UC-SERIES TIMKEN BALL BEARING HOUSED UNITS - UC-Series Ball Bearing... · Ball Bearing Housed Units...

TIMKEN® BALL BEARING HOUSED UNITS

UC-SERIES

2014 Launch Document For Internal Use Only

32 Document for internal use only Document for internal use only

EXECUTIVE SUMMARY .......................................................................3

MARKET OVERVIEW ...........................................................................4A. Target Market ..................................................................................4B. Target Industries And Applications ............................................5C. Timken’s Current Position In The Ball Bearing Housed Unit Market ......................................................................................5

PRODUCT OVERVIEW ........................................................................5A. Description Of Product ..................................................................5B. Timken Product Range ..................................................................6C. Product Features ............................................................................7D. A Look Inside ...................................................................................7E. Seal And Flinger ..............................................................................8F. Nomenclature .................................................................................9G. Competitive Assessments And Comparisons .........................11H. Branding .........................................................................................12I. Packaging ......................................................................................13

PRODUCT POSITIONING, GROWTH OBJECTIVES AND STRATEGY .........................................................14A. Objective ........................................................................................14B. Central Messages And Customer Benefits .............................14C. Value Proposition .........................................................................15D. Positioning In The Market ..........................................................16

COMMERCIAL ACTIVITIES ..............................................................16A. Availability And Inventory ...........................................................19B. Sales Plan ......................................................................................19C. Pricing Strategy ............................................................................20D. Interchanges .................................................................................20E. Technical Data ..............................................................................21F. E-Commerce Interface ................................................................23G. Supply Chain ..................................................................................23

ENTERING THE MARKET ..................................................................24A. Main Messages ............................................................................24B. Marketing Communication Tactics ...........................................24C. Launch Timing ...............................................................................25

FAQS .....................................................................................................26

APPENDIX ...........................................................................................28Ball Bearing Housed Units Interchange – European ..................28Ball Bearing Housed Units Interchange – Japanese .................34

EXECUTIVE SUMMARYPRODUCT OVERVIEW

• TimkenisintroducingtheUC-seriesBallBearingHousedUnitproductlinetogrowend-usersaleswithan initialfocusinregionsoutsideoftheUnitedStates.Theobjectiveistoserveawiderrangeofenduserneeds andofferdistributorsanadditionalproductlinefromTimken.

• ThenewUC-seriesBallBearingHousedUnitisacombinationofaradialballbearing,sealsandcastiron housing.Fivecommonhousingdesignsareoffered:pillowblock,4-boltflange,2-boltflange,pilotedround flangeandtake-upstyles.Theproductlineiscompletedbytheofferingofreplacementinserts.

• Ready-to-mountunitsareinterchangeablewithcompetitivedesignswithoutmodification.

• BallBearingHousedUnitsarecommonlyusedinnearlyanyend-userproductionfacilityworldwide.

• BallBearingHousedUnitsaresuitableforawiderangeofindustrialapplications.Targetmarketsarematerials handling,foodandbeverage,agriculture,packagingmachinery,fansandblowers,paperandprintingmachinery andgeneralindustrialequipment.

PRODUCTPOSITIONING

• Timken’snewUC-seriesBallBearingHousedUnitofferingprovidesanotherlineofreliableTimken-branded productsthatdistributorscanreadilyhaveavailableforourcustomers.

• TheUC-seriesenhancesourhousedunitofferingandpositionsTimkenultimatelyasoneofthesupplierswiththe broadestrangeofhousedunitsintheindustry.TheUC-serieswillsupportthesalesofotherTimkenproducts.

• WewillleverageTimken’s:

• brandreputationforunparalleledreliabilityandquality

• industryleadingtechnicalsupport

• globalmarketcoverage(salesanddistributionnetwork)

• Thereare,ingeneral,twocompetitivestylesofBallBearingHousedUnitsofferedbypremiumproductmarket leaders.Theydifferbycagematerial,locationofthegreasefittingandhousingdesign.

• Timken’snewUC-seriesservesbothmarketspaces.

• TheUC-nomenclatureindicatesthatourproductlinefollowstheAsiandesignstandardforBallBearing HousedUnits.Itisthepredominantdesign.

• TheUC-seriesisfunctionallyinterchangeable(basetocenterheight,boltholespacing)withbothdesignstyles.

VALUEPROPOSITION

TimkenwillprovidehighqualityBallBearingHousedUnitsatpricelevelsthatarecompetitivewithregionalP1shareleaders,supportedbylocalizedinventoryprograms.

CUSTOMERBENEFITS

• Awiderangeofready-to-mountBHUsthatareinterchangeableinthemarket

• Increasedequipmentuptimeandreducedmaintenancecost

• Effectivesealingperformanceresultinginreducedlubricationleakageandlessenvironmentalimpact

TimkeniscontinuingtoexpandthehousedunitproductportfoliobylaunchingthenewUC-seriesBallBearingHousedUnitproductline.

TheintroductionoftheUC-seriesproductlineistargetedforMay2014.Itincludes:

• Standardserieswithsetscrew

• Metricandinchboresizesfrom12-90mm

• Theproductrangewillbelaunchedinwaves,with thesmaller,morepopularsizesof12-60mmborein May2014.Thelargersizesof65-90mmborewill followinQ4/2014

PleasenotethatwearelookingtocontinuetoexpandtheBallBearingHousedUnitofferingaftertheinitiallaunch.Additionalseries,typesandpartswillbedefinedasneededandcommunicatedlater.

TABLEOFCONTENTS:

Picture 1: pillow block ball housed unit - part number is UCP209


MARKET OVERVIEWA. TARGET MARKETThenewBallBearingHousedUnitproductlineisintroducedtogrowend-usersaleswithaninitialfocusinregionsoutsideoftheUnitedStates.TheobjectiveistoserveawiderrangeofenduserneedsandofferdistributorsanadditionalproductlinefromTimken.Wewillreplacecompetitor’sproductinexistingapplicationsaswellasestablishshelf-spaceatdistributors.AlthoughOEMmarketgrowthisexpectedtobeopportunistic,wehavetherightvaluepropositiontotargetsmallconveyorandequipmentmanufacturers.

ThetargetmarketinwhichTimkenwillcompeteisestimatedat$310M.Itrepresentsend-user’sdemandforpremiumBallBearingHousedUnitswithsetscrewlockingdeviceoutsideoftheUnitedStates.

Globally,themarketleadersareSKF,INA,NSK,NTN,andFAG,withmanysmallerregionalmanufacturersgainingshareintheirfocusmarkets.Pricingisverycompetitive,especiallyinregionswithlocalmanufacturers.

BallBearingHousedUnitsaretypicallypurchasedasanassembledunit,althoughcustomerscanalsobuyreplacementbearings(inserts).

B. TARGET INDUSTRIES AND APPLICATIONSBallBearingHousedUnitsarethemostcommonlyusedHousedUnittypearoundtheglobe.Theyaccommodateawidevarietyofindustrialapplicationsandoperatingconditions.Infact,independentlyfromtheproductanend-usermanufactures,almosteveryproductionfacilityutilizesBallBearingHousedUnits.However,therearespecificindustriesthathaveahigherdemandforBallBearingHousedUnits.Typicalequipment/applicationsbenefitingfromBallBearingHousedUnitsinclude:

Picture 2: selected industry applications for Ball Bearing Housed Units

C. TIMKEN’S CURRENT POSITION IN THE BALL BEARING HOUSED UNIT MARKETFafnirinventedtheBallBearingHousedUnitinthefirsthalfofthe20thcentury.TheproductlinehasbeenfocusedonservingtheinstalledbaseinNorthAmerica.Today,sinceTimken’sacquisitionofFafnir,wehaveastrongnichepositioninNorthAmericawiththelockingcollarproduct.However,wehavelimitedshareofthesetscrewmarket.TheintroductionoftheUC-productlinepositionsustogrowourshareofthepopularsetscrewmarketglobally.ItstronglyemphasizesTimken’sambitiontobringafullycompetitiveproductlineintotheglobalmarketandbuildasolidbusinessbasewithinthehighlyfragmentedend-usermarketworldwide.

Weappliedourmarketandapplicationknowledgetoprovideahighquality,competitivelypricedproductline.

PRODUCT OVERVIEW A. DESCRIPTION OF PRODUCTBallBearingHousedUnitscombinethebearing,housing,sealandlockingsystemintoonedeviceforeasyinstallation.Theunitcanbepositionedonastraightshaftwithoutshouldersorotherbackingfeatures.

TimkenoffersacomprehensiverangeofstandardseriesBallBearingHousedUnitsinmetricandimperialsizes.

OurnewUC-seriesBallBearingHousedUnitsusethewell-establishedsetscrewlockingtechnology.Setscrewlockinghousedunitsareequippedwithtwospeciallydesignedsetscrewspositionedata120-degreeangleinaninnerringthatlocksontotheshaft.Theyprovidequickandeasyinstallationandremoval.Thesetscrewlockingmechanismisalsowellsuitedforreversingapplications.

UCseriesunitsaresuppliedwithagreasefittingforquickandconvenientre-lubrication.

Glass making machinery Brick making machinery Paper and printing industry

Materials handling (conveyors) Food processing Beverage machinery

Agriculture machinery Packaging machinery Air handling


B. TIMKEN PRODUCT RANGE

Table 1: product portfolio of the new UC-series Ball Housed Unit product line

C. PRODUCT FEATURES• Compact,one-piecehousingcanbemountedinanyposition.

• TheUC-seriesissuggestedforindustrialapplicationswherenormalloadsareencountered.

• Thewideinnerringprovidesfullwidthontheshaft,isself-aligningduetothesphericalouterdiameterofthe bearingouterringandismoretolerantofmisalignmentthannarrowwidthbearings.

