/16
12-1FPRU-2 3/4 1/8 1.718 .328 1-1/412-1FPRU-4 3/4 1/4 1.812 .421 1-1/412-1FPRU-6 3/4 3/8 1.843 .562 1-1/412-1FPRU-8 3/4 1/2 2.062 .687 1-1/416-1FPRU-2 1 1/8 1.843 .328 1-5/816-1FPRU-4 1 1/4 2.000 .421 1-5/816-1FPRU-6 1 3/8 2.062 .562 1-5/816-1FPRU-8 1 1/2 2.187 .687 1-5/816-1FPRU-12 1 3/4 2.250 .890 1-5/8
RED
UCED
FEM
ALE
PIPE
SIZ
E
A
BTHRU-HOLE
C-HEX
FEMALE PIPE SIZE
BTHRU-HOLE
A
C-HEXMALE PIPE SIZE
BTHRU-HOLE
A
C-HEX
FEMALE PIPE SIZE
REDUCED FEMALE PIPE SIZE
*NOTE: All dimensions subject to change, to be used for reference only.4
1HN
1HRN
1MPH
C
MALE PIPE HOSECONNECTOR PA
RT N
O.
MAL
E PI
PE
SIZE A B TH
RU-H
OLE
C-H
EX
HO
SE I.
D.
D
BTHRU-HOLE
MALE PIPE SIZE
A
C-HEX
HOSE I.D.
2-1MPHC-2 1/8 1/8 1.062 .093 7/16 .4222-1MPHC-3 1/8 3/16 1.187 .125 7/16 .5902-1MPHC-4 1/8 1/4 1.462 .187 7/16 .7904-1MPHC-2 1/4 1/8 1.234 .093 9/16 .4224-1MPHC-3 1/4 3/16 1.406 .125 9/16 .5904-1MPHC-4 1/4 1/4 1.609 .187 9/16 .7904-1MPHC-6 1/4 3/8 1.718 .281 9/16 .8904-1MPHC-8 1/4 1/2 1.718 .281 9/16 .8906-1MPHC-4 3/8 1/4 1.609 .187 11/16 .7906-1MPHC-6 3/8 3/8 1.781 .281 11/16 .8906-1MPHC-8 3/8 1/2 1.781 .375 11/16 .8908-1MPHC-6 1/2 3/8 1.953 .281 7/8 .8908-1MPHC-8 1/2 1/2 1.953 .406 7/8 .8908-1MPHC-12 1/2 3/4 1.968 .468 7/8 .890
12-1MPHC-8 3/4 1/2 1.968 .406 1-1/16 .89012-1MPHC-12 3/4 3/4 1.968 .625 1-1/16 .89016-1MPHC-16 1 1 2.171 .875 1-3/8 .890
D
1-1HN 1/16 .937 .125 3/82-1HN 1/8 1.000 .187 7/164-1HN 1/4 1.375 .281 9/166-1HN 3/8 1.406 .375 11/168-1HN 1/2 1.781 .468 7/8
12-1HN 3/4 1.812 .625 1-1/1616-1HN 1 2.281 .875 1-3/8
PART
NO
.
MAL
E PI
PE
SIZE
A B TH
RU-H
OLE
C-H
EX
HEX NIPPLE
HEX REDUCING NIPPLE PA
RT N
O.
MAL
E PI
PE
SIZE A B TH
RU-H
OLE
C-H
EX
2-1HRN-1 1/8 1/16 1.000 .125 7/164-1HRN-1 1/4 1/16 1.187 .125 9/164-1HRN-2 1/4 1/8 1.187 .187 9/166-1HRN-1 3/8 1/16 1.218 .125 11/166-1HRN-2 3/8 1/8 1.218 .187 11/166-1HRN-4 3/8 1/4 1.406 .281 11/168-1HRN-2 1/2 1/8 1.406 .187 7/88-1HRN-4 1/2 1/4 1.593 .281 7/88-1HRN-6 1/2 3/8 1.625 .375 7/8
12-1HRN-2 3/4 1/8 1.437 .187 1-1/1612-1HRN-4 3/4 1/4 1.625 .281 1-1/1612-1HRN-6 3/4 3/8 1.625 .375 1-1/1612-1HRN-8 3/4 1/2 1.812 .468 1-1/1616-1HRN-2 1 1/8 1.718 .187 1-3/816-1HRN-4 1 1/4 1.906 .281 1-3/816-1HRN-6 1 3/8 1.906 .375 1-3/816-1HRN-8 1 1/2 2.093 .468 1-3/816-1HRN-12 1 3/4 2.093 .625 1-3/8
RED
UCED
MAL
E
PIPE
SIZ
E
BTHRU-HOLE
A
C-HEX
REDUCED MALEPIPE SIZE
MALE PIPE SIZE
BTHRU-HOLE
A
C-HEX
MALE PIPE SIZE
*NOTE: All dimensions subject to change, to be used for reference only.
PART
NO
.
PIPE
TH
READ
A B-H
EX
1-1MPP 1/16 .750 3/82-1MPP 1/8 .750 7/164-1MPP 1/4 1.000 9/166-1MPP 3/8 1.062 11/168-1MPP 1/2 1.312 7/8
12-1MPP 3/4 1.375 1-1/1616-1MPP 1 1.687 1-3/8
PART
NO
.
FEM
ALE
PIPE
SI
ZE A B TH
RU-H
OLE
C-H
EX
2-1RAFM-1 1/8 1/16 1.093 .125 9/164-1RAFM-1 1/4 1/16 1.250 .125 3/44-1RAFM-2 1/4 1/8 1.250 .187 3/46-1RAFM-1 3/8 1/16 1.437 .125 7/86-1RAFM-2 3/8 1/8 1.437 .187 7/86-1RAFM-4 3/8 1/4 1.562 .281 7/88-1RAFM-2 1/2 1/8 1.687 .187 1-1/168-1RAFM-4 1/2 1/4 1.812 .281 1-1/168-1RAFM-6 1/2 3/8 1.812 .375 1-1/16
12-1RAFM-2 3/4 1/8 1.812 .187 1-1/412-1RAFM-4 3/4 1/4 1.968 .281 1-1/412-1RAFM-6 3/4 3/8 1.968 .375 1-1/412-1RAFM-8 3/4 1/2 2.062 .468 1-1/416-1RAFM-2 1 1/8 2.000 .187 1-5/816-1RAFM-4 1 1/4 2.125 .281 1-5/816-1RAFM-6 1 3/8 2.125 .375 1-5/816-1RAFM-8 1 1/2 2.250 .468 1-5/816-1RAFM-12 1 3/4 2.250 .625 1-5/8
RED
UCED
MAL
E
PIPE
SIZ
E
5
1MPP
1RAFM1RBM
F
REDUCER ADAPTER -FEMALE TO MALE
REDUCER BUSHING -MALE TO FEMALE
MALE PIPEPLUG
PART
NO
.
MAL
E PI
PE
SIZE A B TH
RU-H
OLE
C-H
EX
2-1RBMF-1 1/8 1/16 1.000 .187 7/164-1RBMF-1 1/4 1/16 .812 .234 9/164-1RBMF-2 1/4 1/8 1.000 .281 9/166-1RBMF-1 3/8 1/16 .843 .234 11/166-1RBMF-2 3/8 1/8 .843 .328 11/166-1RBMF-4 3/8 1/4 1.125 .375 3/48-1RBMF-2 1/2 1/8 1.062 .328 7/88-1RBMF-4 1/2 1/4 1.062 .421 7/88-1RBMF-6 1/2 3/8 1.312 .468 7/8
12-1RBMF-2 3/4 1/8 1.062 .328 1-1/1612-1RBMF-4 3/4 1/4 1.062 .421 1-1/1612-1RBMF-6 3/4 3/8 1.062 .562 1-1/1612-1RBMF-8 3/4 1/2 1.562 .625 1-1/1616-1RBMF-2 1 1/8 1.343 .328 1-3/816-1RBMF-4 1 1/4 1.343 .421 1-3/816-1RBMF-6 1 3/8 1.343 .562 1-3/816-1RBMF-8 1 1/2 1.343 .687 1-3/816-1RBMF-12 1 3/4 1.750 .875 1-3/8
RED
UCED
FEM
ALE
PIPE
SIZ
E
ABTHRU-HOLE
C-HEX
REDUCED MALEPIPE SIZE
FEMALE PIPE SIZE
A
B-HEXPIPETHREAD
SIZE
A
BTHRU-HOLE
C-HEX
MALE PIPE SIZE
REDUCEDFEMALE PIPE SIZE
*NOTE: All dimensions subject to change, to be used for reference only.
1-2FM-1 1/16 .750 .718 .1252-2FM-2 1/8 .843 .843 .1874-2FM-4 1/4 .843 1.093 .2816-2FM-6 3/8 1.000 1.125 .3758-2FM-8 1/2 1.125 1.375 .468
12-2FM-12 3/4 1.437 1.500 .62516-2FM-16 1 1.625 1.937 .875
PART
NO
.
PIPE
SIZ
ES
A B C TH
RU-H
OLE
PART
NO
.
FEM
ALE
PIPE
SIZE
A B TH
RU-H
OLE
1-2FF-1 1/16 .750 .2342-2FF-2 1/8 .843 .3284-2FF-4 1/4 .968 .4216-2FF-6 3/8 1.000 .5628-2FF-8 1/2 1.125 .687
12-2FF-12 3/4 1.437 .89016-2FF-16 1 1.625 1.125
6
2FF
2FM
2FM
R
FEMALE PIPEELBOW
FEMALE - MALEPIPE ELBOW
A
A
BTHRU-HOLE
FEMALE PIPE SIZE
B
A
CTHRU-HOLE
MALE PIPE SIZE
FEMALE PIPE SIZE
FEMALE - MALEREDUCER PIPE ELBOW PA
RT N
O.
FEM
ALE
PIPE
SI
ZE
A B C TH
RU-H
OLE
2-2FMR-1 1/8 1/16 .750 .750 .1254-2FMR-1 1/4 1/16 .843 .937 .1254-2FMR-2 1/4 1/8 .843 .937 .1876-2FMR-1 3/8 1/16 1.000 .937 .1256-2FMR-2 3/8 1/8 1.000 .937 .1876-2FMR-4 3/8 1/4 1.125 1.187 .2818-2FMR-2 1/2 1/8 1.125 1.062 .1878-2FMR-4 1/2 1/4 1.125 1.250 .2818-2FMR-6 1/2 3/8 1.125 1.250 .375
12-2FMR-2 3/4 1/8 1.437 1.250 .18712-2FMR-4 3/4 1/4 1.437 1.375 .28112-2FMR-6 3/4 3/8 1.437 1.437 .37512-2FMR-8 3/4 1/2 1.437 1.625 .46816-2FMR-2 1 1/8 1.625 1.375 .18716-2FMR-4 1 1/4 1.625 1.625 .28116-2FMR-6 1 3/8 1.625 1.625 .37516-2FMR-8 1 1/2 1.625 1.812 .46816-2FMR-12 1 3/4 1.625 1.875 .625
MAL
E PI
PE
SIZE
FEMALE PIPE
A
B
CTHRU-HOLE
MALE PIPESIZE
*NOTE: All dimensions subject to change, to be used for reference only.
PART
NO
.
MAL
E PI
PESI
ZE A B TH
RU-H
OLE
1-2MM-1 1/16 .718 .1252-2MM-2 1/8 .750 .1874-2MM-4 1/4 1.000 .2816-2MM-6 3/8 1.093 .3758-2MM-8 1/2 1.375 .468
12-2MM-12 3/4 1.500 .62516-2MM-16 1 1.875 .875
7
2MM
3FFF3FFM
MALE PIPEELBOW
1-3FFF-1 1/16 1.500 .750 .2342-3FFF-2 1/8 1.687 .843 .3284-3FFF-4 1/4 1.687 .843 .4216-3FFF-6 3/8 2.000 1.000 .5628-3FFF-8 1/2 2.250 1.125 .687
12-3FFF-12 3/4 2.625 1.312 .89016-3FFF-16 1 3.250 1.625 1.125
PART
NO
.
FEM
ALE
PIPE
SIZE A B C TH
RU-H
OLE
ALL FEMALE PIPE TEE
A
A
BTHRU-HOLE MALE
PIPE SIZE
ABB
B
CTHRU-HOLE
FEMALE PIPE SIZE
1-3FFM-1 1/16 1.500 .750 .718 .1252-3FFM-2 1/8 1.687 .843 .843 .1874-3FFM-4 1/4 1.875 .937 1.000 .2816-3FFM-6 3/8 2.000 1.000 1.125 .3758-3FFM-8 1/2 2.250 1.125 1.375 .468
12-3FFM-12 3/4 2.750 1.375 1.625 .62516-3FFM-16 1 3.250 1.625 1.937 .875
PIPE TEE - FEMALE-FEMALE-MALEPA
RT N
O.
PIPE
SIZ
ES
B C D T
HRU
-HO
LE
A
A
C
B B
DTHRU-HOLE
MALEPIPE SIZE
FEMALE PIPE SIZE
*NOTE: All dimensions subject to change, to be used for reference only.
PART
NO
.
PIPE
SIZ
ES
B C D T
HRU
-HO
LE
1-3FMF-1 1/16 1.500 .750 .750 .1252-3FMF-2 1/8 1.687 .843 .843 .1874-3FMF-4 1/4 1.890 .843 1.046 .2816-3FMF-6 3/8 2.125 1.000 1.125 .3758-3FMF-8 1/2 2.500 1.125 1.375 .468
12-3FMF-12 3/4 2.937 1.437 1.500 .62516-3FMF-16 1 3.562 1.625 1.937 .875
A
8
3FM
F3M
MM
4FPC
R
PIPE TEE - FEMALE-MALE-FEMALE
FEMALE PIPECROSS
1-4FPCR 1/16 1.250 .625 .2462-4FPCR 1/8 1.687 .843 .3284-4FPCR 1/4 1.687 .843 .4216-4FPCR 3/8 2.125 1.062 .5628-4FPCR 1/2 2.250 1.125 .687
12-4FPCR 3/4 2.875 1.437 .89016-4FPCR 1 3.250 1.625 1.125
PART
NO
.
FEM
ALE
PIPE
SIZ
E
A B C TH
RU-H
OLE
A
B
B
C DTHRU-HOLE
MALE PIPE SIZE
FEMALE PIPE SIZE
A
A
BB
B
B
C THRU-HOLE
FEMALE PIPE SIZE
ALL MALE PIPE TEE
1-3MMM-1 1/16 1.437 .718 .1252-3MMM-2 1/8 1.437 .718 .1874-3MMM-4 1/4 1.875 .937 .2816-3MMM-6 3/8 2.000 1.000 .3758-3MMM-8 1/2 2.750 1.375 .468
12-3MMM-12 3/4 2.750 1.375 .62516-3MMM-16 1 3.750 1.875 .875
PART
NO
.
MAL
E PI
PESI
ZE A B C TH
RU-H
OLE
A
B
BB
CTHRU-HOLE
MALE PIPE SIZE
9
TECH
NIC
AL INFO
RMATIO
NUSE/APPLICATION
Tylok Pipe Fittings are designed and manufactured for applications in power, processing and instrumentation.In designing a system incorporating pipe fittings, it is the designer’s or user’s obligation and responsibility to deter-mine the appropriate fittings to be used for each application, and to insure proper installation and maintenance.
DESIGN/FEATURESTylok Pipe Fittings are manufactured to the same high quality standards as other Tylok Fittings. Each fitting is thoroughly cleaned to eliminate system contamination and features an attractive surface finish to enhance the appearance of modern scientific instrumentation and equipment.
PIPE THREAD SPECIFICATIONSTylok Pipe Fittings are manufactured from materials meeting applicable ASTM or ASME specifications, with pipe threads which meet or exceed ANSI B1.20.1 requirements. Strict quality control procedures are followed through-out production.
Materials: Brass ■ Steel ■ 316 Stainless SteelAluminum ■ Other materials available as special order
Suggest Allowable Working Pressures for Male Pipe Threads
Suggest Allowable Working Pressures for Female Pipe Threads
These charts are to be used as a guide only and are based on normal wall thicknesses, used for the various sizes. These ratings may vary widely from effects suchas the proper use of sealants, size of stock, temperature, corrosion factors, etc. Therefore, Tylok International, Inc., assumes no responsibility for its accuracy in anyindividual design.
When using a combination of fittings such as Male Pipe threads with Female Pipe threads, the minimum rating applies.
HEAT TRACEABILITYTylok Pipe Fittings can be traced back to the original mill heat from which it was made. Starting with the originalbillet, the mill creates a certificate which completely describes the chemical and physical makeup. This is useful forproviding a method for complete material accountability for the manufacturer and end customer.
TEMPERATURE RATINGSThe standard Tylok Instrumentation Fittings are rated at the following temperatures:
316 Stainless -325°F to 1200°F Brass -40°F to 400°F Steel1 -65°F to 400°F Aluminum -40°F to 400°F(-198°C to 648°C) (-40°C to 204°C) (-54°C to 204°C) (-40°C to 204°C)
Note: Consideration should be given to maximum temperature ratings if fittings are coated or plated.
1Special attention should be considered when selecting coated and/or plated materials such as Steel.
INSTALLATION INSTRUCTIONSPipe thread connections are very common in today’s industry. They are relatively easy to work with because of thecommon sizes and dimensions throughout manufacturing. It is important to use a thread sealant. These productsrange from pipe “dopes” to teflon tape, all of which can be purchased through your local Tylok Distributor.
MNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16” 10,100 5,700 10,5001/8” 9,200 5,300 9,8001/4” 7,500 4,100 8,0003/8” 7,250 4,000 7,7001/2” 6,900 3,900 7,3003/4” 6,600 3,700 7,0001” 5,000 2,700 5,000
FNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16” 6,200 3,500 6,8001/8” 6,000 3,400 6,6001/4” 6,100 3,300 6,5003/8” 5,000 2,700 5,4001/2” 4,700 2,500 4,8003/4” 4,300 2,400 4,6001” 4,100 2,300 4,500
Doc. 72306 Rev. C
TYLOK PHILOSOPHYOUR HISTORY
In the mid 1940ʼs, Cullen Crawford founded the Crawford Fitting Company. Mr. Crawford developed and patentedthe original flareless fitting (nut and two ferrule system), for the Crawford Fitting Company. Thus, a new and innov-ative industry was born making it far easier to make tubing connections. This reduces installation time and errors.Since his invention, End Users from all four corners of the globe have made billions of connections. This systemprovides leak proof seals and thus Mr. Crawford has been named “The founder of the flareless fitting.”
OUR MISSIONIt is our mission, at Tylok International, Inc., to continuously strive for and achieve total customer satisfaction withboth our products and services.
OUR GOALTylokʼs aggressive goal is to establish ourselves as an industry leader and expand our market share. This is main-tained in every department within the organization. Our “total effort” will guard against losing the personal touchthat makes our business enjoyable and prosperous for all involved.
INSTRUMENTATION TUBE FITTINGS – Tylok Standard4 Seal, CBC-Lok™, CS-Lok™ • PIPE FITTINGS •
WELD FITTINGS • BALL VALVES – Ty-Flo® Standard &Ty-Flo® 3 Piece • NEEDLE VALVES • INSTRUMENTATION
MANIFOLDS • FLEXIBLE METAL HOSE •
TYLOK INTERNATIONAL, INC.1061 East 260th Street • Euclid, Ohio 44132
Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) [email protected]
www.tylok.com
CBC-LOK® Tube Fittings
34
1
Our GoalTylok’s aggressive goal is to establish ourselves as an industry leader and expand our marketshare. This is maintained in every department within the organization. Our “total effort” willguard against losing the personal touch that makes our business enjoyable and prosperousfor all involved.
2
Our MissionIt is our mission, at Tylok International, Inc., to continuously strive for and achieve totalcustomer satisfaction with both our products and services.
This objective falls within the framework of the larger movement toward “Total Quality” which is derived of four elements:
Make our distributors andsuppliers our partners inproviding the highest qualityproducts and services
Continuous financialsuccess of the company
Total satisfactionof our customers
We accomplish this by maintaining an honest and ethical business relationship with our customers, suppliers and employees.
Create a positiveenvironment for ouremployees that fosterstheir full potential
The Tylok Philosophy
TYLOKTylokTylok
1For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Creation of an IndustryIn the mid 1940s, Cullen Crawford founded theCrawford Fitting Company. Mr. Crawford developedand patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company.Thus, a new and innovative industry was born makingit far easier to make tubing connections. This reduces installation time and errors. Since hisinvention, End Users from all four corners of the globehave made billions of connections. This system provides leak proof seals and thus Mr. Crawford hasbeen named “The founder of the flareless fitting.”
Tylok International, Inc. offers a tube fitting line, CBC-Lok®, that is fully interchangeable with Swagelok® and Parker A-Lok®. Although it is alwaysrecommended to use all CBC-Lok® components,intermixing CBC-Lok® bodies and/or component partswith that of other manufacturers will not adversely affectsealing ability. CBC-Lok® Tube Fittings are made tostrict quality control standards and cannot guaranteethat of other manufacturers. CBC-Lok® Tube Fittings areproudly made in the U.S.A.
CBC-Lok® Tube Fittings are comprised of fourcomponents: The Body, Front Ferrule (Collet), RearFerrule (Collet) and Nut. A leak proof seal is obtainedthrough proper ferrule action as the ferrules aretightened onto the tubing via axial thrust provided bythe nut. The front ferrule provides the leak proof seal,when the nut and ferrules are properly drawn up thespecified number of turns. The rear ferrule grips thetubing preventing pull-off. The stainless steel nuts aresilver plated and a dry film lubricant is applied,reducing torque and ensuring proper sealing.
Ty-Cor™ refers to the treatment which diffuses carboninto the surface of the stainless steel, therebyincreasing the surface hardness without affecting thequality of the metal treated. In fact, when AISI 316stainless steel is treated, the corrosion resistance isequal to or better than non-treated 316 stainless steel.The increase in corrosion resistance to pitting andstress corrosion is very pronounced in media whichcontain chlorides (e.g. sea water, bleach, HCl, etc.).The Ty-Cor™ process applied to the rear ferrule alsohelps eliminate galling and ensures proper sealing ontube end make ups.
Tylok has received the Certificate ofType Approval from the AmericanBureau of Shipping (ABS). Thefollowing Part Families are ABSapproved: DFC – Female
Connector, DMC – Male Connector, DU – Union, DELU – Union Elbow, DME – Male Elbow and DTTT –Union Tee. For further information visit www.eagle.org.
• Double ferrule swaging action
• Total component interchangeability
• Heat Code traceable
• ASTM material construction
• Corrosion resistant 316 Stainless Steel rear ferrules
QMI has registered Tylok International’s QualityManagement System to ISO 9001:2000. The quality system complies with the international standard ISO 9001:2000 and its technical equivalent,ANSI/ISO/ASQ Q9001:2000. Tylok strives to continuously improve the effectiveness of the QualityManagement System by each member within the organization.
Quality Management System
Ty-Cor™ Process
Introduction
Features
ABS Certification
Operation
®
ISO 9001:2000Certificate No.012106
TYLOKTable of Contents/Product LocatorTable of Contents/Product Locator
2 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DATANF DATPF DATPM DBHA DBHFPHow To Adapter Tube Adapter Tube Adapter Tube Bulkhead BulkheadOrder to AN to Female to Male Adapter Female Pipe
Flare Pipe Pipe Connector
4 5 6 7 8 9
DBHMP DBHU DBUANF DCAP DF PLUG DFCBulkhead Bulkhead Bulkhead Cap Fitting Plug FemaleMale Pipe Union to AN Flare ConnectorConnector Union
10 11 11 12 12 13
DMC DMC-ORS DMC-ORT DPCU DRATT DRPCMale O-Ring O-Ring Port Reducer Reducing
Connector Straight Thread Pipe Thread Connector Adapter Tube PortMale Conn. Male Conn. Union to Tube Connector
14 & 15 16 17 18 19 20
DRU DTBW DTSW DU DUANF DELUReducing Tube to Butt Tube to Socket Union Tube to Union Elbow
Union Weld Weld AN FlareConnector Connector Union
21 22 23 24 25 26
HOW
TO
ORDE
R
TYLOKTable of Contents/Product LocatorTable of Contents/Product Locator
3For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DFE DME DTBWE DTSWE DTFT DTMTFemale Elbow Male Elbow Tube to Butt Tube to Female Run Male Run
Weld Elbow Socket Weld Tee TeeElbow
27 28 & 29 30 31 32 33
DTTF DTTM DTTT DCR DBI DPIFemale Male Union Tee Union Cross Barbed Plane
Branch Tee Branch Tee Insert Insert
34 35 36 37 38 39
DN DKN DFC DRCNut Knurled Nut Front Collet Rear Collet Replacement Special
(Ferrule) (Ferrule) Parts Products
40 40 41 41 41 42
Installation Tubing Gas Service/ Technical Heat Tube InsertionInstructions Selection & Safety/ Data Traceability/ Chart/
Preparation Quality Mat’l Spec./ ApplicationsPre-Set Tool
43 44 45 46 47 48
COM
PONE
NTRE
PLAC
EMEN
T
PART
S
CBC-
LOK
®IN
STAL
LATI
ONIN
STRU
CTIO
NSCB
C-LO
K®TU
BING
SELE
CTIO
N &
PREP
ARAT
ION
GAS
SERV
ICE/
SAFE
TY/
QUAL
ITY
TECH
NICA
L DA
TA
TRAC
EABI
LITY
/
MAT
ERIA
L SP
EC./
PRE-
SET
TOOL
TUBE
INSE
RTIO
N
CHAR
T/AP
PLIC
ATIO
NS
SPEC
IAL
PROD
UCTS
HOW TO ORDERHow to Order CBC-LOK® Tube FittingsHow to Order CBC-LOK® Tube Fittings
4 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
CBC-Lok® Tube Fittings are ordered as listed in this catalog by inserting the material code before the part number. CBC-Lok® Tube Fittings can be identified through the part number as to material, tube size, configuration and threadconnection. The part number describes a complete fitting assembly. The size nomenclature to describe a tee fittingis from left (1) to right (2) and down (3). Special Configurations available upon request.
Example: A Stainless Steel Female Run Tee, 3/8" Tube Size to 1/4" Female Pipe to 3/8" Tube is designated asfollows.
Chart 2 - Tube O.D.Chart 1 - Material
Chart 3 - Style
Chart 4 - Description
B BrassSS Stainless SteelS Steel
D CBC-Lok®
Tube or Pipe AN TubeHose OD Thread Flare Size Pipe Thread
Designator (inches) (NPT) (inches) BSPP/BSPT
1 1/16 1/16-27 1/16-282 1/8 1/8-27 1/8 1/8-283 3/16 3/164 1/4 1/4-18 1/4 1/4-195 5/16 5/166 3/8 3/8-18 3/8 3/8-198 1/2 1/2-14 1/2 1/2-14
10 5/8 5/812 3/4 3/4-14 3/4 3/4-1414 7/8 7/816 1 1.0-11 1/2 1 1.0-11
DU UnionDUANF Tube to AN Flare UnionDELU Union ElbowDFE Female ElbowDME Male ElbowDTBWE Tube to Butt Weld ElbowDTSWE Tube to Socket Weld ElbowDTFT Female Run TeeDTMT Male Run TeeDTTF Female Branch TeeDTTM Male Branch TeeDTTT Union TeeDCR Union CrossDBI Barbed InsertDPI Plane InsertDN NutDKN Knurled NutDFC Front ColletDRC Rear Collet
DATANF Adapter Tube to AN FLareDATPF Adapter Tube to Female PipeDATPM Adapter Tube to Male PipeDBHA Bulkhead AdapterDBHFP Bulkhead Female Pipe ConnectorDBHMP Bulkhead Male Pipe ConnectorDBHU Bulkhead UnionDBUANF Bulkhead to AN Flare UnionDCAP CapDF PLUG Fitting PlugDFC Female ConnectorDMC Male ConnectorDMC-ORS O Ring Straight Thread Male ConnectorDMC-ORT O Ring Pipe Thread Male ConnectorDPCU Port Connector UnionDRATT Reducer Adapter Tube to TubeDRPC Reducing Port ConnectorDRU Reducing UnionDTBW Tube to Butt Weld ConnectorDTSW Tube to Socket Weld Connector
SS - 6 - D TFT - 4 1 2
Material Tube O.D. Style Description Odd End Size
Chart 1 Chart 2 Chart 3 Chart 4 Chart 23
*NOTE: All dimensions subject to change, to be used for reference only.
DATANFDATANFDATANF
PART T J A D E L BHNUMBER INTERCHANGES WITH TUBE O.D. THREAD THRU HOLE BODY HEX
2-DATANF-2 2-TA-1-2AN 1/8 5/16-24 1.203 .448 .062 .531 3/82-DATANF-4 2-TA-1-4AN 1/8 7/16-20 1.312 .550 .094 .531 1/23-DATANF-3 3-TA-1-3AN 3/16 3/8-24 1.250 .479 .125 .562 7/164-DATANF-4 4-TA-1-4AN 1/4 7/16-20 1.469 .550 .172 .625 1/25-DATANF-5 5-TA-1-5AN 5/16 1/2-20 1.453 .550 .234 .656 9/166-DATANF-4 6-TA-1-4AN 3/8 7/16-20 1.531 .550 .172 .687 1/26-DATANF-6 6-TA-1-6AN 3/8 9/16-18 1.500 .556 .281 .687 5/88-DATANF-8 8-TA-1-8AN 1/2 3/4-16 1.906 .657 .391 .906 13/16
10-DATANF-10 10-TA-1-10AN 5/8 7/8-14 2.031 .758 .484 .969 15/1612-DATANF-12 12-TA-1-12AN 3/4 1-1/16-12 2.187 .864 .656 .969 1-1/816-DATANF-16 16-TA-1-16AN 1 1-5/16-12 2.531 .911 .937 1.219 1-3/8
Adapter Tube to
AN Flare
5For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DATPFDATPFDATPF
Adapter Tube toFemale Pipe
6 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
T P A E L BHPART TUBE PIPE END THRU HOLE BODY HEX
NUMBER INTERCHANGES WITH O.D. NPT
2-DATPF-2 2-TA-7-2 2FA2N 1/8 1/8 1.234 .094 .531 9/16
2-DATPF-4 2-TA-7-4 2FA4N 1/8 1/4 1.375 .094 .531 3/4
3-DATPF-2 3-TA-7-2 3FA2N 3/16 1/8 1.266 .125 .562 9/16
3-DATPF-4 3-TA-7-4 3FA4N 3/16 1/4 1.406 .125 .562 3/4
4-DATPF-2 4-TA-7-2 4FA2N 1/4 1/8 1.312 .187 .625 9/16
4-DATPF-4 4-TA-7-4 4FA4N 1/4 1/4 1.469 .187 .625 3/4
4-DATPF-6 4-TA-7-6 4FA6N 1/4 3/8 1.562 .187 .625 7/8
4-DATPF-8 4-TA-7-8 4FA8N 1/4 1/2 1.812 .187 .625 1-1/16
5-DATPF-2 5-TA-7-2 5FA2N 5/16 1/8 1.359 .250 .656 9/16
5-DATPF-4 5-TA-7-4 5FA4N 5/16 1/4 1.516 .250 .656 3/4
6-DATPF-2 6-TA-7-2 6FA2N 3/8 1/8 1.391 .281 .687 9/16
6-DATPF-4 6-TA-7-4 6FA4N 3/8 1/4 1.547 .281 .687 3/4
6-DATPF-6 6-TA-7-6 6FA6N 3/8 3/8 1.625 .281 .687 7/8
6-DATPF-8 6-TA-7-8 6FA8N 3/8 1/2 1.843 .281 .687 1-1/16
8-DATPF-4 8-TA-7-4 8FA4N 1/2 1/4 1.719 .391 .906 3/4
8-DATPF-6 8-TA-7-6 8FA6N 1/2 3/8 1.859 .391 .906 7/8
8-DATPF-8 8-TA-7-8 8FA8N 1/2 1/2 2.093 .391 .906 1-1/16
10-DATPF-6 10-TA-7-6 10FA6N 5/8 3/8 1.828 .500 .969 7/8
10-DATPF-8 10-TA-7-8 10FA8N 5/8 1/2 2.093 .500 .969 1-1/16
12-DATPF-8 12-TA-7-8 12FA8N 3/4 1/2 2.093 .594 .969 1-1/16
14-DATPF-12 14-TA-7-12 14FA12N 7/8 3/4 2.203 .687 1.031 1-1/4
16-DATPF-12 16-TA-7-12 16FA12N 1 3/4 2.406 .797 1.219 1-1/4
16-DATPF-16 16-TA-7-16 16FA16N 1 1 2.547 .797 1.219 1-5/8
DATPMDATPMDATPM
Adapter Tube toMale Pipe
7For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
T P A D E1 L W BHPART TUBE PIPE END THRU BODY
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX
2-DATPM-2 2-TA-1-2 2MA2N 1/8 1/8 1.156 .375 .093 .531 .022 7/16
2-DATPM-4 2-TA-1-4 2MA4N 1/8 1/4 1.375 .562 .093 .531 .022 9/16
3-DATPM-2 3-TA-1-2 3MA2N 3/16 1/8 1.187 .375 .187 .562 .022 7/16
3-DATPM-4 3-TA-1-4 3MA4N 3/16 1/4 1.406 .562 .281 .562 .022 9/16
4-DATPM-2 4-TA-1-2 4MA2N 1/4 1/8 1.250 .375 .171 .625 .032 7/16
4-DATPM-4 4-TA-1-4 4MA4N 1/4 1/4 1.469 .562 .171 .625 .032 9/16
4-DATPM-6 4-TA-1-6 4MA6N 1/4 3/8 1.500 .562 .171 .625 .032 11/16
4-DATPM-8 4-TA-1-8 4MA8N 1/4 1/2 1.718 .750 .171 .625 .032 7/8
5-DATPM-2 5-TA-1-2 5MA2N 5/16 1/8 1.297 .375 .187 .656 .032 7/16
5-DATPM-4 5-TA-1-4 5MA4N 5/16 1/4 1.500 .562 .250 .656 .032 9/16
6-DATPM-2 6-TA-1-2 6MA2N 3/8 1/8 1.343 .375 .187 .687 .032 7/16
6-DATPM-4 6-TA-1-4 6MA4N 3/8 1/4 1.547 .562 .281 .687 .032 9/16
6-DATPM-6 6-TA-1-6 6MA6N 3/8 3/8 1.562 .562 .281 .687 .032 11/16
6-DATPM-8 6-TA-1-8 6MA8N 3/8 1/2 1.781 .750 .281 .687 .032 7/8
8-DATPM-4 8-TA-1-4 8MA4N 1/2 1/4 1.750 .562 .281 .906 .047 9/16
8-DATPM-6 8-TA-1-6 8MA6N 1/2 3/8 1.781 .562 .375 .906 .047 11/16
8-DATPM-8 8-TA-1-8 8MA8N 1/2 1/2 2.000 .750 .391 .906 .047 7/8
10-DATPM-6 10-TA-1-6 10MA6N 5/8 3/8 1.844 .562 .375 .969 .047 11/16
10-DATPM-8 10-TA-1-8 10MA8N 5/8 1/2 2.062 .750 .468 .969 .047 7/8
10-DATPM-12 10-TA-1-12 10MA12N 5/8 3/4 2.062 .750 .500 .969 .047 1-1/16
12-DATPM-8 12-TA-1-8 12MA8N 3/4 1/2 2.062 .750 .468 .969 .047 7/8
12-DATPM-12 12-TA-1-12 12MA12N 3/4 3/4 2.062 .750 .594 .969 .047 1-1/16
12-DATPM-16 12-TA-1-16 12MA16N 3/4 1 2.359 .937 .594 .969 .047 1-3/8
14-DATPM-12 14-TA-1-12 14MA12N 7/8 3/4 2.125 .750 .687 1.031 .047 1-3/8
16-DATPM-12 16-TA-1-12 16MA12N 1 3/4 2.312 .750 .625 1.218 .047 1-1/16
16-DATPM-16 16-TA-1-16 16MA16N 1 1 2.625 .937 .797 1.218 .047 1-3/8
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
DBHADBHADBHA
T1 T2 A B C D E F L NH JNH BH PANELPART INTERCHANGES TUBE TUBE THRU NUT JAM NUT BODY HOLE
NUMBER WITH O.D. O.D. HOLE HEX HEX HEX
2-DBHA-2 200-R1-2 2TUBC2 1/8 1/8 1.953 .500 1.234 .531 .078 .969 1.687 7/16 1/2 1/2 21/64
4-DBHA-4 400-R1-4 4TUBC4 1/4 1/4 2.203 .609 1.328 .625 .187 1.031 1.906 9/16 5/8 5/8 29/64
6-DBHA-6 600-R1-6 6TUBC6 3/8 3/8 2.406 .656 1.453 .687 .281 1.156 2.125 11/16 3/4 3/4 37/64
8-DBHA-8 810-R1-8 8TUBC8 1/2 1/2 2.875 .906 1.656 .906 .391 1.250 2.468 7/8 15/16 15/16 49/64
Bulkhead Adapter
*NOTE: All dimensions subject to change, to be used for reference only.
8 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
DBHFPDBHFPDBHFP
T P A B C D E L NH JNH BH PANELPART INTERCHANGES TUBE PIPE END THRU NUT JAM NUT BODY HOLE
NUMBER WITH O.D. NPT HOLE HEX HEX HEX
2-DBHFP-2 200-71-2 2FBC2N 1/8 1/8 1.766 .500 1.234 .969 .094 1.500 7/16 1/2 9/16 21/64
3-DBHFP-2 300-71-2 3FBC2N 3/16 1/8 1.797 .547 1.266 1.000 .125 1.531 1/2 9/16 9/16 25/64
4-DBHFP-2 400-71-2 4FBC2N 1/4 1/8 1.859 .609 1.328 1.031 .187 1.562 9/16 5/8 5/8 29/64
4-DBHFP-4 400-71-4 4FBC4N 1/4 1/4 2.047 .609 1.328 1.031 .187 1.750 9/16 5/8 3/4 29/64
5-DBHFP-2 500-71-2 5FBC2N 5/16 1/8 1.969 .641 1.422 1.125 .250 1.656 5/8 3/4 11/16 33/64
6-DBHFP-4 600-71-4 6FBC4N 3/8 1/4 2.172 .656 1.453 1.156 .281 1.875 11/16 3/4 3/4 37/64
8-DBHFP-6 810-71-6 8FBC6N 1/2 3/8 2.437 .906 1.656 1.250 .406 2.031 7/8 15/16 15/16 49/64
8-DBHFP-8 810-71-8 8FBC8N 1/2 1/2 2.625 .906 1.656 1.250 .406 2.219 7/8 15/16 1-1/16 49/64
10-DBHFP-8 1010-71-8 10FBC8N 5/8 1/2 2.656 .969 1.687 1.281 .500 2.250 1 1-1/16 1-1/16 57/64
16-DBHFP-16 1610-71-16 16FBC16N 1 1 3.687 1.234 2.266 1.781 .875 3.187 1-1/2 1-1/2 1-5/8 1-21/64
Bulkhead FemalePipe Connector
9For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DBHMPDBHMPDBHMP
T P A B C D E1 F L NH JNH BH PANELPART INTERCHANGES TUBE PIPE END THRU NUT JAM NUT BODY HOLE
NUMBER WITH O.D. NPT HOLE HEX HEX HEX
1-DBHMP-1 100-11-1 1MBC1N 1/16 1/16 1.187 .437 .687 .375 .052 .531 1.031 5/16 7/16 5/16 13/64
1-DBHMP-2 100-11-2 1MBC2N 1/16 1/8 1.234 .437 .687 .375 .052 .531 1.094 5/16 7/16 7/16 13/64
2-DBHMP-2 200-11-2 2MBC2N 1/8 1/8 1.828 .500 1.234 .375 .094 .969 1.578 7/16 1/2 1/2 21/64
3-DBHMP-2 300-11-2 3MBC2N 3/16 1/8 1.859 .547 1.266 .375 .125 1.000 1.594 1/2 9/16 9/16 25/64
4-DBHMP-2 400-11-2 4MBC2N 1/4 1/8 1.953 .609 1.328 .375 .187 1.031 1.656 9/16 5/8 5/8 29/64
4-DBHMP-4 400-11-4 4MBC4N 1/4 1/4 2.109 .609 1.328 .562 .187 1.031 1.843 9/16 5/8 5/8 29/64
4-DBHMP-6 400-11-6 4MBC6N 1/4 3/8 2.187 .609 1.328 .562 .187 1.016 1.891 9/16 5/8 11/16 29/64
4-DBHMP-8 400-11-8 4MBC8N 1/4 1/2 2.484 .609 1.328 .562 .187 1.016 2.187 9/16 5/8 7/8 29/64
6-DBHMP-4 600-11-4 6MBC4N 3/8 1/4 2.266 .656 1.453 .562 .281 1.156 1.969 11/16 3/4 3/4 37/64
6-DBHMP-6 600-11-6 6MBC6N 3/8 3/8 2.312 .656 1.437 .562 .281 1.156 1.969 11/16 3/4 3/4 37/64
6-DBHMP-8 600-11-8 6MBC8N 3/8 1/2 2.609 .656 1.437 .750 .375 1.156 2.312 11/16 3/4 7/8 37/64
8-DBHMP-4 810-11-4 8MBC4N 1/2 1/4 2.547 .906 1.656 .562 .375 1.250 2.141 7/8 15/16 15/16 49/64
8-DBHMP-6 810-11-6 8MBC6N 1/2 3/8 2.484 .906 1.656 .562 .375 1.250 2.094 7/8 15/16 15/16 49/64
8-DBHMP-8 810-11-8 8MBC8N 1/2 1/2 2.719 .906 1.656 .750 .406 1.250 2.312 7/8 15/16 15/16 49/64
Bulkhead Male Pipe Connector
*NOTE: All dimensions subject to change, to be used for reference only.
