ULTRA 1000 Series Wireless Toxic Gas Detectors DESCRIPTION The Ultra1000 Wireless is a battery operated detector to monitor toxic gases in ambient air. The interface and the Radio Transceiver are housed in a flame proof instrument enclosure. The detectors monitors a variety of toxic gases in the parts per million (ppm) range, including: ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen, hydrogen chloride, hydrogen sulfide, nitric oxide, nitrogen dioxide, oxygen deficiency, and sulfur dioxide. The unit is self identifiable to the network of other Pem-Tech gas detectors and wireless controller / monitor. The unit communicates with the controller by transmitting complete data packet including the live gas concentration reading and the sensor diagnostic data such as low battery, sensor fault, and calibration mode. Gas Detection Systems APPLICATIONS: ● Drilling Rigs ● Offshore Platforms ● Petrochemical Industry ● Chemical Storage ● Water & Wastewater Treatment ● Tank Farms ● Refineries KEY FEATURES: ● Auto detect network; sensor comes on-line automatically ● Easy User friendly setup ● Long battery life ● Internal Lithium battery or Solar Panel for continuous operation ● Extended Range with directional antenna ● Available operating frequency: 900 MHz & 2.4 GHz ● Communicates to a range of wireless controllers and gateways
Transcript
ULTRA 1000 Series Wireless Toxic Gas Detectors
DESCRIPTION
The Ultra1000 Wireless is a battery operated detector to monitor toxic gases in ambient air. The interface and the Radio Transceiver are housed in a flame proof instrument enclosure. The detectors monitors a variety of toxic gases in the parts per million (ppm) range, including: ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen, hydrogen chloride, hydrogen sulfide, nitric oxide, nitrogen dioxide, oxygen deficiency, and sulfur dioxide.
The unit is self identifiable to the network of other Pem-Tech gas detectors and wireless controller / monitor. The unit communicates with the controller by transmitting complete data packet including the live gas concentration reading and the sensor diagnostic data such as low battery, sensor fault, and calibration mode.
Gas Detection Systems
APPLICATIONS: ● Drilling Rigs ● Offshore Platforms● Petrochemical Industry● Chemical Storage● Water & Wastewater Treatment● Tank Farms● Refineries
KEY FEATURES: ● Auto detect network; sensor comes
on-line automatically
● Easy User friendly setup
● Long battery life
● Internal Lithium battery or Solar Panel for continuous operation
● Extended Range with directional antenna
● Available operating frequency: 900 MHz & 2.4 GHz
● Communicates to a range of wireless controllers and gateways
ULTRA1000 Wireless Toxic Sensor
Sensor Type Electrochemical Cell
Measuring Ranges
Wireless Frequency License free ISM Band 900 MHz (FHSS) 2.4 GHz (DSSS) International
Operating Range(Line of Sight)
900 MHz : 5 Km 2.4 GHz : 2 Km Greater distance can be achieved using directional antenna
Power Supply Disposable Lithium battery 3.6 volts Optional Rechargeable battery with solar panel for continuous operation. Solar Panel : 5 Watt 6 volts (small profile)
Electrical Classifications
Explosion Proof EnclosureATEX: II 2G Ex d IIC T6 (Tamb= -34° to +100°C) CSA: Class I, Div 1 & 2, Groups B, C & D
Approvals ATEX / IECEx 2.4 GHz Only with internal Lithium battery
Operating Temperature Range
H2S: -40°F to +149°F (-40°C to +65°C) (intermittent) All others: -30°F to +122°F (-34°C to +50°C)
Humidity Range 15 - 90% RH (non condensing)
Storage Temperature
Electronics Interface Module: -40°F to +185°F (-40°C to +85°C) Sensor Head Assembly: 32°F to +68°F (0°C to +20°C) (cell)