• Setscrewlockingmechanismforfastinstallation.

• Bearingpre-lubricatedwithhigh-qualitylithium-basedgrease,compatiblewithmostindustrialgreases.

• Greasefittingsuppliedforre-lubrication.

• Themulti-piecesealdesigniswell-suitedforapplicationsinvolvingwetordirtyenvironments.

• Bolt-holespacingandbasetocenterheightdimensionsareinterchangeablewithcompetitiveunits.

• TimkenUCP-seriessetscrewpillowblocksfeaturetheTimkenUCbearinginsert.

• Housingdesignedforeaseofbearingreplacement

D. A LOOK INSIDE• Precisionformedflinger:providesthefirstlevelofprotectionagainstcontamination.

• Highperformanceseal:bondednitrilerubbersealwithanengineeredinterfacetotheinnerring.

• Hardenedandgroundsealland:extendsseallifebyprotectingagainstabrasivewear

• Outerringwithsphericaloutsidediameter:precisionfitbetweenbearingandhousingtoimprovebearinglife.

• Lubricationdeliverysystem:precision-machinedlubricationgrooveandholesintheouterringofthebearing.

• Precisionballsandcage:steelcageprovideseffectiveballguidanceandhightemperatureservicecapability.

• Wideinnerring:improvedshaftsupportovernarrowrings,helpimprovebearinglifeandreducemisalignment.

• Setscrewangle:120°angleminimizesinnerringdistortionforsmoother-runningbearingandlongerlife.

Picture 3: cut-away of the UCP212 pillow block Ball Bearing Housed Unit

Housing (pillow block)

Hexagon socket set screw

Lubrication hole

Precision formed flinger

High-performance sealEngineered balls and cage

Wide inner ring

Outer ring with spherical outside diameter

Lubrication groove

Product offering Nomenclature Size range (metric) Size Range (imperial)

UCP pillow block housed unit UCP 12 mm to 90 mm 1/2 in. to 3 1/2 in.

4-Bolt Flange housed unit UCF 12 mm to 90 mm 1/2 in. to 3 1/2 in.

2-Bolt Flange housed unit UCFL 12 mm to 90 mm 1/2 in. to 3 1/2 in.

Piloted round flange unit UCFC 12 mm to 90 mm 1/2 in. to 3 1/2 in.

Take-Up unit UCT 12 mm to 85 mm 1/2 in. to 3 1/4 in.

Bearing insert UC 12 mm to 90 mm 1/2 in. to 3 1/2 in.


E. SEAL AND FLINGERAsophisticatedsealingsystemprotectsthebearingsoftheUC-seriesagainstcontaminationfromtheoutsideandlossoflubricationontheinside.Itischaracterizedbyanefficientcombinationofasealandaflinger:

• Thebondednitrilerubbersealisinstalledtotheouterringofthebearingandperformstwomaintasks:

• Thesealisequippedwithaninwardfacinglipthatenablesgreasetoflowbackintothebearing.Thishelps resultinanimprovedlubricationperformanceandextendedbearinglife.

• Thesealprovidesthesecondlevelofprotectionagainstcontaminationfromtheoutside.

• Theflingerprovidesthefirstlevelofprotectionagainstcontamination,suchasmoistureanddust.Theflingeris installedtotheinnerringofthebearing.

Picture 4: layout drawing for seal and flinger for an UC insert

Picture 5: the two different premium Ball Bearing Housed Unit designs

• Productswithanyloncageandgreasefittinglocationatanangleof45°arecalledthe“Y-series”.Thename derivesfromthefactthatmanymarketparticipantsusetheletter“Y”intheirnomenclature.The“Y-design”is predominantintheUnitedStatesandcommoninEurope.Marketparticipantsofferingthisproducttypeare e.g.SKF,INA,Dodge,SealmasterandFafnir.

• Incontrastthe“UC-design”usesasteelcageandthegreasefittingislocatedontopofthehousing.It representstheAsiandesignstandardforBallBearingHousedUnitsandistodaythepredominantdesign worldwide.ItcontinuestotakemarketsharefromtheestablishedY-seriesmanufacturers.

ThedesignofTimken’snewBallBearingHousedUnitsfollowstheAsianstandardandthereforeiscalledtheUC-series.Timkenhasdecidedtofollowthisspecificindustry-standardtoensurehighcustomerrecognitionfortheproductlinewithintargetindustriesaswellaskeeppartnumberinterchangestoaminimum.

Bykeyproductdimensions,thepartnumbersofTimken’snewUC-seriesaresubstitutableforbothkeystyleswithoutanymodification.

F. NOMENCLATUREThereare,ingeneral,twostylesofBallBearingHousedUnitsofferedbypremiumproductmarketparticipants.

Y-SERIES

MANUFACTURER PART NUMBER

SKF SY 25

INA RASEY 25

Fafnir YAS 25

Dodge P2B-SC-25M

Sealmaster NP 205

UC-SERIES

MANUFACTURER PART NUMBER

Timken UCP205

NSK UCP205

NTN UCP205

FAG UCP205

FYH UCP205

• Y-nomenclature (U.S./Europe)

• Nyloncage

• Flaredhousing

• Greasefittingoffset by45°

• UC-nomenclature(Asia)

• Steelcage

• Roundhousing

• Greasefittingontop ofhousing

Outer Ring

Inner Ring

Flinger

Seal


Table 3: main features of competitive product offering

G. COMPETITIVE ASSESSMENTS AND COMPARISONSThereare,ingeneral,twostylesofBallBearingHousedUnitsofferedinthemarket.PleaseseeTable3forageneralcompetitiveoverview.

TheUC-styleproductiswellknownintheworldandthemarketiswellestablished.TheUCnomenclatureisunderstoodandeasilyinterchangeable.Fromaglobalmarketshareperspective,theUC-styleisthepredominantdesignandtheproductfeaturesarepreferredbymanycustomers.Wewillcovertheproductpositioninginthemarketinchapter4.

Market Participant

Design

Regions Price Positioning Perceived PerformanceLook Cage Material Location Of

Grease Fitting Housing Style

Skf Nylon Offset By 45° Flared All High High

Peer Nylon Offset By 45° Flared North America Low Low

Ina Nylon Offset By 45° Flared All W/O Asia High High

FAG Black Series Steel Top Of Housing Rounded Asia Low-Medium High

Nsk Steel Top Of Housing Rounded All High High

Rhp Nylon Offset By 45° Flared Europe High High

Ntn (Ultra-Class) Nylon Offset By 45° Flared North America High High

Ntn Steel Top Of Housing Rounded All High High

Timken (Uc-Series) Steel Top Of Housing Rounded All W/O U.S. High High

Fafnir Nylon Offset By 45° Flared North America High High

Dodge Nylon Offset By 45° Flared North America High High

Sealmaster Nylon Offset By 45° Flared North America High High

Koyo Steel Top Of Housing Rounded All Medium Medium

Fyh Steel Top Of Housing Rounded All Medium Medium

Asahi Steel Top Of Housing Rounded All Low Medium

Other China Steel Top Of Housing Rounded Asia Low Low

Table 2: nomenclature of the new UC-series Ball Housed Unit product line

Thenomenclatureforthisproductofferingisdescribedinthegraphicbelow:

UC P 2 05

Bearing Insert Code UC - Cylindrical bore, spherical outer diameter, set screw locking mechanism

Bore Diameter Code – Metric 01 Nominal bore diameter = 12 mm02 Nominal bore diameter = 15 mm03 Nominal bore diameter = 17 mm04 or Bore diameter (mm) = bore diameter code x 5higherExample:UCF201 = 12 mm bore (Four-bolt flanged unit)UCP211 = 55 mm bore (Pillow block unit)

Bore Diameter Code – Imperial -8 or Nominal bore diameter = bore diameter code/16higher Example:UCF201-8 = 8/16 in. or 1/2 in. bore (Bearing insert only)UCP205-16 = 16/16 in. or 1 in. bore (Pillow block unit)

Housing Code P – Pillow block unitF – Four-bolt flanged unitFL – Two-bolt flanged unitT – Take-up unitFC – Piloted round flanged unit

Series Code2-Standard industrial series


Picture 7: brand and part number on insert

H. BRANDINGTheUC-seriesfeaturestheTimkenlogoonthebearinginsertandonthehousing.Theinsertpartnumberisstampedontheslinger(seal).Thehousingcodeiscastintothehousing.Bycombiningtheinsertcode(exampleUC205)withthehousingcode(P205),thefullpartnumbercanbeidentified(UCP205).

I. PACKAGINGAllUC-seriesproductswillbepackagedinpolymerbagsinsideofTimkenBlackandOrangeboxesandshippedtoRegionalServiceCentersinTimkenshipcases.Housedunitgreasefittingswillbepackagedseparatelyinpolybagsandwillbeincludedintheboxwiththehousedunit.

Inserts(replacementbearings)willbepackagedinballbearingscartons.

Examplesoftypicalpackagingareshownbelow.