10 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
*NOTE: All dimensions subject to change, to be used for reference only.
DBHU/DBUANFDBHU/DBUANFDBHU/DBUANF
T A B C1 C2 D E L NH JNH BH PANELPART INTERCHANGES TUBE THRU NUT JAM NUT BODY HOLE
NUMBER WITH O.D. HOLE HEX HEX HEX
1-DBHU-1 100-61 1BC1 1/16 1.234 .344 .687 .437 .531 .052 .937 5/16 5/16 5/16 13/64
2-DBHU-2 200-61 2BC2 1/8 2.016 .500 1.234 .609 .969 .094 1.500 7/16 1/2 1/2 21/64
3-DBHU-3 300-61 3BC3 3/16 2.109 .547 1.266 .625 1.000 .125 1.594 1/2 9/16 9/16 25/64
4-DBHU-4 400-61 4BC4 1/4 2.266 .609 1.328 .703 1.031 .187 1.687 9/16 5/8 5/8 29/64
5-DBHU-5 500-61 5BC5 5/16 2.391 .641 1.406 .734 1.125 .250 1.812 5/8 11/16 11/16 33/64
6-DBHU-6 600-61 6BC6 3/8 2.453 .656 1.453 .766 1.156 .281 1.875 11/16 3/4 3/4 37/64
8-DBHU-8 810-61 8BC8 1/2 2.797 .906 1.656 .859 1.250 .406 2.000 7/8 15/16 15/16 49/64
10-DBHU-10 1010-61 10BC10 5/8 2.859 .969 1.687 .859 1.281 .500 2.062 1 1-1/16 1-1/16 57/64
12-DBHU-12 1210-61 12BC12 3/4 3.109 .969 1.875 .859 1.469 .625 2.312 1-1/8 1-3/16 1-3/16 1-1/64
14-DBHU-14 1410-61 14BC14 7/8 3.328 1.031 2.094 .875 1.687 .718 2.531 1-1/4 1-3/8 1-3/8 1-9/64
16-DBHU-16 1610-61 16BC16 1 3.766 1.234 2.266 1.047 1.781 .875 2.812 1-1/2 1-5/8 1-5/8 1-21/64
Bulkhead Union
*NOTE: All dimensions subject to change, to be used for reference only.
T J A B C D E F L NH BH JNH PANELPART INTERCHANGES TUBE THREAD THRU NUT BODY JAM HOLE
NUMBER WITH O.D. HOLE HEX HEX NUT HEX
2-DBUANF-2 200-61-2AN 2XABC2 1/8 5/16-24 1.906 .516 1.234 .453 .062 .969 1.656 7/16 1/2 1/2 21/64
3-DBUANF-3 300-61-3AN 3XABC3 3/16 3/8-24 1.984 .547 1.266 .484 .125 1.000 1.719 1/2 9/16 9/16 25/64
4-DBUANF-4 400-61-4AN 4XABC4 1/4 7/16-20 2.125 .609 1.328 .547 .172 1.031 1.828 9/16 5/8 5/8 29/64
5-DBUANF-5 500-61-5AN 5XABC5 5/16 1/2-20 2.219 .641 1.406 .547 .234 1.125 1.922 5/8 11/16 11/16 33/64
6-DBUANF-6 600-61-6AN 6XABC6 3/8 9/16-18 2.250 .656 1.453 .562 .281 1.156 1.969 11/16 11/16 3/4 37/64
8-DBUANF-8 810-61-8AN 8XABC8 1/2 3/4-16 2.594 .906 1.656 .656 .391 1.250 2.187 7/8 15/16 15/16 49/64
10-DBUANF-10 1010-61-10AN 10XABC10 5/8 7/8-14 2.734 .969 1.687 .766 .484 1.281 2.234 1 1-1/16 1-1/16 57/64
12-DBUANF-12 1210-61-12AN 12XABC12 3/4 1-1/16-12 3.109 .969 1.875 .859 .609 1.469 2.719 1-1/8 1-3/16 1-3/16 1-1/64
16-DBUANF-16 1610-61-16AN 16XABC16 1 1-5/16-12 3.641 1.234 2.266 .906 .844 1.781 3.156 1-1/2 1-5/8 1-5/8 1-21/64
Bulkhead to ANFlare Union
11For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
DCAP/DF PLUGDCAP/DF PlugDCAP/DF Plug
PART T A B C L BH NHNUMBER INTERCHANGES WITH TUBE O.D. BODY HEX NUT HEX
1-DCAP 100-C 1BLEN1 1/16 .594 .344 .437 .437 5/16 5/16
2-DCAP 200-C 2BLEN2 1/8 .797 .500 .609 .531 7/16 7/16
3-DCAP 300-C 3BLEN3 3/16 .844 .547 .625 .578 7/16 1/2
4-DCAP 400-C 4BLEN4 1/4 .922 .609 .703 .625 1/2 9/16
5-DCAP 500-C 5BLEN5 5/16 .969 .641 .734 .672 9/16 5/8
6-DCAP 600-C 6BLEN6 3/8 1.016 .656 .766 .719 5/8 11/16
8-DCAP 810-C 8BLEN8 1/2 1.156 .906 .859 .750 13/16 7/8
10-DCAP 1010-C 10BLEN10 5/8 1.188 .969 .859 .781 15/16 1
12-DCAP 1210-C 12BLEN12 3/4 1.234 .969 .859 .844 1-1/16 1-1/8
14-DCAP 1410-C 14BLEN14 7/8 1.344 1.016 .859 .937 1-3/16 1-1/4
16-DCAP 1610-C 16BLEN16 1 1.516 1.234 1.047 1.031 1-3/8 1-1/2
PART T NHNUMBER INTERCHANGES WITH TUBE O.D. NUT HEX
1-DF PLUG 100-P 1BLP1 1/16 5/16
2-DF PLUG 200-P 2BLP2 1/8 7/16
3-DF PLUG 300-P 3BLP3 3/16 1/2
4-DF PLUG 400-P 4BLP4 1/4 9/16
5-DF PLUG 500-P 5BLP5 5/16 5/8
6-DF PLUG 600-P 6BLP6 3/8 11/16
8-DF PLUG 810-P 8BLP8 1/2 7/8
10-DF PLUG 1010-P 10BLP10 5/8 1
12-DF PLUG 1210-P 12BLP12 3/4 1-1/8
14-DF PLUG 1410-P 14BLP14 7/8 1-1/4
16-DF PLUG 1610-P 16BLP16 1 1-1/2
Cap
Fitting Plug
*NOTE: All dimensions subject to change, to be used for reference only.
12 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
DFCDFCDFC
T P A B C E L NH BHPART TUBE PIPE END THRU NUT BODY
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX HEX
1-DFC-1 100-7-1 1FSC1N 1/16 1/16 .937 .344 .437 .052 .782 5/16 7/161-DFC-2 100-7-2 1FSC2N 1/16 1/8 .969 .344 .437 .052 .812 5/16 9/162-DFC-2 200-7-2 2FSC2N 1/8 1/8 1.125 .500 .609 .094 .875 7/16 9/162-DFC-4 200-7-4 2FSC4N 1/8 1/4 1.328 .500 .609 .094 1.062 7/16 3/42-DFC-6 200-7-6 2FSC6N 1/8 3/8 1.390 .500 .609 .094 1.125 7/16 7/83-DFC-2 300-7-2 3FSC2N 3/16 1/8 1.171 .547 .625 .125 .906 1/2 9/163-DFC-4 300-7-4 3FSC4N 3/16 1/4 1.344 .547 .625 .125 1.094 1/2 3/43-DFC-8 300-7-8 3FSC8N 3/16 1/2 1.594 .547 .625 .125 1.344 1/2 1-1/84-DFC-1 400-7-1 4FSC1N 1/4 1/16 1.203 .609 .703 .187 .906 9/16 1/24-DFC-2 400-7-2 4FSC2N 1/4 1/8 1.234 .609 .703 .187 .937 9/16 9/164-DFC-4 400-7-4 4FSC4N 1/4 1/4 1.406 .609 .703 .187 1.125 9/16 3/44-DFC-6 400-7-6 4FSC6N 1/4 3/8 1.484 .609 .703 .187 1.187 9/16 7/84-DFC-8 400-7-8 4FSC8N 1/4 1/2 1.670 .609 .703 .187 1.375 9/16 1-1/165-DFC-2 500-7-2 5FSC2N 5/16 1/8 1.266 .640 .734 .250 .969 5/8 9/165-DFC-4 500-7-4 5FSC4N 5/16 1/4 1.453 .640 .734 .250 1.156 5/8 3/45-DFC-6 500-7-6 5FSC6N 5/16 3/8 1.515 .640 .734 .250 1.218 5/8 7/85-DFC-8 500-7-8 5FSC8N 5/16 1/2 1.703 .640 .734 .250 1.406 5/8 1-1/166-DFC-2 600-7-2 6FSC2N 3/8 1/8 1.297 .656 .766 .281 1.000 11/16 5/86-DFC-4 600-7-4 6FSC4N 3/8 1/4 1.484 .656 .766 .281 1.187 11/16 3/46-DFC-6 600-7-6 6FSC6N 3/8 3/8 1.547 .656 .766 .281 1.250 11/16 7/86-DFC-8 600-7-8 6FSC8N 3/8 1/2 1.734 .656 .766 .281 1.437 11/16 1-1/166-DFC-12 600-7-12 6FSC12N 3/8 3/4 1.875 .656 .766 .281 1.593 11/16 1-1/48-DFC-4 810-7-4 8FSC4N 1/2 1/4 1.593 .906 .859 .406 1.187 7/8 13/168-DFC-6 810-7-6 8FSC6N 1/2 3/8 1.656 .906 .859 .406 1.250 7/8 7/88-DFC-8 810-7-8 8FSC8N 1/2 1/2 1.843 .906 .859 .406 1.437 7/8 1-1/168-DFC-12 810-7-12 8FSC12N 1/2 3/4 1.906 .906 .859 .406 1.500 7/8 1-1/48-DFC-16 810-7-16 8FSC16N 1/2 1 2.265 .906 .859 .406 1.875 7/8 1-5/8
10-DFC-4 1010-7-4 10FSC4N 5/8 1/4 1.797 .969 .859 .281 1.406 1 15/1610-DFC-6 1010-7-6 10FSC6N 5/8 3/8 1.656 .969 .859 .500 1.250 1 15/1610-DFC-8 1010-7-8 10FSC8N 5/8 1/2 1.844 .969 .859 .500 1.437 1 1-1/1610-DFC-12 1010-7-12 10FSC12N 5/8 3/4 1.953 .969 .859 .500 1.562 1 1-1/412-DFC-6 1210-7-6 12FSC6N 3/4 3/8 1.655 .969 .859 .500 1.265 1-1/8 1-1/1612-DFC-8 1210-7-8 12FSC8N 3/4 1/2 1.844 .969 .859 .625 1.437 1-1/8 1-1/1612-DFC-12 1210-7-12 12FSC12N 3/4 3/4 1.906 .969 .859 .625 1.500 1-1/8 1-1/412-DFC-16 1210-7-16 12FSC16N 3/4 1 2.265 .969 .859 .625 1.875 1-1/8 1-5/814-DFC-8 1410-7-8 14FSC8N 7/8 1/2 1.828 1.016 .859 .687 1.437 1-1/4 1-5/1614-DFC-12 1410-7-12 14FSC12N 7/8 3/4 1.969 1.016 .859 .719 1.562 1-1/4 1-3/814-DFC-16 1410-7-16 14FSC16N 7/8 1 2.234 1.016 .859 .719 1.843 1-1/4 1-5/816-DFC-12 1610-7-12 16FSC12N 1 3/4 2.109 1.234 1.047 .875 1.625 1-1/2 1-3/816-DFC-16 1610-7-16 16FSC16N 1 1 2.453 1.234 1.047 .875 1.969 1-1/2 1-5/8
Female Connector
13For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
®
DMCDMCDMC
T P A B C D E1 L NH BHPART TUBE PIPE END THRU NUT BODY
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX HEX
1-DMC-1 100-1-1 1MSC1N 1/16 1/16 .937 .344 .437 .375 .052 .797 5/16 5/16
1-DMC-2 100-1-2 1MSC2N 1/16 1/8 1.031 .344 .437 .375 .052 .875 5/16 7/16
2-DMC-1 200-1-1 2MSC1N 1/8 1/16 1.172 .500 .609 .375 .094 .906 7/16 7/16
2-DMC-2 200-1-2 2MSC2N 1/8 1/8 1.203 .500 .609 .375 .094 .937 7/16 7/16
2-DMC-4 200-1-4 2MSC4N 1/8 1/4 1.406 .500 .609 .562 .094 1.140 7/16 9/16
2-DMC-6 200-1-6 2MSC6N 1/8 3/8 1.406 .500 .609 .562 .094 1.156 7/16 11/16
2-DMC-8 200-1-8 2MSC8N 1/8 1/2 1.656 .500 .609 .750 .094 1.406 7/16 7/8
3-DMC-2 300-1-2 3MSC2N 3/16 1/8 1.234 .546 .625 .375 .125 .969 1/2 7/16
3-DMC-4 300-1-4 3MSC4N 3/16 1/4 1.437 .546 .625 .562 .125 1.171 1/2 9/16
4-DMC-1 400-1-1 4MSC1N 1/4 1/16 1.299 .609 .703 .375 .125 1.000 9/16 1/2
4-DMC-2 400-1-2 4MSC2N 1/4 1/8 1.299 .609 .703 .375 .187 1.000 9/16 1/2
4-DMC-4 400-1-4 4MSC4N 1/4 1/4 1.484 .609 .703 .562 .187 1.203 9/16 9/16
4-DMC-6 400-1-6 4MSC6N 1/4 3/8 1.516 .609 .703 .562 .187 1.219 9/16 11/16
4-DMC-8 400-1-8 4MSC8N 1/4 1/2 1.766 .609 .703 .750 .187 1.469 9/16 7/8
4-DMC-12 400-1-12 4MSC12N 1/4 3/4 1.828 .609 .703 .750 .187 1.531 9/16 1-1/16
4-DMC-16 400-1-16 4MSC16N 1/4 1 2.109 .609 .703 .937 .187 1.812 9/16 1-3/8
5-DMC-2 500-1-2 5MSC2N 5/16 1/8 1.343 .641 .734 .375 .187 1.047 5/8 9/16
5-DMC-4 500-1-4 5MSC4N 5/16 1/4 1.516 .641 .734 .562 .250 1.234 5/8 9/16
5-DMC-6 500-1-6 5MSC6N 5/16 3/8 1.547 .641 .734 .562 .250 1.250 5/8 11/16
5-DMC-8 500-1-8 5MSC8N 5/16 1/2 1.765 .641 .734 .750 .250 1.468 5/8 7/8
6-DMC-2 600-1-2 6MSC2N 3/8 1/8 1.390 .656 .766 .375 .187 1.109 11/16 5/8
6-DMC-4 600-1-4 6MSC4N 3/8 1/4 1.578 .656 .766 .562 .281 1.281 11/16 5/8
6-DMC-6 600-1-6 6MSC6N 3/8 3/8 1.578 .656 .766 .562 .281 1.281 11/16 11/16
6-DMC-8 600-1-8 6MSC8N 3/8 1/2 1.828 .656 .766 .750 .281 1.531 11/16 7/8
6-DMC-12 600-1-12 6MSC12N 3/8 3/4 1.875 .656 .766 .750 .281 1.593 11/16 1-1/16
6-DMC-16 600-1-16 6MSC16N 3/8 1 2.141 .656 .766 .937 .281 1.843 11/16 1-3/8
Male Connector
14 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
®
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
DMCDMCDMC
T P A B C D E1 L NH BHPART TUBE PIPE END THRU NUT BODY
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX HEX
8-DMC-2 810-1-2 8MSC2N 1/2 1/8 1.531 .906 .859 .375 .187 1.125 7/8 13/16
8-DMC-4 810-1-4 8MSC4N 1/2 1/4 1.719 .906 .859 .562 .281 1.312 7/8 13/16
8-DMC-6 810-1-6 8MSC6N 1/2 3/8 1.719 .906 .859 .562 .375 1.312 7/8 13/16
8-DMC-8 810-1-8 8MSC8N 1/2 1/2 1.937 .906 .859 .750 .406 1.531 7/8 7/8
8-DMC-12 810-1-12 8MSC12N 1/2 3/4 1.984 .906 .859 .750 .406 1.593 7/8 1-1/16
8-DMC-16 810-1-16 8MSC16N 1/2 1 2.250 .906 .859 .937 .406 1.859 7/8 1-3/8
10-DMC-4 1010-1-4 10MSC4N 5/8 1/4 1.934 .969 .859 .562 .281 1.343 1 15/16
10-DMC-6 1010-1-6 10MSC6N 5/8 3/8 1.934 .969 .859 .562 .375 1.343 1 15/16
10-DMC-8 1010-1-8 10MSC8N 5/8 1/2 1.937 .969 .859 .750 .469 1.531 1 15/16
10-DMC-12 1010-1-12 10MSC12N 5/8 3/4 1.984 .969 .859 .750 .500 1.593 1 1-1/16
10-DMC-16 1010-1-16 10MSC16N 5/8 1 2.172 .969 .859 .937 .500 1.781 1 1-3/8
12-DMC-4 1210-1-4 12MSC4N 3/4 1/4 1.796 .969 .859 .562 .281 1.405 1-1/4 1-1/8
12-DMC-6 1210-1-6 12MSC6N 3/4 3/8 1.796 .969 .859 .562 .375 1.405 1-1/4 1-1/8
12-DMC-8 1210-1-8 12MSC8N 3/4 1/2 1.984 .969 .859 .750 .468 1.593 1-1/8 1-1/16
12-DMC-12 1210-1-12 12MSC12N 3/4 3/4 1.984 .969 .859 .750 .625 1.593 1-1/8 1-1/16
12-DMC-16 1210-1-16 12MSC16N 3/4 1 2.250 .969 .859 .937 .625 1.859 1-1/8 1-3/8
14-DMC-8 1410-1-8 14MSC8N 7/8 1/2 1.984 1.015 .859 .750 .468 1.593 1-3/8 1-1/4
14-DMC-12 1410-1-12 14MSC12N 7/8 3/4 1.984 1.015 .859 .750 .625 1.593 1-1/4 1-3/16
14-DMC-16 1410-1-16 14MSC16N 7/8 1 2.250 1.015 .859 .937 .718 1.859 1-1/4 1-3/8
16-DMC-4 1610-1-4 16MSC4N 1 1/4 2.055 1.234 1.046 .562 .281 1.562 1-1/2 1-3/8
16-DMC-6 1610-1-6 16MSC6N 1 3/8 2.055 1.234 1.046 .562 .375 1.562 1-1/2 1-3/8
16-DMC-8 1610-1-8 16MSC8N 1 1/2 2.265 1.234 1.046 .750 .468 1.781 1-1/2 1-3/8
16-DMC-12 1610-1-12 16MSC12N 1 3/4 2.265 1.234 1.046 .750 .625 1.781 1-1/2 1-3/8
16-DMC-16 1610-1-16 16MSC16N 1 1 2.453 1.234 1.046 .937 .875 1.969 1-1/2 1-3/8
Male Connector
15For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
®
DMC-ORSDMC-ORSDMC-ORS
T J A B C D E1 L NH BHPART TUBE THREAD THRU NUT BODY O-RING
NUMBER INTERCHANGES WITH O.D. HOLE HEX HEX
1-DMC-ORS 100-1-OR 1M2SC1 1/16 5/16-24 1.047 .344 .437 .343 .047 .906 5/16 9/16 AS-011
2-DMC-ORS 200-1-OR 2M2SC2 1/8 5/16-24 1.297 .500 .609 .343 .094 1.031 7/16 9/16 AS-011
3-DMC-ORS 300-1-OR 3M2SC3 3/16 3/8-24 1.359 .547 .625 .375 .125 1.094 1/2 5/8 AS-012
4-DMC-ORS 400-1-OR 4M2SC4 1/4 7/16-20 1.516 .609 .703 .406 .187 1.219 9/16 3/4 AS-111
5-DMC-ORS 500-1-OR 5M2SC5 5/16 1/2-20 1.609 .641 .734 .437 .250 1.312 5/8 7/8 AS-112
6-DMC-ORS 600-1-OR 6M2SC6 3/8 9/16-18 1.672 .656 .766 .468 .281 1.375 11/16 15/16 AS-113
8-DMC-ORS 810-1-OR 8M2SC8 1/2 3/4-16 1.812 .906 .859 .468 .406 1.406 7/8 1-1/8 AS-116
12-DMC-ORS 1210-1-OR 12M2SC12 3/4 1-1/16-12 2.062 .969 .859 .562 .625 1.656 1-1/8 1-1/2 AS-215
16-DMC-ORS 1610-1-OR 16M2SC16 1 1-5/16-12 2.297 1.234 1.047 .562 .875 1.812 1-1/2 1-3/4 AS-219
O-Ring StraightThread MaleConnector
*NOTE: All dimensions subject to change, to be used for reference only.
**NOTE: Stainless steel and carbon steel O-seal fittings up to 1 in. are rated to 3000 psi.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
16 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
**NOTE: Stainless steel and carbon steel O-seal fittings up to 1 in. are rated to 3000 psi.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
DMC-ORTDMC-ORTDMC-ORT
T P A B C D E1 L NH BHPART TUBE PIPE END THRU NUT BODY O-RING
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX HEX
2-DMC-2-ORT 200-1-2-OR 2M3SC2 1/8 1/8 1.297 .500 .609 .280 .094 1.031 7/16 3/4 AS-111
2-DMC-4-ORT 200-1-4-OR 2M3SC4 1/8 1/4 1.437 .516 .609 .375 .094 1.172 7/16 15/16 AS-113
3-DMC-4-ORT 300-1-4-OR 3M3SC4 3/16 1/4 1.469 .547 .641 .375 .125 1.203 1/2 15/16 AS-113
4-DMC-2-ORT 400-1-2-OR 4M3SC2 1/4 1/8 1.375 .609 .703 .280 .187 1.094 9/16 3/4 AS-111
4-DMC-4-ORT 400-1-4-OR 4M3SC4 1/4 1/4 1.516 .609 .703 .375 .187 1.219 9/16 15/16 AS-113
6-DMC-6-ORT 600-1-6-OR 6M3SC6 3/8 3/8 1.625 .656 .766 .406 .281 1.344 11/16 1-1/8 AS-116
6-DMC-8-ORT 600-1-8-OR 6M3SC8 3/8 1/2 1.859 .656 .766 .531 .281 1.562 11/16 1-3/8 AS-212
8-DMC-4-ORT 810-1-4-OR 8M3SC4 1/2 1/4 1.687 .906 .875 .375 .281 1.281 7/8 15/16 AS-113
8-DMC-8-ORT 810-1-8-OR 8M3SC8 1/2 1/2 1.969 .906 .859 .531 .406 1.562 7/8 1-3/8 AS-212
10-DMC-12-ORT 1010-1-12-OR 10M3SC12 5/8 3/4 2.062 .969 .875 .562 .500 1.656 1 1-1/2 AS-215
12-DMC-12-ORT 1210-1-12-OR 12M3SC12 3/4 3/4 2.062 .969 .875 .562 .625 1.656 1-1/8 1-1/2 AS-215
O-Ring Pipe ThreadMale Connector
17For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DPCUDPCUDPCU
PART T A B ENUMBER INTERCHANGES WITH TUBE O.D. THRU HOLE
1-DPCU-1 101-PC 1PC1 1/16 .547 .422 .031
2-DPCU-2 201-PC 2PC2 1/8 .875 .625 .094
4-DPCU-4 401-PC 4PC4 1/4 .969 .734 .187
5-DPCU-5 501-PC 5PC5 5/16 1.016 .797 .250
6-DPCU-6 601-PC 6PC6 3/8 1.031 .797 .297
8-DPCU-8 811-PC 8PC8 1/2 1.406 1.016 .391
12-DPCU-12 1211-PC 12PC12 3/4 1.469 1.094 .594
16-DPCU-16 1611-PC 16PC16 1 1.906 1.359 .812
Port ConnectorUnion
*NOTE: All dimensions subject to change, to be used for reference only.
18 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
DRATTDRATTDRATT
T1 T2 A B C E L NH BHPART TUBE TUBE THRU NUT BODY
NUMBER INTERCHANGES WITH O.D. O.D. HOLE HEX HEX
1-DRATT-2 100-R-2 2TUR1 1/16 1/8 1.156 .344 .437 .052 1.000 5/16 5/16
1-DRATT-4 100-R-4 4TUR1 1/16 1/4 1.234 .344 .437 .052 1.094 5/16 5/16
2-DRATT-1 200-R-1 1TUR2 1/8 1/16 1.141 .500 .609 .031 .875 7/16 7/16
2-DRATT-2 200-R-2 2TUR2 1/8 1/8 1.328 .500 .609 .078 1.062 7/16 7/16
2-DRATT-3 200-R-3 3TUR2 1/8 3/16 1.359 .500 .609 .094 1.094 7/16 7/16
2-DRATT-4 200-R-4 4TUR2 1/8 1/4 1.422 .500 .609 .094 1.156 7/16 7/16
2-DRATT-6 200-R-6 6TUR2 1/8 3/8 1.484 .500 .609 .094 1.219 7/16 7/16
2-DRATT-8 200-R-8 8TUR2 1/8 1/2 1.734 .500 .609 .094 1.484 7/16 9/16
3-DRATT-2 300-R-2 2TUR3 3/16 1/8 1.375 .547 .625 .078 1.109 1/2 7/16
3-DRATT-4 300-R-4 4TUR3 3/16 1/4 1.469 .547 .625 .125 1.203 1/2 7/16
4-DRATT-2 400-R-2 2TUR4 1/4 1/8 1.453 .609 .703 .078 1.156 9/16 1/2
4-DRATT-4 400-R-4 4TUR4 1/4 1/4 1.547 .609 .703 .187 1.250 9/16 1/2
4-DRATT-5 400-R-5 5TUR4 1/4 5/16 1.578 .609 .703 .187 1.281 9/16 1/2
4-DRATT-6 400-R-6 6TUR4 1/4 3/8 1.609 .609 .703 .187 1.312 9/16 1/2
4-DRATT-8 400-R-8 8TUR4 1/4 1/2 1.828 .609 .703 .187 1.531 9/16 9/16
4-DRATT-10 400-R-10 10TUR4 1/4 5/8 1.891 .609 .703 .187 1.609 9/16 11/16
5-DRATT-6 500-R-6 6TUR5 5/16 3/8 1.656 .641 .734 .250 1.359 5/8 9/16
5-DRATT-8 500-R-8 8TUR5 5/16 1/2 1.875 .641 .734 .250 1.578 5/8 9/16
6-DRATT-6 600-R-6 6TUR6 3/8 3/8 1.703 .656 .766 .281 1.406 11/16 5/8
6-DRATT-8 600-R-8 8TUR6 3/8 1/2 1.922 .656 .766 .281 1.625 11/16 5/8
6-DRATT-10 600-R-10 10TUR6 3/8 5/8 1.984 .656 .766 .281 1.687 11/16 11/16
6-DRATT-12 600-R-12 12TUR6 3/8 3/4 1.984 .656 .766 .281 1.687 11/16 13/16
8-DRATT-4 810-R-4 4TUR8 1/2 1/4 1.766 .906 .859 .187 1.375 7/8 13/16
8-DRATT-6 810-R-6 6TUR8 1/2 3/8 1.844 .906 .859 .281 1.437 7/8 13/16
8-DRATT-8 810-R-8 8TUR8 1/2 1/2 2.062 .906 .859 .406 1.656 7/8 13/16
8-DRATT-10 810-R-10 10TUR8 1/2 5/8 2.125 .906 .859 .406 1.719 7/8 13/16
8-DRATT-12 810-R-12 12TUR8 1/2 3/4 2.125 .906 .859 .406 1.719 7/8 13/16
8-DRATT-16 810-R-16 16TUR8 1/2 1 2.375 .906 .859 .406 1.969 7/8 1-1/16
10-DRATT-12 1010-R-12 12TUR10 5/8 3/4 2.156 .969 .859 .500 1.750 1 15/16
10-DRATT-14 1010-R-14 14TUR10 5/8 7/8 2.219 .969 .859 .500 1.812 1 15/16
10-DRATT-16 1010-R-16 16TUR10 5/8 1 2.406 .969 .859 .500 2.000 1 1-1/16
12-DRATT-8 1210-R-8 8TUR12 3/4 1/2 2.156 .969 .859 .391 1.750 1-1/8 1-1/16
12-DRATT-16 1210-R-16 16TUR12 3/4 1 2.469 .969 .859 .625 2.062 1-1/8 1-1/16
Reducer AdapterTube to Tube
19For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DRPCDRPCDRPC
PART T1 T2 A B ENUMBER INTERCHANGES WITH TUBE O.D. TUBE O.D. THRU HOLE
2-DRPC-1 201-PC-1 1PC2 1/8 1/16 .687 .344 .031
4-DRPC-1 401-PC-1 1PC4 1/4 1/16 .719 .344 .031
4-DRPC-2 402-PC-2 2PC4 1/4 1/8 .891 .531 .094
6-DRPC-2 601-PC-2 2PC6 3/8 1/8 .906 .531 .094
6-DRPC-4 601-PC-4 4PC6 3/8 1/4 .984 .625 .187
8-DRPC-4 811-PC-4 4PC8 1/2 1/4 1.156 .625 .187
8-DRPC-6 811-PC-6 6PC8 1/2 3/8 1.203 .687 .281
12-DRPC-8 1211-PC-8 8PC12 3/4 1/2 1.437 .906 .391
Reducing PortConnector
*NOTE: All dimensions subject to change, to be used for reference only.
20 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
DRUDRUDRU
T1 T2 A B1 B2 C1 C2 D E L NH1 NH2 BHPART INTERCHANGES TUBE TUBE THRU NUT NUT BODY
NUMBER WITH O.D. O.D. HOLE HEX HEX HEX
2-DRU-1 200-6-1 2RU1 1/8 1/16 1.219 .500 .344 .609 .437 .343 .052 .812 7/16 5/16 7/16
3-DRU-1 300-6-1 3RU1 3/16 1/16 1.266 .547 .344 .625 .437 .375 .052 .859 1/2 5/16 7/16
3-DRU-2 300-6-2 3RU2 3/16 1/8 1.437 .547 .500 .625 .609 .375 .094 .922 1/2 7/16 7/16
4-DRU-2 400-6-2 4RU2 1/4 1/8 1.516 .609 .500 .703 .609 .406 .094 .969 9/16 7/16 1/2
4-DRU-3 400-6-3 4RU3 1/4 3/16 1.547 .609 .547 .703 .625 .406 .125 1.000 9/16 1/2 1/2
5-DRU-2 500-6-2 5RU2 5/16 1/8 1.578 .641 .500 .734 .609 .437 .094 1.016 5/8 7/16 9/16
5-DRU-4 500-6-4 5RU4 5/16 1/4 1.656 .641 .609 .734 .703 .437 .187 1.078 5/8 9/16 9/16
6-DRU-1 600-6-1 6RU1 3/8 1/16 1.437 .656 .344 .765 .437 .468 .052 1.000 11/16 5/16 5/8
6-DRU-2 600-6-2 6RU2 3/8 1/8 1.609 .656 .500 .765 .609 .468 .094 1.062 11/16 7/16 5/8
6-DRU-4 600-6-4 6RU4 3/8 1/4 1.703 .656 .609 .765 .703 .468 .187 1.125 11/16 9/16 5/8
6-DRU-5 600-6-5 6RU5 3/8 5/16 1.734 .656 .641 .765 .734 .468 .250 1.156 11/16 5/8 5/8
8-DRU-2 810-6-2 8RU2 1/2 1/8 1.781 .906 .500 .859 .609 .468 .094 1.125 7/8 7/16 13/16
8-DRU-4 810-6-4 8RU4 1/2 1/4 1.859 .906 .609 .859 .703 .468 .187 1.156 7/8 9/16 13/16
8-DRU-6 810-6-6 8RU6 1/2 3/8 1.906 .906 .656 .859 .765 .468 .281 1.219 7/8 11/16 13/16
10-DRU-6 1010-6-6 10RU6 5/8 3/8 1.937 .969 .656 .859 .765 .468 .281 1.250 1 11/16 15/16
10-DRU-8 1010-6-8 10RU8 5/8 1/2 2.047 .969 .906 .859 .859 .468 .406 1.250 1 7/8 15/16
12-DRU-4 1210-6-4 12RU4 3/4 1/4 1.937 .969 .609 .859 .703 .468 .187 1.250 1-1/8 9/16 1-1/16
12-DRU-6 1210-6-6 12RU6 3/4 3/8 2.000 .969 .656 .859 .765 .468 .281 1.312 1-1/8 11/16 1-1/16
12-DRU-8 1210-6-8 12RU8 3/4 1/2 2.109 .969 .906 .859 .859 .468 .406 1.312 1-1/8 7/8 1-1/16
12-DRU-10 1210-6-10 12RU10 3/4 5/8 2.109 .969 .969 .859 .859 .468 .500 1.312 1-1/8 1 1-1/16
16-DRU-12 1610-6-12 16RU12 1 3/4 2.469 1.234 .969 1.047 .859 .562 .625 1.594 1-1/2 1-1/8 1-3/8
Reducing Union
21For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DTBWDTBWDTBW
T BW A B C D E1 L NH BHPART TUBE THRU NUT BODY
NUMBER INTERCHANGES WITH O.D. HOLE HEX HEX
2-DTBW-2 200-1-2W 2-1/8 ZHLW2 1/8 .405 1.203 .500 .609 .375 .094 .937 7/16 7/16
3-DTBW-2 300-1-2W 3-1/8 ZHLW2 3/16 .405 1.234 .547 .625 .375 .125 .969 1/2 7/16
4-DTBW-2 400-1-2W 4-1/8 ZHLW2 1/4 .405 1.297 .609 .703 .375 .187 1.000 9/16 1/2
4-DTBW-4 400-1-4W 4-1/4 ZHLW2 1/4 .540 1.484 .609 .703 .562 .187 1.203 9/16 9/16
5-DTBW-4 500-1-4W 5-1/4 ZHLW2 5/16 .540 1.516 .641 .734 .562 .250 1.234 5/8 9/16
6-DTBW-4 600-1-4W 6-1/4 ZHLW2 3/8 .540 1.578 .656 .766 .562 .281 1.281 11/16 5/8
6-DTBW-6 600-1-6W 6-3/8 ZHLW2 3/8 .675 1.578 .656 .766 .562 .281 1.281 11/16 3/4
6-DTBW-8 600-1-8W 6-1/2 ZHLW2 3/8 .840 1.828 .656 .766 .750 .281 1.531 11/16 7/8
8-DTBW-6 810-1-6W 8-3/8 ZHLW2 1/2 .675 1.719 .906 .859 .562 .406 1.312 7/8 13/16
8-DTBW-8 810-1-8W 8-1/2 ZHLW2 1/2 .840 1.937 .906 .859 .750 .406 1.531 7/8 7/8
8-DTBW-12 810-1-12W 8-3/4 ZHLW2 1/2 1.050 1.984 .906 .859 .750 .406 1.594 7/8 1-1/16
10-DTBW-8 1010-1-8W 10-1/2 ZHLW2 5/8 .840 1.937 .969 .859 .750 .500 1.531 1 15/16
12-DTBW-12 1210-1-12W 12-3/4 ZHLW2 3/4 1.050 1.984 .969 .859 .750 .625 1.594 1-1/8 1-1/16
16-DTBW-16 1610-1-16W 16-1 ZHLW2 1 1.315 2.453 1.234 1.047 .937 .875 1.969 1-1/2 1-3/8
Tube to Butt WeldConnector
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
22 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
DTSWDTSWDTSW
T1 T2 A B C D E F G L NH BHPART TUBE TUBE THRU NUT BODY
NUMBER INTERCHANGES WITH O.D. O.D. HOLE HEX HEX
2-DTSW-2 200-6-2W 2-2 ZHLW 1/8 1/8 1.141 .500 .609 .344 .094 .312 .250 .875 7/16 7/16
3-DTSW-3 300-6-3W 3-3 ZHLW 3/16 3/16 1.172 .547 .641 .375 .125 .422 .203 .906 1/2 7/16
4-DTSW-4 400-6-4W 4-4 ZHLW 1/4 1/4 1.328 .609 .703 .406 .187 .437 .312 1.031 9/16 1/2
6-DTSW-6 600-6-6W 6-6 ZHLW 3/8 3/8 1.484 .656 .766 .469 .281 .609 .375 1.187 11/16 5/8
8-DTSW-8 810-6-8W 8-8 ZHLW 1/2 1/2 1.625 .906 .859 .469 .406 .750 .500 1.219 7/8 13/16
10-DTSW-10 1010-6-10W 10-10 ZHLW 5/8 5/8 1.656 .969 .859 .469 .500 .922 .500 1.250 1 15/16
12-DTSW-12 1210-6-12W 12-12 ZHLW 3/4 3/4 1.719 .969 .859 .469 .625 1.047 .562 1.312 1-1/8 1-1/16
16-DTSW-16 1610-6-16W 16-16 ZHLW 1 1 2.078 1.234 1.047 .562 .875 1.312 .750 1.594 1-1/2 1-3/8
Tube to Socket Weld Connector
23For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DUDUDU
T A B C D E L NH BHPART TUBE THRU NUT BODY
NUMBER INTERCHANGES WITH O.D. HOLE HEX HEX
1-DU 100-6 1SC1 1/16 .984 .344 .437 .281 .052 .687 5/16 5/16
2-DU 200-6 2SC2 1/8 1.406 .500 .609 .343 .094 .875 7/16 7/16
3-DU 300-6 3SC3 3/16 1.469 .547 .625 .375 .125 .953 1/2 7/16
4-DU 400-6 4SC4 1/4 1.609 .609 .703 .406 .187 1.031 9/16 1/2
5-DU 500-6 5SC5 5/16 1.687 .641 .734 .437 .250 1.109 5/8 9/16
6-DU 600-6 6SC6 3/8 1.766 .656 .766 .468 .281 1.187 11/16 5/8
8-DU 810-6 8SC8 1/2 2.016 .906 .859 .468 .406 1.219 7/8 13/16
10-DU 1010-6 10SC10 5/8 2.047 .969 .859 .468 .500 1.250 1 15/16
12-DU 1210-6 12SC12 3/4 2.109 .969 .859 .468 .625 1.312 1-1/8 1-1/16
14-DU 1410-6 14SC14 7/8 2.187 1.016 .859 .468 .718 1.375 1-1/4 1-3/16
16-DU 1610-6 16SC16 1 2.547 1.234 1.047 .562 .875 1.594 1-1/2 1-3/8
Union
*NOTE: All dimensions subject to change, to be used for reference only.
