Date post: | 20-Feb-2015 |
Category: |
Documents |
Upload: | marcel-van |
View: | 135 times |
Download: | 1 times |
Heavy Duty Lifting Equipment
Product Catalogue
Product Catalogue
Catalogue No. 120.10
4
Proudly we present to you our catalogue: Van Leusden Heavy Duty Lifting Equipment. During the last decades Van Leusden Heavy Duty products were
applied in a large number of sectors in the market. The products developed
into a well-known and reliable solution, especially in environments where
material quality and long lifetime is an important issue.
Van Leusden Heavy Duty Lifting Equipment is used mainly in three market
sectors where high quality and reliability is a primary demand. For these
markets we have selected our best products and present to you a catalogue
which is divided into three main market / application sections.
You will fi nd the following chapters:
Industry Heavy Duty
Maritime & Offshore
Explosion Protection Solutions
Our products comply with a great
number of rules and regulations in the
various markets as mentioned above.
All our products are produced and
assembled in our own factory. Our
design department is always working
on improvements and special projects
to fulfi l our customers special needs.
You can fi nd your way through our
documentation by following the logo
of your application / market. Should
any questions arise, you can always
contact your local agent or our sales
offi ce directly. We are happy and always
prepared to help you fi nding the best
solution.
Would you like to order directly? You can simply use the specifi ed article
number to place your order. A page
number and type designation is also
a simple way to order your desired
products.
We wish you every success in fi nding
the right solution.
Van Leusden B.V.
WWWWeeeellllcccome to Van LLLLeeussdddddeeeeennnnn BBBBB....VVVVV.....me toooooo Vannnnnnnnnnn LLLLLLLLLLeeeeeusssssdddddeeeennnnn BBBBBBBBBBBBBBBBBBBB VVVVVVVVVVVVVVVVVVVVVme to Van Leusden B Vee
Did you know that you can download our catalogue from our website?
Feel free to visit us at www.vanleusden.comwww.vanleusden.com and go to the download area.
5
Industry Heavy Duty 6
Maritime & Offshore 30
Explosion Protection Solutions 46
6
Industry Heavy Duty
The design is unique in it’s class
This paragraph presents our range of products for heavy duty applications in the indu-
stry sector.
Our Heavy Duty Industrial products have excellent properties for al kinds of extreme
conditions. The products are rigid, constructed for a long life time and low maintenance
costs. The design is unique in it’s class. A force stable design makes the equipment
able to operate under worse operating conditions.
To ensure high safety margins but also a low weight we use where necessary high
tensile materials.
Our range of trolleys and hoists contains:
• Basic trolleys, push and manual geared
• Articulated trolleys for extreme small curves
• Electric driven trolleys
• Swinging beam trolleys to construct your own simple crane
• Manual hoists, and hoist/trolley combinations
• Low headroom trolley/hoist combinations
• For transport of persons we have a separate range of trolleys, complying to EN 1808
Our trolleys and hoists have a high quality standard. The construction is solid, to enable
the trolley to operate for a long time, without any maintenance.
7
All equipment is designed according to the EC machinery directive and the designated European
standards with applicable declaration of conformity.
Should you have any special request which is not mentioned in this catalogue, please feel free to
contact us. We will help you fi nding your specifi c solution.
Galvanized construction parts and sealed
bearings make the trolley suitable for out-
door conditions with a long lifetime.
A generic design of wheels, making the
trolley suitable for different beamtypes,
is integrated in the standard trolley. The
trolley combines excellent with the hoists
as presented in this catalogue.
The products mentioned above can be
delivered with a wide range of options.
We refer to the special options page of
this chapter for detailed descriptions.
Apart from trolleys and hoists you will also
fi nd our standard range of hand driven
cranes and crane components.
All our cranes and crane-components are
de signed and manufactured at our own
factory.
Trolleys
Push & geared / Standard type 8
Push & geared / Articulated 9
Push / Swinging beam 10
Hoists Hand driven chain hoists 11
Hoist-Trolley units Hand driven / Standard 12
Hand driven / Low headroom 13
Hand driven / Ultra low headroom 14
Trolleys Transport of persons / EN1808 15
Electrical / Wormgeared motor 16
Electrical / Geared motor with brake 17
Electrical / Articulated 18
Electrical / Swinging beam 19
Hoist Electrical Chain hoist &
Combinations I 20
Electrical Chain hoist &
Combinations II 21
Cranes Hand operated / Swinging
beam cranes 22
Hand operated / Underslung crane 23
Hand operated / Overhead crane 24
Components Wheels / Single fl ange 25
Wheels / Double fl ange 26
Hand chain wheels / Pinions 27
Options Industry Heavy Duty 28
8
Features:
• Capacities 500-25.000 Kg
• Unique 3 bolts design, safety & stability
• Long life time, low operational costs
• Suspension of all types of hoists
• Suitable for all types of beams
• Electric galvanized chassis, suspension bolts and
wheels up to 64 KN model
• Models 84 KN and higher, standard surface
treatment, 2 layer Alkyd paint 80 μm, RAL7021
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
Optional:
• Fixed beam execution
• Straight suspension bolt with spacers
• Extra suspension set for other beam range
• Rubber buffers on trolley
• Extended chain wheel drive, M=....mm (max. 300 mm)
• Special side plates to increase dimension “E”
• Stainless steel name plates
• Load test, with certifi cate
• Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page
42 of this catalogue for detailed application
information
N L
R
C
AB
E HFG
W
O
D
M
Trolleys | Push & geared / Standard type
Technical information:
1) *Mass plain type
** Mass Geared type, excl. hand chain 1 mtr Lift = 1 Kg.
2) For curved beams always contact us or your local Agent
3) Max. INP profi le restriction for 6 KN = INP220,
11KN = INP300, 22KN = INP360, 33 KN = INP400,
52/64 KN = INP450.
min. beamwidth
max. beamwidth
bw = beamwidth
Trolleys / Push & Geared / Standard type (Art. group 81000-81200)
Capacity
Kg.
Hoist
Mass
Max.
Kg.
Chassis
Type
Adjustable
beam width
min~max
mm. 3)
R (min).
Radius
Beam 2)
mm.
Dimensions Chain
Pull
Max.
Kg.
Weight
Kg.
1)
*-**
Push
81000..
Art. Nr.
Push
Price €
Geared
81200..
Art. Nr.
Geared
excl.
Hand-
chain
Price €
Galvanized
Handchain
Control
length
Price / m €
Stainless
Handchain
Control
length
Price / m €
A B C L H W R D E F G M N O
500 100 6 KN55~102
1000 45 60 15 150 125160
75 52 15 45 30 - - - - 3..-00600 -/-
105~152 210 ..-00601 -/-
1.000 120 11 KN
55~102
1500 60 75 18 190 160
175
99 60 20 60 30 65 90 100 10 5-6
..-01100 ..-01100
105~152 225 ..-01101 ..-01101
156~203 275 ..-01102 ..-01102
207~254 325 ..-01103 ..-01103
2.000 250 22 KN
74~127
1600 80 100 22 255 205
215
123 75 27 80 35 65 90 100 16 11-12
..-02200 ..-02200
127~180 270 ..-02201 ..-02201
190~243 330 ..-02202 ..-02202
254~305 390 ..-02203 ..-02203
3.200 150 33 KN
90~143
2000 100 120 25 300 245
250
144 90 35 100 40 70 95 100 20 18-19
..-03300 ..-03300
149~203 310 ..-03301 ..-03301
203~254 360 ..-03302 ..-03302
251~305 410 ..-03303 ..-03303
5.000 300 52 KN
106~156
2900 125 150 30 375 305
270
174 117 40 120 60 100 130 135 20 31-32
..-05200 ..-05200
160~210 325 ..-05201 ..-05201
210~260 375 ..-05202 ..-05202
255~305 420 ..-05203 ..-05203
6.300 200 64 KN
106~156
2900 125 150 30 375 310
270
174 117 40 120 60 100 130 135 25 33-34
..-06400 ..-06400
160~210 325 ..-06401 ..-06401
210~260 375 ..-06402 ..-06402
255~305 420 ..-06403 ..-06403
8.000 550 84 KN fi xed (119 Min)
3500
160 190 35 450 365 bw+150 220 145 45 145 80 105 130 270 16 85-90 ..-08401 ..-08401
10.000 600 104 KN fi xed (131 Min) 160 190 35 450 370 bw+150 220 145 45 145 80 105 130 270 19 90-95 ..-10401 ..-10401
12.500 150 124 KN fi xed (143 Min) 160 190 35 450 370 bw+150 220 145 45 145 80 105 130 270 23 95-100 ..-12401 ..-12401
16.000 700 164 KN fi xed (155 Min)
5500
200 240 50 550 445 bw+185 272 165 42 165 100 135 170 300 20 135-145 ..-16401 ..-16401
20.000 800 204 KN fi xed (170 Min) 200 240 50 550 450 bw+185 272 165 42 165 100 135 170 300 25 140-150 ..-20401 ..-20401
25.000 900 254 KN fi xed (185 Min) 200 240 50 550 455 bw+195 272 165 42 165 100 135 170 380 25 150-160 ..-25401 ..-25401
9
E
T
B A
C
O
N
M
L
GD
R
Trolleys / Push & Geared / Articulated (Art. group 83300)
Capacity
Kg.
Hoist
Mass
Max.
Kg.
Chassis
Type
Beam width
fi xed
mm.
R (min).
Radius
Beam 2)
mm.
DimensionsChain
Pull
Max.
Kg.
Push
83300
Art. Nr.
Push
Price €
Geared
83300
Art. Nr.
Geared
excl.
Handchain
Price €
Galvanized
Handchain
Control
length
Price / m €
Stainless
Handchain
Control
length
Price / m €
A B C D E G L R M N O T
500 100 11 KN fi xed 400 60 75 18 148 18 59 455 300 70 95 100 63 10 ..-01101 ..-01111
1.000 120 11 KN fi xed 400 60 75 18 145 18 64 455 300 70 95 100 63 10 ..-01102 ..-01112
2.000 250 22 KN fi xed 450 80 100 22 152 20 73 525 350 73 98 135 66 16 ..-02201 ..-02211
3.200 150 33 KN fi xed 500 100 120 25 191 20 73 570 380 77 102 195 70 20 ..-03301 ..-03311
5.000 300 52 KN fi xed 600 125 150 30 197 26 100 625 400 79 109 195 72 20 ..-05201 ..-05211
6.300 200 64 KN fi xed 600 125 150 30 214 26 100 675 450 82 112 270 75 25 ..-06401 ..-06411
8.000 550 84 KN fi xed 800 160 190 35 208 33 130 705 450 87 107 300 80 16 ..-08401 ..-08411
10.000 600 104 KN fi xed 900 160 190 35 261 33 130 780 500 87 107 380 80 19 ..-10401 ..-10411
12.500 150 124 KN fi xed @ 160 190 35 @ @ @ @ @ @ @ @ @ 23 ..-12401 ..-12411
16.000 700 164 KN fi xed @ 200 240 50 @ @ @ @ @ @ @ @ @ 20 ..-16401 ..-16411
20.000 800 204 KN fi xed @ 200 240 50 @ @ @ @ @ @ @ @ @ 25 ..-20401 ..-20411
25.000 900 254 KN fi xed @ 200 240 50 @ @ @ @ @ @ @ @ @ 25 ..-25401 ..-25411
@ = on request
Technical information:
1) Max. INP profi le restriction for 11KN = INP300, 22KN =
INP360, 33 KN = INP400, 52/64 KN = INP450.
2) Extreme small beamwidth-combination with Radius,
please contact us or your local agent.
Trolleys | Push & geared / Articulated
Features:
• Capacities 500-25.000 Kg
• Developed for extreme small curved beams
• Suspension of all types of hoists
• Excellent characteristics due to special slewing
points and guidance wheels
• Articulated trolley always designed for one specifi c
fi xed beam type
• Standard surface treatment, 2 layer Alkyd paint
80 μm, RAL 7021
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
Optional:
• Special constructional design to suit specifi c hoist type
• Rubber buffers on trolley
• Stainless steel name plates
• Load test, with certifi cate
• Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page
42 of this catalogue for detailed application
information
10
Trolleys | Push / Swinging beam
Trolleys / Push / Swinging beam (Art. group 82000)
Max.
Trolley
Capacity
Kg.
Chassis
Type
Max.
Beamwidth
mm.
Suspension
GK…DO
DimensionsWeight
Kg.
Push
82000..
Art. Nr.
Trolley
Price
Each €
Mounting
Plate
Price
Each €
A B C E L R S T J N D Z
1.100 11 KN
120 20
60 75 18 20 190 99 3) 125
100
40 60 300 6
..-01110
240 25 105 ..-01120
305 30 110 ..-01130
2.250 22 KN
113 25
80 100 22 27 255 123 3) 150
120
50 75 380 12
..-02210
210 30 125 ..-02220
305 35 135 ..-02230
3.350 33 KN
131 30
100 120 25 35 300 144 3) 175
140
60 90 435 20
..-03310
220 35 150 ..-03320
305 40 160 ..-03330
5.300 52 KN
131 35
125 150 30 40 375 174 3) 200
180
65 117 575 32
..-05210
210 40 185 ..-05220
310 45 195 ..-05230
Features:
• Range from 1.100 Kg till 5.300 Kg Trolley capacity
• Smooth running across crane gantry by fl exible
suspension system
• Suspension of crane girder by ball joint
• Material ball joint S355, suitable for welding
• Fixed beam width for specifi ed crane gantry beam
• Electric galvanized chassis, and wheels. Suspension
set in Zinc primer + top coat
Optional:
• Mounting plate for bolt suspension to crane girder
• Rubber buffers on trolley
• Load test, with certifi cate
• For suitable hoist and trolleys see our other
catalogue pages
• Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page 42
of this catalogue for detailed application informationJ
A B
C
N
TST L
R
E
D
Technical information:
Projecting the right Swinging beam trolley for your crane:
(example)
Safe working load crane : 1.000 Kg
Total weight hoist / trolley unit : 75 Kg
Total weight crane girder 250/2 = : 125 Kg +
Calculated trolley load : 1.200 Kg
---> See Table, trolley type 22 KN
1) For determination of the size of crane girders we refer
to page 64 of this catalogue.
2) Always state your crane girder type, for production of
the suitable mounting plate.
3) Maximum span (S) is 8 meters for all capacities.
4) For cranes with an outreach larger than T (see table)
contact us or your local supplier
5) Max. INP profi le restriction for 11KN = INP300,
22KN = INP360, 33 KN = INP400, 52/64 KN = INP450.
« mounting plate
11
Hoists | Hand driven chain hoists
Hoist / Hand chain driven hoists (Art. group 89102)
Capacity
Kg.
Head-
room
G
mm
Max.
Pull
Handchain
Kg.
No.
Off Falls
Chain
dimension
mm
Weight
3 mtrs.
Lift
Kg.
Dimensions Hoist
89102..
Art. Nr.
Basic
3 mtrs. Lift
Execution
Price €
Load
Chain
per m
Price €
Hand
Chain
per m
Price €
Loadchain
Stainless St.
per m
Price €
Handchain
Stainless St.
per m
Price €
Overload
Protection
Price €
Option Option
A B D E F F1
Protection
86810..
Art. Nr.
Non
Corrosive
ZincAl
Price €
Protection
86810..
Art. Nr.
Non
Corrosive
AISI
Price €
Reduced Capacity!!
500 260 21 1 5 8 82 56 90 48 30 24 ..-00500 ..-00575 ..-00585
1.000 300 24 1 6,3 10,5 83 63 100 59 36 29 ..-01000 ..-01075 ..-01085
1.600 345 29,5 1 7,1 15 90 75 115 69 39 31 ..-01600 ..-01675 ..-01685
2.000 380 33,5 1 7,9 21 98 85 132 82 42 34 ..-02000 ..-02075 ..-02085
3.200 435 38 1 10 30,5 106 92 160 94 48 39 ..-03000 ..-03075 ..-03085
5.000 575 36 3 7,1 35 90 75 188 94 56 47 ..-05000 ..-05075 ..-05085
10.000 790 43 3 10 76 106 92 283 122 75 68 ..-10000 ..-10075 ..-10085
16.000 1020 47 5 10 155 106 92 340 205 90 81 ..-16000 ..-16075 ..-16085
20.000 1040 45x2 6 10 250 153 153 390 390 90 81 ..-20000 ..-20075 ..-20085
25.000 1100 44x2 8 10 320 185 185 390 390 90 81 ..-25000 ..-25075 ..-25085
32.000 1470 47x2 10 10 440 215 215 400 400 110 95 ..-32000 ..-32075 ..-32085
@ = on request
F
F1
GLI
FT
B A E D
G
F
F1
GLI
FT
B A E D
G
LIF
T
F1
F
G
AB DE
G
F1F
GLI
FT
A B D E
G
Technical information
Stainless steel load chain results in a reduced capacity for
the hoist. The following capacities shall be observed :
S.W.L. No. of Chain diam. Reduced Capacity
ton falls mm ton
0.5 1 5 0.5
1 1 6.3 1
1.6 1 7.1 1.25
2 1 7.9 1.25
3 1 10 2
5 3 7.1 3.75
10 3 10 6
16 5 10 10
20 6 10 12
25 8 10 16
32 10 10 20
Features:
• Capacities 500-32.000 Kg. in standard execution
• Super modern, excellent combination with standard
HD3C trolleys
• Compact & Low weight
• Low headroom
• Low pulling effort on the handchain
• 2 independent brake pawls to enhance safety &
protection
• Automatic load brake
• Heavy duty reduction gear & load sheaves
• High safety factor
Optional:
• Integration directly into standard trolley possible to
get the lowest headroom possible, see page 12
• Low and ultra low headroom types available,
see page 13 & 14.
• Overload protection
• Load test, with certifi cate
• Stainless Steel load chain, available on request
(reduced capacity)
• Non corrosive execution, with special protection by
fl ame spraying, in ZincAl or special paint system.
See page 42 for more information
500 Kg - 3.200 Kg
5.000 Kg - 10.000 Kg
16.000 Kg 20.000 Kg - 32.000 Kg
12
Hoist-Trolley units | Hand driven / Standard
Hoist-Trolley units / Hand driven / Standard type (Art. group 81250-81255)
Capacity
Kg.
Headroom
G
mm.
No.
off
Fals
Trolley
Chassis
Type
Adjustable
beam width
min~max
mm.
R(min).
Radius
Beam
mm.
Dimensions
Weight
Kg.
3 mtr
Hoist / trolley
Push (3 mtrs)
81250..
Hoist / trolley
Geared (3 mtrs)
81255..
Hoist
Loadchain
lifting height
Price / m €
Hoist & trolley
Handchain
control height
Price / m €
Overload
Protection
Price €
A B C E F F1 R L N O n
Art. Nr. Price € Art. Nr. Price €
500 315 1 6 KN55~102
1000 45 60 15 15 30 24 75 150 - - - 11..-00600 -
105~152 ..-00601 -
1.000 360 1 11 KN
55~102
1500 60 75 18 20 36 29 99 190 90 100 2.5m 20
..-01100 ..-01100
105~152 ..-01101 ..-01101
156~203 ..-01102 ..-01102
207~254 ..-01103 ..-01103
1.600 420 1 22 KN
74~127
1600 80 100 22 27 39 31 123 255 90 100 2.5m 30
..-01600 ..-01600
127~180 ..-01601 ..-01601
190~243 ..-01602 ..-01602
254~305 ..-01603 ..-01603
2.000 455 1 22 KN
74~127
1600 80 100 22 27 42 34 123 255 90 100 2.5m 36
..-02200 ..-02200
127~180 ..-02201 ..-02201
190~243 ..-02202 ..-02202
254~305 ..-02203 ..-02203
3.200 525 1 33 KN
90~143
2000 100 120 25 35 48 39 144 300 95 100 2.5m 53
..-03300 ..-03300
149~203 ..-03301 ..-03301
203~254 ..-03302 ..-03302
251~305 ..-03303 ..-03303
5.000 690 3 52 KN
106~156
2900 125 150 30 40 56 47 174 375 130 135 2.5m 70
..-05200 ..-05200
160~210 ..-05201 ..-05201
210~260 ..-05202 ..-05202
255~305 ..-05203 ..-05203
10.000 935 3 104 KN fi xed (131 Min) 3500 160 190 35 45 75 68 220 450 130 270 2.5m 175 ..-10401 ..-10401
16.000 1185 5 164 KN fi xed (155 Min)
5500
200 240 50 42 90 81 272 560 170 300 2.5m 305 ..-16401 ..-16401
20.000 1205 6 204 KN fi xed (170 Min) 200 240 50 42 90 81 272 560 170 300 2.5m 415 ..-20401 ..-20401
25.000 1265 8 254 KN fi xed (185 Min) 200 240 50 42 90 81 272 570 170 380 2.5m 495 ..-25401 ..-25401
Features:
• Capacities 500-25.000 Kg in standard headroom
execution
• Advantages and high quality combined in one
combo pack unit
• Low in weight, compact headroom
• Low pulling force on the hand chain
• Standard adjustable fl ange width in different ranges
• Electric galvanized trolley chassis, suspension bolts
and wheels up to 64 KN model
• Hoist unit powder coating, orange colour RAL2008
• Trolley model 104 KN and higher, standard surface
treatment, 2 layer Alkyd paint 80 μm, RAL 7021
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
• Suitable for all types of beams
Optional:
• Stainless steel name plate
• Rubber buffers
• Load test, with certifi cate
• Overload protection
• Stainless Steel load chain, available on request
(reduced capacity)
• Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page 42
of this catalogue for detailed application information
F1
F
N
LIF
TG
E
B A O
R
L
n
C
Technical information:
For detailed technical information about hoist and trolley
please refer to the individual pages for these products.
--->For trolleys : Page 8
--->For manual hoist : Page 11
1) For curved beams always contact us or your local Agent
2) Max. INP profi le restriction for 6 KN = INP220,
11KN = INP300, 22KN = INP360, 33 KN = INP400,
52/64 KN = INP450.
13
Hoist-Trolley units / Hand driven / Low headroom (Art. group 81300-81400)
Capacity
Kg.
Headroom
G
mm.
No.
off
Fals
Trolley
Chassis
Type
Fixed for
beam width
in range
mm.
DimensionsWeight
Kg.
3 mtr
Hoist / trolley
Push (3 mtrs)
81300
Hoist / trolley
Geared (3 mtrs)
81400
Hoist
Loadchain
lifting height
Price / m €
Hoist & trolley
Handchain
control height
Price / m €
Overload
Protection
Price €
A B C E F F1 R T L M N O n
Art. Nr. Price € Art. Nr. Price €
500 210 1 6 KN 55-300 45 60 15 15 30 24 75 33 248 - - - - 12 ..-00600 -
1.000 245 1 11 KN 55-300 60 75 18 20 36 29 99 42 310 65 90 100 2.5m 22 ..-01100 ..-01100
2.000 315 1 22 KN 74-300 80 100 22 27 42 34 123 49 395 65 90 100 2.5m 40 ..-02200 ..-02200
3.200 370 1 33 KN 90-300 100 120 25 35 48 39 144 59 455 70 95 100 2.5m 60 ..-03300 ..-03300
5.000 475 3 52 KN 106-300 125 150 30 40 56 47 174 65 590 100 130 135 2.5m 75 ..-05200 ..-05200
Remark: These units will be manufactured on a fi xed beamwith in the range as specifi ed in the table.
Hoist-Trolley units | Hand driven / Low headroom
OB A
E
N
LIF
TG
C
F1
F
M
T
n
R
L Technical information:
1) For curved beams always contact us or your local Agent
2) Max. INP profi le restriction for 6 KN = INP220,
11KN = INP300, 22KN = INP360, 33 KN = INP400,
52/64 KN = INP450.
Features:
• Capacities 500-5.000 Kg in low headroom execution
• Suitable for narrow spaces and low headroom applications
• Low in weight, compact design
• Low pulling force on the hand chain
• The hoist has double safety pawl, safe and sure brakes
• Trolley manufactured for fi xed beamwidth in
different ranges
• Trolley standard surface treatment, 2 layer Alkyd
paint 80 μm, orange colour RAL2008
• Hoist unit powder coating, orange colour RAL2008
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
Optional:
• Rubber buffers on trolley
• Load test, with certifi cate
• Overload protection
• Stainless Steel load chain, available on request
(reduced capacity)
• Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page
42 of this catalogue for detailed application
information
14
Hoist-Trolley units | Hand driven / Ultra low headroom
Hoist-Trolley units / Hand driven / Ultra low headroom (Art. group 81650)
Capacity
Kg.