Picture 8: packaging

Picture 9: packaging

Picture 6: brand and part number on housing

Housing:Part Number

HOUSING:TIMKENBRAND

Insert:Part Number on Flinger

INSERT:TIMKENBRANDONFLINGER


PRODUCT POSITIONING, GROWTH OBJECTIVES AND STRATEGYA. OBJECTIVETheobjectivesoftheUC-seriesBallBearingHousedUnitproductlaunchare:

• ServeawiderrangeofenduserneedsandofferdistributorsanadditionalproductlinefromTimken

• BallBearingHousedUnitstobesoldglobally(withtheexceptionoftheUnitedStates)atregionally-competitive pricesviaasourcedproductstrategy

• Competeinbothpremiumproductspaces:Y-marketandUC-market

• EnableincreasedproductbreadthtosupportotherTimkenproducts

• AlignwithTimken’shousedunitproductlineexpansiononaglobalbasis

B. CENTRAL MESSAGES AND CUSTOMER BENEFITSTimkenBallBearingHousedUnitsdeliveroptimalperformanceandreliabilityinmanyapplications.Manufacturedtoourprecisequalitystandards,TimkenBallHousedUnitsarehighlyengineeredforradial,thrustandcombinationloads.TimkenBallBearingHousedUnitsimproveefficienciesthrough:

1. A wide range of ready-to-mount BHUs that are interchangeable with many models in the market

• Fivedifferenthousingdesignsplusreplacementinsertsareofferedinmetricandimperialsizes

• TimkenBHUsinterchangewithmanydifferentmodelsandcanbeboltedtomachinerywithout anymodification

• Localin-stockavailabilityassurestheservicelevelscustomersexpectforreduceddowntimeandinventory carryingcosts

• Setscrewlockingdesignallowsforeasyinstallation

• Meetawiderangeofapplicationneeds

2. Help Increase equipment uptime and reduce maintenance cost

• Bearingswithsphericalouterringsfittinginhousingswithaconcavebore,compensatingforstatic misalignmentoftheshaftof+/−3degrees.

• Highqualitysteelcagesoperateinenvironmentsupto100°C

• Housingstrengthissuitableformostindustrialapplications

• Timkenknowledgeandsupportcomestandard

3. Robust sealing performance resulting in reduced lubrication leakage and less environmental impact

• Precisionsealinghelpsprovideextendedbearinglifeandreducedlubricationleakage:BallBearingHoused UnitsfromTimkenefficientlypreventgreasefromleakingoutoftheinteriorofthebearingbyapplying pressedsealswithaninwardfacinglipthatallowsthegreasetoflowbacktowardtheballsandraceway duringoperation

• Multi-piecesealdesignincludesasteelflingerforadditionalbearingprotection

• Thesealshelpkeepcontaminatesandmoisturefromenteringthebearing.TimkenBallBearingHoused Unitswithmulti-piecesealdesignforeffectivelubricationperformanceandextendedbearinglife

Wehaveexpandedourportfoliowiththemostpopularsizesandhousingdesigns.Theexpandedportfolioisbackedbyaninvestmentininventorytomeetglobalmarketdemandforimmediateshipmentofpopularsizes.

Internalandcustomerfacingbusinesssystemsenablevisibilitytoproductcomponentsandaccuracyofavailabilityandleadtimes,makingorderingeasyandquick.

Timkensupportsourcustomers’jobsiteswithteamsofserviceengineersavailablearoundtheworld.Ourserviceengineersandtechnicianshelpourcustomersextendmaintenancecyclesandmaximizeuptime.

C. VALUE PROPOSITIONTimkenwillprovidehighqualityBallBearingHousedUnitsatpricelevelsthatarecompetitivewithregionalpremiumshareleaders,supportedbylocalizedinventoryprograms.

• Productavailabilityandlocalinventorywillbeonekeytopenetratethismarket

• MoremetricofferingsinBHUlineandcomplimentedbyafulllineofotherhousedunitsalongwiththe expansiverangeofTimkenproductsandservicesweoffertoendusers

• Pricingwillbecompetitivewithregionalpremiumshareleaders

• Steelcagedesignwithstandshightemperatureapplications

• Effective,dualsealdesignprovidesprotectionfromcontaminationandhelpkeepslubricationinthebearing

• TheTimkenBHUisengineeredtomeetourhighqualitystandardsthatourcustomersexpectPremiumBall BearingHousedUnitshelpcustomersimprovetheperformanceoftheirproductsorprocessesandhelpto reduceunscheduleddowntime.Longerlifeandextendedmaintenanceschedulescanreducetheoveralltotal costofownership.

Timken’snewUC-seriesBallBearingHousedUnitofferingprovidesanotherlineofreliableTimken-brandedproductsthatdistributorscanreadilyhaveavailablefortheircustomers.Timken’sBallBearingHousedUnitsarepartofawidevarietyofhousedunitsavailableglobally,includingthefollowingrollerhousedunits:

• SNTsplitplummerblocks

• SAFsplitpillowblocks

• Sphericalrollerbearingsolid-blockhousedunits

• Type-Etaperedrollerbearinghousedunits

Theseproductlineshaveincommonthattheyarecapabletohandledemandingheavyindustrialoperations.Theyareavailableinabroadrangeofstandardshaftsizes,withcoolerrunningbearingswithhigherratings,multiplesealingoptionsandrobusthousings.

Wehavethemostpopularsizesandhousingstylesavailable,competitivepricing,attractivelead-times,andefficientorderingprocesses,allbackedbythequalityandcustomerserviceyouexpectfromTimken.


Table 4: safety stock inventory in RSCs

D. POSITIONING IN THE MARKET• Buildcredibility:positionTimkenasleaderinhousedunits-broadrangeofhousedunits(ballandroller). LeveragetheTimkenbrandreputationforunparalleledreliabilityandquality.

• PositionTimkenasanexperienced/long-timeplayerintheBallBearingHousedUnitmarket.Formorethan 70yearswehavebeenaninnovatorinthisspace,consistentlyimprovingourvaluepropositionbyapplying ourknowledgeofbearings,metallurgy,coatings,sealsandend-userapplicationsforanevengreater performanceandunparalleledcustomersatisfaction.WearelaunchingnowTimken’snewstandardinBall BearingHousedUnits.

• CommunicateTimkenbrandpromise.CustomersbenefitfromTimkenknowledge,servicesupportaftersale andincreasedproductbreath.

• “YoucometousforTRB,SRB,CRB,couplingsandrollerhousedunits,andnowweaddforyouabroadrange ofBallBearingHousedUnitsforallofyourapplicationneeds.”

COMMERCIAL ACTIVITIESA. AVAILABILITY AND INVENTORYWewillmaintainsafetystockofthepopularsizesinglobalwarehouses.Wewillbestockingassembledhousedunitsandreplacementbearinginsertsinourregionalservicecenters(RSCs).

RSCswithsafetystockinventoriesare:

Incaseyouwanttochangeinventorylevels,pleasefollowTimken’sstandardbusinessprocessforlocalinventory.

TheWuxiHousedUnitAssemblyCell(CNWA)assumestheroleoftheinternalhubforreceivingtheproductfromourvendor.ArigidproductinspectionplanhasbeenimplementedinWuxitoensurethatincomingproductsareconsistentlyofahighlevelofqualityandaremadetoourexactingqualityspecifications.Afterthoroughinspection,theBallBearingHousedUnitswillbepackedinTimkenBlackandOrangeboxesanddistributedtotheRegionalServiceCenters(RSCs).

Picture 10: supply chain map for the UC-series

Region Number Of Pieces Value In Std. Cost (USD)

ARB2 - Argentina 0 0

AU02 - Australia 6,200 51,700

BRE2 - Brazil 4,900 50,700

CA65 - Canada TBD TBD

CN04 - China 7,700 65,500

FR02 - Strasbourg 12,200 119,600

IN24A - India 9,700 115,100

MX02 - Mexico 10,500 106,300

SG02 - Singapore 4,900 40,900

US91 – Crossville 13,200 132,300

ZA01 – South Africa 500 4,700


TheUC-seriesBallBearingHousedUnitsareavailableinavarietyofpopularsizes.Table5showsthepartnumberswe’regoingtodevelopsafetystockinventoryfor.TheBallBearingHousedUnitlaunchwillbeginwiththeUC-seriesinMay2014withinventoryavailabilityforthemostpopularsizesupto60mmboresize.Inventoryoflargersizes(≥60mm)willbecomeavailablelaterQ4/2014andinto2015.

Table 5: part number portfolio for Phase 1 of the UC-series product launch

B. SALES PLANThesalestargetsforyears2014–2018aresummarizedinthechartsbelow.

Picture 11: sales plan 2014-2018 by regions

• AlmosteveryproductionfacilityusesBallBearingHousedUnits.HencebeingsuccessfulwithBallBearing HousedUnitsisaboutincludingthenewproductlineineveryend-usercall.

• Withinthefirst90daysoflaunch,eachsalespersonwillcallonaminimumof15enduserswithdemandfor BallBearingHousedUnits.

• ApresentationaboutthenewBallBearinghousedUnitproductlineneedstobeconductedateachofyour distributorbrancheswithin90daysoflaunch.

• Withinyourregion,pleasedocumentthesalespotentialandunderstandthecompetitivedynamics(i.e.who issupplyingthecustomertoday?Whatarethepartnumbers?Whatisthelead-time?Whatisthemarket price?…).Pleasefeedyourinputtotherespectivemarketingteaminyourregion.

• Evaluatethesalesopportunityanddevelopacustomerspecificcallplanandsalesobjectivefor2014and2015.