24 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
®
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
DUANFDUANFDUANF
T J A B C D E1 L NH BHPART TUBE THREAD THRU NUT BODY
NUMBER INTERCHANGES WITH O.D. HOLE HEX HEX
2-DUANF-2 200-6-2AN 2XASC2 1/8 5/16-24 1.234 .500 .609 .448 .062 .984 7/16 7/16
2-DUANF-4 200-6-4AN 4XASC2 1/8 7/16-20 1.375 .500 .609 .550 .094 1.125 7/16 1/2
3-DUANF-3 300-6-3AN 3XASC3 3/16 3/8-24 1.328 .547 .641 .479 .125 1.062 1/2 7/16
4-DUANF-4 400-6-4AN 4XASC4 1/4 7/16-20 1.484 .609 .703 .550 .172 1.187 9/16 1/2
5-DUANF-5 500-6-5AN 5XASC5 5/16 1/2-20 1.516 .641 .734 .550 .234 1.219 5/8 9/16
6-DUANF-4 600-6-4AN 4XASC6 3/8 7/16-20 1.562 .656 .766 .550 .172 1.266 11/16 5/8
6-DUANF-6 600-6-6AN 6XASC6 3/8 9/16-18 1.562 .656 .766 .556 .297 1.266 11/16 5/8
8-DUANF-8 810-6-8AN 8XASC8 1/2 3/4-16 1.812 .906 .859 .657 .391 1.406 7/8 13/16
10-DUANF-10 1010-6-10AN 10XASC10 5/8 7/8-14 1.937 .969 .875 .758 .484 1.531 1 15/16
12-DUANF-12 1210-6-12AN 12XASC12 3/4 1-1/16-12 2.109 .969 .859 .864 .609 1.703 1-1/8 1-1/8
16-DUANF-16 1610-6-16AN 16XASC16 1 1-5/16-12 2.422 1.234 1.047 .911 .844 1.937 1-1/2 1-3/8
Tube to AN FlareUnion
25For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DELUDELUDELU
T A B C E L NH WPART TUBE THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. HOLE HEX FLAT
1-DELU-1 100-9 1EE1 1/16 .750 .344 .437 .052 .609 5/16 7/16
2-DELU-2 200-9 2EE2 1/8 .875 .500 .609 .094 .625 7/16 3/8
3-DELU-3 300-9 3EE3 3/16 1.000 .547 .625 .125 .734 1/2 1/2
4-DELU-4 400-9 4EE4 1/4 1.062 .609 .703 .187 .766 9/16 1/2
5-DELU-5 500-9 5EE5 5/16 1.125 .640 .734 .250 .844 5/8 9/16
6-DELU-6 600-9 6EE6 3/8 1.203 .656 .766 .281 .906 11/16 5/8
8-DELU-8 810-9 8EE8 1/2 1.421 .906 .859 .406 1.016 7/8 13/16
10-DELU-10 1010-9 10EE10 5/8 1.500 .969 .859 .500 1.109 1 15/16
12-DELU-12 1210-9 12EE12 3/4 1.578 .969 .859 .625 1.171 1-1/8 1-1/16
14-DELU-14 1410-9 14EE14 7/8 1.766 1.016 .859 .718 1.406 1-1/4 1-3/8
16-DELU-16 1610-9 16EE16 1 1.937 1.234 1.047 .875 1.438 1-1/2 1-3/8
Union Elbow
*NOTE: All dimensions subject to change, to be used for reference only.
26 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
®
*NOTE: All dimensions subject to change, to be used for reference only.
DFEDFEDFE
T P A1 A2 B C E L NH WPART TUBE PIPE END THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX FLAT
1-DFE-2 100-8-2 1FEL2N 1/16 1/8 .812 .750 .500 .609 .052 .687 5/16 1/2
2-DFE-2 200-8-2 2FEL2N 1/8 1/8 .969 .750 .500 .609 .094 .719 7/16 1/2
2-DFE-4 200-8-4 2FEL4N 1/8 1/4 1.078 .875 .500 .609 .094 .828 7/16 11/16
3-DFE-2 300-8-2 3FEL2N 3/16 1/8 1.000 .750 .547 .625 .125 .734 1/2 1/2
4-DFE-2 400-8-2 4FEL2N 1/4 1/8 1.062 .750 .609 .703 .187 .781 9/16 1/2
4-DFE-4 400-8-4 4FEL4N 1/4 1/4 1.172 .875 .609 .703 .187 .875 9/16 11/16
4-DFE-6 400-8-6 4FEL6N 1/4 3/8 1.250 .875 .609 .703 .187 .969 9/16 13/16
4-DFE-8 400-8-8 4FEL8N 1/4 1/2 1.359 1.125 .609 .703 .187 1.078 9/16 1
5-DFE-2 500-8-2 5FEL2N 5/16 1/8 1.125 .750 .640 .734 .250 .844 5/8 9/16
5-DFE-4 500-8-4 5FEL4N 5/16 1/4 1.203 .875 .640 .734 .250 .906 5/8 11/16
6-DFE-2 600-8-2 6FEL2N 3/8 1/8 1.203 .750 .656 .766 .281 .906 11/16 5/8
6-DFE-4 600-8-4 6FEL4N 3/8 1/4 1.234 .875 .656 .766 .281 .937 11/16 11/16
6-DFE-6 600-8-6 6FEL6N 3/8 3/8 1.312 .875 .656 .766 .281 1.016 11/16 13/16
6-DFE-8 600-8-8 6FEL8N 3/8 1/2 1.429 1.125 .656 .766 .281 1.125 11/16 1
8-DFE-4 810-8-4 8FEL4N 1/2 1/4 1.429 .875 .906 .859 .406 1.016 7/8 13/16
8-DFE-6 810-8-6 8FEL6N 1/2 3/8 1.429 .875 .906 .859 .406 1.016 7/8 13/16
8-DFE-8 810-8-8 8FEL8N 1/2 1/2 1.531 1.125 .906 .859 .406 1.125 7/8 1
10-DFE-6 1010-8-6 10FEL6N 5/8 3/8 1.500 .875 .969 .859 .500 1.109 1 15/16
10-DFE-8 1010-8-8 10FEL8N 5/8 1/2 1.578 1.125 .969 .859 .500 1.171 1 1-1/16
12-DFE-8 1210-8-8 12FEL8N 3/4 1/2 1.578 1.125 .969 .859 .625 1.171 1-1/8 1-1/16
12-DFE-12 1210-8-12 12FEL12N 3/4 3/4 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8
14-DFE-12 1410-8-12 14FEL12N 7/8 3/4 1.766 1.250 1.016 .859 .718 1.359 1-1/4 1-3/8
16-DFE-12 1610-8-12 16FEL12N 1 3/4 1.937 1.250 1.234 1.049 .875 1.453 1-1/2 1-3/8
16-DFE-16 1610-8-16 16FEL16N 1 1 1.984 1.500 1.234 1.049 .875 1.500 1-1/2 1-11/16
Female Elbow
27For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
DMEDMEDME
T P A1 A2 B C D E1 L NH WPART TUBE PIPE END THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX FLAT
1-DME-1 100-2-1 1MSEL1N 1/16 1/16 .703 .656 .344 .437 .375 .052 .547 5/16 3/8
1-DME-2 100-2-2 1MSEL2N 1/16 1/8 .750 .703 .344 .437 .375 .052 .609 5/16 7/16
2-DME-1 200-2-1 2MSEL1N 1/8 1/16 .937 .703 .500 .609 .375 .094 .672 7/16 7/16
2-DME-2 200-2-2 2MSEL2N 1/8 1/8 .937 .703 .500 .609 .375 .094 .672 7/16 7/16
2-DME-4 200-2-4 2MSEL4N 1/8 1/4 .969 .922 .500 .609 .562 .094 .719 7/16 1/2
2-DME-6 200-2-6 2MSEL6N 1/8 3/8 1.203 1.125 .500 .609 .562 .094 .812 7/16 13/16
3-DME-2 300-2-2 3MSEL2N 3/16 1/8 1.000 .734 .547 .625 .375 .125 .734 1/2 1/2
3-DME-4 300-2-4 3MSEL4N 3/16 1/4 1.000 .922 .547 .625 .562 .125 .734 1/2 1/2
4-DME-1 400-2-1 4MSEL1N 1/4 1/16 1.203 .703 .609 .703 .375 .156 .719 9/16 1/2
4-DME-2 400-2-2 4MSEL2N 1/4 1/8 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2
4-DME-4 400-2-4 4MSEL4N 1/4 1/4 1.062 .922 .609 .703 .562 .187 .766 9/16 1/2
4-DME-6 400-2-6 4MSEL6N 1/4 3/8 1.172 1.031 .609 .703 .562 .187 .875 9/16 11/16
4-DME-8 400-2-8 4MSEL8N 1/4 1/2 1.250 1.297 .609 .703 .750 .187 .969 9/16 13/16
4-DME-12 400-2-12 4MSEL12N 1/4 3/4 1.546 1.500 .609 .703 .750 .187 1.093 9/16 1-1/16
5-DME-2 500-2-2 5MSEL2N 5/16 1/8 1.125 .781 .641 .734 .375 .187 .844 5/8 9/16
5-DME-4 500-2-4 5MSEL4N 5/16 1/4 1.125 .969 .641 .734 .562 .250 .844 5/8 9/16
5-DME-6 500-2-6 5MSEL6N 5/16 3/8 1.203 1.031 .641 .734 .562 .250 .906 5/8 11/16
6-DME-2 600-2-2 6MSEL2N 3/8 1/8 1.203 .812 .656 .766 .375 .187 .906 11/16 5/8
6-DME-4 600-2-4 6MSEL4N 3/8 1/4 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8
6-DME-6 600-2-6 6MSEL6N 3/8 3/8 1.234 1.031 .656 .766 .562 .281 .937 11/16 11/16
28 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Male Elbow
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
®
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
DMEDMEDME
T P A1 A2 B C D E1 L NH WPART TUBE PIPE END THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX FLAT
6-DME-8 600-2-8 6MSEL8N 3/8 1/2 1.312 1.297 .656 .766 .750 .281 1.016 11/16 13/16
6-DME-12 600-2-12 6MSEL12N 3/8 3/4 1.469 1.453 .656 .766 .750 .281 1.172 11/16 1-1/16
8-DME-2 810-2-2 8MSEL2N 1/2 1/8 1.609 1.109 .906 .859 .375 .187 .969 7/8 13/16
8-DME-4 810-2-4 8MSEL4N 1/2 1/4 1.422 1.109 .906 .859 .562 .281 1.016 7/8 13/16
8-DME-6 810-2-6 8MSEL6N 1/2 3/8 1.422 1.109 .906 .859 .562 .375 1.016 7/8 13/16
8-DME-8 810-2-8 8MSEL8N 1/2 1/2 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16
8-DME-12 810-2-12 8MSEL12N 1/2 3/4 1.578 1.453 .906 .859 .750 .406 1.172 7/8 1-1/16
10-DME-4 1010-2-4 10MSEL4N 5/8 1/4 1.498 1.125 .969 .859 .562 .281 1.093 1 1
10-DME-6 1010-2-6 10MSEL6N 5/8 3/8 1.500 1.187 .969 .859 .562 .375 1.109 1 15/16
10-DME-8 1010-2-8 10MSEL8N 5/8 1/2 1.500 1.375 .969 .859 .750 .469 1.109 1 15/16
10-DME-12 1010-2-12 10MSEL12N 5/8 3/4 1.578 1.453 .969 .859 .750 .500 1.172 1 1-1/16
10-DME-16 1010-2-16 10MSEL16N 5/8 1 1.780 1.844 .969 .859 .937 .500 1.375 1 1-1/2
12-DME-4 1210-2-4 12MSEL4N 3/4 1/4 1.576 1.250 .969 .859 .562 .281 1.375 1-1/8 1-1/16
12-DME-6 1210-2-6 12MSEL6N 3/4 3/8 1.576 1.250 .969 .859 .562 .406 1.375 1-1/8 1-1/16
12-DME-8 1210-2-8 12MSEL8N 3/4 1/2 1.561 1.453 .969 .859 .750 .469 1.172 1-1/8 1-1/16
12-DME-12 1210-2-12 12MSEL12N 3/4 3/4 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16
14-DME-12 1410-2-12 14MSEL12N 7/8 3/4 1.766 1.641 1.016 .859 .750 .625 1.359 1-1/4 1-3/8
16-DME-4 1610-2-4 16MSEL4N 1 1/4 1.935 1.375 1.234 1.047 .562 .281 1.531 1-1/2 1-1/2
16-DME-8 1610-2-8 16MSEL8N 1 1/2 1.935 1.562 1.234 1.047 .750 .500 1.531 1-1/2 1-1/2
16-DME-12 1610-2-12 16MSEL12N 1 3/4 1.937 1.641 1.234 1.047 .937 .625 1.453 1-1/2 1-3/8
16-DME-16 1610-2-16 16MSEL16N 1 1 1.937 1.828 1.234 1.047 .937 .875 1.453 1-1/2 1-3/8
29For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Male Elbow
®
DTBWEDTBWEDTBWE
T BW A1 A2 B C D E1 L NH WPART TUBE THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. HOLE HEX FLAT
2-DTBWE-2 200-2-2W 2-1/8 ZELW2 1/8 .405 .922 .719 .516 .609 .344 .094 .656 7/16 1/2
3-DTBWE-2 300-2-2W 3-1/8 ZELW2 3/16 .405 1.016 .734 .547 .641 .375 .125 .734 1/2 1/2
4-DTBWE-2 400-2-2W 4-1/8 ZELW2 1/4 .405 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2
4-DTBWE-4 400-2-4W 4-1/4 ZELW2 1/4 .540 1.062 .937 .609 .703 .562 .187 .766 9/16 1/2
6-DTBWE-4 600-2-4W 6-1/4 ZELW2 3/8 .540 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8
8-DTBWE-6 800-2-6W 8-3/8 ZELW2 1/2 .675 1.375 1.125 .906 .859 .562 .406 .969 7/8 13/16
8-DTBWE-8 810-2-8W 8-1/2 ZELW2 1/2 .840 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16
10-DTBWE-8 1010-2-8W 10-1/2 ZELW2 5/8 .840 1.437 1.312 .969 .859 .750 .500 1.031 1 7/8
12-DTBWE-12 1210-2-12W 12-3/4 ZELW2 3/4 1.050 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16
16-DTBWE-12 1610-2-12W 16-3/4 ZELW2 1 1.050 1.937 1.625 1.234 1.047 .750 .875 1.453 1-1/2 1-5/16
16-DTBWE-16 1610-2-16W 16-1 ZELW2 1 1.315 1.937 1.844 1.234 1.047 .937 .875 1.453 1-1/2 1-5/16
Tube to Butt WeldElbow
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
30 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
DTSWEDTSWEDTSWE
T A1 A2 B C D E F L NH WPART TUBE THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. HOLE HEX FLAT
2-DTSWE-2 200-9-2W 2-2 ZELWZ 1/8 .922 .625 .516 .609 .156 .094 .375 .656 7/16 5/16
3-DTSWE-3 300-9-3W 3-3 ZELWZ 3/16 .984 .687 .547 .641 .203 .125 .437 .719 1/2 7/16
4-DTSWE-4 400-9-4W 4-4 ZELWZ 1/4 1.062 .766 .609 .703 .312 .187 .500 .766 9/16 1/2
6-DTSWE-6 600-9-6W 6-6 ZELWZ 3/8 1.203 .906 .656 .766 .375 .281 .625 .875 11/16 5/8
8-DTSWE-8 810-9-8W 8-8 ZELWZ 1/2 1.422 1.016 .906 .859 .500 .406 .812 1.016 7/8 13/16
10-DTSWE-10 1010-9-10W 10-10 ZELWZ 5/8 1.562 1.156 .969 .875 .500 .500 .937 1.156 1 1-1/16
12-DTSWE-12 1210-9-12W 12-12 ZELWZ 3/4 1.562 1.312 .969 .875 .500 .625 1.094 1.156 1-1/8 1-1/16
16-DTSWE-16 1610-9-16W 16-16 ZELWZ 1 1.937 1.469 1.234 1.047 .562 .875 1.375 1.453 1-1/2 1-5/16
Tube to Socket Weld Elbow
31For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DTFTDTFTDTFT
T P A A1 A2 B C E L NH WPART TUBE PIPE END THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX FLAT
2-DTFT-2 200-3TFT 2FRT2N 1/8 1/8 1.719 .969 .750 .500 .609 .094 .719 7/16 1/2
3-DTFT-2 300-3-2TFT 3FRT2N 3/16 1/8 1.766 1.016 .750 .547 .641 .125 .750 1/2 9/16
4-DTFT-2 400-3TFT 4FRT2N 1/4 1/8 1.812 1.078 .750 .609 .703 .187 .781 9/16 9/16
4-DTFT-4 400-3-4TFT 4FRT4N 1/4 1/4 2.047 1.172 .875 .609 .703 .187 .875 9/16 11/16
5-DTFT-2 500-3-2TFT 5FRT2N 5/16 1/8 1.922 1.172 .750 .641 .734 .250 .875 5/8 5/8
6-DTFT-4 600-3TFT 6FRT4N 3/8 1/4 2.109 1.234 .875 .656 .766 .281 .937 11/16 11/16
8-DTFT-4 810-3-4TFT 8FRT4N 1/2 1/4 2.562 1.437 1.125 .906 .875 .406 1.125 7/8 13/16
8-DTFT-6 810-3TFT 8FRT6N 1/2 3/8 2.297 1.422 .875 .906 .859 .406 1.016 7/8 13/16
8-DTFT-8 810-3-8TFT 8FRT8N 1/2 1/2 2.687 1.578 1.125 .906 .859 .406 1.172 7/8 1-1/16
10-DTFT-8 1010-3-8TFT 10FRT8N 5/8 1/2 2.656 1.531 1.125 .969 .875 .500 1.125 1 1-1/16
12-DTFT-12 1210-3-TFT 12FRT12N 3/4 3/4 3.016 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8
14-DTFT-12 1410-3-12TFT 14FRT12N 7/8 3/4 3.016 1.766 1.250 1.031 .875 .750 1.359 1-1/4 1-5/16
16-DTFT-12 1610-3-12TFT 16FRT12N 1 3/4 3.187 1.937 1.250 1.234 1.047 .875 1.453 1-1/2 1-5/16
16-DTFT-16 1610-3TFT 16FRT16N 1 1 3.516 2.016 1.500 1.234 1.047 .875 1.531 1-1/2 1-5/8
Female Run Tee
*NOTE: All dimensions subject to change, to be used for reference only.
32 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
DTMTDTMTDTMT
T P A A1 A2 B C D E1 L NH WPART TUBE PIPE END THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX FLAT
2-DTMT-2 200-3TMT 2MRT2N 1/8 1/8 1.625 .937 .703 .500 .609 .375 .094 .672 7/16 7/16
3-DTMT-2 300-3TMT 3MRT2N 3/16 1/8 1.656 .969 .703 .547 .625 .375 .125 .703 1/2 7/16
4-DTMT-2 400-3TMT 4MRT2N 1/4 1/8 1.797 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2
4-DTMT-4 400-3-4TMT 4MRT4N 1/4 1/4 1.984 1.062 .922 .609 .703 .562 .187 .766 9/16 5/8
5-DTMT-2 500-3TMT 5MRT2N 5/16 1/8 1.984 1.172 .828 .641 .725 .375 .187 .875 5/8 5/8
6-DTMT-4 600-3TMT 6MRT4N 3/8 1/4 2.203 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8
6-DTMT-6 600-3-6TMT 6MRT6N 3/8 3/8 2.422 1.312 1.109 .656 .766 .562 .281 1.016 11/16 13/16
8-DTMT-6 810-3TMT 8MRT6N 1/2 3/8 2.531 1.422 1.109 .906 .859 .562 .406 1.016 7/8 13/16
8-DTMT-8 810-3-8TMT 8MRT8N 1/2 1/2 2.719 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16
10-DTMT-8 1010-3TMT 10MRT8N 5/8 1/2 2.875 1.500 1.375 .969 .859 .750 .469 1.109 1 15/16
12-DTMT-12 1210-3TMT 12MRT12N 3/4 3/4 3.016 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16
14-DTMT-12 1410-3-12TMT 14MRT12N 7/8 3/4 3.266 1.766 1.500 1.031 .875 .750 .750 1.359 1-1/4 1-5/16
16-DTMT-12 1610-3-12TMT 16MRT12N 1 3/4 3.609 1.937 1.656 1.234 1.047 .750 .875 1.453 1-1/2 1-5/16
16-DTMT-16 1610-3-16TMT 16MRT16N 1 1 3.781 1.937 1.844 1.234 1.047 .937 .875 1.453 1-1/2 1-5/16
Male Run Tee
33For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DTTFDTTFDTTF
T P A A1 A2 B C E L NH WPART TUBE PIPE END THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX FLAT
2-DTTF-2 200-3TTF 2FBT2N 1/8 1/8 1.937 .969 .750 .500 .609 .094 .719 7/16 1/2
3-DTTF-2 300-3-2TTF 3FBT2N 3/16 1/8 2.016 1.016 .750 .547 .641 .125 .750 1/2 1/2
4-DTTF-2 400-3TTF 4FBT2N 1/4 1/8 2.125 1.062 .750 .609 .703 .187 .766 9/16 1/2
4-DTTF-4 400-3-4TTF 4FBT4N 1/4 1/4 2.344 1.172 .875 .609 .703 .187 .875 9/16 11/16
5-DTTF-2 500-3-2TTF 5FBT2N 5/16 1/8 2.344 1.172 .750 .641 .734 .250 .875 5/8 5/8
6-DTTF-4 600-3TTF 6FBT4N 3/8 1/4 2.469 1.234 .875 .656 .766 .281 .937 11/16 11/16
8-DTTF-4 810-3-4TTF 8FBT4N 1/2 1/4 2.844 1.422 .875 .906 .859 .406 1.016 7/8 13/16
8-DTTF-6 810-3TTF 8FBT6N 1/2 3/8 2.844 1.422 .875 .906 .859 .406 1.016 7/8 13/16
8-DTTF-8 810-3-8TTF 8FBT8N 1/2 1/2 3.062 1.531 1.125 .906 .859 .406 1.125 7/8 1
10-DTTF-8 1010-3TTF 10FBT8N 5/8 1/2 3.062 1.531 1.125 .969 .859 .500 1.125 1 1
12-DTTF-12 1210-3TTF 12FBT12N 3/4 3/4 3.516 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8
14-DTTF-12 1410-3-12TTF 14FBT12N 7/8 3/4 3.016 1.766 1.250 1.031 .875 .750 1.359 1-1/4 1-5/16
16-DTTF-12 1610-3-12TTF 16FBT12N 1 3/4 3.859 1.937 1.250 1.234 1.047 .875 1.453 1-1/2 1-3/8
16-DTTF-16 1610-3TTF 16FBT16N 1 1 3.969 1.984 1.500 1.234 1.047 .875 1.500 1-1/2 1-11/16
Female Branch Tee
*NOTE: All dimensions subject to change, to be used for reference only.
34 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DTTMDTTMDTTM
T P A A1 A2 B C D E1 L NH WPART TUBE PIPE END THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. NPT HOLE HEX FLAT
2-DTTM-2 200-3TTM 2MBT2N 1/8 1/8 1.859 .937 .703 .500 .609 .375 .094 .672 7/16 7/16
2-DTTM-4 200-3-4TTM 2MBT4N 1/8 1/4 1.937 .969 .922 .500 .609 .562 .094 .719 7/16 1/2
3-DTTM-2 300-3TTM 3MBT2N 3/16 1/8 1.922 .969 .703 .547 .625 .375 .125 .703 1/2 7/16
4-DTTM-2 400-3TTM 4MBT2N 1/4 1/8 2.125 1.062 .734 .609 .703 .375 .187 .765 9/16 1/2
4-DTTM-4 400-3-4TTM 4MBT4N 1/4 1/4 2.125 1.062 .922 .609 .703 .562 .187 .765 9/16 1/2
5-DTTM-2 500-3TTM 5MBT2N 5/16 1/8 2.344 1.172 .828 .641 .725 .375 .187 .875 5/8 5/8
6-DTTM-4 600-3TTM 6MBT4N 3/8 1/4 2.406 1.203 1.000 .656 .765 .562 .281 .906 11/16 5/8
6-DTTM-6 600-3-6TTM 6MBT6N 3/8 3/8 2.625 1.312 1.109 .656 .765 .562 .281 1.016 11/16 13/16
8-DTTM-6 810-3TTM 8MBT6N 1/2 3/8 2.844 1.422 1.109 .906 .859 .562 .375 1.016 7/8 13/16
8-DTTM-8 810-3-8TTM 8MBT8N 1/2 1/2 2.844 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16
10-DTTM-8 1010-3TTM 10MBT8N 5/8 1/2 3.062 1.531 1.406 .969 .859 .750 .469 1.125 1 1
12-DTTM-12 1210-3TTM 12MBT12N 3/4 3/4 3.141 1.172 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16
14-DTTM-12 1410-3-12TTM 14MBT12N 7/8 3/4 3.516 1.766 1.500 1.031 .875 .750 .750 1.359 1-1/4 1-3/8
16-DTTM-12 1610-3-12TTM 16MBT12N 1 3/4 3.875 1.937 1.656 1.234 1.047 .750 .875 1.453 1-1/2 1-1/2
16-DTTM-16 1610-3-16TTM 16MBT16N 1 1 3.875 1.937 1.656 1.234 1.047 .937 .875 1.453 1-1/2 1-5/16
Male Branch Tee
35For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
DTTTDTTTDTTT
T A A1 B C E L NH WPART TUBE THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. HOLE HEX FLAT
1-DTTT-1 100-3 1ET1 1/16 1.406 .703 .344 .437 .052 .547 5/16 3/8
2-DTTT-2 200-3 2ET2 1/8 1.766 .875 .500 .609 .094 .625 7/16 3/8
3-DTTT-3 300-3 3ET3 3/16 1.922 .969 .547 .625 .125 .703 1/2 7/16
4-DTTT-4 400-3 4ET4 1/4 2.125 1.062 .609 .703 .187 .766 9/16 1/2
5-DTTT-5 500-3 5ET5 5/16 2.344 1.172 .641 .734 .250 .875 5/8 5/8
6-DTTT-6 600-3 6ET6 3/8 2.406 1.203 .656 .766 .281 .906 11/16 5/8
8-DTTT-8 810-3 8ET8 1/2 2.844 1.422 .906 .859 .406 1.016 7/8 13/16
10-DTTT-10 1010-3 10ET10 5/8 3.062 1.531 .969 .859 .500 1.125 1 1
12-DTTT-12 1210-3 12ET12 3/4 3.141 1.578 .969 .859 .625 1.172 1-1/8 1-1/16
14-DTTT-14 1410-3 14ET14 7/8 3.516 1.766 1.016 .859 .718 1.359 1-1/4 1-3/8
16-DTTT-16 1610-3 16ET16 1 3.859 1.937 1.234 1.047 .875 1.453 1-1/2 1-3/8
Union Tee
*NOTE: All dimensions subject to change, to be used for reference only.
36 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
®
*NOTE: All dimensions subject to change, to be used for reference only.
*All tube ends are typical.
DCRDCRDCR
T A A1 B C E L NH WPART TUBE THRU NUT WRENCH
NUMBER INTERCHANGES WITH O.D. HOLE HEX FLAT
2-DCR 200-4 2ECR2 1/8 1.766 .875 .500 .609 .094 .625 7/16 3/8
4-DCR 400-4 4ECR4 1/4 2.125 1.062 .609 .703 .187 .766 9/16 1/2
5-DCR 500-4 5ECR5 5/16 2.344 1.172 .641 .734 .250 .875 5/8 5/8
6-DCR 600-4 6ECR6 3/8 2.406 1.203 .656 .766 .281 .906 11/16 5/8
8-DCR 810-4 8ECR8 1/2 2.844 1.422 .906 .859 .406 1.016 7/8 13/16
12-DCR 1210-4 12ECR12 3/4 3.016 1.516 .969 .859 .625 1.109 1-1/8 1-1/16
16-DCR 1610-4 16ECR16 1 3.687 1.844 1.234 1.047 .875 1.359 1-1/2 1-3/8
Union Cross
37For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DBIDBIDBI
PART INTERCHANGES T W A E F LNUMBER WITH TUBE O.D. REF. THRU HOLE TUBE I.D.
3-DBI-030 305-2 3/16 .031 .566 .062 1/8 .518
4-DBI-022 405-2 1/4 .022 .566 .141 13/64 .518
4-DBI-031 405-3 1/4 .031 .566 .125 3/16 .518
4-DBI-040 405-170 1/4 .040 .566 .109 11/64 .518
4-DBI-062 1/4 .062 .566 .062 1/8 .518
5-DBI-031 505-4 5/16 .031 .566 .187 1/4 .518
5-DBI-062 505-3 5/16 .062 .566 .125 3/16 .518
5-DBI-094 505-2 5/16 .094 .566 .062 1/8 .518
5-DBI-103 5/16 .103 .566 .045 7/64 .518
6-DBI-049 3/8 .049 .566 .218 9/32 .518
6-DBI-062 605-4 3/8 .062 .566 .187 1/4 .518
6-DBI-094 605-3 3/8 .094 .566 .125 3/16 .518
6-DBI-159 3/8 .159 .566 .032 1/16 .518
8-DBI-035 1/2 .035 .750 .375 7/16 .702
8-DBI-049 1/2 .049 .750 .344 13/32 .702
8-DBI-062 815-6 1/2 .062 .750 .312 3/8 .702
8-DBI-125 815-4 1/2 .125 .750 .187 1/4 .702
10-DBI-049 5/8 .049 .750 .469 17/32 .702
10-DBI-062 1015-8 5/8 .062 .750 .437 1/2 .702
10-DBI-125 1015-6 5/8 .125 .750 .312 3/8 .702
10-DBI-187 5/8 .187 .750 .187 1/4 .702
12-DBI-049 3/4 .049 .750 .562 21/32 .702
12-DBI-062 1215-10 3/4 .062 .750 .562 5/8 .702
12-DBI-125 1215-8 3/4 .125 .750 .437 1/2 .702
14-DBI-049 7/8 .049 1.031 .687 25/32 .938
14-DBI-062 7/8 .062 1.031 .687 3/4 .938
14-DBI-125 7/8 .125 1.031 .562 5/8 .938
16-DBI-062 1615-14 1 .062 1.031 .812 7/8 .938
16-DBI-125 1615-12 1 .125 1.031 .687 3/4 .938
Barbed Insert
*NOTE: All dimensions subject to change, to be used for reference only.
38 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
DPIDPIDPI
PART T W A E F LNUMBER INTERCHANGES WITH TUBE O.D. REF. THRU HOLE TUBE I.D.
3-DPI-030 3 TIZ (.125) 3/16 .031 .566 .062 1/8 .518
4-DPI-022 1/4 .022 .566 .140 13/64 .518
4-DPI-031 4 TIZ (.188) 1/4 .031 .566 .125 3/16 .518
4-DPI-040 4 TIZ (.170) 1/4 .040 .566 .109 11/64 .518
5-DPI-062 5 TIZ (.188) 5/16 .062 .566 .125 3/16 .518
5-DPI-094 5 TIZ (.125) 5/16 .094 .566 .062 1/8 .518
6-DPI-049 3/8 .049 .566 .218 9/32 .518
6-DPI-062 6 TIZ (.250) 3/8 .062 .566 .187 1/4 .518
6-DPI-094 6 TIZ (.188) 3/8 .094 .566 .125 3/16 .518
8-DPI-035 1/2 .035 .750 .375 7/16 .702
8-DPI-049 1/2 .049 .750 .344 13/32 .702
8-DPI-062 8 TIZ (.375) 1/2 .062 .750 .312 3/8 .702
8-DPI-125 8 TIZ (.250) 1/2 .125 .750 .187 1/4 .702
10-DPI-049 5/8 .049 .750 .469 17/32 .702
10-DPI-062 10 TIZ (.500) 5/8 .062 .750 .437 1/2 .702
10-DPI-125 10 TIZ (.375) 5/8 .125 .750 .312 3/8 .702
12-DPI-049 3/4 .049 .750 .562 21/32 .702
12-DPI-062 12 TIZ (.625) 3/4 .062 .750 .562 5/8 .702
12-DPI-125 12 TIZ (.500) 3/4 .125 .750 .437 1/2 .702
14-DPI-049 7/8 .049 1.000 .687 25/32 .952
14-DPI-062 7/8 .062 1.000 .687 3/4 .952
14-DPI-125 7/8 .125 1.000 .562 5/8 .952
16-DPI-050 1 .050 1.000 .843 57/64 .952
16-DPI-062 16 TIZ (.875) 1 .062 1.000 .812 7/8 .952
16-DPI-125 16 TIZ (.750) 1 .125 1.000 .687 3/4 .952
Plane Insert
39For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
DN/DKNDN/DKNDN/DKN
PART T A NHNUMBER INTERCHANGES WITH TUBE O.D. NUT HEX
DN-1 102-1 1NU1 1/16 .312 5/16
DN-2 202-1 2NU2 1/8 .469 7/16
DN-3 302-1 3NU3 3/16 .469 1/2
DN-4 402-1 4NU4 1/4 .500 9/16
DN-5 502-1 5NU5 5/16 .531 5/8
DN-6 602-1 6NU6 3/8 .562 11/16
DN-8 812-1 8NU8 1/2 .687 7/8
DN-10 1012-1 10NU10 5/8 .687 1
DN-12 1212-1 12NU12 3/4 .687 1-1/8
DN-14 1412-1 14NU14 7/8 .687 1-1/4
DN-16 1612-1 16NU16 1 .812 1-1/2
Nut
Knurled Nut
*NOTE: All dimensions subject to change, to be used for reference only.
40 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
The knurled nut is used with fittings where applications of a finger tight assembly is acceptable. Common applications include, but are not limited to, low pressure laboratory use on plastic tubing.
Knurled nuts are available in the same sizes as shown for CBC-Lok® nuts (DN). The knurled nut part descriptor is DKN. For example, the part number for a 1/2" knurled nut is SS-DKN-8.
PART QUANTITYNUMBER INTERCHANGES WITH TUBE O.D. (per arbor)
DCSET-4-10 400 Sets-10 4-ALOK-SS-SET 1/4
DCSET-6-10 600 Sets-10 6-ALOK-SS-SET 3/8 10
DCSET-8-10 800 Sets-10 8-ALOK-SS-SET 1/2
DCSET-12-10 1210 Sets-10 12-ALOK-SS-SET 3/4
DCSET-16-10 1610 Sets-10 16-ALOK-SS-SET 1
Collet Sets contain 10 collets on an arbor.1/2" Collet Set part number: SS-DCSET-8-10
Nut/Collet Sets contain 5 nuts & 5 collets on an arbor. 1/2" Nut/Collet Set part number: SS-DNCSET-8-5
PART QUANTITYNUMBER TUBE O.D. (per arbor)
DNCSET-4-5 1/4
DNCSET-6-5 3/8 5
DNCSET-8-5 1/2
DNCSET-12-5 3/4
DNCSET-16-5 1
COLLETSDFC/DRC/DCSET/DNCSETDFC/DRC/DCSET/DNCSET
Front Collet(Ferrule)
Rear Collet(Ferrule)
41For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
PART TNUMBER INTERCHANGES WITH TUBE O.D.
DFC-1 103-1 1FF1 1/16DFC-2 203-1 2FF2 1/8DFC-3 303-1 3FF3 3/16DFC-4 403-1 4FF4 1/4DFC-5 503-1 5FF5 5/16DFC-6 603-1 6FF6 3/8DFC-8 813-1 8FF8 1/2DFC-10 1013-1 10FF10 5/8DFC-12 1213-1 12FF12 3/4DFC-14 1413-1 14FF14 7/8DFC-16 1613-1 16FF16 1
PART TNUMBER INTERCHANGES WITH TUBE O.D.
DRC-1 104-1 1BF1 1/16DRC-2 204-1 2BF2 1/8DRC-3 304-1 3BF3 3/16DRC-4 404-1 4BF4 1/4DRC-5 504-1 5BF5 5/16DRC-6 604-1 6BF6 3/8DRC-8 814-1 8BF8 1/2DRC-10 1014-1 10BF10 5/8DRC-12 1214-1 12BF12 3/4DRC-14 1414-1 14BF14 7/8DRC-16 1614-1 16BF16 1
*NOTE: All dimensions subject to change, to be used for reference only.
Collet sets and Nut/Collet sets make for easy storage and handling of nuts and collets. CBC-Lok® component partsare precision made and should be handled with care. The components can be ordered on an arbor, which aids incareful handling and prevents them from coming off. Pinch the end of the arbor to release the components.
Component Replacement Parts
*NOTE: All dimensions subject to change, to be used for reference only.
Nut/Collet Sets
Collet Sets
The Instrument Tee may be ordered with any standard tube or pipe size. When ordering, specifysizes in the following order:1. Tube Size O.D2. Female Pipe Size3. Male Pipe SizeExample: 1/2" tube, 3/8" female pipe, 1/4" male pipe.
SS-8-DTFM-6-4
A Thermocouple Connector can be furnished alreadybored through for an additional charge. When ordering:1. Select required size male connector. See
pages 14 and 15 for a listing of available Male Connectors.
2. Add the letters “BT” to designate borethrough. Example: 4-DMC-2-BT
The Heat Exchanger Tee may be ordered in anystandard tube size. The process tube is boredthrough. When ordering, specify sizes in the followingorder:1. Jacket Tube O.D2. Process Tube O.D. followed by “BT” for bore
through designation3. Branch Tube O.D.Example: 1/2" tube, 1/4" tube bored through, 1/2"
tube. SS-8-DTTT-4BT-8
Tylube™ is an anti-gall compound to be used on stainless steel, steel andnickel based alloys. Temperature range to 500°F. Not recommended for plastic and aluminum products.Tylube™ is made from distilled water with inert ingredients and contains no silicones, heavy metals, chlorine or sulfur. For a complete list of ingredients request an MSDS to be sure of its compatibility with yourinstallation. Available in 8 oz.plastic bottles.
Instrument Tee
Thermocouple Bore Through
Heat Exchanger Tee
Tylube™ Thread Lubricant
TYLOKTYLOKTYLOK
42 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
TYLOKTYLOKTYLOK
43For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
CBC-Lok® Tube Fittings come completely assembled and ready for use, no dissassemby required. Although thereare some general guide lines to follow no special preparation of the tubing is necessary, reference page 44. Inoverhead applications Tylok recommends using a Pre-Set Tool, see page 47.
Tighten nut with wrench an additional number of turnsindicated above, while holding the fitting body with asecond wrench.
CBC-Lok® Installation Instructions
Simply insert the tubing into the assembly makingsure the tubing seats firmly against the shoulder ofthe body and the nut is finger tight.
Size Tighten # Turn(s)1 1/16"2 1/8" 3/43 3/16"4 1/4"5 5/16"6 3/8"8 1/2" 1-1/410 5/8"12 3/4"14 7/8"16 1"
To Remove Tube and Re-Connect Tube FittingMark the location of the nut with reference to the body before disassembly. For reassembly, re-insert the tubinginto the body until it is seated. With proper size wrench, retighten nut to original location by realigning previousmarks. A noticeable amount of torque will develop when the nut is turned to original position. Next, rotate the nutslightly past original position to fully re-set the seal.
Mark the location of the nut with reference to the body. Back off the nut until it is clear of the body and removethe tubing from the fitting.
Size #1 Thru #3 Size #4 Thru #16(1/16" – 3/16") (1/4" – 1")
Finger Tight Plus Finger Tight Plus3/4 Turn 1-1/4 Turns
CBC-Lok® Tubing Selection & Preparation
75,000 PSI Tensile
Stainless SteelTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120
1/8" 8400 106003/16" 5500 7000 101001/4" 4000 5100 7500 101005/16" 4100 5900 80003/8" 3300 4800 66001/2" 2600 3800 5100 67005/8" 3000 4000 5200 61003/4" 2500 3300 4300 5000 58007/8" 2100 2800 3600 4200 49001" 2400 3200 3700 4200 4700
47,000 PSI Tensile
Carbon SteelTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120
1/8" 8100 102003/16" 5200 6700 96001/4" 3800 4900 7100 96005/16" 3800 5500 76003/8" 3100 4500 62001/2" 2300 3300 4500 60005/8" 2600 3500 4600 53503/4" 2200 2900 3800 4400 51007/8" 1800 2500 3200 3700 43001" 2100 2800 3200 3700 4200
SUGGESTED ALLOWABLE WORKINGPRESSURE TABLES (psig)
It is the responsibility of the Engineer to refer to thetechnical pages in this catalog to ensure selection ofthe proper tubing material, tubing compatibility withthe fitting, media and tubing wall thickness. Followingthe stated recommendations will ensure a safe application, free of leaks. The entire system must be considered when selecting the tube.
Note: For welded and drawn tubing, a derating factor must be utilized.For double welded tube, multiply the above pressure rating by .85;and for single welded tube by .80 (ANSI B 31, Table A-1B).
30,000 PSI Tensile
CopperTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120
1/8" 2700 36003/16" 1800 2300 35001/4" 1300 1700 2500 36005/16" 1300 2000 28003/8" 1100 1600 23001/2" 800 1200 1700 22005/8" 900 1300 1700 19003/4" 800 1000 1400 1600 19007/8" 600 900 1100 1300 16001" 600 800 1000 1200 1400 1500
Proper selection of tubing is key to the performance ofthe fitting. When selecting the proper wall thickness andmaterial, all tubing should be compatible with theprocess fluid, temperature, application, flow and system pressure.
For proper sealing it is recommended that the tubingand fitting be of like material to allow for positive sealing(i.e., stainless on stainless, brass on copper, steel onsteel). Galvanic corrosion could occur if the tubing andfitting are not of like material, with the exception of abrass fitting on copper tubing.
When using stainless steel tubing, Tylok recommendsusing Type 304 or 316 fully annealed, seamless or welded redrawn meeting ASTM-A-213, ASTM-A-269 orequivalent, with a suggested maximum hardness of 80 Rb.
For copper tubing, Tylok suggests using soft annealed,seamless tubing per ASTM-B75 or equivalent. Copperwater tube type K or L, soft annealed (Temper O) perASTM-B88 can also be used.