Headroom
G
mm.
No.
off
Fals
Trolley
Chassis
Type
Fixed
beam width
in range
mm
Dimensions Weight
Kg.
3 mtr
Hoist / trolley
geared (3 mtrs)
81650
Hoist
Loadchain
lifting height
Price / m €
Hoist / trolley
Handchain
Control height
Price / m €
Overload
Protection
Price €
A B C E F F1 R L N U O n
Art. Nr. Price €
1.000 125 2 22 KN 74-300 80 100 22 20 36 29 226 465 140 105 100 2.5m 40 ..-01100
2.000 150 2 33 KN 90-300 100 120 25 20 42 34 266 550 145 150 135 2.5m 120 ..-02200
3.200 170 2 52 KN 106-300 125 150 30 26 48 39 310 635 175 150 135 2.5m 150 ..-03300
6.000 285 2 84 KN 119-300 160 190 35 33 75 68 430 900 225 200 300 2.5m 300 ..-06400
Remark: These units will be manufactured on a fi xed beamwith in the range as specifi ed in the table.
Features:
• Suitable for extreme narrow spaces and extreme
Low headroom applications
• Capacities 1.000-6.300 Kg in Ultra low headroom
execution
• Low in weight, ultralow headroom
• Low pulling force on the hand chain
• The hoist has double safety pawl, safe and sure
brakes
• Complete unit with standard surface treatment,
2 layer Alkyd paint 80 μm, orange colour RAL2008
Optional:
• Capacity > 6 ton
• Rubber buffers on trolley
• Load test, with certifi cate
• Overload protection
• Stainless Steel load chain, available on request
(reduced capacity)
• Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page
42 of this catalogue for detailed application
information
E
U Nn
F1
F
O
GLI
FT
R
L
AB
C
Technical information:
1) Capacity up till 25 ton possible.
2) Max. INP profi le restriction for 22KN = INP360,
33 KN = INP400, 52/64 KN = INP450.
15
W
T
S
E
D
C
AB
N
M
O
H
R
L
GF
Trolleys | Transport of persons / EN1808
Trolleys / Transport of persons / EN1808 (Art. group 81700-82700)
Capacity
Kg.
Hoist
Mass.
Max.
Kg.
Chassis
Type
Beam Width
Fixed
“bw”
mm.
R(min).
Radius
Beam
mm.
Dimensions
A B C L H W R D E F G N M O T N1 2) N2 U
320 120 11 KN fi xed 1500 60 75 18 190 150 bw+70 99 60 20 60 30 90 65 100 40 - - -
630 250 22 KN fi xed 1600 80 100 22 255 195 bw+85 123 75 27 80 35 90 65 100 50 320 150 235
1.000 150 33 KN fi xed 2000 100 120 25 300 235 bw+105 144 90 35 100 40 95 70 100 55 325 175 245
1.600 300 52 KN fi xed 2900 125 150 30 375 295 bw+120 174 117 40 120 60 130 100 135 65 345 190 275
2.000 200 64 KN fi xed 2900 125 150 30 375 300 bw+120 174 117 40 120 60 130 100 135 65 345 210 275
2.500 550 84 KN fi xed 3500 160 190 35 450 365 bw+150 220 145 45 145 80 135 115 270 80 370 210 285
3.200 600 104 KN fi xed 3500 160 190 35 450 370 bw+150 220 145 45 145 80 135 115 270 80 420 210 285
4.000 150 124 KN fi xed 3500 160 190 35 450 375 bw+150 220 145 45 145 80 135 115 270 80 420 210 285
For a suitable technical and commercial proposal, please contact us or your local agent.
S
N1
S
N2 ½L U Technical information:
1) For curved beams always contact us or your local Agent
2) N1 for Single speed motor 1V
3) Max. INP profi le restriction for 11KN = INP300,
22KN = INP360, 33 KN = INP400, 52/64 KN = INP450.
Features:
• Capacities 320-4.000 Kg
• Capacity including persons and materials
• According to EN 1808 every trolley load tested and
stamped
• Trolleys for transport of persons are always designed
for fi xed beam
• Electric galvanized chassis and wheels up to 64 kN
model. Suspension bolts with zinc primer
• Models 84 KN and higher, standard surface
treatment, 2 layer Alkyd paint 80 μm, RAL7021
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
Optional:
• Triangular suspension safety plate with lugs for
hoisting line and safety line
• Rubber buffers on trolley
• Special side plates to increase dimension “E”
• Stainless steel name plates
• Electric trolleys:
• Switch box with 2 relays for trolley drive
• Necessary counterweight if applicable
• Limit switches, mounted on trolley, excl. cabling
• Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page 42
of this catalogue for detailed application information
bw = beamwidth
16
Trolleys | Electrical / Wormgeared motor
Trolleys / Electrical / Wormgeared motor (Art. group 82400)
Capacity
Kg.
Hoist
Mass
Max.
Kg.
Chassis
Type
Adjustable
beam width
min~max
mm.
R(min).
Radius
Beam
mm 2)
Dimensions Weight
Kg.
Speed
m/min
Trolley
82400..
Art. Nr.
Trolley +
Motor
Price €
Relay
Box*
1V
Price €
Limit
Switches
Price €A B C L H W R D E F G N2 U P
1.000 250 22 KN
74~127
1600 80 100 22 365 200
215
123 75 27 80 35 150 235 105 16 10
..-01210
127~180 270 ..-01211
190~243 330 ..-01212
254~305 390 ..-01213
2.000 250 22 KN
74~127
1600 80 100 22 365 200
215
123 75 27 80 35 150 235 105 16 10
..-02210
127~180 270 ..-02211
190~243 330 ..-02212
254~305 390 ..-02213
3.200 150 33 KN
90~143
2000 100 120 25 385 245
250
144 90 35 100 40 171 245 115 23 10
..-03310
149~203 310 ..-03311
203~254 360 ..-03312
251~305 410 ..-03313
5.000 300 52 KN
106~156
2900 125 150 30 435 290
270
174 117 40 120 60 187 275 130 39 10
..-05210
160~210 325 ..-05211
210~260 375 ..-05212
255~305 420 ..-05213
6.300 200 64 KN
106~156
2900 125 150 30 435 295
270
174 117 40 120 60 190 275 130 41 10
..-06410
160~210 325 ...-06411
210~260 375 ..-06412
255~305 420 ..-06413
* Relay Box : Terminal box with relay switching set, excl. transformer, excl. terminals, mounted on the trolley. Cable from motor to relaybox included.
Pendant control switch and control cable excluded.
Control voltage 24V or 48V.
Features:
• Capacities 500 up to 6.300 Kg
• Self braking worm geared motor, no separate
electromagnetic brake
• Combine with all types electrical chain hoists
• Trolley with motor/gearbox, without contactor
controls and control box
• Single speed design smooth acceleration and stopping
• Motor IP54, ISO F, 400/230V - 3 Ph - 50Hz, standard
manufacturers’ surface treatment
• Electric galvanized chassis, suspension bolts and
wheels up to 64 KN model
Optional:
• Rubber buffers on trolley
• Switch box with relays for trolley drive for integration
with hoist*
• Integration with electric chain hoist unit
• Limit switches, mounted on trolley, excl. cabling
• Straight suspension bolt with spacers or bushings
• Extra suspension set for other beam range
• Special side plates to increase dimension “E”
• Load test, with certifi cate
• Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page 42
of this catalogue for detailed application information
C N2
P
E
W
AB
D
L
H
U
G
R
F
Technical information:
1) Excl. additional counterweight (if applicable)
2) For curved beams always contact us or your local Agent
- Trolleys suitable for curved beams are executed
with a guide roller set.
- Details to be provided with order.
3) These trolleys are not suitable for manufacturing of
cranes or twin driven trolleys.
4) Max. INP profi le restriction for 22KN = INP360,
33 KN = INP400, 52/64 KN = INP450.
17
Trolleys / Electrical / Geared motor with brake (Art. group 82500)
Capacity
Kg.
Hoist
Mass
Max.
Kg.
Chassis
Type
Adjustable
beam width
min~max
mm.
R(min).
Radius
Beam
mm 2)
Dimensions Weight
Kg.
Speed
1V
m/min
Trolley
82500..
1V
Art. Nr.
Trolley +
Motor
Price €
Relay
box*
1V
Price €
Speed
2V
m/min
Trolley
82500..
2V
Art. Nr.
Trolley +
Motor
Price €
Relay
box*
2V
Price €
Limit
switches
Price €A B C L H W R D E F G N1 3)
1.000 250 22 KN
74~127
1600 80 100 22 255 190
215
123 75 27 80 35 320 17 10
..-01210
5/20
..-01220
127~180 270 ..-01211 ..-01221
190~243 330 ..-01212 ..-01222
254~305 390 ..-01213 ..-01223
2.000 250 22 KN
74~127
1600 80 100 22 255 190
215
123 75 27 80 35 320 17 10
..-02210
5/20
..-02220
127~180 270 ..-02211 ..-02221
190~243 330 ..-02212 ..-02222
254~305 390 ..-02213 ..-02223
3.200 150 33 KN
90~143
2000 100 120 25 300 230
250
144 90 35 100 40 325 27 10
..-03310
5/20
..-03320
149~203 310 ..-03311 ..-03321
203~254 360 ..-03312 ..-03322
251~305 410 ..-03313 ..-03323
5.000 300 52 KN
106~156
2900 125 150 30 375 290
270
174 117 40 120 60 345 45 10
..-05210
5/20
..-05220
160~210 325 ..-05211 ..-05221
210~260 375 ..-05212 ..-05222
255~305 420 ..-05213 ..-05223
6.300 200 64 KN
106~156
2900 125 150 30 375 295
270
174 117 40 120 60 345 50 10
..-06410
5/20
..-06420
160~210 325 ...-06411 ...-06421
210~260 375 ..-06412 ..-06422
255~305 420 ..-06413 ..-06423
8.000 550 84 KN fi xed (119 Min) 3500 160 190 35 450 360 bw+150 220 145 45 145 80 370 105 10 ..-08411 5/20 ..-08421
10.000 600 104 KN fi xed (131 Min) 3500 160 190 35 450 365 bw+150 220 145 45 145 80 420 115 10 ..-10411 5/20 ..-10421
* Relay Box : Terminal box with relay switching set, excl. transformer, excl. terminals, mounted on the trolley. Cable from motor to relaybox included.
Pendant control switch and control cable excluded.
Control voltage 24V or 48V.
Trolleys | Electrical / Geared motor with brake
Technical information:
1) Excl. additional counterweight (if applicable)
2) For curved beams always contact us or your local Agent
- Trolleys suitable for curved beams are executed with
a guide roller set.
- Details to be provided with order.
3) Dimensions for Single speed motor (1V)
4) Max. INP profi le restriction for 22KN = INP360,
33 KN = INP400, 52/64 KN = INP450.
B
N1
A
C
E
W
D
L
HFG
Rbw = beamwidth
Features:
• Capacities 1.000 up to 10.000 Kg
• Helical geared motor with electromagnetic brake
• Trolley with motor and gearbox, without contactor
controls and control box
• Single speeds design app. 10 m/min. in double speed
5 and 20 m/min
• Motor IP54, ISO F, 400/230V - 3 Ph - 50Hz, standard
manufacturers’ surface treatment
• Electric galvanized chassis, suspension bolts and
wheels up to 64 KN model
• Models 84 KN and higher, standard surface
treatment, 2 layer Alkyd paint 80 μm, RAL 7021
Optional:
• Rubber buffers on trolley
• Relay box for trolley drive*
• Integration with electric chain hoist unit
• Necessary counterweight if applicable
• Limit switches, mounted on trolley, excl. cabling
• Straight suspension bolt with spacers or bushings
• Special side plates to increase dimension “E”
• Load test, with certifi cate
• Stainless steel name plates
• Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page 42
of this catalogue for detailed application information
18
Trolleys | Electrical / Articulated
Features:
• Capacities 500-10.000 Kg
• Developed for extreme small curved beams
• Suspension of all types of hoists
• Delivered with motor and gearbox, without contactor
controls and control box
• Single speeds design app. 10 m/min. in double speed
5 and 20 m/min
• Motor IP54, ISO F, 400/230V - 3 Ph - 50Hz, standard
manufacturers’ surface treatment
• Articulated trolley always designed for one specifi c
beam type (non-adjustable)
• Trolley with standard surface treatment, 2 layer
Alkyd paint 80 μm, RAL7021
Optional:
• Rubber buffers on trolley
• Relay box for trolley drive*
• Integration with electric chain hoist unit
• Special constructional design to suit specifi c hoist type
• Limit switches, mounted on trolley, excl. cabling
• Load test, with certifi cate
• Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page
42 of this catalogue for detailed application
information
T
E
B A
C
W
N
L
GD
R
Technical information:
1) Excl. additional counterweight (if applicable)
2) Extreme small beamwidth-combination with Radius,
please contact us or your local agent.
3) Max. INP profi le restriction for 22KN = INP360,
33 KN = INP400, 52/64 KN = INP450.
Trolleys / Electrical / Articulated (Art. group 83300)
Capacity
Kg.
Hoist
Mass
Max.
Kg.
Chassis
Type
beam
width
fi xed
mm.
R(min).
Radius
Beam 2)
mm.
Dimensions Wormgeared
Trolley + motor
83300
Motor + brake
Trolley + motor
1V = 10 m/min
83300
Relay
box*
1V
Motor + brake
Trolley + motor
2V = 5/20 m/min
83300
Relay
box*
2V
Limit
switches
A B C D E G L R T N W
Speed m/min Art. Nr. Price € Art. Nr. Price € Price € Art. Nr. Price € Price € Price €
1.000 250 22 KN fi xed 450 80 100 22 145 20 73 525 350 70 200 bw+270 10 ..-01210 - -
2.000 250 22 KN fi xed 450 80 100 22 152 20 73 525 350 70 200 bw+270 10 ..-01211 - -
3.200 150 33 KN fi xed 500 100 120 25 191 20 73 570 380 70 220 bw+290 10 ..-03310 ..-03315 ..-03321
5.000 300 52 KN fi xed 600 125 150 30 197 26 100 625 400 75 220 bw+295 8 ..-05210 ..-05215 ..-05221
6.300 200 64 KN fi xed 600 125 150 30 214 26 100 675 450 75 220 bw+295 - - ..-06415 ..-06421
8.000 550 84 KN fi xed 800 160 190 35 208 33 130 705 450 80 240 bw+320 - - ..-08415 ..-08421
10.000 600 104 KN fi xed 900 160 190 35 261 33 130 780 500 80 250 bw+330 - - ..-10415 ..-10421
* Relay Box : Terminal box with relay switching set, excl. transformer, excl. terminals, mounted on the trolley. Cable from motor to relaybox included.
Pendant control switch and control cable excluded.
Control voltage 24V or 48V.
bw = beamwidth
19
Trolleys | Electrical / Swinging beam
Trolleys / Electrical / Swinging Beam (Art. group 83100)
Max.
Trolley
Capacity
Kg.
Chassis
Type
Max.
Beam
width
mm.
Suspension
GK...DODimensions Weight
Kg.
Speed
1V
m/min
Trolley
83100
1V
Art. Nr.
Price €
each
Trolley +
Motor
Relay
box*
1V
Price €
Speed
2V
m/min
Trolley
83100
2V
Art. Nr.
Price €
each
Trolley +
Motor
Relay
box*
2V
Price €
Limit
switches
Price €
Mounting
plate
option 2)
Price €A B C L R E S T J N1 N D
2.250 22 KN
113 25
80 100 22 255 123 27 3) 150
120
320 50 75 25 10
..02211
5/20
..02221
210 30 125 ..02212 ..02222
305 35 135 ..02213 ..02223
3.350 33 KN
131 30
100 120 25 300 144 35 3) 175
140
325 60 90 33 10
..-03311
5/20
..-03321
220 35 150 ..-03312 ..-03322
305 40 160 ..-03313 ..-03323
5.300 52 KN
131 35
125 150 30 375 174 40 3) 200
180
345 65 117 50 10
..-05211
5/20
..-05221
210 40 185 ..-05212 ..-05222
310 45 195 ..-05213 ..-05223
6.500 64 KN
106 35
125 150 30 375 174 40 3) 200
180
345 65 117 55 10
..-06411
5/20
..-06421
160 40 185 ..-06412 ..-06422
240 45 195 ..-06413 ..-06423
310 50 205 ..-06414 ..-06424
* Relay Box : Terminal box with relay switching set, excl. transformer, excl. terminals, mounted on the trolley. Cable from motor to relaybox included.
Pendant control switch and control cable excluded.
Control voltage 24V or 48V.
Technical information:
Projecting the right Swinging beam trolley for your crane:
(example)
Safe Working load crane: 1000
Total weight hoist / trolley unit: 75
Total weight crane girder 250/2=: 125 +
Calculated trolley load 1200
---> See Table, trolley type 22 KN
1) For determination of the size of crane girders we refer
to page 64 of this catalogue.
2) Always state your crane girder type, for production of
the suitable mounting plate.
3) Maximum span (S) is 8 meters for all capacities.
4) For cranes with an outreach larger than T (see table)
contact us or your local supplier
5) Max. INP profi le restriction for 22KN = INP360,
33 KN = INP400, 52/64 KN = INP450.
Features:
• Trolley range from 1.100 till 6.500 Kg loading capacity
• Driven by a helical geared motor with electromagnetic
brake
• Smooth running across crane gantry by fl exible
suspension system
• Suspension of crane girder by ball joint
• Material ball joint S355, suitable for welding
• Fixed beam width for specifi ed beam
• Electric galvanized chassis, and wheels
Suspension set with zinc primer + top coat
• Wheel break supports, and anti-tilt device integrated
• Delivered with motor and gearbox, without contactor
controls and control box
• Single speeds design app. 10 m/min. in double speed
5 and 20 m/min
• Motor IP54, ISO F, 400/230V - 3 Ph - 50Hz, standard
manufacturers’ surface treatment
Optional:
• Mounting plate for bolt suspension to crane girder
• Rubber buffers on trolley
• Load test, with certifi cate
• For suitable hoist and trolleys see our other pages
• Switch box with 2 relays for crane drive*
• Limit switches, mounted on trolley, excl. cabling
• Special side plates to increase dimension “E”
CN1N1
N
B A
E
TS
T
L
R
J
D
20
Hoist | Electrical Chain hoist & Combinations I
Features:
• Capacities 500 - 1.000 - 2.000 Kg
• Available as Stationary hoist as well as complete
hoist/trolley unit combined with HD3C Trolley
• Optimized solution, high quality standards combined
in one combopack
• Compact design, very low in weight
• Silent design by gearboxes with helical geared
wheels, smooth and silent chain guiding
• Including chain container
• Integrated slipping clutch, against overload
• Push Trolleys and Geared trolleys adjustable in range
as presented in the table
• Electric Trolleys with double speed motor 5/20
m/min, excl. travel limit switches
• Motors IP55, ISO F, 400 V, 3 Ph 50 Hz
• Control voltage 48 V- with control push button
pendant, suspended from hoist
• Temperature class -10°C….+40°C
Optional:
• Alternative supply voltage
• Power supply to unit by cabling on Festoon system
• Power supply to unit by multi conductor system
• Terminal box for connection to power supply point
• Main switch at the end of power supply line
B3
F1
G
F
H
B
B4
B1
B2
F1
LIF
TG
R
L
C
BA
N
M
F1
LIF
TG
L
R C
B A
MN
Hoist / Electric driven chain hoists & combinations type I (Art. group 89101)
Hoist Hoist + Trolley Hoist + Electric Trolley
Capacity
Kg.
No.
Of
Falls
Lifting
Speed
m/min
FEM
9,511
ISO 4301
Lifting
Height
Standard
Art. No.
89101..
DimensionsTrolley
Type
Beamwidth
min~max
mm
DimensionsTrolley
Type
Beamwidth
min~max
mm
Dimensions
Stationary hoistG A B C N M R L G A B C N M R L
B B1 B2 B3 B4 G F F1 H
500 2/1 4,0 / 1,0 1Am 3 mtrs ..05001 280 327 165 183 140 463 36 26 415 11 KN
55~102
523 60 75 18 165 162 99 190 22 KN
74~127
538 80 100 22 320 162 123 255105~152 127~180
156~203 190~243
207~254 254~305
1.000 2/1 4,0 / 1,0 1Am 3 mtrs ..10001 280 327 165 208 140 463 36 32 415 11 KN
55~102
523 60 75 18 165 162 99 190 22 KN
74~127
538 80 100 22 320 162 123 255105~152 127~180
156~203 190~243
207~254 254~305
2.000 2/1 5,0 / 1,25 1Am 3 mtrs ..20001 310 375 196 271 166 570 52 38 512 22 KN
74~127
645 80 100 22 196 179 123 255 22 KN
74~127
645 80 100 22 320 179 123 255127~180 127~180
190~243 190~243
254~305 254~305
Hoist Hoist Prices € Hoist + Trolley prices € Hoist + Trolley prices €
Capacity
Kg.
No.
Of
Falls
Lifting
Speed
m/min
FEM
9,511
ISO 4301
Lifting
Height
Standard
Art. No.
89101..
Basic
Hoist
Top
Hook
6 mtrs
Lift
Limit switch
Hoisting
Trolley
Type
Beamwidth
min~max
mm
Basic
Unit
Push
Basic
Unit
Geared
6 mtrs
Lift
Towing
arm
power
Trolley
Type
Beamwidth
min~max
mm
Basic
Unit
Electric
6 mtrs
Lift
Travel Limit
Switches
Towing
arm
power
500 2/1 4,0 / 1,0 1Am 3 mtrs ..05001 11 KN
55~102
22 KN
74~127
105~152 127~180
156~203 190~243
207~254 254~305
1.000 2/1 4,0 / 1,0 1Am 3 mtrs ..10001 11 KN
55~102
22 KN
74~127
105~152 127~180
156~203 190~243
207~254 254~305
2.000 2/1 5,0 / 1,25 1Am 3 mtrs ..20001 22 KN
74~127
22 KN
74~127
127~180 127~180
190~243 190~243
254~305 254~305
Stationary Hoist Hoist + Trolley Hoist + Electric Trolley
21
Hoist | Electrical Chain hoist & Combinations II
F1
F
B3
HG
B
B4
B1
B2LI
FT
F1
GR
L
BA
C
N M
LIF
T
F1
G
R
L
C
AB
N M
Hoist / Electric driven chain hoists & combinations type II (Art. group 89101)
Hoist Hoist + Trolley Hoist + Electric Trolley
Capacity
Kg.
No.
Of
Falls
Lifting
Speed
m/min
FEM
9,511
ISO 4301
Lifting
Height
Standard
Art. No.
89101..
DimensionsTrolley
Type
Beamwidth
min~max
mm
DimensionsTrolley
Type
Beamwidth
min~max
mm
Dimensions
Stationary hoistG A B C N M R L G A B C N M R L
B B1 B2 B3 B4 G F F1 H
3.200 2/1 4,0 / 1,0 1Bm 3 mtrs ..32001 304 496 315 240 158 517 36 33 699 33 KN
90~143
607 100 120 25 315 181 144 300 33 KN
90~143
607 100 120 25 325 181 144 300149~203 149~203
203~254 203~254
251~305 251~305
5.000 2/1 4,0 / 1,0 1Am 3 mtrs ..50001 349 522 316 312 154 643 41 41 711 52 KN
106~156
760 125 150 30 316 206 174 375 52 KN
106~156
760 125 150 30 345 206 174 375160~210 160~210
210~260 210~260
255~305 255~305
6.300 2/1 3,2 / 0,75 1Bm 3 mtrs ..63001 349 522 316 312 154 643 41 41 711 64 KN
106~156
760 125 150 30 316 206 174 375 64 KN
106~156
760 125 150 30 345 206 174 375160~210 160~210
210~260 210~260
255~305 255~305
Hoist Hoist Prices € Hoist + Trolley prices € Hoist + Electric trolley prices €
Capacity
Kg.