Launch Dates Family Bearing Insert UC Pillow Block UCP 4-Bolt Flange UCP 2-Bolt Flange UCFL Round Flange UCFC Take-up UCT

May 2014

201UC201 UCP201 UCFL201

UC201-8 UCP201-8 UCFL201-8

202UC202 UCP202 UCFL202

203 UCP202-10 UCFL202-10

203 UC203 UCP203 UCFL203

204UC204 UCP204 UCF204 UCFL204 UCFC204 UCT204

UC204-12 UCP204-12 UCF204-12 UCFL204-12 UCT204-12

205

UC205 UCP205 UCF205 UCFL205 UCFC205 UCT205


UC205-16 UCP205-16 UCF205-16 UCT205-16

206



UC206-19 UCP206-19 UCT206-19

UC206-20 UCP206-20 UCT206-20

207



UC207-22 UCP207-22 UCT207-22

UC207-23 UCP207-23 UCT207-23




UC209-28 UCP209-28 UCF209-28 UCT209-28

210


UC210-31 UCP210-31 UCF210-31 UCF210-32 UCT210-31

UC210-32 UCP210-32 UCF210-32 UCT210-32


UC211-32 UCP211-32 UCF211-32 UCT211-32

212


UC212-36 UCP212-36 UCF212-36 UCT212-36

UC212-39 UCP212-39 UCF212-39 UCT212-39

Q4/2014 and into

2015

213UC213 UCP213 UCF213 UCFC213 UCT213

UC213-40 UCP213-40 UCF213-40 UCT213-40

214 UC214 UCP214 UCF214 UCFC214 UCT214

215UC215 UCP215 UCF215 UCFC215 UCT215

UC215-48 UCP215-48 UCF215-48 UCT215-48

216 UC216 UCP216 UCF216 UCFC216

217 UC217 UCP217 UCF217

218 UC218 UCP218 UCF218

PROPORTIONOFSALESBYREGION GLOBALSALES($M)

SALESEXPECTATIONS


C. PRICING STRATEGYPricingwillbecompetitivewiththepremiumbrandmarketleadersinagivenregion.

• Strategicimperatives

• TargetthecompletepremiumBallBearingHousedUnitmarketwhichconsistsoftheUC-designand theY-design.

• WewilltakesharefromthepremiumcompetitorsfromAsia(NTN,NSK)

• WeexpecttowinselectedsomeSKF/INAbusiness.

• Listpricing

• BallBearingHousedUnitslistpricestobeincludedinTimken’sregionalAMpricelists

• UCBHUPL31PriceList:TimkenEurope’sPriceList31(PL31)willbeusedasourglobalreferencepricelist forallregionsandwillreflectTimken’sP1productpositioningstrategyforBHU.

• ListpricelevelofBHUproductlinealignswithTimken’soverallHousedUnitpricingstrategy.

• Netpricing

• Uselistpriceandapplydiscountappropriatelyfortheregiontogettotargetednetpricelevel

• Proposedguidelinesforregionaldiscountlevelshavebeenprovidedbyproductmanagement/marketingfor eachregion.

FollowTimken’sstandardbusinessprocessesforpricedeviations.

D. INTERCHANGES • Timkenballbearinghousedunitsareavailableinfivedifferenthousingstylestomeettherequirementsof manydemandingapplications.Theyaredimensionallyinterchangeablewithproductofferingsfromothermarket participants(bothUC-designsandY-designs),forallkeycharacteristics,includingtheboltcenterandcenter shaftlinedimensions.

• AcompleteinterchangetableisincludedintheAppendix.ItcoversY-seriesaswellasUC-seriescompetitors.

• Inadditiontheonlineinterchangetoolisloadedwiththeseitems.

E. TECHNICAL DATAThefollowingtablesprovideusefuldetailsrelatedtoshafttolerance,torqueforsetscrewsandbolts,installationinstructionsandlubricationsuggestions.

• Suggestedshafttolerance,boltmountingtorque,setscrewtorque

SUGGESTEDBOLTMOUNTINGTORQUE

mm

BOLT SIZE TIGHTENING TORQUE

Nm

in. ft. – lbs.

3 ⁄8

1⁄2

5 ⁄8

3⁄4

7⁄8

9.0 – 15.5

15.5 – 27.5

39.0 – 68.5

76.5 – 137.0

105.5 – 190.0

(1)Thesearefornormalservice;forheavyloads,highspeedsor verticalshaftapplications,consultyourequipmentmanufacturer oryourlocalTimkenrepresentative.

SUGGESTEDSETSCREWTIGHTENINGTORQUE

SET SCREW SIZE

M6 x 0.75

M8 x 1

M10 x 1.25

M12 x 1.5

mm

in.

1⁄4 – 28 UNF5 ⁄6 – 24 UNF

TIGHTENING TORQUE

Nm

4

8.5

17.5

28

in. – lbs.

35.4

75.2

SUGGESTEDSHAFTTOLERANCE(1)

SHAFT SIZE SHAFT TOLERANCEOver Incl. Min. Max.

mm in.

mm in.

mm in.

mm in.

12.000 18.000 0.000 – 0.011

0.500 0.625 0.000 – 0.0005

19.000 30.000 0.000 – 0.013

0.750 1.000 0.000 – 0.0005

31.000 50.000 0.000 – 0.016

1.125 1.938 0.000 – 0.0005

51.000 80.000 0.000 – 0.019

2.000 3.125 0.000 – 0.0010

81.000 90.000 0.000 – 0.022

3.250 3.500 0.000 – 0.0010

M10

M12

M14

M16

M20

M22

12 – 21

21 – 37

34 – 60

53 – 93

104 – 186

143 – 256


F. E-COMMERCE INTERFACEWeloadede-commercesitesineachsalearea(TimkenStore)tomakeiteasyforcustomerstobuyfromTimken.PleaseseebelowscreenshotofTimkenStorethatillustratesthee-commerceorderingsystem.

G. SUPPLY CHAINTimkenhaspartneredwithahighqualitybearingmanufacturertoproduceaTimken-approvedBallBearingHousedUnit.TheUC-seriesproductsaremanufacturedinAsiatoTimken’sexactingstandardsandareinspectedandpackagedatTimken’sWuxiHousedUnitAssemblyCell(CNWA).TheproductmeetsTimken’sstrictqualityrequirements.

ThesupplychainmodelfortheUC-seriesactuallybuildsonthesuccesswehaveachievedwithradialballbearings,byusingahigh-qualitysupplierpartnerandabuy-brand-sell/sourcedstrategy.

Consistent,annual,qualityaudits–countrytocountry-ofmanufacturingfacilitiesandqualitysystemsgloballyarekeytoguaranteetheworldwidereliabilityofourproduct.AllfacilitiesthatputtheTimken®brandonmanufacturedproductsmustearntheTimken®designation,whethertheyareTimkenmanufacturingfacilitiesorpartofasourced-productstrategy.

• LubricationSuggestions Timkenballbearinghousedunitsareprelubricated.However,periodicrelubricationisadvisableinsome applicationsforwhichtheseunitsaredesigned.Consultyourequipmentmanufacturer’soperatingmanual forthere-lubricationcycle.Generalguidelinesare:

(1)Asaguideline,relubricateuntilthefirstindicationofgreaseisobservedpurgingfromthebearing.

GENERALRELUBRICATIONSUGGESTIONSFORGREASEDBEARINGS(1)

CONDITION RELUBRICATION INTERVAL

Indoor service

Outdoor service

Severe outdoor exposure

High contamination/washdown

Not required

Two/three times per year

Once a month

Once a week

For additional Timken product warnings, visit www.timken.com/warnings.

Failure to observe the following warnings could create a risk of death or serious injury.

Proper maintenance and handling practices are critical. Always follow installation instructions and maintain

proper lubrication.

Overheated bearings can ignite explosive atmospheres. Special care must be taken to properly select, install,

maintain and lubricate housed unit bearings that are used in or near atmospheres that may contain explosive levels of combustible gases or accumulations of dust such as grain,

coal, or other combustible materials. Consult your equipment designer or supplier for installation and

maintenance instructions.

Do not use excessive force when mounting or dismounting the unit.

Follow all tolerance, fit and torque recommendations.

Always follow the Original Equipment Manufacturer’s installation and maintenance guidelines.

Ensure proper alignment.

Never weld housed units.

Do not heat components with an open flame.

Do not operate at bearing temperatures above 121°C (250°F).

WARNING

Failure to follow these cautions may result in property damage.

If hammer and bar are used for installation or removal of a part, use a mild steel bar (e.g., 1010 or 1020 grade). Mild steel bars are less likely to cause release of high speed fragments from the hammer or bar or the part being installed or removed.

Do not use damaged housed units.

CAUTION

1. Ensurethattheshaftisclean,freefromburrs,straight andofproperdiameter.Thebearingshouldnotbe mountedonawornsectionoftheshaft.Usingshaftswith hardnessgreaterthanHRC45willreduceeffectiveness oflockingdevices.Seetableonpage21forsuggested shafttolerances.

2. Installthesuppliedgrease fittingintothethreaded lubricationholeonthe housing.Alignthebearingin itshousingandslidetheunit intopositionontheshaft.

3. Bolthousingtightlytoits mountingsupportsusingan appropriatelysizedfastener andsuggestedbolttorque (page21).Flatwashers shouldbeusedwhen installinganykindof housedunit.Washers shouldbeproperlysizedto boltdiameter.

4.Lockbearingtotheshaftby tighteningeachinnerring setscrewincrementally tosuggestedtorquelevels page21).

• Installationinstructions

Ballbearinghousedunitsareavailableinawide varietyofsizesandhousingstylestoaccommodate acompleterangeofoperatingconditions.

Theseunitsgenerallyhavecast-ironhousingsand aredesignedformountingonstraightshaftswitha slipfit.Thesetscrewlockingmechanismprovides easeinmounting.


• Onlineresources:

• Onlineinterchangetool

• 2Dand3DCADdrawingsandmodelsonwww.timken.com

• PTPlaceandTimkenStore

• SearchEngineOptimization

• Socialmedia–2-3postsonlaunchandavailability(Facebook,LinkedIn)

• Training

• FAQsheet

• Interchangelist

• Productoverviewpresentation–forsalesteams

• Productoverviewpresentation–forcustomers

• Interchangefilesandonlineinterchangetool

• AllliteraturewillbeavailableontheProduct/MarketToolkit.