When using carbon steel, all tubing should be fullyannealed and conform to ASTM-A-179, or equivalent,with a maximum hardness of 72 Rb.
In general, all tubing should be free of nicks, scratches,imperfections of any kind and be suitable for bending.Out of round tubing that does not easily go throughfitting components should not be used. It isrecommended that the charts be used for tube selection.Ideally, the tube end should be cut square so that whenit bottoms out inside the fitting an extra seal is provided.Avoid installing contaminated tubing into your system.For elevated temperatures see page 46.
CBC-Lok® Tube Fittings swage the tubing to achieve itsseals. Thin wall tubing (wall thicknesses with workingpressures highlited in reverse text, in the charts) is notrecommended for Gas Service. For Gas Service seepage 45.
When using tubing of a thinner or thicker wall thanshown, it is always recommended that you consult withyour local Distributor or contact Tylok Internationaldirectly if there is any doubt selecting tubing.
Values in reverse text are not recommended for Gas Service.
Note: Tables, calculated to the right, are suggested maximum workingpressure ratings, in accordance with ASME B31.3, but should be usedfor reference only. Tylok International, Inc., is not responsible for itsaccuracy nor designs using these figures. All compatible Tylok fittingswill withstand pressures above those listed for maximum tubing working pressures.
TYLOKTYLOKTYLOK
44 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
TYLOKTYLOKTYLOK
45For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Gap Gages can be purchased to ensure the Installerand Inspector that the nut has been properly tightened. Available upon request.
When fitting is properly tightened, gap gage shouldnot fit between nut and shoulder of body.
• Never connect, disconnect or remake a fitting with pressure in the system
• Make sure all fittings are properly installed, referenceInstallation Instructions - page 43, before pressurizingthe system
• Tubing material should be softer than fitting material
• Tylok recommends using Tylok replacement parts
• Although the fittings will hold to the pressure ratingof the tubing, it is not recommended to go beyondthis rating. Elongation could occur in the tubing,shrinking the wall thickness and causing potentialharm to anyone in the area
• Always use proper thread lubricants and sealantson tapered pipe threads
• If process fluids are toxic and/or hazardous, exerciseextra caution
• Never bleed a system by loosening a fitting
• For proper sealing it is recommended that the tubing and fitting be of like material
All components are manufactured and inspected tomeet strict quality control standards in each phase ofproduction. All employees are thoroughly trained tofollow rigid procedures, in accordance with the ISO9001:2000 Quality Standard, to ensure a quality product from the start of each job through completion.At Tylok our primary concern is quality, reliability andservice to our customers.
Gap Gages
Safety Guidelines
Quality Control
Extra care must be taken when tubing is used in gasservice applications. Small gas molecules easilyescape through minute leak paths, therefore, the tubingmust be free of nicks, scratches and imperfections ofany kind. In particular, when using large diameter tubingthe possibility of surface defects is increased due togreater surface area. It is strongly recommended thatthe heavier wall thick nesses be selected. Penetrationof the ferrules on thin wall tubing or soft material maynot offer enough radial resistance for sealing. In suchcases, Tylok recommends using a Plane Insert (Partdescriptor DPI, page 39). In the tables on page 44note the suggested allowable working pressure for gas service.
CBC-Lok® Tube Fittings with weld ends offer the same positive sealing as all other Tylok fittings.Welding could deform the assembly, making pull upsor disassembly difficult. Some precautions should betaken...
• Remove the nut and ferrules from the fitting
• It is important that the fitting threads and sealingsurfaces be protected from weld splatter
• A heat sink should be used to dissipate heat
• Ensure alignment by tack welding symmetrically
• Once welded, remove the weld splatter protectionand reassemble nut and ferrules on fitting
Tylok offers a leak detector, Tyspy, for use in allsealing applications. Tyspy meets standard MIL-L-25567D, Sect. 4.4.9 for use on oxygen systems.Availiable in 1 pt. spray bottles. Specify number ofbottles needed when ordering. Part Number: TYSPY
• All temperature formula: -55°F to 200°F
• Ultra-sensitive
• Long-lasting bubbles
• Available in spray bottle
• Fluorescent for improved visibility
• Safe for oxygen systems
• Non-corrosive, non-toxic
Part Number Tube Size Part Number Tube Size#1-DGG 1/16" #8-DGG 1/2"#2-DGG 1/8" #10-DGG 5/8"#3-DGG 3/16" #12-DGG 3/4"#4-DGG 1/4" #14-DGG 7/8"#5-DGG 5/16" #16-DGG 1"#6-DGG 3/8"
Gas Service
Precautions for Weld Ends
Tyspy Leak Detector
Values in reverse text are not recommended for Gas Service.
Tylok Pipe Fittings are manufactured from materials meeting applicable ASTM or ASME specifications, with pipethreads which meet or exceed ANSI B1.20.1 requirements. Strict quality control procedures are followedthroughout production. All parts are individually inspected to provide the finest possible product.
Materials: Brass n 316 Stainless Steel n Steel
Suggested Maximum Operating Pressures for Male Pipe Threads
Suggested Maximum Operating Pressures for Female Pipe Threads
These charts are to be used as a guide only and are based on normal wall thicknesses, used for the various sizes. These ratings may vary widely from effectssuch as the proper use of sealants, size of stock, temperature, corrosion factors, etc. Therefore, Tylok International, Inc., assumes no responsibility for its accuracyin any individual design.
Pipe Thread Specifications
Temperature Ratings
MNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16" 10,100 5,700 10,5001/8" 9,200 5,300 9,8001/4" 7,500 4,100 8,0003/8" 7,250 4,000 7,7001/2" 6,900 3,900 7,3003/4" 6,600 3,700 7,0001" 5,000 2,700 5,000
FNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16" 6,200 3,500 6,8001/8" 6,000 3,400 6,6001/4" 6,100 3,300 6,5003/8" 5,000 2,700 5,4001/2" 4,700 2,500 4,8003/4" 4,300 2,400 4,6001" 4,100 2,300 4,500
Tylok Instrumentation Fittings are rated at the following temperatures:
316 Stainless -325°F to 1200°F Brass -40°F to 400°F Steel -65°F to 400°F(-198°C to 648°C) (-40°C to 204°C) (-54°C to 204°C)
Note: Consideration should be given to maximum temperature ratings if fittings and/or tubing are coated or plated.
The following table lists derating factors that must be considered in applications above that of ambient temperatures.
ExampleType 316 Stainless Steel 1/4" O.D. x .049" wall at800°F is…
7,500 PSI x .80 = 6,000 PSI
Therefore, the suggested allowable workingpressure for 316 Stainless Steel - 1/4" O.D. with.049" tube wall - at 800°F is 6,000 PSI.
These charts are to be used as a guide only and are based on normal wallthicknesses, used for the various sizes. These ratings may vary widely fromeffects such as the proper use of sealants, size of stock, temperature,corrosion factors, etc. Therefore, Tylok International, Inc., assumes noresponsibility for its accuracy in any individual design.
Tube Pressure Derating Factors at Elevated Temperatures
TYLOKTYLOKTYLOK
46 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Temperatures Multiplier Factors304 316 Carbon
°F °C SS SS Copper Steel200 93 1.00 1.00 .80 .95400 204 .94 .97 .50 .86600 315 .82 .85 .77800 427 .76 .80 .59
1000 538 .69 .771200 649 .30 .37
TYLOKTYLOKTYLOK
47For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
CBC-Lok® Tube Fittings are completely heat code traceable back to the original mill heat from which it was made.Starting with the original billet, the mill creates a certificate which completely describes the chemical and physicalmakeup. For any one of the four components (body, front ferrule, rear ferrule, nut) the material certifications can beprovided when calling Tylok and giving the heat code stamp marked on the part itself, along with the part number.
Heat Traceability
Raw Material Specifications
Tylok Pre-Setting Tool
Place Pre-Setting Tool in a vice and tighten nut specified number of turns.
Back nut off of Pre-Setting Tool. Notice the ferrules have swaged into the tubing. Now take tubing to installation area.
Part Number Tube Size
#1-DPST 1/16"#2-DPST 1/8"#3-DPST 3/16"#4-DPST 1/4"#5-DPST 5/16"#6-DPST 3/8"#8-DPST 1/2"
#10-DPST 5/8"#12-DPST 3/4"#14-DPST 7/8"#16-DPST 1"
Fitting Bar *Tubing Maximum SpecificationMaterial Stock Forging Specification Hardness (Tubing)
ASTM-B16 Alloy 360 ASTM-B75 60 Max.Brass ASTM-B453 Alloy 345 ASTM-B124 Alloy 377 Copper Rockwell 15T
(Temper O)
StainlessASTM-A276
ASME-SA-182 ASTM-A213Steel
ASME-SA-479Type 316-SS ASTM-A269
90 RbType 316-SS
Steel ASTM-A108 ASTM-A179 72 Rb
The CBC-Lok® product line offers a Pre-Setting Toolwhen fittings need to be installed in hard to reachplaces. The Pre-Setting Tool is designed to be usedin any tabletop vice. After tightening the nut thespecified number of turns, as stated in the includedinstallation instructions, loosen the nut from the Pre-Setting Tool. Once the ferrules have swaged into thetubing surface, the assembly is ready for installation.
When ordering the CBC-Lok® Pre-Set Tool, referencethe part number in the chart. The Pre-Set Tool ishardened for maximum durability. The Pre-Set Toolcan be used repeatedly to set the ferrules onto thetubing for easy installation.
*Reference Tubing Selection & Preparation, page 44.
For pre-cutting tubing to length, the following chart shows the additional length inside the fitting assembly.
Tube Insertion Chart
Tube Size T Tube O.D. B Dimension
#1 1/16 .34#2 1/8 .51#3 3/16 .54#4 1/4 .60#5 5/16 .64#6 3/8 .67#8 1/2 .90#10 5/8 .96#12 3/4 .96#14 7/8 1.03#16 1.0 1.24
*NOTE: All Dimensions Subject to Change.
Tubing–General Applications
CBC-Lok® Tube Fittings are designed to perform in a variety of applications that demand high performance. The CBC-Lok® product line has been engineered to provide optimal performance, however tubing should always be considered as an important factor in the design stages of any system. Below is a table that describes somegeneral uses for different types of materials. The table is provided as a reference to the Engineer in the designprocess.
Tylok suggests the use of seamless, fully annealed tubing. Welded tubing may be used with Tylok fittings. However,due to the manufacturing of welded tubing, variables may be encountered. The media flowing through the tubingmust be compatible with the tubing itself. It is always a good rule to use like tubing material on like fitting material. If this format is not followed, the ferrules may have difficulty penetrating the tubing causing an adverse affect on thesealing ability. In addition, dissimilar materials in contact may be sensitive to galvanic corrosion. Tylok recommendsordering tubing material to meet ASTM specifications to ensure that it will be dimensionally, physically and chemicallywithin precise limits (see Raw Material Specifications chart - page 47).
Tube Insertion DepthFinger Tight
Tubing RecommendedMaterial General Applications Temperature Range
Carbon Steel Air Lines, High Pressure, High Temperature, -20°F to 400°F*Oil, Air, Specialty Chemicals, Hydraulic Gases
Copper Low Temperature, Low Pressure Water, Oil, -40°F to 400°FAir, Pneumatic Controls, Lube Lines
Stainless Steel High Pressure, High Temperature, Nitrogen, -20°F to 1000°FHelium, Flammable Gases, Hydraulic, Gases,generally corrosive media
TYLOKTYLOKTYLOK
48 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*Based on 400°F maximum.
TYLOKTYLOKTYLOK
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
NoticeIn designing a system incorporating tube fittings and valves, it is the designer’s or user’s obligation and responsibility to determine the appropriate fittings and valves to be used foreach application, and to insure proper installation and maintenance.
Limited WarrantyTylok fittings and valves are warranted solely against defects in material and workmanship inthe performance of the specific functions for which they are designed, as set forth in the pub-lished specifications for a period of 12 months. Should any fitting and valve or its componentfail due to a defect in material or workmanship, Tylok will replace said fitting and valve withoutcharge upon return of the failed part and evidence of its failure being due to materials or work-manship.
The Warranty above set forth is the only warranty applicable to Tylok products, and is in lieu ofany and all other warranties either express or implied, including any warranty of merchantabilityor fitness. Tylok’s sole responsibility or liability as a result of any loss or damage due to failureshall be to replace the failed part or fitting and valve, and it shall bear no liability for any inci-dental or consequential damages to person or property.
© 2006 Tylok International, Inc.All rights reserved.Litho in U.S.A.
Our HistoryIn the mid 1940s, Cullen Crawford founded the
Crawford Fitting Company. Mr. Crawford developed and
patented the original flareless fitting (nut and two ferrule
system), for the Crawford Fitting Company. Thus, a new and
innovative industry was born making it far easier to make
tubing connections. This reduces installation time and errors.
Since his invention, End Users from all four corners of the globe
have made billions of connections. This system provides leak
proof seals and thus Mr. Crawford has been named “The founder
of the flareless fitting.”
Our MissionIt is our mission, at Tylok International, Inc., to continuously
strive for and achieve total customer satisfaction with both
our products and services.
Our GoalTylok’s aggressive goal is to establish ourselves as
an industry leader and expand our market share.
This is maintained in every department within
the organization. Our “total effort” will
guard against losing the personal touch
that makes our business enjoyable
and prosperous for all involved.
INSTRUMENTATION
TUBE FITTINGS
Tylok Standard
CBC-Lok®
CS-Lok®
PIPE FITTINGS
WELD FITTINGS
BALL VALVES
• Ty-Flo® HP Series
• Ty-Flo® 3 Piece
NEEDLE VALVES
MANIFOLDS
FLEXIBLE METAL HOSE
1061 East 260th Street • Euclid, Ohio 44132Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317
www.tylok.comCBC-Lok Tube Fittings Catalog Doc. 72305 Rev. G
Ty-Flo® 3 Piece Ball Valves are ordered as listed in this catalogby inserting the material code before the part number.Ty-Flo® 3 Piece Ball Valves can be identified through thepart number as to material, end sizes, end configuration,seat and seal type, and special options. The standard Ball& Stem are in stainless steel unless otherwise requested.
Example: A Stainless Steel, 3/4" inlet to 3/4" outlet,3 piece ball valve, with CBC-Lok Instrumentation TubeEnds, Reinforced Teflon Seats and Seals, with thefollowing option: ASME B16.34 compliant is designatedas follows...
SS - 12 - 5 TT - 12 - R R - KMaterial Inlet Size Style Description Outlet Size Seats Seals OptionsChart 1 Chart 2 Chart 3 Chart 4 Chart 2 Chart 5 Chart 6 Chart 7
HOW TO ORDERHow to OrderHow to Order
Chart 1 -MATERIALBody & Ends MaterialSS Stainless Steel
Chart 3 - STYLE5 3 Piece Ball Valve, 2 way,
bi-directional flow
Chart 4 - DESCRIPTIONCode End Description Size Range
BB Butt Weld 1/4" – 1"EE Extended Butt Weld 1/4" – 1"– IPS ButtWeld Sched. 5 (WW), Sched. 10 (XX), Sched. 40 (YY) 1/4" – 1"II Pipe Socket Weld 1/4" – 1"CC Clamp 1/4" – 4"FF Female NPT 1/4" – 4"GG Female BSPT 1/4" – 4"TT Instrumentation Tube End (CBC-Lok) 1/4" – 1"RR 150# Raised Face Flange 1/4" – 1"QQ 300# Raised Face Flange 1/4" – 1"ZZ Instrumentation Tube End (CS-Lok) 1/4" – 1"
Chart 2 - VALVE SIZEDesignator Valve Size
4 1/4"6 3/8"8 1/2"12 3/4"16 1"
Other sizes upon request.
Chart 6 - SEALSR Reinforced PTFEG GraphoilM PTFE – TFM®
B BunaV VitonP PEEK
Chart 5 - SEATST TeflonM PTFE – TFM®
R Reinforced PTFED DelrinN NovaC Teflon Cavity FilledF PTFE – TFM® Cavity FilledP PEEK
Chart 7 - OPTIONSA Electro Polish G Purge Port Female NPTB 240 Grit / 15-20 RA* I Oval HandleC 320 Grit / 9-11 RA* J Silicon FreeD Purge Port Tube End K ASME B16.34 CompliantE Purge Port Instrumentation End L Full PortF Purge Port Male NPT Oxygen Cleaning**
Teflon® and Viton® are registered trademarksof E.I. DuPont.Tri-Clamp® is a registered trademark ofTri Clover.
Due to continuous development of ourproduct range we reserve the right tochange the dimensions and informationcontained in the leaflet as required.
Doc. 72308 Rev. F
International, Inc.1061 East 260th Street • Euclid, Ohio 44132 • Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317
www.tylok.com • [email protected]
3 Piece Valve Actuator
A Complete Range ofExtended SocketWeld Tailpieces
TY-FLO® HP Series Ball ValvesPressure Ratings: 1,500 PSI and 5,000 PSI
CS-LOK® Tube FittingsCS-Lok® Tube Fittings are fully interchangeablewith Parker CPI®.
CBC-LOK® Tube FittingsCBC-Lok® Tube Fittings are fully interchangeablewith Swagelok® and Parker A-Lok®.
TYLOK International carries a comprehensive range of high-quality fluid components tocompliment the TY-FLO® 3 Piece Ball Valve product line. Featured below are several popularTYLOK product lines to meet your fluid control needs.
Manifold &Needle Valves
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
OTHER PRODUCTSOther ProductsOther Products
*Electro Polish not including Instrumentation Tube Ends.**Oxygen Cleaning & Packaging: Special cleaning and packaging is available to meet product cleanlinessrequirements of ASTM G93 Level C. Contact authorized Tylok representative for more information.
TY-FLO® 3 Piece Ball Valves
Ty-Flo® 3 Piece Ball Valves are ordered as listed in this catalogby inserting the material code before the part number.Ty-Flo® 3 Piece Ball Valves can be identified through thepart number as to material, end sizes, end configuration,seat and seal type, and special options. The standard Ball& Stem are in stainless steel unless otherwise requested.
Example: A Stainless Steel, 3/4" inlet to 3/4" outlet,3 piece ball valve, with CBC-Lok Instrumentation TubeEnds, Reinforced Teflon Seats and Seals, with thefollowing option: ASME B16.34 compliant is designatedas follows...
SS - 12 - 5 TT - 12 - R R - KMaterial Inlet Size Style Description Outlet Size Seats Seals OptionsChart 1 Chart 2 Chart 3 Chart 4 Chart 2 Chart 5 Chart 6 Chart 7
HOW TO ORDERHow to OrderHow to Order
Chart 1 -MATERIALBody & Ends MaterialSS Stainless Steel
Chart 3 - STYLE5 3 Piece Ball Valve, 2 way,
bi-directional flow
Chart 4 - DESCRIPTIONCode End Description Size Range
BB Butt Weld 1/4" – 1"EE Extended Butt Weld 1/4" – 1"– IPS ButtWeld Sched. 5 (WW), Sched. 10 (XX), Sched. 40 (YY) 1/4" – 1"II Pipe Socket Weld 1/4" – 1"CC Clamp 1/4" – 4"FF Female NPT 1/4" – 4"GG Female BSPT 1/4" – 4"TT Instrumentation Tube End (CBC-Lok) 1/4" – 1"RR 150# Raised Face Flange 1/4" – 1"QQ 300# Raised Face Flange 1/4" – 1"ZZ Instrumentation Tube End (CS-Lok) 1/4" – 1"
Chart 2 - VALVE SIZEDesignator Valve Size
4 1/4"6 3/8"8 1/2"12 3/4"16 1"
Other sizes upon request.
Chart 6 - SEALSR Reinforced PTFEG GraphoilM PTFE – TFM®
B BunaV VitonP PEEK
Chart 5 - SEATST TeflonM PTFE – TFM®
R Reinforced PTFED DelrinN NovaC Teflon Cavity FilledF PTFE – TFM® Cavity FilledP PEEK
Chart 7 - OPTIONSA Electro Polish G Purge Port Female NPTB 240 Grit / 15-20 RA* I Oval HandleC 320 Grit / 9-11 RA* J Silicon FreeD Purge Port Tube End K ASME B16.34 CompliantE Purge Port Instrumentation End L Full PortF Purge Port Male NPT Oxygen Cleaning**
Teflon® and Viton® are registered trademarksof E.I. DuPont.Tri-Clamp® is a registered trademark ofTri Clover.
Due to continuous development of ourproduct range we reserve the right tochange the dimensions and informationcontained in the leaflet as required.
Doc. 72308 Rev. F
International, Inc.1061 East 260th Street • Euclid, Ohio 44132 • Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317
www.tylok.com • [email protected]
3 Piece Valve Actuator
A Complete Range ofExtended SocketWeld Tailpieces
TY-FLO® HP Series Ball ValvesPressure Ratings: 1,500 PSI and 5,000 PSI
CS-LOK® Tube FittingsCS-Lok® Tube Fittings are fully interchangeablewith Parker CPI®.
CBC-LOK® Tube FittingsCBC-Lok® Tube Fittings are fully interchangeablewith Swagelok® and Parker A-Lok®.
TYLOK International carries a comprehensive range of high-quality fluid components tocompliment the TY-FLO® 3 Piece Ball Valve product line. Featured below are several popularTYLOK product lines to meet your fluid control needs.
Manifold &Needle Valves
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
OTHER PRODUCTSOther ProductsOther Products
*Electro Polish not including Instrumentation Tube Ends.**Oxygen Cleaning & Packaging: Special cleaning and packaging is available to meet product cleanlinessrequirements of ASTM G93 Level C. Contact authorized Tylok representative for more information.
TY-FLO® 3 Piece Ball Valves
Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M OR A216 WCB2 2 TAILPIECE ASTM A351 GR CF3M OR A216 WCB3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B8(M2-SS) OR A193 B7(M2-CS)13 1 HANDLE STOP 304SS
SIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque(PORT) NPTF & EXTEND DIA PATTERN LBS. RTFE PEEK
STD. SW SW IN-LBS IN-LBS1/2" RP 0.43 2.7 6.0 2.5 4.0 1.71 1.08 0.31 0.197 0.31 1.42 1/4"-20UNC 0.38 F03 1.7 10 1003/4" RP 0.57 3.0 7.0 2.6 4.0 1.83 1.24 0.31 0.197 0.31 1.42 1/4"-20UNC 0.50 F03 2.2 25 2001" RP 0.81 3.5 7.5 3.0 4.8 2.34 1.50 0.37 0.276 0.44 1.65 1/4"-20UNC 0.50 F04 3.8 42 2301-1/4" RP 0.98 3.9 8.0 3.4 5.8 2.69 1.81 0.40 0.315 0.50 1.65 1/4"-20UNC 0.50 F04 5.1 55 2501-1/2" RP 1.25 4.5 8.0 3.7 7.5 2.91 1.95 0.43 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 7.1 85 3802" RP 1.50 5.0 9.0 3.9 7.5 3.15 2.26 0.35 0.394 0.62 1.97 1/4"-20UNC 0.62 F05 9.8 120 5202-1/2" RP 2.00 6.9 N/A 5.3 11.7 4.37 3.11 0.49 0.472 0.75 2.76 5/16"-18UNC N/A F07 20.8 300 660 950
1/4"-3/8" FP 0.43 2.7 N/A 2.5 4.0 1.71 1.08 0.31 0.197 0.31 1.42 1/4"-20UNC N/A F03 1.7 10 1001/2" FP 0.57 2.8 7.0 2.6 4.0 1.83 1.24 0.31 0.197 0.31 1.42 1/4"-20UNC 0.38 F03 2.2 16 2003/4" FP 0.81 3.2 7.5 3.0 4.8 2.34 1.50 0.37 0.276 0.44 1.65 1/4"-20UNC 0.50 F04 3.8 40 2301" FP 1.00 3.8 8.0 3.4 5.8 2.69 1.81 0.40 0.315 0.50 1.65 1/4"-20UNC 0.50 F04 5.1 62 2501-1/4" FP 1.25 4.3 8.0 3.7 7.5 2.91 1.95 0.43 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 7.1 115 3801-1/2" FP 1.50 4.8 9.0 3.9 7.5 3.15 2.26 0.35 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 9.8 140 5202" FP 2.00 5.7 10.0 5.3 11.7 4.37 3.11 0.49 0.472 0.75 2.76 5/16"-18UNC 0.62 F07 20.8 360 660 950
DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUE
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.comFor Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M2 2 TAILPIECE ASTM A351 GR CF3M3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B8(M2-SS)13 1 HANDLE STOP 304SS
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
FEATURES• 3-Piece, 8-Bolt construction providessuperior high pressure performance andASME B16.34 compliance• Fire safe to API 607 4th Edition & ISO 10497• ISO 5211 4-Bolt actuator mounting pad• API 608 compliant• NACE MR01-75 Rev 2000 compliant• Standard 304SS latch lock handles• Standard ASTM A193 grade B8stainless bolts• TFM seats provide superior high temperatureperformance and chemical resistance• PEEK seats and seals available
RatingsCF8M with 316SS Trim: 1920PSIG @ 100F
250PSIG Saturated Steam Rating
D
DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUESIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque
(PORT) NO WITH DIA BALL PATTERN LBS. RTFE PEEKNUTS NUTS PORT IN-LBS IN-LBS
1/4" 0.15 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 1.0 100 1303/8" 0.24 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 2.5 100 1301/2" 0.41 3.26 4.04 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.8 7.5 100 1303/4" 0.57 3.26 4.04 2.6 4.0 1.83 1.24 .30 0.197 0.31 1.42 1/4"-20UNC .57 F03 2.2 18.0 200 2501" 0.81 4.39 5.36 3.0 4.8 2.34 1.50 .37 0.276 0.40 1.65 1/4"-20UNC .81 F04 3.8 40.0 230 300
Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M2 2 TAILPIECE ASTM A351 GR CF3M3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B813 1 HANDLE STOP 304SS
FEATURES• 3-Piece, 8-Bolt construction provides superiorhigh pressure performance• Fire safe to API 607 4th Edition & ISO 10497• ISO 5211 4-Bolt actuator mounting pad• NACE MR01-75 Rev 2000 compliant• Standard 304SS latch lock handles• Standard ASTM A193 grade B8 stainless bolts• TFM seats provide superior high temperatureperformance and chemical resistance• PEEK seats and seals available• Highest working pressure ratings - 3000WOG• Minimum 3.2 to 1 hydrostatic safety factors
RatingsCF8M with 316SS Trim: 3000PSIG @ 100F
250PSIG Saturated Steam Rating
DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUESIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque
(PORT) NO WITH DIA BALL PATTERN LBS. RTFE PEEKNUTS NUTS PORT IN-LBS IN-LBS
1/4" 0.19 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 1.2 100 1303/8" 0.28 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 3.8 100 1301/2" 0.41 3.26 4.04 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.8 7.5 100 1303/4" 0.57 3.26 4.04 2.6 4.0 1.83 1.24 .30 0.197 0.31 1.42 1/4"-20UNC .57 F03 2.2 18.0 200 2501" 0.81 4.39 5.36 3.0 4.8 2.34 1.50 .37 0.276 0.40 1.65 1/4"-20UNC .81 F04 3.8 40.0 230 300 0° 100° 200° 300° 400° 500°
TEMPERATURE ºF
2000
1000
50
PR
ES
SU
RE
-P
SIG
ASME B16.34 CLASS800 BODY RATING
PEEKRTFE
RatingsWCB/T316: 1973 PSIG @ 100°FCF8M/T316: 1920 PSIG @ 100°F
All Sizes: 200 PSIG WSP
FEATURES• 3-Piece, 8 Bolt Construction• ASME B16.34, Class 800 Compliant• API 608 Compliant• Fire Safe to API 607 4th Edition &ISO 10497• NACE MR01-75 Compliant• ISO 5211 4 Bolt Mounting• Standard 316SS Ball & Stem• Standard 304SS Latch Lock Handles• 1/4"-2" Full Port, 1/2"-2-1/2"Reduced Port• Extended Socket Weld Ends Available
3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves 3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves 3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves
1ASME B16.34
Compliant
23000 PSIG
Rated
3ASME B16.34
Compliant
D
Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M OR A216 WCB2 2 TAILPIECE ASTM A351 GR CF3M OR A216 WCB3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B8(M2-SS) OR A193 B7(M2-CS)13 1 HANDLE STOP 304SS
SIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque(PORT) NPTF & EXTEND DIA PATTERN LBS. RTFE PEEK
STD. SW SW IN-LBS IN-LBS1/2" RP 0.43 2.7 6.0 2.5 4.0 1.71 1.08 0.31 0.197 0.31 1.42 1/4"-20UNC 0.38 F03 1.7 10 1003/4" RP 0.57 3.0 7.0 2.6 4.0 1.83 1.24 0.31 0.197 0.31 1.42 1/4"-20UNC 0.50 F03 2.2 25 2001" RP 0.81 3.5 7.5 3.0 4.8 2.34 1.50 0.37 0.276 0.44 1.65 1/4"-20UNC 0.50 F04 3.8 42 2301-1/4" RP 0.98 3.9 8.0 3.4 5.8 2.69 1.81 0.40 0.315 0.50 1.65 1/4"-20UNC 0.50 F04 5.1 55 2501-1/2" RP 1.25 4.5 8.0 3.7 7.5 2.91 1.95 0.43 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 7.1 85 3802" RP 1.50 5.0 9.0 3.9 7.5 3.15 2.26 0.35 0.394 0.62 1.97 1/4"-20UNC 0.62 F05 9.8 120 5202-1/2" RP 2.00 6.9 N/A 5.3 11.7 4.37 3.11 0.49 0.472 0.75 2.76 5/16"-18UNC N/A F07 20.8 300 660 950
1/4"-3/8" FP 0.43 2.7 N/A 2.5 4.0 1.71 1.08 0.31 0.197 0.31 1.42 1/4"-20UNC N/A F03 1.7 10 1001/2" FP 0.57 2.8 7.0 2.6 4.0 1.83 1.24 0.31 0.197 0.31 1.42 1/4"-20UNC 0.38 F03 2.2 16 2003/4" FP 0.81 3.2 7.5 3.0 4.8 2.34 1.50 0.37 0.276 0.44 1.65 1/4"-20UNC 0.50 F04 3.8 40 2301" FP 1.00 3.8 8.0 3.4 5.8 2.69 1.81 0.40 0.315 0.50 1.65 1/4"-20UNC 0.50 F04 5.1 62 2501-1/4" FP 1.25 4.3 8.0 3.7 7.5 2.91 1.95 0.43 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 7.1 115 3801-1/2" FP 1.50 4.8 9.0 3.9 7.5 3.15 2.26 0.35 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 9.8 140 5202" FP 2.00 5.7 10.0 5.3 11.7 4.37 3.11 0.49 0.472 0.75 2.76 5/16"-18UNC 0.62 F07 20.8 360 660 950
DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUE
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.comFor Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M2 2 TAILPIECE ASTM A351 GR CF3M3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B8(M2-SS)13 1 HANDLE STOP 304SS
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
FEATURES• 3-Piece, 8-Bolt construction providessuperior high pressure performance andASME B16.34 compliance• Fire safe to API 607 4th Edition & ISO 10497• ISO 5211 4-Bolt actuator mounting pad• API 608 compliant• NACE MR01-75 Rev 2000 compliant• Standard 304SS latch lock handles• Standard ASTM A193 grade B8stainless bolts• TFM seats provide superior high temperatureperformance and chemical resistance• PEEK seats and seals available
RatingsCF8M with 316SS Trim: 1920PSIG @ 100F
250PSIG Saturated Steam Rating
D
DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUESIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque
(PORT) NO WITH DIA BALL PATTERN LBS. RTFE PEEKNUTS NUTS PORT IN-LBS IN-LBS
1/4" 0.15 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 1.0 100 1303/8" 0.24 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 2.5 100 1301/2" 0.41 3.26 4.04 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.8 7.5 100 1303/4" 0.57 3.26 4.04 2.6 4.0 1.83 1.24 .30 0.197 0.31 1.42 1/4"-20UNC .57 F03 2.2 18.0 200 2501" 0.81 4.39 5.36 3.0 4.8 2.34 1.50 .37 0.276 0.40 1.65 1/4"-20UNC .81 F04 3.8 40.0 230 300
Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M2 2 TAILPIECE ASTM A351 GR CF3M3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B813 1 HANDLE STOP 304SS
FEATURES• 3-Piece, 8-Bolt construction provides superiorhigh pressure performance• Fire safe to API 607 4th Edition & ISO 10497• ISO 5211 4-Bolt actuator mounting pad• NACE MR01-75 Rev 2000 compliant• Standard 304SS latch lock handles• Standard ASTM A193 grade B8 stainless bolts• TFM seats provide superior high temperatureperformance and chemical resistance• PEEK seats and seals available• Highest working pressure ratings - 3000WOG• Minimum 3.2 to 1 hydrostatic safety factors
RatingsCF8M with 316SS Trim: 3000PSIG @ 100F
250PSIG Saturated Steam Rating
DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUESIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque
(PORT) NO WITH DIA BALL PATTERN LBS. RTFE PEEKNUTS NUTS PORT IN-LBS IN-LBS
1/4" 0.19 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 1.2 100 1303/8" 0.28 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 3.8 100 1301/2" 0.41 3.26 4.04 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.8 7.5 100 1303/4" 0.57 3.26 4.04 2.6 4.0 1.83 1.24 .30 0.197 0.31 1.42 1/4"-20UNC .57 F03 2.2 18.0 200 2501" 0.81 4.39 5.36 3.0 4.8 2.34 1.50 .37 0.276 0.40 1.65 1/4"-20UNC .81 F04 3.8 40.0 230 300 0° 100° 200° 300° 400° 500°
TEMPERATURE ºF
2000
1000
50
PR
ES
SU
RE
-P
SIG
ASME B16.34 CLASS800 BODY RATING
PEEKRTFE
RatingsWCB/T316: 1973 PSIG @ 100°FCF8M/T316: 1920 PSIG @ 100°F
All Sizes: 200 PSIG WSP
FEATURES• 3-Piece, 8 Bolt Construction• ASME B16.34, Class 800 Compliant• API 608 Compliant• Fire Safe to API 607 4th Edition &ISO 10497• NACE MR01-75 Compliant• ISO 5211 4 Bolt Mounting• Standard 316SS Ball & Stem• Standard 304SS Latch Lock Handles• 1/4"-2" Full Port, 1/2"-2-1/2"Reduced Port• Extended Socket Weld Ends Available
3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves 3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves 3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves
1ASME B16.34
Compliant
23000 PSIG
Rated
3ASME B16.34
Compliant
D
Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M OR A216 WCB2 2 TAILPIECE ASTM A351 GR CF3M OR A216 WCB3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B8(M2-SS) OR A193 B7(M2-CS)13 1 HANDLE STOP 304SS
SIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque(PORT) NPTF & EXTEND DIA PATTERN LBS. RTFE PEEK
STD. SW SW IN-LBS IN-LBS1/2" RP 0.43 2.7 6.0 2.5 4.0 1.71 1.08 0.31 0.197 0.31 1.42 1/4"-20UNC 0.38 F03 1.7 10 1003/4" RP 0.57 3.0 7.0 2.6 4.0 1.83 1.24 0.31 0.197 0.31 1.42 1/4"-20UNC 0.50 F03 2.2 25 2001" RP 0.81 3.5 7.5 3.0 4.8 2.34 1.50 0.37 0.276 0.44 1.65 1/4"-20UNC 0.50 F04 3.8 42 2301-1/4" RP 0.98 3.9 8.0 3.4 5.8 2.69 1.81 0.40 0.315 0.50 1.65 1/4"-20UNC 0.50 F04 5.1 55 2501-1/2" RP 1.25 4.5 8.0 3.7 7.5 2.91 1.95 0.43 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 7.1 85 3802" RP 1.50 5.0 9.0 3.9 7.5 3.15 2.26 0.35 0.394 0.62 1.97 1/4"-20UNC 0.62 F05 9.8 120 5202-1/2" RP 2.00 6.9 N/A 5.3 11.7 4.37 3.11 0.49 0.472 0.75 2.76 5/16"-18UNC N/A F07 20.8 300 660 950
1/4"-3/8" FP 0.43 2.7 N/A 2.5 4.0 1.71 1.08 0.31 0.197 0.31 1.42 1/4"-20UNC N/A F03 1.7 10 1001/2" FP 0.57 2.8 7.0 2.6 4.0 1.83 1.24 0.31 0.197 0.31 1.42 1/4"-20UNC 0.38 F03 2.2 16 2003/4" FP 0.81 3.2 7.5 3.0 4.8 2.34 1.50 0.37 0.276 0.44 1.65 1/4"-20UNC 0.50 F04 3.8 40 2301" FP 1.00 3.8 8.0 3.4 5.8 2.69 1.81 0.40 0.315 0.50 1.65 1/4"-20UNC 0.50 F04 5.1 62 2501-1/4" FP 1.25 4.3 8.0 3.7 7.5 2.91 1.95 0.43 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 7.1 115 3801-1/2" FP 1.50 4.8 9.0 3.9 7.5 3.15 2.26 0.35 0.394 0.62 1.97 1/4"-20UNC 0.50 F05 9.8 140 5202" FP 2.00 5.7 10.0 5.3 11.7 4.37 3.11 0.49 0.472 0.75 2.76 5/16"-18UNC 0.62 F07 20.8 360 660 950
DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUE
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.comFor Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M2 2 TAILPIECE ASTM A351 GR CF3M3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B8(M2-SS)13 1 HANDLE STOP 304SS
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
FEATURES• 3-Piece, 8-Bolt construction providessuperior high pressure performance andASME B16.34 compliance• Fire safe to API 607 4th Edition & ISO 10497• ISO 5211 4-Bolt actuator mounting pad• API 608 compliant• NACE MR01-75 Rev 2000 compliant• Standard 304SS latch lock handles• Standard ASTM A193 grade B8stainless bolts• TFM seats provide superior high temperatureperformance and chemical resistance• PEEK seats and seals available
RatingsCF8M with 316SS Trim: 1920PSIG @ 100F
250PSIG Saturated Steam Rating
D
DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUESIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque
(PORT) NO WITH DIA BALL PATTERN LBS. RTFE PEEKNUTS NUTS PORT IN-LBS IN-LBS
1/4" 0.15 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 1.0 100 1303/8" 0.24 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 2.5 100 1301/2" 0.41 3.26 4.04 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.8 7.5 100 1303/4" 0.57 3.26 4.04 2.6 4.0 1.83 1.24 .30 0.197 0.31 1.42 1/4"-20UNC .57 F03 2.2 18.0 200 2501" 0.81 4.39 5.36 3.0 4.8 2.34 1.50 .37 0.276 0.40 1.65 1/4"-20UNC .81 F04 3.8 40.0 230 300
Materials of Construction (STD)PART QUANTITY DESCRIPTION STANDARD MATERIAL1 1 BODY ASTM A351 GR CF8M2 2 TAILPIECE ASTM A351 GR CF3M3 1 BALL ASTM A276 GR 316 OR CF8M4 1 STEM ASTM A276 GR 316 OR CF8M5 2 SEAT TFM (RTFE)6 1 THRUST WASHER TFM (RTFE)7 1 PACKING SET GRAPHITE8 2 BODY SEAL GRAPHITE9 1 PACKING NUT ASTM A276 GR 316 SS10 1 HANDLE NUT 304SS11 1 HANDLE ASSY 304SS12 8 BODY BOLT A193 B813 1 HANDLE STOP 304SS
FEATURES• 3-Piece, 8-Bolt construction provides superiorhigh pressure performance• Fire safe to API 607 4th Edition & ISO 10497• ISO 5211 4-Bolt actuator mounting pad• NACE MR01-75 Rev 2000 compliant• Standard 304SS latch lock handles• Standard ASTM A193 grade B8 stainless bolts• TFM seats provide superior high temperatureperformance and chemical resistance• PEEK seats and seals available• Highest working pressure ratings - 3000WOG• Minimum 3.2 to 1 hydrostatic safety factors
RatingsCF8M with 316SS Trim: 3000PSIG @ 100F
250PSIG Saturated Steam Rating
DIMENSIONS,WEIGHTS, CV FACTORS&MAXIMUMOPERATING TORQUESIZE A B B C D E F G H J K L M ISO WT. CV Torque Torque
(PORT) NO WITH DIA BALL PATTERN LBS. RTFE PEEKNUTS NUTS PORT IN-LBS IN-LBS
1/4" 0.19 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 1.2 100 1303/8" 0.28 2.60 3.19 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.7 3.8 100 1301/2" 0.41 3.26 4.04 2.5 4.0 1.71 1.08 .30 0.197 0.31 1.42 1/4"-20UNC .43 F03 1.8 7.5 100 1303/4" 0.57 3.26 4.04 2.6 4.0 1.83 1.24 .30 0.197 0.31 1.42 1/4"-20UNC .57 F03 2.2 18.0 200 2501" 0.81 4.39 5.36 3.0 4.8 2.34 1.50 .37 0.276 0.40 1.65 1/4"-20UNC .81 F04 3.8 40.0 230 300 0° 100° 200° 300° 400° 500°
TEMPERATURE ºF
2000
1000
50
PR
ES
SU
RE
-P
SIG
ASME B16.34 CLASS800 BODY RATING
PEEKRTFE
RatingsWCB/T316: 1973 PSIG @ 100°FCF8M/T316: 1920 PSIG @ 100°F
All Sizes: 200 PSIG WSP
FEATURES• 3-Piece, 8 Bolt Construction• ASME B16.34, Class 800 Compliant• API 608 Compliant• Fire Safe to API 607 4th Edition &ISO 10497• NACE MR01-75 Compliant• ISO 5211 4 Bolt Mounting• Standard 316SS Ball & Stem• Standard 304SS Latch Lock Handles• 1/4"-2" Full Port, 1/2"-2-1/2"Reduced Port• Extended Socket Weld Ends Available
3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves 3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves 3 PIECE BALL VALVESTY-FLO® 3 Piece Ball ValvesTY-FLO® 3 Piece Ball Valves
1ASME B16.34
Compliant
23000 PSIG
Rated
3ASME B16.34
Compliant
D
Ty-Flo® 3 Piece Ball Valves are ordered as listed in this catalogby inserting the material code before the part number.Ty-Flo® 3 Piece Ball Valves can be identified through thepart number as to material, end sizes, end configuration,seat and seal type, and special options. The standard Ball& Stem are in stainless steel unless otherwise requested.