No.
Of
Falls
Lifting
Speed
m/min
FEM
9,511
ISO 4301
Lifting
Height
Standard
Art. No.
89101..
Basic
Hoist
Top
Hook
6 mtrs
Lift
Limit switch
Hoisting
Trolley
Type
Beamwidth
min~max
mm
Basic
Unit
Push
Basic
Unit
Geared
6 mtrs
Lift
Towing
arm
power
Trolley
Type
Beamwidth
min~max
mm
Basic
Unit
Electric
6 mtrs
Lift
Travel Limit
Switches
Towing
arm
power
3.200 2/1 4,0 / 1,0 1Bm 3 mtrs ..32001 33 KN
90~143
33 KN
90~143
149~203 149~203
203~254 203~254
251~305 251~305
5.000 2/1 4,0 / 1,0 1Am 3 mtrs ..50001 52 KN
106~156
52 KN
106~156
160~210 160~210
210~260 210~260
255~305 255~305
6.300 2/13,2 /
0,751Bm 3 mtrs ..63001 64 KN
106~156
64 KN
106~156
160~210 160~210
210~260 210~260
255~305 255~305
Features:
• Capacities 3.200 - 5.000 - 6.300 Kg
• Available as Stationary hoist as well as complete
hoist/trolley unit combined with HD3C Trolley
• Optimized solution, high quality standards combined
in one combopack
• Compact design, very low in weight
• Silent design by gearboxes with helical geared
wheels, smooth and silent chain guiding
• Including chain container
• Integrated slipping clutch, against overload
• Electric Trolleys with double speed motor 5/20 m/
min, excl. travel limit switches
• Motors IP55, ISO F, 400 V, 3 Ph 50 Hz
• Control voltage 48 V, with control push button
pendant, suspended from hoist
• Temperature class -20°C….+40°C
Optional:
• Alternative supply voltage
• Power supply to unit by cabling on Festoon system
• Power supply to unit by multi conductor system
• Terminal box for connection to power supply point
• Main switch at the end of power supply line
• IP56/66 protection for motors
• Special paint system for maritime application
• Stainless steel load chain (reduced capacity)
Stationary Hoist Hoist + Trolley Hoist + Electric Trolley
22
Cranes | Hand operated / Swinging beam cranes
Features:
• Capacities 500 Kg - 3.200 Kg
• Smooth running across crane gantry by its fl exible
suspension system
• Suspension of crane girder by ball joint, which is
welded to the crane girder
• Electric galvanized trolley chassis, suspension bolts
and wheels
• Wheel break supports and anti-tilt device integrated
• Crane girder Surface protection Shot blasting +
primer + top coat in RAL1007
• S.W.L. Sticker
Optional:
• As loose kit components, to be assembled, trolleys
delivered with mounting plates
• If welding is not possible, crane girder can be bolted
to trolleys
• Rubber buffers on trolleys
• Special surface treatment
• For suitable hoist and trolleys see our other catalogue
pages
• Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page 42
of this catalogue for detailed application information
A B
C
N
TST L
R
E
Technical information:
1) Pre-selected crane girder for max. span width.
(Defl ection 1/750 of S)
2) Maximum span (S) is 8 meters for all capacities.
3) For cranes with an outreach larger than T (see table)
contact us or your local supplier
4) Crane gantry size to be specifi ed with order
Cranes / Hand operated / Swinging beam cranes (Art. group 86000)
Crane
Capacity
Kg
Span
S
2)
mm
T
3)
mm
Hoist Trolley
mass
Kg.
Trolley
type
Crane
Girder
1)
Dimensions Mass.
Excl.
Hoist/trolley
Kg
Crane
Gantry
Beam Size 4)
Crane
86000
Art. Nr.
Crane
Price €A B C E L R N
500
3.400
125 100 11KN
IPE140
60 75 18 20 190 99 40
60
@
..011001
4.400 IPE160 90 ..011002
5.600 IPE180 130 ..011003
6.700 IPE200 170 ..011004
7.700 IPE220 230 ..011005
8.000 IPE240 270 ..011006
1.000
3.300
150 120 22KN
IPE180
80 100 22 27 255 123 50
100
@
..022001
4.900 IPE200 140 ..022002
5.900 IPE220 190 ..022003
6.900 IPE240 250 ..022004
8.000 IPE270 330 ..022005
2.000
3.100
175 250 33KN
IPE240
100 120 25 35 300 144 60
150
@
..033001
4.500 IPE270 220 ..033002
6.300 IPE300 320 ..033003
8.000 IPE330 450 ..033004
3.200
4.800
200 150 52KN
HEB220
125 150 30 40 375 174 65
430
@
..052001
6.000 HEB240 590 ..052002
8.000 HEB260 850 ..052003
@ = on request
23
Cranes | Hand operated / Underslung crane
Features:
• Van Leusden underslung cranes are available as
complete cranes and as crane kits for self-construction
• Solid steel single fl ange wheels, suitable for all kinds
of crane gantries
• Low pull force on the chain makes the crane easy to
drive
• The cranes are of low maintenance type en have
limited wear and tear parts
• The cranes delivered complete with: Manual geared
drive, Control height 3 m, control chain, Surface
protection Shot blasting + primer + top coat in
RAL1007, S.W.L. Sticker, Users manual
• Crane kits for crane-constructors: A complete set of
wheel boxes, with transversal shaft, bearing blocks,
hand chain wheel, hand chain, accompanied by a
dimensional sketch. Shot blasted + primer, Basic
welding execution, Crane girder to be welded to the
wheelboxes, Crane girder to be provided by
crane-constructor
Optional:
• Wheel boxes with screw fi ttings to the crane girder.
• Higher capacities, double girder cranes, low
headroom types
• Special surface treatment
• For suitable Hoist and Trolley units see our other
catalogue pages
Detail: Y
Detail: X
Y
X
S+500
M
S
H
BA
2
LR
B+4mm
Technical information:
1) Max. Girder defl ection 1/600 of span.
Mentioned values are for complete
manual driven cranes.
2) Values mentioned between (....) are
corresponding a girder defl ection of
1/750 of span. This value shall be
used for cranes with electric driven
hoist and trolley or crane travel
motions.
3) Maximum INP Gantry for: ø 80/100S
= INP 360, ø 125/150S = INP 450
Cranes / Hand operated / Underslung crane (Art. group 86000)
S.W.L.
Kg.
S
m 1) 2)
R
mm
L
mm
Wheels
mm
A2
mm
Max. Weight.
Hoist+Trolley
Kg
Max.
Wheelbox load
KN
Handchain
Force
Kg
Crane
86200..
Art. Nr.
Price Crane
Excl. €
Hoist/Trolley
Crane Kit
86250..
Art. Nr.
Price Crane kit
€
Screw Fittings
Boltset incl.
€
500
- 4.10 (- 3.70) 800 1005 80/100S 150
100
7.0 10 ..05001 ..-05001
- 5.25 (- 4.75) 800 1005 80/100S 170 7.6 10 ..05002 ..05002
- 6.75 (- 6.00) 800 1005 80/100S 190 7.7 10 ..05003 ..05003
- 8.25 (- 7.40) 1000 1205 80/100S 210 8.1 11 ..05004 ..05004
1.000
- 3.95 (- 3.55) 800 1005 80/100S 170
105
12.3 15 ..10001 ..10001
- 5.00 (- 4.50) 800 1005 80/100S 190 12.4 15 ..10002 ..10002
- 6.00 (- 5.50) 800 1005 80/100S 210 12.5 15 ..10003 ..10003
- 7.50 (- 6.70) 1000 1205 80/100S 230 13.2 17 ..10004 ..10004
- 9.10 (- 8.10) 1200 1405 80/100S 250 14.1 20 ..10005 ..10005
2.000
- 3.40 (- 3.10) 800 1005 80/100S 170
150
22.3 19 ..20001 ..20001
- 5.75 (- 5.75) 800 1005 80/100S 250 23.4 21 ..20002 ..20002
- 7.75 (- 7.00) 1000 1205 80/100S 270 24.4 23 ..20003 ..20003
- 9.10 (- 8.10) 1200 1405 80/100S 290 25.6 24 ..20004 ..20004
3.200
- 5.50 (- 4.90) 800 1075 125/150S 230
175
33.8 21 ..32001 ..32001
- 6.50 (- 5.90) 1000 1275 125/150S 250 34.7 23 ..32002 ..32002
- 9.50 (- 8.80) 1400 1675 125/150S 330 36.8 25 ..32003 ..32003
- 11.00 (- 9.90) 1400 1675 125/150S 350 38.0 27 ..32004 ..32004
5.000
- 5.00 (- 5.00) 800 1075 125/150S 270
225
54.3 26 ..50001 ..50001
- 6.25 (- 6.25) 800 1075 125/150S 290 55.4 27 ..50002 ..50002
- 9.20 (- 9.20) 1200 1475 125/150S 390 58.1 30 ..50003 ..50003
24
Cranes | Hand operated / Overhead crane
Features:
• Van Leusden overhead cranes are available as comple-
te cranes and as crane kits for self-construction
• Solid steel double fl ange wheels, suitable for fl at rails
50/30 mm
• Low pull force on the chain makes the crane easy
to drive
• The cranes are of low maintenance type en have
limited wear and tear parts
• The cranes delivered complete with: Manual geared
drive, Control height 3 m, control chain, Surface
protection Shot blasting + primer + top coat in
RAL1007, S.W.L. Sticker, Users manual
• Crane kits for crane-constructors: A complete set of
wheel boxes, with transversal shaft, bearing blocks,
hand chain wheel, hand chain, accompanied by a
dimensional sketch. Shot blasted + primer, Basic
welding execution, Crane girder to be welded to the
wheelboxes, Crane girder to be provided by
crane-constructor
Optional:
• Wheel boxes with screw fi ttings to the crane girder.
• Higher capacities, double girder cranes, low
headroom types
• Special surface treatment
• For suitable Hoist and Trolley units see our other
catalogue pages
X-XX
X
M
S+150
S
W
V
LR
A
B
H
B1
B2
A1
H
A2
Technical information:
1) Max. Girder defl ection 1/600 of span.
Mentioned values are for complete
manual driven cranes.
2) Values mentioned between (....) are
corresponding a girder defl ection of
1/750 of span. This value shall be
used for cranes with electric driven
hoist and trolley or crane travel
motions.
3) Specify A or B type crane with order.
Cranes / Hand operated / Overhead crane (Art. group 86000)
S.W.L.
Kg.
S
m 1) 2)
R
mm
L
mm
Wheels
mm
A1
mm
A2
mm
B1
mm
B2
mm
Max. Weight.
Hoist+Trolley
Kg
Max.
Wheelload
[kN]
Handchain
Force
Kg
Crane
86100..
Art. Nr.
Price Crane
Excl. €
Hoist/Trolley
Crane Kit
86150..
Art. Nr.
Price
Crane kit
€
Screw
Fittings
Boltset incl.
€
500
- 4.10 (- 3.70) 800 1090 125/150 196 21 346 171
100
3.4 10 ..05001 ..-05001
- 5.25 (- 4.75) 800 1090 125/150 196 21 346 171 3.8 10 ..05002 ..05002
- 6.75 (- 6.00) 800 1090 125/150 215 22 365 172 3.9 10 ..05003 ..05003
- 8.25 (- 7.40) 1000 1290 125/150 234 22 384 172 4.0 11 ..05004 ..05004
1.000
- 3.95 (- 3.55) 800 1090 125/150 215 22 365 172
105
6.0 15 ..10001 ..10001
- 5.00 (- 4.50) 800 1090 125/150 215 22 365 172 6.1 15 ..10002 ..10002
- 6.00 (- 5.50) 800 1090 125/150 234 22 384 172 6.3 15 ..10003 ..10003
- 7.50 (- 6.70) 1000 1290 125/150 253 23 403 173 6.5 17 ..10004 ..10004
- 9.10 (- 8.10) 1200 1490 125/150 273 24 423 174 6.9 20 ..10005 ..10005
2.000
- 3.40 (- 3.10) 800 1090 125/150 203 25 353 175
150
11.1 19 ..20001 ..20001
- 5.75 (- 5.75) 800 1090 125/150 273 24 423 174 11.5 21 ..20002 ..20002
- 7.75 (- 7.00) 1000 1290 125/150 293 25 443 175 12.0 23 ..20003 ..20003
- 9.10 (- 8.10) 1200 1490 125/150 313 25 463 175 12.6 24 ..20004 ..20004
3.200
- 5.50 (- 4.90) 800 1090 125/150 263 28 413 178
175
16.8 21 ..32001 ..32001
- 6.50 (- 5.90) 1000 1290 125/150 283 29 433 179 17.2 23 ..32002 ..32002
- 9.50 (- 8.80) 1400 1690 125/150 353 27 503 177 18.2 25 ..32003 ..32003
- 11.00 (- 9.90) 1400 1690 125/150 373 28 523 178 18.8 27 ..32004 ..32004
5.000
- 5.00 (- 5.00) 800 1130 160/180 305 32 505 232
225
27.1 26 ..50001 ..50001
- 6.25 (- 6.25) 800 1130 160/180 325 33 525 233 27.5 27 ..50002 ..50002
- 9.20 (- 9.20) 1200 1530 160/180 415 33 615 233 29.9 30 ..50003 ..50003
25
Components | Wheels / Single fl ange
d1
d/M
2
b
b1 b2
6°
D1D
L2 L3
L1
a
L
d1 d/M
b
b1 b2
6°
D D1
2 a
L2 L3
L1
L
FF
Fig.1. Fig.2.Technical information:
Do you need a special design or replacement for an
existing Construction ? Feel free to contact us for more
information. Technical assistance will be provided to
fi nd a correct solution for your specifi c needs.
Features:
• Capacities from 150 - 6.400 Kg
• Heavy duty single fl ange wheels available from our
trolley program, steel C45
• Fully enclosed 2RS bearings, life time lubricated
• Number of bearings: 1 off (Fig. 1) or 2 off (Fig. 2)
• Electric galvanized up till 125/150 model (Fig. 1)
• For fl at and angular beam fl anges
• Available for manual and motor driven trolleys and
cranes
Optional:
• Also available in stainless steel, Aluminum Bronze
CUAL10NI
• Other materials on request
• High temperature executions
• Custom built wheels for replacement or special
applications
• Drive pinions and other components available on
request
Components / Wheels / Single Flange (Art. group 85400)
Max.
Load.
KN
D D1 d/M d1 b b1 b2 a L L1
L2
L3 m ZBearing
2RS
Bearing - KN Fn
N/KN
Mass.
Kg.
Push
85400..
Art. Nr.
Push
Price €
Geared
85400..
Art. Nr.
Geared
Price €
Shaft
85400..
Art. Nr.
Shaft
Price €Min. Max.
Cr.
Dyn.
Co.
Stat.
FIG. 1
1.5 45 60 10 15 20 5 15 13,5 43 21 4 10 9.5 - - 1x6000 3.5 2.0 32 0.3 ..00601 - ..00603
3 60 75 12 20 25 7 18 16 52 25 6 12 10.5 3 23 1x6202 5.9 3.5 25 0.6 ..01101 ..01102 ..01103
6 80 100 16 25 30 8 22 18 64 32 8 15 11 3 31 1x6204 9.8 6.2 20 1.2 ..02201 ..02202 ..02203
9 100 120 20 35 35 10 25 21 76 39 10 18 13 3 38 1x6206 15.0 10.0 17 2.1 ..03301 ..03302 ..03303
13 125 150 24 40 40 10 30 24 87 45 12 20 15.5 3 48 1x6207 19.7 13.6 14 3.5 ..05201 ..05202 ..05203
FIG. 2
8 80S 100 16 25 30 8 22 18 68 36 10 20 4 3 31 2x6203 14.7 8.8 20 1.3 ..03201 ..03202 ..03203
16 125S 150 24 40 40 10 30 24 92 50 15 25 4 3 48 2x6206 30.0 20.0 14 4.0 ..06401 ..06402 ..06403
26 160 190 30 45 50 15 35 27,5 112 60 20 30 7 4 45 2x6207 39.4 27.2 11 9.0 ..10401 ..10402 ..10403
31 160S 190 30 45 50 15 35 27,5 112 60 20 30 7 4 45 2x6208 50.2 35.6 11 9.5 ..12401 ..12402 ..12403
51 200 240 36 55 70 20 50 38,5 147 75 25 35 9 4 58 2x6309 74.2 52.6 9 17 ..16401 ..16402 ..16403
64 200S 240 36 60 70 20 50 38,5 152 80 30 40 9 4 58 2x6310 95.0 71.4 9 17.5 ..25401 ..25402 ..25403
26
Components | Wheels / Double fl ange
Features:
• Capacities from 1.500 - 12.500 Kg
• Heavy duty double fl ange wheels, steel C45
• Diameters up to 500 mm
• Fully enclosed 2RS bearings, life time lubricated
• Wheel shafts delivered as loose item, also in special
dimensions possible
• Available for manual and motor driven trolleys and
cranes
• Standard for 30/20, 50/30 or 60/40 crane rails
available see table
Optional:
• Wheel shaft with fasteners, for application in
constructions, different plate size and thickness.
• Execution with cone clamp or nut key
• Also available in stainless steel, Aluminium Bronze
CUAL10NI
• Other materials on request
• Drive pinions for motor and manual drive
• Custom built wheels for replacement or special
applications
D1 D d
G GF
E
E + 50 mm. H
D1D
G OF
L
L + 50 mm. H
6° Technical information:
Do you need a special design or replacement for an
existing Construction ? Feel free to contact us for more
information. Technical assistance will be provided to
fi nd a correct solution for your specifi c needs.
Components / Wheels / Double fl ange (Art. Group 85600)
Push + Handgeared Double Flange
D
mm
D1
mm
S-355
Rails
d m - z Ro. KN
Nom
2 x 2RS
Bearing
Fn
N / KN
E F G L O H
Push
85600..
Geared
Manual
85600..
Shaft
85600..
Art. Nr Price € Art. Nr Price € Art. Nr Price €
125 150 30 / 20 35 3 - 48 26 6207 16 60 37 11.5 - - 15 ..12530 ..12531 ..03500
125 150 50 / 30 35 3 - 48 36 6307 16 80 57 11,5 - - 15 ..12550 ..12551 ..03501
160 180 50 / 30 40 3 - 58 45 6308 12 80 57 11,5 - - 15 ..16050 ..16051 ..04000
200 220 50 / 30 45 3 - 70 53 6309 9 80 57 11,5 - - 15 ..20050 ..20051 ..04500
Motor driven, Electric, Pneumatic, Hydraulic
D
mm
D1
mm
S-355
Rails
d m - z Nom. Ro. 2 x 2RS
Bearing
Fn
N / KN
E F G L O H
Push
85600..
Geared Motor
85600..
Shaft
85600..KN
V20-25%
KN
V40-40% Art. Nr Price € Art. Nr Price € Art. Nr Price €
125 150 30 / 20 35 3 - 48 22 17 6207 16 60 37 11,5 80 31,5 15 ..12530 ..12533 ..03500
125 150 50 / 30 35 3 - 48 32 25 6307 16 80 57 11,5 100 31,5 15 ..12550 ..12553 ..03501
160 180 50 / 30 40 3 - 58 42 34 6308 12 80 57 11,5 100 31,5 15 ..16050 ..16053 ..04000
200 220 50 / 30 45 3 - 70 53 44 6309 9 80 57 11,5 100 31,5 15 ..20050 ..20053 ..04500
250 272 50 / 30 50 4 - 66 70 57 6310 7 80 57 11,5 110 41,5 15 ..25050 ..25050 ..05000
315 348 50 / 30 55 4 - 85 90 76 6311 6 90 60 15 120 45 15 ..31550 ..31553 ..05500
400 432 50 / 30 60 4 - 106 104 99 6312 5 90 60 15 120 45 15 ..40050 ..40053 ..06000
500 540 60 / 40 70 6 - 88 136 136 6314 4 100 70 15 150 65 20 ..50060 ..50063 ..07000
@ = on request
27
Components | Hand chain wheels / Pinions
Features:
Hand chain Wheels :
• Diameters from 100- 300 mm
• Standard execution suitable for hand chain 5 x 18.5 mm.
• According to DIN 766 A
Pinions;
• For manual geared or motor driven trolleys.
• Standard in C45 material
• Pinions loose supplied
Optional:
Hand Chain Wheels:
• Other shaft diameters and connections
• Non-sparking executions
Pinions:
• In bronze material available
• Other shaft diameters and connections
• Non-sparking executions
• Other number of teeth and modul available
• Shafts, bearings and other drive components on
request
A-A
A
A
E
Dd
B
C
FNest
Sprocket
B-B
B
B
dZ
M
L
K
H
Dst
c.
Technical information:
Hand Chain wheels:
Diameter ø135 / ø195 Electric galvanized.
Diameter ø270 / ø300 / ø380 Blank steel.
Pinions:
Manual drive, material C45 not heat treated.
Motor drive, material C45, heat treated, oil hardened.
Pinions Manual drive (Art. Group 85600)
M Z Dst Shaft
ø d
mm
K
mm
L
mm
H
ø
mm
E
mm
Pinion
85620..
Art. Nr. Price €
3 9 30 15 H 7 12 20 5 - ..30901
4 9 40 20 H 7 22 32 6 - ..40901
Pinions Motor drive (Art. Group 85600)
F G
3 13 42 16 H 7 20 28 - 5 ..31301
3 16 48 16 H 7 20 28 - 5 ..31601
4 13 56 20 H 7 28 38 - 6 ..41301
Handchainwheel (Art. Group 85600)
Diameter
ø D nest
Dst ø
Chain
mm
Shaft
ø d
mm
Material
Aluminium
Chain
DIN 766 A
B
mm
C
mm
E
mm
F
mm85630..
Art. Nr. Price €
100 7 82,6 15 H 7 Aluminium
5 x 18,5
28 38 5 - ..10000
100 7 82,6 15 H 7 Bronze 28 38 5 - ..10001
135 9 106,2 15 H 7 Steel 35 45 6 - ..10002
195 14 165,2 20 H 7 Steel 35 45 6 - ..10003
270 20 236 20 H 7 Steel 35 45 7 - ..10005
300 24 283,2 20 H 7 G.Y. 25.00 35 50 7 - ..10004
380 30 354 20 H 7 G.Y. 25.00 35 60 7 - ..10006
Manual Drive
C-C
C
C
Z
M
d
G
F
E
Dst
c.
Motor Drive
28
Options
Options / Industry Heavy Duty
Rubber buffers on trolley.
• 6-11-22-33 KN
• 52-64 KN
• 84-124 KN
• 164-254 KN
• Tag plate according to customers specifi cation and layout, brass type.
• Tag plate according to customers specifi cation and layout, Stainless steel type.
Parking device, with parking pin.
• 11-22 KN
• 33-64 KN
• 84-124 KN
• 164-254 KN
Parking device with hand chain operated parking spindle.
• 11-22 KN
• 33-64 KN
• 84-124 KN
2929
This page presents an overview of our options. Many more other options are available.
Should you have any special request which is not mentioned in this catalogue, please feel free to
contact us. We will help you fi nding your specifi c solution.
Sh ld h i l t hi h i t ti d i thi t l l f l f t
• Extension of hand chain drive system, M=300 mm max.
• Fixed suspension for special customers hoist.
Beam clamping device, hand chain operated, clamping the trolley to the beam.
• 11-22 KN
• 33-64 KN
• 84-124 KN
• Static load test of the trolley 150% of SWL, incl. manufacturers certifi cate.
Non Corrosive treatments, special surface protection for aggressive environments, outdoor applications, offshore &
marine environments. Reference is made to page 42 of this catalogue for detailed application information.
30
Maritime & Offshore
Our broad experience in the maritime and offshore market resulted in a fi ne tuned range
of products and solutions for this sector.
You will fi nd the best product designs for your application in maritime as well as off-
shore environments.
We have solutions for every kind of operation, from standard, rack and pinion, low
headroom, ultra headroom and many more options. Our products contain both manual
and electric driven solutions. Other types of drive mechanism are always possible.
Especially our Non corrosive products enable you to give a product a much longer life-
time and safe operation. Especially in offshore environments corrosion protection is an
important issue. We can extend the lifetime of trolleys and hoists by applying a special
system for protection.