C. LAUNCH TIMING ProductbeginsarrivinginRegionalServiceCenters(RSCs)inApril,2014.MuchofthesafetystockinventorywillbeinplaceinMayandJune.ProductwillbeavailableforsaleinMay,2014.

SalesshouldbeginaggressivelysellingtheproductbeginninginMay,2014tosupportthelaunch.Customerserviceteamswillbetrainedineachregionontheproductoffering.Contactcustomerserviceforinquiriesonavailabilityortoexpediteproduct,ifneeded.

ENTERING THE MARKET A. MAIN MESSAGES: • Timkenisthemarketleaderforhousedunits.Forover110years,Timkeninnovationscontinuetokeeptheworld inmotion,includingtheinventionofthewideinnerringbearingandtheballbearinghousedunit.

• Wehaveoneofthebroadestrangesofhousedunitsintheindustry.

• Timkenhasafulllineofrollerhousedunits.DistributorscannowaddafulllineofTimken-brandedballhoused unitsatcompetitivepricing.

• Timkennowoffersgreatquality,competitivelypricedballhousedunitsinabroadrangeofpopularsizesand housingstyles.

• ProductsareinterchangeablewithSKF,INA,NSK,NTNandFAG.

• Ballhousedunits,SNT,SAF,TypeE,andSRBSolidBlockRHUseachbringvaluetoourcustomers.Distributors nowhavetheopportunitytopurchasealloftheseproductsfromonesupplier.

• Forthebestvalue,turntoTimkenforhousedunits.TheTimkendifferencebeginswithourbrand,whichis synonymouswithhigh-performanceproducts.Webelieveinprovidingcustomerswiththehighestquality productsolutionfortheirapplication.Wealsoprovidecustomerswiththeindustry’sbesttechnicalexpertsand customersupport.

• Wehavemadetheinvestmentininventorytoprovideshortleadtimesandavailability.

B. MARKETING COMMUNICATIONS TACTICS:• Aseparate,stand-alonebrochurewillbepublished.Itwillinclude:

• Productlineoverview

• Technicaldata

• Catalogdimensions

• Literaturetranslationsin:Chinese,Czech,French,German,Italian,Japanese,Korean,Polish,Brazilian Portuguese,Romanian,Russian,MexicanSpanish,Indonesia,ThaiandVietnamese.

• Asellsheetwillbeavailable.

• TheUC-serieswillbeaddedtotheHousedUnitonlinecatalogandwillbeincludedinfutureprintruns.

• Externalannouncementshavebeendevelopedandwillberolledoutthruproperchannels(e.g.Distributor NewsLines).

• Distributorbulletin

• Distributorad–print

• Distributorportalupdate

• TimkeNETnewsarticle

• Arotatingbanner,tobeincludedinemailsandonwebsites


QUESTION:

CanIuseaFafnirY-seriesinsertinanUCPhousingorviceversa?

Answer:No.Thelocationofthelubricationholeofhousingandinsertwillnotbealigned.

QUESTION:

HowdowepositionthenewUC-seriesagainsttheFafnirlegacyproduct?DowecontinuetoselltheFafnirproduct?

Answer:WewillcontinuetooffertheFafnirproductline.Fromaproductportfoliopointofview,theUC-serieswithsetscrewactuallycomplementsourexistingFafnirproductlinewithlockingcollar.Fromamarketcoveragepointofview,theFafnirproductlineismainlyfocusingontheUnitedStateswherewearenotlaunchingatthistime.

QUESTION:

IfIhaveacustomerwhopurchasestheFafnirseries,doIhavetoswitchthecustomerovertotheUC-series?

Answer:TheUC-serieswillfocusonthemarketsoutsideoftheUnitedStatesandisonlyavailablewithsetscrewlockingdevice.OutsideoftheUnitedStatestheFafnirproductlineisanicheplayerinspecificapplicationsonly.HenceweexpectonlyaninsignificantoverlapbetweenFafnirandthenewUC-series.

QUESTION:

ArethenewUC-styleBallBearingHousedUnitsdimensionallyinterchangeablewithcompetitiveproductlines?

Answer:TheUC-seriesBallBearingHousedUnitsaredimensionallyinterchangeablewithproductofferingsfromothermarketparticipants,forkeycharacteristics,includingtheboltcenterandshaftlinedimensions.

QUESTION:

AreweplanningtolaunchthenewUC-seriesalsointheUnitedStates?

Answer:TodaytheFafnirY-seriesproductlinerepresentsTimken’sBallBearingHousedUnitofferingfortheU.S.market.WearecurrentlyevaluatinghowbesttointroducetheUC-seriescomplementarytoourexistingofferingandwillcommunicatemoreatalaterdate.

QUESTION:

WhydoesthenewUC-serieshaveasteelcagewhencompetitor’sSKFandINAhaveapolymercage?

Answer:SteelisthetypicalcagematerialforUC-stylehousedunitsandispreferredinmanymarketsaroundtheglobe.Inhightemperatureapplicationssteelcagesaresuperiorvs.nyloncages.

QUESTION:

InthepastTimkenhasoftenfollowedSKF’snomenclaturewhenintroducingadditionalproductlinestoourportfolio.Whatisthelogictodivergefromthispath?

Answer:Ouroverallapproachistoalignwithmarketleaderinanygivenproductoffering.FormanyofourrecentlaunchesthathasbeenSKF.InthiscaseSKF’sY-seriesBallBearingHousedUnitproductlineisn’tthemarketleader.Fromaglobalmarketshareperspective,theUC-styleisthepredominantdesign.TheUC-nomenclatureishighlyrecognizedinourtargetindustriesandeasilyinterchangeable.

FAQS

QUESTION:

TimkenissellingthesameproductasFYH.WhyistheTimkenproductmoreexpensive?

Answer:Timken’svaluepropositionisnotlimitedtoproductfeaturesonly.InfactTimkenproductscancommandapremiumpriceduetothefullTimkenvaluepropositionwhichincludesalsotechnicalsupport,shorttermproductavailabilityandstrictqualityrequirements.That’swhyweselltheUC-seriesatapricelevelthatreflectstheprovidedvaluepropositionandisrepresentativeofTimkenproducts.

QUESTION:

DotheTimkenUC-seriesinsertsfitintoanyofourcompetitor’shousings?

Answer:TimkenUC-seriesreplacementbearingsaredimensionallyinterchangeablewithsomeoftheproductofferingsofothermarketparticipants.Whiletheinsertreplacementiscommoninsomeregions,itisveryuncommoninothers.Yourfocusshouldbeonsellingcompletehousedunitsandwerecommendthatourinsertsshouldonlybeusedwithourhousings.Incaseyouhaveasignificantopportunitytosellinsertstoaspecificcustomer,pleasealwaysfirstconsultapplicationengineeringforfurthertechnicalclarificationaswellasmarketingforevaluatingthepotentialriskofcreatingacredibilityissuewiththemarket.

QUESTION:

AretheUC-seriesandtheY-seriesinterchangeable?

Answer:TheUC-seriesandtheY-seriesareonlyfunctionallyinterchangeable(basetocenterheight,boltholespacing).Specificfeatureslikethelocationofthegreasefittingsaredifferentandlimittheactualinterchangeabilityinanexistingend-userapplication.PleasealwaysconsultyourTimkenapplicationengineerformoredetails.


APPENDIXBALL BEARING HOUSED UNITS INTERCHANGES - EUROPEAN

Bore size Timken UC-SeriesPart No.

Timken UC-Series Material ID

Timken Y-series Part No.

Timken Y-Series Material ID

SKFPart No.

INAPart No.

RHPPart no.

mm in.

12 UC201 101698677 GY1008KRRB 100107941 YAR203/12-2F GY1008-KRR-B 1017-12G

0.5 UC201-8 101698678 GY1008KRRB 100107941 YAR203-008-2F GY1008-KRR-B 1017-1/2G

15 UC202 101698679 GY1010KRRB 100140010 YAR203/15-2F GYE15-KRR-B 1017-15G

0.625 UC202-10 101698680 GY1010KRRB 100140010 YAR203-010-2F GY1010KRRB 1017-5/8G

17 UC203 101698681 GYE17KRRB 100010303 YAR203-2F GYE17-KRR-B 1017-17G


0.75 UC204-12 101698683 GY1012KRRB SGT 190001321 YAR204-012-2F GY1012-KRR-B 1020-3/4G

25 UC205 101698684 GYE25KRRB SGT 190001351 YAR205-2F GYE25-KRR-B 1025-25G

0.875 UC205-14 101698685 GY1014KRRB SGT 190001317 YAR205-014-2F GY1014-KRR-B 1025-7/8G

0.9375 GY1015KRRB SGT 190001315 YAR205-015-2F GY1015-KRR-B 1025-15/16G

1 UC205-16 101698686 GY1100KRRB SGT 190001314 YAR205-100-2F GY1100-KRR-B 1025-1G


1.125 UC206-18 101698688 GY1102KRRB SGT 190001358 YAR206-102-2F GY1102-KRR-B 1030-1-1/8G


1.25 UC206-20 - - YAR206-104-2F GY1104 KRRB-206 1030-1-1/4G



1.3125 - - YAR207-105-2F - 1035-1-5/16G





1.5625 - - YAR208-109-2F - -


1.625 GY1110KRRB SGT 190001482 YAR209-110-2F GY1110- KRR-B 1045-1-5/8G

1.6875 GY1111KRRB SGT 190001465 YAR209-111-2F GY1111 KRRB 1045-1-11/16G



1.875 - - - - 1050-1-7/8G


2 UC210-32 - - - - 1050-2G


2 UC211-32 101698701 GY1200KRRB 100123820 YAR211-200-2F GY1200-KRR-B 1055-2G

2.125 - - - - 1055-2-1/8G

2.1875 GY1203KRRB SGT 190011270 YAR211-203-2F GY1203 KRRB 1055-2-3/16G


2.25 UC212-36 101698703 GY1204KRRB 100009150 YAR212-204-2F - 1060-2-1/4G

2.375 - - - - 1060-2-3/8G

2.4375 UC212-39 101698704 GY1207KRRB 100009150 YAR212-207-2F GY1207-KRR-B 1060-2-7/16G

65 UC213 101698705 - - YAR213-2F GYE65-KRR-B 1065-65G

2.5 UC213-40 101698706 - - YAR213-208-2F - 1065-2-1/2G

Continued on next page.