Example: A Stainless Steel, 3/4" inlet to 3/4" outlet,3 piece ball valve, with CBC-Lok Instrumentation TubeEnds, Reinforced Teflon Seats and Seals, with thefollowing option: ASME B16.34 compliant is designatedas follows...
SS - 12 - 5 TT - 12 - R R - KMaterial Inlet Size Style Description Outlet Size Seats Seals OptionsChart 1 Chart 2 Chart 3 Chart 4 Chart 2 Chart 5 Chart 6 Chart 7
HOW TO ORDERHow to OrderHow to Order
Chart 1 -MATERIALBody & Ends MaterialSS Stainless Steel
Chart 3 - STYLE5 3 Piece Ball Valve, 2 way,
bi-directional flow
Chart 4 - DESCRIPTIONCode End Description Size Range
BB Butt Weld 1/4" – 1"EE Extended Butt Weld 1/4" – 1"– IPS ButtWeld Sched. 5 (WW), Sched. 10 (XX), Sched. 40 (YY) 1/4" – 1"II Pipe Socket Weld 1/4" – 1"CC Clamp 1/4" – 4"FF Female NPT 1/4" – 4"GG Female BSPT 1/4" – 4"TT Instrumentation Tube End (CBC-Lok) 1/4" – 1"RR 150# Raised Face Flange 1/4" – 1"QQ 300# Raised Face Flange 1/4" – 1"ZZ Instrumentation Tube End (CS-Lok) 1/4" – 1"
Chart 2 - VALVE SIZEDesignator Valve Size
4 1/4"6 3/8"8 1/2"12 3/4"16 1"
Other sizes upon request.
Chart 6 - SEALSR Reinforced PTFEG GraphoilM PTFE – TFM®
B BunaV VitonP PEEK
Chart 5 - SEATST TeflonM PTFE – TFM®
R Reinforced PTFED DelrinN NovaC Teflon Cavity FilledF PTFE – TFM® Cavity FilledP PEEK
Chart 7 - OPTIONSA Electro Polish G Purge Port Female NPTB 240 Grit / 15-20 RA* I Oval HandleC 320 Grit / 9-11 RA* J Silicon FreeD Purge Port Tube End K ASME B16.34 CompliantE Purge Port Instrumentation End L Full PortF Purge Port Male NPT Oxygen Cleaning**
Teflon® and Viton® are registered trademarksof E.I. DuPont.Tri-Clamp® is a registered trademark ofTri Clover.
Due to continuous development of ourproduct range we reserve the right tochange the dimensions and informationcontained in the leaflet as required.
Doc. 72308 Rev. F
International, Inc.1061 East 260th Street • Euclid, Ohio 44132 • Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317
www.tylok.com • [email protected]
3 Piece Valve Actuator
A Complete Range ofExtended SocketWeld Tailpieces
TY-FLO® HP Series Ball ValvesPressure Ratings: 1,500 PSI and 5,000 PSI
CS-LOK® Tube FittingsCS-Lok® Tube Fittings are fully interchangeablewith Parker CPI®.
CBC-LOK® Tube FittingsCBC-Lok® Tube Fittings are fully interchangeablewith Swagelok® and Parker A-Lok®.
TYLOK International carries a comprehensive range of high-quality fluid components tocompliment the TY-FLO® 3 Piece Ball Valve product line. Featured below are several popularTYLOK product lines to meet your fluid control needs.
Manifold &Needle Valves
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
OTHER PRODUCTSOther ProductsOther Products
*Electro Polish not including Instrumentation Tube Ends.**Oxygen Cleaning & Packaging: Special cleaning and packaging is available to meet product cleanlinessrequirements of ASTM G93 Level C. Contact authorized Tylok representative for more information.
TY-FLO® 3 Piece Ball Valves
Product LineOur HistoryIn the mid 1940s, Cullen Crawford founded theCrawford Fitting Company. Mr. Crawford developedand patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company.Thus, a new and innovative industry was born making itfar easier to make tubing connections. This reducesinstallation time and errors. Since his invention, EndUsers from all four corners of the globe have madebillions of connections. This system provides leakproof seals and thus Mr. Crawford has been named“The founder of the flareless fitting.”
Our MissionIt is our mission, at Tylok International, Inc., tocontinuously strive for and achieve total customersatisfaction with both our products and services.
Our GoalTylok’s aggressive goal is to establishourselves as an industry leader andexpand our market share. This ismaintained in every departmentwithin the organization. Our“total effort” will guard againstlosing the personal touch thatmakes our business enjoyableand prosperous forall involved.
1061 East 260th Street • Euclid, Ohio 44132
Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317
www.tylok.com
FITTINGS
PIP
E
&NEEDLE VALVES
MA
NIF
OLD
PIPE FITTINGSTylok Pipe Fittings are offered in popular configurations suchas reducing adapters, reducing bushings, pipe unions, elbows,tees, crosses, etc.
Fittings are manufactured to the same high quality standards as other TylokFittings. Each fitting is thoroughly cleaned to eliminate system contamination andfeatures an attractive surface finish to enhance the appearance of modernscientific instrumentation and equipment.
Fittings are manufactured from materials meeting applicable ASTM or ASMEspecifications, with pipe threads which meet or exceed ANSI B1.20.1 requirements.Strict quality control procedures are followed throughout production.
Pipe thread connections are very common in today’s industry. They arerelatively easy to work with because of the common sizes and dimensionsthroughout manufacturing. It is important to use a thread sealant.These products range from pipe “dopes” to teflon tape, all of whichcan be purchased through your local Tylok Distributor.
Sizes: Fractional: 1/16" – 1"
Materials: Stainless Steel, Brass and Steel.Additional materials available upon request.
MANIFOLDS AND NEEDLE VALVES2, 3 & 5 Valve Manifolds (Forged and Bar Stock), Distribution Manifolds, Double Blockand Bleed Valves, Needle Valves, Condensing Pots (Welding and Integral), Air Distributors.
Manifolds� 2, 3 & 5 Valve designs
� Available in remote or direct mount design
� Bonnets are locked to prevent accidental disengagement from body
� Standard packing Teflon or Graphoil
� Sour gas service available
� Valve tip features self-centering for sure seal every time
� 6,000 PSI standard rating, 10,000 PSI available
Needle Valves� 6,000 PSI standard rating, 10,000 PSI available
� Bar stock valves in either straight or angle pattern available
� CBC-Lok® Compression ends size range 1/8" – 1"
� FNPT, MNPT end size range 1/4" – 1-1/2"
� Valve tip features self-centering for sure seal every time
Materials: Stainless Steel, Brass and Steel.
Line Card Doc. 72309 Rev. G
FITTINGS
TUB
E VALVES
BA
LL TY-FLO® HP SERIES BALL VALVESStandard seats are Kel-F® and standardseals are Viton. Other materials availableupon request. Operating pressure rangesup to 1,500 PSI with TFE seats, up to 5,000 PSIwith Kel-F® seats. All valves are individually tested.
Orifice Sizes: Series 4 (0.188"), Series 6 (0.250"), Series 8 (0.375")
Typical ends are offered in any combination: Instrumentation tube ends(CBC-Lok,® CS-Lok® or Tylok Standard Tube ends) and Female and Male NPT.
Sizes: Fractional: 1/16" - 1"
Materials: Stainless Steel and Brass.
CBC-LOK® TUBE FITTINGSCBC-Lok® Tube Fittingsare fully interchangeablewith Swagelok® andParker A-Lok®.It features:
� Double collet (ferrule)swaging action
� 2 Positive seal points
� Total component interchangeabilitywith competition
� Ty-Cor™ process applied torear collet (ferrule)
Typical ends include:Instrumentation Tube ends, Female andMale NPT, Butt Weld, Socket Weld,37° flare, BSPP (British Standard Pipe Parallel)and BSPT (British Standard Pipe Taper).
Sizes: Fractional: 1/16" – 1"
Materials: Stainless Steel, Brass and Steel.
� Reliable, simple operationfor on-off service
� Fast acting, one quarter turnfully open to fully closed
� Corrosion resistant
� Maximum performance, straight through flowfor minimum turbulence and pressure drop
� Positive leak tight shut off, even withfluctuating pressures
� Panel mounting capabilities
TY-FLO® 3 PIECE BALL VALVESValves feature:
� 3 Piece, 8-bolt construction provides superior high pressureperformance and ASME B16.34 compliance
� Fire safe to API 607 4th Edition & ISO 10497
� ISO 5211 4-Bolt actuator mounting pad
� API 608 compliant
� NACE MR01-75 Rev 2000 compliant
� Standard 304SS latch lock handles
� Standard ASTM A193 grade B8 stainless bolts
� TFM seats provide superior high temperature performance and chemical resistance
� PEEK seats and seals available
Typical ends include: Instrumentation Tube ends (CBC-Lok & CS Lok), Femaleand Male NPT, Clamp, Butt Weld & Extended Butt Weld, Pipe Socket Weld,IPS Butt Weld Schedule 5, 10 & 40, Raised Face Flange 150# & 300#, etc.
Sizes: Fractional: 1/16" – 1". Other sizes available upon request.
Materials: Stainless Steel and Steel.
Options: Electro Polish, 240 Grit & 320 Grit, Purge Port Ends, Cleaned for Oxygen Service, OvalHandle, Silicon Free.
CS-Lok and CBC-Lok Tube Fittingsare available in all of the configurations
shown above.
CS-LOK® TUBE FITTINGSCS-Lok® Tube Fittingsare fully interchangeablewith Parker CPI®.It features:
� Single ferruleswaging action
� Total component interchangeability
� More tolerant of vibrations
� Heat Code traceable
� ASTM material construction
� Corrosion resistant 316 Stainless Steel Ferrule
Typical ends include: Instrumentation Tube ends, Female and Male NPT, ButtWeld, Socket Weld, 37° flare, BSPP (British Standard Pipe Parallel) and BSPT(British Standard Pipe Taper).
Sizes: Fractional: 1/16" – 1"
Materials: Stainless Steel, Brass and Steel.
THE CREATION OF AN INDUSTRYIn the mid 1940s, Cullen Crawford founded the Crawford Fitting Company.Mr. Crawford developed and patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company. Thus, a new and innovativeindustry was born making it far easier to make tubing connections. This reducesinstallation time and errors. Since his invention, End Users from all four corners of theglobe have made billions of connections. This system provides leak proof seals and thusMr. Crawford has been named “The founder of the flareless fitting.”
SUPERIOR INNOVATIONWell known throughout the fitting industry, Mr. Crawford founded Tylok International, Inc. in the late1950s. Upon request, Mr. Crawford designed a fitting to hold liquid sodium. Having designed andpatented the original flareless fitting, who better to make an improved design? Mr. Crawford knew theproblems better than anyone and, as a result, he developed and patented the Tylok Standard 4 SealTube Fitting, which eliminates problems inherent in his original design.
THE PRESENTMr. Crawford’s legacy lives on through Tylok International. Manufactured in Euclid, Ohio, Tylok’sunique design eliminates common installation problems and provides unparalleled sealing. Allof Tylok’s fitting lines are proudly made in the U.S.A.
FITTING LINES
Tylok International, Inc., presently offers three fitting lines CBC-Lok (double ferrule) &CS-Lok (single ferrule) industry standard designs and the Tylok Standard 4 Seal TubeFitting, a unique and proprietary line based upon Mr. Crawford's improved design.
CBC-Lok® double ferrule tube fittings are completely interchangeable withtube fittings of Swagelok® and Parker A-Lok®.
CS-Lok® single ferrule tube fittings are completely interchangeable withtube fittings of Parker CPI®.
THE FUTUREThe Tylok Design & Development Team is continuously working on newproducts and designs. As a result, our product lines constantly grow to helpservice our Customers.
CUSTOMER CAREAt Tylok, we strive for total satisfaction of our Customers. Your inquirieswill be responded to within 24 hours. Our team features aknowledgeable staff to answer your questions quickly. We have theability to make special items for you at a reasonable price, with fastdelivery. Fast delivery is key to your success. Realizing this, delivery isconstantly being measured via our ISO 9001:2000 QualityManagement System. Our goal is to ship all products from stock tokeep you running.
At Tylok, your Total Satisfaction is our business.
Manitoba/AlbertaCanadian
Registration NumberCertificate No. OA6247.4,OC6248.4 & OA6356.42
REGISTRATIONS& TYPE APPROVALS
ISO 9001:2000Certificate # 012106
Certificate No. 00-C14740-X
FITTINGSTU
BE VALVES
BA
LL TY-FLO® HP SERIES BALL VALVESStandard seats are Kel-F® and standardseals are Viton. Other materials availableupon request. Operating pressure rangesup to 1,500 PSI with TFE seats, up to 5,000 PSIwith Kel-F® seats. All valves are individually tested.
Orifice Sizes: Series 4 (0.188"), Series 6 (0.250"), Series 8 (0.375")
Typical ends are offered in any combination: Instrumentation tube ends(CBC-Lok,® CS-Lok® or Tylok Standard Tube ends) and Female and Male NPT.
Sizes: Fractional: 1/16" - 1"
Materials: Stainless Steel and Brass.
CBC-LOK® TUBE FITTINGSCBC-Lok® Tube Fittingsare fully interchangeablewith Swagelok® andParker A-Lok®.It features:
� Double collet (ferrule)swaging action
� 2 Positive seal points
� Total component interchangeabilitywith competition
� Ty-Cor™ process applied torear collet (ferrule)
Typical ends include:Instrumentation Tube ends, Female andMale NPT, Butt Weld, Socket Weld,37° flare, BSPP (British Standard Pipe Parallel)and BSPT (British Standard Pipe Taper).
Sizes: Fractional: 1/16" – 1"
Materials: Stainless Steel, Brass and Steel.
� Reliable, simple operationfor on-off service
� Fast acting, one quarter turnfully open to fully closed
� Corrosion resistant
� Maximum performance, straight through flowfor minimum turbulence and pressure drop
� Positive leak tight shut off, even withfluctuating pressures
� Panel mounting capabilities
TY-FLO® 3 PIECE BALL VALVESValves feature:
� 3 Piece, 8-bolt construction provides superior high pressureperformance and ASME B16.34 compliance
� Fire safe to API 607 4th Edition & ISO 10497
� ISO 5211 4-Bolt actuator mounting pad
� API 608 compliant
� NACE MR01-75 Rev 2000 compliant
� Standard 304SS latch lock handles
� Standard ASTM A193 grade B8 stainless bolts
� TFM seats provide superior high temperature performance and chemical resistance
� PEEK seats and seals available
Typical ends include: Instrumentation Tube ends (CBC-Lok & CS Lok), Femaleand Male NPT, Clamp, Butt Weld & Extended Butt Weld, Pipe Socket Weld,IPS Butt Weld Schedule 5, 10 & 40, Raised Face Flange 150# & 300#, etc.
Sizes: Fractional: 1/16" – 1". Other sizes available upon request.
Materials: Stainless Steel and Steel.
Options: Electro Polish, 240 Grit & 320 Grit, Purge Port Ends, Cleaned for Oxygen Service, OvalHandle, Silicon Free.
CS-Lok and CBC-Lok Tube Fittingsare available in all of the configurations
shown above.
CS-LOK® TUBE FITTINGSCS-Lok® Tube Fittingsare fully interchangeablewith Parker CPI®.It features:
� Single ferruleswaging action
� Total component interchangeability
� More tolerant of vibrations
� Heat Code traceable
� ASTM material construction
� Corrosion resistant 316 Stainless Steel Ferrule
Typical ends include: Instrumentation Tube ends, Female and Male NPT, ButtWeld, Socket Weld, 37° flare, BSPP (British Standard Pipe Parallel) and BSPT(British Standard Pipe Taper).
Sizes: Fractional: 1/16" – 1"
Materials: Stainless Steel, Brass and Steel.
THE CREATION OF AN INDUSTRYIn the mid 1940s, Cullen Crawford founded the Crawford Fitting Company.Mr. Crawford developed and patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company. Thus, a new and innovativeindustry was born making it far easier to make tubing connections. This reducesinstallation time and errors. Since his invention, End Users from all four corners of theglobe have made billions of connections. This system provides leak proof seals and thusMr. Crawford has been named “The founder of the flareless fitting.”
SUPERIOR INNOVATIONWell known throughout the fitting industry, Mr. Crawford founded Tylok International, Inc. in the late1950s. Upon request, Mr. Crawford designed a fitting to hold liquid sodium. Having designed andpatented the original flareless fitting, who better to make an improved design? Mr. Crawford knew theproblems better than anyone and, as a result, he developed and patented the Tylok Standard 4 SealTube Fitting, which eliminates problems inherent in his original design.
THE PRESENTMr. Crawford’s legacy lives on through Tylok International. Manufactured in Euclid, Ohio, Tylok’sunique design eliminates common installation problems and provides unparalleled sealing. Allof Tylok’s fitting lines are proudly made in the U.S.A.
FITTING LINES
Tylok International, Inc., presently offers three fitting lines CBC-Lok (double ferrule) &CS-Lok (single ferrule) industry standard designs and the Tylok Standard 4 Seal TubeFitting, a unique and proprietary line based upon Mr. Crawford's improved design.
CBC-Lok® double ferrule tube fittings are completely interchangeable withtube fittings of Swagelok® and Parker A-Lok®.
CS-Lok® single ferrule tube fittings are completely interchangeable withtube fittings of Parker CPI®.
THE FUTUREThe Tylok Design & Development Team is continuously working on newproducts and designs. As a result, our product lines constantly grow to helpservice our Customers.
CUSTOMER CAREAt Tylok, we strive for total satisfaction of our Customers. Your inquirieswill be responded to within 24 hours. Our team features aknowledgeable staff to answer your questions quickly. We have theability to make special items for you at a reasonable price, with fastdelivery. Fast delivery is key to your success. Realizing this, delivery isconstantly being measured via our ISO 9001:2000 QualityManagement System. Our goal is to ship all products from stock tokeep you running.
At Tylok, your Total Satisfaction is our business.
Manitoba/AlbertaCanadian
Registration NumberCertificate No. OA6247.4,OC6248.4 & OA6356.42
REGISTRATIONS& TYPE APPROVALS
ISO 9001:2000Certificate # 012106
Certificate No. 00-C14740-X
FITTINGS
TUB
E VALVESB
ALL TY-FLO® HP SERIES BALL VALVES
Standard seats are Kel-F® and standardseals are Viton. Other materials availableupon request. Operating pressure rangesup to 1,500 PSI with TFE seats, up to 5,000 PSIwith Kel-F® seats. All valves are individually tested.
Orifice Sizes: Series 4 (0.188"), Series 6 (0.250"), Series 8 (0.375")
Typical ends are offered in any combination: Instrumentation tube ends(CBC-Lok,® CS-Lok® or Tylok Standard Tube ends) and Female and Male NPT.
Sizes: Fractional: 1/16" - 1"
Materials: Stainless Steel and Brass.
CBC-LOK® TUBE FITTINGSCBC-Lok® Tube Fittingsare fully interchangeablewith Swagelok® andParker A-Lok®.It features:
� Double collet (ferrule)swaging action
� 2 Positive seal points
� Total component interchangeabilitywith competition
� Ty-Cor™ process applied torear collet (ferrule)
Typical ends include:Instrumentation Tube ends, Female andMale NPT, Butt Weld, Socket Weld,37° flare, BSPP (British Standard Pipe Parallel)and BSPT (British Standard Pipe Taper).
Sizes: Fractional: 1/16" – 1"
Materials: Stainless Steel, Brass and Steel.
� Reliable, simple operationfor on-off service
� Fast acting, one quarter turnfully open to fully closed
� Corrosion resistant
� Maximum performance, straight through flowfor minimum turbulence and pressure drop
� Positive leak tight shut off, even withfluctuating pressures
� Panel mounting capabilities
TY-FLO® 3 PIECE BALL VALVESValves feature:
� 3 Piece, 8-bolt construction provides superior high pressureperformance and ASME B16.34 compliance
� Fire safe to API 607 4th Edition & ISO 10497
� ISO 5211 4-Bolt actuator mounting pad
� API 608 compliant
� NACE MR01-75 Rev 2000 compliant
� Standard 304SS latch lock handles
� Standard ASTM A193 grade B8 stainless bolts
� TFM seats provide superior high temperature performance and chemical resistance
� PEEK seats and seals available
Typical ends include: Instrumentation Tube ends (CBC-Lok & CS Lok), Femaleand Male NPT, Clamp, Butt Weld & Extended Butt Weld, Pipe Socket Weld,IPS Butt Weld Schedule 5, 10 & 40, Raised Face Flange 150# & 300#, etc.
Sizes: Fractional: 1/16" – 1". Other sizes available upon request.
Materials: Stainless Steel and Steel.
Options: Electro Polish, 240 Grit & 320 Grit, Purge Port Ends, Cleaned for Oxygen Service, OvalHandle, Silicon Free.
CS-Lok and CBC-Lok Tube Fittingsare available in all of the configurations
shown above.
CS-LOK® TUBE FITTINGSCS-Lok® Tube Fittingsare fully interchangeablewith Parker CPI®.It features:
� Single ferruleswaging action
� Total component interchangeability
� More tolerant of vibrations
� Heat Code traceable
� ASTM material construction
� Corrosion resistant 316 Stainless Steel Ferrule
Typical ends include: Instrumentation Tube ends, Female and Male NPT, ButtWeld, Socket Weld, 37° flare, BSPP (British Standard Pipe Parallel) and BSPT(British Standard Pipe Taper).
Sizes: Fractional: 1/16" – 1"
Materials: Stainless Steel, Brass and Steel.
THE CREATION OF AN INDUSTRYIn the mid 1940s, Cullen Crawford founded the Crawford Fitting Company.Mr. Crawford developed and patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company. Thus, a new and innovativeindustry was born making it far easier to make tubing connections. This reducesinstallation time and errors. Since his invention, End Users from all four corners of theglobe have made billions of connections. This system provides leak proof seals and thusMr. Crawford has been named “The founder of the flareless fitting.”
SUPERIOR INNOVATIONWell known throughout the fitting industry, Mr. Crawford founded Tylok International, Inc. in the late1950s. Upon request, Mr. Crawford designed a fitting to hold liquid sodium. Having designed andpatented the original flareless fitting, who better to make an improved design? Mr. Crawford knew theproblems better than anyone and, as a result, he developed and patented the Tylok Standard 4 SealTube Fitting, which eliminates problems inherent in his original design.
THE PRESENTMr. Crawford’s legacy lives on through Tylok International. Manufactured in Euclid, Ohio, Tylok’sunique design eliminates common installation problems and provides unparalleled sealing. Allof Tylok’s fitting lines are proudly made in the U.S.A.
FITTING LINES
Tylok International, Inc., presently offers three fitting lines CBC-Lok (double ferrule) &CS-Lok (single ferrule) industry standard designs and the Tylok Standard 4 Seal TubeFitting, a unique and proprietary line based upon Mr. Crawford's improved design.
CBC-Lok® double ferrule tube fittings are completely interchangeable withtube fittings of Swagelok® and Parker A-Lok®.
CS-Lok® single ferrule tube fittings are completely interchangeable withtube fittings of Parker CPI®.
THE FUTUREThe Tylok Design & Development Team is continuously working on newproducts and designs. As a result, our product lines constantly grow to helpservice our Customers.
CUSTOMER CAREAt Tylok, we strive for total satisfaction of our Customers. Your inquirieswill be responded to within 24 hours. Our team features aknowledgeable staff to answer your questions quickly. We have theability to make special items for you at a reasonable price, with fastdelivery. Fast delivery is key to your success. Realizing this, delivery isconstantly being measured via our ISO 9001:2000 QualityManagement System. Our goal is to ship all products from stock tokeep you running.
At Tylok, your Total Satisfaction is our business.
Manitoba/AlbertaCanadian
Registration NumberCertificate No. OA6247.4,OC6248.4 & OA6356.42
REGISTRATIONS& TYPE APPROVALS
ISO 9001:2000Certificate # 012106
Certificate No. 00-C14740-X
Product LineOur HistoryIn the mid 1940s, Cullen Crawford founded theCrawford Fitting Company. Mr. Crawford developedand patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company.Thus, a new and innovative industry was born making itfar easier to make tubing connections. This reducesinstallation time and errors. Since his invention, EndUsers from all four corners of the globe have madebillions of connections. This system provides leakproof seals and thus Mr. Crawford has been named“The founder of the flareless fitting.”
Our MissionIt is our mission, at Tylok International, Inc., tocontinuously strive for and achieve total customersatisfaction with both our products and services.
Our GoalTylok’s aggressive goal is to establishourselves as an industry leader andexpand our market share. This ismaintained in every departmentwithin the organization. Our“total effort” will guard againstlosing the personal touch thatmakes our business enjoyableand prosperous forall involved.
1061 East 260th Street • Euclid, Ohio 44132
Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317
www.tylok.com
FITTINGSPIP
E
&NEEDLE VALVES
MA
NIF
OLD
PIPE FITTINGSTylok Pipe Fittings are offered in popular configurations suchas reducing adapters, reducing bushings, pipe unions, elbows,tees, crosses, etc.
Fittings are manufactured to the same high quality standards as other TylokFittings. Each fitting is thoroughly cleaned to eliminate system contamination andfeatures an attractive surface finish to enhance the appearance of modernscientific instrumentation and equipment.
Fittings are manufactured from materials meeting applicable ASTM or ASMEspecifications, with pipe threads which meet or exceed ANSI B1.20.1 requirements.Strict quality control procedures are followed throughout production.
Pipe thread connections are very common in today’s industry. They arerelatively easy to work with because of the common sizes and dimensionsthroughout manufacturing. It is important to use a thread sealant.These products range from pipe “dopes” to teflon tape, all of whichcan be purchased through your local Tylok Distributor.
Sizes: Fractional: 1/16" – 1"
Materials: Stainless Steel, Brass and Steel.Additional materials available upon request.
MANIFOLDS AND NEEDLE VALVES2, 3 & 5 Valve Manifolds (Forged and Bar Stock), Distribution Manifolds, Double Blockand Bleed Valves, Needle Valves, Condensing Pots (Welding and Integral), Air Distributors.
Manifolds� 2, 3 & 5 Valve designs
� Available in remote or direct mount design
� Bonnets are locked to prevent accidental disengagement from body
� Standard packing Teflon or Graphoil
� Sour gas service available
� Valve tip features self-centering for sure seal every time
� 6,000 PSI standard rating, 10,000 PSI available
Needle Valves� 6,000 PSI standard rating, 10,000 PSI available
� Bar stock valves in either straight or angle pattern available
� CBC-Lok® Compression ends size range 1/8" – 1"
� FNPT, MNPT end size range 1/4" – 1-1/2"
� Valve tip features self-centering for sure seal every time
Materials: Stainless Steel, Brass and Steel.
Line Card Doc. 72309 Rev. G
Product LineOur HistoryIn the mid 1940s, Cullen Crawford founded theCrawford Fitting Company. Mr. Crawford developedand patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company.Thus, a new and innovative industry was born making itfar easier to make tubing connections. This reducesinstallation time and errors. Since his invention, EndUsers from all four corners of the globe have madebillions of connections. This system provides leakproof seals and thus Mr. Crawford has been named“The founder of the flareless fitting.”
Our MissionIt is our mission, at Tylok International, Inc., tocontinuously strive for and achieve total customersatisfaction with both our products and services.
Our GoalTylok’s aggressive goal is to establishourselves as an industry leader andexpand our market share. This ismaintained in every departmentwithin the organization. Our“total effort” will guard againstlosing the personal touch thatmakes our business enjoyableand prosperous forall involved.
1061 East 260th Street • Euclid, Ohio 44132
Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317
www.tylok.com
FITTINGS
PIP
E
&NEEDLE VALVES
MA
NIF
OLD
PIPE FITTINGSTylok Pipe Fittings are offered in popular configurations suchas reducing adapters, reducing bushings, pipe unions, elbows,tees, crosses, etc.
Fittings are manufactured to the same high quality standards as other TylokFittings. Each fitting is thoroughly cleaned to eliminate system contamination andfeatures an attractive surface finish to enhance the appearance of modernscientific instrumentation and equipment.
Fittings are manufactured from materials meeting applicable ASTM or ASMEspecifications, with pipe threads which meet or exceed ANSI B1.20.1 requirements.Strict quality control procedures are followed throughout production.
Pipe thread connections are very common in today’s industry. They arerelatively easy to work with because of the common sizes and dimensionsthroughout manufacturing. It is important to use a thread sealant.These products range from pipe “dopes” to teflon tape, all of whichcan be purchased through your local Tylok Distributor.
Sizes: Fractional: 1/16" – 1"
Materials: Stainless Steel, Brass and Steel.Additional materials available upon request.
MANIFOLDS AND NEEDLE VALVES2, 3 & 5 Valve Manifolds (Forged and Bar Stock), Distribution Manifolds, Double Blockand Bleed Valves, Needle Valves, Condensing Pots (Welding and Integral), Air Distributors.
Manifolds� 2, 3 & 5 Valve designs
� Available in remote or direct mount design
� Bonnets are locked to prevent accidental disengagement from body
� Standard packing Teflon or Graphoil
� Sour gas service available
� Valve tip features self-centering for sure seal every time
� 6,000 PSI standard rating, 10,000 PSI available
Needle Valves� 6,000 PSI standard rating, 10,000 PSI available
� Bar stock valves in either straight or angle pattern available
� CBC-Lok® Compression ends size range 1/8" – 1"
� FNPT, MNPT end size range 1/4" – 1-1/2"
� Valve tip features self-centering for sure seal every time
Materials: Stainless Steel, Brass and Steel.
Line Card Doc. 72309 Rev. G
CBC-LOK
CS-LOK
TYLOK STANDARD
THE CREATION OF AN INDUSTRYIn the mid 1940s, Cullen Crawford founded the Crawford Fitting Company. Mr. Crawford developed and patented the original flareless fitting (nut and two ferrule system), for the Crawford Fitting Company. Thus, a new and innovative industrywas born making it far easier to make tubing connections. This reduces installation timeand errors. Since his invention, End Users from all four corners of the globe have made billions of connections. This system provides leak proof seals and thus Mr. Crawford has been named “The founder of the flareless fitting.”
SUPERIOR INNOVATIONWell known throughout the fitting industry, Mr. Crawford founded Tylok International, Inc. in the late1950s. Upon request, Mr. Crawford designed a fitting to hold liquid sodium. Having designed andpatented the original flareless fitting, who better to make an improved design? Mr. Crawford knew the problems better than anyone and, as a result, he developed and patented the Tylok Standard 4 Seal Tube Fitting, which eliminates problems inherent in his original design.
THE PRESENTMr. Crawford’s legacy lives on through Tylok International. Manufactured in Euclid, Ohio, Tylok’s unique
design eliminates common installation problems and provides unparalleled sealing. All of Tylok’s fittinglines are proudly made in the U.S.A.
FITTING LINES
Tylok International, Inc., presently offers three fitting lines CBC-Lok (double ferrule) & CS-Lok (single ferrule) industry standard designs and the Tylok Standard 4 Seal Tube Fitting, a
unique and proprietary line based upon Mr. Crawford's improved design.
CBC-Lok® double ferrule tube fittings are completely interchangeable with tube fittings of Swagelok® and Parker A-Lok®.
CS-Lok® single ferrule tube fittings are completely interchangeable with tube fittings of Parker CPI®.
THE FUTUREThe Tylok Design & Development Team is continuously working on new products anddesigns. As a result, our product lines constantly grow to help service our Customers.
CUSTOMER CAREAt Tylok, we strive for total satisfaction of our Customers. Your inquiries will be responded to within 24 hours. Our team features a knowledgeable staff toanswer your questions quickly. We have the ability to make special items foryou at a reasonable price, with fast delivery. Fast delivery is key to your success. Realizing this, delivery is constantly being measured via our ISO9001:2000 Quality Management System. Our goal is to ship all productsfrom stock to keep you running.
At Tylok, your Total Satisfaction is our business.Manitoba/Alberta
CanadianRegistration NumberCertificate No. OA6247.4, OC6248.4 & OA6356.42
REGISTRATIONS & TYPE APPROVALS
ISO 9001:2000Certificate # 012106
Certificate No. 00-C14740-X
1061 East 260th Street • Euclid, Ohio 44132Tel: (216) 261-7310 • 1-800-321-0466 Fax: (216) 261-7317 • [email protected]
www.tylok.com Fitting Designs Card Doc. 72313 Rev. C
617880_Fitting_Card:Layout 1 5/19/08 10:36 AM Page 1
CS-LOK® Tube Fittings
34
1
Our GoalTylok’s aggressive goal is to establish ourselves as an industry leader and expand our marketshare. This is maintained in every department within the organization. Our “total effort” willguard against losing the personal touch that makes our business enjoyable and prosperousfor all involved.
2
Our MissionIt is our mission, at Tylok International, Inc., to continuously strive for and achieve totalcustomer satisfaction with both our products and services.
This objective falls within the framework of the larger movement toward “Total Quality” which is derived of four elements:
Make our distributors andsuppliers our partners inproviding the highest qualityproducts and services
Continuous financialsuccess of the company
Total satisfactionof our customers
We accomplish this by maintaining an honest and ethical business relationship with our customers, suppliers and employees.
Create a positiveenvironment for ouremployees that fosterstheir full potential
The Tylok Philosophy
TYLOKTylokTylok
1For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Creation of an IndustryIn the mid 1940s, Cullen Crawford founded theCrawford Fitting Company. Mr. Crawford developedand patented the original flareless fitting (nut and twoferrule system), for the Crawford Fitting Company.Thus, a new and innovative industry was born makingit far easier to make tubing connections. Thisreduces installation time and errors. Since his inven-tion, End Users from all four corners of the globehave made billions of connections. This systemprovides leak proof seals and thus Mr. Crawford hasbeen named “The founder of the flareless fitting.”
Tylok International, Inc. offers a tube fitting line,CS-Lok®, that is fully interchangeable with ParkerCPI™. Although it is always recommended to use allCS-Lok® components, intermixing CS-Lok® bodiesand/or component parts with that of other manufacturerswill not adversely affect sealing ability. CS-Lok®
Tube Fittings are made to strict quality control standardsand cannot guarantee that of other manufacturers.CS-Lok® Tube Fittings are proudly made in the U.S.A.
CS-Lok® Tube Fittings are comprised of three compo-nents: The Body, Single Ferrule (Collet) and Nut.A leak proof seal is obtained through proper ferruleaction as the ferrule is tightened onto the tubing viaaxial thrust provided by the nut. The ferrule providesthe leak proof seal, when the nut and ferrule areproperly drawn up the specified number of turns. Thestainless steel nuts have a molybdenum disulfidecoating, reducing torque and ensuring proper sealing.
Ty-Cor™ refers to the treatment which diffuses car-bon into the surface of the stainless steel, therebyincreasing the surface hardness without affecting thequality of the metal treated. In fact, when AISI 316stainless steel is treated, the corrosion resistance isequal to or better than non-treated 316 stainlesssteel. The increase in corrosion resistance to pittingand stress corrosion is very pronounced in mediawhich contain chlorides (e.g. sea water, bleach, HCl,etc.). The Ty-Cor™ process applied to the ferrule alsohelps eliminate galling and ensures proper sealing ontube end make ups.
• Single ferrule swaging action
• Total component interchangeability
• More tolerant of vibrations
• Heat Code traceable
• ASTM material construction
• Corrosion resistant 316 Stainless Steel ferrule
Tylok International, Inc. ensures all of its Distributorsare trained on the proper installation of compressionfittings, tubing selection & preparation. TylokDistributors are trained to provide the technical supportyou deserve. Additionally, our Distributors will help infinding solutions for specific applications. Contact yourlocal Tylok Distributor for further information.
QMI has registered Tylok International’s QualityManagement System to ISO 9001:2000.The quality system complies with the internationalstandard ISO 9001:2000 and its technical equivalent,ANSI/ISO/ASQ Q9001:2000. Tylok strives tocontinuously improve the effectiveness of theQuality Management System by each memberwithin the organization.
Technical Support & Training
Quality Management System
Ty-Cor™ Process
Introduction Features
Operation
ISO 9001:2000Certificate No.012106
TYLOKTable of Contents/Product LocatorTable of Contents/Product Locator
2 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
SATPF SATPM SBHA SBHFP SBHMPHow To Adapter Tube Adapter Tube Bulkhead Bulkhead BulkheadOrder to Female to Male Adapter Female Pipe Male Pipe
Pipe Pipe Connector Connector
4 5 6 7 8 9
SBHU SBUANF SCAP SF PLUG SFC SMCBulkhead Bulkhead Cap Fitting Plug Female MaleUnion to AN Flare Connector Connector
Union
10 10 11 11 12 13 & 14
SMC-ORS SMC-ORT SPCU SRATT SRPC SRUO-Ring O-Ring Port Reducer Reducing Reducing
Straight Thread Pipe Thread Connector Adapter Tube Port UnionMale Conn. Male Conn. Union to Tube Connector
15 16 17 18 19 20
STBW STSW SU SUANF SELU SFETube to Butt Tube to Socket Union Tube to Union Elbow Female Elbow
Weld Weld AN FlareConnector Connector Union
21 22 23 24 25 26
HOWTO
ORDER
TYLOKTable of Contents/Product LocatorTable of Contents/Product Locator
3For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
SME STBWE STSWE STFT STMT STTFMale Elbow Tube to Butt Tube to Female Run Male Run Female
Weld Elbow Socket Weld Tee Tee Branch TeeElbow
27 & 28 29 30 31 32 33
STTM STTT SCR SBI SPI SNMale Union Tee Union Cross Barbed Plane Nut
Branch Tee Insert Insert
34 35 36 37 38 39
SKN SC TubingKnurled Nut Single Collet Replacement Special Installation Selection &
(Ferrule) Parts Products Instructions Preparation
39 40 40 41 42 43
Gas Service/ Technical Heat Tube Insertion WarrantySafety/ Data Traceability/ Chart/ InformationQuality Mat’l Spec./ Applications
Pre-Set Tool
44 45 46 47 48
SPECIAL
PRODUCTS
COMPONENT
REPLACEMENT
PARTS
CS-LOK
®INSTALLATION
INSTRUCTIONS
CS-LOK
® TUBING
SELECTION&
PREPARATION
GASSERVICE/
SAFETY/
QUALITY
TECHNICAL
DATA
TRACEABILITY/
MATERIALSPEC./
PRE-SETTOOL
TUBEINSERTION
CHART/
APPLICATIONS
WARRANTY
INFORMATION
HOW TO ORDERHow to Order CS-LOK® Tube FittingsHow to Order CS-LOK® Tube Fittings
4 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
CS-Lok® Tube Fittings are ordered as listed in this catalog by inserting the material code before the part number.CS-Lok® Tube Fittings can be identified through the part number as to material, tube size, configuration and threadconnection. The part number describes a complete fitting assembly. The size nomenclature to describe a tee fittingis from left (1) to right (2) and down (3). Special Configurations available upon request.
Example: A Stainless Steel Female Run Tee, 3/8” Tube Size to 1/4” Female Pipe to 3/8” Tube is designated as follows.