For protection of equipment for sudden movements and making sure that operation is
safe on board of seagoing vessels we have a range of different solutions available.
We have solutions for every kind of operation
3131
All equipment is designed according to the EC machinery directive and the designated European
standards with applicable declaration of conformity.
Should you have any special request which is not mentioned in this catalogue, please feel free to
contact us. We will help you fi nding your specifi c solution.
Simple parking pin, single side parking
device, double sided parking device.
Rack and pinion driven solution, till a
large angle of inclination. (Also for curved
tracks). Friction wheel drive systems
allowing drive at angles and curves in
extreme conditions.
In projects we build special rack and
pinion driven cranes for Enginerooms,
pumprooms, compressor rooms, etc. You
can buy your complete programme of
lifting equipment for your vessel or plant
at our factory. We will help you fi nding
the right solution and offer you a complete
‘one stop’ investment solution.
Please refer to the special information
page in this chapter for detailed descrip-
tions.
Trolleys
Push & geared / Standard type 32
Hoist-Trolley units Hand driven / Standard 33
Hand driven / Low headroom 34
Hand driven / Ultra low headroom 35
Trolleys Hand driven / Rack & pinion type 37
Hoist-Trolley units Hand driven / Rack & pinion type 38
Trolleys Electrical / Rack & pinion type 39
Hoist-Trolley units Electrical rack & pinion drive Type I 40
Electrical rack & pinion drive Type II 41
Non Corrosive Treatmens Protection against corrosion 42
32
Trolleys | Push & geared / Standard type
Features:
• Capacities 500-25.000 Kg
• Unique 3 bolts design, safety & stability
• Long life time, low operational costs
• Suspension of all types of hoists
• Suitable for all types of beams
• Electric galvanized chassis, suspension bolts and
wheels up to 64 KN model
• Models 84 KN and higher, standard surface
treatment, 2 layer Alkyd paint 80 μm, RAL7021
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
Optional:
• Fixed beam execution
• Straight suspension bolt with spacers
• Extra suspension set for other beam range
• Rubber buffers on trolley
• Extended chain wheel drive, M=...mm (max. 300 mm)
• Special side plates to increase dimension “E”
• Stainless steel name plates
• Load test, with certifi cate.
• Parking/Fixing device preventing the trolley for
uncontrolled movements, handchain controlled.
Safe and sure operation during light ship movements.
See table for option price
N L
R
C
AB
E HFG
W
O
D
M
Technical information:
1) * Mass plain type
** Mass Geared type, excl. hand chain 1 mtr Lift = 1 Kg.
2) For curved beams always contact us or your local Agent
3) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
4) Max. INP profi le restriction for 6 KN = INP220,
11KN = INP300, 22KN = INP360, 33 KN = INP400,
52/64 KN = INP450.
Trolleys / Push & Geared / Standard type (Art. group 81000-81200)
Capacity
Kg.
Hoist
Mass
Max.
Kg.
Chassis
Type
Adjustable
beam width
min~max
mm. 4)
R(min).
Radius
Beam
2)
mm.
DimensionsChain
Pull
Max.
Kg.
Weight
Kg.
1)
*-**
Push
81000..
Art.Nr.
Push
Price €
Geared
81200..
Art.Nr.
Geared
excl.
Hand-
chain
Price €
Galvanized
Handchain
Control
lenght
Price / m €
Stainless
Handchain
Control
length
Price / m €
Parking
Device
Handchain
controlled
Price / m €
Non Corro-
sive Offshore
protection
>200 μm
Price €
A B C L H W R D E F G N M O
500 100 6 KN55~102
1000 45 60 15 150 125160
75 52 15 45 30 - - - - 3..-00600 -/-
105~152 210 ..-00601 -/-
1.000 120 11 KN
55~102
1500 60 75 18 190 160
175
99 60 20 60 30 65 90 100 10 5-6
..-01100 ..-01100
105~152 225 ..-01101 ..-01101
156~203 275 ..-01102 ..-01102
207~254 325 ..-01103 ..-01103
2.000 250 22 KN
74~127
1600 80 100 22 255 205
215
123 75 27 80 35 65 90 100 16 11-12
..-02200 ..-02200
127~180 270 ..-02201 ..-02201
190~243 330 ..-02202 ..-02202
254~305 390 ..-02203 ..-02203
3.200 150 33 KN
90~143
2000 100 120 25 300 245
250
144 90 35 100 40 70 95 100 20 18-19
..-03300 ..-03300
149~203 310 ..-03301 ..-03301
203~254 360 ..-03302 ..-03302
241~305 410 ..-03303 ..-03303
5.000 300 52 KN
106~156
2900 125 150 30 375 305
270
174 117 40 120 60 100 130 135 20 31-32
..-05200 ..-05200
160~210 325 ..-05201 ..-05201
210~260 375 ..-05202 ..-05202
255~305 420 ..-05203 ..-05203
6.300 200 64 KN
106~156
2900 125 150 30 375 310
270
174 117 40 120 60 100 130 135 25 33-34
..-06400 ..-06400
160~210 325 ..-06401 ..-06401
210~260 375 ..-06402 ..-06402
255~305 420 ..-06403 ..-06403
8.000 550 84 KN fi xed (119 Min)
3500
160 190 35 450 365 bw+150 220 145 45 145 80 105 130 270 16 85-90 ..-08401 ..-08401
10.000 600 104 KN fi xed (131 Min) 160 190 35 450 370 bw+150 220 145 45 145 80 105 130 270 19 90-95 ..-10401 ..-10401
12.500 150 124 KN fi xed (143 Min) 160 190 35 450 370 bw+150 220 145 45 145 80 105 130 270 23 95-100 ..-12401 ..-12401
16.000 700 164 KN fi xed (155 Min)
5500
200 240 50 550 445 bw+185 272 165 42 165 100 135 170 300 20 135-145 ..-16401 ..-16401
20.000 800 204 KN fi xed (170 Min) 200 240 50 550 450 bw+185 272 165 42 165 100 135 170 300 25 140-150 ..-20401 ..-20401
25.000 900 254 KN fi xed (185 Min) 200 240 50 550 455 bw+195 272 165 42 165 100 135 170 380 25 150-160 ..-25401 ..-25401
max. beamwidth
min. beamwidth
bw = beamwidth
33
Hoist-Trolley units | Hand driven / Standard
F1
F
N
LIF
TG
E
B A O
R
L
n
CTechnical information:
For detailed technical information about hoist and trolley
please refer to the individual pages for these products.
For trolleys : Page 32 / For manual hoist : Page 11
1) For curved beams always contact us or your local Agent
2) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
3) Max. INP profi le restriction for 6 KN = INP220,
11KN = INP300, 22KN = INP360, 33 KN = INP400,
52/64 KN = INP450.
Features:
• Capacities 500-25.000 Kg in standard headroom
execution
• Advantages and high quality combined in one combo
pack unit
• Low in weight, compact headroom
• Low pulling force on the hand chain
• Standard adjustable fl ange width in different ranges
• Electric galvanized trolley chassis, suspension bolts
and wheels up to 64 KN model
• Hoist unit powder coating, orange colour RAL2008
• Trolley model 104 KN and higher standard surface
treatment, 2 layer Alkyd paint 80 μm, RAL 7021
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
• Suitable for all types of beams
Optional:
• Stainless steel name plate
• Rubber buffers
• Load test, with certifi cate
• Overload protection (See page 11)
• Stainless Steel load chain, available on request.
(reduced capacity)
• Parking/Fixing device preventing the trolley for
uncontrolled movements, handchain controlled
Safe and sure operation during light ship movements.
See table for option price
Hoist-Trolley units / Hand driven / Standard type (Art. group 81250/81255)
Capacity
Kg.
Head
Room
G
mm.
No. off
Falls
Trolley
Chassis
Type
Adjustable
beam widht
min~max
mm.
R(min).
Radius
Beam
mm.
DimensionsWeight
Kg.
3 mtr
Hoist / trolley
Push (3 mtrs)
81250..
Hoist / trolley
Geared (3 mtrs)
81255..
Hoist
Loadchain
Lifting
height
Price / m €
Hoist &
trolley
Handchain
controlled
Price / m €
Parking
Device
Handchain
controlled
Price €
Non Corrosive
Offshore
protection
>200 μm
Price €Art. Nr. Price € Art. Nr. Price €A B C E F F1 R L N O n
500 315 1 6 KN55~102
1000 45 60 15 15 30 24 75 150 - - - 11..-00600 -
105~152 ..-00601 -
1.000 360 1 11 KN
55~102
1500 60 75 18 20 36 29 99 190 90 100 2.5m 20
..-01100 ..-01100
105~152 ..-01101 ..-01101
156~203 ..-01102 ..-01102
207~254 ..-01103 ..-01103
1.600 420 1 22 KN
74~127
1600 80 100 22 27 39 31 123 255 90 100 2.5m 30
..-01600 ..-01600
127~180 ..-01601 ..-01601
190~243 ..-01602 ..-01602
254~305 ..-01603 ..-01603
2.000 455 1 22 KN
74~127
1600 80 100 22 27 42 34 123 255 90 100 2.5m 36
..-02200 ..-02200
127~180 ..-02201 ..-02201
190~243 ..-02202 ..-02202
254~305 ..-02203 ..-02203
3.200 525 1 33 KN
90~143
2000 100 120 25 35 48 39 144 300 95 100 2.5m 53
..-03300 ..-03300
149~203 ..-03301 ..-03301
203~254 ..-03302 ..-03302
251~305 ..-03303 ..-03303
5.000 690 3 52 KN
106~156
2900 125 150 30 40 56 47 174 375 130 135 2.5m 70
..-05200 ..-05200
160~210 ..-05201 ..-05201
210~260 ..-05202 ..-05202
255~305 ..-05203 ..-05203
10.000 935 3 104KN fi xed (131 Min) 3500 160 190 35 45 75 68 220 450 135 270 2.5m 175 ..-10401 ..-10401
16.000 1185 5 164 KN fi xed (155 Min)
5500
200 240 50 42 90 81 272 560 155 300 2.5m 305 ..-16401 ..-16401
20.000 1205 6 204 KN fi xed (170 Min) 200 240 50 42 90 81 272 560 155 300 2.5m 415 ..-20401 ..-20401
25.000 1265 8 254 KN fi xed (185 Min) 200 240 50 42 90 81 272 570 170 380 2.5m 495 ..-25401 ..-25401
34
Hoist-Trolley units | Hand driven / Low headroom
Features:
• Capacities 500-5.000 Kg in low headroom execution
• Suitable for narrow spaces and low headroom
applications
• Low in weight, compact design
• Low pulling force on the hand chain
• The hoist has double safety pawl, safe and sure brakes
• Trolley manufactured for fi xed beamwidth in different
ranges
• Trolley standard surface treatment, 2 layer Alkyd
paint 80 μm, orange colour RAL2008
• Hoist unit powder coating, orange colour RAL2008
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
Optional:
• Stainless Steel nameplate
• Rubber buffers on trolley
• Load test, with certifi cate
• Overload protection
• Stainless Steel load chain, available on request.
(reduced capacity)
• Parking/Fixing device preventing the trolley for
uncontrolled movements, handchain controlled.
Safe and sure operation during light ship movements.
See table for option price.
OB A
N
LIF
TG
C
F1
F
M
T
n
R
L Technical information:
1) For curved beams always contact us or your local Agent
2) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
3) Max. INP profi le restriction for 6 KN = INP220,
11KN = INP300, 22KN = INP360, 33 KN = INP400,
52/64 KN = INP450.
Hoist-Trolley units / Hand driven / Low Headroom (Art. group 81300-81400)
Capacity
Kg.
Head
Room
G
mm
No.
off
Falls
Trolley
Chassis
Type
Fixed for
beam
width in
range
mm.
DimensionsWeight
Kg.
3 mtr
Hoist / trolley
Push (3 mtrs)
81300
Hoist / trolley
Geared (3 mtrs)
81400
Hoist
Loadchain
lifting height
Price / m €
Hoist & trolley
Handchain
Control height
Price / m €
Overload
Protec-
tion
Price €
Parking
Device
Handchain
controlled
Price €
Non Corrosive
Offshore
protection
>200 μm
Price €Art. Nr. Price € Art. Nr. Price €A B C E F F1 R T L M N O n
500 210 1 6 KN 55-300 45 60 15 15 30 24 75 33 248 - - - - 12 ..-00600 -
1.000 245 1 11 KN 55-300 60 75 18 20 36 29 99 42 310 65 90 100 2.5m 22 ..-01100 ..-01100
2.000 315 1 22 KN 74-300 80 100 22 27 42 34 123 49 395 65 90 100 2.5m 40 ..-02200 ..-02200
3.200 370 1 33 KN 90-300 100 120 25 35 48 39 144 59 455 70 95 100 2.5m 60 ..-03300 ..-03300
5.000 475 3 52 KN 106-300 125 150 30 40 56 47 174 65 590 100 130 135 2.5m 75 ..-05200 ..-05200
Remark: These units will be manufactured on a fi xed beamwith in the range as specifi ed in the table.
35
Hoist-Trolley units / Hand driven / Ultra Low Headroom (Art. group 81650)
Capacity
Kg.
Head
Room
G
mm
No.
off
Falls
Trolley
Chassis
Type
Fixed for
beam
width in
range
mm.
DimensionsWeight
Kg.
3 mtr
Hoist / trolley
Geared (3 mtrs)
81650
Hoist
Loadchain
lifting height
Price / m €
Hoist & trolley
Handchain
Control height
Price / m €
Overload
Protection
Price €
Parking Device
Handchain
controlled
Price €
Non Corrosive
Offshore
protection
>200 μm
Price €Art. Nr. Price €A B C E F F1 R L N U O n
1.000 125 2 22 KN 74-300 80 100 22 20 30 24 226 465 140 105 100 2.5m 40 ..-01100
2.000 150 2 33 KN 90-300 100 120 25 20 36 29 266 550 145 150 135 2.5m 120 ..-02200
3.200 170 2 52 KN 106-300 125 150 30 26 39 31 310 635 175 150 135 2.5m 150 ..-03300
6.000 285 2 84 KN 119-300 160 190 35 33 48 39 430 900 225 200 300 2.5m 300 ..-05200
@ = on request
Remark: These units will be manufactured on a fi xed beamwith in the range as specifi ed in the table.
Hoist-Trolley units | Hand driven / Ultra low headroom
E
U N
n
F1
F
O
GLI
FT
R
L Technical information:
1) Capacity up till 25 ton possible.
2) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
3) Max. INP profi le restriction for 22KN = INP360,
33 KN = INP400, 52/64 KN = INP450.
Suitable for extreme narrow spaces and extreme Low headroom applications.
Features:
• Capacities 1.000-6.300 Kg in Ultra low headroom
execution
• Low in weight, ultralow headroom
• Low pulling force on the hand chain
• The hoist has double safety pawl, safe and sure
brakes
• Complete unit with standard surface treatment, 2
layer Alkyd paint 80 μm, orange colour RAL2008
Optional:
• Capacity > 6 ton
• Rubber buffers on trolley
• Stainless Steel nameplate
• Load test, with certifi cate
• Overload protection
• Stainless Steel load chain, available on request
(reduced capacity)
• Parking/Fixing device preventing the trolley for
uncontrolled movements, handchain controlled
safe and sure operation during light ship movements.
See table for option price
36
A ‘one stop’ investment solution
37
Trolleys | Hand driven / Rack & pinion type
W
S
NM
C
AB
L
R
D
Technical information:
1) Curved beams possible. For curved beams always
contact us or your local Agent
2) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
3) Max. INP profi le restriction for 22KN = INP360,
33 KN = INP400, 52/64 KN = INP450.
Features:
• Capacities 500-12.500 Kg
• The HD3C rack and pinion trolley have a smooth
movement and needs a low hand chain pull force to
move, due to its optimal gear ratio’s
• The worm gear box is of a self braking type and
suitable for 2 or 5 degrees list and trim
• Other angles on request
• Hand chain wheel with chain guides
• All Trolley models with standard surface treatment, 2
layer Alkyd paint 80 μm, RAL7021
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
Optional:
• Rubber buffers on trolley
• Stainless steel name plates
• Load test, with certifi cate
• Toothracks as loose item, to be welded under the
monorail beam
Trolleys / Hand driven / Rack & Pinion type (Art. group 83600)
Capacity
Kg.
Hoist
Mass
Max.
Kg.
Chassis
Type
Beam width
fi xed
“bw”
mm.
Dimensions Geared
Max. 2º
83600..
Geared
Max. 5º
83600..
Galvanized
Handchain
Control
lenght
Price / m €
A B C L W R D S N M
Modul Art. Nr. Price € Modul Art. Nr. Price €
500 100 11 KN fi xed 60 75 18 190 bw+85 99 120 @ 180 65 M = 3 ..-00621 M = 3 ..-00651
1.000 120 22 KN fi xed 80 100 22 255 bw+85 123 130 @ 185 70 M = 3 ..-01121 M = 3 ..-01151
2.000 250 22 KN fi xed 80 100 22 255 bw+85 123 130 @ 185 70 M = 3 ..-02221 M = 3 ..-02251
3.200 150 33 KN fi xed 100 120 25 300 bw+105 144 140 @ 220 75 M = 3 ..-03321 M = 3 ..-03351
5.000 300 52 KN fi xed 125 150 30 375 bw+120 174 175 @ 230 80 M = 3 ..-05221 M = 4 ..-05251
6.300 200 64 KN fi xed 125 150 30 375 bw+120 174 195 @ 250 80 M = 3 ..-06421 M = 4 ..-06451
8.000 550 84 KN fi xed 160 190 35 450 bw+150 220 240 @ 265 95 M = 4 ..-08421 M = 6 ..-08451
10.000 600 104 KN fi xed 160 190 35 450 bw+150 220 245 @ 290 95 M = 4 ..-10421 M = 6 ..-10451
12.500 150 124 KN fi xed 160 190 35 450 bw+150 220 275 @ 320 100 M = 4 ..-12421 M = 6 ..-12451
Toothracks Art. Nr. Price €
M = 3 toothrack 30 / 20 mm, mat. S355, per mtr 80000-33020
M = 4 toothrack 40 / 25 mm, mat. S355, per mtr 80000-44025
M = 6 toothrack 50 / 30 mm, mat. S355, per mtr 80000-65030
bw = beamwidth
@ = on request
38
Hoist-Trolley units | Hand driven / Rack & pinion type
Features:
• Capacities 500- 10.000 Kg in standard headroom
execution
• Advantages and high quality combined in one combo
pack unit
• Low in weight, compact headroom
• Low pulling force on the hand chain
• All Trolley models with standard surface treatment, 2
layer Alkyd paint 80 μm, RAL7021
• Hoist unit powder coating, orange colour RAL2008
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
• Suitable for all types of beams
Optional:
• Rubber buffers on trolley
• Stainless steel name plates
• Load test, with certifi cate
• Toothracks as loose item, to be welded under the
monorail beam
F
F1
LIF
TG
NM
C
AB
L
R
n
Technical information:
For detailed technical information about hoist and trolley
please refer to the individual pages for these products.
For trolleys : Page 37 / For manual hoist : Page 11
1) Curved beams possible. For curved beams always
contact us or your local Agent
2) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
3) Max. INP profi le restriction for 22KN = INP360,
33 KN = INP400, 52/64 KN = INP450.
Hoist-Trolley units / Hand driven / Rack & Pinion type (Art. group 83650)
Capacity
Kg.
Head
Room
G
mm.
Chassis
Type
Fixed
beam
width
mm.
Dimensions Hoist/Trolley unit Geared
Max. 2º
83650..
Hoist/Trolley unit Geared
Max. 5º
83650..
Hoist Loadchain
Lifting height
Price / m €
Hoist & trolley
Handchain
Control height
Price / m €
Overload
Protection
Price €
A B C F F1 R L N M n
Modul Art. Nr. Price € Modul Art. Nr. Price €
500 380 11 KN fi xed 60 75 18 30 24 99 190 180 65 2.5 m M = 3 ..-00621 M = 3 ..-00651
1.000 430 22 KN fi xed 80 100 22 36 29 123 255 185 70 2.5 m M = 3 ..-01121 M = 3 ..-01151
2.000 510 22 KN fi xed 80 100 22 42 34 123 255 185 70 2.5 m M = 3 ..-02221 M = 3 ..-02251
3.200 575 33 KN fi xed 100 120 25 48 39 144 300 220 75 2.5 m M = 3 ..-03321 M = 3 ..-03351
5.000 750 52 KN fi xed 125 150 30 56 47 174 375 230 80 2.5 m M = 3 ..-05221 M = 4 ..-05251
10.000 1035 104 KN fi xed 160 190 35 75 68 220 450 290 95 2.5 m M = 4 ..-10421 M = 6 ..-10451
@ = on request
Toothracks Art. Nr. Price €
M = 3 toothrack 30 / 20 mm, mat. S355, per mtr 80000-33020
M = 4 toothrack 40 / 25 mm, mat. S355, per mtr 80000-44025
M = 6 toothrack 50 / 30 mm, mat. S355, per mtr 80000-65030
39
Trolleys | Electrical / Rack & pinion type
W
S
NM
C
AB
L
R
D
Technical information:
1) Excl. additional counterweight (if applicable)
2) Curved beam possible. For curved beams always
contact us or your local Agent
- Trolleys suitable for curved beams are executed with
a guide roller set if necessary
- Details to be provided with order.
3) These trolleys are not suitable for manufacturing of
cranes or twin driven trolleys.
4) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
5) Max. INP profi le restriction for 22KN = INP360,
33 KN = INP400, 52/64 KN = INP450.
Features:
• Capacities 500 up to 12.500 Kg in standard model
• The HD3C electric driven rack & pinion trolley with
self braking worm geared motor has the advantage
that no separate electromagnetic brake is necessary
• The worm gear box is of a self braking type and
suitable for 2 or 5 degrees list and trim
• Other angles available on request
• Combine with all types electrical chain hoists
• Delivered with motor and gearbox, without contactor
controls and control box
• Limit switches, mounted on trolley, excl. cabling
• Single speed design smooth acceleration and stopping
• Motor IP54, ISO F, 400/230V - 3 Ph - 50Hz,
• Trolley manufactured for fi xed beam width
Optional:
• Rubber buffers on trolley
• Switch box with relays for trolley drive for integration
with hoist
• Integration with electric chain hoist unit
• Straight suspension bolt with spacers or bushings
• Load test, with certifi cate
Trolleys / Electrical / Rack & Pinion type (Art. group 83700)
Capacity
Kg.
Hoist
Mass
Max.
Kg.
Chassis
Type
Beam
Width
fi xed
“bw”
mm.
Dimensions Electric
Max. 2º (Incl. LS)
83700..
Electric
Max. 5º (Incl. LS)
83700..A B C L W R D S N M
Modul Art. Nr. Price € Modul Art. Nr. Price €
1.000 120 22 KN fi xed 80 100 22 255 bw+85 123 130 @ 185 70 M = 3 ..-01121 M = 3 ..-01151
2.000 250 22 KN fi xed 80 100 22 255 bw+85 123 130 @ 185 70 M = 3 ..-02221 M = 3 ..-02251
3.200 150 33 KN fi xed 100 120 25 300 bw+105 144 140 @ 220 75 M = 3 ..-03321 M = 3 ..-03351
5.000 300 52 KN fi xed 125 150 30 375 bw+120 174 175 @ 230 80 M = 3 ..-05221 M = 3 ..-05251
6.300 200 64 KN fi xed 125 150 30 375 bw+120 174 195 @ 250 80 M = 3 ..-06421 M = 4 ..-06451
8.000 550 84 KN fi xed 160 190 35 450 bw+150 220 240 @ 265 95 M = 4 ..-08421 M = 6 ..-08451
10.000 600 104 KN fi xed 160 190 35 450 bw+150 220 245 @ 290 95 M = 4 ..-10421 M = 6 ..-10451
12.500 150 124 KN fi xed 160 190 35 450 bw+150 220 275 @ 320 100 M = 4 ..-12421 M = 6 ..-12451
@ = on request
Toothracks Art. Nr. Price €
M = 3 toothrack 30 / 20 mm, mat. S355, per mtr 80000-33020
M = 4 toothrack 40 / 25 mm, mat. S355, per mtr 80000-44025
M = 6 toothrack 50 / 30 mm, mat. S355, per mtr 80000-65030
bw = beamwidth
40
Hoist-Trolley units | Electrical rack & pinion drive Type I
Features:
• Capacities 500 - 1.000 - 2.000 Kg in standard execution
• Optimized solution, high quality standards combined
in one combopack
• Compact design, very low in weight
• Silent design by gearboxes with helical geared
wheels, smooth and silent chain guiding
• Including chain container
• Integrated slipping clutch, against overload
• The HD3C electric driven rack & pinion trolley with
self braking worm geared motor has the advantage
that no separate electromagnetic brake is necessary.