SKFPart No.

INAPart No.

RHPPart no.

mm in.


2.75 - - - - 1075-2-3/4G


2.9375 UC215-47 GY1215KRRB 100069252 YAR215-215-2F - 1075-2-15/16G

3 UC215-48 101698709 - - YAR216-300-2F - 1075-3G

80 UC216 101698710 - - YAR216-2F GYE80-KRR-B 1080-80G

85 UC217 101698711 - - YAR217-2F - 1085-85G

3.25 - - - - 1085-3-1/4G

90 UC218 101698712 - - YAR218-2F GYE90-KRR-B 1090-90G

12 YCJ 1/2 100201443 RCJY 1/2 SF12

0.5 YCJ 1/2 100201443 RCJY 1/2 SF1/2

15 YCJ 5/8 100080861 RCJY 15 SF15

0.625 YCJ 5/8 100080861 RCJY 5/8 SF5/8

17 YCJ 17 100107773 RCJY 17 SF17

20 UCF204 101698749 YCJ 20 SGT 190011486 FYJ 20 TF RCJY 20 SF20

0.75 UCF204-12 101698750 YCJ 3/4 SGT 190001638 FYJ3/4 TF RCJY 3/4 SF3/4


0.875 UCF205-14 101698752 YCJ 7/8 SGT 190001639 FYJ 7/8 TF RCJY 7/8 SF7/8

0.9375 YCJ 15/16 SGT 190001640 RCJY 15/16 SF15/16

1 UCF205-16 101698753 YCJ1 SGT 190001573 FYJ 1 TF RCJY 1 SF1

30 UCF206 101698754 YCJ 30 SGT 190001646 FYJ30 TF RCJY 30 SF30

1.125 YCJ1 1/8 SGT 190001574 RCJY 1-1/8 SF 1 1/8

1.1875 YCJ1 3/16 SGT 190001575 RCJY 1-3/16 SF 1 3/16

1.25 UCF206-20 YCJ1 1/4S 100123642 RCJY 1-1/4-206 SF 1 1/4 R


1.25 UCF207-20 101698756 YCJ1 1/4 SGT 190001577 FYJ 1.1/4 TF RCJY 1 1/4 SF 1 1/4

1.3125 - - -

1.375 YCJ1 3/8 SGT 190001578 RCJY 1-3/8 SF 1 3/8

1.4375 YCJ1 7/16 SGT 190001579 RCJY 1-7/16 SF 1 7/16



1.5625 - - -


1.625 YCJ1 5/8 SGT 190001641 RCJY 1-5/8 SF 1 5/8

1.6875 YCJ1 11/16 SGT 190001642 RCJY 1-11/16 SF 1 11/16



1.875 - - SF 1 7/8

1.9375 UCF210-31 101698762 YCJ1 15/16 SGT 190001644 RCJY 1 15/16 SF 1 15/16

2 UCF210-32 - - SF2R



Continued from previous page.


BALL BEARING HOUSED UNITS INTERCHANGES - EUROPEAN Continued





SKFPart No.

INAPart No.

RHPPart no.

mm in.

2 UCF211-32 101698764 YCJ2 SGT 190011441 FYJ 2. TF RCJY 2 SF2

2.125 - - SF 2 1/8

2.1875 YCJ2 3/16 SGT 190011442 RCJY 2-3/16 SF 2 3/16


2.25 UCF212-36 101698766 YCJ2 1/4 SGT 190011517 - SF 2 1/4

2.375 - - SF 2 3/8

2.4375 UCF212-39 101698767 YCJ2 7/16 SGT 190011518 RCJY 2 7/16 SF 2 7/16

65 UCF213 101698768 FYJ 65 TF RCJY 65 SF65

2.5 UCF213-40 101698769 - FYJ 2.1/2 TF - SF 2 1/2

70 UCF214 101698770 YCJ 70 100200279 FYJ 70 TF RCJY 70 SF70

2.25 YCJ2 1/4 SGT 190011517 - -


2.9375 UCF215-47 YCJ2 15/16 SGT 190011445 - SF 2 15/16

3 UCF215-48 101698772 - - SF3

80 UCF216 101698773 FYJ 80 TF RCJY 80 -

3.125 - -

85 UCF217 101698774 FYJ 85 TF - -

3.25 - -

90 UCF218 101698775 FYJ 90 TF RCJY 90 -

3.5 - -

100 FYJ 100 TF - -

20 UCFC204 101698794 FYC 20 TF RMEY20 FC20


30 UCFC206 101698796 FYC 30TF RMEY30 FC30







65 UCFC213 101698803 FYC 65TF RMEY65 -

70 UCFC214 101698804 RMEY70 -

75 UCFC215 101698805 RMEY75 -

80 UCFC216 101698806 RMEY80 -

85 - -

90 RMEY90 -

12 UCFL201 101698776 YCJT 1/2 SGT 190011526 RCJTY 1/2 SFT12

0.5 UCFL201-8 101698777 YCJT 1/2 SGT 190011526 RCJTY 1/2 SFT1/2

15 UCFL202 101698778 YCJT 5/8 SGT 190011527 RCJTY 15 SFT15

0.625 UCFL202-10 101698779 YCJT 5/8 SGT 190011527 RCJTY 5/8 SFT5/8

17 UCFL203 101698780 YCJT 17 SGT 190011529 RCJTY 17 SFT17

20 UCFL204 101698781 YCJT 20 SGT 190011528 FYTJ 20 TF RCJTY20 SFT20

0.75 UCFL204-12 101698782 YCJT 3/4 SGT 190001652 FYTJ 3/4 TF RCJTY3/4 SFT3/4





SKFPart No.

INAPart No.

RHPPart no.

mm in.


0.875 YCJT 7/8 SGT 190001653 RCJTY 7/8 SFT7/8

0.9375 YCJT 15/16 SGT 190001654 RCJTY 15/16 SFT15/16

1 UCFL205-16 101698784 YCJT1 SGT 190001655 FYTJ 1. TF RCJTY1 SFT1


1.125 YCJT1 1/8 SGT 190001656 RCJTY 1-1/8 SFT 1 1/8


1.25 UCFL206-20 YCJT1 1/4 SGT 190001658 RCJTY 1-1/4-206 SFT 1 1/4 R


1.25 UCFL207-20 101698787 YCJT1 1/4 SGT 190001658 FYTJ 1.1/4 TF RCJTY1 1/4 SFT 1 1/4

1.3125 - - -




1.5 UCFL208-24 101698789 YCJT1 1/2 SGT 190001661 FYTJ 1.1/2TF RCJTY1 1/2 SFT 1 1/2


1.625 YCJT1 5/8 SGT 190001663 RCJTY1 5/8 SFT 1 5/8





2 UCFL210-32 YCJT2S 100201618 - - SFT2R

55 UCFL211 101698792 YCJT 55 SGT 190011532 RCJTY55 SFT55

2 YCJT2 SGT 190011530 RCJTY2 SFT2


60 UCFL212 101698793 RCJTY60 SFT60

2.4375 RCJTY2 7/16 SFT 2 7/16

65 RCJTY65 -

2.5 - -

70 RCJTY70 -

2.75 - -

75 RCJTY75 -

2.9375 UCFL215-47 - - - - -

80 - -

85 - -

3.25 - -

90 - -

12 UCP201 101698713 YAS 1/2 100201436 RASEY 1/2 NP12

0.5 UCP201-8 101698714 YAS 1/2 100201436 RASEY 1/2 NP1/2

15 UCP202 101698715 YAS 5/8 100069190 RASEY 15 NP15

0.625 UCP202-10 101698716 YAS 5/8 100069190 RASEY 5/8 NP5/8

17 UCP203 101698717 YAS 17 100107772 RASEY 17 NP17

20 UCP204 101698718 YAS 20 100201519 SY 20 TF RASEY20 NP20

Continued on next page.Continued on next page.



BALL BEARING HOUSED UNITS INTERCHANGES - EUROPEAN Continued





SKFPart No.

INAPart No.

RHPPart no.

mm in.