Chart 2 - Tube O.D.Chart 1 -Material
Chart 3 - Style
Chart 4 - Description
SS Stainless SteelB BrassS Steel
S CS-Lok®
Tube or Pipe AN TubeHose OD Thread Flare Size Pipe Thread
Designator (inches) (NPT) (inches) BSPP/BSPT1 1/16 1/16-27 1/16-282 1/8 1/8-27 1/8 1/8-283 3/16 3/164 1/4 1/4-18 1/4 1/4-195 5/16 5/166 3/8 3/8-18 3/8 3/8-198 1/2 1/2-14 1/2 1/2-14
10 5/8 5/812 3/4 3/4-14 3/4 3/4-1414 7/8 7/816 1 1.0-11 1/2 1 1.0-11
SU UnionSUANF Tube to AN Flare UnionSELU Union ElbowSFE Female ElbowSME Male ElbowSTBWE Tube to Butt Weld ElbowSTSWE Tube to Socket Weld ElbowSTFT Female Run TeeSTMT Male Run TeeSTTF Female Branch TeeSTTM Male Branch TeeSTTT Union TeeSCR Union CrossSBI Barbed InsertSPI Plane InsertSN NutSKN Knurled NutSC Single Collet (Ferrule)
SATPF Adapter Tube to Female PipeSATPM Adapter Tube to Male PipeSBHA Bulkhead AdapterSBHFP Bulkhead Female Pipe ConnectorSBHMP Bulkhead Male Pipe ConnectorSBHU Bulkhead UnionSBUANF Bulkhead to AN Flare UnionSCAP CapSF PLUG Fitting PlugSFC Female ConnectorSMC Male ConnectorSMC-ORS O Ring Straight Thread Male ConnectorSMC-ORT O Ring Pipe Thread Male ConnectorSPCU Port Connector UnionSRATT Reducer Adapter Tube to TubeSRPC Reducing Port ConnectorSRU Reducing UnionSTBW Tube to Butt Weld ConnectorSTSW Tube to Socket Weld Connector
SS - 6 - S TFT - 4 1 2
Material Tube O.D. Style Description Odd End Size
Chart 1 Chart 2 Chart 3 Chart 4 Chart 23
*NOTE: All dimensions subject to change, to be used for reference only.
SATPFSATPFSATPF
PART INTERCHANGES T P A E L BHNUMBER WITH TUBE PIPE END THRU HOLE BODY HEX
O.D. NPT2-SATPF-2 2-2 T2HG 1/8 1/8 1.234 .078 .562 9/16
2-SATPF-4 2-4 T2HG 1/8 1/4 1.406 .078 .562 3/4
3-SATPF-2 3-2 T2HG 3/16 1/8 1.281 .125 .609 9/16
3-SATPF-4 3-4 T2HG 3/16 1/4 1.453 .125 .609 3/4
4-SATPF-2 4-2 T2HG 1/4 1/8 1.312 .156 .640 9/16
4-SATPF-4 4-4 T2HG 1/4 1/4 1.484 .156 .640 3/4
4-SATPF-6 4-6 T2HG 1/4 3/8 1.500 .156 .640 7/8
4-SATPF-8 4-8 T2HG 1/4 1/2 1.812 .156 .640 1-1/16
5-SATPF-2 5-2 T2HG 5/16 1/8 1.390 .219 .687 9/16
5-SATPF-4 5-4 T2HG 5/16 1/4 1.516 .219 .687 3/4
6-SATPF-2 6-2 T2HG 3/8 1/8 1.359 .281 .718 9/16
6-SATPF-4 6-4 T2HG 3/8 1/4 1.547 .281 .718 3/4
6-SATPF-6 6-6 T2HG 3/8 3/8 1.594 .281 .718 7/8
6-SATPF-8 6-8 T2HG 3/8 1/2 1.843 .281 .718 1-1/16
8-SATPF-4 8-4 T2HG 1/2 1/4 1.828 .375 .984 3/4
8-SATPF-6 8-6 T2HG 1/2 3/8 1.890 .375 .984 7/8
8-SATPF-8 8-8 T2HG 1/2 1/2 2.140 .375 .984 1-1/16
10-SATPF-6 10-6 T2HG 5/8 3/8 1.937 .468 1.031 7/8
10-SATPF-8 10-8 T2HG 5/8 1/2 2.187 .468 1.031 1-1/16
12-SATPF-8 12-8 T2HG 3/4 1/2 2.187 .578 1.031 1-1/16
14-SATPF-12 14-12 T2HG 7/8 3/4 2.265 .687 1.078 1-1/4
16-SATPF-12 16-12 T2HG 1 3/4 2.484 .812 1.296 1-1/4
16-SATPF-16 16-16 T2HG 1 1 2.828 .812 1.296 1-5/8
Adapter Tube toFemale Pipe
5For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
SATPMSATPMSATPM
PART INTERCHANGES T P A D E1
L W BHNUMBER WITH TUBE PIPE END THRU BODY
O.D. NPT HOLE HEX2-SATPM-2 2-2 T2HF 1/8 1/8 1.187 .375 .078 .562 .023 7/16
2-SATPM-4 2-4 T2HF 1/8 1/4 1.406 .562 .078 .562 .023 9/16
3-SATPM-2 3-2 T2HF 3/16 1/8 1.234 .375 .125 .609 .031 7/16
3-SATPM-4 3-4 T2HF 3/16 1/4 1.453 .562 .125 .609 .031 9/16
4-SATPM-2 4-2 T2HF 1/4 1/8 1.265 .375 .156 .640 .047 7/16
4-SATPM-4 4-4 T2HF 1/4 1/4 1.484 .562 .156 .640 .047 9/16
4-SATPM-6 4-6 T2HF 1/4 3/8 1.500 .562 .156 .640 .047 11/16
4-SATPM-8 4-8 T2HF 1/4 1/2 1.718 .750 .156 .640 .047 7/8
5-SATPM-2 5-2 T2HF 5/16 1/8 1.297 .375 .219 .687 .047 7/16
5-SATPM-4 5-4 T2HF 5/16 1/4 1.516 .562 .219 .687 .047 9/16
6-SATPM-2 6-2 T2HF 3/8 1/8 1.343 .375 .187 .718 .047 7/16
6-SATPM-4 6-4 T2HF 3/8 1/4 1.562 .562 .281 .718 .047 9/16
6-SATPM-6 6-6 T2HF 3/8 3/8 1.609 .562 .281 .718 .047 11/16
6-SATPM-8 6-8 T2HF 3/8 1/2 1.812 .750 .281 .718 .047 7/88-SATPM-4 8-4 T2HF 1/2 1/4 1.828 .562 .281 .984 .062 9/168-SATPM-6 8-6 T2HF 1/2 3/8 1.859 .562 .375 .984 .062 11/168-SATPM-8 8-8 T2HF 1/2 1/2 2.078 .750 .375 .984 .062 7/810-SATPM-6 10-6 T2HF 5/8 3/8 1.906 .562 .375 1.031 .078 11/1610-SATPM-8 10-8 T2HF 5/8 1/2 2.125 .750 .468 1.031 .078 7/810-SATPM-12 10-12 T2HF 5/8 3/4 2.125 .750 .468 1.031 .078 1-1/1612-SATPM-8 12-8 T2HF 3/4 1/2 2.125 .750 .468 1.031 .086 7/812-SATPM-12 12-12 T2HF 3/4 3/4 2.125 .750 .578 1.031 .086 1-1/1612-SATPM-16 12-16 T2HF 3/4 1 2.406 .937 .578 1.031 .086 1-3/814-SATPM-12 14-12 T2HF 7/8 3/4 2.172 .750 .687 1.078 .094 1-3/816-SATPM-12 16-12 T2HF 1 3/4 2.390 .750 .625 1.296 .094 1-1/1616-SATPM-16 16-16 T2HF 1 1 2.687 .937 .812 1.296 .094 1-3/8
Adapter Tube toMale Pipe
*NOTE: All dimensions subject to change, to be used for reference only.
6 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
*NOTE: All dimensions subject to change, to be used for reference only.
SBHASBHASBHA
PART INTERCHANGES T1 T2 A B C D E F L NH JNH BH PANELNUMBER WITH TUBE TUBE THRU NUT JAM NUT BODY HOLE
O.D. O.D. HOLE HEX HEX HEX2-SBHA-2 2-2 T2H2BZ 1/8 1/8 2.000 .500 1.234 .562 .078 .969 1.234 7/16 1/2 1/2 21/64
4-SBHA-4 4-4 T2H2BZ 1/4 1/4 2.203 .609 1.328 .640 .156 1.031 1.906 9/16 5/8 5/8 29/64
6-SBHA-6 6-6 T2H2BZ 3/8 3/8 2.437 .656 1.453 .718 .281 1.156 2.156 11/16 3/4 3/4 37/64
8-SBHA-8 8-8 T2H2BZ 1/2 1/2 2.953 .906 1.656 .984 .375 1.250 2.547 7/8 15/16 15/16 49/64
Bulkhead Adapter
7For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
SBHFPSBHFPSBHFP
PART INTERCHANGES T P A B C D E L NH JNH BH PANELNUMBER WITH TUBE PIPE END THRU NUT JAM NUT BODY HOLE
O.D. NPT HOLE HEX HEX HEX2-SBHFP-2 2-2 GH2BZ 1/8 1/8 1.766 .500 1.234 .969 .094 1.500 7/16 1/2 9/16 21/64
3-SBHFP-2 3-2 GH2BZ 3/16 1/8 1.797 .547 1.266 1.000 .125 1.531 1/2 9/16 9/16 25/64
4-SBHFP-2 4-2 GH2BZ 1/4 1/8 1.859 .609 1.328 1.031 .187 1.562 9/16 5/8 5/8 29/64
4-SBHFP-4 4-4 GH2BZ 1/4 1/4 2.047 .609 1.328 1.031 .187 1.750 9/16 5/8 3/4 29/64
5-SBHFP-2 5-2 GH2BZ 5/16 1/8 1.969 .641 1.422 1.125 .250 1.656 5/8 3/4 11/16 33/64
6-SBHFP-4 6-4 GH2BZ 3/8 1/4 2.172 .656 1.453 1.156 .281 1.875 11/16 3/4 3/4 37/64
8-SBHFP-6 8-6 GH2BZ 1/2 3/8 2.437 .906 1.656 1.250 .406 2.031 7/8 15/16 15/16 49/64
8-SBHFP-8 8-8 GH2BZ 1/2 1/2 2.625 .906 1.656 1.250 .406 2.219 7/8 15/16 1-1/16 49/64
10-SBHFP-8 10-8 GH2BZ 5/8 1/2 2.656 .969 1.687 1.281 .500 2.250 1 1-1/16 1-1/16 57/64
16-SBHFP-16 16-16 GH2BZ 1 1 3.687 1.234 2.266 1.781 .875 3.187 1-1/2 1-1/2 1-5/8 1-21/64
Bulkhead FemalePipe Connector
*NOTE: All dimensions subject to change, to be used for reference only.
8 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
SBHMPSBHMPSBHMP
PART INTERCHANGES T P A B C D E1
F L NH JNH BH PANELNUMBER WITH TUBE PIPE END THRU NUT JAM NUT BODY HOLE
O.D. NPT HOLE HEX HEX HEX1-SBHMP-1 1-1 FH2BZ 1/16 1/16 1.187 .437 .687 .375 .052 .531 1.031 5/16 7/16 5/16 13/64
1-SBHMP-2 1-2 FH2BZ 1/16 1/8 1.234 .437 .687 .375 .052 .531 1.094 5/16 7/16 7/16 13/64
2-SBHMP-2 2-2 FH2BZ 1/8 1/8 1.828 .500 1.234 .375 .094 .969 1.578 7/16 1/2 1/2 21/64
3-SBHMP-2 3-2 FH2BZ 3/16 1/8 1.859 .547 1.266 .375 .125 1.000 1.594 1/2 9/16 9/16 25/64
4-SBHMP-2 4-2 FH2BZ 1/4 1/8 1.953 .609 1.328 .375 .187 1.031 1.656 9/16 5/8 5/8 29/64
4-SBHMP-4 4-4 FH2BZ 1/4 1/4 2.109 .609 1.328 .562 .187 1.031 1.843 9/16 5/8 5/8 29/64
4-SBHMP-6 4-6 FH2BZ 1/4 3/8 2.187 .609 1.328 .562 .187 1.016 1.891 9/16 5/8 11/16 29/64
4-SBHMP-8 4-8 FH2BZ 1/4 1/2 2.484 .609 1.328 .562 .187 1.016 2.187 9/16 5/8 7/8 29/64
6-SBHMP-4 6-4 FH2BZ 3/8 1/4 2.266 .656 1.453 .562 .281 1.156 1.969 11/16 3/4 3/4 37/64
6-SBHMP-6 6-6 FH2BZ 3/8 3/8 2.312 .656 1.437 .562 .281 1.156 1.969 11/16 3/4 3/4 37/64
6-SBHMP-8 6-8 FH2BZ 3/8 1/2 2.609 .656 1.437 .750 .281 1.156 2.312 11/16 3/4 7/8 37/64
8-SBHMP-4 8-4 FH2BZ 1/2 1/4 2.547 .906 1.656 .562 .281 1.250 2.141 7/8 15/16 15/16 49/64
8-SBHMP-6 8-6 FH2BZ 1/2 3/8 2.484 .906 1.656 .562 .375 1.250 2.094 7/8 15/16 15/16 49/64
8-SBHMP-8 8-8 FH2BZ 1/2 1/2 2.719 .906 1.656 .750 .406 1.250 2.312 7/8 15/16 15/16 49/64
Bulkhead MalePipe Connector
9For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
*NOTE: All dimensions subject to change, to be used for reference only.
SBHU/SBUANFSBHU/SBUANFSBHU/SBUANF
PART INTERCHANGES T A B C1 C2 D E L NH JNH BH PANELNUMBER WITH TUBE THRU NUT JAM NUT BODY HOLE
O.D. HOLE HEX HEX HEX1-SBHU-1 1-1 WBZ 1/16 1.234 .344 .687 .437 .531 .052 .937 5/16 5/16 5/16 13/64
2-SBHU-2 2-2 WBZ 1/8 2.016 .500 1.234 .609 .969 .094 1.500 7/16 1/2 1/2 21/64
3-SBHU-3 3-3 WBZ 3/16 2.109 .547 1.266 .625 1.000 .125 1.594 1/2 9/16 9/16 25/64
4-SBHU-4 4-4 WBZ 1/4 2.266 .609 1.328 .703 1.031 .187 1.687 9/16 5/8 5/8 29/64
5-SBHU-5 5-5 WBZ 5/16 2.391 .641 1.406 .734 1.125 .250 1.812 5/8 11/16 11/16 33/64
6-SBHU-6 6-6 WBZ 3/8 2.453 .656 1.453 .766 1.156 .281 1.875 11/16 3/4 3/4 37/64
8-SBHU-8 8-8 WBZ 1/2 2.797 .906 1.656 .859 1.250 .406 2.000 7/8 15/16 15/16 49/64
10-SBHU-10 10-10 WBZ 5/8 2.859 .969 1.687 .859 1.281 .500 2.062 1 1-1/16 1-1/16 57/64
12-SBHU-12 12-12 WBZ 3/4 3.109 .969 1.875 .859 1.469 .625 2.312 1-1/8 1-3/16 1-3/16 1-1/64
14-SBHU-14 14-14 WBZ 7/8 3.328 1.031 2.094 .875 1.687 .718 2.531 1-1/4 1-3/8 1-3/8 1-9/64
16-SBHU-16 16-16 WBZ 1 3.766 1.234 2.266 1.047 1.781 .875 2.812 1-1/2 1-5/8 1-5/8 1-21/64
PART INTERCHANGES T J A B C D E1
F L NH BH JNH PANELNUMBER WITH TUBE THREAD THRU NUT BODY JAM NUT HOLE
O.D. HOLE HEX HEX HEX2-SBUANF-2 2-2 XH2BZ 1/8 5/16-24 1.906 .500 1.234 .453 .062 .969 1.656 7/16 1/2 1/2 21/64
3-SBUANF-3 3-3 XH2BZ 3/16 3/8-24 1.984 .547 1.266 .484 .125 1.000 1.719 1/2 9/16 9/16 25/64
4-SBUANF-4 4-4 XH2BZ 1/4 7/16-20 2.125 .609 1.328 .547 .172 1.031 1.828 9/16 5/8 5/8 29/64
5-SBUANF-5 5-5 XH2BZ 5/16 1/2-20 2.219 .641 1.406 .547 .234 1.125 1.922 5/8 11/16 11/16 33/64
6-SBUANF-6 6-6 XH2BZ 3/8 9/16-18 2.250 .656 1.453 .562 .281 1.156 1.969 11/16 11/16 3/4 37/64
8-SBUANF-8 8-8 XH2BZ 1/2 3/4-16 2.594 .906 1.656 .656 .391 1.250 2.187 7/8 15/16 15/16 49/64
10-SBUANF-10 10-10 XH2BZ 5/8 7/8-14 2.734 .969 1.687 .766 .484 1.281 2.234 1 1-1/16 1-1/16 57/64
12-SBUANF-12 12-12 XH2BZ 3/4 1-1/16-12 3.109 .969 1.875 .859 .609 1.469 2.719 1-1/8 1-3/16 1-3/16 1-1/64
16-SBUANF-16 16-16 XH2BZ 1 1-5/16-12 3.641 1.234 2.266 .906 .844 1.781 3.156 1-1/2 1-5/8 1-5/8 1-21/64
Bulkhead Union
Bulkhead to ANFlare Union
*NOTE: All dimensions subject to change, to be used for reference only.
10 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
SCAP/SF PLUGSCAP/SF PlugSCAP/SF Plug
Cap
11For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
PART INTERCHANGES T A B C L BH NHNUMBER WITH TUBE O.D. BODY HEX NUT HEX1-SCAP 1 PNBZ 1/16 .594 .344 .437 .437 5/16 5/16
2-SCAP 2 PNBZ 1/8 .797 .500 .609 .531 7/16 7/16
3-SCAP 3 PNBZ 3/16 .844 .547 .625 .578 7/16 1/2
4-SCAP 4 PNBZ 1/4 .922 .609 .703 .625 1/2 9/16
5-SCAP 5 PNBZ 5/16 .969 .641 .734 .672 9/16 5/8
6-SCAP 6 PNBZ 3/8 1.016 .656 .766 .719 5/8 11/16
8-SCAP 8 PNBZ 1/2 1.156 .906 .859 .750 13/16 7/8
10-SCAP 10 PNBZ 5/8 1.188 .969 .859 .781 15/16 1
12-SCAP 12 PNBZ 3/4 1.234 .969 .859 .844 1-1/16 1-1/8
14-SCAP 14 PNBZ 7/8 1.344 1.016 .859 .937 1-3/16 1-1/4
16-SCAP 16 PNBZ 1 1.516 1.234 1.047 1.031 1-3/8 1-1/2
*NOTE: All dimensions subject to change, to be used for reference only.
Fitting Plug
PART INTERCHANGES T NHNUMBER WITH TUBE O.D. NUT HEX1-SF PLUG 1 FNZ 1/16 5/16
2-SF PLUG 2 FNZ 1/8 7/16
3-SF PLUG 3 FNZ 3/16 1/2
4-SF PLUG 4 FNZ 1/4 9/16
5-SF PLUG 5 FNZ 5/16 5/8
6-SF PLUG 6 FNZ 3/8 11/16
8-SF PLUG 8 FNZ 1/2 7/8
10-SF PLUG 10 FNZ 5/8 1
12-SF PLUG 12 FNZ 3/4 1-1/8
14-SF PLUG 14 FNZ 7/8 1-1/4
16-SF PLUG 16 FNZ 1 1-1/2
*NOTE: All dimensions subject to change, to be used for reference only.
SFCSFCSFC
Female Connector
*NOTE: All dimensions subject to change, to be used for reference only.
12 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
PART INTERCHANGES T P A B C E L NH BHNUMBER WITH TUBE PIPE END THRU NUT BODY
O.D. NPT HOLE HEX HEX1-SFC-1 1-1 GBZ 1/16 1/16 .937 .344 .437 .052 .782 5/16 7/161-SFC-2 1-2 GBZ 1/16 1/8 .969 .344 .437 .052 .812 5/16 9/162-SFC-2 2-2 GBZ 1/8 1/8 1.125 .500 .609 .094 .875 7/16 9/162-SFC-4 2-4 GBZ 1/8 1/4 1.328 .500 .609 .094 1.062 7/16 3/42-SFC-6 2-6 GBZ 1/8 3/8 1.390 .500 .609 .094 1.125 7/16 7/83-SFC-2 3-2 GBZ 3/16 1/8 1.171 .547 .625 .125 .906 1/2 9/163-SFC-4 3-4 GBZ 3/16 1/4 1.344 .547 .625 .125 1.094 1/2 3/43-SFC-8 3-8 GBZ 3/16 1/2 1.594 .547 .625 .125 1.344 1/2 1-1/164-SFC-1 4-1 GBZ 1/4 1/16 1.203 .609 .703 .187 .906 9/16 1/24-SFC-2 4-2 GBZ 1/4 1/8 1.234 .609 .703 .187 .937 9/16 9/164-SFC-4 4-4 GBZ 1/4 1/4 1.406 .609 .703 .187 1.125 9/16 3/44-SFC-6 4-6 GBZ 1/4 3/8 1.484 .609 .703 .187 1.187 9/16 7/84-SFC-8 4-8 GBZ 1/4 1/2 1.670 .609 .703 .187 1.375 9/16 1-1/165-SFC-2 5-2 GBZ 5/16 1/8 1.266 .640 .734 .250 .969 5/8 9/165-SFC-4 5-4 GBZ 5/16 1/4 1.453 .640 .734 .250 1.156 5/8 3/45-SFC-6 5-6 GBZ 5/16 3/8 1.515 .640 .734 .250 1.218 5/8 7/85-SFC-8 5-8 GBZ 5/16 1/2 1.703 .640 .734 .250 1.406 5/8 1-1/166-SFC-2 6-2 GBZ 3/8 1/8 1.297 .656 .766 .281 1.000 11/16 5/86-SFC-4 6-4 GBZ 3/8 1/4 1.484 .656 .766 .281 1.187 11/16 3/46-SFC-6 6-6 GBZ 3/8 3/8 1.547 .656 .766 .281 1.250 11/16 7/86-SFC-8 6-8 GBZ 3/8 1/2 1.734 .656 .766 .281 1.437 11/16 1-1/166-SFC-12 6-12 GBZ 3/8 3/4 1.875 .656 .766 .281 1.593 11/16 1-1/48-SFC-4 8-4 GBZ 1/2 1/4 1.593 .906 .859 .406 1.187 7/8 13/168-SFC-6 8-6 GBZ 1/2 3/8 1.656 .906 .859 .406 1.250 7/8 7/88-SFC-8 8-8 GBZ 1/2 1/2 1.843 .906 .859 .406 1.437 7/8 1-1/168-SFC-12 8-12 GBZ 1/2 3/4 1.906 .906 .859 .406 1.500 7/8 1-1/48-SFC-16 8-16 GBZ 1/2 1 2.265 .906 .859 .406 1.875 7/8 1-5/810-SFC-4 10-4 GBZ 5/8 1/4 1.797 .969 .859 .281 1.406 1 15/1610-SFC-6 10-6 GBZ 5/8 3/8 1.656 .969 .859 .500 1.250 1 15/1610-SFC-8 10-8 GBZ 5/8 1/2 1.844 .969 .859 .500 1.437 1 1-1/1610-SFC-12 10-12 GBZ 5/8 3/4 1.953 .969 .859 .500 1.500 1 1-1/412-SFC-6 12-6 GBZ 3/4 3/8 1.655 .969 .859 .500 1.265 1-1/8 1-1/1612-SFC-8 12-8 GBZ 3/4 1/2 1.844 .969 .859 .625 1.437 1-1/8 1-1/1612-SFC-12 12-12 GBZ 3/4 3/4 1.906 .969 .859 .625 1.500 1-1/8 1-1/412-SFC-16 12-16 GBZ 3/4 1 2.265 .969 .859 .625 1.875 1-1/8 1-5/814-SFC-8 14-8 GBZ 7/8 1/2 1.828 1.016 .859 .687 1.437 1-1/4 1-3/1614-SFC-12 14-12 GBZ 7/8 3/4 1.969 1.016 .859 .719 1.562 1-1/4 1-3/814-SFC-16 14-16 GBZ 7/8 1 2.234 1.016 .859 .719 1.843 1-1/4 1-5/816-SFC-12 16-12 GBZ 1 3/4 2.109 1.234 1.047 .875 1.625 1-1/2 1-3/816-SFC-16 16-16 GBZ 1 1 2.453 1.234 1.047 .875 1.969 1-1/2 1-5/8
*NOTE: All dimensions subject to change, to be used for reference only.
SMCSMCSMC
PART INTERCHANGES T P A B C D E1
L NH BHNUMBER WITH TUBE PIPE END THRU NUT BODY
O.D. NPT HOLE HEX HEX1-SMC-1 1-1 FBZ 1/16 1/16 .937 .344 .437 .375 .052 .797 5/16 5/16
1-SMC-2 1-2 FBZ 1/16 1/8 1.031 .344 .437 .375 .052 .875 5/16 7/16
2-SMC-1 2-1 FBZ 1/8 1/16 1.172 .500 .609 .375 .094 .906 7/16 7/16
2-SMC-2 2-2 FBZ 1/8 1/8 1.203 .500 .609 .375 .094 .937 7/16 7/16
2-SMC-4 2-4 FBZ 1/8 1/4 1.406 .500 .609 .562 .094 1.140 7/16 9/16
2-SMC-6 2-6 FBZ 1/8 3/8 1.406 .500 .609 .562 .094 1.156 7/16 11/16
2-SMC-8 2-8 FBZ 1/8 1/2 1.656 .500 .609 .750 .094 1.406 7/16 7/8
3-SMC-2 3-2 FBZ 3/16 1/8 1.234 .546 .625 .375 .125 .969 1/2 7/16
3-SMC-4 3-4 FBZ 3/16 1/4 1.437 .546 .625 .562 .125 1.171 1/2 9/16
4-SMC-1 4-1 FBZ 1/4 1/16 1.299 .609 .703 .375 .125 1.000 9/16 1/2
4-SMC-2 4-2 FBZ 1/4 1/8 1.299 .609 .703 .375 .187 1.000 9/16 1/2
4-SMC-4 4-4 FBZ 1/4 1/4 1.484 .609 .703 .562 .187 1.203 9/16 9/16
4-SMC-6 4-6 FBZ 1/4 3/8 1.516 .609 .703 .562 .187 1.219 9/16 11/16
4-SMC-8 4-8 FBZ 1/4 1/2 1.766 .609 .703 .750 .187 1.469 9/16 7/8
4-SMC-12 4-12 FBZ 1/4 3/4 1.828 .609 .703 .750 .187 1.531 9/16 1-1/16
4-SMC-16 4-16 FBZ 1/4 1 2.109 .609 .703 .937 .187 1.812 9/16 1-3/8
5-SMC-2 5-2 FBZ 5/16 1/8 1.343 .641 .734 .375 .187 1.047 5/8 9/16
5-SMC-4 5-4 FBZ 5/16 1/4 1.516 .641 .734 .562 .250 1.234 5/8 9/16
5-SMC-6 5-6 FBZ 5/16 3/8 1.547 .641 .734 .562 .250 1.250 5/8 11/16
5-SMC-8 5-8 FBZ 5/16 1/2 1.765 .641 .734 .750 .250 1.468 5/8 7/8
6-SMC-2 6-2 FBZ 3/8 1/8 1.390 .656 .766 .375 .187 1.109 11/16 5/8
6-SMC-4 6-4 FBZ 3/8 1/4 1.578 .656 .766 .562 .281 1.281 11/16 5/8
6-SMC-6 6-6 FBZ 3/8 3/8 1.578 .656 .766 .562 .281 1.281 11/16 11/16
6-SMC-8 6-8 FBZ 3/8 1/2 1.828 .656 .766 .750 .281 1.531 11/16 7/8
6-SMC-12 6-12 FBZ 3/8 3/4 1.875 .656 .766 .750 .281 1.593 11/16 1-1/16
6-SMC-16 6-16 FBZ 3/8 1 2.141 .656 .766 .937 .281 1.843 11/16 1-3/8
Male Connector
13For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
SMCSMCSMC
PART INTERCHANGES T P A B C D E1 L NH BHNUMBER WITH TUBE PIPE END THRU NUT BODY
O.D. NPT HOLE HEX HEX8-SMC-2 8-2 FBZ 1/2 1/8 1.531 .906 .859 .375 .187 1.125 7/8 13/16
8-SMC-4 8-4 FBZ 1/2 1/4 1.719 .906 .859 .562 .281 1.312 7/8 13/16
8-SMC-6 8-6 FBZ 1/2 3/8 1.719 .906 .859 .562 .375 1.312 7/8 13/16
8-SMC-8 8-8 FBZ 1/2 1/2 1.937 .906 .859 .750 .406 1.531 7/8 7/8
8-SMC-12 8-12 FBZ 1/2 3/4 1.984 .906 .859 .750 .406 1.593 7/8 1-1/16
8-SMC-16 8-16 FBZ 1/2 1 2.250 .906 .859 .937 .406 1.859 7/8 1-3/8
10-SMC-4 10-4 FBZ 5/8 1/4 1.934 .969 .859 .562 .281 1.343 1 15/16
10-SMC-6 10-6 FBZ 5/8 3/8 1.934 .969 .859 .562 .375 1.343 1 15/16
10-SMC-8 10-8 FBZ 5/8 1/2 1.937 .969 .859 .750 .469 1.531 1 15/16
10-SMC-12 10-12 FBZ 5/8 3/4 1.984 .969 .859 .750 .500 1.593 1 1-1/16
10-SMC-16 10-16 FBZ 5/8 1 2.172 .969 .859 .937 .500 1.781 1 1-3/8
12-SMC-4 12-4 FBZ 3/4 1/4 1.796 .969 .859 .562 .281 1.405 1-1/4 1-1/16
12-SMC-6 12-6 FBZ 3/4 3/8 1.796 .969 .859 .562 .375 1.405 1-1/4 1-1/16
12-SMC-8 12-8 FBZ 3/4 1/2 1.984 .969 .859 .750 .468 1.593 1-1/8 1-1/16
12-SMC-12 12-12 FBZ 3/4 3/4 1.984 .969 .859 .750 .625 1.593 1-1/8 1-1/16
12-SMC-16 12-16 FBZ 3/4 1 2.250 .969 .859 .937 .625 1.859 1-1/8 1-3/8
14-SMC-8 14-8 FBZ 7/8 1/2 1.984 1.015 .859 .750 .468 1.593 1-3/8 1-3/16
14-SMC-12 14-12 FBZ 7/8 3/4 1.984 1.015 .859 .750 .625 1.593 1-1/4 1-3/16
14-SMC-16 14-16 FBZ 7/8 1 2.250 1.015 .859 .937 .718 1.859 1-1/4 1-3/8
16-SMC-4 16-4 FBZ 1 1/4 2.055 1.234 1.046 .562 .281 1.562 1-1/2 1-3/8
16-SMC-6 16-6 FBZ 1 3/8 2.055 1.234 1.046 .562 .375 1.562 1-1/2 1-3/8
16-SMC-8 16-8 FBZ 1 1/2 2.265 1.234 1.046 .750 .468 1.781 1-1/2 1-3/8
16-SMC-12 16-12 FBZ 1 3/4 2.265 1.234 1.046 .750 .625 1.781 1-1/2 1-3/8
16-SMC-16 16-16 FBZ 1 1 2.453 1.234 1.046 .937 .875 1.969 1-1/2 1-3/8
Male Connector
14 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
*NOTE: All dimensions subject to change, to be used for reference only.
SMC-ORSSMC-ORSSMC-ORS
PART INTERCHANGES T J A B C D E1 L NH BHNUMBER WITH TUBE O.D. THREAD THRU HOLE NUT HEX BODY HEX O-RING1-SMC-ORS 1-1 ZHBA5 1/16 5/16-24 1.047 .344 .437 .343 .052 .906 5/16 9/16 AS-011
2-SMC-ORS 2-2 ZHBA5 1/8 5/16-24 1.297 .500 .609 .343 .094 1.031 7/16 9/16 AS-011
3-SMC-ORS 3-3 ZHBA5 3/16 3/8-24 1.359 .547 .625 .375 .125 1.094 1/2 5/8 AS-012
4-SMC-ORS 4-4 ZHBA5 1/4 7/16-20 1.516 .609 .703 .406 .187 1.219 9/16 3/4 AS-111
5-SMC-ORS 5-5 ZHBA5 5/16 1/2-20 1.609 .641 .734 .437 .250 1.312 5/8 7/8 AS-112
6-SMC-ORS 6-6 ZHBA5 3/8 9/16-18 1.672 .656 .766 .468 .281 1.375 11/16 15/16 AS-113
8-SMC-ORS 8-8 ZHBA5 1/2 3/4-16 1.812 .906 .859 .468 .406 1.406 7/8 1-1/8 AS-116
12-SMC-ORS 12-12 ZHBA5 3/4 1-1/16-12 2.062 .969 .859 .562 .625 1.656 1-1/8 1-1/2 AS-215
16-SMC-ORS 16-16 ZHBA5 1 1-5/16-12 2.297 1.234 1.047 .562 .875 1.812 1-1/2 1-3/4 AS-219
O-Ring Straight ThreadMale Connector
15For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
SMC-ORTSMC-ORTSMC-ORT
PART INTERCHANGES T P A B C D E1
L NH BHNUMBER WITH TUBE PIPE END THRU NUT BODY O-RING
O.D. NPT HOLE HEX HEX2-SMC-2-ORT 2-2 ZHBF5 1/8 1/8 1.297 .500 .609 .280 .094 1.031 7/16 3/4 AS-111
2-SMC-4-ORT 2-4 ZHBF5 1/8 1/4 1.437 .516 .609 .375 .094 1.172 7/16 15/16 AS-113
3-SMC-4-ORT 3-4 ZHBF5 3/16 1/4 1.469 .547 .641 .375 .125 1.203 1/2 15/16 AS-113
4-SMC-2-ORT 4-2 ZHBF5 1/4 1/8 1.375 .609 .703 .280 .187 1.094 9/16 3/4 AS-111
4-SMC-4-ORT 4-4 ZHBF5 1/4 1/4 1.516 .609 .703 .375 .187 1.219 9/16 15/16 AS-113
6-SMC-6-ORT 6-6 ZHBF5 3/8 3/8 1.625 .656 .766 .406 .281 1.344 11/16 1-1/8 AS-116
6-SMC-8-ORT 6-8 ZHBF5 3/8 1/2 1.859 .656 .766 .531 .281 1.562 11/16 1-3/8 AS-212
8-SMC-4-ORT 8-4 ZHBF5 1/2 1/4 1.687 .906 .875 .375 .281 1.281 7/8 15/16 AS-113
8-SMC-8-ORT 8-8 ZHBF5 1/2 1/2 1.969 .906 .859 .531 .406 1.562 7/8 1-3/8 AS-212
10-SMC-12-ORT 10-12 ZHBF5 5/8 3/4 2.062 .969 .875 .562 .500 1.656 1 1-1/2 AS-215
12-SMC-12-ORT 12-12 ZHBF5 3/4 3/4 2.062 .969 .875 .562 .625 1.656 1-1/8 1-1/2 AS-215
O-Ring Pipe Thread MaleConnector
16 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
**NOTE: Stainless steel and carbon steel o-seal fittings up to 1 inch are rated to 3000 psi.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
*NOTE: All dimensions subject to change, to be used for reference only.
**NOTE: Stainless steel and carbon steel o-seal fittings up to 1 inch are rated to 3000 psi.
SPCUSPCUSPCU
PART INTERCHANGES T A B ENUMBER WITH TUBE O.D. THRU HOLE1-SPCU-1 1-1 ZPC 1/16 .687 .437 .031
2-SPCU-2 2-2 ZPC 1/8 .969 .656 .078
4-SPCU-4 4-4 ZPC 1/4 1.078 .765 .156
5-SPCU-5 5-5 ZPC 5/16 1.125 .812 .219
6-SPCU-6 6-6 ZPC 3/8 1.156 .843 .281
8-SPCU-8 8-8 ZPC 1/2 1.594 1.109 .375
12-SPCU-12 12-12 ZPC 3/4 1.656 1.156 .578
16-SPCU-16 16-16 ZPC 1 2.125 1.437 .812
Port Connector Union
17For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
SRATTSRATTSRATT
PART iNTERCHANGES T1 T2 A B C E L NH BHNUMBER WITH TUBE O.D. TUBE O.D. THRU HOLE NUT HEX BODY HEX1-SRATT-2 2-1 TRBZ 1/16 1/8 1.187 .344 .437 .052 1.031 5/16 5/16
1-SRATT-4 4-1 TRBZ 1/16 1/4 1.281 .344 .437 .052 1.125 5/16 5/16
2-SRATT-1 1-2 TRBZ 1/8 1/16 1.250 .500 .609 .031 .984 7/16 7/16
2-SRATT-2 2-2 TRBZ 1/8 1/8 1.375 .500 .609 .078 1.109 7/16 7/16
2-SRATT-3 3-2 TRBZ 1/8 3/16 1.422 .500 .609 .094 1.156 7/16 7/16
2-SRATT-4 4-2 TRBZ 1/8 1/4 1.453 .500 .609 .094 1.187 7/16 7/16
2-SRATT-6 6-2 TRBZ 1/8 3/8 1.562 .500 .609 .094 1.296 7/16 7/16
2-SRATT-8 8-2 TRBZ 1/8 1/2 1.828 .500 .609 .094 1.562 7/16 9/16
3-SRATT-2 2-3 TRBZ 3/16 1/8 1.406 .547 .625 .078 1.141 1/2 7/16
3-SRATT-4 4-3 TRBZ 3/16 1/4 1.484 .547 .625 .125 1.218 1/2 7/16
4-SRATT-2 2-4 TRBZ 1/4 1/8 1.484 .609 .703 .078 1.187 9/16 1/2
4-SRATT-4 4-4 TRBZ 1/4 1/4 1.562 .609 .703 .156 1.265 9/16 1/2
4-SRATT-5 5-4 TRBZ 1/4 5/16 1.609 .609 .703 .187 1.312 9/16 1/2
4-SRATT-6 6-4 TRBZ 1/4 3/8 1.656 .609 .703 .187 1.359 9/16 1/2
4-SRATT-8 8-4 TRBZ 1/4 1/2 1.922 .609 .703 .187 1.625 9/16 9/16
4-SRATT-10 10-4 TRBZ 1/4 5/8 2.000 .609 .703 .187 1.703 9/16 11/16
5-SRATT-6 6-5 TRBZ 5/16 3/8 1.687 .641 .734 .250 1.390 5/8 9/16
5-SRATT-8 8-5 TRBZ 5/16 1/2 1.953 .641 .734 .250 1.656 5/8 9/16
6-SRATT-6 6-6 TRBZ 3/8 3/8 1.734 .656 .766 .281 1.437 11/16 5/8
6-SRATT-10 10-6 TRBZ 3/8 5/8 2.062 .656 .766 .281 1.765 11/16 11/16
6-SRATT-12 12-6 TRBZ 3/8 3/4 2.078 .656 .766 .281 1.781 11/16 13/16
8-SRATT-4 4-8 TRBZ 1/2 1/4 1.796 .906 .859 .156 1.390 7/8 13/16
8-SRATT-6 6-8 TRBZ 1/2 3/8 1.890 .906 .859 .281 1.484 7/8 13/16
8-SRATT-8 8-8 TRBZ 1/2 1/2 2.140 .906 .859 .375 1.734 7/8 13/16
8-SRATT-10 10-8 TRBZ 1/2 5/8 2.187 .906 .859 .406 1.781 7/8 13/16
8-SRATT-12 12-8 TRBZ 1/2 3/4 2.187 .906 .859 .406 1.781 7/8 13/16
8-SRATT-16 16-8 TRBZ 1/2 1 2.546 .906 .859 .406 2.140 7/8 1-1/16
10-SRATT-12 12-10 TRBZ 5/8 3/4 2.218 .969 .859 .500 1.812 1 15/16
10-SRATT-14 14-10 TRBZ 5/8 7/8 2.265 .969 .859 .500 1.859 1 15/16
10-SRATT-16 16-10 TRBZ 5/8 1 2.484 .969 .859 .500 2.078 1 1-1/16
12-SRATT-8 8-12 TRBZ 3/4 1/2 2.234 .969 .859 .375 1.828 1-1/8 1-1/16
12-SRATT-16 16-12 TRBZ 3/4 1 2.546 .969 .859 .625 2.140 1-1/8 1-1/16
Reducer AdapterTube to Tube
18 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
*NOTE: All dimensions subject to change, to be used for reference only.