• Other angles available on request
• Limit switches, mounted on trolley, excl. cabling
• Single speed design smooth acceleration and stopping
• Motor IP54, ISO F, 400/230V - 3 Ph - 50Hz
• Control voltage 48 V- with control push button
pendant, suspended from hoist
• Temperature class -10°….+40°C
Optional:
• Alternative supply voltage
• Power supply to unit by cabling on Festoon system
• Power supply to unit by multi conductor system
• Terminal box for connection to power supply point
• Main switch at the end of power supply line
• Rubber buffers on trolley
• Load test, with certifi cate
F1 LIF
TG
R
L
BA
C
MN
Technical information:
1) Curved beam possible. For curved beams always
contact us or your local Agent
- Trolleys suitable for curved beams are executed with
a guide roller set if necessary
- Details to be provided with order.
2) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
3) Max. INP profi le restriction for 22KN = INP360,
33 KN = INP400, 52/64 KN = INP450.
Hoist-Trolley units / Electrical / Rack & Pinion type I (Art. group 83725)
Hoist Hoist + Trolley Rack and Pinion Max. 5º
Capacity
Kg.
No.
Of Falls
Lifting
Speed
m/min
FEM
9,511
ISO 4301
Lifting
Height
Standard
Art. No.
83725..
Trolley
Type
Beamwidth
“bw” mm
min-max
mm
G A B C N M R L
Basic Unit
3 mtrs Lift
Price €
6 mtrs
Lift
Price €
Limit
Switches
Hoisting
Price €
Travel Limit
Switches
Price €
Towing arm
power
Price €
500 2/1 4,0 / 1,0 1Am 3 mtrs ..05001 22 KN fi xed 595 80 100 22 235 162 123 255
1.000 2/1 4,0 / 1,0 1Am 3 mtrs ..01101 22 KN fi xed 595 80 100 22 235 162 123 255
2.000 2/1 5,0 / 1,25 1Am 3 mtrs ..20001 22 KN fi xed 700 80 100 22 266 179 123 255
bw = beamwidth
41
Hoist-Trolley units | Electrical rack & pinion drive Type II
Features:
• Capacities 3.200 - 5.000 - 6.300 Kg
• Optimized solution, high quality standards combined
in one combopack.
• Silent design by gearboxes with helical geared
wheels, smooth and silent chain guiding
• Including chain container
• Integrated slipping clutch, against overload.
• The HD3C electric driven rack & pinion trolley with
self braking worm geared motor has the advantage
that no separate electromagnetic brake is necessary.
• Other angles available on request.
• Limit switches, mounted on trolley, excl. cabling
• Single speed design smooth acceleration and stopping
• Motor IP54, ISO F, 400/230V - 3 Ph - 50Hz
• Control voltage 48 V- with control push button
pendant, suspended from hoist
• Temperature class - 20°C ... +40°C.
Optional:
• Alternative supply voltage.
• Power supply to unit by cabling on Festoon system
• Power supply to unit by multi conductor system
• Terminal box for connection to power supply point
• Main switch at the end of power supply line
• IP56/66 protection for motors
• Rubber buffers on trolley
• Load test, with certifi cate.
LIF
T
F1
G
R
BA
C
MNL
83725 Hoist-Trolley units / Electrical / Rack & Pinion type II
Hoist Hoist + Trolley Rack and Pinion Max. 2º Rack and Pinion Max. 5º
Capacity
Kg.
No.
Of Falls
Lifting
Speed
m/min
FEM
9,511
ISO 4301
Lifting
Height
Standard
Art. No.
89101..
Trolley
Type
beam-
width
“bw”
mm
G A B C N M R LBasic
Unit
Price €
6 mtrs
Lift
Price €
Limit
Switches
Hoisting
Price €
Travel
Limit
Switches
Price €
Towing
arm
power
Price €
Basic
Unit
Price €
6 mtrs
Lift
Price €
Limit
Switches
Hoisting
Price €
Travel
Limit
Switches
Price €
Towing
arm
power
Price €
3.200 2/1 4,0 / 1,0 1Bm 3 mtrs ..32001 33 KN fi xed 820 100 120 25 315 181 144 300
5.000 2/1 4,0 / 1,0 1Am 3 mtrs ..50001 52 KN fi xed 865 125 150 30 316 206 174 375
6.300 2/1 3.2/0.75 1Bm 3 mtrs ..63001 64 KN fi xed 885 125 150 30 316 206 174 375
Technical information:
1) Curved beam possible. For curved beams always
contact us or your local Agent
- Trolleys suitable for curved beams are executed with
a guide roller set if necessary
- Details to be provided with order.
2) Non corrosive treatments, special surface protection
for aggressive environments, outdoor applications,
offshore & marine environments. Reference to page xx
of this catalogue for detailed application information.
3) Max. INP profi le restriction for 33KN = INP400,
52/64 KN = INP450.
bw = beamwidth
42
Non Corrosive Treatments | Protection
For over the years the demand of lifting gear which shall be resistant against corrosion
has grown intensively. Most of the small lifting equipment is delivered to the market
with a standard powder coating or alkyd resin based painting systems with 60-80 μm
protective coating. The equipment returning from drilling rigs, offshore vessels every
year shows intensively corrosion and has to be painted every year or even in shorter
periods.
Lifting equipment used as loose gear for maintenance even lasts shorter, because this
equipment suffers lot of damage due to the transport on board. The standard paint
system has a lot of impact to resist and is damaged very fast. High costs are made in
order to give the equipment a longer lifetime by disassembly and repainting.
Equipment permanently installed is also suffering heavy corrosion attacks due to the
saline, salty and wet environment.
Since the lifting equipment like hand chain hoists, trolleys and combinations have
small surfaces the usage of heavy paint systems is very diffi cult. Therefore we have
developed a system of corrosion protection based on the standard environment as
laid down in ISO 12944 C5I, - industrial areas with high humidity and aggressive at-
mosphere - and C5M, - Maritime and offshore environments with high salinity - .
Guaranteed long lifetimee
u
n
d
h
43
against corrosion
ZincAL Protection system.
The ZincAL protection system is applied to the separate parts of the hoist and
trolley units by a fl ame spraying process. The top color of such a treatment is being
recognized by the typical grey color. On top of this system a customers top coat with a
specifi c color can always be applied as an option.
The advantages of our Non Corrosive treatments are :
• Heavy duty corrosion resistance for longer periods.
• Impact resistant corrosion protection layer of min. 200 μm, self closing after damage
due to Zinc component in the alloy.
• Longer lifetime and repainting not necessary.
• Environmental friendly, replacement due to log lifetime repainting schedule.
• Well known protection system in offshore as well as maritime application.
• Universal protection against all kinds of aggressive components.
• Can be applied to single units and large quantities of units.
An optional system with AISI material being applied is being used in situations where
e.g. zinc or paint is not allowed.
Of course the use of various offshore paint systems are possible too when large
quantities can be reached. You can always contact us for more information.
For the separate prices we refer to the further catalog information at the separate pages
with the Non Corrosive options mentioned.
We have solutions for every kind of operation
For over 40 years of experience in the maritime and offshore sector!
Van Leusden is a well known manufacturer and supplier of special
lifting equipment on board of vessels, platforms and other kinds of
maritime environments.
Working in the maritime, oil and gas industries means working in
extreme conditions. Lifting equipment must comply with the most
extreme conditions and able to resist the forces of gravity.
Do you need to make the most of the space you have and literally
need every millimeter you can get ? Our engine room and pump
room cranes and ultra compact lifting devices are just spelling the
answer. Do loads to be moved through curves and be manouvered
effortlessly around obstacles? Van Leusden supplies a variety of
slewing trolleys, telescopic travelling cranes with a guaranteed op-
timum action radius.
Van Leusden has a wide experience in the design, engineering and
manufacturing of special cranes for Maritime and Offshore applications.
Especially in the range for applications in Engine rooms, pump
rooms, compressor houses en other maritime / offshore area’s Van
Leusden has a wide range of solutions.
We can take care of you complete program of lifting equipment needed
on board your vessel or platform. We have a lot of solutions for low
headroom, narrow spaces, curved tracks, etc, etc.
We can guide you through the process from engineering from scratch
to the delivery of a complete installation on board all according to
you specifi c demands and specifi cations.
Do you have a specifi c hoisting problem? Do not worry, we will fi nd
you a suitable design to fi t your demands.
r
45
This page shows you previous delivered
cranes from the projects we have comple-
ted. Our clients are coming from all over
the world. Many makers’ lists present Van
Leusden as preferred manufacturer for
their cranes on board.
Any queries regarding this subject can be
directly discussed with your local agent or
directly with us.
Feel free to contact us or your local agent
for more information or visit our website
www.vanleusden.com
46
Explosion protection
Using the correct and suitable equipment in a hazardous environments is very impor-
tant. We have the knowledge in advising you the conversions from standard manual
hoisting equipment into Explosion protected equipment. You can be assured of the
correct specifi cations.
We have developed several solutions for manual hoists and trolleys and cranes with the
correct specifi cations for operation in Explosion hazardous areas.
Our standard programme of lifting equipment can be converted into Explosion protec-
ted, Non sparking equipment. The technology combined with our corrosion protection
systems enables you to apply your products into various environments, like offshore,
chemical, petrochemical industries. Heavy duty equipment, with right protection ena-
bles you to operate safe, sure and with a guaranteed long life time.
All our equipment is evaluated and complies with ATEX regulations for explosion pro-
tection. The equipment is accompanied by a declaration of conformity and applicable
manuals for safe operation.
Explosion protection on manual hoists and trolleys is mainly provided by Non Sparking
constructions and preventions in the general design of the device.
The principle of Ferro – Non Ferro contact parts, corrosion protection and safety design
principles is used to minimize the risk of generating heat and sparks.
Guaranteed long lifetime
principles is used to
e
v
c
c
a
47
The explosion protection systems allow combinations with Non Corrosive treatments as well.
Excellent combinations for high quality equipment in special environments.
Do you have any questions or special queries, please feel free to contact you local
dealer or us directly!
The basis for this protection is guideline 94/9/EC European ATEX Guidelines.
The equipment is classifi ed to be used in CAT. II environments.
The following degrees of protection can be manufactured :
1. Basic Protection
Equipment of the type Basic protection can be used in Zone 2 for gases of explosion
group IIA & IIB provided that Hydrogen Sulphide and Ethylene Oxide are excluded.
These devices have a minimum degree of protection against sparking on the fast
contact parts and against corrosion of certain critical contact parts.
The devices are designated with the following classifi cation: EX II 3 IIB c T3 (Zone 2)
2. Medium Protection
Equipment of the type Medium protection can be used in Zone 1&2 for gases of ex-
plosion group IIA & IIB provided that Hydrogen Sulphide and Ethylene Oxide are ex-
cluded.
These devices have an increased degree of protection against sparking on the fast
contact parts and that of designated critical contact parts and against corrosion of
certain parts.
The devices are designated with the following classifi cation: EX II 2 IIB c T3 (Zone 1)
3. High Protection
Equipment of the type High protection can be used in Zone 1&2 for gases of explosion
group IIA & IIB & IIC provided that Hydrogen Sulphide and Ethylene Oxide are excluded.
These devices have an increased degree of protection against sparking on the fast
contact parts and that of designated critical contact parts and against corrosion of
certain parts.
To prevent the risk for sparking some parts are replaced for non corrosive materials and
safe working loads are reduced for safety and in relation to the use of non corrosive
materials.
The devices are designated with the following classifi cation: EX II 2 IIC c T3 (T4)
For each product there is a description on the product page.
Trolleys
Push & geared / Standard type /
Explosion protected 48
Push & geared / Stainless steel 49
Hoists Hand driven chain hoists /
Explosion protected / Basic / Medium 50
Hand driven chain hoists /
Explosion protected / High 51
Hoist-Trolley units Hand driven / Explosion protected /
Basic / Medium 52
Hand driven / Explosion
protected / High 53
Hand driven / Low headroom /
Explosion protected / Basic / Medium 54
Hand driven / Low headroom /
Explosion protected / High 55
Hand driven / Ultra low
headroom / EX. 56
Cranes Hand operated /
Under slung crane / EX. 57
Hand operated /
Overhead crane / EX. 58
Air Hoist Profi TI / Heavy Duty 60
Profi TI / Trolley-Hoist
combinations / Heavy Duty 61
Profi EH / Monorail Air Hoist
Units / Heavy Duty 62
Profi UH / Ultra low Monorail
Hoists / Heavy Duty 63
48
Trolleys | Push & geared / Standard type / Explosion protected
Features:
• Capacities 500- 25.000 Kg
• Explosion protected model in Basic/Medium execution
suitable up till Ex Class Ex II 2 G IIB T3 (Zone 1&2)
Non Sparking protection of fast moving mechanical
contact parts and rubber buffers on trolley
• Explosion protected model in High execution suitable
up till Ex Class Ex II 2 G IIC T3 (Zone 1)
• Non sparking protection of fast moving mechanical
contact parts rubber buffers, increased with non
sparking protection of wheels and handchains
• Electric galvanized chassis, suspension bolts and
wheels up to 64 KN model
• Models 84 KN and higher, standard surface
treatment, 2 layer Alkyd paint 80 μm, RAL7021
• Design according to EN 13157 and ATEX for
explosion protection, CE-marking & Declaration of
conformity included
Optional:
• Fixed beam execution
• Straight suspension bolt with spacers
• Extra suspension set for other beam range
• Rubber buffers on trolley
• Extended chain wheel drive, M=....mm (max. 300 mm)
• Special side plates to increase dimension “E”
• Stainless steel name plates
• Load test, with certifi cate
D
E
AB
C
W
O
MN
FG
H
RL Technical information:
1) * Mass plain type
** Mass Geared type, excl. hand chain 1 mtr Lift = 1 Kg.
2) For curved beams always contact us or your local Agent
3) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
4) Max. INP profi le restriction for 6 KN = INP220,
11KN = INP300, 22KN = INP360, 33 KN = INP400,
52/64 KN = INP450.
Trolleys / Push & Geared / ATEX Explosion protected type (Art. group 83800-83900)
Capa-
city
Kg.
Hoist
Mass
Max.
Kg.
Chassis
Type
Adjustable
beam width
min~max
mm.
R(min).
Radius
Beam
2)
mm.
Dimensions Chain
Pull
Max.
Kg.
Weight
Kg.
1)
*-**
Push
83800..
Art. Nr.
Push
Basic/
medium
Protec-
tion
83800..
Price €
Push
High
Protec-
tion
83900..
Price €
Geared
Art. Nr.
GearedBasic/
mediumProtec-
tionExcl.
Hand-chain
83810..Price €
Hand
Chain
Galv.
per m
Price €
Geared
High
Protec-
tion
Excl.
Hand-
chain
83910..
Price €
Hand
Chain
S.St.
per m
Price €
Non Cor-
rosive
Offshore
protec-
tion
>200 μm
Price €
A B C L H W R D E F G N M O
500 100 6 KN55~102
1000 45 60 15 185 125160
75 52 15 45 30 - - - - 3..-00600 ..-00600
105~152 210 ..-00601 ..-00601
1.000 120 11 KN
55~102
1500 60 75 18 225 160
175
99 60 20 60 30 65 90 100 10 5-6
..-01100 ..-01100
105~152 225 ..-01101 ..-01101
156~203 275 ..-01102 ..-01102
207~254 325 ..-01103 ..-01103
2.000 250 22 KN
74~127
1600 80 100 22 290 205
215
123 75 27 80 35 65 90 100 16 11-12
..-02200 ..-02200
127~180 270 ..-02201 ..-02201
190~243 330 ..-02202 ..-02202
254~305 390 ..-02203 ..-02203
3.200 150 33 KN
90~143
2000 100 120 25 350 245
250
144 90 35 100 40 70 95 100 20 18-19
..-03300 ..-03300
149~203 310 ..-03301 ..-03301
203~254 360 ..-03302 ..-03302
251~305 410 ..-03303 ..-03303
5.000 300 52 KN
106~156
2900 125 150 30 425 305
270
174 117 40 120 60 100 130 135 20 31-32
..-05200 ..-05200
160~210 325 ..-05201 ..-05201
210~260 375 ..-05202 ..-05202
255~305 420 ..-05203 ..-05203
6300 200 64 KN
106~156
2900 125 150 30 425 310
270
174 117 40 120 60 100 130 135 25 33-34
..-06400 ..-06400
160~210 325 ..-06401 ..-06401
210~260 375 ..-06402 ..-06402
255~305 420 ..-06403 ..-06403
8.000 550 84 KN fi xed (119 Min)
3500
160 190 35 515 365 bw+150 220 145 45 145 80 105 130 270 16 85-90 ..-08401 ..-08401
10.000 600 104 KN fi xed (131 Min) 160 190 35 515 370 bw+150 220 145 45 145 80 105 130 270 19 90-95 ..-10401 ..-10401
12.500 150 124 KN fi xed (143 Min) 160 190 35 515 370 bw+150 220 145 45 145 80 105 130 270 23 95-100 ..-12401 ..-12401
16.000 700 164 KN fi xed (155 Min)
5500
200 240 50 615 445 bw+185 272 165 42 165 100 135 170 300 20 135-145 ..-16401 ..-16401
20.000 800 204 KN fi xed (170 Min) 200 240 50 615 450 bw+185 272 165 42 165 100 135 170 300 25 140-150 ..-20401 ..-20401
25.000 900 254 KN fi xed (185 Min) 200 240 50 615 455 bw+195 272 165 42 165 100 135 170 380 25 150-160 ..-25401 ..-25401
min. beamwidth
max. beamwidth
bw = beamwidth
49
Trolleys | Push & geared / Stainless steel
N L
R
C
AB
E HFG
W
O
D
M
Technical information:
1) * Mass plain type
** Mass Geared type, excl. hand chain 1 mtr Lift = 1Kg.
2) For curved beams always contact us or your local Agent
Features:
• Capacities 500- 3.200 Kg
• Suspension of all types of hoists
• Trolley chassis, wheels, bearings, and other construc-
tion parts in Stainless Steel AISI316
• Solution for extreme corrosive atmospheres
• Applications in various area’s like Offshore platforms,
Food industry, Chemical of Pharmaceutical industries
Optional:
• Straight suspension bolt with spacers
• Extra suspension set for other beam range
• Rubber buffers on trolley
• Extended chain wheel drive, M=....mm (max. 300 mm)
• Special side plates to increase dimension “E”
• Stainless steel name plates
• Load test, with certifi cate
Trolleys / Push & Geared / Stainless type (Art. group 82200-82250)
Capacity
Kg.
Hoist
Mass
Max.
Kg.
Chassis
Type
Fixed
beam width
range min-max
mm.
R(min).
Radius
Beam
2)
mm.
Dimensions
Chain
Pull
Max.
Kg.
Weight
Kg.
1)
*-**
Push
82200..
Art. Nr.
Push
Price €
Geared
82250..
Art. Nr.
Geared
excl.
Hand-
chain
Price €
Stainless
Handchain
Control
Length
Price / m €
A B C L H W R D E F G N M O
500 100 6 KN55-102
1000 45 60 15 150 125160
75 52 15 45 30 - - - - 3..-00600 -/-
105-152 210 ..-00601 -/-
1.000 120 11 KN
55-102
1500 60 75 18 190 160
175
99 60 20 60 30 65 90 100 10 5-6
..-01100 ..-01100
105-152 225 ..-01101 ..-01101
156-203 275 ..-01102 ..-01102
207-254 325 ..-01103 ..-01103
2.000 250 22 KN
74-127
1600 80 100 22 255 205
215
123 75 27 80 35 65 90 100 16 11-12
..-02200 ..-02200
127-180 270 ..-02201 ..-02201
190-243 330 ..-02202 ..-02202
254-305 390 ..-02203 ..-02203
3.200 150 33 KN
90-143
2000 100 120 25 300 245
250
144 90 35 100 40 70 95 100 20 18-19
..-03300 ..-03300
149-203 310 ..-03301 ..-03301
203-254 360 ..-03302 ..-03302
251-305 410 ..-03303 ..-03303
Remark: These units will be manufactured on a fi xed beamwith in the range as specifi ed in the table.
50
Hoists | Hand driven chain hoists / Explosion protected
Features:
• Capacities 500 - 32.000 Kg. in standard execution.
• Super modern, excellent combination with Atlas
Explosion protected trolleys.
• Explosion protected model in Basic execution
suitable up till Ex Class Ex II 3 G IIB T3 (Zone 2)
• Non Sparking protection of fast moving mechanical
contact parts of the hand chain movements and
internal fast moving hoist parts. Hoist with electric
galvanized chains
• Explosion protected model in Medium execution
suitable up till Ex Class Ex II 2 G IIB T3 (Zone 1) Non
Sparking protection of fast moving mechanical contact
parts of the hand chain movements and internal fast
moving hoist parts, extended with non sparking top
and load hook. Hoist with electric galvanized chains
• Compact & light in weight
• Robust body construction, prolonging durability
• Low pulling effort
• 2 independent pawls are to enhance safety &
protection
• Automatic load brake
• Heavy duty reduction gear & load sheave
• High safety factor
• Low head room
• Easy and low maintenance cost
Hoists / Hand chain driven hoists ATEX BASIC / MEDIUM (Art. group 86800)
Capacity
Kg.
Headroom
G
mm.
Max. Pull
Handchain
Kg.
No. Of
Falls
Chain
dim.
mm.
Weight
3 mtrs.
Lift
Kg.
Dimensions
ATEX BASIC
EX 3G IIB T3
ATEX MEDIUM
EX 2G IIB T3
Load
Chain
per m
Price €
Hand
Chain
per m
Price €
Overload
Protection
Price €
Option Option
A B D E F F1 86810..
Art. Nr.
3 mtrs. Lift
Execution
Price €
86810..
Art. Nr.
3 mtrs. Lift
Execution
Price €
Protection 86810..Art. Nr.
Non Corrosive
ZincAlPrice €
Protection 86810..Art. Nr.
Non Corrosive
AISIPrice €
500 260 21 1 5 8 82 56 90 48 30 24 ..-00510 ..-00520 ..-00570 ..-00580
1.000 300 24 1 6,3 10,5 83 63 100 59 36 29 ..-01010 ..-01020 ..-01070 ..-01080
1.600 345 29,5 1 7,1 15 90 75 115 69 39 31 ..-01610 ..-01620 ..-01670 ..-01680
2.000 380 33,5 1 7,9 21 98 85 132 82 42 34 ..-02010 ..-02020 ..-02070 ..-02080
3.200 435 38 1 10 30,5 106 92 160 94 48 39 ..-03210 ..-03220 ..-03270 ..-03280
5.000 575 36 3 7,1 35 90 75 188 94 56 47 ..-05010 ..-05020 ..-05070 ..-05080
10.000 790 43 3 10 76 106 92 283 122 75 68 ..-10010 ..-10020 ..-10070 ..-10080
16.000 1020 47 5 10 155 106 92 340 205 90 81 ..-16010 ..-16020 ..-16070 ..-16080
20.000 1040 45x2 6 10 250 153 153 390 390 90 81 ..-20010 ..-20020 ..-20070 ..-20080
25.000 1060 44x2 8 10 320 185 185 390 390 90 81 ..-25010 ..-25020 ..-25070 ..-25080
32.000 1470 47x2 10 10 440 215 215 400 400 110 95 ..-32010 ..-32020 ..-32070 ..-32080
@ = on request
F
F1
GLI
FT
B A E D
G
LIF
T
F1
F
G
AB DE
G
F1F
GLI
FT
A B D E
G
F
F1
GLI
FT
B A E D
G
500 Kg - 3.200 Kg 5.000 Kg - 10.000 Kg 16.000 Kg 20.000 Kg - 32.000 Kg
BASIC / MEDIUM
51
• Explosion protected model in High execution suitable
up till Ex Class Ex II 2 G IIC T3 (Zone 1)
• Non Sparking protection of fast moving mechanical
contact parts of the hand chain movements and
internal fast moving hoist parts, extended with non
sparking top and load hook and stainless steel non
sparking hand chain. (Reduced capacity)
Optional:
• Integration directly into standard trolley possible to
get the lowest headroom possible, see page 52
• Low and ultra low headroom types available, see
page 54 and 56
• Overload protection
Non corrosive execution, with special protection by
fl ame spraying, in ZincAl or special paint system
See page 42 for more information
Design according to ATEX for explosion protection,
CE-marking & Declaration of conformity included
Hoists / Hand chain driven hoists ATEX HIGH (Art. group 86800)
Capacity
Kg.