0.75 UCP204-12 101698719 YAS 3/4 SGT 190001706 SY 3/4 TF RASEY3/4 NP3/4

25 UCP205 101698720 YAS 25 SGT 190001821 SY 25 TF RASEY25 NP25

0.875 UCP205-14 101698721 YAS 7/8 SGT 190001707 SY 7/8 TF RASEY7/8 NP7/8

0.9375 YAS 15/16 SGT 190001709 SY 15/16 TF RASEY 15/16 NP15/16

1 UCP205-16 101698722 YAS1 SGT 190001710 SY 1. TF RASEY1 NP1


1.125 UCP206-18 101698724 YAS1 1/8 SGT 190001811 SY 1.1/8TF RASEY1 1/8 NP 1 1/8

1.1875 UCP206-19 101698725 YAS1 3/16 SGT 190001812 SY 1.3/16 TF RASEY 1-3/16 NP 1 3/16

1.25 UCP206-20 YAS1 1/4S 100123623 - RASEY 1-1/4-206 NP 1 1/4 R


1.25 UCP207-20 101698727 YAS1 1/4 SGT 190001813 SY 1.1/4 TF RASEY1 1/4 NP 1 1/4

1.3125 - - - -

1.375 UCP207-22 101698728 YAS1 3/8 SGT 190001814 SY 1.3/8TF RASEY1 3/8 NP 1 3/8

1.4375 UCP207-23 101698729 YAS1 7/16 SGT 190001815 SY 1.7/16 TF RASEY 1-7/16 NP 1 7/16



1.5625 - - - -


1.625 YAS1 5/8 SGT 190001817 SY 1.5/8 TF RASEY 1-5/8 NP 1 5/8




1.875 UCP210-30 - - - NP 1 7/8


2 UCP210-32 YAS2S 100201393 - - NP2R


2 UCP211-32 101698737 YAS2 100201392 SY 2. TF RASEY2 NP2

2.125 - - - NP 2 1/8



2.25 UCP212-36 101698739 YAS2 1/4 100093566 SY 2.1/4 TF - NP 2 1/4

2.375 - - - NP 2 3/8

2.4375 UCP212-39 101698740 YAS2 7/16 100123704 SY 2.7/16 TF RASEY2-7/16 NP 2 7/16

65 UCP213 101698741 SY 65 TF RASEY65 NP65

2.5 UCP213-40 101698742 SY 2.1/2 TF - NP 2 1/2

70 UCP214 101698743 SYJ 70 TF RASEY70 NP70

2.75 - - -

75 UCP215 101698744 YAS 75 100200934 SYJ 75 TF RASEY75 NP75

2.9375 UCP215-47 SY 2.15/16 TF - NP 2 15/16

3 UCP215-48 101698745 - - NP3


85 UCP217 101698747 SYJ 85 TF - NP85






SKFPart No.

INAPart No.

RHPPart no.

mm in.

20 UCT204 101698807 YTU 20 TU 20 TF RTUEY20 ST20

0.75 UCT204-12 101698808 YTU 3/4 SGT 190001790 TU 3/4 TF ST3/4

25 UCT205 101698809 YTU 25 SGT 190001802 TU 25 TF RTUEY25 ST25

0.875 UCT205-14 101698810 YTU 7/8 SGT 190001791 TU 7/8 ST7/8

1 UCT205-16 101698811 YTU 1 SGT 190001793 TU 1. ST1


1.125 UCT206-18 101698813 YTU 1 1/8 SGT 190001794 TU 1. 1/8 ST 1 1/8

1.1875 UCT206-19 101698814 YTU 1 3/16 SGT 190001795 TU 1 .3/16 ST 1 3/16

1.25 YTU1 1/4S 100200694 - ST 1 1/4 R


1.25 UCT207-20 101698816 YTU1 1/4 SGT 190001796 TU 1 .1/4 ST 1 1/4

1.3125 - TU 1 .5/16 -

1.375 UCT207-22 101698817 YTU1 3/8 SGT 190001797 TU 1 .3/8 ST 1 3/8

1.4375 UCT207-23 101698818 YTU1 7/16 SGT 190001810 TU 1 .7/16 ST 1 7/16


1.5 UCT208-24 101698820 YTU1 1/2 SGT 190001798 TU1 .1/2 ST 1 1/2

1.5625 - - -

45 UCT209 101698821 YTU 45 SGT 190001808 TU 45 TF ST45

1.625 - - ST 1 5/8

1.6875 YTU1 11/16 SGT 190001799 TU 1.11/16 TF ST 1 11/16

1.75 UCT209-28 101698822 YTU1 3/4 SGT 190001800 TU 1.3/4 TF ST 1 3/4


1.875 UCT210-30 101698824 - - ST 1 7/8

1.9375 UCT210-31 101698825 YTU1 15/16 SGT 190001801 TU1 15/16 ST 1 15/16

2 YTU2S 100201949 - ST2R

55 UCT211 101698826 YTU 55 SGT 190011480 TU 55 TF ST55

2 UCT211-32 101698827 YTU2 SGT 190011478 TU 2. TF ST2

2.125 - - ST 2 1/8

2.1875 YTU2 3/16 SGT 190011479 TU2 3/16 ST 2 3/16

60 UCT212 101698828 TUJ 60 TF RTUEY60 ST60

2.25 UCT212-36 101698829 YTU2 1/4 SGT 190011481 - ST 2 1/4

2.375 - - ST 2 3/8

2.4375 UCT212-39 101698830 YTU2 7/16 SGT 190011482 - ST 2 7/16

65 UCT213 101698831 - RTUEY65 ST65

2.5 UCT213-40 101698832 - ST 2 1/2

70 UCT214 101698833 - RTUEY70 ST70

2.75 - ST 2 3/4

75 UCT215 101698834 -- RTUEY75 ST75

2.9375 - ST 2 15/16

3 UCT215-48 101698835 - ST3

80 - RTUEY80 ST80

85 - ST85






NSK Part No.

NTN Part No.

FAG Black Series Part No.

FYHPart No.

AsahiPart no.

mm in.

75 UC215 101698708 UC215D1 UC215D1 UC215 UC215 UC215

2.9375 UC215-47 UC215-215D1 UC215-215D1 UC215-47 UC215-47

3 UC215-48 101698709 UC215-300D1 UC215-300D1 UC215-48 UC215-48

80 UC216 101698710 UC216D1 UC216D1 UC216 UC216 UC216

85 UC217 101698711 UC217D1 UC217D1 UC217 UC217 UC217

3.25 UC217-304D1 UC217-304D1 UC217-52 UC217-52

90 UC218 101698712 UC218D1 UC218D1 UC218 UC218 UC218

12 UCF201D1 UCF201D1 UCF201 UCF201

0.5 UCF201-008D1 UCF201-008D1 UCF201-08 UCF201-8


0.625 UCF202-010D1 UCF202-010D1 UCF202-10 UCF202-10


20 UCF204 101698749 UCF204D1 UCF204D1 UCF204 UCF204 UCF204

0.75 UCF204-12 101698750 UCF204-012D1 UCF204-012D1 UCF204-12 UCF204-12



0.9375 UCF205-015D1 UCF205-015D1 UCF205-15 UCF205-15

1 UCF205-16 101698753 UCF205-100D1 UCF205-100D1 UCF205-16 UCF205-16


1.125 UCF206-102D1 UCF206-102D1 UCF206-18 UCF206-18

1.1875 UCF206-103D1 UCF206-103D1 UCF206-19 UCF206-19

1.25 UCF206-20 UCF206-104D1 UCF206-104D1 UCF206-20 UCF206-20



1.3125 UCF207-105D1 UCF207-105D1 UCF207-21 UCF207-21

1.375 UCF207-106D1 UCF207-106D1 UCF207-22 UCF207-22

1.4375 UCF207-107D1 UCF207-107D1 UCF207-23 UCF207-23



1.5625 UCF208-109D1 UCF208-109D1 UCF208-25 UCF208-25


1.625 UCF209-110D1 UCF209-110D1 UCF209-26 UCF209-26

1.6875 UCF209-111D1 UCF209-111D1 UCF209-27 UCF209-27



1.875 UCF210-114D1 UCF210-114D1 UCF210-30 UCF210-30


2 UCF210-32 UCF210-200D1 UCF210-200D1 UCF210-32 UCF210-32



2.125 UCF211-202D1 UCF211-202D1 UCF211-34 UCF211-34

2.1875 UCF211-203D1 UCF211-203D1 UCF211-35 UCF211-35


BALL BEARING HOUSED UNITS INTERCHANGES - JAPANESEBore size Timken UC-Series

Part No.Timken UC-Series

Material IDNSK

Part No.NTN

Part No.FAG Black Series

Part No.FYH

Part No.Asahi

Part no.

mm in.