SRPCSRPCSRPC
PART INTERCHANGES T1 T2 A B ENUMBER WITH TUBE O.D. TUBE O.D. THRU HOLE2-SRPC-1 1-2 ZPC 1/8 1/16 .906 .437 .0314-SRPC-1 1-4 ZPC 1/4 1/16 .968 .437 .031
4-SRPC-2 2-4 ZPC 1/4 1/8 1.078 .562 .078
6-SRPC-2 2-6 ZPC 3/8 1/8 1.109 .562 .078
6-SRPC-4 4-6 ZPC 3/8 1/4 1.156 .640 .156
8-SRPC-4 4-8 ZPC 1/2 1/4 1.359 .640 .156
8-SRPC-6 6-8 ZPC 1/2 3/8 1.406 .718 .281
12-SRPC-8 8-12 ZPC 3/4 1/2 1.718 .984 .375
Reducing PortConnector
19For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
SRUSRUSRU
PART INTERCHANGES T1 T2 A B1 B2 C1 C2 D E L NH1 NH2 BHNUMBER WITH TUBE. TUBE THRU NUT NUT BODY
O.D. O.D. HOLE HEX HEX HEX2-SRU-1 2-1 HBZ 1/8 1/16 1.219 .500 .344 .609 .437 .343 .052 .812 7/16 5/16 7/16
3-SRU-1 3-1 HBZ 3/16 1/16 1.266 .547 .344 .625 .437 .375 .052 .859 1/2 5/16 7/16
3-SRU-2 3-2 HBZ 3/16 1/8 1.437 .547 .500 .625 .609 .375 .094 .922 1/2 7/16 7/16
4-SRU-2 4-2 HBZ 1/4 1/8 1.516 .609 .500 .703 .609 .406 .094 .969 9/16 7/16 1/2
4-SRU-3 4-3 HBZ 1/4 3/16 1.547 .609 .547 .703 .625 .406 .125 1.000 9/16 1/2 1/2
5-SRU-2 5-2 HBZ 5/16 1/8 1.578 .641 .500 .734 .609 .437 .094 1.016 5/8 7/16 9/16
5-SRU-4 5-4 HBZ 5/16 1/4 1.656 .641 .609 .734 .703 .437 .187 1.078 5/8 9/16 9/16
6-SRU-1 6-1 HBZ 3/8 1/16 1.437 .656 .344 .765 .437 .468 .052 1.000 11/16 5/16 5/8
6-SRU-2 6-2 HBZ 3/8 1/8 1.609 .656 .500 .765 .609 .468 .094 1.062 11/16 7/16 5/8
6-SRU-4 6-4 HBZ 3/8 1/4 1.703 .656 .609 .765 .703 .468 .187 1.125 11/16 9/16 5/8
6-SRU-5 6-5 HBZ 3/8 5/16 1.734 .656 .641 .765 .734 .468 .250 1.156 11/16 5/8 5/8
8-SRU-2 8-2 HBZ 1/2 1/8 1.781 .906 .500 .859 .609 .468 .094 1.125 7/8 7/16 13/16
8-SRU-4 8-4 HBZ 1/2 1/4 1.859 .906 .609 .859 .703 .468 .187 1.156 7/8 9/16 13/16
8-SRU-6 8-6 HBZ 1/2 3/8 1.906 .906 .656 .859 .765 .468 .281 1.219 7/8 11/16 13/16
10-SRU-6 10-6 HBZ 5/8 3/8 1.937 .969 .656 .859 .765 .468 .281 1.250 1 11/16 15/16
10-SRU-8 10-8 HBZ 5/8 1/2 2.047 .969 .906 .859 .859 .468 .406 1.250 1 7/8 15/16
12-SRU-4 12-4 HBZ 3/4 1/4 1.937 .969 .609 .859 .703 .468 .187 1.250 1-1/8 9/16 1-1/16
12-SRU-6 12-6 HBZ 3/4 3/8 2.000 .969 .656 .859 .765 .468 .281 1.312 1-1/8 11/16 1-1/16
12-SRU-8 12-8 HBZ 3/4 1/2 2.109 .969 .906 .859 .859 .468 .406 1.312 1-1/8 7/8 1-1/16
12-SRU-10 12-10 HBZ 3/4 5/8 2.109 .969 .969 .859 .859 .468 .500 1.312 1-1/8 1 1-1/16
16-SRU-12 16-12 HBZ 1 3/4 2.469 1.234 .969 1.047 .859 .562 .625 1.594 1-1/2 1-1/8 1-3/8
Reducing Union
20 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
STBWSTBWSTBW
PART INTERCHANGES T BW A B C D E1
L NH BHNUMBER WITH TUBE O.D. THRU HOLE NUT HEX BODY HEX
2-STBW-2 2-1/8 ZHBW2 1/8 .405 1.203 .500 .609 .375 .094 .937 7/16 7/16
3-STBW-2 3-1/8 ZHBW2 3/16 .405 1.234 .547 .625 .375 .125 .969 1/2 7/16
4-STBW-2 4-1/8 ZHBW2 1/4 .405 1.297 .609 .703 .375 .187 1.000 9/16 1/2
4-STBW-4 4-1/4 ZHBW2 1/4 .540 1.484 .609 .703 .562 .187 1.203 9/16 9/16
5-STBW-4 5-1/4 ZHBW2 5/16 .540 1.516 .641 .734 .562 .250 1.234 5/8 9/16
6-STBW-4 6-1/4 ZHBW2 3/8 .540 1.578 .656 .766 .562 .281 1.281 11/16 5/8
6-STBW-6 6-3/8 ZHBW2 3/8 .675 1.578 .656 .766 .562 .281 1.281 11/16 3/4
6-STBW-8 6-1/2 ZHBW2 3/8 .840 1.828 .656 .766 .750 .281 1.531 11/16 7/8
8-STBW-6 8-3/8 ZHBW2 1/2 .675 1.719 .906 .859 .562 .406 1.312 7/8 13/16
8-STBW-8 8-1/2 ZHBW2 1/2 .840 1.937 .906 .859 .750 .406 1.531 7/8 7/8
8-STBW-12 8-3/4 ZHBW2 1/2 1.050 1.984 .906 .859 .750 .406 1.594 7/8 1-1/16
10-STBW-8 10-1/2 ZHBW2 5/8 .840 1.937 .969 .859 .750 .500 1.531 1 15/16
12-STBW-12 12-3/4 ZHBW2 3/4 1.050 1.984 .969 .859 .750 .625 1.594 1-1/8 1-1/16
16-STBW-16 16-1 ZHBW2 1 1.315 2.453 1.234 1.047 .937 .875 1.969 1-1/2 1-3/8
Tube to Butt WeldConnector
21For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
STSWSTSWSTSW
PART INTERCHANGES T1 T2 A B C D E F G L NH BHNUMBER WITH TUBE TUBE THRU NUT BODY
O.D. O.D. HOLE HEX HEX
2-STSW-2 2-2 ZHBW 1/8 1/8 1.141 .500 .609 .344 .094 .312 .250 .875 7/16 7/16
3-STSW-3 3-3 ZHBW 3/16 3/16 1.203 .547 .641 .375 .125 .406 .281 .937 1/2 7/16
4-STSW-4 4-4 ZHBW 1/4 1/4 1.328 .609 .703 .406 .187 .437 .312 1.031 9/16 1/2
6-STSW-6 6-6 ZHBW 3/8 3/8 1.484 .656 .766 .469 .281 .625 .375 1.187 11/16 5/8
8-STSW-8 8-8 ZHBW 1/2 1/2 1.625 .906 .859 .469 .406 .750 .500 1.219 7/8 13/16
10-STSW-10 10-10 ZHBW 5/8 5/8 1.656 .969 .859 .469 .500 .922 .500 1.250 1 15/16
12-STSW-12 12-12 ZHBW 3/4 3/4 1.719 .969 .859 .469 .625 1.047 .562 1.312 1-1/8 1-1/16
16-STSW-16 16-16 ZHBW 1 1 2.078 1.234 1.047 .562 .875 1.312 .750 1.594 1-1/2 1-3/8
Tube to Socket WeldConnector
22 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
*NOTE: All dimensions subject to change, to be used for reference only.
SUSUSU
PART INTERCHANGES T A B C D E L NH BHNUMBER WITH TUBE O.D. THRU HOLE NUT HEX BODY HEX
1-SU 1-1 HBZ 1/16 .984 .344 .437 .281 .052 .687 5/16 5/16
2-SU 2-2 HBZ 1/8 1.406 .500 .609 .343 .094 .875 7/16 7/16
3-SU 3-3 HBZ 3/16 1.469 .547 .625 .375 .125 .953 1/2 7/16
4-SU 4-4 HBZ 1/4 1.609 .609 .703 .406 .187 1.031 9/16 1/2
5-SU 5-5 HBZ 5/16 1.687 .641 .734 .437 .250 1.109 5/8 9/16
6-SU 6-6 HBZ 3/8 1.766 .656 .766 .468 .281 1.187 11/16 5/8
8-SU 8-8 HBZ 1/2 2.016 .906 .859 .468 .406 1.219 7/8 13/16
10-SU 10-10 HBZ 5/8 2.047 .969 .859 .468 .500 1.250 1 15/16
12-SU 12-12 HBZ 3/4 2.109 .969 .859 .468 .625 1.312 1-1/8 1-1/16
14-SU 14-14 HBZ 7/8 2.187 1.016 .859 .468 .718 1.375 1-1/4 1-3/16
16-SU 16-16 HBZ 1 2.547 1.234 1.047 .562 .875 1.594 1-1/2 1-3/8
Union
23For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
SUANFSUANFSUANF
PART INTERCHANGES T J A B C D E1
L NH BHNUMBER WITH TUBE O.D. THREAD THRU HOLE NUT HEX BODY HEX
2-SUANF-2 2-2 XHBZ 1/8 5/16-24 1.234 .500 .609 .448 .062 .984 7/16 7/16
2-SUANF-4 4-2 XHBZ 1/8 7/16-20 1.375 .500 .609 .550 .094 1.125 7/16 1/2
3-SUANF-3 3-3 XHBZ 3/16 3/8-24 1.328 .547 .641 .479 .125 1.062 1/2 7/16
4-SUANF-4 4-4 XHBZ 1/4 7/16-20 1.484 .609 .703 .550 .172 1.187 9/16 1/2
5-SUANF-5 5-5 XHBZ 5/16 1/2-20 1.516 .641 .734 .550 .234 1.219 5/8 9/16
6-SUANF-4 4-6 XHBZ 3/8 7/16-20 1.562 .656 .766 .550 .172 1.266 11/16 5/8
6-SUANF-6 6-6 XHBZ 3/8 9/16-18 1.562 .656 .766 .556 .297 1.266 11/16 5/8
8-SUANF-8 8-8 XHBZ 1/2 3/4-16 1.812 .906 .859 .657 .391 1.406 7/8 13/16
10-SUANF-10 10-10 XHBZ 5/8 7/8-14 1.937 .969 .875 .758 .484 1.531 1 15/16
12-SUANF-12 12-12 XHBZ 3/4 1-1/16-12 2.109 .969 .859 .864 .609 1.703 1-1/8 1-1/8
16-SUANF-16 16-16 XHBZ 1 1-5/16-12 2.422 1.234 1.047 .911 .844 1.937 1-1/2 1-3/8
Tube to AN Flare Union
24 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
*NOTE: All dimensions subject to change, to be used for reference only.
SELUSELUSELU
PART INTERCHANGES T A B C E L NH WNUMBER WITH TUBE O.D. THRU HOLE NUT HEX WRENCH FLAT1-SELU-1 1-1 EBZ 1/16 .750 .344 .437 .052 .609 5/16 7/16
2-SELU-2 2-2 EBZ 1/8 .875 .500 .609 .094 .625 7/16 3/8
3-SELU-3 3-3 EBZ 3/16 1.000 .547 .625 .125 .734 1/2 1/2
4-SELU-4 4-4 EBZ 1/4 1.062 .609 .703 .187 .766 9/16 1/2
5-SELU-5 5-5 EBZ 5/16 1.125 .640 .734 .250 .844 5/8 5/8
6-SELU-6 6-6 EBZ 3/8 1.203 .656 .766 .281 .906 11/16 5/8
8-SELU-8 8-8 EBZ 1/2 1.421 .906 .859 .406 1.016 7/8 13/16
10-SELU-10 10-10 EBZ 5/8 1.500 .969 .859 .500 1.109 1 15/16
12-SELU-12 12-12 EBZ 3/4 1.578 .969 .859 .625 1.171 1-1/8 1-1/16
14-SELU-14 14-14 EBZ 7/8 1.766 1.016 .859 .718 1.359 1-1/4 1-3/8
16-SELU-16 16-16 EBZ 1 1.937 1.234 1.047 .875 1.453 1-1/2 1-3/8
Union Elbow
25For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
SFESFESFE
PART INTERCHANGES T P A1 A2 B C E L NH WNUMBER WITH TUBE PIPE END THRU NUT WRENCH
O.D. NPT HOLE HEX FLAT1-SFE-2 1-2 DBZ 1/16 1/8 .812 .750 .500 .609 .052 .687 5/16 1/2
2-SFE-2 2-2 DBZ 1/8 1/8 .969 .750 .500 .609 .094 .719 7/16 1/2
2-SFE-4 2-4 DBZ 1/8 1/4 1.078 .875 .500 .609 .094 .828 7/16 11/16
3-SFE-2 3-2 DBZ 3/16 1/8 1.000 .750 .547 .625 .125 .734 1/2 1/2
4-SFE-2 4-2 DBZ 1/4 1/8 1.062 .750 .609 .703 .187 .781 9/16 1/2
4-SFE-4 4-4 DBZ 1/4 1/4 1.172 .875 .609 .703 .187 .875 9/16 11/16
4-SFE-6 4-6 DBZ 1/4 3/8 1.250 .875 .609 .703 .187 .969 9/16 13/16
4-SFE-8 4-8 DBZ 1/4 1/2 1.359 1.125 .609 .703 .187 1.078 9/16 1
5-SFE-2 5-2 DBZ 5/16 1/8 1.125 .750 .640 .734 .250 .844 5/8 9/16
5-SFE-4 5-4 DBZ 5/16 1/4 1.203 .875 .640 .734 .250 .906 5/8 11/16
6-SFE-2 6-2 DBZ 3/8 1/8 1.203 .750 .656 .766 .281 .906 11/16 5/8
6-SFE-4 6-4 DBZ 3/8 1/4 1.234 .875 .656 .766 .281 .937 11/16 11/16
6-SFE-6 6-6 DBZ 3/8 3/8 1.312 .875 .656 .766 .281 1.016 11/16 13/16
6-SFE-8 6-8 DBZ 3/8 1/2 1.429 1.125 .656 .766 .281 1.125 11/16 1-1/16
8-SFE-4 8-4 DBZ 1/2 1/4 1.429 .875 .906 .859 .406 1.016 7/8 13/16
8-SFE-6 8-6 DBZ 1/2 3/8 1.429 .875 .906 .859 .406 1.016 7/8 13/16
8-SFE-8 8-8 DBZ 1/2 1/2 1.531 1.125 .906 .859 .406 1.125 7/8 1-1/16
10-SFE-6 10-6 DBZ 5/8 3/8 1.500 .875 .969 .859 .500 1.109 1 15/16
10-SFE-8 10-8 DBZ 5/8 1/2 1.578 1.125 .969 .859 .500 1.171 1 1-1/16
12-SFE-8 12-8 DBZ 3/4 1/2 1.578 1.125 .969 .859 .625 1.171 1-1/8 1-1/16
12-SFE-12 12-12 DBZ 3/4 3/4 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8
14-SFE-12 14-12 DBZ 7/8 3/4 1.766 1.250 1.016 .859 .718 1.359 1-1/4 1-3/8
16-SFE-12 16-12 DBZ 1 3/4 1.937 1.250 1.234 1.049 .875 1.453 1-1/2 1-3/8
16-SFE-16 16-16 DBZ 1 1 1.984 1.500 1.234 1.049 .875 1.500 1-1/2 1-11/16
Female Elbow
26 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
*NOTE: All dimensions subject to change, to be used for reference only.
SMESMESME
PART INTERCHANGES T P A1 A2 B C D E1
L NH WNUMBER WITH TUBE PIPE END THRU NUT WRENCH
O.D. NPT HOLE HEX FLAT1-SME-1 1-1 CBZ 1/16 1/16 .703 .703 .344 .437 .375 .052 .609 5/16 3/8
1-SME-2 1-2 CBZ 1/16 1/8 .750 .703 .344 .437 .375 .052 .609 5/16 7/16
2-SME-1 2-1 CBZ 1/8 1/16 .937 .703 .500 .609 .375 .094 .672 7/16 7/16
2-SME-2 2-2 CBZ 1/8 1/8 .937 .703 .500 .609 .375 .094 .672 7/16 7/16
2-SME-4 2-4 CBZ 1/8 1/4 .969 .922 .500 .609 .562 .094 .719 7/16 1/2
2-SME-6 2-6 CBZ 1/8 3/8 1.203 1.125 .500 .609 .562 .094 .812 7/16 13/16
3-SME-2 3-2 CBZ 3/16 1/8 1.000 .734 .547 .625 .375 .125 .734 1/2 1/2
3-SME-4 3-4 CBZ 3/16 1/4 1.000 .922 .547 .625 .562 .125 .734 1/2 1/2
4-SME-1 4-1 CBZ 1/4 1/16 1.203 .734 .609 .703 .375 .156 .766 9/16 1/2
4-SME-2 4-2 CBZ 1/4 1/8 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2
4-SME-4 4-4 CBZ 1/4 1/4 1.062 .922 .609 .703 .562 .187 .766 9/16 1/2
4-SME-6 4-6 CBZ 1/4 3/8 1.172 1.031 .609 .703 .562 .187 .875 9/16 11/16
4-SME-8 4-8 CBZ 1/4 1/2 1.250 1.312 .609 .703 .750 .187 .969 9/16 13/16
4-SME-12 4-12 CBZ 1/4 3/4 1.546 1.500 .609 .703 .750 .187 1.093 9/16 1-1/16
5-SME-2 5-2 CBZ 5/16 1/8 1.125 .781 .641 .734 .375 .187 .844 5/8 9/16
5-SME-4 5-4 CBZ 5/16 1/4 1.125 .969 .641 .734 .562 .250 .844 5/8 9/16
5-SME-6 5-6 CBZ 5/16 3/8 1.203 1.031 .641 .734 .562 .250 .906 5/8 11/16
6-SME-2 6-2 CBZ 3/8 1/8 1.203 .812 .656 .766 .375 .187 .906 11/16 5/8
6-SME-4 6-4 CBZ 3/8 1/4 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8
6-SME-6 6-6 CBZ 3/8 3/8 1.234 1.031 .656 .766 .562 .281 .937 11/16 11/16
27For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Male Elbow
1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
*NOTE: All dimensions subject to change, to be used for reference only.
SMESMESME
PART INTERCHANGES T P A1 A2 B C D E1
L NH WNUMBER WITH TUBE PIPE END THRU NUT WRENCH
O.D. NPT HOLE HEX FLAT6-SME-8 6-8 CBZ 3/8 1/2 1.312 1.297 .656 .766 .750 .281 1.016 11/16 13/16
6-SME-12 6-12 CBZ 3/8 3/4 1.469 1.453 .656 .766 .750 .281 1.172 11/16 1-1/16
8-SME-2 8-2 CBZ 1/2 1/8 1.609 .937 .906 .859 .375 .187 1.009 7/8 13/16
8-SME-4 8-4 CBZ 1/2 1/4 1.422 1.109 .906 .859 .562 .281 1.016 7/8 13/16
8-SME-6 8-6 CBZ 1/2 3/8 1.422 1.109 .906 .859 .562 .375 1.016 7/8 13/16
8-SME-8 8-8 CBZ 1/2 1/2 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16
8-SME-12 8-12 CBZ 1/2 3/4 1.578 1.453 .906 .859 .750 .406 1.172 7/8 1-1/16
10-SME-4 10-4 CBZ 5/8 1/4 1.498 1.125 .969 .859 .562 .281 1.093 1 1
10-SME-6 10-6 CBZ 5/8 3/8 1.500 1.187 .969 .859 .562 .375 1.109 1 15/16
10-SME-8 10-8 CBZ 5/8 1/2 1.500 1.375 .969 .859 .750 .469 1.109 1 15/16
10-SME-12 10-12 CBZ 5/8 3/4 1.578 1.453 .969 .859 .750 .500 1.172 1 1-1/16
10-SME-16 10-16 CBZ 5/8 1 1.780 1.844 .969 .859 .937 .500 1.375 1 1-1/2
12-SME-4 12-4 CBZ 3/4 1/4 1.576 1.250 .969 .859 .562 .281 1.172 1-1/4 1-1/16
12-SME-6 12-6 CBZ 3/4 3/8 1.576 1.250 .969 .859 .562 .406 1.172 1-1/4 1-1/16
12-SME-8 12-8 CBZ 3/4 1/2 1.561 1.453 .969 .859 .750 .469 1.172 1-1/8 1-1/16
12-SME-12 12-12 CBZ 3/4 3/4 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16
14-SME-12 14-12 CBZ 7/8 3/4 1.766 1.641 1.016 .859 .750 .625 1.359 1-1/4 1-3/8
16-SME-4 16-4 CBZ 1 1/4 1.935 1.375 1.234 1.047 .562 .281 1.453 1-1/2 1-1/2
16-SME-8 16-8 CBZ 1 1/2 1.935 1.562 1.234 1.047 .750 .500 1.453 1-1/2 1-1/2
16-SME-12 16-12 CBZ 1 3/4 1.937 1.641 1.234 1.047 .937 .625 1.453 1-1/2 1-3/8
16-SME-16 16-16 CBZ 1 1 1.937 1.828 1.234 1.047 .937 .875 1.453 1-1/2 1-3/8
28 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Male Elbow
*NOTE: All dimensions subject to change, to be used for reference only.1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
*NOTE: All dimensions subject to change, to be used for reference only.
STBWESTBWESTBWE
PART INTERCHANGES T BW A1 A2 B C D E1
L NH WNUMBER WITH TUBE THRU NUT WRENCH
O.D. HOLE HEX FLAT2-STBWE-2 2-1/8 ZEBW2 1/8 .405 .922 .719 .516 .609 .344 .094 .656 7/16 1/2
3-STBWE-2 3-1/8 ZEBW2 3/16 .405 1.016 .734 .547 .641 .375 .125 .734 1/2 1/2
4-STBWE-2 4-1/8 ZEBW2 1/4 .405 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2
4-STBWE-4 4-1/4 ZEBW2 1/4 .540 1.062 .937 .609 .703 .562 .187 .766 9/16 1/2
6-STBWE-4 6-1/4 ZEBW2 3/8 .540 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8
8-STBWE-6 8-3/8 ZEBW2 1/2 .675 1.375 1.125 .906 .859 .562 .406 .969 7/8 13/16
8-STBWE-8 8-1/2 ZEBW2 1/2 .840 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16
10-STBWE-8 10-1/2 ZEBW2 5/8 .840 1.437 1.312 .969 .859 .750 .500 1.031 1 7/8
12-STBWE-12 12-3/4 ZEBW2 3/4 1.050 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16
16-STBWE-12 16-3/4 ZEBW2 1 1.050 1.937 1.625 1.234 1.047 .750 .875 1.453 1-1/2 1-3/8
16-STBWE-16 16-1 ZEBW2 1 1.315 1.937 1.844 1.234 1.047 .937 .875 1.453 1-1/2 1-3/8
29For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Tube to Butt Weld Elbow
1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
STSWESTSWESTSWE
PART INTERCHANGES T A1 A2 B C D E F L NH WNUMBER WITH TUBE THRU NUT WRENCH
O.D. HOLE HEX FLAT2-STSWE-2 2-2 ZEBW 1/8 .922 .625 .516 .609 .156 .094 .375 .656 7/16 5/16
3-STSWE-3 3-3 ZEBW 3/16 .984 .687 .547 .641 .203 .125 .437 .719 1/2 7/16
4-STSWE-4 4-4 ZEBW 1/4 1.062 .766 .609 .703 .312 .187 .500 .766 9/16 1/2
6-STSWE-6 6-6 ZEBW 3/8 1.203 .906 .656 .766 .375 .281 .625 .875 11/16 5/8
8-STSWE-8 8-8 ZEBW 1/2 1.422 1.016 .906 .859 .500 .406 .812 1.016 7/8 13/16
10-STSWE-10 10-10 ZEBW 5/8 1.562 1.156 .969 .875 .500 .500 .937 1.156 1 1-1/16
12-STSWE-12 12-12 ZEBW 3/4 1.562 1.312 .969 .875 .562 .625 1.094 1.156 1-1/8 1-1/16
16-STSWE-16 16-16 ZEBW 1 1.937 1.469 1.234 1.047 .750 .875 1.375 1.453 1-1/2 1-3/8
Tube to SocketWeld Elbow
30 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
*NOTE: All dimensions subject to change, to be used for reference only.
STFTSTFTSTFT
PART INTERCHANGES T P A A1 A2 B C E L NH WNUMBER WITH TUBE PIPE END THRU NUT WRENCH
O.D. NPT HOLE HEX FLAT2-STFT-2 2-2-2 MBZ 1/8 1/8 1.719 .969 .750 .500 .609 .094 .719 7/16 1/2
3-STFT-2 3-2-3 MBZ 3/16 1/8 1.766 1.016 .750 .547 .641 .125 .750 1/2 9/16
4-STFT-2 4-2-4 MBZ 1/4 1/8 1.812 1.078 .750 .609 .703 .187 .781 9/16 9/16
4-STFT-4 4-4-4 MBZ 1/4 1/4 2.047 1.172 .875 .609 .703 .187 .875 9/16 11/16
5-STFT-2 5-2-5 MBZ 5/16 1/8 1.922 1.172 .750 .641 .734 .250 .875 5/8 5/8
6-STFT-4 6-4-6 MBZ 3/8 1/4 2.109 1.234 .875 .656 .766 .281 .937 11/16 11/16
8-STFT-4 8-4-8 MBZ 1/2 1/4 2.562 1.437 .875 .906 .875 .406 1.016 7/8 13/16
8-STFT-6 8-6-8 MBZ 1/2 3/8 2.297 1.422 .875 .906 .859 .406 1.016 7/8 13/16
8-STFT-8 8-8-8 MBZ 1/2 1/2 2.687 1.578 1.125 .906 .859 .406 1.172 7/8 1-1/16
10-STFT-8 10-8-10 MBZ 5/8 1/2 2.656 1.531 1.125 .969 .875 .500 1.125 1 1-1/16
12-STFT-12 12-12-12 MBZ 3/4 3/4 3.016 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8
14-STFT-12 14-12-14 MBZ 7/8 3/4 3.016 1.766 1.250 1.031 .875 .719 1.359 1-1/4 1-3/8
16-STFT-12 16-12-16 MBZ 1 3/4 3.187 1.937 1.250 1.234 1.047 .875 1.453 1-1/2 1-3/8
16-STFT-16 16-16-16 MBZ 1 1 3.516 2.016 1.500 1.234 1.047 .875 1.531 1-1/2 1-5/8
Female Run Tee
31For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
STMTSTMTSTMT
Male Run Tee
32 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
*Both tube ends are typical.
PART INTERCHANGES T P A A1 A2 B C D E1
L NH WNUMBER WITH TUBE PIPE END THRU NUT WRENCH
O.D. NPT HOLE HEX FLAT2-STMT-2 2-2-2 RBZ 1/8 1/8 1.625 .937 .703 .500 .609 .375 .094 .672 7/16 7/16
3-STMT-2 3-2-3 RBZ 3/16 1/8 1.656 .969 .703 .547 .625 .375 .125 .703 1/2 7/16
4-STMT-2 4-2-4 RBZ 1/4 1/8 1.797 1.062 .734 .609 .703 .375 .187 .766 9/16 1/2
4-STMT-4 4-4-4 RBZ 1/4 1/4 1.984 1.062 .922 .609 .703 .562 .187 .766 9/16 5/8
5-STMT-2 5-2-5 RBZ 5/16 1/8 1.984 1.172 .828 .641 .725 .375 .187 .875 5/8 5/8
6-STMT-4 6-4-6 RBZ 3/8 1/4 2.203 1.203 1.000 .656 .766 .562 .281 .906 11/16 5/8
6-STMT-6 6-6-6 RBZ 3/8 3/8 2.422 1.312 1.109 .656 .766 .562 .281 1.016 11/16 13/16
8-STMT-6 8-6-8 RBZ 1/2 3/8 2.531 1.422 1.109 .906 .859 .562 .375 1.016 7/8 13/16
8-STMT-8 8-8-8 RBZ 1/2 1/2 2.719 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16
10-STMT-8 10-8-10 RBZ 5/8 1/2 2.875 1.500 1.375 .969 .859 .750 .469 1.109 1 15/16
12-STMT-12 12-12-12 RBZ 3/4 3/4 3.016 1.578 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16
14-STMT-12 14-12-14 RBZ 7/8 3/4 3.266 1.766 1.500 1.031 .875 .750 .625 1.359 1-1/4 1-5/16
16-STMT-12 16-12-16 RBZ 1 3/4 3.609 1.937 1.656 1.234 1.047 .750 .625 1.453 1-1/2 1-5/16
16-STMT-16 16-16-16 RBZ 1 1 3.781 1.937 1.844 1.234 1.047 .937 .875 1.453 1-1/2 1-3/8
1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
*NOTE: All dimensions subject to change, to be used for reference only.
*Both tube ends are typical.
STTFSTTFSTTF
PART INTERCHANGES T P A A1 A2 B C E L NH WNUMBER WITH TUBE PIPE END THRU NUT WRENCH
O.D. NPT HOLE HEX FLAT2-STTF-2 2-2-2 OBZ 1/8 1/8 1.937 .969 .750 .500 .609 .094 .719 7/16 1/2
3-STTF-2 3-3-2 OBZ 3/16 1/8 2.016 1.016 .750 .547 .641 .125 .750 1/2 1/2
4-STTF-2 4-4-2 OBZ 1/4 1/8 2.125 1.062 .750 .609 .703 .187 .766 9/16 1/2
4-STTF-4 4-4-4 OBZ 1/4 1/4 2.344 1.172 .875 .609 .703 .187 .875 9/16 11/16
5-STTF-2 5-5-2 OBZ 5/16 1/8 2.344 1.172 .750 .641 .734 .250 .875 5/8 5/8
6-STTF-4 6-6-4 OBZ 3/8 1/4 2.469 1.234 .875 .656 .766 .281 .937 11/16 11/16
8-STTF-4 8-8-4 OBZ 1/2 1/4 2.844 1.422 .875 .906 .859 .406 1.016 7/8 13/16
8-STTF-6 8-8-6 OBZ 1/2 3/8 2.844 1.422 .875 .906 .859 .406 1.016 7/8 13/16
8-STTF-8 8-8-8 OBZ 1/2 1/2 3.062 1.531 1.125 .906 .859 .406 1.125 7/8 1-1/16
10-STTF-8 10-10-8 OBZ 5/8 1/2 3.062 1.531 1.125 .969 .859 .500 1.125 1 1-1/16
12-STTF-12 12-12-12 OBZ 3/4 3/4 3.516 1.766 1.250 .969 .859 .625 1.359 1-1/8 1-3/8
14-STTF-12 14-14-12 OBZ 7/8 3/4 3.016 1.766 1.250 1.031 .875 .719 1.359 1-1/4 1-3/8
16-STTF-12 16-16-12 OBZ 1 3/4 3.859 1.937 1.250 1.234 1.047 .875 1.453 1-1/2 1-3/8
16-STTF-16 16-16-16 OBZ 1 1 3.969 1.984 1.500 1.234 1.047 .875 1.500 1-1/2 1-5/8
Female Branch Tee
33For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
STTMSTTMSTTM
PART INTERCHANGES T P A A1 A2 B C D E1
L NH WNUMBER WITH TUBE PIPE END THRU NUT WRENCH
O.D. NPT HOLE HEX FLAT2-STTM-2 2-2-2 SBZ 1/8 1/8 1.859 .937 .703 .500 .609 .375 .094 .672 7/16 7/16
2-STTM-4 2-2-4 SBZ 1/8 1/4 1.937 .969 .922 .500 .609 .562 .094 .719 7/16 1/2
3-STTM-2 3-3-2 SBZ 3/16 1/8 1.922 .969 .703 .547 .625 .375 .125 .703 1/2 7/16
4-STTM-2 4-4-2 SBZ 1/4 1/8 2.125 1.062 .734 .609 .703 .375 .187 .765 9/16 1/2
4-STTM-4 4-4-4 SBZ 1/4 1/4 2.125 1.062 .922 .609 .703 .562 .187 .765 9/16 1/2
5-STTM-2 5-5-2 SBZ 5/16 1/8 2.344 1.172 .828 .641 .725 .375 .187 .875 5/8 5/8
6-STTM-4 6-6-4 SBZ 3/8 1/4 2.406 1.203 1.000 .656 .765 .562 .281 .906 11/16 5/8
6-STTM-6 6-6-6 SBZ 3/8 3/8 2.625 1.312 1.109 .656 .765 .562 .281 1.016 11/16 13/16
8-STTM-6 8-8-6 SBZ 1/2 3/8 2.844 1.422 1.109 .906 .859 .562 .375 1.016 7/8 13/16
8-STTM-8 8-8-8 SBZ 1/2 1/2 2.844 1.422 1.297 .906 .859 .750 .406 1.016 7/8 13/16
10-STTM-8 10-10-8 SBZ 5/8 1/2 3.062 1.531 1.406 .969 .859 .750 .469 1.125 1 1
12-STTM-12 12-12-12 SBZ 3/4 3/4 3.141 1.172 1.453 .969 .859 .750 .625 1.172 1-1/8 1-1/16
14-STTM-12 14-14-12 SBZ 7/8 3/4 3.516 1.766 1.500 1.031 .875 .750 .750 1.359 1-1/4 1-3/8
16-STTM-12 16-16-12 SBZ 1 3/4 3.875 1.937 1.656 1.234 1.047 .750 .625 1.453 1-1/2 1-3/8
16-STTM-16 16-16-16 SBZ 1 1 3.875 1.937 1.843 1.234 1.047 .937 .875 1.453 1-1/2 1-3/8
Male Branch Tee
34 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
*Both tube ends are typical.
1 The E dimension is the minimum opening. These fittings may have a larger opening at the pipe/straight thread end.
*NOTE: All dimensions subject to change, to be used for reference only.
*All tube ends are typical.
STTTSTTTSTTT
PART INTERCHANGES T A A1 B C E L NH WNUMBER WITH TUBE O.D. THRU HOLE NUT HEX WRENCH FLAT1-STTT-1 1-1-1 JBZ 1/16 1.406 .703 .344 .437 .052 .547 5/16 3/8
2-STTT-2 2-2-2 JBZ 1/8 1.766 .875 .500 .609 .094 .625 7/16 3/8
3-STTT-3 3-3-3 JBZ 3/16 1.922 .969 .547 .625 .125 .703 1/2 7/16
4-STTT-4 4-4-4 JBZ 1/4 2.125 1.062 .609 .703 .187 .766 9/16 1/2
5-STTT-5 5-5-5 JBZ 5/16 2.344 1.172 .641 .734 .250 .875 5/8 5/8
6-STTT-6 6-6-6 JBZ 3/8 2.406 1.203 .656 .766 .281 .906 11/16 5/8
8-STTT-8 8-8-8 JBZ 1/2 2.844 1.422 .906 .859 .406 1.016 7/8 13/16
10-STTT-10 10-10-10 JBZ 5/8 3.062 1.531 .969 .859 .500 1.125 1 1-1/16
12-STTT-12 12-12-12 JBZ 3/4 3.141 1.578 .969 .859 .625 1.172 1-1/8 1-1/16
14-STTT-14 14-14-14 JBZ 7/8 3.516 1.766 1.016 .859 .718 1.359 1-1/4 1-3/8
16-STTT-16 16-16-16 JBZ 1 3.859 1.937 1.234 1.047 .875 1.453 1-1/2 1-3/8
Union Tee
35For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
SCRSCRSCR
PART INTERCHANGES T A A1 B C E L NH WNUMBER WITH TUBE O.D. THRU HOLE NUT HEX WRENCH FLAT2-SCR 2-2-2 JBZ 1/8 1.766 .875 .500 .609 .094 .625 7/16 3/8
4-SCR 4-4-4 JBZ 1/4 2.125 1.062 .609 .703 .187 .766 9/16 1/2
5-SCR 5-5-5 JBZ 5/16 2.344 1.172 .641 .734 .250 .875 5/8 5/8
6-SCR 6-6-6 JBZ 3/8 2.406 1.203 .656 .766 .281 .906 11/16 5/8
8-SCR 8-8-8 JBZ 1/2 2.844 1.422 .906 .859 .406 1.016 7/8 13/16
12-SCR 12-12-12 JBZ 3/4 3.016 1.516 .969 .859 .625 1.109 1-1/8 1-1/16
16-SCR 16-16-16 JBZ 1 3.687 1.844 1.234 1.047 .875 1.359 1-1/2 1-3/8
Union Cross
*NOTE: All dimensions subject to change, to be used for reference only.
*All tube ends are typical.
36 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
SBISBISBI
PART T W A E F LNUMBER TUBE O.D. REF. THRU HOLE TUBE I.D.3-SBI-031 3/16 .031 .566 .062 1/8 .518
4-SBI-022 1/4 .022 .566 .141 13/64 .518
4-SBI-031 1/4 .031 .566 .125 3/16 .518
4-SBI-040 1/4 .040 .566 .109 11/64 .518
4-SBI-062 1/4 .062 .566 .062 1/8 .518
5-SBI-031 5/16 .031 .566 .187 1/4 .518
5-SBI-062 5/16 .062 .566 .125 3/16 .518
5-SBI-094 5/16 .094 .566 .062 1/8 .518
5-SBI-103 5/16 .103 .566 .045 7/64 .518
6-SBI-049 3/8 .049 .566 .218 9/32 .518
6-SBI-062 3/8 .062 .566 .187 1/4 .518
6-SBI-094 3/8 .094 .566 .125 3/16 .518
6-SBI-159 3/8 .159 .566 .032 1/16 .518
8-SBI-035 1/2 .035 .750 .375 7/16 .702
8-SBI-049 1/2 .049 .750 .344 13/32 .702
8-SBI-062 1/2 .062 .750 .312 3/8 .702
8-SBI-125 1/2 .125 .750 .187 1/4 .702
10-SBI-049 5/8 .049 .750 .469 17/32 .702
10-SBI-062 5/8 .062 .750 .437 1/2 .702
10-SBI-125 5/8 .125 .750 .312 3/8 .702
10-SBI-187 5/8 .187 .750 .187 1/4 .702
12-SBI-049 3/4 .049 .750 .562 21/32 .702
12-SBI-062 3/4 .062 .750 .562 5/8 .702
12-SBI-125 3/4 .125 .750 .437 1/2 .702
14-SBI-049 7/8 .049 1.031 .687 25/32 .938
14-SBI-062 7/8 .062 1.031 .687 3/4 .938
14-SBI-125 7/8 .125 1.031 .562 5/8 .938
16-SBI-062 1 .062 1.031 .812 7/8 .938
16-SBI-125 1 .125 1.031 .687 3/4 .938
Barbed Insert
37For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
SPISPISPI
PART T W A E F LNUMBER TUBE O.D. REF. THRU HOLE TUBE I.D.3-SPI-031 3/16 .031 .566 .062 1/8 .518
4-SPI-022 1/4 .022 .566 .140 13/64 .518
4-SPI-031 1/4 .031 .566 .125 3/16 .518
4-SPI-040 1/4 .040 .566 .109 11/64 .518
5-SPI-062 5/16 .062 .566 .125 3/16 .518
5-SPI-094 5/16 .094 .566 .062 1/8 .518
6-SPI-049 3/8 .049 .566 .218 9/32 .518
6-SPI-062 3/8 .062 .566 .187 1/4 .518
6-SPI-094 3/8 .094 .566 .125 3/16 .518
8-SPI-035 1/2 .035 .750 .375 7/16 .702
8-SPI-049 1/2 .049 .750 .344 13/32 .702
8-SPI-062 1/2 .062 .750 .312 3/8 .702
8-SPI-125 1/2 .125 .750 .187 1/4 .702
10-SPI-049 5/8 .049 .750 .469 17/32 .702
10-SPI-062 5/8 .062 .750 .437 1/2 .702
10-SPI-125 5/8 .125 .750 .312 3/8 .702
12-SPI-049 3/4 .049 .750 .562 21/32 .702
12-SPI-062 3/4 .062 .750 .562 5/8 .702
12-SPI-125 3/4 .125 .750 .437 1/2 .702
14-SPI-049 7/8 .049 1.000 .687 25/32 .952
14-SPI-062 7/8 .062 1.000 .687 3/4 .952
14-SPI-125 7/8 .125 1.000 .562 5/8 .952
16-SPI-050 1 .050 1.000 .843 57/64 .952
16-SPI-062 1 .062 1.000 .812 7/8 .952
16-SPI-125 1 .125 1.000 .687 3/4 .952
Plane Insert
*NOTE: All dimensions subject to change, to be used for reference only.
38 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All dimensions subject to change, to be used for reference only.