Headroom
G
mm.
Max. Pull
Hand-
chain
Kg.
No. Of
Falls
Chain
dim.
mm.
Weight
3 mtrs.
Lift
Kg.
Dimensions
ATEX HIGH
EX II 2G IIC T3
Load
Chain
per m
Price €
Handchain
Stainless St.
per m
Price €
Overload
Protection
Price €
Option
Loadchain
Stainless St.
per m
Price €
Option Option
A B D E F F1 86810..
Art. Nr.
3 mtrs. Lift
Execution
Price €
Protection 86810..Art. Nr.
Non Corrosive
ZincAlPrice €
Protection 86810..Art. Nr.
Non Corrosive
AISIPrice €
500 260 21 1 5 8 82 56 90 48 30 24 ..-00550 ..-00570 ..-00580
1.000 300 24 1 6,3 10,5 83 63 100 59 36 29 ..-01050 ..-01070 ..-01080
1.250 345 29,5 1 7,1 15 90 75 115 69 39 31 ..-01650 ..-01670 ..-01680
2.000 435 38 1 10 30,5 106 92 160 94 48 39 ..-03250 ..-03270 ..-03280
3.750 575 36 3 7,1 35 90 75 188 94 56 47 ..-05050 ..-05070 ..-05080
6.000 790 43 3 10 76 106 92 283 122 75 68 ..-10050 ..-10070 ..-10080
10.000 1020 47 5 10 155 106 92 340 205 90 81 ..-16050 ..-16070 ..-16080
12.000 1040 45x2 6 10 250 153 153 390 390 90 81 ..-20050 ..-20070 ..-20080
16.000 1060 44x2 8 10 320 185 185 390 390 90 81 ..-25050 ..-25070 ..-25080
20.000 1470 47x2 10 10 440 215 215 400 400 110 95 ..-32050 ..-32070 ..-32080
@ = on request
Basic unit price with electric galvanized load chain and Stainless steel Hand Chain. : For increased NON SPARKING protection Stainless Steel Loadchain can be used.
F
F1
GLI
FT
B A E D
G
LIF
T
F1
F
GAB DE
G
F1F
GLI
FT
A B D E
G
F
F1
GLI
FT
B A E D
G
500 Kg - 3.200 Kg 5.000 Kg - 10.000 Kg 16.000 Kg 20.000 Kg - 32.000 Kg
Hoists | Hand driven chain hoists / Explosion protected
HIGH
52
Hoist-Trolley units | Hand driven / Explosion protected
F
F1
LIF
TG
E
AB
C
O
N
nn
R
LTechnical information:
For detailed technical information about hoist and trolley
please refer to the individual pages for these products.
For trolleys : Page 48 / For manual hoist : Page 50/51
1) For curved beams always contact us or your local Agent
2) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
3) Max. INP profi le restriction for 6 KN = INP220,
11KN = INP300, 22KN = INP360, 33 KN = INP400,
52/64 KN = INP450.
Features:
• Capacities 500- 25.000 Kg
• Advantages and high quality in one combo pack
• Low in weight, compact headroom
• Low pulling force on the hand chain
• Standard adjustable fl ange width in different ranges
• Electric galvanized trolley chassis, suspension bolts
and wheels up to 64 KN model
• Hoist unit powder coating, orange colour RAL2008
• Trolley model 104 KN and higher, standard surface
treatment, 2 layer Alkyd paint 80 μm, RAL 7021
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
• Suitable for all types of beams
• Explosion protected model in Basic execution
suitable up till Ex Class Ex II 3 G IIB T3 (Zone 2)
• Non Sparking protection of fast moving mechanical
contact parts of the hand chain movements and
internal fast moving hoist parts
• Hoist with electric galvanized chains
• Explosion protected model in Medium execution
suitable up till Ex Class Ex II 2 G IIB T3 (Zone 1) Non
Sparking protection of fast moving mechanical
contact parts of the hand chain movements and
internal fast moving hoist parts, extended with non
sparking top and load hook. Hoist with electric
galvanized chains
Hoist-Trolley units / Hand driven / Standard type (Art. group 83800) ATEX BASIC/MEDIUM
Capa-
city
Kg.
Head
Room
G
No.
off
Falls
Trolley
Chassis
Type
Adjustable
beam width
min~max
mm.
R(min).
Radius
Beam
mm.
Dimensions
Weight
Kg.
1)
*-**
Hoist / trolleyPush (3 mtrs)ATEX BASIC
EX II 3G IIB T383820..
Hoist / trolleyPush (3 mtrs)ATEX MEDIUMEX II 2G IIB T3
83830..
Hoist / trolleyGeared (3 mtrs)
ATEX BASICEX II 3G IIB T3
83825..
Hoist / trolleyPush (3 mtrs)ATEX MEDIUMEX II 2G IIB T3
83835..
Hoist
Loadchain
Lifting height
Price / m €
Hoist & trolley
Handchain
Control height
Price / m €
A B C E F F1 R L N O n
Art. Nr. Price € Art. Nr. Price € Art. Nr. Price € Art. Nr. Price €
500 315 1 6 KN55~102
1000 45 60 15 15 30 24 75 185 - - - 11..-00600 ..-00600 - -
105~152 ..-00601 ..-00601 - -
1.000 360 1 11 KN
55~102
1500 60 75 18 20 36 29 99 225 90 100 2.5m 20
..-01100 ..-01100 ..-01100 ..-01100
105~152 ..-01101 ..-01101 ..-01101 ..-01101
156~203 ..-01102 ..-01102 ..-01102 ..-01102
207~254 ..-01103 ..-01103 ..-01103 ..-01103
1.600 420 1 22 KN
74~127
1600 80 100 22 27 39 31 123 290 90 100 2.5m 30
..-01600 ..-01600 ..-01600 ..-01600
127~180 ..-01601 ..-01601 ..-01601 ..-01601
190~243 ..-01602 ..-01602 ..-01602 ..-01602
254~305 ..-01603 ..-01603 ..-01603 ..-01603
2.000 455 1 22 KN
74~127
1600 80 100 22 27 42 34 123 290 90 100 2.5m 36
..-02200 ..-02200 ..-02200 ..-02200
127~180 ..-02201 ..-02201 ..-02201 ..-02201
190~243 ..-02202 ..-02202 ..-02202 ..-02202
254~306 ..-02203 ..-02203 ..-02203 ..-02203
3.200 525 1 33 KN
90~143
2000 100 120 25 35 48 39 144 350 95 100 2.5m 53
..-03300 ..-03300 ..-03300 ..-03300
149~203 ..-03301 ..-03301 ..-03301 ..-03301
203~254 ..-03302 ..-03302 ..-03302 ..-03302
251~305 ..-03303 ..-03303 ..-03303 ..-03303
5.000 690 3 52 KN
106~156
2900 125 150 30 40 56 47 174 425 130 135 2.5m 70
..-05200 ..-05200 ..-05200 ..-05200
160~210 ..-05201 ..-05201 ..-05201 ..-05201
210~260 ..-05202 ..-05202 ..-05202 ..-05202
255~305 ..-05202 ..-05202 ..-05202 ..-05202
10.000 935 3 104 KN fi xed (131 Min) 3500 160 190 35 45 75 68 220 515 135 270 2.5m 175 ..-10401 ..-10401 ..-10401 ..-10401
16.000 1185 5 164 KN fi xed (155 Min)
5500
200 240 50 42 90 81 272 615 155 300 2.5m 305 ..-16401 ..-16401 ..-16401 ..-16401
20.000 1205 6 204 KN fi xed (170 Min) 200 240 50 42 90 81 272 615 155 300 2.5m 415 ..-20401 ..-20401 ..-20401 ..-20401
25.000 1265 8 254 KN fi xed (185 Min) 200 240 50 42 90 81 272 615 160 380 2.5m 495 ..-25401 ..-25401 ..-25401 ..-25401
@ = on request
BASIC / MEDIUM
53
Hoist-Trolley units | Hand driven / Explosion protected
F
F1
LIF
TG
E
AB
C
O
N
nn
R
LTechnical information:
For detailed technical information about hoist and trolley
please refer to the individual pages for these products.
For trolleys : Page 48 / For manual hoist : Page 50/51
1) For curved beams always contact us or your local Agent
2) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
3) Max. INP profi le restriction for 6 KN = INP220,
11KN = INP300, 22KN = INP360, 33 KN = INP400,
52/64 KN = INP450.
• Explosion protected model in High execution suitable
up till Ex Class Ex II 2 G IIC T3 (Zone 1)
• Non Sparking protection of fast moving mechanical
contact parts of the hand chain movements and
internal fast moving hoist parts, extended with
bronze trolley wheels, non sparking top and load
hook and stainless steel non sparking hand chain.
(Reduced capacity)
Optional:
• Stainless steel name plate
• Overload protection
• Temperature class T4 will be observed separately for
each project
Hoist-Trolley units / Hand driven / Standard type (Art. group 83900) ATEX HIGH
Capacity
Kg.
Head
Room
G
No.
off Falls
Trolley
Chassis
Type
Adjustable
beam width
min~max
mm.
R(min).
Radius
Beam
mm.
Dimensions Weight
Kg.
3 mtr
Hoist / trolleyPush (3 mtrs)
ATEX HIGHEX II 2G IIC T3
83920..
Hoist / trolleyGeared (3 mtrs)
ATEX HIGHEX II 2G IIC T3
83925..
Hoist
Loadchain
Lifting height
Price / m €
Hoist & trolley
Handchain
Control height
Price / m €
A B C E F F1 R L N O n
Art. Nr. Price € Art. Nr. Price €
500 315 1 6 KN55~102
1000 45 60 15 15 30 24 75 185 - - - 11..-00600 -
105~152 ..-00601 -
1.000 360 1 11 KN
55~102
1500 60 75 18 20 36 29 99 225 90 100 2.5m 20
..-01100 ..-01100
105~152 ..-01101 ..-01101
156~203 ..-01102 ..-01102
207~254 ..-01103 ..-01103
1.250 420 1 22 KN
74~127
1600 80 100 22 27 39 31 123 290 90 100 2.5m 30
..-01600 ..-01600
127~180 ..-01601 ..-01601
190~243 ..-01602 ..-01602
254~305 ..-01603 ..-01603
2.000 525 1 33 KN
90~143
2000 100 120 25 35 48 39 144 350 95 100 2.5m 53
..-03300 ..-03300
149~203 ..-03301 ..-03301
203~254 ..-03302 ..-03302
251~305 ..-03303 ..-03303
3.750 690 3 52 KN
106~156
2900 125 150 30 40 56 47 174 425 130 135 2.5m 70
..-05200 ..-05200
160~210 ..-05201 ..-05201
210~260 ..-05202 ..-05202
255~305 ..-05202 ..-05202
6.000 935 3 104 KN fi xed (131 Min) 3500 160 190 35 45 75 68 220 515 135 270 2.5m 175 ..-10401 ..-10401
10.000 1185 5 164 KN fi xed (155 Min)
5500
200 240 50 42 90 81 272 615 155 300 2.5m 305 ..-16401 ..-16401
12.000 1205 6 204 KN fi xed (170 Min) 200 240 50 42 90 81 272 615 155 300 2.5m 415 ..-20401 ..-20401
16.000 1265 8 254 KN fi xed (185 Min) 200 240 50 42 90 81 272 615 160 380 2.5m 495 ..-25401 ..-25401
@ = on request
Basic unit price with electric galvanized load chain and Stainless steel Hand Chain for Hoist & Trolley. : For increased NON SPARKING protection Stainless Steel Loadchain can be used.
HIGH
54
Hoist-Trolley units | Hand driven /
Technical information:
1) For curved beams always contact us or your local Agent
2) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
3) Max. INP profi le restriction for 6 KN = INP220,
11KN = INP300, 22KN = INP360, 33 KN = INP400,
52/64 KN = INP450
Features:
• Capacities 500- 5.000 Kg in low headroom execution
• Suitable for narrow spaces and low headroom
applications
• Low in weight, compact design
• Low pulling force on the hand chain
• The hoist has double safety pawl, safe and sure brakes
• Trolley manufactured for fi xed beamwidth in different
ranges
• Trolley standard surface treatment, 2 layer Alkyd
paint 80 μm, orange colour RAL2008
• Hoist unit powder coating, orange colour RAL2008
• Trolley wheels with life time lubricated bearings
• Wheel break supports and anti-tilt device integrated
• Explosion protected model in Basic execution
suitable up till Ex Class Ex II 3 G IIB T3 (Zone 2)
• Non Sparking protection of fast moving mechanical
contact parts of the hand chain movements and
internal fast moving hoist parts
• Hoist with electric galvanized chains
• Explosion protected model in Medium execution
suitable up till Ex Class Ex II 2 G IIB T3 (Zone 1) Non
Sparking protection of fast moving mechanical
contact parts of the hand chain movements and
internal fast moving hoist parts, extended with non
sparking top and load hook. Hoist with electric
galvanized chains
Hoist-Trolley units / Hand driven / Low headroom / Explosion Protected ATEX BASIC/MEDIUM
Capa-
city
Kg.
Head
Room
G
No.
off
Falls
Trolley
Chassis
Type
Fixed for
beam
width
in range
mm.
DimensionsWeight
Kg.
3 mtr
Hoist / trolley
Push (3 mtrs)
ATEX BASIC
83840
Hoist / trolley
Push (3 mtrs)
ATEX MEDIUM
83850
Hoist / trolley
Geared (3 mtrs)
ATEX BASIC
83845
Hoist / trolley
Geared (3 mtrs)
ATEX BASIC
83855
Hoist
Loadchain
Lifting
height
Price / m €
Hoist & trolley
Handchain
Control height
Price / m €
Overload
Protection
Price €
A B C E F F1 R T L M N O n
Art. Nr. Price € Art. Nr. Price € Art. Nr. Price € Art. Nr. Price €
500 210 1 6 KN 55-300 45 60 15 15 30 24 75 33 285 - - - - 12 ..-00600 ..-00600 - -
1.000 245 1 11 KN 55-300 60 75 18 20 36 29 99 42 345 65 90 100 2.5m 22 ..-01100 ..-01100 ..-01100 ..-01100
2.000 455 1 22 KN 74-300 80 100 22 27 42 34 123 49 430 65 90 100 2.5m 40 ..-02200 ..-02200 ..-02200 ..-02200
3.200 370 1 33 KN 90-300 100 120 25 35 48 39 144 59 505 70 95 100 2.5m 60 ..-03300 ..-03300 ..-03300 ..-03300
5.000 475 3 52 KN 106-300 125 150 30 40 56 47 174 65 640 100 130 135 2.5m 75 ..-05200 ..-05200 ..-05200 ..-05200
Remark: These units will be manufactured on a fi xed beamwith in the range as specifi ed in the table.
OB A
E
N
LIF
TG
C
F1
F
M
T
n
R
L
BASIC / MEDIUM
55
Low headroom / Explosion protected
Technical information:
1) For curved beams always contact us or your local Agent
2) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
3) Max. INP profi le restriction for 6 KN = INP220,
11KN = INP300, 22KN = INP360, 33 KN = INP400,
52/64 KN = INP450
• Explosion protected model in High execution suitable
up till Ex Class Ex II 2 G IIC T3 (Zone 1)
• Non Sparking protection of fast moving mechanical
contact parts of the hand chain movements and
internal fast moving hoist parts, extended with
bronze trolley wheels, non sparking top and load
hook and stainless steel non sparking hand chain.
(Reduced capacity)
Optional:
• Stainless steel name plate
• Overload protection
• Temperature class T4 will be observed separately for
each project
Hoist-Trolley units / Hand driven / Low headroom / Explosion Protected ATEX HIGH
Capacity
Kg.
Head
Room
G
No.
off
Falls
Trolley
Chassis
Type
Fixed for
beam
width
in range
mm.
DimensionsWeight
Kg.
3 mtr
Hoist / trolley
Push (3 mtrs)
ATEX HIGH
83940
Hoist / trolley
Geared (3 mtrs)
ATEX HIGH
83945
Hoist
Loadchain
Lifting height
Price / m €
Hoist & trolley
Handchain
Control height
Price / m €
Overload
Protection
Price €
A B C E F F1 R T L M N O n
Art. Nr. Price € Art. Nr. Price €
500 210 1 6 KN 55-300 45 60 15 15 30 24 75 33 285 - - - - 12 ..-00600 -
1.000 245 1 11 KN 55-300 60 75 18 20 36 29 99 42 345 65 90 100 2.5m 22 ..-01100 ..-01100
1.250 315 1 22 KN 74-300 80 100 22 27 42 34 123 49 430 65 90 100 2.5m 40 ..-02200 ..-02200
2.000 370 1 33 KN 90-300 100 120 25 35 48 39 144 59 505 70 95 100 2.5m 60 ..-03300 ..-03300
3.750 475 3 52 KN 106-300 125 150 30 40 56 47 174 65 640 100 130 135 2.5m 75 ..-05200 ..-05200
Remark: These units will be manufactured on a fi xed beamwith in the range as specifi ed in the table.
OB A
E
N
LIF
TG
C
F1
F
M
T
n
R
L
HIGH
56
Hoist-Trolley units | Hand driven / Ultra low headroom / EX.
E
U N
L
Rn
O
GLI
FT
F
F1
AB
C
Technical information:
1) Capacity up till 25 ton possible.
2) Non corrosive treatments, special surface protection for
aggressive environments, outdoor applications, offshore
& marine environments. Reference to page 42 of this
catalogue for detailed application information.
Features:
• Low in weight, Ultra Low headroom
• Complete unit with standard surface treatment, 2
layer Alkyd paint 80 μm, orange colour RAL2008
• Explosion protected model in Basic execution
suitable up till Ex Class Ex II 3 G IIB T3 (Zone 2)
• Non Sparking protection of fast moving mechanical
contact parts of the hand chain movements and
internal fast moving hoist parts
• Hoist with electric galvanized chains
• Explosion protected model in Medium execution
suitable up till Ex Class Ex II 2 G IIB T3 (Zone 1) Non
Sparking protection of fast moving mechanical
contact parts of the hand chain movements and
internal fast moving hoist parts, extended with non
sparking top and load hook. Hoist with electric
galvanized chains
• Explosion protected model in High execution suitable
up till Ex Class Ex II 2 G IIC T3 (Zone 1)
• Non Sparking protection of fast moving mechanical
contact parts of the hand chain movements and
internal fast moving hoist parts, extended with
bronze trolley wheels, non sparking top and load
hook and stainless steel non sparking hand chain.
(Reduced capacity)
• Temperature class T4 will be observed separately for
each project
Optional:
• Capacity > 6 ton
• Rubber buffers on trolley
• Load test, with certifi cate
• Overload protection
• Stainless Steel load chain, available
on request (reduced capacity)
Hoist-Trolley units / Hand driven / Low headroom / Explosion Protected
ATEX BASIC / MEDIUM ATEX HIGH
Capa-
city
ATEX
BASIC
/ME-
DIUM
Kg.
Head
Room
G
mm.
No.
off
Falls
Trolley
Chassis
Type
Fixed
beam
width
in range
mm.
Dimensions Weight
Kg.
3 mtr
Hoist / trolley
Geared (3 mtrs)
ATEX BASIC
83860
Hoist / trolley
Geared (3 mtrs)
ATEX MEDIUM
83865
Hoist
Loadchain
Lifting height
B/M
Price / m €
Hoist & trolley
Handchain
Control height
B/M
Price / m €
Capacity
ATEX
HIGH
Kg.
Hoist / trolley
Geared (3 mtrs)
ATEX HIGH
83960
Hoist
Loadchain
lifting
height
HIGH
Price / m €
Hoist &
trolley
Handchain
Control
height
HIGH
Price / m €
Overload
Protec-
tion
Price €
A B C E F F1 R L N U O n
Art. Nr. Price € Art. Nr. Price € Art. Nr. Price €
1.000 125 2 22 KN 74-300 80 100 22 20 36 29 226 500 140 105 100 2.5m 40 ..-01100 ..-01100 1.000 ..-01100
2.000 150 2 33 KN 90-300 100 120 25 20 42 34 266 600 145 150 135 2.5m 120 ..-02200 ..-02200 2.000 ..-02200
3.200 170 2 52 KN 106-300 125 150 30 26 48 39 310 685 175 150 135 2.5m 150 ..-03300 ..-03300 2.500 ..-03300
6.000 285 2 84 KN 119-300 160 190 35 33 75 68 430 965 225 200 300 2.5m 300 ..-05200 ..-05200 4.000 ..-05200
Remark: These units will be manufactured on a fi xed beamwith in the range as specifi ed in the table.
57
Cranes | Hand operated / Under slung crane / EX.
Detail: Y
Detail: X
Y
X
S+500
M
S
H
BA
2
LR
B+4mm
Technical information:
1) Max. Girder defl ection 1/600 of span.
Mentioned values are for complete
manual driven cranes.
2) Values mentioned between (....) are
corresponding a girder defl ection of
1/750 of span. This value shall be
used for cranes with electric driven
hoist and trolley or crane travel
motions.
3) Maximum INP Gantry for: ø 80/100S
= INP 360, ø 125/150S = INP 450
Features:
• Van Leusden under slung cranes are available as com-
plete cranes as well as crane kits for self-construction.
• Explosion protected model in Basic/Medium
execution suitable up till Ex Class Ex II 2 G IIB T3
(Zone 1&2) Non Sparking protection of fast moving
mechanical contact parts and rubber buffers on crane
• Explosion protected model in High execution suitable
up till Ex Class Ex II 2 G IIC T3 (Zone 1)
• Non sparking protection of fast moving mechanical
contact parts rubber buffers, increased with non
sparking protection of crane wheels and hand chains
• The suspended under slung cranes are executed with
solid material single fl ange wheels, suitable for all
kinds of crane gantries.
• The cranes are of low maintenance type en have
limited wear and tear parts
• The cranes delivered complete with
• Manual geared drive
• Control height 3 m, control chain
• Surface protection Shot blasting + primer + top coat
in RAL1007
• S.W.L. Sticker
• Users manual
• Crane kits for crane-constructors:
• A complete set of wheel boxes, with transversal shaft,
bearing blocks, hand chain wheel, hand chain, accom -
panied by a dimensional sketch. Shot blasted + primer
• Basic welding execution, Crane girder to be welded
to the wheelboxes
• Crane girder to be provided by crane-constructor.
Optional:
• Wheel boxes with screw fi ttings to the crane girder.
• Higher capacities, double girder cranes, low
headroom types
• Special executions as low headroom etc.
• Special surface treatment
• For suitable Hoist and Trolley units see our other
catalogue pages
Cranes / Hand operated / Underslung crane / Explosion protected (Art. group 86000) ATEX BASIC/MEDIUM/HIGH
S.W.L.
Kg.
S
m1) 2)
R
mm
L
mm
Wheels
mm
A2
mm
Max. Weight.
Hoist+Trolley
Kg.
Max.
Wheelbox
load
KN
Handchain
Force
Kg.
Crane
86210..
Art. Nr.
Price Crane Excl.
Hoist/Trolley
BASIC / MEDIUM
Ex II 2G IIB T3
Price €
Price Crane Excl.
Hoist/Trolley
HIGH
Ex II 2G IIC T3
Price €
Crane Kit
86260..
Art.Nr.
