2
U2 / U2 Pro Mini XMOS USB to Coaxial /Optical Converter Thank you very much for choosing our products, please read this manual carefully before using. How to use Introduction Warm tip: 1.3.8 version FOOBAR player is recommended, the player settings of differnt version players will be a little different. 1. Install the ASIOProxyInstall-0.7.1.2.exe program in the foobar components file, and follow the prompts to complete. 2. Install the sacd plug-in and ASIO plug-in, as shown below: (The plug-in is in the foobar components file ) 3. Click “Output” on the left side and then select “ASIO:foo_dsd_asio” on the right side as the following picture shows: 4. Click “Output” --- “ASIO” on the left side, and then double click “foo_dsd_asio” just as the following picture shows： After double click “foo_dsd_asio”, the following menu will appear and please set as it indicates，(Note: must set as the following picture if want coaxial and optical to output DSD.) How to play DSD music This is a USB to Toslink optical / coaxial / 12S(U2 PRO) audio converter, a pure digital sound card, support common losselss playback, suitable for PC computer, notebook, mobile phone, set-top box, rock 64, raspberry pi and so on, it can provide better sound quality than their own sound card. 3. After installing the driver, the computer will prompt and display the device "XMOS XS1-U8 DJ" in the device manager. ② ④ ③ ① 1. Connect U2/U2 PRO to the USB port of the computer with a USB cable, and the computer USB port can be used for power supply, for U2 pro version you also can use external DC 5V power interface. 2. After connecting to the computer, the computer will prompt that the USB device has been found, and then please install the driver of this device: XMOS-Stereo-USB-Audio-Class2-Driver- 3004_v4.13.0.exe, please choose different versions of drivers according to the computer system.