12 UC201 101698677 UC201D1 UC201D1 UC201 UC201 UC201

0.5 UC201-8 101698678 UC201-008D1 UC201-008D1 UC201-08 UC201-8

15 UC202 101698679 UC202D1 UC202D1 UC202 UC202 UC202

0.625 UC202-10 101698680 UC202-010D1 UC202-010D1 UC202-10 UC202-10

17 UC203 101698681 UC203D1 UC203D1 UC203 UC203 UC203

20 UC204 101698682 UC204D1 UC204D1 UC204 UC204 UC204

0.75 UC204-12 101698683 UC204-012D1 UC204-012D1 UC204-12 UC204-12

25 UC205 101698684 UC205D1 UC205D1 UC205 UC205 UC205

0.875 UC205-14 101698685 UC205-014D1 UC205-014D1 UC205-14 UC205-14

0.9375 UC205-015D1 UC205-015D1 UC205-15 UC205-15

1 UC205-16 101698686 UC205-100D1 UC205-100D1 UC205-16 UC205-16

30 UC206 101698687 UC206D1 UC206D1 UC206 UC206 UC206

1.125 UC206-18 101698688 UC206-102D1 UC206-102D1 UC206-18 UC206-18

1.1875 UC206-19 101698689 UC206-103D1 UC206-103D1 UC206-19 UC206-19

1.25 UC206-20 UC206-104D1 UC206-104D1 UC206-20 UC206-20

35 UC207 101698690 UC207D1 UC207D1 UC207 UC207 UC207

1.25 UC207-20 101698691 UC207-104D1 UC207-104D1 UC207-20 UC207-20

1.3125 UC207-105D1 UC207-105D1 UC207-21 UC207-21

1.375 UC207-22 101698692 UC207-106D1 UC207-106D1 UC207-22 UC207-22

1.4375 UC207-23 101698693 UC207-107D1 UC207-107D1 UC207-23 UC207-23

40 UC208 101698694 UC208D1 UC208D1 UC208 UC208 UC208

1.5 UC208-24 101698695 UC208-108D1 UC208-108D1 UC208-24 UC208-24

1.5625 UC208-109D1 UC208-109D1 UC208-25 UC208-25

45 UC209 101698696 UC209D1 UC209D1 UC209 UC209 UC209

1.625 UC209-110D1 UC209-110D1 UC209-26 UC209-26

1.6875 UC209-111D1 UC209-111D1 UC209-27 UC209-27

1.75 UC209-28 101698697 UC209-112D1 UC209-112D1 UC209-28 UC209-28

50 UC210 101698698 UC210D1 UC210D1 UC210 UC210 UC210

1.875 UC210-114D1 UC210-114D1 UC210-30 UC210-30

1.9375 UC210-31 101698699 UC210-115D1 UC210-115D1 UC210-31 UC210-31

2 UC210-32 UC210-200D1 UC210-200D1 UC210-32 UC210-32

55 UC211 101698700 UC211D1 UC211D1 UC211 UC211 UC211

2 UC211-32 101698701 UC211-200D1 UC211-200D1 UC211-32 UC211-32

2.125 UC211-202D1 UC211-202D1 UC211-34 UC211-34

2.1875 UC211-203D1 UC211-203D1 UC211-35 UC211-35

60 UC212 101698702 UC212D1 UC212D1 UC212 UC212 UC212

2.25 UC212-36 101698703 UC212-204D1 UC212-204D1 UC212-36 UC212-36

2.375 UC212-206D1 UC212-206D1 UC212-38 UC212-38

2.4375 UC212-39 101698704 UC212-207D1 UC212-207D1 UC212-39 UC212-39

65 UC213 101698705 UC213D1 UC213D1 UC213 UC213 UC213

2.5 UC213-40 101698706 UC213-208D1 UC213-208D1 UC213-40 UC213-40

70 UC214 101698707 UC214D1 UC214D1 UC214 UC214 UC214

2.75 UC214-212D1 UC214-212D1 UC214-44 UC214-44






NSK Part No.

NTN Part No.


FYHPart No.

AsahiPart no.

mm in.

30 UCFL206 101698785 UCFL206D1 UCFL206D1 UCFL206 UCFL206 UCFL206

1.125 UCFL206-102D1 UCFL206-102D1 UCFL206-18 UCFL206-18


1.25 UCFL206-20 UCFL206-104D1 UCFL206-104D1 UCFL206-20 UCFL206-20


1.25 UCFL207-20 101698787 UCFL207-104D1 UCFL207-104D1 UCFL207-20 UCFL207-20












2 UCFL210-32 UCFL210-200D1 UCFL210-200D1 UCFL210-32 UCFL210-32 -


2 UCFL211-200D1 UCFL211-200D1 UCFL211-32 UCFL211-32




65 UCFL213D1 UCFL213D1 UCFL213 UCFL213 UCFL213





2.9375 UCFL215-47 - - UCFL215-47 - -





12 UCP201 101698713 UCP201D1 UCP201D1 UCP201 UCP201 UCP201

0.5 UCP201-8 101698714 UCP201-008D1 UCP201-008D1 UCP201-08 UCP201-8








0.9375 UCP205-015D1 UCP205-015D1 UCP205-15 UCP205-15



NSK Part No.

NTN Part No.


FYHPart No.

AsahiPart no.

mm in.


2.375 UCF212-206D1 UCF212-206D1 UCF212-38 UC212-38





2.25 UCF214-212D1 UCF214-212D1 - UCF214-44


2.9375 UCF215-47 UCF215-215D1 UCF215-215D1 UCF215-47 UCF215-47



3.125 UCF216-302D1 UCF216-302D1 UCF216-50 UCF216-50


3.25 UCF217-304D1 UCF217-304D1 UCF217-52 UCF217-52


3.5 UCF218-308D1 UCF218-308D1 - UCF218-56

100 - - - - -

20 UCFC204 101698794 UCFC204D1 UCFC204D1 UCFC204 UCFC204 UCFC204













85 UCFC217D1 UCFC217D1 UCFC217 UCFC217 UCFC217

90 UCFC218D1 UCFC218D1 UCFC218 UCFC218 UCFC218











1 UCFL205-16 101698784 UCFL205-100D1 UCFL205-100D1 UCFL205-16 UCFL205-16

BALL BEARING HOUSED UNITS INTERCHANGES - JAPANESE Continued






NSK Part No.

NTN Part No.


FYHPart No.

AsahiPart no.

mm in.

1 UCT205-16 101698811 UCT205-100D1 UCT205-100D1 UCT205-16 UCT205-16

30 UCT206 101698812 UCT206D1 UCT206D1 UCT206 UCT206 UCT206

1.125 UCT206-18 101698813 UCT206-102D1 UCT206-102D1 UCT206-18 UCT206-18


1.25 UCT206-104D1 UCT206-104D1 UCT206-20 UCT206-20



1.3125 UCT207-105D1 UCT207-105D1 UCT207-21 UCT207-21





1.5625 UCT208-109D1 UCT208-109D1 UCT208-25 UCT208-25


1.625 UCT209-110D1 UCT209-110D1 UCT209-26 UCT209-26

1.6875 UCT209-111D1 UCT209-111D1 UCT209-27 UCT209-27





2 UCT210-200D1 UCT210-200D1 UCT210-32 UCT210-32



2.125 UCT211-202D1 UCT211-202D1 UCT211-34 UCT211-34

2.1875 UCT211-203D1 UCT211-203D1 UCT211-35 UCT211-35



2.375 UCT212-206D1 UCT212-206D1 UCT212-38 UCT212-38





2.75 UCT214-212D1 UCT214-212D1 UCT214-44 UCT214-44


2.9375 UCT215-215D1 UCT215-215D1 UCT215-47 UCT215-47


80 UCT216D1 UCT216D1 UCT216 UCT216 UCT216

85 UCT217D1 UCT217D1 UCT217 UCT217 UCT217



NSK Part No.

NTN Part No.


FYHPart No.

AsahiPart no.

mm in.

1 UCP205-16 101698722 UCP205-100D1 UCP205-100D1 UCP205-16 UCP205-16




1.25 UCP206-20 UCP206-104D1 UCP206-104D1 UCP206-20 UCP206-20



1.3125 UCP207-105D1 UCP207-105D1 UCP207-21 UCP207-21

1.375 UCP207-22 101698728 UCP207-106D1 UCP207-106D1 UCP207-22 UCP207-22 UCP207-22




1.5625 UCP208-109D1 UCP208-109D1 UCP208-25 UCP208-25


1.625 UCP209-110D1 UCP209-110D1 UCP209-26 UCP209-26

1.6875 UCP209-111D1 UCP209-111D1 UCP209-27 UCP209-27


50 UCP210 101698734 UCP210D1 UCP210D1 UCP210 UCP210



2 UCP210-32 UCP210-200D1 UCP210-200D1 UCP210-32 UCP210-32



2.125 UCP211-202D1 UCP211-202D1 UCP211-34 UCP211-34

2.1875 UCP211-203D1 UCP211-203D1 UCP211-35 UCP211-35



2.375 UCP212-206D1 UCP212-206D1 UCP212-38 UCP212-38





2.75 UCP214-212D1 UCP214-212D1 UCP214-44 UCP214-44











BALL BEARING HOUSED UNITS INTERCHANGES - JAPANESE Continued



• PulpandPaper/Sawmills/Forestry• WaterTreatment• FoodandBeverageProcessing• Warehousing

• MovableBridges/Structures• IndustrialFans/Blowers

SNTPLUMMERBLOCKSCustomizable Solution, Uptime Efficiency

Timken®SNTPlummerBlocksprovideexcellentbearingprotectionwithcast-ironhousingsandavarietyofsealingoptionstohelpkeepgreaseinandcontaminationout.

SPHERICALROLLERBEARINGSOLID-BLOCKHOUSEDUNITSHeavy-duty Protection, High Performance

Timken®sphericalrollerbearingsolid-blockhousedunitsfeatureruggedcaststeelhousings,precision-madebearings,andawiderangeofshaft-lockingoptionsanddurableseals.Toughenoughtohandleextremelyharshconditions.

DEMANDING INDUSTRIAL OPERATIONSTIMKEN OFFERS A WIDE RANGE OF HOUSED UNITS THAT HANDLE

INDUSTRIESANDAPPLICATIONS

• PowerGeneration(Coal) • Mining• Aggregate/Cement• MetalMills

Timkenoffersafulllineofsplit-andsolid-blockhousedunitsforeverytypeofequipment.Easilyinterchangeablewithindustrystandarddesigns,theTimkenglobaldistributionnetworkmakesiteasytogetTimkenproductsanywhereintheworld–fast.

SAFPILLOWBLOCKSOptimal Load Capacity, Extended Service Life

Timken®SAFPillowBlocksplit-blockhousedunitscombinehigh-performancesphericalrollerbearingswithstronghousingstomeetthechallengesofheavyindustry.

TYPEETAPEREDROLLERBEARINGHOUSEDUNITSImproved Reliability, Enhanced Performance

Timken®TypeEtaperedrollerbearinghousedunitsofferasignificantlylongerdesignlifecomparedtocurrentindustry-leadingdesignsutilizingstandardTimkenbearings.

BALLBEARINGHOUSEDUNITSEasy Installation, Flexible Options

Timken®ballbearinghousedunitsareavailableinawidevarietyoftypesandsizestoaccommodateacompleterangeofindustrialapplicationsandoperatingconditions.

Date post:	01-May-2018
Category:	Documents
Upload:	truonganh
View:	218 times
Download:	0 times

UC-SERIES TIMKEN BALL BEARING HOUSED UNITS - UC-Series Ball Bearing... · Ball Bearing Housed Units...

Documents