Crane Kit
BASIC / MEDIUM
Ex II 2G IIB T3
Price €
Crane Kit
HIGH
Ex II 2G IIC T3
Price €
Screw Fittings
Boltset
incl.
Price €
500
- 4.10 (- 3.70) 800 1005 80/100S 150
100
7.0 10 ..05001 ..05001
- 5.25 (- 4.75) 800 1005 80/100S 170 7.6 10 ..05002 ..05002
- 6.75 (- 6.00) 800 1005 80/100S 190 7.7 10 ..05003 ..05003
- 8.25 (- 7.40) 1000 1205 80/100S 210 8.1 11 ..05004 ..05004
1.000
- 3.95 (- 3.55) 800 1005 80/100S 170
105
12.3 15 ..10001 ..10001
- 5.00 (- 4.50) 800 1005 80/100S 190 12.4 15 ..10002 ..10002
- 6.00 (- 5.50) 800 1005 80/100S 210 12.5 15 ..10003 ..10003
- 7.50 (- 6.70) 1000 1205 80/100S 230 13.2 17 ..10004 ..10004
- 9.10 (- 8.10) 1200 1405 80/100S 250 14.1 20 ..10005 ..10005
2.000
- 3.40 (- 3.10) 800 1005 80/100S 170
150
22.3 19 ..20001 ..20001
- 5.75 (- 5.75) 800 1005 80/100S 250 23.4 21 ..20002 ..20002
- 7.75 (- 7.00) 1000 1205 80/100S 270 24.4 23 ..20003 ..20003
- 9.10 (- 8.10) 1200 1405 80/100S 290 25.6 24 ..20004 ..20004
3.200
- 5.50 (- 4.90) 800 1075 125/105S 230
175
33.8 21 ..32001 ..32001
- 6.50 (- 5.90) 1000 1275 125/105S 250 34.7 23 ..32002 ..32002
- 9.50 (- 8.80) 1400 1675 125/105S 330 36.8 25 ..32003 ..32003
- 11.00 (- 9.90) 1400 1675 125/105S 350 38.0 27 ..32004 ..32004
5.000
- 5.00 (- 5.00) 800 1075 125/150S 270
225
54.3 26 ..50001 ..50001
- 6.25 (- 6.25) 800 1075 125/150S 290 55.4 27 ..50002 ..50002
- 9.20 (- 9.20) 1200 1475 125/150S 390 58.1 30 ..50003 ..50003
58
Hoist-Trolley units | Hand operated / Overhead crane / EX.
X-XX
X
M
S+150
S
W
V
LR
A
B
H
B1
B2
A1
H
A2
Technical information:
1) Max. Girder defl ection 1/600 of span.
Mentioned values are for complete
manual driven cranes.
2) Values mentioned between (....) are
corresponding a girder defl ection of
1/750 of span. This value shall be
used for cranes with electric driven
hoist and trolley or crane travel
motions.
3) Changes in dimensions or prices
possible without pre-notice.
4) Specify A or B type crane with order.
Features:
• Van Leusden overhead cranes are available as complete
cranes and as crane kits for self-construction
• Explosion protected model in Basic/Medium
execution suitable up till Ex Class Ex II 2 G IIB T3 (Zone
1&2) Non Sparking protection of fast moving
mechanical contact parts and rubber buffers on crane
• Explosion protected model in High execution suitable
up till Ex Class Ex II 2 G IIC T3 (Zone 1)
• Non sparking protection of fast moving mechanical
contact parts rubber buffers, increased with non
sparking protection of crane wheels and hand chains
• The overhead cranes are executed with solid material
double fl ange wheels, suitable for fl at rails 50/30 mm
• The cranes are of low maintenance type en have
limited wear and tear parts
• The cranes delivered complete with:
• Manual geared drive
• Control height 3 m, control chain
• Surface protection Shot blasting + primer + top coat
in RAL1007
• S.W.L. Sticker
• Users manual
• Crane kits for crane-constructors:
• A complete set of wheel boxes, with transversal shaft,
bearing blocks, hand chain wheel, hand chain,
accompanied by a dimensional sketch. Shot blasted +
primer
• Basic welding execution, Crane girder to be welded to
the wheelboxes
• Crane girder to be provided by crane-constructor.
Optional:
• Wheel boxes with screw fi ttings to the crane girder.
• Higher capacities, double girder cranes, low
headroom types
• Special executions as low headroom etc.
• Special surface treatment
• For suitable Hoist and Trolley units see our other
catalogue pages
Cranes / Hand operated / Underslung crane / Explosion protected (Art. group 86000) ATEX BASIC/MEDIUM/HIGH
S.W.L.
Kg.
S
m1) 2)
R
mm
L
mm
Wheels
mm
A1
mm
A2
mm
B1
mm
B2
mm
Max. Weight.
Hoist+Trolley
Kg.
Max.
Wheelbox
load
[kN]
Handchain
Force
Kg.
Crane
86110..
Art. Nr.
Price Crane Excl.
Hoist/Trolley
BASIC/ MEDIUM
Ex II 2G IIB T3
Price €
Price Crane Excl.
Hoist/Trolley
HIGH Ex II 2G IIC T3
Price €
Crane Kit
86160..
Art.Nr.
Crane Kit
BASIC/ MEDIUM
Ex II 2G IIB T3
Price €
Crane Kit
HIGH
Ex II 2G IIC T3
Price €
Screw
Fittings
Boltset
incl.
Price €
500
- 4.10 (- 3.70) 800 1090 125/150 196 21 346 171
100
3.4 10 ..05001 ..05001
- 5.25 (- 4.75) 800 1090 125/150 196 21 346 171 3.8 10 ..05002 ..05002
- 6.75 (- 6.00) 800 1090 125/150 215 22 365 172 3.9 10 ..05003 ..05003
- 8.25 (- 7.40) 1000 1290 125/150 234 22 384 172 4.0 11 ..05004 ..05004
1.000
- 3.95 (- 3.55) 800 1090 125/150 215 22 365 172
105
6.0 15 ..10001 ..10001
- 5.00 (- 4.50) 800 1090 125/150 215 22 365 172 6.1 15 ..10002 ..10002
- 6.00 (- 5.50) 800 1090 125/150 234 22 384 172 6.3 15 ..10003 ..10003
- 7.50 (- 6.70) 1000 1290 125/150 253 23 403 173 6.5 17 ..10004 ..10004
- 9.10 (- 8.10) 1200 1490 125/150 273 24 423 174 6.9 20 ..10005 ..10005
2.000
- 3.40 (- 3.10) 800 1090 125/150 203 25 353 175
150
11.1 19 ..20001 ..20001
- 5.75 (- 5.75) 800 1090 125/150 273 24 423 174 11.5 21 ..20002 ..20002
- 7.75 (- 7.00) 1000 1290 125/150 293 25 443 175 12.0 23 ..20003 ..20003
- 9.10 (- 8.10) 1200 1490 125/150 313 25 463 178 12.6 24 ..20004 ..20004
3.200
- 5.50 (- 4.90) 800 1090 125/150 263 28 413 178
175
16.8 21 ..32001 ..32001
- 6.50 (- 5.90) 1000 1290 125/150 283 29 433 179 17.2 23 ..32002 ..32002
- 9.50 (- 8.80) 1400 1690 125/105 353 27 503 177 18.2 25 ..32003 ..32003
- 11.00 (- 9.90) 1400 1690 125/105 373 28 523 178 18.8 27 ..32004 ..32004
5.000
- 5.00 (- 5.00) 800 1130 160/180 305 32 505 232
225
27.1 26 ..50001 ..50001
- 6.25 (- 6.25) 800 1130 160/180 325 33 525 233 27.5 27 ..50002 ..50002
- 9.20 (- 9.20) 1200 1530 160/180 415 33 615 233 29.9 30 ..50003 ..50003
59
AIR HOISTS
Proven in practice : Air Hoists PROFI series are superior in all places where safety has
priority. Unlike electric current, the compressed air power driving medium does not
produce any ignition risk. This important advantage ensures Air Hoists PROFI are es-
pecially suitable for applications in hazardous areas.
For the last decades we have been cooperating in installing the PROFI air hoists in dif-
ferent markets, with great success.
Air Hoists PROFI series are very robust and therefore suitable for tough industrial as
well as offshore and maritime applications. Even conditions of continuous working pro-
cesses are no problem for these hoists. Various control systems are available. For mo-
ving the loads in horizontal direction we can provide you with a range of standard as
well as special drive systems with trolleys. All to meet you specifi c demands..
Air Hoists PROFI series are excellent and have proven their abilities is many markets :
Chemical industries, Oil and Gas plants Offshore and On Shore, Paint shops, Power
plants, Refi neries, Shipyards, etc., etc..
We have selected the best ranges of products that can be combined and comple-
mented with our own range of products. All kinds of special solutions are available on
request.
Proven in practice
60
Technical information:
Explosion Classifi cation ATEX 94/9/EEC:
1) Standard: EX II 2GD IIA T4(X) / EX II
3GD IIB T4(X)
2) With increased spark protection: EX II
GD IIC T4(X)
Features:
• Capacities 250 Kg – 100.000 Kg
• Air Pressure 4 Bar or 6 Bar
• Suitable for application in Hazardous areas
• Sensitive infi nitely variable speed control for the precise
positioning of loads
• Easy operation
• Suitable for lube free operation
• Frequent switching and extended duty cycles
• Fail safe starting, low maintenance vane motor
• Planetary gearbox with high grade steel gears
• Low maintenance
• Low headroom, Light Weight
• Insensitive to dust, humidity and temperatures ranging
from -20°C…+70°C
• From 1 ton upwards with overload protection
• Low sound emissions
Optional:
• Different options of control, cord control, pendant
control, E-type robust control.
• Air service units, Filter, Regulator
• Chain box
• Offshore coating
• Testing
• Spark resistant packages
Air Hoist | Profi TI / Heavy Duty
Air Hoists PROFI TI
Type 025 TI 05 TI 1 TI 2 TI 3 TI 6 TI 10 TI 16TI 20 TI 25 TI 37 TI 50 TI 100 TI
Air pressure bar 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 6 4 6 4 6 6
Carrying capacity t 0,16 0,25 0,32 0,5 0,63 1 1,25 2 3,2 6,3 10 16 20 25 37,5 50 100
Number of chain strands 1 1 1 2 1 2 2 3 4 2 3 4 4
Engine output kW 0,6 1 0,6 1 0,6 1 0,6 1 1,8 1,8 1,8 1,8 1,8 3,5 6 4 6 4 6 10
Lifting speed at full load m/min 20 10 5 2,5 2,5 1,2 0,8 0,5 0,4 0,7 1,1 0,4 0,65 0,3 0,45 0,35
Lifting speed without load m/min 37,5 42 16 19 10 11 5 5,5 6 3 2 1,3 1 1,4 2,3 1,1 1,6 0,7 1,3 0,7
Lowering speed at full load m/min 38 17 10 5 7,5 3,6 2,5 1,6 1,2 1,6 1,9 1 1,5 0,9 1,4 0,8
Air consumption at full load - Lifting m³/min 0,7 1,2 0,7 1,2 0,7 1,2 0,7 1,2 2 2 2 2 2 4 5,5 4,7 5,5 4,7 5,5 11
Air consumption at full load - Lowering m³/min 0,8 0,8 0,8 0,8 3,5 3,5 3,5 3,5 3,5 6,5 5,5 6,5 5,6 12
Air connection G ½ G ½ G ½ G ½ G ¾ G ¾ G ¾ G ¾ G ¾ G 1 G 1 G 1 G 1½
Hose dimension (Ø inside) mm 13 13 13 13 19/31 19/31 19/31 19/31 19/31 25/39 25/39 25/39 35/51
Weight at standard lift, rope control Kg 27 27 27 27 27,5 28² 34² 34² 86 110 156 240 285 498 880 855 2640
Chain dimension mm 7 x 21 7 x 21 7 x 21 7 x 21 13 x 36 13 x 36 16 x 45 16 x 45 16 x 45 23,5 x 66 23,5 x 66 23,5 x 66 32 x 90
Weight of 1 m chain Kg 1 1 1 1 3,8 3,8 5,8 5,8 5,8 12,2 12,2 12,2 21,3
Standard lift m 3 3 3 3 3 3 3 3 3 3 3 3 3
Length of control at standard lift m 2 2 2 2 2 2 2 2 2 2 2 2 2
Sound level at full load¹ - lifting dB(A) 73 74 74 74 74 74 74 74 74 83 77 77 88
Sound level at full load¹ - lowering dB(A) 77 77 77 77 79 79 79 79 79 83 79 79 89
Dimension in mm 025 TI 05 TI 1 TI 2 TI 3 TI 6 TI 10 TI 16 TI 20 TI 25 TI 37 TI 50 TI 100 TI
A smallest headroom * 450 450 450 498 593 674 813 898 1030 1260 1400 1700 2200
B 288 288 288 336 373 454 548 598 670 827 869 1144 1475
C 145 145 145 145 233 233 308 382 382 377 377 463 734
D 297 297 297 297 483 483 575 692 692 812 812 980 1505
E1 28 28 28 28 40 40 44 53 75 75 100 100 120
E2 28 28 28 28 30 40 44 53 75 75 100 100 120
F up to hook center 137 137 137 137 187 154 197 199 180 318 518 310 440
G biggest width 176 176 176 183 233 233 306 308 315 488 745 539 767
* Chain containers increase the headroom.
¹ measured in 1 m distance acc. to DIN 45635 part 20
² with overload protection
025TI_2TI 3TI_50TI
61
Technical information:
Explosion Classifi cation ATEX 94/9 EEC:
1) Standard: EX II 2GD IIA T4(X) / EX II
3GD IIB T4(X)
2) With increased spark protection: EX II
GD IIC T4(X)
Air Hoist | Profi TI / Trolley-Hoist combinations / Heavy Duty
Features:
• Capacities 250 Kg – 20.000 Kg
• Trolley/Hoist units in Manual, Push driven excellent
combination with HD3C trolley, see page 8 or other
applicable pages.
• Motor driven trolleys in standard geared motors or
with Rack and pinion drive systems.
• Air Pressure 4 Bar or 6 Bar
• Suitable for application in Hazardous areas
• Sensitive infi nitely variable speed control for the
precise positioning of loads
• Easy operation
• Suitable for lube free operation
• Frequent switching and extended duty cycles
• Fail safe starting, low maintenance vane motor
• Planetary gearbox with high grade steel gears
• Low maintenance
• Low headroom, Light Weight
• Sound absorption
• Insensitive to dust, humidity and temperatures ranging
from -20°C…+70°C
• From 1 ton upwards with overload protection
• Low sound emissions
Optional:
• Curved beams, curved toothrack beams.
• Different options of control, cord control, pendant
control, E-type robust control.
• Air service units, Filter, Regulator
• Chain box
• Offshore coating
• Testing
• Spark resistant packages
• Power supply systems by Spiral hose, energy chain or
c_rails with hose trolleys.
Air Hoists with Trolley PROFI TI
Type 025 TI 05 TI 1 TI 2 TI 3 TI 6 TI 10 TI 16 TI 20 TI
Carrying capacity of trolley LH and LM t 2 3,2 6,3 10 - 16 20
Carrying capacity of hoist with trolley t 0,25 0,5 1 2 3,2 6,3 10 16 20
Weight of Motor Trolley Kg 26 33 124 190 260
Weight of hoist with standard lift Kg 27 27 28 34 86 110 156 240 285
Total weight with standard lift of Motor Trolley Kg 53 53 54 60 119 234 346 430 545
Weight of 1 m chain Kg 1 3,8 5,8
Chain acc. DIN 5684-8 mm 7x 21 13x 36 16 x 45
Number of falls 1 2 1 2 2 3 4
Air pressure Motor Trolley bar 6
Air consumption Motor Trolley at nominal load m³/min 0,6 1,3
Air consumption of hoist at nominal load m³/min 1,5 5,5
Motor raiting Motor Trolley kW 0,2 0,7
Motor raiting hoist kW 1 3,5
Travelling speed of Motor Trolley at nominal load m/min 9*/14 5*/12
Hose connection Motor Trolley G 1/2 G ¾
Max. bottom fl ange thickness t Trolley mm 40 65
Max. bottom fl ange width b Trolley mm 280 310
Min. bottom fl ange width b Trolley mm 50 54 125 148
Sound level Motor Trolley ³ dB (A) 80
Type mm 025 TI 05 TI 1 TI 2 TI 3TI 6TI 10 TI 16 TI 20 TI
in Trolley mm LM 2 t LM 3,2 t LM6,3 t LM 10-16 t LM 20 t
A mm 250 292 500 490 490 600
Bmax. mm 130 113 141 146 146 155
C mm b + 36 b+60 b+70 b+68
d mm 70 84 165 165 165 185
D mm 185 191 205 318 318 328
E mm 137 187 154 197 199 180
F mm 39 79 109 109 135
G mm 145 233 233 308 382 382
H mm 152 250 250 267 310 310
J* min. headroom* mounted mm - 635 763 944 997 1140
J* suspended mm 563 798 919 1131 1216 1490
K mm 95 107 215 215 28 218
L mm 28 30 40 42 55 75
M mm 42 42 51 66 82 86
N mm 116 136 236 236 236 274
62
Technical information:
EH Monorail hoists are available with
air and hydraulic drive for the offshore
industry or wherever heavy loads
have to be moved in reduced spaces.
Depending on the application the
monorail hoist can be used in tandem
operation. For example in BOP
systems Third party acceptance by
DNV, ABS or Lloyd’s available on
request. Explosion Classifi cation ATEX
94/9/EEC:
1) Standard: EX II 2GD IIA T4(X) / EX II
3GD IIB T4(X)
2) With increased spark protection:
EX II GD IIC T4(X)
Features:
• Capacities 250 Kg – 20.000 Kg
• Motor driven trolleys in standard geared motors or with
Rack and pinion drive systems.
• Suitable for application in Hazardous areas
• Sensitive infi nitely variable speed control for the precise
positioning of loads
• Frequent switching and extended duty cycles
• Fail safe starting, low maintenance vane motor
• Planetary gearbox with high grade steel gears
• Low headroom, Light Weight
• Insensitive to dust, humidity and temperatures ranging
from -20°C…+70°C
• Low sound emissions
Optional:
• Different options of control, cord control, pendant
control, E-type robust control.
• Air service units, Filter, Regulator
• Chain box
• Offshore coating
• Testing
• Spark resistant packages
• Power supply systems by Spiral hose, energy chain or
c_rails with hose trolleys.
Air Hoist | Profi EH / Monorail Air Hoist Units / Heavy Duty
Monorail Air Hoist Units PROFI EH
Type EH 10 EH 16 EH 20 EH 25 EH 37 EH 50 EH 75 EH100
Carrying capacity t 10 16 20 25 37,5 50 75 100
Number of chain strands 2 3 4 2 3 4 3 4
Motor output Trolley kW 0,7 0,7 0,7 1,4 1,4 1,4 2,8 2,8
Motor output Hoist kW 3,5 3,5 3,5 6 6 6 10 10
Air pressure bar 6 6 6 6 6 6 6 6
Lifting speed at full load m/min 1,6 1 0,7 1,1 0,65 0,5 0,45 0,35
Lifting speed without load m/min 3,2 2 1,4 2,3 1,6 1,1 0,85 0,65
Lowering speed at full load m/min 3,4 2,1 1,6 1,9 1,5 0,9 1 0,75
Travelling speed at full load m/min 12 12 12 12 12 12 12 12
Travelling speed without load m/min 13,5 13,5 13,5 13,5 13,5 13,5 13,5 13,5
Air consumption Trolley m³/min 1,3 1,3 1,3 2,6 2,6 2,6 5,2 5,2
Air consumption Hoist m³/min 3,2 3,2 4 5,5 5,5 5,5 11 11
Air connection G_3/4 G_3/4 G_3/4 G 1_1/2 G 1_1/2 G 1_1/2 G 1_1/2 G 1_1/2
Hose dimension (Ø inside /Ø outside) mm 19/31 19/31 19/31 25/39 25/39 25/39 35/51 35/51
Weight with standard lift Kg 450 575 620 950 1450 1780 4000 5700
Chain dimension mm 16 x 45 16 x 45 16 x 45 23,5 x 66 23,5 x 66 23,5 x 66 32 x 90 32 x 90
Weight of 1 m chain Kg 5,8 5,8 5,8 12,2 12,2 12,2 21,3 21,3
Standard lift m 3 3 3 3 3 3 3 3
Length of control at standard lift m 2 2 2 2 2 2 2 2
Sound level at full load_ with standard silencer - lifting dB(A) 78 78 80 83 83 83 88 88
Sound level at full load_ with standard silencer - lowering dB(A) 80 80 84 83 83 83 89 89
Type EH 10 EH 16 EH 20 EH 25 EH 37 EH 50 EH 75 EH100
A max. mm 105 130 130 146 100 125 100 125
B mm 70 68 68 70 68 68 68 68
C mm 285 295 295 285 295 300 295 300
D mm 25 35 35 25 35 40 35 40
E mm 198 220 220 198 220 283 220 283
F* mm 705 750 820 998 1070 1150 1480 1535
G mm 138 213 202 170 190 420 286 575
H mm 44 53 75 75 100 100 120 120
J mm 192 185 266 350 455 340 740 470
K mm 580 600 600 1185 1730 1680 3210 3130
L mm 308 367 367 377 377 462 640 762
M mm 266 325 325 435 435 560 655 750
63
Air Hoist | Profi UH / Ultra low Monorail Hoists / Heavy Duty
Technical information:
Where Load have to be lifted and
transported in extremely reduced
spaces the PROFI Ultra low Monorail
Hoists provide the ideal solution.
Explosion Classifi cation ATEX 94/9/
EEC:
1) Standard: EX II 2GD IIA T4(X) / EX
II 3GD IIB T4(X)
2) With increased spark protection:
EX II GD IIC T4(X)
Features:
• Capacities 250 Kg - 16.000 Kg
• Motor driven trolleys in standard geared motors or
with Rack and pinion drive systems.
• Suitable for application in Hazardous areas
• Sensitive infi nitely variable speed control for the
precise positioning of loads
• Frequent switching and extended duty cycles
• Fail safe starting, low maintenance vane motor
• Planetary gearbox with high grade steel gears
• Low headroom, Light Weight
• Insensitive to dust, humidity and temperatures ranging
from -20°C…+70°C
• Low sound emissions
Optional:
• Different options of control, cord control, pendant
control, E-type robust control.
• Air service units, Filter, Regulator
• Chain box
• Offshore coating
• Testing
• Spark resistant packages
• Power supply systems by Spiral hose, energy chain or
c_rails with hose trolleys.
Ultra Low Headroom Monorail Air Hoist untis PROFI UH
Type UH 4 UH 6 UH 8 UH 12 UH 16 Dimensions
Carrying capacity t 4 6 8 12 16 A mm 195 305 195 305 305
Number of chain strands 2 2 4 4 4 B mm 200 200 200 200 200
Engine output kW 2,5 2,5 2,5 2,5 2,5 C mm 284 284 284 284 284
Air pressure bar 6 6 6 6 6 D mm 165 165 165 165 165
Lifting speed at full load m/min 3 2 1,4 0,9 0,65 E mm 236 236 236 236 236
Lifting speed without load m/min 6 4,5 2,9 2,2 1,2 F mm 330 330 283 283 283
Lowering speed at full load m/min 7,5 5,2 3,6 2,5 1,5 G mm 197,5 197,5 197,5 197,5 197,5
Air consumption Lifting -full load- m³/min 4 4 4 4 4 H min, 150 <=b <=310 mm 230 230
Air consumption Lowering -full load- m³/min 5,5 5,5 5,5 5,5 5,5 H min, 150 <=b <=230 mm - -
Air connection G ¾ G ¾ G ¾ G ¾ G ¾ H min, 230 <=b <=310 mm 276 276 315
Hose dimension (Ø inside /
Ø outside)mm 19/31 19/31 19/31 19/31 19/31 J mm 400 400 400 400 400
Weight at standard lift without
controlKg 460 470 540 550 560 K mm 535 535 535 535 535
Chain dimension mm 13 x 36 13 x 36 13 x 36 13 x 36 13 x 36 L mm 1000 1000 1000 1000 1000
Weight of 1 m chain Kg 3,8 3,8 3,8 3,8 3,8 M mm 40 40 44 44 53
Standard lift m 3 3 3 3 3 N mm 51 51 66 66 82
Lenght of control at standard lift m 2 2 2 2 2
64
Table for beamchoice for trolleys with handchainhoists. Acc. to DIN 120 Group 1, incl.
underfl ange defl ection DIN 4114.