SN/SKNSN/SKNSN/SKN
PART INTERCHANGES T A NHNUMBER WITH TUBE O.D. NUT HEXSN-1 1 BZ 1/16 .312 5/16
SN-2 2 BZ 1/8 .469 7/16
SN-3 3 BZ 3/16 .469 1/2
SN-4 4 BZ 1/4 .500 9/16
SN-5 5 BZ 5/16 .531 5/8
SN-6 6 BZ 3/8 .562 11/16
SN-8 8 BZ 1/2 .687 7/8
SN-10 10 BZ 5/8 .687 1
SN-12 12 BZ 3/4 .687 1-1/8
SN-14 14 BZ 7/8 .687 1-1/4
SN-16 16 BZ 1 .812 1-1/2
Nut
Knurled Nut
39For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
The knurled nut is used with fittings where applications of a finger tight assembly is acceptable.Common applications include, but are not limited to, low pressure laboratory use on plastic tubing.
Knurled nuts are available in the same sizes as shown for CS-Lok® nuts (SN).The knurled nut part descriptor is SKN. For example, the part number for a 1/2" knurled nut is SS-SKN-8.
Nut/Collet Sets
COLLETSSC/SCSET/SNCSETSC/SCSET/SNCSET
PART INTERCHANGES TNUMBER WITH TUBE O.D.SC-1 1 TZ 1/16
SC-2 2 TZ 1/8
SC-3 3 TZ 3/16
SC-4 4 TZ 1/4
SC-5 5 TZ 5/16
SC-6 6 TZ 3/8
SC-8 8 TZ 1/2
SC-10 10 TZ 5/8
SC-12 12 TZ 3/4
SC-14 14 TZ 7/8
SC-16 16 TZ 1
PART INTERCHANGES QUANTITYNUMBER WITH TUBE O.D. (per arbor)
SCSET-4-10 4 CPI-SET 1/4
SCSET-6-10 6 CPI-SET 3/8
SCSET-8-10 8 CPI-SET 1/2 10
SCSET-12-10 12 CPI-SET 3/4
SCSET-16-10 16 CPI-SET 1
Single Collet(Ferrule)
Collet Sets
*NOTE: All dimensions subject to change, to be used for reference only.
40 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
*NOTE: All Dimensions Subject to Change.
Collet sets and Nut/Collet sets make for easy storage and handling of nuts and single collets. CS-Lok® componentparts are precision made and should be handled with care. The components can be ordered on an arbor, whichaids in careful handling and prevents them from coming off. Pinch the end of the arbor to release the components.
Collet Sets contain 10 collets on an arbor.1/2" Collet Set part number: SS-SCSET-8-10
Nut/Collet Sets contain 5 nuts & 5 collets on an arbor.1/2" Nut/Collet Set part number: SS-SNCSET-8-5
PART QUANTITYNUMBER TUBE O.D. (per arbor)
SNCSET-4-5 1/4
SNCSET-6-5 3/8
SNCSET-8-5 1/2 5
SNCSET-12-5 3/4
SNCSET-16-5 1
Component Replacement Parts
TYLOKTYLOKTYLOK
41For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
The Instrument Tee may be ordered with any standardtube or pipe size. When ordering, specify sizes in thefollowing order:1. Tube Size O.D2. Female Pipe Size3. Male Pipe SizeExample: 1/2" tube, 3/8" female pipe, 1/4" male pipe.
SS-8-STFM-6-4
A Thermocouple Connector can be furnished alreadybored through for an additional charge. When ordering:1. Select required size male connector. See pages
13 and 14 for a listing of available MaleConnectors.
2. Add the letters “BT” to designate bore through.Example: 4-SMC-2-BT
The Heat Exchanger Tee may be ordered in any stan-dard tube size. The process tube is bored through.When ordering, specify sizes in the following order:1. Jacket Tube O.D2. Process Tube O.D. followed by “BT” for bore
through designation3. Branch Tube O.D.Example: 1/2" tube, 1/4" tube bored through, 1/2" tube.
SS-8-STTT-4BT-8
Tylube™ is an anti-gall com-pound to be used on stainlesssteel, steel and nickel basedalloys. Temperature range to500°F. Not recommended forplastic and aluminum products.Tylube™ is made from distilledwater with inert ingredients andcontains no silicones, heavymetals, chlorine or sulfur. Fora complete list of ingredientsrequest an MSDS to be sureof its compatibility with yourinstallation. Available in 8 oz.plastic bottles.
Instrument Tee
Thermocouple Bore Through
Heat Exchanger Tee
Tylube™ Thread Lubricant
TYLOKTYLOKTYLOK
42 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
CS-Lok® Tube Fittings come completely assembled and ready for use, no dissassemby required. Although thereare some general guide lines to follow no special preparation of the tubing is necessary, reference page 43.In overhead applications Tylok recommends using a Pre-Set Tool, see page 46.
Tighten nut with wrench an additional number of turnsindicated above, while holding the fitting body with asecond wrench.
CS-Lok® Installation Instructions
Simply insert the tubing into the assembly making surethe tubing seats firmly against the shoulder of thebody and the nut is finger tight.
Size Tighten # Turn(s)1 1/16”2 1/8” 3/43 3/16”4 1/4”5 5/16”6 3/8”8 1/2” 1-1/410 5/8”12 3/4”14 7/8”16 1”
To Remove Tube and Re-Connect Tube FittingMark the location of the nut with reference to the body before disassembly. For reassembly, re-insert the tubinginto the body until it is seated. With proper size wrench, retighten nut to original location by realigning previousmarks. A noticeable amount of torque will develop when the nut is turned to original position. Next, rotate the nutslightly past original position to fully re-set the seal.
Mark the location of the nut with reference to the body. Back off the nut until it is clear of the body and removethe tubing from the fitting.
Size #1 Thru #3 Size #4 Thru #16(1/16" – 3/16") (1/4" – 1")
Finger Tight Plus Finger Tight Plus3/4 Turn 1-1/4 Turns
TYLOKTYLOKTYLOK
43
CS-Lok® Tubing Selection & PreparationIt is the responsibility of the Engineer to refer to thetechnical pages in this catalog to ensure selection ofthe proper tubing material, tubing compatibility with thefitting, media and tubing wall thickness. Following thestated recommendations will ensure a safe application,free of leaks. The entire system must be consideredwhen selecting the fitting.
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Proper selection of tubing is key to the performance of thefitting. When selecting the proper wall thickness andmaterial, all tubing should be compatible with the processfluid, temperature, application, flow and system pressure.
For proper sealing it is recommended that the tubing andfitting be of like material to allow for positive sealing (i.e.,stainless on stainless, brass on copper, steel on steel).Galvanic corrosion could occur if the tubing and fitting arenot of like material, with the exception of a brass fitting oncopper tubing.
When using stainless steel tubing, Tylok recommendsusing Type 304 or 316 fully annealed, seamless or weldedredrawn meeting ASTM-A-213, ASTM-A-269 or equivalent,with a suggested maximum hardness of 80 Rb.
For copper tubing, Tylok suggests using soft annealed,seamless tubing per ASTM-B75 or equivalent. Copperwater tube type K or L, soft annealed (Temper O) perASTM-B88 can also be used.
When using carbon steel, all tubing should be fullyannealed and conform to ASTM-A-179, or equivalent,with a maximum hardness of 72 Rb.
In general, all tubing should be free of nicks, scratches,imperfections of any kind and be suitable for bending.Out of round tubing that does not easily go through fittingcomponents should not be used. It is recommended thatthe charts be used for tube selection. Ideally, the tube endshould be cut square so that when it bottoms out insidethe fitting an extra seal is provided. Avoid installingcontaminated tubing into your system. For elevatedtemperatures see page 45.
CS-Lok® Tube Fittings swage the tubing to achieve itsseals. Thin wall tubing (wall thicknesses with workingpressures highlited in reverse text, in the charts) is notrecommended for Gas Service. For Gas Service seepage 44.
When using tubing of a thinner or thicker wall than shown,it is always recommended that you consult with your localDistributor or contact Tylok International directly if there isany doubt selecting tubing.
Values in reverse text are not recommended for Gas Service.
Note: Tables, calculated to the right, are suggested maximum workingpressure ratings, in accordance with ASME B31.3, but should be usedfor reference only. Tylok International, Inc., is not responsible for itsaccuracy nor designs using these figures. All compatible Tylok fittingswill withstand pressures above those listed for maximum tubingworking pressures.
75,000 PSI Tensile
Stainless SteelTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120
1/8" 8400 106003/16" 5500 7000 101001/4" 4000 5100 7500 101005/16" 4100 5900 80003/8" 3300 4800 66001/2" 2600 3800 5100 67005/8" 3000 4000 5200 61003/4" 2500 3300 4300 5000 58007/8" 2100 2800 3600 4200 49001" 2400 3200 3700 4200 4700
47,000 PSI Tensile
Carbon SteelTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120
1/8" 8100 102003/16" 5200 6700 96001/4" 3800 4900 7100 96005/16" 3800 5500 76003/8" 3100 4500 62001/2" 2300 3300 4500 60005/8" 2600 3500 4600 53503/4" 2200 2900 3800 4400 51007/8" 1800 2500 3200 3700 43001" 2100 2800 3200 3700 4200
SUGGESTED ALLOWABLE WORKINGPRESSURE TABLES (psig)
Note: For welded and drawn tubing, a derating factor must be utilized.For double welded tube, multiply the above pressure rating by .85;and for single welded tube by .80 (ANSI B 31, Table A-1B).
30,000 PSI Tensile
CopperTube Tube Wall Thickness (inches)SizeO.D. .028 .035 .049 .065 .083 .095 .109 .120
1/8" 2700 36003/16" 1800 2300 35001/4" 1300 1700 2500 36005/16" 1300 2000 28003/8" 1100 1600 23001/2" 800 1200 1700 22005/8" 900 1300 1700 19003/4" 800 1000 1400 1600 19007/8" 600 900 1100 1300 16001" 600 800 1000 1200 1400 1500
TYLOKTYLOKTYLOK
44 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Gap Gages can be purchased to ensure the Installerand Inspector that the nut has been properlytightened. Available upon request.
When fitting is properly tightened, gap gage shouldnot fit between nut and shoulder of body.
• Never connect, disconnect or remake a fitting withpressure in the system
• Make sure all fittings are properly installed, referenceInstallation Instructions - page 42, before pressurizingthe system
• Tubing material should be softer than fitting material
• Tylok recommends using Tylok replacement parts
• Although the fittings will hold to the pressure ratingof the tubing, it is not recommended to go beyondthis rating. Elongation could occur in the tubing,shrinking the wall thickness and causing potentialharm to anyone in the area
• Always use proper thread lubricants and sealantson tapered pipe threads
• If process fluids are toxic and/or hazardous, exerciseextra caution
• Never bleed a system by loosening a fitting
• For proper sealing it is recommended that thetubing and fitting be of like material
All components are manufactured and inspected tomeet strict quality control standards in each phase ofproduction. All employees are thoroughly trained tofollow rigid procedures, in accordance with the ISO9001:2000 Quality Standard, to ensure a qualityproduct from the start of each job through completion.At Tylok our primary concern is quality, reliability andservice to our customers.
Gap Gages
Safety Guidelines
Quality Control
Extra care must be taken when tubing is used in gasservice applications. Small gas molecules easilyescape through minute leak paths, therefore, the tubingmust be free of nicks, scratches and imperfections ofany kind. In particular, when using large diameter tubingthe possibility of surface defects is increased due togreater surface area. It is strongly recommended thatthe heavier wall thicknesses be selected. Penetrationof the ferrule on thin wall tubing or soft material maynot offer enough radial resistance for sealing. In suchcases, Tylok recommends using a Plane Insert (Partdescriptor SPI, page 38). In the tables on page 43note the suggested allowable working pressure forgas service.
CS-Lok® Tube Fittings with weld ends offer thesame positive sealing as all other Tylok fittings.Welding could deform the assembly, making pull upsor disassembly difficult. Some precautions should betaken...
• Remove the nut and ferrule from the fitting
• It is important that the fitting threads and sealingsurfaces be protected from weld splatter
• A heat sink should be used to dissipate heat
• Ensure alignment by tack welding symmetrically
• Once welded, remove the weld splatter protectionand reassemble nut and ferrule on fitting
Tylok offers a leak detector, Tyspy, for use in all sealingapplications. Tyspy meets standard MIL-L-25567D,Sect. 4.4.9 for use on oxygen systems.Availiable in 1 pt. spray bottles. Specify number ofbottles needed when ordering. Part Number: TYSPY
• All temperature formula: -55°F to 200°F
• Ultra-sensitive
• Long-lasting bubbles
• Available in spray bottle
• Fluorescent for improved visibility
• Safe for oxygen systems
• Non-corrosive, non-toxic
Part Number Tube Size Part Number Tube Size#1-SGG 1/16” #8-SGG 1/2"#2-SGG 1/8” #10-SGG 5/8”#3-SGG 3/16” #12-SGG 3/4”#4-SGG 1/4” #14-SGG 7/8”#5-SGG 5/16” #16-SGG 1”#6-SGG 3/8”
Gas Service
Precautions forWeld Ends
Tyspy Leak Detector
Values in reverse text are not recommended for Gas Service.
TYLOKTYLOKTYLOK
45For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Tylok Pipe Fittings are manufactured from materials meeting applicable ASTM or ASME specifications, with pipethreads which meet or exceed ANSI B1.20.1 requirements. Strict quality control procedures are followed through-out production. All parts are individually inspected to provide the finest possible product.
Materials: Brass ■ 316 Stainless Steel ■ Steel
Suggested Maximum Operating Pressures for Male Pipe Threads
Suggested Maximum Operating Pressures for Female Pipe Threads
These charts are to be used as a guide only and are based on normal wall thicknesses, used for the various sizes. These ratings may vary widely from effectssuch as the proper use of sealants, size of stock, temperature, corrosion factors, etc. Therefore, Tylok International, Inc., assumes no responsibility for its accuracyin any individual design.
Pipe Thread Specifications
Temperature Ratings
MNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16" 10,100 5,700 10,5001/8" 9,200 5,300 9,8001/4" 7,500 4,100 8,0003/8" 7,250 4,000 7,7001/2" 6,900 3,900 7,3003/4" 6,600 3,700 7,0001" 5,000 2,700 5,000
FNPT 316 Stainless Steel Brass SteelSize PSI Rating PSI Rating PSI Rating1/16" 6,200 3,500 6,8001/8" 6,000 3,400 6,6001/4" 6,100 3,300 6,5003/8" 5,000 2,700 5,4001/2" 4,700 2,500 4,8003/4" 4,300 2,400 4,6001" 4,100 2,300 4,500
Tylok Instrumentation Fittings are rated at the following temperatures:
316 Stainless -325°F to 1200°F Brass -40°F to 400°F Steel -65°F to 400°F(-198°C to 648°C) (-40°C to 204°C) (-54°C to 204°C)
Note: Consideration should be given to maximum temperature ratings if fittings and/or tubing are coated or plated.
The following table lists derating factors that must be considered in applications above that of ambienttemperatures.
ExampleType 316 Stainless Steel 1/4" O.D. x .049" wall at800°F is…
7,500 PSI x .80 = 6,000 PSI
Therefore, the suggested allowable working pressurefor 316 Stainless Steel - 1/4" O.D. with .049" tubewall - at 800°F is 6,000 PSI.
These charts are to be used as a guide only and are based on normal wallthicknesses, used for the various sizes. These ratings may vary widely fromeffects such as the proper use of sealants, size of stock, temperature, cor-rosion factors, etc. Therefore, Tylok International, Inc., assumes no respon-sibility for its accuracy in any individual design.
Tube Pressure Derating Factors at Elevated Temperatures
Temperatures Multiplier Factors304 316 Carbon
°F °C SS SS Copper Steel200 93 1.00 1.00 .80 .95400 204 .94 .97 .50 .86600 315 .82 .85 .77800 427 .76 .80 .59
1000 538 .69 .771200 649 .30 .37
TYLOKTYLOKTYLOK
46 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
CS-Lok® Tube Fittings are completely heat code traceable back to the original mill heat from which it was made.Starting with the original billet, the mill creates a certificate which completely describes the chemical and physicalmakeup. For any one of the three components (body, ferrule, nut) the material certifications can be provided whencalling Tylok and giving the heat code stamp marked on the part itself, along with the part number.
Heat Traceability
RawMaterial Specifications
The CS-Lok® product line offers a Pre-Setting Toolwhen fittings need to be installed in hard to reachplaces. The Pre-Setting Tool is designed to be used inany tabletop vice. After tightening the nut the specifiednumber of turns, as stated in Installation Instructions -page 42, loosen the nut from the Pre-Setting Tool.Once the ferrule has swaged into the tubing surface,the assembly is ready for installation (reference ToRemove and Re-Connect Tube Fitting, page 42).
When ordering the CS-Lok® Pre-Set Tool,reference the part number in the chart. The Pre-SetTool is made from carbon steel and is hardened formaximum durability. The Pre-Set Tool can be usedrepeatedly to set the ferrule onto the tubing for easyinstallation.
Tylok Pre-Setting Tool
Place Pre-Setting Tool in a vice and tighten nutspecified number of turns.
Back nut off of Pre-Setting Tool. Notice the ferrulehas swaged into the tubing. Now take tubing toinstallation area.
Part Number Tube Size#1-SPST 1/16”#2-SPST 1/8”#3-SPST 3/16”#4-SPST 1/4”#5-SPST 5/16”#6-SPST 3/8”#8-SPST 1/2”
#10-SPST 5/8”#12-SPST 3/4”#14-SPST 7/8”#16-SPST 1”
Fitting Bar *Tubing Maximum SpecificationMaterial Stock Forging Specification Hardness (Tubing)
ASTM-B16 Alloy 360 ASTM-B75 60 Max.Brass ASTM-B453 Alloy 345 ASTM-B124 Alloy 377 Copper Rockwell 15T
(Temper O)
StainlessASTM-A276
ASME-SA-182 ASTM-A213Steel
ASME-SA-479Type 316-SS ASTM-A269
90 RbType 316-SS
Steel ASTM-A108 ASTM-A179 72 Rb
*Reference Tubing Selection & Preparation, page 43.
TYLOKTYLOKTYLOK
47For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
For pre-cutting tubing to length, the following chart shows the additional length inside the fitting assembly.
Tube Insertion Chart
Tube Size T Tube O.D. B Dimension#1 1/16 .34#2 1/8 .50#3 3/16 .54#4 1/4 .60#5 5/16 .64#6 3/8 .67#8 1/2 .90#10 5/8 .96#12 3/4 .96#14 7/8 1.03#16 1.0 1.24
*NOTE: All Dimensions Subject to Change.
Tubing–General Applications
CS-Lok® Tube Fittings are designed to perform in a variety of applications that demand high performance.The CS-Lok® product line has been engineered to provide optimal performance, however tubing should alwaysbe considered as an important factor in the design stages of any system. Below is a table that describes somegeneral uses for different types of materials. The table is provided as a reference to the Engineer in the designprocess.
Tylok suggests the use of seamless, fully annealed tubing. Welded tubing may be used with Tylok fittings. However,due to the manufacturing of welded tubing, variables may be encountered. The media flowing through the tubingmust be compatible with the tubing itself. It is always a good rule to use like tubing material on like fitting material.If this format is not followed, the ferrules may have difficulty penetrating the tubing causing an adverse affect on thesealing ability. In addition, dissimilar materials in contact may be sensitive to galvanic corrosion. Tylok recommendsordering tubing material to meet ASTM specifications to ensure that it will be dimensionally, physically and chemicallywithin precise limits (see Raw Material Specifications chart - page 46).
Tube Insertion DepthFinger Tight
Tubing RecommendedMaterial General Applications Temperature Range
Carbon Steel Air Lines, High Pressure, High Temperature, -20°F to 400°F*Oil, Air, Specialty Chemicals, Hydraulic Gases
Copper Low Temperature, Low Pressure Water, Oil, -40°F to 400°FAir, Pneumatic Controls, Lube Lines
Stainless Steel High Pressure, High Temperature, Nitrogen, -20°F to 1000°FHelium, Flammable Gases, Hydraulic, Gases,generally corrosive media
*Based on 400°F maximum.
TYLOKTYLOKTYLOK
NOTESNOTES
48 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
NoticeIn designing a system incorporating tube fittings and valves, it is the designer’s or user’s obligation and responsibility to determine the appropriate fittings and valves to be used foreach application, and to insure proper installation and maintenance.
Limited WarrantyTylok fittings and valves are warranted solely against defects in material and workmanship in the performance of the specific functions for which they are designed, as set forth in thepublished specifications for a period of 12 months. Should any fitting and valve or its component fail due to a defect in material or workmanship, Tylok will replace said fitting andvalve without charge upon return of the failed part and evidence of its failure being due tomaterials or workmanship.
The Warranty above set forth is the only warranty applicable to Tylok products, and is in lieu ofany and all other warranties either express or implied, including any warranty of merchantabilityor fitness. Tylok’s sole responsibility or liability as a result of any loss or damage due to failureshall be to replace the failed part or fitting and valve, and it shall bear no liability for any incidental or consequential damages to person or property.
©2008 Tylok International, Inc.All rights reserved.Litho in U.S.A.
For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
TYLOKTYLOKTYLOK
OOuurr HHiissttoorryyIn the mid 1940s, Cullen Crawford founded the
Crawford Fitting Company. Mr. Crawford developed and
patented the original flareless fitting (nut and two ferrule
system), for the Crawford Fitting Company. Thus, a new and
innovative industry was born making it far easier to make
tubing connections. This reduces installation time and errors.
Since his invention, End Users from all four corners of the globe
have made billions of connections. This system provides leak
proof seals and thus Mr. Crawford has been named “The
founder of the flareless fitting.”
OOuurr MMiissssiioonnIt is our mission, at Tylok International, Inc., to continuously
strive for and achieve total customer satisfaction with both
our products and services.
OOuurr GGooaallTylok’s aggressive goal is to establish ourselves as
an industry leader and expand our market share.
This is maintained in every department within
the organization. Our “total effort” will
guard against losing the personal touch
that makes our business enjoyable
and prosperous for all involved.
INSTRUMENTATION
TUBE FITTINGS
Tylok Standard
CBC-Lok®
CS-Lok®
PIPE FITTINGS
WELD FITTINGS
BALL VALVES
• Ty-Flo® HP Series
• Ty-Flo® 3 Piece
NEEDLE VALVES
MANIFOLDS
FLEXIBLE METAL HOSE
1061 East 260th Street • Euclid, Ohio 44132Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) 261-7317
www.tylok.comCS-Lok Tube Fittings Catalog Doc. 72318 Rev. D
1061 East 260th Street • Euclid, Ohio 44132Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) [email protected] • www.tylok.com
Doc. 72321 Rev. C
TY-FLO HP Series Ball Valves
Lock-Out Device
A lock-out device allows the user to lock the valve in either the fully opened or fully closed position.
Lock-Out devices are available factory installed only.
Add the suffix -LD to the ordering number.Example: SS-6-DTT-6-6-K-LD
How to orderHow to Order TY-FLO HP Series Ball ValvesHow to Order TY-FLO HP Series Ball Valves
SS - 8 - D FT - 8 - 6 - K
TY-Flo HP Series Ball Valves are ordered as listed in this catalog by inserting the material code before the part number. TY-Flo HP Series Ball Valves can be identified through the part number as to material, valve series, style, valve configurations, port size, and seat material. The part number describes a complete ball valve assembly. Special configurations available upon request.
Example: A 5000 PSI Stainless Steel ball valve, 0.375" orifice, with a 1/2" female NPT end connection for port A and a 3/8" CBC-Lok end connection for port B and PCTFE seats, is designated as follows.
Material Valve Series Style Port A / Port B Port A / Port B Size Seat Chart 1 Chart 2 Chart 3 Chart 4 Chart 5 Chart 6
Chart 1 - Material SS Stainless Steel B Brass
Chart 2 - Valve Series 4 0.188” Orifice 6 0.250” Orifice 8 0.375” Orifice
Chart 3 - Style D CBC-Lok S CS-Lok 1 Tylok Standard
Chart 4 - Valve Configuration Type Port A Port B TT Tube Tube MM* Male NPT Male NPT FF* Female NPT Female NPT MF* Male NPT Female NPT FM* Female NPT Male NPT TM Tube Male NPT MT Male NPT Tube TF Tube Female NPT FT Female NPT Tube
*Use Style 1 from chart 3 for this type of configuration.
Chart 5 - Port Size Designator Tube OD (Inches) Pipe Thread (NPT) 2 1/8" 1/8-27 4 1/4" 1/4-18 6 3/8" 3/8-18 8 1/2" 1/2-14 12 3/4" 3/4-14See dimension chart for available sizes.
Chart 6 - Seat T PTFE (Teflon) K PCTFE
OptionsHandles
Assembled standard with Black handle. For other colors add the designator as a suffix to the ordering number.
Example: SS-6-DTT-6-6-K-BL Handle Color Designator RED -RD BLUE -BL GREEN -GR ORANGE -OG YELLOW -YW
Example: B-4-DTT-4-4-TDesignates a 1500 PSI Brass ball valve, 0.188" orifice, with 1/4" CBC-Lok end connections and teflon seats.Example: SS-6-1FF-6-4-KDesignates a 5000 PSI Stainless Steel ball valve, 0.250" orifice, with a 3/8" female NPT end connection for port A and a 1/4" female NPT end connection for port B and KEL-F seats.
•Reliable, simple operation for on-off service
•Fast acting, one quarter turn fully opens or closes the valve
•Maximum performance, straight through flow for minimum turbulence and pressure drop
•Positive leak tight shut off, even with fluctuating pressures
•Panel mounting capabilities standard
•Bi-Directional Flow
•Handle direction indicates position of valve and flow direction
•Micro finished ball provides positive seal
•Free floating ball design compensates for seat wear
•Available in CBC-Lok®, CS-Lok®, or Tylok Standard tube fittings and NPT pipe end connections
•Available in 316 Stainless Steel and Brass construction
Design/Features
tylokTY-FLO HP Series Ball ValvesTY-FLO HP Series Ball Valves
Stainless Steel Brass PTFE PCTFE PTFE PCTFESPECIFICATIONS
*For tubing and pipe fitting working pressures see CBC-Lok, CS-Lok or Tylok Standard catalogs.
3For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com2 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Materials of Construction
tylokTY-FLO HP Series Ball ValvesTY-FLO HP Series Ball Valves
Valve Dimension Table
Dimensions shown with CBC-Lok® and CS-Lok® nuts finger-tight. Dimensions shown are for reference only, subject to change.
* Reduced Port
S
erie
s 8
Ser
ies
6 S
erie
s 4
4-DTT-2-2* 1/8" CBC-Lok 4-STT-2-2* 1/8" CS-Lok 4-DTT-4-4 1/4" CBC-Lok 4-STT-4-4 1/4" CS-Lok 4-1FF-2-2 1/8" Female NPT
0.188 (4.8)
4-1FF-4-4 1/4" Female NPT 4-1MM-2-2 1/8" Male NPT 4-1MM-4-4 1/4" Male NPT 6-DTT-4-4* 1/4" CBC-Lok 6-STT-4-4* 1/4" CS-Lok 6-DTT-6-6 3/8" CBC-Lok 6-STT-6-6 3/8" CS-Lok 6-DTT-8-8 1/2" CBC-Lok 6-STT-8-8 1/2" CS-Lok 6-1FF-4-4 1/4" Female NPT
0.250 (6.4)
6-1FF-6-6 3/8" Female NPT 6-1FF-8-8 1/2" Female NPT 6-1MM-4-4 1/4" Male NPT 6-1MM-6-6 3/8" Male NPT 6-1MM-8-8 1/2" Male NPT 8-DTT-6-6* 3/8" CBC-Lok 8-STT-6-6* 3/8" CS-Lok 8-DTT-8-8 1/2" CBC-Lok 8-STT-8-8 1/2" CS-Lok 8-DTT-12-12 3/4" CBC-Lok 8-STT-12-12 3/4" CS-Lok 0.375 (9.5)8-1FF-6-6 3/8" Female NPT 8-1FF-8-8 1/2" Female NPT 8-1FF-12-12 3/4" Female NPT 8-1MM-6-6 3/8" Male NPT 8-1MM-8-8 1/2" Male NPT
1.54 1.54
1.63 1.63
1.21 1.21 1.46 1.46 1.30 1.30 1.49 1.49
1.65 1.65
1.71 1.71
1.83 1.83
1.51 1.51
1.70 1.70
1.51 1.51
1.70 1.70
1.85 1.85
1.96 1.96
1.97 1.97
1.61 1.61 1.78 1.78 1.90 1.90 1.65 1.65 1.84 1.84
0.59 0.47 0.38 1.50 1.37 0.75
0.58 0.25
0.56 1.69 1.37 0.75 0.50 0.25
0.61 0.13
0.58 0.25
0.65
0.81 0.66 2.00 1.56 0.88
0.72
0.65
BASIC PArT CONNECTION OrIFICE DImENSIONS (INCHES) NumBEr POrT A POrT B INCH (mm) A B C D E F G PANEL HOLE
# Component Stainless Brass Steel 1 Handle Polypropylene
2 Screw Stainless Steel
3 Gland Nut 316 SS Brass
4 Stem Washer Nylat
5 Stem 316 Stainless Steel
6 Stem Back-Up Ring PTFE
7 Stem O-Ring Viton
8 Panel Lock Nut 316 SS Brass
9 Body CF8M/A351 Brass
10 Ball 316 Stainless Steel
11 Seat PTFE, PCTFE
12 End Connector O-Ring Viton
13 End Connector 316 SS Brass
Part Number Shown:SS-6-DTT-6-6-K
Pressure Rating* 1500 psig 5000 psig 1500 psig 3000 psig (103 bar) (344 bar) (103 bar) (206 bar)
Temperature Rating 0 to 400º F -300 to 300º F 0 to 400º F -300 to 300º F (-18 to 204º C) (-148 to 149º C) (-18 to 204º C) (-148 to 149º C)
POrTA
POrTB
CBC-Lok® double ferrule tube ends are completely interchangeable with Swagelok® and Parker A-Lok® tube ends.
CS-Lok® single ferrule tube ends are completely interchangeable with Parker CPI® tube ends.
•Reliable, simple operation for on-off service
•Fast acting, one quarter turn fully opens or closes the valve
•Maximum performance, straight through flow for minimum turbulence and pressure drop
•Positive leak tight shut off, even with fluctuating pressures
•Panel mounting capabilities standard
•Bi-Directional Flow
•Handle direction indicates position of valve and flow direction
•Micro finished ball provides positive seal
•Free floating ball design compensates for seat wear
•Available in CBC-Lok®, CS-Lok®, or Tylok Standard tube fittings and NPT pipe end connections
•Available in 316 Stainless Steel and Brass construction
Design/Features
tylokTY-FLO HP Series Ball ValvesTY-FLO HP Series Ball Valves
Stainless Steel Brass PTFE PCTFE PTFE PCTFESPECIFICATIONS
*For tubing and pipe fitting working pressures see CBC-Lok, CS-Lok or Tylok Standard catalogs.
3For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com2 For Orders and Information 1-800-321-0466 • Visit Us Online at www.tylok.com
Materials of Construction
tylokTY-FLO HP Series Ball ValvesTY-FLO HP Series Ball Valves
Valve Dimension Table
Dimensions shown with CBC-Lok® and CS-Lok® nuts finger-tight. Dimensions shown are for reference only, subject to change.
* Reduced Port
S
erie
s 8
Ser
ies
6 S
erie
s 4
4-DTT-2-2* 1/8" CBC-Lok 4-STT-2-2* 1/8" CS-Lok 4-DTT-4-4 1/4" CBC-Lok 4-STT-4-4 1/4" CS-Lok 4-1FF-2-2 1/8" Female NPT
0.188 (4.8)
4-1FF-4-4 1/4" Female NPT 4-1MM-2-2 1/8" Male NPT 4-1MM-4-4 1/4" Male NPT 6-DTT-4-4* 1/4" CBC-Lok 6-STT-4-4* 1/4" CS-Lok 6-DTT-6-6 3/8" CBC-Lok 6-STT-6-6 3/8" CS-Lok 6-DTT-8-8 1/2" CBC-Lok 6-STT-8-8 1/2" CS-Lok 6-1FF-4-4 1/4" Female NPT
0.250 (6.4)
6-1FF-6-6 3/8" Female NPT 6-1FF-8-8 1/2" Female NPT 6-1MM-4-4 1/4" Male NPT 6-1MM-6-6 3/8" Male NPT 6-1MM-8-8 1/2" Male NPT 8-DTT-6-6* 3/8" CBC-Lok 8-STT-6-6* 3/8" CS-Lok 8-DTT-8-8 1/2" CBC-Lok 8-STT-8-8 1/2" CS-Lok 8-DTT-12-12 3/4" CBC-Lok 8-STT-12-12 3/4" CS-Lok 0.375 (9.5)8-1FF-6-6 3/8" Female NPT 8-1FF-8-8 1/2" Female NPT 8-1FF-12-12 3/4" Female NPT 8-1MM-6-6 3/8" Male NPT 8-1MM-8-8 1/2" Male NPT
1.54 1.54
1.63 1.63
1.21 1.21 1.46 1.46 1.30 1.30 1.49 1.49
1.65 1.65
1.71 1.71
1.83 1.83
1.51 1.51
1.70 1.70
1.51 1.51
1.70 1.70
1.85 1.85
1.96 1.96
1.97 1.97
1.61 1.61 1.78 1.78 1.90 1.90 1.65 1.65 1.84 1.84
0.59 0.47 0.38 1.50 1.37 0.75
0.58 0.25
0.56 1.69 1.37 0.75 0.50 0.25
0.61 0.13
0.58 0.25
0.65
0.81 0.66 2.00 1.56 0.88
0.72
0.65
BASIC PArT CONNECTION OrIFICE DImENSIONS (INCHES) NumBEr POrT A POrT B INCH (mm) A B C D E F G PANEL HOLE
# Component Stainless Brass Steel 1 Handle Polypropylene
2 Screw Stainless Steel
3 Gland Nut 316 SS Brass
4 Stem Washer Nylat
5 Stem 316 Stainless Steel
6 Stem Back-Up Ring PTFE
7 Stem O-Ring Viton
8 Panel Lock Nut 316 SS Brass
9 Body CF8M/A351 Brass
10 Ball 316 Stainless Steel
11 Seat PTFE, PCTFE
12 End Connector O-Ring Viton
13 End Connector 316 SS Brass
Part Number Shown:SS-6-DTT-6-6-K
Pressure Rating* 1500 psig 5000 psig 1500 psig 3000 psig (103 bar) (344 bar) (103 bar) (206 bar)
Temperature Rating 0 to 400º F -300 to 300º F 0 to 400º F -300 to 300º F (-18 to 204º C) (-148 to 149º C) (-18 to 204º C) (-148 to 149º C)
POrTA
POrTB
CBC-Lok® double ferrule tube ends are completely interchangeable with Swagelok® and Parker A-Lok® tube ends.
CS-Lok® single ferrule tube ends are completely interchangeable with Parker CPI® tube ends.
1061 East 260th Street • Euclid, Ohio 44132Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) [email protected] • www.tylok.com
Doc. 72321 Rev. C
TY-FLO HP Series Ball Valves
Lock-Out Device
A lock-out device allows the user to lock the valve in either the fully opened or fully closed position.
Lock-Out devices are available factory installed only.
Add the suffix -LD to the ordering number.Example: SS-6-DTT-6-6-K-LD
How to orderHow to Order TY-FLO HP Series Ball ValvesHow to Order TY-FLO HP Series Ball Valves
SS - 8 - D FT - 8 - 6 - K
TY-Flo HP Series Ball Valves are ordered as listed in this catalog by inserting the material code before the part number. TY-Flo HP Series Ball Valves can be identified through the part number as to material, valve series, style, valve configurations, port size, and seat material. The part number describes a complete ball valve assembly. Special configurations available upon request.
Example: A 5000 PSI Stainless Steel ball valve, 0.375" orifice, with a 1/2" female NPT end connection for port A and a 3/8" CBC-Lok end connection for port B and PCTFE seats, is designated as follows.
Material Valve Series Style Port A / Port B Port A / Port B Size Seat Chart 1 Chart 2 Chart 3 Chart 4 Chart 5 Chart 6
Chart 1 - Material SS Stainless Steel B Brass
Chart 2 - Valve Series 4 0.188” Orifice 6 0.250” Orifice 8 0.375” Orifice
Chart 3 - Style D CBC-Lok S CS-Lok 1 Tylok Standard
Chart 4 - Valve Configuration Type Port A Port B TT Tube Tube MM* Male NPT Male NPT FF* Female NPT Female NPT MF* Male NPT Female NPT FM* Female NPT Male NPT TM Tube Male NPT MT Male NPT Tube TF Tube Female NPT FT Female NPT Tube
*Use Style 1 from chart 3 for this type of configuration.
Chart 5 - Port Size Designator Tube OD (Inches) Pipe Thread (NPT) 2 1/8" 1/8-27 4 1/4" 1/4-18 6 3/8" 3/8-18 8 1/2" 1/2-14 12 3/4" 3/4-14See dimension chart for available sizes.
Chart 6 - Seat T PTFE (Teflon) K PCTFE
OptionsHandles
Assembled standard with Black handle. For other colors add the designator as a suffix to the ordering number.
Example: SS-6-DTT-6-6-K-BL Handle Color Designator RED -RD BLUE -BL GREEN -GR ORANGE -OG YELLOW -YW
Example: B-4-DTT-4-4-TDesignates a 1500 PSI Brass ball valve, 0.188" orifice, with 1/4" CBC-Lok end connections and teflon seats.Example: SS-6-1FF-6-4-KDesignates a 5000 PSI Stainless Steel ball valve, 0.250" orifice, with a 3/8" female NPT end connection for port A and a 1/4" female NPT end connection for port B and KEL-F seats.
Instrumentation Tubing
Instrumentation TubingFractional Sizes
For the best in stainless steel instrumentation tubing, turn to Tylok. We offer the quality, reliability and value you trust, for over fifty years.
Tylok offers all types of stainless steel instrumentation tubing, ensuring accurate, straight and distortion free cut length to the tolerances you require.
Tylok’s stainless steel tubing is the perfect compliment to our CBC-Lok® & CS-Lok® tube fitting offering.
Fitting LinesCBC-Lok® double ferrule fittings are completely interchangeable with tube fittings of Swagelok® and Parker A-Lok®.
CS-Lok® single ferrule tube fittings are completely interchangeable with tube fittings of Parker CPI®.
REGISTRATIONS& TYPE APPROVALS
Canadian Registration
CUSTOMER CAREAt Tylok, we strive for total satisfaction of our Customers. Your inquires will be responded to within 24 hours. Our team features a knowledgeable staff to answer your questions quickly. We have the ability to make special items for you at a reasonable price, with fast delivery. Fast delivery is key to your success. Realizing this, delivery is constantly being measured via our ISO 9001:9002 Quality Management System. Our goal is to ship all products from stock to keep you running.
At Tylok, your Total Satisfaction is our business.
HOW TO ORDERHow To Order
*Cold Drawn Seamless Tube, A&P Polished, ASTM A269/A213
Doc. 72326 Rev. B
1061 East 260th Street • Euclid, Ohio 44132Tel: (216) 261-7310 • 1-800-321-0466 • Fax: (216) [email protected] • www.tylok.com
Part No. Outside Wall Type Nominal Material Diameter Thickness Length Standard (inches) (inches) (feet)
4-T-035-S-304/L-A269 Seamless 4-T-035-W-304/L-A269
.035 Welded
4-T-035-S-316/L-A269 Seamless 4-T-035-W-316/L-A269 Welded
4-T-049-S-304/L-A269 Seamless 4-T-049-W-304/L-A269 1/4
0.049 Welded
4-T-049-S-316/L-A269 Seamless 4-T-049-W-316/L-A269 Welded
4-T-065-S-304/L-A269 Seamless 4-T-065-W-304/L-A269
0.065 Welded
4-T-065-S-316/L-A269 Seamless 4-T-065-W-316/L-A269 Welded
6-T-035-S-304/L-A269 Seamless 6-T-035-W-304/L-A269
0.035 Welded
6-T-035-S-316/L-A269 Seamless 6-T-035-W-316/L-A269 Welded
6-T-049-S-304/L-A269 Seamless 20 A269* 6-T-049-W-304/L-A269 3/8
0.049 Welded
6-T-049-S-316/L-A269 Seamless 6-T-049-W-316/L-A269 Welded 6-T-065-S-304/L-A269 Seamless 6-T-065-W-304/L-A269
0.065 Welded
6-T-065-S-316/L-A269 Seamless 6-T-065-W-316/L-A269 Welded
8-T-035-S-304/L-A269 Seamless 8-T-035-W-304/L-A269
0.035 Welded
8-T-035-S-316/L-A269 Seamless 8-T-035-W-316/L-A269 Welded
8-T-049-S-304/L-A269 Seamless 8-T-049-W-304/L-A269 1/2
0.049 Welded
8-T-049-S-316/L-A269 Seamless 8-T-049-W-316/L-A269 Welded
8-T-065-S-304/L-A269 Seamless 8-T-065-W-304/L-A269
0.065 Welded
8-T-065-S-316/L-A269 Seamless 8-T-065-W-316/L-A269 Welded