For electr./air hoists choose one size bigger.
Beamchoice
Profi l 0.5 1 2 3.2 5 6.3 8 10 12.5 16 h b t
120 3.4 2.2 120 58 7.7
140 4.6 3.2 140 66 8.6
160 5.9 4.2 1.3 160 74 9.5
180 7.0 5.2 2.5 180 82 10.4
200 8.2 6.3 3.7 1.6 200 90 11.3
220 9.2 7.2 5.1 2.7 220 98 12.2
240 8.4 6.2 3.8 1.2 240 106 13.1
260 9.4 7.1 5.2 2.0 1.2 260 113 14.1
280 10.5 8.1 6.6 3.0 2.0 1.0 280 119 15.2
300 11.4 8.9 7.4 4.0 2.8 1.8 300 125 16.2
320 9.7 8.4 5.2 3.9 2.5 1.1 320 131 17.3
340 10.8 9.2 6.5 5.0 3.3 1.7 340 137 18.3
360 11.7 10.1 7.9 6.4 4.4 2.4 1.0 360 143 19.5
380 11.8 8.7 7.7 5.5 3.2 2.0 380 149 20.5
400 9.5 8.7 6.7 4.1 3.1 1.8 400 155 21.6
450 11.7 10.9 9.8 6.8 4.9 3.1 450 170 24.3
500 11.8 10.1 7.8 5.5 500 185 27.0
550 12.8 11.6 10.0 8.2 550 200 30.0
600 14.8 13.0 11.2 600 215 32.4
Profi l 0.5 1 2 3.2 5 6.3 8 10 12.5 16 h b t
100 2.2 0.5 100 55 5.7
120 3.4 1.0 120 64 6.3
140 4.4 2.1 140 73 6.9
160 5.6 3.3 160 82 7.4
180 6.7 4.9 1.1 180 91 8.0
200 7.7 5.9 1.8 200 100 8.5
220 8.8 6.9 3.1 220 110 9.2
240 9.9 8.0 4.5 1.6 240 120 9.8
270 11.3 9.2 6.3 2.6 270 135 10.2
300 12.5 10.5 8.3 4.0 300 150 10.7
330 11.8 9.4 6.0 330 160 11.5
360 10.6 9.0 2.9 360 170 12.7
400 11.8 10.3 4.6 2.7 400 180 13.5
450 11.5 7.5 5.0 2.2 450 190 14.6
500 10.8 8.0 4.7 1.1 500 200 16.0
550 11.2 7.4 2.9 550 210 17.2
600 11.2 6.0 600 220 19.0
Profi l 0.5 1 2 3.2 5 6.3 8 10 12.5 16 h b t
100 2.9 1.6 100 100 10.0
120 5.2 3.5 120 120 11.0
140 7.4 5.3 2.1 140 140 12.0
160 9.5 6.8 3.7 0.8 160 160 13.0
180 11.8 8.5 5.8 2.2 180 180 14.0
200 10.3 7.3 4.8 200 200 15.0
220 8.7 6.0 0.9 220 220 16.0
240 10.2 8.3 2.1 240 240 17.0
260 11.7 9.7 3.0 1.1 260 260 17.5
280 11.0 4.2 2.2 280 280 18.0
300 6.3 3.5 1.0 300 300 19.0
320 8.8 5.9 2.5 320 300 20.5
340 10.6 7.7 4.0 340 300 21.5
360 9.2 5.4 1.0 360 300 22.5
400 11.0 8.1 3.2 1.2 400 300 24.0
450 11.6 6.0 3.2 450 300 26.0
500 9.2 5.5 1.7 500 300 28.0
550 11.4 7.3 3.2 550 300 29.0
600 9.3 4.8 600 300 30.0
650 11.2 6.5 650 300 31.0
700 8.6 700 300 32.0
800 11.4 800 300 33.0
900 14.6 900 300 35.0
1000 17.4 1000 300 36.0
65
Sales Conditions
Delivery time
Delivery
Prices
Additional costs
administration.
Payments placement.
Claims
Returning goods
Disclaimer
Courtesy
Photography
Concept and design
TERMS OF DELIVERY
All our quotations, all orders placed with us and all contracts concluded with us, are
subject to the METAALUNIE CONDITIONS, as they read according to the text printed on
the last page of this catalogue. Upon request, the conditions of delivery and payment
will be sent to you for free as well.
Delivery time will be specifi ed by our sales department.
All our orders will be delivered EXW Incoterms 2000.
We shall specify the transport costs on our order confi rmation in advance,
if possible.
In Euro, (€), Excl. VAT. Price changes and printing errors are prohibited.
For orders < € 100,00 we will charge € 20,00 nett for handling and administration.
Payment schedules to be agreed with our sales department before order.
Within 14 days after receipt of the goods according to our Sales Conditions as
mentioned above.
Will be accepted on your notice and after our approval. Shipment to us will be CPT. Any
returning of goods caused by failure in ordering or missing information will be charged
with 10% returning costs.
All the products in this catalogue are subject to changes due to further
developments, improvements and innovation.
We reserve the right to modify, change or withdraw any data as printed in this
catalogue.
Liability for errors and printing errors shall not be accepted.
The prices and or deliveries for products from this catalogue are subject to the delivery
terms as printed on the last pages of this catalogue.
Photography courtesy of Bluewater International.
Stef Verstraaten
Puntkomma Nijmegen
66
Article 1: Applicability
1.1. These Terms & Conditions apply to all tenders issued by members of Koninklijke Metaalunie, to all agreements con-cluded by those members and to all agreements that may re-sult therefrom.
1.2. The tendering party/supplier is the Metaalunie member apply-ing these Terms & Conditions, and is referred to as ‘the Sup-plier’. The counterparty is referred to as ‘the Client’.
1.3. In the event of any conflicts between the substance of the agreement concluded between the Client and the Supplier on the one hand and these Terms & Conditions on the other, the provisions set out in the agreement have precedence.
1.4. These Terms & Conditions may only be used by members of Koninklijke Metaalunie.
Article 2: Tenders
2.1. No obligations are attached to any tenders.
2.2. If the Client supplies the Supplier with data, drawings etc., the Supplier may rely on their accuracy and shall base the tender on that information.
2.3. All prices specified in the tender are based on delivery ex works, in accordance with the Incoterms 2000. Prices are stated exclusive of VAT and packing materials.
2.4. If the tender is not accepted, the Supplier is entitled to charge the Client for all costs incurred in order to submit the tender.
Article 3: Intellectual property rights
3.1. Unless agreed otherwise in writing, the Supplier retains the copyrights and all industrial property rights to all tenders, de-signed submitted, illustrations, drawings, trial models, pro-grams, etc.
3.2. The rights listed in Article 3.1 remain the property of the Sup-plier, regardless of whether costs have been charged to the Client for their production. The relevant information may not be copied, used or shown to third parties without the Sup-plier’s explicit prior consent. The Client will be liable to pay the Supplier a penalty for each instance of violation of this provision, to the amount of €25,000. This penalty may be de-manded in addition to any compensation damages awarded by law.
3.3. The Client must return all data provided as meant in Arti-cle 3.1 on demand, within the period specified by the Sup-plier. If this provision is violated, the Client is liable to pay the Supplier a penalty of €1,000 per day. This penalty may be demanded in addition to any compensation damages awarded by law.
Article 4: Advice, designs and materials
4.1. The Client cannot derive any rights from advice or information provided by the Supplier that has no direct bearing on the en-gagement.
4.2. The Client is responsible for all drawings, calculations and designs made by or on behalf of the Client, and for the func-tional suitability of all materials prescribed by or on behalf of the Client.
4.3. The Client indemnifies the Supplier for any claims from third parties arising in connection with the use of the drawings, cal-culations, designs, materials, samples, models, etc. provided by or on behalf of the Client.
4.4. The Client may examine (or arrange for the examination of) the materials that the Supplier intends to use before they are processed, at the Client’s own expense. Any damages in-curred by the Supplier as a result are for the Client’s expense.
Article 5: Delivery times
5.1. The delivery deadline and/or work period stated by the Sup-plier are estimates.
5.2. In determining delivery deadlines and/or work periods, the Supplier assumes that the engagement can be carried out under the circumstances as they are known to the Supplier at that moment.
5.3. Delivery deadlines and/or work periods do not commence until the Parties have agreed on all commercial and technical details, all necessary data, final and approved drawings, etc. are in the Supplier’s possession, the payment or instalment agreed has been received and the conditions necessary for the performance of the engagement have been met.
5.4. a. In the event of circumstances that are different to those known to the Supplier when the delivery deadline and/or work period were determined, the Supplier may extend the delivery deadline and/or work period by the time that is re-quired in order to perform the engagement under those cir-cumstances. If the work cannot be fitted into the Supplier’s work schedule, it will be carried out as soon as the Sup-plier’s schedule permits.
b. In the event of contract extras, the delivery deadline and/or work period will be extended by the time required to supply (or arrange for the supply of) the materials and parts nec-essary for those contract extras and to carry out the con-tract extras. If the contract extras cannot be fitted into the Supplier’s work schedule, they will be carried out as soon as the Supplier’s schedule permits.
c. In the event that the Supplier’s obligations are suspended, the delivery deadline and/or work period will be extended by the duration that the obligations are suspended. If re-sumption of the work cannot be fitted into the Supplier’s work schedule, the work will be carried out as soon as the Supplier’s schedule permits.
d. In the event of weather conditions that prevent work being carried out, the delivery deadline and/or work period will be extended by the resulting delay.
5.5. If the delivery deadline and/or work period agreed is ex-ceeded, that circumstance does not in any instance entitle the Client to compensation for damages, unless agreed in writing.
Article 6: Transfer of risk
6.1. Deliveries are made ex works, in accordance with the Inco-terms 2000; the risks attached to the object are transferred at the moment that the Supplier makes the object available to the Client.
6.2. The provisions of Article 6.1 notwithstanding, the Client and the Supplier may agree that the Supplier will arrange trans-port. The risks attached to the storage, loading, transport and unloading remain with the Client in such instances. The Client may take out insurance to cover those risks.
6.3. In the event that objects are to be exchanged and the Client continues to use the exchangeable object while awaiting de-livery of the new object, the risks attached to the exchange-able object remain with the Client until the moment that pos-session of the object has been relinquished to the Supplier.
Article 7: Price changes
7.1. The Supplier may charge any increases in cost-determining factors that arise after the agreement is concluded to the Cli-ent if the performance of the agreement has not been com-pleted at the moment of the increase.
7.2. The Client is obliged to pay the price increases as meant in Article 7.1 at the same time as the principal sum or the next instalment is paid.
7.3. If the Client provides goods and the Supplier is prepared to use those goods, the Supplier may charge up to 20% of the market price of the goods provided.
Article 8: Impracticability of the engagement
8.1. The Supplier is entitled to suspend the fulfilment of any obli-gations if any circumstances that could not be foreseen when the agreement was concluded and that are beyond the Sup-plier’s influence temporarily prevent the fulfilment of those ob-ligations.
8.2. Circumstances that the Supplier could not foresee and that are beyond the Supplier’s influence are understood to include (but are not limited to) the circumstance that the Supplier’s own suppliers and/or subcontractors fail to meet their obliga-tions, or fail to do so in time, the weather, earthquakes, fire, loss or theft of tools, the destruction of materials to be proc-essed, road blocks, strikes or work stoppages and restrictions on import or trade.
8.3. The Supplier is no longer entitled to suspend the fulfilment of any obligations when the temporary impossibility of perform-ance has lasted for more than six months. The agreement may not be dissolved until that term has lapsed, and only in respect of those obligations that have not been fulfilled. In that event, the Parties are not entitled to any compensation for damages incurred as a result of that dissolution.
Article 9: Scope of the work
9.1. The Client is responsible for ensuring that all licences, per-mits, dispensations and other administrative decisions that are needed to carry out the work are obtained in time.
9.2. The price for the work does not include the following: a. the costs of earthwork, pile driving, demolition, foundation
work, cementing, carpentry, plastering, painting, wallpaper-ing, repairs or other construction work;
b. the costs of connecting gas, water, electricity or other in-frastructural facilities;
c. the costs of preventing or limiting damages to any objects situated on or near the work site;
d. the costs of disposing of materials, building materials or waste products;
e. hotel and travelling expenses.
Article 10: Changes to the work
10.1. Any changes to the work will result in contract variations in at least the following instances:
a. if the design or the specifications change; b. if the information provided by the Client does not match the
actual situation; c. in the event of deviation from estimated quantities by more
than 10%.
10.2. Contract extras will be charged based on the value of the cost-determining factors as at the moment that the contract extra is performed. Contract deductions will be settled based on the value of the cost-determining factors as at the moment that the agreement was concluded.
10.3. If the value of the contract deductions exceeds that of the contract extras, the Supplier is entitled to charge the Client for 10% of the difference upon final settlement. This provision does not apply to any contract deductions based on requests from the Supplier.
Article 11: Performance of the work
11.1. The Client is responsible for ensuring that the Supplier can carry out the activities without interruption and at the times agreed, and that the Supplier has access to the necessary fa-cilities when carrying out the activities, such as:
- gas, water and electricity; - heating; - lockable and dry storage space; - all facilities required by the laws and regulations governing
working conditions.
11.2. The Client is liable for all damages, including those resulting from loss, theft, burning or harm, to objects belonging to the Supplier, the Client and/or any third parties, such as tools and materials intended for use in the work that are located on the site where the activities are carried out or at another agreed location.
11.3. If the Client fails to fulfil the obligations as set out in Arti-cle 11.1 and 11.2, and that failure causes delays in the per-formance of the activities, the activities will be carried out as soon as the Client as yet fulfils those obligations and when the Supplier’s schedule permits. The Client is liable for all damages that the Supplier incurs as a result of the delay.
Article 12: Completion of the work
12.1. The project will be deemed to have been completed when: a. the Client has approved the work; b. the Client has put the work into use. If the Client puts part
of the work into use, that part will be deemed to have been completed;
c. the Supplier has notified the Client in writing that the work is finished and the Client has not communicated, within 14 days after than notification, whether or not the work has been approved;
d. the Client does not approve the work on grounds of minor defects or missing parts that can be repaired or provided within 30 days and that do not prevent the work from being put into use.
12.2. If the Client does not approve the work, the grounds on which the approval is withheld must be communicated to the Sup-plier in writing.
12.3. If the Client does not approve the work, the Supplier must be given another opportunity to complete the work. The provi-sions set out in this Article apply anew.
12.4. The Client indemnifies the Supplier against all claims from third parties for damages to parts of the work that have not yet been completed that are caused by use of parts of the work that have already been completed.
Article 13: Liability
13.1. The Supplier is liable for all damages that the Client incurs that stem directly and exclusively from a shortcoming attribut-able to the Supplier. However, only those damages for which the Supplier is insured, or should within reason have been in-sured, qualify for compensation.
13.2. If, when the agreement is concluded, it is impossible for the Supplier to take out insurance as meant in Article 13.1, or im-possible to do so at reasonable conditions, or if it is subse-quently impossible to renew the insurance policy at reason-able conditions, the maximum compensation payable for damages is the amount that the Supplier charged for the agreement in question (exclusive of VAT).
13.3. The following damages do not qualify for compensation: a. trading losses, including losses caused by delays and loss
of profits. The Client should take out insurance to cover such damages, if such is deemed desirable;
b. supervision damages, which are understood to include damages caused, during or as a result of the performance of the work, to objects on which work is being carried out to objects situated in the vicinity of the work site. The Cli-ent should take out insurance to cover such damages, if such is deemed desirable;
c. damages caused by intent or gross negligence on the part of helpers or non-management employees of the Supplier.
13.4. The Supplier is not liable for damages to materials provided by or on behalf of the Client that result from improper proc-essing. At the Client’s request, the Supplier will repeat the process, using materials provided by the Client, at the Client’s expense.
13.5. The Client indemnifies the Supplier against all claims from third parties for product liability stemming from defects in products provided by the Client to third parties that consisted of or included products and/or materials provided by the Sup-plier.
Article 14: Guarantees
14.1. The Supplier guarantees the proper performance of the prod-uct or service stipulated for a period of six months after deliv-ery or completion.
14.2. If the product or service stipulated consists of contract work, the Supplier guarantees the soundness of the construction delivered and the materials used, if the Supplier was at liberty to choose those materials, for the period specified in Arti-cle 14.1.
If the construction delivered and/or the materials used prove to be unsound, the Supplier will make the necessary repairs or replacement. Those parts that are to be repaired at the Supplier’s place of business or are to be replaced by the Supplier must be sent to the Supplier carriage paid. Disas-sembly and assembly of those parts, plus any hotel and trav-elling expenses, are for the Client’s account.
14.3. If the product or service stipulated (partly) consists of the processing of materials provided by the Client, the Supplier guarantees proper processing for the period specified in Arti-cle 14.1.
If any processing proves to have been performed improperly, the Supplier will do one of the following, at the Supplier’s dis-cretion:
- repeat the process, in which case the Client must provide new materials, at the Client’s own expense;
- repair the shortcoming, in which case the Client must re-turn the materials to the Supplier carriage paid;
- credit the Client for a proportionate part of the invoice.
14.4. If the product or service stipulated consists of the delivery of an object, the Supplier guarantees the soundness of the ob-ject delivered for the period specified in Article 14.1.
If the delivery proves to have been defective, the object must be returned to the Supplier carriage paid. The Supplier will then elect either:
- to repair the object; - to replace the object; - to credit the Client for a proportionate part of the invoice.
14.5. If the product or service stipulated (partly) consists of the fit-ting and/or assembling of a delivered object, the Supplier guarantees the soundness of the fitting and/or assembly for the period specified in Article 14.1.
If the fitting and/or assembly prove to be defective, the Sup-plier will repair the fault. Any hotel and travelling expenses are for the Client’s account.
14.6. Factory guarantees apply to those parts for which the Client and the Supplier agree such explicitly and in writing. If the Client has had the opportunity to examine the substance of the factory guarantee, that factory guarantee will replace the guarantees specified in this Article.
14.7. In all situations, the Client must allow the Supplier the oppor-tunity to repair any shortcomings and/or repeat the process-ing.
14.8. The Client may only invoke guarantees after all obligations in respect of the Supplier have been fulfilled.
14.9. a. No guarantee is given when defects are the result of: - normal wear and tear; - improper use; - lack of proper maintenance; - fitting, assembly, alterations or repairs by the Client or
by third parties. b. No guarantee is given for delivered objects that were not
new when they were delivered of for objects whose use the Client prescribed or that were provided by or on behalf of the Client.
c. No guarantee is given on inspections of and/or repairs to objects belonging to the Client.
Article 15: Complaints
The Client may not invoke defects in the product or service unless a written complaint has been submitted to the Supplier within four-teen days after the defect was detected or should, within reason, have been detected.
Article 16: Failure to take delivery
In the event that the Client has not taken delivery of any object after the delivery deadline has passed, those objects will remain avail-able to the Client. Any objects of which the Client has not taken delivery will be stored for the Client’s account and risk. The Sup-plier may at any time invoke the powers granted by Article 6:90 of the Dutch Civil Code.
Article 17: Payment
17.1. Payment must be made at the Supplier’s place of business or to an account specified by the Supplier.
17.2. Unless agreed otherwise, payment must be made using one of the following methods:
a. for counter sales: cash; b. for payment in instalments: - 40% of the total price when the engagement is granted; - 50% of the total price when the materials have been
delivered or, if the engagement does not include deliv-ery of the materials, upon commencement of the activi-ties;
- 10% of the total price upon completion; c. in all other instances: within thirty days after the date on
the invoice.
17.3. The payment conditions specified notwithstanding, the Client is obliged, at the Supplier’s request, to provide security for payment, to the Client’s satisfaction. Failure on the Client’s part to provide such security for payment within the period specified will immediately constitute default. In that event, the Supplier is entitled to dissolve the agreement and recover any damages from the Client.
17.4. The Client’s right to offset any claims on the Supplier is ex-cluded, except in the event of the Supplier’s bankruptcy or if judicial debt rescheduling is applied in respect of the Supplier.
17.5. The full claim for payment is payable on demand in the follow-ing instances:
a. if any payment deadline has been exceeded; b. if the Client has been declared bankrupt or requests sus-
pension of payments; c. if any of the Client’s assets or claims are seized; d. if the Client (if a company) is dissolved or wound up; e. if the Client (if a natural person) makes a request for judi-
cial debt rescheduling, is placed under guardianship or dies.
17.6. If payment has not been made by the payment deadline specified, the Client is immediately liable to pay the Supplier interest. That interest is payable at a rate of 12% per year, or at the statutory rate if that is higher. For the purposes of cal-culating the interest, partial months are counted as full months.
17.7. If payment has not been made by the payment deadline specified, the Client is immediately liable to pay the Supplier all extrajudicial costs, to a minimum of €75.
The costs are calculated in accordance with the following ta-ble:
over the first €3,000 15% over the excess up to €6,000 10% over the excess up to €15,000 8% over the excess up to €60,000 5% over the excess from €60,000 3%
If the actual extrajudicial costs exceed those based on this formula, the Client is liable to pay the actual costs.
17.8. If judicial proceedings are decided in the Supplier’s favour, all costs incurred by the Supplier in connection with those pro-ceedings are for the Client’s account.
Article 18: Retention of ownership and pledging
18.1. After delivery, the Supplier remains the owner of the objects delivered for as long as:
a. the Client fails or will fail in the fulfilment of the obligations stemming from this agreement or any similar agreements;
b. the Client fails or will fail to pay for any work performed or to be performed under such agreements;
c. the Client has not paid any claims arising from non-fulfilment of those agreements, such as compensation for damages, penalties, interest and costs.
18.2. As long as any objects are subject to retention of ownership, the Client may not encumber those objects in any way that exceeds the scope of the Client’s ordinary activities.
18.3. Having invoked retention of ownership, the Supplier may re-trieve the objects delivered. The Client must allow the Sup-plier to enter the place where those objects are located.
18.4. If the Supplier cannot invoke retention of ownership because the objects delivered have been subject to confusion, defor-mation or accession, the Client is obliged to give the newly formed objects in pledge to the Supplier.
Article 19: Termination
If the Client wishes to dissolve the agreement without the Supplier having failed in the performance thereof and if the Supplier so agrees, the agreement will be terminated by mutual consent. In that event, the Supplier is entitled to reimbursement for all financial losses incurred, such as damages, loss of profits and costs.
Article 20: Applicable law and competent court
20.1. These Terms & Conditions are governed by the laws of the Netherlands.
20.2. The Vienna Sales Convention (C.I.S.G.) does not apply to these Terms & Conditions, nor do any other international regulations whose exclusion is permitted.
20.3. Only the Dutch civil court within whose jurisdiction the Sup-plier’s place of business is situated is competent to pass judg-ment on disputes, unless such is at odds with any mandatory rules of law. The Supplier is entitled to deviate from this juris-diction clause and apply the statutory rules for jurisdiction.
20.4. The Parties may agree on another form of dispute settlement, such as arbitration or mediation.
These conditions are a full translation of the Dutch version of the ‘METAALUNIEVOORWAARDEN’ as deposited with the Registry of the District Court in Rotterdam on 1 January 2008. Explanation and interpretation of the text of these Conditions shall be based on the Dutch text.
METAALUNIE CONDITIONS General delivery and payment conditions of Koninklijke Metaalunie (the Dutch organisation for small and medium-sized enterprises in the metal industry), referred to as ‘the METAALUNIE
CONDITIONS’, formerly referred to as ‘the SMECOMA CONDITIONS’, filed with the Court Registry in Rotterdam on 1 January 2008.
Published by Koninklijke Metaalunie, PO Box 2600, 3430 GA Nieuwegein, the Netherlands. Koninklijke Metaalunie
Van Leusden B.V.
P.O. Box 1154870 AC Etten Leur
The Netherlands
Phone +31 76 50 34 255Fax +31 76 50 34 966